How to assemble plasterboard niches: simple instructions, plus a photo report. Niches in plasterboard walls: design options and DIY creation Making a niche in a plasterboard wall

If you know how to make a niche out of plasterboard with your own hands, you can create one in any room of your apartment. original design at a favorable price.

Since working with drywall is not difficult, and it is inexpensive, this material is optimal for finishing work.

There are many options for finishing plasterboard, and niches are one of the most popular.

Particularly parts can be found niche for brick wall, which is the most difficult to work with.

Niches are not only attractive, but also quite practical - you can build in them, for example, shelves in a toilet for storing hygiene items, or place a cabinet or other furniture there, depending on the size of the structure.

The manufacturing process is also not too complicated, so you can easily do it yourself.

In the article you will receive instructions on how to make a niche from plasterboard, and you will be able to bring it to life in your apartment.

The process of working with drywall itself does not pose any particular problems, but you need to be more careful in the preparation, and then you will not have the question: how to make a niche in the wall?

First of all, you need to decide on the design and structure of the niche, as well as its purpose.

Decorative niches can often be found in the living room or bedroom - in such rooms you can install shelves, or simply paint the structure.

More functional shelves can be found in the bathroom or toilet - cleaning products and hygiene items can be placed there.

Sometimes niches in the wall are made for a dressing room or wardrobe - such a design should be of a more impressive size, and it is best to make it in the corridor or on the balcony in order to save as much living space as possible.

There are also devices for windows, and decorative niches for curtains, which also act as an original decorative element.

Once you have decided on the size and shape, you need to make a frame for the niche.

Whatever type you choose: a niche for a wardrobe, functional shelves in the toilet, a box for curtains or just a decorative element, a frame will be necessary.

A properly made frame will ensure the structure is stable, reliable and attractive. appearance.

To make it, you will need guide profiles, which are needed to secure the structure to the walls and give the product the necessary contour, and profiles that give rigidity to the structure, as well as the drywall itself.

To create the structure, sheets measuring 12.5 mm are suitable. You can buy both regular and moisture-resistant material.

On a brick or other wall to which the structure will adjoin, it is better to draw the contours of the future niche to make it more convenient to work.

Draw all parts of the structure: shelves, if provided, additional elements under a wardrobe, etc. It’s better not to be lazy and do everything carefully, then installing the structure yourself will be easier.

You need to align the guide profiles along the contours and secure them with dowels.

Where the sections are straight, the work is simple; it will be more difficult if you are making a curved frame - then you will have to smoothly bend the metal profiles with an arc.

This can be done by cutting the material in increments of 50 mm, or by purchasing finished design the desired shape if you don't want to work on it with your hands.

After installing the profiles, you need to make the frame voluminous in accordance with the size you chose for the depth of the niche.

Guide profiles must be fixed to the ceiling and floor so that their ends are positioned strictly vertically.

In addition to the volume, at the same time you need to make the front plane of the niche, which needs to be completely flat.

The corners are made from twisted guide profiles. The shelves should be located at 90 degree angles to each other.

Corner elements must stand vertically and be connected to the upper and lower profile and located on the ceiling and floor.

You need to check how correctly they are installed in two areas: on the front and side surfaces.

After this, the profiles need to be fastened to each other and to the corner post using self-tapping screws.

Installation of shelves, cladding, design

After you have made the frame voluminous and rigid, you need to make shelves.

The technology for making shelves in a wardrobe and a decorative niche is the same and takes place in several steps: the first step is to set the plane of the shelf using a level and self-tapping screws.

After correct location you need to strengthen the shelf with the help of load-bearing profiles (this is especially true if you are making a wardrobe, where the load on the shelves will be slightly higher).

We cover the frame with plasterboard at the same time as its manufacture - it is more convenient and faster to work with your own hands in this way.

Before starting installation, all inner part niches need to be sheathed with plasterboard - it is easiest to do this with one continuous sheet than to sheathe cut materials, keep this in mind.

In addition, a structure covered with solid plasterboard will be more rigid.

The fewer joints in your frame, the easier it will be to cover it with plasterboard - this applies to all products made from this material: decorative niches, devices for wardrobes, boxes for curtains on the ceiling, etc.

A decorative niche, shelves in the toilet or even a wardrobe can be made with lighting - for this you need to carry out all the necessary communications at the stage of installing the frame.

