Which tile cutter is best for porcelain stoneware? Tile cutters for porcelain stoneware

Tile is one of the most common finishing materials today. For her correct installation A number of tools are used, one of which is a tile cutter, without which laying tiles is simply impossible. This article will discuss the main characteristics that it has manual tile cutter: price, design differences, as well as rules for handling the tool.

Manual tile cutters are used not only for cutting tiles, but also for working with other materials (for example, glass or stone). The choice of one or another type of such device primarily depends on the purpose.

Nuances of preparation various types surfaces. How to grout seams on tiles. Criteria for choosing a tiled floor covering.

Electric tile cutters for porcelain stoneware operate on the “wet” cutting principle. In turn, “dry” cutting is not suitable for working with this wear-resistant material. Of course, you can also use mechanical hand tools, but this is accompanied by some difficulties. For example, such models cannot cut a piece of this material if its width is less than 3 cm. Because of this edge tile material will have to be processed by grinding.

There are other manual problems that arise when working with porcelain stoneware:

the problem of a fault clearly along the cut line;
inability to make diagonal cuts;
inability to use when crossing obstacles.

Porcelain tiles are cut using the “wet” method

Electric models do a much better job when working with porcelain stoneware. They not only eliminate dust in the room, but also contribute to more accurate cuts of this material.

Manual tile cutter: price and review of popular models

Today, there are several of the most popular devices that are distinguished by high performance, convenience and reliability. Among them there are both manual mechanical and manual electronic models.

The best manual tile cutters that operate using mechanics:

STAYER 3310-48;
BISON EXPERT 33195-60;
RUBI STAR-60-N.

The most popular manual models operating from electrical energy, include:

STANLEY STSP125-B9;
STURM TC-9811.

Note! Mechanical hand devices are perfect for working with tiles under normal conditions (when renovating an apartment). Electronic ones, in turn, are less common and are even rarely used by experienced specialists. However, in some situations their use is the only possible option.

Each brand of tile cutter has its own advantages and disadvantages. Therefore, to select the required product, it is recommended to carefully study the characteristics of each tile cutting device. The prices of manual professional tile cutters are quite high, but such devices are much more reliable and have long term operation.

Features of the STAYER manual tile cutter

STAYER 3310-48 manual tile cutter is manufactured by a German company in China. The peculiarity of this model is that it is excellent for performing figured cutting. The size of such a device is 42 cm, which limits its capabilities. However, tile cutters of this brand are characterized by the best functionality and low cost. The cutting depth of the STAYER device is 16 mm, which is more than enough for ordinary finishing work.

This model has additional element, allowing you to perform round holes in the tile - “ballerina”. The diameter of the holes varies from 30 to 80 mm. STAYER 3310-48 is also equipped with guide elements that are necessary for performing diagonal cuts.

There are often devices on sale from this company that do not meet the declared quality. Therefore, when purchasing the STAYER 3310-48 model, you need to pay attention not to purchase a defective device.

The advantage of purchasing this model is obvious if you find out how much the STAYER 3310-48 tile cutter costs. The average price of such devices is approximately 1,750 rubles, which is very profitable from a financial point of view.

Mechanical manual tile cutter BISON EXPERT

Tile cutters of this domestic manufacturer They are highly popular because they offer the best value for money. In comparison with more famous brands that produce these products, the BISON EXPERT 33195-60 device is much cheaper.

BISON EXPERT has a length of 60 cm, which allows it to be used for cutting long tiles. Its design also takes into account the use of a built-in ruler, which eliminates the need for preliminary marking.

The cutting depth of such a device reaches 30 mm, which is a very high figure. BISON EXPERT 33195-60 is equipped with a carriage on bearings and has a comfortable handle. And also thanks to this mechanical tile cutter, you can make cuts in tile material at an angle.

Of the disadvantages of this model, only one can be noted, namely: the presence of play (gap) in the roller. Such a minus can affect the cutting accuracy. The cost of the domestic device BISON EXPERT is approximately 3350 rubles.

Manual tile cutter RUBI STAR: model characteristics

RUBI tile cutters are manufactured by a famous Spanish company and are famous best quality. The RUBI STAR-60-N model is one of the best examples of this manufacturer. In most cases, such tile cutters are used by professional tilers.

Helpful information! The base of the RUBY manual tile cutter has good strength characteristics and high rigidity. And well-fixed guide elements eliminate the possibility of free movement of the cutter when cutting. Thanks to this, the cut is almost always perfectly smooth.

