Figurines for the garden made of tires. Crafts from tires in the country house or garden

How can you further improve the area adjacent to your home? Purchase of decorative landscape elements not everyone can afford it.

However, don't worry: it will be possible to give the territory an unusual appearance and minimal costs . One of the ways to improve the area yourself is garden figures from car tires. Used tires are available free of charge at most services. The only resource needed in large quantities, there will be time.

At first glance, it seems that it will not be possible to achieve an interesting result, but the examples below can overcome a pessimistic attitude.

Original ideas for creating crafts from tires

Tires serve suitable material to implement the most interesting ideas. Thanks to the fact that you don’t feel sorry for them, you can realize your ideas an unlimited number of attempts, after which you will definitely end up with funny country crafts from car tires. What non-trivial designs can be made?

Idea one: unusual flower beds made from tires

As a rule, dacha owners are concerned only with the functional side of these structures, so floral flower bed from old tire is not formalized in any way. This solution looks dull and uninteresting. With a little effort, these products can be significantly transformed: you can make any image or object from old tires with your own hands.

For creating interesting combination paint will be needed big knife, wire and a little imagination. Two flower beds can be placed opposite each other, depicting tea pairs. To implement the idea you will need 4 tires. To make the flower beds shaped like cups, rubber of a smaller radius will be used in the lower tiers, and larger tires in the upper tiers.

Additional elements of the composition can be made from the outer sidewalls of large tires. These pieces are enough to create a saucer rim, a smaller diameter tire base, and handles for the cups. It is advisable to fasten all parts of the structure with wire.

It is better to paint the resulting cups and saucers in bright colors. If the house has an interesting service, an enlarged copy of it on the site would be an excellent solution. The end result is an attractive bed of tires.

In addition to this composition, you can organize other unusual solutions: hanging tires with a plywood base nailed to a tree or folding them into interesting geometric shapes.

Flower bed made of tires. Video

Step-by-step photo of making a flower bed from a tire

Idea two: tire figures on the site

Although these elements do not carry a functional load, they will add warmth to the dacha. Hosts, guests and, most importantly, children will definitely smile when they see garden figurines from tires.

Inspiration for their creation can be drawn from cartoons, fairy tales and legends. They represent an inexhaustible source of fantasy. Using a simple tool and available materials you can create characters such as a fairy-tale frog, a swan princess or a steadfast tin soldier.

By cutting the tires in half and joining them in the shape of waves, you can get the Serpent Gorynych. However, it will take some work to get a better resemblance. From finely chopped parts of tires you can create the scales and head of this monster.

For greater resemblance to the original, it is better to attach additional elements from scrap materials.

Idea three: country furniture

You can’t get around the option of making it from tires convenient items situation. Inside the house, tables, armchairs and chairs will look interesting, the basis of which is rubber, upholstered on the outside with materials of different textures and colors.

The simplest items, such as ottoman, you can make it from old tires with your own hands, spending less than an hour on the process. The upholstery elements will be attached to each other inside the tire. You can also use plywood sheets screwed to the sidewall of the tire using a screwdriver.

The only important parameter is the state cord. If it sticks out, it is better to use another tire, since sitting on such a pouf will be uncomfortable.

Video: garden furniture from car tires

Step-by-step photos of making a pouf from a tire

Idea four: tire swings

Nothing can delight children as much as swing. The place in which they are installed inevitably becomes the center of attraction for the attention of all household members. By using tires to build a swing, you can significantly save on costs and provide better safety for small family members.

If there is a large tree on the site, then making this structure will not be difficult. For stability, the branch must be parallel to the ground and be ready to bear the load. The tools you will need are a jigsaw and a knife. In addition to the tire, you will need to find a strong rope or chain. If the latter is used, then you will additionally need carabiners to secure the tire.

In the case of using a rope, the procedure will be as follows:

1. A loop is tied on the rope, after which it is thrown over the branch;
2. The free end is inserted into the loop and tightened. You will definitely need to check the reliability of the node;
3. The lower end of the rope is threaded through a tire with the tread facing up;
4. Having adjusted comfortable height After tightening the knot on the tire and checking the strength of the connections, you can use the swing.