If you want to make sound insulation, then you need to put mineral wool into the voids of the frame.

The location of the lamps may differ, depending on the type of structure: decorative niches are most often sheathed around the perimeter, shelf lighting can be installed in the wardrobe, and the curtain box can be trimmed with lamps on top.

You can reflect the lighting system in advance in the diagram, so that later it will be easier to install it yourself.

Sound insulation is an optional step, but if it is not done, then you need to be prepared for the fact that at the slightest contact with objects, the drywall will emit a hum - this is not too noticeable if it is decorative or for curtains.

However, if you are doing it, for example, under shelves in a toilet or a wardrobe, then sound insulation is still desirable.

Covering the frame of a niche with plasterboard occurs in several stages: first you need to join the individual parts of the plasterboard.

Where the parts of the material are connected, you need to make additional stiffening ribs, onto which you then screw a separate piece of drywall.

If this is not done, then over time the material will crack, even if the seams are properly sealed. Lack of jointing also leads to cracks.

To avoid them, where the sheets of drywall are connected, you need to chamfer. After this, you need to install self-tapping screws measuring 150-200 mm.

The last stage is decoration and finishing. In order for the paint or other coating that you have chosen to finish the niche to adhere well, the surface must initially be treated with putty.

You can refuse it only if you are going to veneer the plasterboard with stone or tiles. Often, puttying the surface is a more labor-intensive step than assembling, installing and covering the frame.

It is necessary to carefully process the corners and joints, and also to seal even the smallest irregularities in the drywall with putty.

Drywall can be finished with almost any material. The most common option is to simply paint the surface in the color you want.

Niches for curtains can be made contrasting, and shelves in the toilet, on the contrary, can be made to match the color of the finish. A sliding wardrobe is most often painted to resemble wood, and the inside can be covered with wallpaper to match the color of the room.

Often, plasterboard niches are installed around a brick wall - it can be in the hallway or bedroom.

In this case, the wall can be left as is, especially if the room is decorated in a loft style or similar, and the niche can be painted to match the color of the wall, or painted with patterns.

Working with drywall is easy not only in creating niches, but also in finishing the material, so doing the decoration yourself should not be difficult.

With the help of plasterboard you can give the apartment unique design, creating in different rooms niches for curtains, under windows, wardrobes, shelves in the toilet or hallway, decorative niches for TV and other equipment, etc.

There are a lot of possibilities for working with drywall, and its simplicity makes it ideal material to create designs with your own hands.

Today's renovation is almost impossible without the use of drywall as the main finishing material. With its help, you can achieve the ideal surface of walls and ceilings, as well as create a variety of structures: partitions, niches, shelves and arches.

This material has a number of advantages:

environmental friendliness;
availability;
ease of fastening;
light finishing;
available various options sheets differing in basic characteristics.

In addition, making a plasterboard niche with your own hands is very simple. It is enough to know the basics of technology for working with drywall and your home will be transformed beyond recognition.

Niches made of plasterboard can have a wide variety of designs. Among all possible options The most common types are:

open type of construction. Open niches from drywall most often installed in the living room to display souvenirs, collections of small items, etc. With their help, you can create a unique ambience for the room;

closed type of construction. The most functional and used for storing clothes, books and other things. They are mainly made in the hallway or bedroom, where it is necessary to hide household items from prying eyes;

with backlight. Such a niche made of plasterboard will help add additional lighting to the room, and will also allow you to highlight and focus the attention of guests on it in an original way. Looks great if interior decoration combined with the use of mirrors;

without backlight. Has the lightest design. A partition with such niches will fit perfectly into any apartment interior.

Niches also differ in functionality:

decorative It is part of the interior of the room and does not carry any special practical load. Such plasterboard niches in the living room will look best;
for storing various things. The most practical. Such plasterboard niches in the wall will help rid the room of bulky cabinets and wall shelves. Moreover, they will fit very organically into small rooms;

zonal. Such a partition with a niche will help not only visually, but also actually divide the room into several functional zones. For example, in the dining room, kitchen and relaxation area.

Today, the use of plasterboard structures instead of some furniture elements is very relevant. Thus, niches made of plasterboard can be used instead of hanging shelves to place a TV in the wall, creating decorative fireplace or dressing room, etc.
All of the above options can be easily done with your own hands. Therefore, the choice of design depends solely on your wishes and capabilities.