The RUBI STAR-60-N model has a set of interchangeable cutters for different types of tiles. Their thickness varies from 6 to 10 mm. It is also worth saying that this model equipped with special plastic wings for additional fixation of the tiles.

Of the shortcomings, only one can be noted - the rather small cutting depth, which is a maximum of 12 mm. average cost RUBY tile cutter costs RUB 7,500.

Electric manual tile cutter STANLEY

The production of these devices is carried out by a company from the USA. The main difference between the STANLEY STSP125-B9 tile cutter is its low weight. The engine of this device is slightly more powerful than its competitors, which is a small plus.

Separately, it is worth mentioning that the STANLEY STSP125-B9 electronic model has a large cutting depth (41 mm). Thanks to this, it becomes possible to work not only with conventional facing materials, but also with fairly massive slabs.

STANLEY STSP125-B9 can be used in both “dry” cutting mode and “wet” cutting mode. The average price for such professional electronic devices is 3,500 rubles.

Electronic manual tile cutter STURM

STURM models are manufactured by a Chinese company and have better functionality compared to competitors. The STURM TC-9811 model is a very compact device, which significantly increases its versatility and operational scope.

The main feature of the tool is that it is equipped with a system that cools the disk by supplying water. This eliminates the possibility of overheating the tiles and damaging them. The cut made by such a tile cutter is almost perfect.

Other advantages of the TC-9811 include the ability to make 45° cuts. And he can also find non-standard application(as a strobing apparatus). Additional equipment for this electronic tile cutter includes a second diamond blade and spare brushes. The average cost of the device is approximately 2,600 rubles.

A device for cutting tiles can be purchased at a specialized store, a construction hypermarket, or ordered online. In the latter case, there is a possibility of purchasing defective products, so it is recommended to be careful and not order tile cutters from dubious sites.

How to choose a manual tile cutter? There are a number of important factors that you should pay attention to when choosing a device for cutting cladding materials. Let's look at each of them in more detail.

Appearance. The visual component is important when choosing a tile cutter. Special attention must be paid to the base, which must be of high quality and durable. Its thickness should be sufficient for ease of use of the device.

Helpful information! When choosing a tile cutter, it is worth studying the lever and guide elements. For example, when cutting porcelain stoneware, you need to apply great effort, so the tile cutter in this case must have a long handle.

Length working area tile cutter. When choosing a tile cutter, you need to take into account the diagonal length of the tile you are working with. It is desirable that the length of the working area be no less than the diagonal of the facing unit.

Travel of the carriage along the guide elements. During operation of the carriage, its movement should be smooth. Under no circumstances should it get stuck when moving or swing due to play. Bearings can be included in its design, which is a definite plus.

Roller performing the cut. The roller should not have any play, and its movements should be smooth. If it fails, replacing this element should not be difficult.

How to choose a tile cutter depending on the purpose? If your work requires a device for reusable use, then you should think about purchasing a manual professional tile cutter. Buying such a device is not difficult, and it can last for many years. For one-time use, a less expensive Chinese-made model is suitable. And to trim 1-2 tiles, you can take an amateur model in the form of a pencil or wire cutters.

There are many materials on the Internet that will help answer the question of which manual tile cutter is best to buy. Reviews on websites of relevant topics will also help you decide on the choice of tool.

How to use a manual tile cutter

In order to answer the question of how to work with a manual tile cutter, it is necessary to study the algorithm of actions in detail. Let's look at the process of cutting tiles step by step:

First of all, you need to determine the size of the trim. It is very important to take into account wall gaps and seams.
Guided by previously determined measurements, you need to place the ceramic tiles on the bed of the cutting device.
Next, you need to adjust and align the tiles along special lines.
Holding the tile, it is necessary to draw the cutting element along the cutting line.
Finally, you need to lower the legs of the separator on the handle and press (with force) the lever.

Knowing how to cut tiles with a manual tile cutter and performing all of the above steps in the right sequence, cutting the material will be easy. In this way, you can make cuts up to 1 cm wide.

The tile cutter is functional construction tool, which can significantly simplify the work of laying ceramic tiles. For more efficient work It is recommended that you familiarize yourself with the device various instructions on the topic of how to work with manual tile cutters. Videos on this topic can also be easily found on the Internet.