If children are still very young, it is recommended that their use of the structure be supervised by adults.

How to make a swing from a tire: video

There are also more non-trivial designs for swings made from tires in the country. You can cut a swing yourself from tire rubber unusual shape, reminiscent of animals or fairy-tale characters.

Idea five: country paths made of tires

One of the most popular methods of “reincarnation” of tires that have fallen into disrepair is the creation of paths in the countryside. This method of use allows you to maintain cleanliness in your country house even under the most unfavorable weather conditions.

Compared to concreting, this option is not associated with huge costs. Another advantage of a path made from old tires is that it does not sink into the ground like gravel and will last a long time.

For fast work It's better to choose the best tires possible larger diameter. Such blanks will significantly reduce the time spent on making tracks.

In addition to tires, you will need wide boards, as well as screws or nails. The tool you will need to prepare is a large sharp knife, a screwdriver or a hammer.

The technology itself is not complicated and consists of the following stages:

1. Preparing rubber. Use a knife to remove the tire sidewalls. The remaining part is cut across the tread. The result should be a rubber strip. In this way you need to prepare required amount material;
2. Fastening rubber to wood. Using a hammer and nails, or a screwdriver and self-tapping screws, the existing strips are attached on top wooden base future path.
3. Soil preparation. If there has been no precipitation for a long time, you will need to fill the ground under the places where the boards are laid with water. The condition of the soil should ensure that the boards do not sink into the ground;
4. Laying elements. The placement of track parts must be approached responsibly. In order for the structure to last for a long time, you will need to carefully compact each part of it.

To give garden paths For a more fun-looking tire, the rubber can be pre-painted. It is important that the coating is not slippery in winter or during rainfall. Otherwise there is a risk of injury.

A great idea would be to make do-it-yourself linings from old tires. country stairs. This will give a more aesthetically pleasing appearance old steps and prevent the risk of slipping.

The most popular ways to give a second life to old tires

Ideas for creative use of tires really great amount. However, there are a number of crafts and structures that are most often found at the dachas of compatriots. What is the most popular choice?

Pool made from an old tire

An interesting option is pool from an old tire. For such a structure you will need to look for a tire big size, used on a large tractor or special equipment.

Preparing a pool is not difficult. The work will consist of attaching a material to the tire that forms a sealed bottom, resting on a dense surface.

To work you will need following materials and tools:

• Waterproof material;
• Glue for rubber;
• Degreaser;
• Putty-sealant;
• Scissors.

Since the bottom of the pool will consist of thin material, you should select an installation location in advance where there will be no sharp stones, branches or other objects that could damage the bottom or cause injury. On the other hand, this area should not be soft. Otherwise, the glued material will probably come off along the seam.

At the first stage, you will need to prepare the surfaces of the elements to be glued at the place of their future contact. To do this, you will need to clean them of fat using any suitable means.

Next, the cleaned surfaces are lubricated glue and connect. At the same time, you should not feel sorry for it, since excess can be removed, and if there is a deficiency, the pool may leak. When the glue sets, you will need to turn the wheel over so that the seam is under pressure.

A day later, the place of contact from the inside of the pool is treated with adhesive sealant. After an additional 24 hours, you can fill it with water and enjoy bathing in hot weather.

DIY tire swan

This bird is one of the most common dacha figures. With sufficient perseverance, you can achieve interesting results. For the job, one car tire, thick wire, two small clamps supporting the swan's neck, as well as white and red paint will be enough.

The tool you will need is a jigsaw with the ability to cut metal threads, as well as a marker. To protect your eyes and body from sawdust generated when cutting cord, it is better to use thick clothing and work glasses.

The work will consist of the following parts:

1. Preparation tires for cutting. Using a marker, two semicircles are drawn in the center on one of the sidewalls of the tire, the top of which will serve as a blank for the tail and head;
2. cutting. It is carried out along the marked line when preparing the head and neck. The tail is cut in the shape of a triangle at the top of the sidewall, the sides of which go towards the tread. On the sides, between the tread and the drawn lines, three cuts are made for the wings.
3. Formation. In places where the side cuts are made, parts of the tires turn outward, forming wings. The tail arches in the same way. The wire is attached with two clamps to a long rubber strip at the base and at the top.
4. Painting. The main part of the figure is covered in white, and the beak will be red.