Creating a design diagram

If you want to construct plasterboard niches with your own hands, you will definitely need to develop a drawing of the future structure.
The scheme is developed according to the following algorithm:

decide on the appearance;
choose its position inside the room;
draw on the diagram the parameters of the wall on which installation will subsequently be carried out;
We plot the dimensions of the niche itself on the drawing. Be sure to calculate it deepening;

Note! The depth of the structure directly depends on its purpose. If a TV is to be installed in it, then the recess should be sufficient to mount and connect it. In such a situation, the recess should be at least 30 cm. If the structure has a purely decorative function, then 10-15 cm is enough.

if you plan to make a partition, then we plot the parameters of the room on a drawing to scale in order to correctly assess the dimensions of the structure in relation to the entire room.

The drawing will help you correctly assess the scale of work and buy required amount materials.

Tools and materials you will need

Drywall niches can be easily made only if you have the following set of tools:

Necessary tools

perforator and drill;
building level, tape measure and pencil;
spatula and sandpaper;
special fasteners, dowels and screws.

In addition, you should purchase the following materials:

plasterboard sheets;
guides and rack profiles;
serpyanka, putty and primer.

Today the best manufacturer drywall and all finishing materials for him the German company Knauf is considered.

Preparing for work

The list of preparatory operations that must be carried out before installing the niche frame in a plasterboard wall includes:

remove all irregularities from the working surface;
treat the wall with a primer;
apply markings to the wall using a previously created drawing.

Note! We apply markings based on the level. Otherwise, the niche structure may turn out crooked and uneven.

Frame installation

Many people ask the question “how to make a niche in the wall”? To do this, you first need to create metal carcass.
The manufacture of the frame is carried out as follows:

We apply a guide profile to the drawn lines and drill a hole in the wall and in the profile with a hammer drill;
fasten the profile with self-tapping screws;
in a similar way we form the entire perimeter of the structure;
then mounts the rack profiles to the finished frame. We also attach them using self-tapping screws. The length of the rack profiles corresponds to the depth of the niche itself;
We attach guides to the removed rack profiles using self-tapping screws.

Ready frame

If a partition with niches is needed, then we construct the frame as follows:

First, we install the base from guides on the floor and ceiling;
then we connect them with vertical guides;
where necessary, according to the diagram, we attach rack profiles and additional fasteners. The partition structure is ready.

If it is necessary to install additional lighting, after installing the frame we install the necessary wires.
Now the frame structure is ready for further finishing work.

Drywall installation

So, the frame of the plasterboard niche is ready and now it remains to finish it with finishing from plasterboard sheets.
Fastening drywall to a metal frame is carried out as follows:

cut the sheets of drywall into the required pieces;
we apply them to the frame and fasten them with self-tapping screws;
comes first finishing the outer part, and then the inner.

Covering the frame with plasterboard

If a plasterboard niche has additional lighting, then you must first make holes in the plasterboard for spotlights. In this case, installation will proceed as follows:

We insert lamps into the prepared places;
we connect them to the wiring that was carried out at the stage of assembling the frame;
We attach the drywall with lamps to the structure using self-tapping screws.

Now the niche device is ready for final finishing work.

Note! The screw heads should not protrude above the surface of the plasterboard sheets or be strongly recessed into them. Otherwise, the final finish will not be of very high quality and neat.

Carrying out final finishing

Final finishing is necessary in order to give it a finished and aesthetic appearance. The niche and the interior of the room should be decorated in the same style and complement each other.
Final finishing involves:

sealing all joints with serpyanka;
coating the niche with a rough layer of putty;
rubbing the rough putty until smooth;
treating the surface of the structure with a deep penetration primer;
applying the final putty after the primer has dried. If there are any rough spots, sand them down with sandpaper.

Almost finished design

Now all that remains is to create a niche for the design idea of the room. To do this, you can paint it, wallpaper it, cover it with artificial stone or do decorative stucco from plaster.
It is quite easy to construct a niche from plasterboard. The main requirement is to follow all the recommendations and not skip a single step. As a result, your creation will become a worthy addition to the interior of the room.

Niches made of plasterboard have become an integral part of the interior. They are used as a shelf, a TV stand or a stereo system. They can perform decorative functions and divide the room into zones. They help to use space rationally if they are used to place furnishings. To make them, you will need a minimum of tools, several sheets of drywall, material for the frame and sheathing. With the right color scheme, taking into account the design style, the niche will harmoniously fit into overall design and will become the highlight of the atmosphere.