How to cut tiles with a manual tile cutter: video

Today, ceramic tiles are a very common finishing material, as they are practical and aesthetically pleasing. appearance and durability. To install it, you must have certain skills and special tools, for example, a tile cutter. This is the simplest, but at the same time the most necessary equipment in working with ceramic tiles. When choosing a tile cutter, a lot depends on the characteristics of the tile, so you first need to buy the tile, and then the tool for cutting it. So how do you choose the right tile cutter? In this article we will try to figure this out.

Tile cutter - design, features

Tile cutter is special tool, which is used for cutting all types of tiles - stone, tile, porcelain stoneware, etc. Using this tool, you can make a high-quality cut of tiles, and you can get a cut line not only at a right angle, but also vary the angle up to 45 degrees.

The design of a modern tile cutter consists of a cutting element, a protractor, a floating base and one guide. The main part in a tile cutter is the cutting roller, which is mainly made of carbide steel.

A distinctive feature of all tile cutters is the ability to cut both ceramic facing and floor tiles.

Agree, cut porcelain tiles an ordinary grinder difficult, and the cutting quality is not always very good. A tile cutter for porcelain tiles can cut porcelain tiles efficiently and relatively quickly without any problems.

Five criteria for choosing a tile cutter

When choosing a tile cutter, regardless of which one constructive option has been selected, the tool must have 5 main criteria:

No defects or other external defects. When choosing a tool, you need to visually inspect it, check the build quality and condition of the materials. After this, you should start the machine, check the quality of the engine, work table, adjustments and whether there are any additional vibrations.
Engine power. When choosing a tile cutter, you should take into account the volume of work, the thickness and hardness of the material being processed and select a motor of the required power.
Ability to cut material at an angle. Adjusting the angle must be quick and easy, and the angle must be accurately maintained without errors.
Diamond disc. It is the “weapon” of the tile cutter. It is important to know the quality, purpose and type of disk that is present on the device.
Availability of spare parts. Nothing lasts forever, so this criterion is relevant primarily for all tools, but for a tile cutter it is doubly relevant, since finding spare, necessary parts is not so easy.

Which tile cutter to choose - manual or electric

Manual tile cutters - characteristics, advantages, what to look for when choosing one

A professional manual tile cutter is the simplest and most convenient to use. His robust design allows you to cut tiles precisely in a straight line. It is used for tiles with a thickness of no more than 1.5 centimeters, and for cutting 8-mm wall tiles, a special tile cutter up to 40 centimeters long is used.

Manual whip cutters are designed according to the following types:

roller;
mechanical;
on bearings.

Roller tile cutter is quite simple in design; the cutting element is a roller made of hard alloy.

Mechanical tile cutter It has a rigid carriage, which allows you to cut material with extreme precision, including fairly hard tiles.

Tile cutter on bearings designed for special processing durable tiles up to 16 mm thick. This tool has the ability to run very smoothly, since there are bushings on 2 bearings.

When choosing a manual tile cutter, you should pay attention to the strength of the frame, the length of the tool and the smoothness of operation.

The base of this tool should be rigid to avoid shock absorption when cutting tiles. The stronger the handle of the tile cutter, the more powerfully you can press the lever. It is better not to buy a tile cutter that is too small, but to purchase a universal model that is suitable for both floor and wall tiles.

The majority of tile cutters are equipped with bearings to ensure smooth sliding. There are, of course, models without bearings. In this case, when choosing, you need to make sure the sliding quality of the working fluid.

Advantages of manual tile cutters:

Independence from electricity. Compared to electric tile cutters, this is a significant saving. In addition, manual tile cutters can be used in any weather conditions, even with air humidity up to 90%.
Small sizes. For their operation it is not necessary to allocate additional space or part of it, that’s enough small area floor or table.
Ability to move from place to place. Due to their low weight (0.2 - 9 kg) they are very comfortable and practical.

When carrying out large volumes of work, it is best to use an electric tile cutter. Unlike manual tile cutters, an electric one cuts tiles much more accurately, faster and with less loss. Tiles may burst during cutting due to increased temperature, so electric tile cutters are equipped with water and air cooling systems.

A water-cooled tile cutter is gentle on tiles and is capable of making cuts neatly and evenly without splinters. The liquid, which is located in the tank under the engine, must be supplied to the cutting zone forcibly and with feed regulation.

During operation, it does not overheat and does not fail due to the constant supply of water during operation.