The result should be a swan that can be used as a flower bed. In addition to this option, there are other ways to make this figurine.

Video instructions on how to make a swan from a tire

Other interesting tire installations

If as a result of a rodent attack or winter cold I had to cut off the branches garden trees, you can improve the situation by temporarily making a palm tree from an old tire. To do this, you will need protectors separated from the tires, which can be shaped like tropical leaves. Surprise of neighbors will be guaranteed!

Protectors separated from the sidewalls, painted in green color very reminiscent of a crocodile. The image of reptiles can be complemented by an open mouth, for which sections of the protector can be secured in a characteristic way. It is worth cutting out triangular teeth from small fragments of rubber and painting them in light color and attach it to the crocodile.

It won't be difficult to make an elephant. Even one tire is enough. Half of it will form the body, and the protector of the other part will become the trunk. The sides will make excellent ears. For tusks, you can use tire mounting elements.

Figures of turtles are also very popular. To a lying car tire, it is enough to attach 4 small tread elements that imitate paws, and the same parts for the head and tail. After painting, you will get an interesting flowerbed, reminiscent of a creature that is in no hurry.

Photos of country crafts made from tires

Tires standing in a row, cut in half, serve as very convenient bicycle parking. Elastic rubber will hold any size wheel.

If the old tire is on the rim, there is no need to remove it. After some work with a jigsaw, the wheel will become a reliable stand for an unusual flowerpot.

An aggressive piranha, attached to a stalk in the middle of the garden, will scare away thrushes and other impudent lovers of dacha plantings.

A donkey moving a flowerbed on wheels serves as a very non-trivial country installation that any guest of a country house will appreciate.

If there are swings for people, then why not make swings for flowers. Suddenly they will begin to bloom better!

The swans are already there. Apparently there will be a lake soon!

The pink flamingo will definitely become the favorite of all the little household members.

Crocodile from an old tire

It’s always nice to make something useful out of a junk item, and if the craft turns out to be beautiful, it’s double the pleasure. One example is crafts made from tires. They are used to make decorations for the country house or garden plot, various flowerpots and flower beds, build children's attractions and even make country furniture- tables and chairs.

Flower beds and flower beds made from tires

Let's start with, perhaps, the simplest flower beds and flower beds. Do you think it’s difficult to make a multi-tiered one? Maybe, but not from tires. Take a few pieces different sizes, paint them in bright colors and stack them in a pile - one on top of the other. To prevent your slide from falling apart, fasten the tires from the inside using a screwdriver and self-tapping screws. Two per connection will be enough. You fill the soil inside and plant the plants. To prevent the soil from spilling out, you can cover the inside of the tire with a piece of . It will remove excess water, but will not allow the soil to spill out. A beautiful tiered flower garden is ready.

If you like flower beds correct form, you can do something like this. For example, making a flower bed in the shape of a chamomile out of tires. First, the tires in the lower tier are laid out and fastened together. Fill the middle of the tires with earth, as well as the free space inside the circle. There for better drainage can be laid broken brick or other construction garbage, sprinkle a little earth on top and tamp down. On the prepared surface, stepping back from the edge by more than half the diameter of the tire, lay out the second tier. They are also fastened together, the middle is covered with soil, and the core is placed on top. You can plant tall flowers at the very top, and border or low-growing flowers on the lower tiers.

Another option for a flowerbed made of tires in the shape of a chamomile - in one tier. To do this you will have to cut the tires.

How to cut tires

In general, when making crafts from tires, they often need to be cut. This is far from easy. Can be cut off more or less easily lateral surface from the tread. People with strong hands And good knives do this manually. By the way, a good workout for the hands and the entire shoulder girdle. If you are going to cut with a knife, lubricate the blade with grease: the rubber constantly “jams” the metal, and the blade covered with grease slides out well.