Types of plasterboard niches - functional purpose

IN modern interiors niches in the wall are often used. They differ in shape, size, functional purpose. The material for them is plasterboard. Thanks to its lightness and ease of processing, you can embody original design ideas.

The niche can be used:

for installation household appliances and equipment;
for dividing a room into zones;
as a shelf for books;
as a design element;
as built-in furniture.

They can be built in any room where they will perform their intended functions. Often installed in living rooms, halls, bedrooms. They install a TV or stereo systems, and use them as shelves for books and various small items. With the help of structures, they divide the room into zones. They look original if illuminated with LED strip, spotlights or candles.

In the bathroom, a niche made of plasterboard serves as furniture for storing hygiene products and bath accessories; in the bedroom, it is used to make a wardrobe. In the kitchen, you can store household appliances and other equipment in it. This will make the room more attractive.

With the help of recesses you can visually change the space. The horizontal arrangement of the niches makes the wall wide, the vertical arrangement adds height. Hidden curtain rod in plasterboard box on the ceiling and illuminated by LEDs will make the room unique. Designs attach various shapes, sizes, select the color of the finish to suit color scheme premises.

Preparatory work

Having decided on the functional purpose of the niche, they begin to select a location and create drawings. Measurements are taken taking into account the volume and installation of the frame: width, height, depth, distance from the corner and floor level. To reduce waste, the design should take into account the size of the sheets that will be purchased.

The drawing shows the position of the niche on the wall and all dimensions are indicated. It would be useful to make an additional plan, indicating the equipment to be installed, taking into account its dimensions. The compartments must be larger than the equipment being inserted to provide adequate ventilation and wiring. The distance to the back wall is at least 10 cm.

If the shelf is intended to be divided into zones, you need to draw the layout of the room and indicate its location relative to the rest of the furniture, walls and corners. Based on the measurements, the required amount of material is calculated.

Selection of materials

At each stage of creating a niche, certain resources and tools will be required. To apply markings, you need to prepare a ruler, marker or pencil, tape measure, and building level. The frame structure can be made of wood or metal profiles.

From a practical point of view, it is better not to use wood. Over time, it dries out, absorbs moisture, and is negatively affected by temperature changes. Such a frame will fail, since drywall is a fragile material, a niche made from it will not last long.

The metal profile structure will be strong and durable. It is better to use aluminum, it is lighter in weight, easier to process and cheaper in price. You need to purchase guides, supporting profiles, and hangers. To attach them you will need a drill, screws and dowels. For cutting, you should prepare metal scissors.

The sheathing is done with moisture-resistant plasterboard sheets. The thickness depends on the purpose of the shelves and future load. If heavy objects will not be placed on them, then it is enough to take an arched gypsum board. It is thinner than ceiling and wall ones, and accordingly its cost is lower.

To work with drywall, you will need special glue, a sharp knife (you can use a stationery knife), a spatula, a serpyanka, starting and finishing putties, a roller, and paint.

Installation of a plasterboard niche - step-by-step instructions

Work begins with surface preparation. It does not require careful leveling; everything will be covered by the structure. Unevenness should be assessed for secure fastening. They apply the profile to the wall and see how tightly it fits to it. If necessary, you will have to perform at least minor alignment to prevent the frame from skewing.

The work depends on the size and shape of the defects. It’s easy to knock down the bulges with a hammer and chisel, and cover the area with mortar. Sometimes it is more convenient to align profiles during installation by installing wedges, shims and other devices.

Next, you need to carry out the wiring if you plan to connect electrical network. The main part of the cables is passed under the baseboards, the rest is hidden under the box. All of them are closed into corrugated hoses, which are fixed to the base using special clips.

The next stage is applying markings. A drawing with actual dimensions is transferred to the prepared wall surface. The marking grid is applied using building level and a suspension so that the structure is level horizontally and vertically. A niche is installed along the drawn lines.

Metal profile assembly

There are two options for making the frame:

if the future building small sizes, then it is easier to first assemble the structure and then fix it on the wall;
with impressive dimensions, installation is carried out directly on the wall.