You can also cut off the sidewall with a jigsaw or grinder. Cutting with a grinder is relatively quick, but the stench is wild. Therefore, with a grinder, even if there is one, only the first cut is made so that the jigsaw file can be inserted. Then they work with this tool. To cut rubber, take a blade with a reverse tooth made of good steel.

If you have to cut the tread, doing it with a jigsaw or, especially, with a knife is useless. At least with a regular knife. Blades made of special steel can even cut iron cord, but it’s unlikely that anyone would want to disfigure such a tool. old tire. That’s why they most often work with an angle grinder. To avoid any troubles, the protector is secured: always think about safety. If the sidewalls have already been cut off, the tread tape is quite elastic and can be compressed with a clamp. Once cut, it will not spring back.

Flowerpot from a wheel: turning the tires out

If you have a tire with an old rim, you can use it to make a flowerpot with a leg.

To do this, cut one sidewall along the tread. And they turn it inside out. This is not an easy task: considerable physical strength and perseverance are required. The rubber is elastic and it is impossible to turn it out the first time. If absolutely not, then outside make notches across the tread. They should be quite deep, but not through. It will also help if you make cuts along the edge with a depth of at least 5-7 centimeters. They will look like fringe on an inverted tire.

Why do they turn it inside out? The inner surface is smoother, and the shape can be more interesting, especially if the edge is made not linear, but jagged. The result will be a gracefully bent decoration.

For details on how to turn out a tire, watch the video.

In a similar way, you can turn out a tire without rim. The sequence of actions is the same. First, cut off one of the sidewalls - straight or zigzag. To ensure that the “petals” are even, it is advisable to mark them. It is convenient to do this with chalk. The mark is then cut with a jigsaw or knife (if the cord is synthetic).

They turn it like this: they step on inner part tires, grab the edge with your hands and pull up and towards you. It is important to achieve the first result: when at least some part is bent. If the tire looks like the photo below, it's already a success. It is developed by successively turning the edge inside out and standing on the already turned part so that it does not turn back.

Watch the process again in the video. This time they turn out the tire without the wheel (they cut it, by the way, with a knife).

Even by itself, such a tire turned inside out looks good. If you paint it, it becomes even better. If desired, they can be combined - different colors, sizes, installed differently: on the bus or on the legs.

A tall flower bed always looks beautiful. Especially with hanging plants. It can also be made from tires, and there are several possibilities. The photo below shows two ways to secure cut tires at different levels. The first is to use stumps for this, to which flowerpots are attached with nails or screws. The second is to use reinforcement - three or four rods on which to put rubber. Having set the tier at the desired level, it needs to be secured; on metal this can only be done with the help of clamps.

It is not always possible to place a flowerpot on the ground: some areas are so developed that even one square meter it is problematic to single out. For this occasion, people came up with various hanging flowerpots, also made from old tires. Only a small part of the whole tire remains, so you have to cut a lot... be patient. For example, you can do hanging planters in the form of a dolphin, parrot, rooster and other strange birds. For some ideas, see the photos.

Tire planter - parrot, rooster and dolphin

All these crafts made from tires. Only a small part of them - the heads - are often made of dense foam. Having cut and sanded the part of the desired shape, it is attached using self-tapping screws coated with glue (this is a secret, remember), and then painted. Watch the video to see how to make a parrot from a tire.

Below are posted step by step photos, which depict the main stages of creating a table or ottoman from a tire. You will need two more circles made of plywood or fiberboard suitable diameter, hemp rope is used for finishing. From available materials you will need glue and a glue gun, as well as varnish and a brush for applying it. To connect the circles to the tire you will also need self-tapping screws - 8-10 pieces on each side.

Next we take glue gun and after heating the glue, apply it to the sidewall. If you don’t have such a luxury on your household, take the glue that’s in the tube bigger size, like " liquid nails" It's easier for them to work with mounting gun. Apply a stripe to the side and glue the hemp rope. So - all the way to the top.

Using the same technology, we decorate the lid of the table (ottoman). You need to start laying from the middle: apply glue, lay the rope.

Finishing the work - applying varnish. We do it slowly, soaking it well. This is what should happen as a result. If you made a table, you can put glass on top - a rope, even coated with varnish, is not the best best coverage for the table, although beautiful...

Variety can be achieved through the cover. It can be sewn from the dense material you like.

Cute ottoman...

You can knit it - large knitting looks interesting.

Large knitted cover - looks interesting

If you don’t want to sew or knit, you can use old knitted items cut into strips. They are cut into long strips 3-5 cm thick, rolled into balls and then wrapped around the ottoman. It turns out interesting, especially if several colors are combined.

If you need a taller ottoman, screw the two tires together with self-tapping screws and continue working with them in this form.

Another option, see the video

Decorating a summer cottage is a creative and exciting task. At the same time, it is not at all necessary to buy expensive sculptures or other ready-made works of art. It is enough to show ingenuity, imagination and perseverance to get beautiful figures from scrap materials. In this article we will look at how to make garden crafts from tires.

Ideas for decorating your garden

Using old tires allows you to decorate the interior of your garden with virtually no investment. The price of the finished product will be negligible, and family budget could be spent, for example, on improving living conditions. So, what can be created from the mentioned material?

Example #1: swan

For all crafts you will need approximately the same list of materials:

And tools:

Instructions for creating a swan:

1. Draw chalk lines along which the tire should be cut. Do it as shown in the photo or find suitable patterns on the Internet.

1. Carefully cut the rubber.

1. Using a grinder, we cut the part that does not yield to the knife.
2. We turn the product inside out, bending the cut edges.

Advice: if the craft is made for the children's part of the garden, then it is necessary to carefully handle the sharp edges of the cut elements, otherwise the child may be injured by them.

1. We paint the swan in the desired colors.

Using various patterns, you can get not only swans, but also a wide variety of other garden crafts from car tires.

Example #2: caterpillar

In this option, you don’t even have to cut anything, but you will need a little more materials:

We proceed as follows:

1. We partially bury the tires in the ground, connecting them with self-tapping screws.
2. We attach a bar bent in the shape of a mustache on top.
3. We screw empty cans to the front.
4. We paint the figure and get a slightly surprised, but quite attractive insect.

Example No. 3: teddy bear

To get a clubfooted beast you will need:

Work progress:

1. We make holes in the large and small tires using a grinder so that they can be connected with a pipe.
2. We close the tire holes with pieces of plywood, which we fix with self-tapping screws.
3. We glue linoleum onto the plywood.
4. We cut out ears and paws from thick rubber, and then fasten them in the right places.
5. We place the resulting figure on two small wheels, which will play the role of original legs.
6. We paint the craft in two layers.

Example #4: giraffe

Not enough exoticism at your dacha? Build a giraffe! For this you will need:

You won't have to work too hard:

1. Bury the tire halfway into the ground.
2. We knock down a log and a block of wood with nails into a semblance of a neck and head.
3. We bury the resulting structure next to the tire.
4. We cut out the ears from plastic and attach them to the head using nails or glue.
5. Glue the eyes from the toy onto the face of the resulting animal.
6. At the back we fix a piece of watering can as a tail.
7. We use paint to give the craft the appearance of a giraffe.

Example #5: crocodile

A toothy predator will also be able to perfectly decorate your area. For this we use:

Some carpentry skills will be required here:

1. We cut out the tire, cutting out the body of the crocodile.
2. We cut out the shapes of the back and abdomen from the boards, fix the slats as spacers as shown in the following photo:

1. We insert the resulting frame inside the back and secure it with screws.
2. From below, we fix the belly of the future crocodile in the same way.

1. We screw plastic teeth into the “mouth”.
2. Glue the scales.
3. We insert table tennis balls into the eye sockets.
4. We paint the craft in a green color.

Practical use of tires

Products made from tires for the garden can, in addition to having a decorative value, also have a practical value.

Here are some options for using them:

1. Vases for flowers. The tire is cut and turned inside out, after which it is filled with soil and plants.

1. Swing . Here you can experiment from the banal hanging of a whole product to cutting fancy shapes. (See also article.)