Manufacturing process frame structure do it yourself with the following step-by-step instructions:

1. First of all, the guides are attached; they form the basis of the future structure. Correct installation is controlled using a building level.
2. Based on the markings, a load-bearing profile is attached to the wall, forming the back part of the frame. Check the corners to ensure they are strictly straight.
3. Next, the gypsum board strips are cut out and attached to the assembled frame. They limit the internal plane of the niche.
4. On next stage install vertical posts and horizontal guides. Work begins from the center of the structure, moving to the edges. Vertical strapping is performed after fastening horizontal stripes, this makes the frame stronger and more reliable.
5. Fix the guides on the floor and, if necessary, on the ceiling.
6. At the next stage, the outer frame is assembled, similar to the inner one, using rack profiles.
7. Horizontal jumpers are installed between the back and front sheathing to strengthen the structure. The appearance of the niche, the depth of the shelves and the ability to withstand the weight of the installed equipment depend on the correctness of their fastening.
8. Having completed the fastening work, check the structure for tearing. If it is securely fixed, proceed to the stage of finishing with plasterboard sheets.

To create a frame for the shelves, first a frame is made from profiles required sizes. Then it is attached to the wall. If the shelves are too long, jumpers are used for fastening, which are installed in increments of 40 cm. Having attached the frame to the floor and ceiling, sliding wardrobes are installed. For curved structures, take a flexible profile or make cuts on the sides of a regular one. Some planks are equipped with special locks, which makes it easier to assemble the frame.

GKL cladding technology

Before starting work, you need to cut out the parts in advance according to the dimensions in the drawing. While cutting, you should protect yourself from harmful drywall dust by wearing goggles and a mask.

The sheets are easy to cut. To do this first construction knife cut the cardboard down to the gypsum layer, then bend the canvas and make a cut on the other side. Can be used electric jigsaw. Technological holes are cut out on the blanks for connecting wires, installing sockets and switches.

When the parts are cut out, each one needs to be placed at the installation site so that, if necessary, it can be adjusted to size. Next, large strips of drywall are screwed with self-tapping screws to the frame in increments of 25 cm, making sure that the caps are recessed and do not stick out above the surface. You should not immerse them too much in the sheet, as it may burst. When sheathing a niche, make the distance between the fasteners 15 cm. 2 cm retreat from the edge. The edge must be on the profile, otherwise it can be damaged.

Sometimes strict geometric shapes do not always fit harmoniously into the interior. It is necessary to create niches in the form of arches, semi-ovals, ovals and other figured configurations. The top of the plasterboard structure is made curved, the bottom is left flat to carry out functional loads.

For the manufacture of curly forms designer plasterboard with a thickness of 6-6.5 cm is used. It is reinforced inside metal mesh, which allows you to bend the material with a small radius. If it is necessary to bend a regular gypsum board, the sheets are cut and, after fixing, puttied. Another option is to bend them into a semicircle using moisture. To do this, first a needle roller is passed over the surface of the part, then it is sprayed with water and left to dry in a special mold. After 12 hours, the plasterboard will take the desired configuration.

Beautification - puttying, seam sealing and finishing

First, the places where the sheets are attached are puttied. The surface is leveled so that it is not visible where the screws are screwed in. Since the cutting was done by hand, the edges are uneven, so the boundaries of the joints are cut at an angle of 25 degrees, making a chamfer.

If cuts are not made at the joints of the sheets, after applying the putty, a bump will form, which will subsequently be difficult to level.

The seams resulting from joining the sheets are filled with putty solution and leveled. Then a sickle tape is glued onto the glue or putty, pressed well, the surface becomes perfectly flat. The corners in the niche are processed with a plane, making a chamfer of 45 degrees. After this it is sanded using a rasp. Finally, the entire surface is rubbed with an abrasive mesh and applied finishing putty. When it dries, carry out last sanding.

Niche design options

After puttying, a layer of primer is applied to increase adhesion and ensure strong adhesion of the finish to the drywall. To decorate and give a niche individuality, use various materials: paint, wallpaper, mirrors, fabric.

Should be selected bright hues, dark ones visually reduce the size of the room. The plasterboard structure is made either of the same shade as the wall, or a little darker. Inserted mirrors increase the space.

Exist different variants decoration:

Spot lighting. Lamps are mounted at the top or bottom.
LED backlight. Are used LED strips. If you combine them with an audio system, you get something like light music.
The back part is finished with photo wallpaper, decorative stone, fabric, paint.

7087 0 0

How to assemble plasterboard niches: simple instructions, plus photo report

A very popular solution is a niche at the head of the bed.