1. Arrangement sewer wells . Tightness and moisture resistance make tires an excellent cheap material for creating the walls of septic tanks or other similar structures.

1. Children's sandboxes. To do this, just dig the tire and fill it with sand. The costs are minimal, and the child will already have a place to play.

1. Steps. If the terrain on your site has a slope, then it can be equipped with tires, which will greatly simplify overcoming it.

1. Bicycle racks. Bury the tires halfway into the ground next to each other, and you can easily stack your bikes between them.

1. Fencing. With tires you can easily fence off the desired area and divide its zones.

1. Sports and game equipment. This could be an obstacle course or just a product dug into the playground that children will happily climb on.

Conclusion

As you can see, you shouldn’t rush to throw away old car tires. With their help, a summer cottage can be turned into a real amusement park. It could be like decorative crafts in the form of various animals, and completely functional objects.

The main thing is to use your imagination correctly and put some effort into arranging your garden. Below are some solutions to this problem.

The video in this article will provide you with Additional information, which is directly related to the materials presented. Creative thinking and old wheels will allow you to improve your own dacha almost free of charge.

Today people are trying to decorate their yards, summer cottages and gardens with whatever they can. Designers received a lot of ideas that can be safely translated into reality. The use of such improvised materials as used tires has led to the fact that in the gardens and vegetable gardens of the plots there are real masterpieces made by hand.

It is worth noting that garden crafts can decorate any area. It could even be a sandbox in the yard, a flower bed, a swing or garden beds.

For example, to make a flowerbed from a car tire, you don’t need to guess too much. You just take a used tire and fill it with earth. But it won't be a masterpiece. Now, if you take paints, decorate the tire with outside, and even better - put three wheels - one on one - then you will get a real masterpiece.

If you want to do something unusual, you can take tires of different diameters. With the largest one, we start laying out the rubber from the bottom.

You can even fix an impromptu flower bed to a tree. To cover the tire on one side, you can use any material that can support the weight of the earth.

photo: DIY tire parrot

Dreamers even came up with two cups that are made of tires and stand on the site. The main bowl is cut out, and the handles can be made of metal tape.

Another idea is animal figures made from used car tires. They will put your guests in the mood in the garden or garden.

Most popular in garden crafts the figurine is a swan. To make a bird, you will need a tire that does not have a metal cord.

This will make it easier to cut the rubber. We are marking our future crafts. We cut the tire with a very sharp knife or hacksaw. To strengthen the swan's neck, use metal rods. At the end we paint the bird.

From old car tires you can make a turtle, a zebra and even a horse. To make a beast, you need to dig a beam into the ground along with a tire. In order for the animal to look like itself, it is necessary to apply certain colors with paint.

On summer cottage Furniture made from car tires will look great. You can even create comfortable options using various soft linings. Everything that can be useful in this craft is used. If you like to relax in the garden in the evenings, then several personal chairs that can be placed close to each other are best suited.

There can be no difficulty in making crafts. We fantasize, and nothing will go wrong with you more than an hour. There is no need to take thick and rough tires, the reinforcing fiber of which can cause wounds.

Each of us remembers a swing made of car tires in the garden from childhood. Pastime then was not complete without a swing. And now you can make crafts with your own hands from old tires. It is worth noting that a swing made of tires will be safer for a child than one made of wood or metal. So, what do you need to make a tire swing? First, we find a branch that is strong and slopes toward the ground. Secondly, we collect the following tools: a knife, a hacksaw, rope or chains and the tires themselves.

We make a loop at the end of the rope. You need to make sure that the knot is strong. We place the tire vertically. The rope is passed through the wheel and tied firmly above the ground at a height of a meter.

DIY flower beds in the garden

Real fun for children are tracks and various paths that can be made from tires various sizes. You can make a regular path on the site out of tires. To do this, you will need large tires - for example, from a truck. It is only necessary to cut off the part with the tread, and then spread the strips on the area, additionally securing it to the ground.

Photo: borders for vegetable beds and flower beds in the garden

Photo: multi-level strawberry beds DIY paths in the garden

DIY crafts - flower beds

Useful tips

Made from plastic bottles, stones, old tires and other seemingly unnecessary items can be made a huge number of things.