Greetings, readers of my blog. Today you will learn how to make niches from plasterboard in the living room for a TV and other equipment. However, those structures, the assembly of which I will discuss later, can be installed with equal success both in the living room and in the bedroom, in the kitchen for the refrigerator and in other rooms where this is necessary.

A distinctive characteristic of the designs that I will discuss below is their simplicity and short assembly time. This means that you are guaranteed to cope with this.

A few words about niches and their assembly

Making a niche in the wall with your own hands using traditional building materials, such as brick, is very difficult, and the project will take a lot of time to complete. The situation is completely different if, as building material use gypsum board. After all, a gypsum board, reinforced with two layers of cardboard, is simply cut and is also easily attached to the supporting frame with self-tapping screws.

There are several varieties on sale plasterboard sheet. Some varieties are moisture resistant, others are ordinary and their price is more affordable. Drywall also differs in standard sizes, and above all, in sheet thickness.

What to choose from this variety so that the plasterboard niche is durable and looks good?

It all depends on the purpose for which the quick-assembled structure is being assembled. For example, a niche for curtains or a similar structure that will be used exclusively as a decorative element, can be assembled from thin gypsum board 6.5 mm thick. This material is widely used for cladding walls and ceilings, and therefore is not designed for significant mechanical loads.

If you are building a niche in the bathroom or a TV stand built into the wall, I recommend using a sheet with a thickness of 9 mm or more. Such dimensions provide the skin with high resistance to mechanical loads, which is important if plasterboard construction assembled under a large diagonal TV.

If plasterboard niches are assembled in rooms with excess humidity, it is advisable not to use regular drywall, but a gypsum fiber sheet that does not have surface paper reinforcement and is more resistant to moisture.

For assembly load-bearing frame Two types of materials can be used:

Wooden slats and bars are an excellent solution if for some reason you are afraid or do not know how to work with assembly metal structures;
Galvanized metal profile - allows you to quickly assemble lightweight metal structures of any complexity, the price of which will be slightly lower than the cost of wooden analogues.

Having compared the characteristics of the listed materials, to assemble the niche we will use a metal profile and gypsum board with a thickness of 6.5 mm, taking into account the fact that we will be assembling a decorative niche.

Installation of plasterboard construction

Now we’ll learn how to make a niche out of plasterboard with your own hands. The assembly instructions are as follows:

We measure mounting surface, in this case a wall, and, in accordance with the measurements and our preferences, we make a drawing;

Using putty, we completely level the wall, since after installation is complete, it will be very difficult to level the niche openings;

We grind the surface leveled with putty and coat it with a primer to prevent dusting;

By using laser level(if this is not the case, we use a spirit level and a plumb line), in accordance with the prepared drawing, we apply markings on the mounting surface along which the profile will be attached to the wall;

Using tinted laces, we connect the marking points into the perimeter along which the installation will be carried out;
In accordance with the markings, the required number of profiles of suitable length;
In the profile, according to the diameter of the prepared screws, we drill through holes at a distance of 20 cm from each other;
We apply the profile pieces prepared in this way to the wall according to the markings made;

Inserting a pencil into the holes, transfer the location of the holes to the mounting surface;
Using the marks made, we drill holes to the depth and width of the dowel;

We attach the perimeter of the sheathing to the mounting surface;
Using cutting pliers, we install vertical posts that will be pushed forward relative to the wall;
We strengthen all connections made with cutting pliers with self-tapping screws;
We cut strips of drywall in width equal to the distance over which front part the niches will protrude forward from the wall;

We fasten the prepared strips perpendicular to the wall along the perimeter of the niche;
From the underside of the fixed strips of drywall, at a distance of no more than 50 cm from each other, we attach reinforcing jumpers that will make the end part of the structure more rigid;

We also strengthen the sides of the frame with jumpers installed perpendicular to the wall;

We cut and fasten the longitudinal jumpers;

I recommend that before you start covering the frame with plasterboard, you take several photos of the assembled metal structures. As a result, it will be easier for you to navigate the location of the profiles to which the gypsum board will be attached.