DIY crafts can be used for home or garden decorations, and also to give as a gift to a loved one.

Kids will love it too participate in the making of colorful and original crafts, especially if they are crafts for themselves.

Children's crafts from plastic bottles

Whether it's summer or winter, cute toy animals will always delight children.

In this master class you can learn how to make penguin crafts using plastic bottles.

You will need:

Clean plastic bottles (any size)

Acrylic paints

Scissors.

Below is a diagram to follow to make penguins:

Kindergarten DIY crafts. Living stones.

This can be a very creative and useful decoration for any garden or vegetable garden. You just need to find a few simple stones and, with the help of paint and imagination, get started.

It will be easier if you use smooth stones. But at the end of the day, it all depends on the design and pattern you are going to apply.

Here are a few simple examples- animals, bugs, fish.

Children will not only find it interesting to color, but also to play with such pebbles in the garden.

In addition, such painted stones can be used to decorate the interior and exterior.

You will need:

Pebble

Acrylic paints

Clear varnish

Simple pencil

1. Prepare the stone, wash it and let it dry.

2. Using a pencil, draw the desired design on the stone.

3. Start coloring with gouache.

* It’s good if the color of the stone matches your drawing. Drawings with a black outline turn out very well.

* When the paint dries, you need to coat the stone with colorless varnish, thereby the paint will not be erased.

You can make something more complicated, for example a snake and a turtle.

Even more difficult option this is a picture of a rabbit.

Children's paper crafts. A whole paper platform.

This kind of craft is very easy to make.

You will need:

Colored paper

Scissors

Glue (glue stick)

You need to cut out strips, squares, etc. from colored paper. and make swings, slides, ladders, tables, paths and much more.

Everything is limited by your imagination - create what you want and build the site you dream about.

Crafts for the playground. Giraffe made from a tire and a log.

A very cute giraffe can be made for a playground or kindergarten.

You will need:

Old tire

2 logs (short and long)

Plastic bottle.

Eyes from an old toy

Watering can (for tail)

1. Bury the tire halfway.

2. Make a muzzle from a short log and connect it in the shape of the letter L with a long log using nails. The body of the giraffe in the image is about 1 meter long, and the head is 25-30 cm.

3. Dig in a long log next to the tire (see picture).

4. Prepare a plastic bottle and use it to make ears for the giraffe. Next, attach these ears with glue or nails to the muzzle.

5. Animal eyes can be made from plastic bottle caps. Glue eyes from an old toy onto each lid (or you can draw them with a marker).

6. You will need the spout of a watering can to make a giraffe's tail.

7. All that remains is to paint the craft so that it looks like a giraffe.

Crafts for kindergarten. Zebra made of tires and logs.

Just like a giraffe, you can make a zebra, and the African savannah will be filled with another animal.

You will need:

1 tire

2 logs

Eyes from an old toy

Plastic bottle

1. First dig the tire in halfway.

2. Make a muzzle and neck from logs. The body of the craft in the image is about 70 cm long, and the head is 25-30 cm.

3. Dig in a log next to the tire.

4. Make ears from a plastic bottle and attach them to the face.

5. You can make eyes from plastic bottle caps or use parts from an old toy.

6. Make a tail from the spout of the watering can, and insert a brush made from an old tire inside.

7. The nose can be made using thick rubber.

8. All that remains is to color the craft.

Children's craft from a plastic bottle

Using plastic bottles you can make many beautiful and sometimes even useful crafts.

Take, for example, this outlet for every little thing. It’s not difficult to make, but it will be useful for a little fashionista who can store jewelry, brushes and pencils in it.

This craft can also be used as a flower vase.

1. Prepare a bottle and use stationery knife cut off the top part.

2. Using scissors, cut thin strips of the same width on the bottle (to the middle).

3. Now the strips need to be folded. Do this so that they are perpendicular to the bottle.

5. All that remains is to design the outlet.

Children's crafts from bottles

So many interesting crafts for home, garden and vegetable garden can be found in our articles.