We cut the vertical stand and jumpers 20 cm long;

From these blanks we assemble the front side of the niche frame, as shown in the photo;

Similarly, we assemble the frame of the front part along the entire perimeter of the opening;

We assemble the frame on which the LED strip will be attached;

We completely cover the transverse opening of the side console with plasterboard;
We completely cover the side console with a solid sheet;

Then, using a hacksaw according to the markings made, we cut out a rectangle and open the opening;

We sheathe the front edge of the frame on which the lighting will be mounted;

We sheathe the lower part of the frame, which remained open;

After the entire structure is assembled, we check that the seams between the pieces of drywall are cut at an angle of 45°, and also make sure that the heads of the screws do not protrude above the surface;
Prepare the putty mixture;

We glue the technological gaps with serpyanka and align the seams;
We completely plaster surfaces covered with plasterboard;

After the putty has completely dried, sand the surface and prime it for subsequent painting.

So, I told you how to make a niche in the opening of which you can install a large mirror or push in a sofa, wardrobe or other. I offered a photo report on the work done so that you can have general idea about how to work with drywall and metal profiles. Now that you know how to work, I suggest you familiarize yourself with examples of niches in the interior.

Examples of niches in the interior

I'll start with something unfinished, but very interesting project. The design you can see on next photo, certainly suitable for small spaces.

The niche can accommodate a lot of modern household appliances, such as a thin TV, a small stereo system, etc. The only obvious drawback of this design is that it is very difficult to assemble due to large quantity small details.

The next photo shows a similar design, but with smaller dimensions and with built-in lighting. This technique is perfect for a bedroom or living room.

In this case, the niche is designed not as a functional, but as a decorative element on which lighting fixtures, photo frames and various trinkets can be placed. That is, a niche is, in fact, a large beautiful lamp in the interior.

This niche attracts decorative design made using wallpaper. Interesting layout scheme lighting fixtures. But, unlike the first example, this design is not functional, but serves decorative element interior

At the end of the review, I suggest you familiarize yourself with an example of a functional, well-made design, combined with a tastelessly implemented illumination color scheme. If you don’t pay attention to the eye-catching lighting, you can assume that such a niche will be an excellent addition to a children’s room or living room.

In this master class you will find detailed description device process kitchen walls and ventilation according to the finished design project. We will talk about the features of installing a false wall with a niche using the “from the center” method and provide detailed photographs of this work performed by experienced specialists.

A plasterboard niche is a popular and effective interior element. She may have different shapes, but invariably emphasizes the taste of the owner of the house. We will tell and show you how to make it yourself.

If you don't have it ready professional project, create a drawing or sketch with dimensions. This way your thoughts and desires will take shape.

Please note that the parameters of the niche in this case are determined by the size of the tiles with which the inside will be lined.

After transferring the marks to the plane of the wall, we begin to secure the guides. This is a key point, since further dimensions will be based on them.

We create the main frame from the UD profile and check its corners - they must be strictly straight. You can use a tile to check.

Then we cut out and wind the gypsum board strips that will limit the inner plane of the niche.

We install horizontal guides, which we connect to the vertical posts. In this case, the frame is not built from common plane, but from the center of the element (niche).

Check again how the tile fits in. If there is an error, it is better to eliminate it at this stage.

Attention! When trying on tiles, take into account the putty thickness of 2-3 mm.

Pay attention to the vertical piping of the frame and guides. They are installed after the horizontal stripes.

Thus, fastening and tying the entire structure is much more reliable than if the entire frame was made separately.

We mark horizontal guides under the vertical ribs (step 600 mm).

We install the ribs themselves along the lower guide, first on the internal fasteners, and then we place U-shaped hangers under them.

View of the finished frame without the top row vertical racks(done in the same way as the bottom one):

We cover the frame with plasterboard using standard technology.

Pay attention to how the corners in the openings and niches are cut ( convenient way). First, we wrap the entire sheet.

Then we cut it horizontally with a hacksaw.

And use a knife to cut it vertically. This method does not require marking and protects against errors during marking - the gypsum board is cut in place, and one of the planes of the niche serves as a guide.

Final view after installing drywall:

All that remains is to prepare the surface for puttying. We open the corners with a plaster float and the joints with a knife.

Carefully checking the accuracy of the horizontals and verticals, we sew the perforated corner with a stapler.

The final view of the plasterboard niche:

If in your case there is a need to use a wall to hang something, be sure to install reinforcements - double ribs. At the same time, U-shaped suspensions should be of a different class - more powerful. In the future, the niche can be given any volumetric view using various methods finishing and decorations - tiles, wallpaper, curtains, artificial stone.