Advantages of electric tile cutters:

Capable of cutting at an angle of 45 degrees, which is important when laying wall corners.
Precise cut without rough edges
Minimal time spent on work - less than a minute is spent on one tile
Easy, convenient cutting of both porcelain tiles and stone.

There are two types of electric water tile cutter:

with a lower engine;
with overhead engine.

The cutting tool with a bottom-mounted motor is very compact and can work in small spaces and is capable of cutting tiles of almost all sizes. For more accurate and convenient cutting, tile cutters are used with the motor located at the top.

When choosing an electric tile cutter, you should pay attention to the following parameters:

The depth of the cut. It should vary between 3 - 4 cm.
Length of cut. It should be within 50 cm.
Engine power. This indicator should be selected depending on the purpose of the tool and the type of tile.
Cutter diameter. Cutters with a diameter of 18-20 cm are mainly used.

Cutting tiles with a tile cutter

Before starting work, you must wear special safety glasses and headphones to protect sensitive organs from fragments and excessive noise from the tile cutter.

You need to make sure that the wheel is securely fastened and does not move from side to side, as this can lead to an uneven cut. You also need to check its degree of wear; if there is a need for replacement, it is better to purchase a new wheel.

If you are using a manual tile cutter, apply some oil to the guide frame of the tool before working.

To make a quality cut with a tile cutter, you first need to mark a cutting line on the tile with a marker. Then you need to place the tile on the base of the tool, securely fixing it to avoid vibration. Next, in one quick movement, draw the knife along the entire length finishing material. The cut is made on the front side of the material. It is best to move the cutting material with both hands in order to make an even cut and avoid the formation of splinters.

When touching the tile and the tile cutter knife, the pressure force should be minimal. Do not press the tile too hard as this may cause it to split. Next, it needs to be gradually increased, decreasing towards the end of the tile. If you are cutting for the first time, it is best to stock up on a few tiles in order to practice.

The tile cutter has jaws made of metal. They are used to separate two pieces of already cut tiles. Use these sponges to gently press the tile on both sides; it should separate with a slight click.

If necessary, the cut edge of the tile can be trimmed sandpaper or a grinding stone.

Tile cutter brand

The RUBI tile cutter is capable of quickly and, most importantly, evenly cutting all types of tiles and porcelain tiles.

Advantages of the rubi tile cutter:

There are solid steel guides. They guarantee excellent quality cutting performance and long service life.
The most effective and convenient systems bushings This eliminates the use of bearings that can wear out and break.
The tile cutters are made from very durable aluminum, making this tool both lightweight and durable.

The Matrix tile cutter is used for cutting tiles up to 1.4 cm thick and 30-60 cm long. This tile cutter has only 1 guide rail, which covers the carrier carriage on both sides. It moves using a ball bearing mechanism.

The matrix tile cutter has a special rail coating and alloy, which ensure reliable adhesion between the rails and the ball mechanism.

The CORVET tile cutter is used for cutting tiles both at right and oblique angles, and for combined angles.

There are two types of tile cutters of this brand: an automatic saw and a tile cutter with a manual mechanism. The tile cutting machine can operate in multifunctional mode and is able to determine the diameter of the tile and the correctness of its fastening using CNC.

When working with a construction tool such as a tile cutter, you must follow some rules to avoid the possibility of injury.

Splinters generated during operation can damage your eyes, so safety glasses should be used. Don't put your hands too close to the cutting tool. If used electrical equipment, then you need to be especially careful.

Electric tile cutters do not tolerate high humidity. It is important not to overload the tile cutter by trying to cut very quickly or very thick tiles. This could cause the engine to overheat or the tiles to crack.

Particular close attention should be paid to the cable of electrical equipment - it should not get in the way, twist or bend.

The quality of tiling work depends on the tool. The times of a minimalist approach to tools are gone; today it is often impossible to carry out cladding at a decent level without having the appropriate tools. First of all, this aspect is important when cutting ceramics. The qualifications of the tiler and the outcome of tiling events are highly likely to be determined by looking at the tile cutting machine that the master uses. Glass cutters, scribers and even mechanical tile cutters do not guarantee high-quality cuts for many modern materials. Therefore, when striving for the perfect trim, pay attention to a power tool.

Even today most of wall ceramics lends itself to the good old scriber, and floor tiles mainly within the capabilities of mechanical tile cutters. But what to do on an object that is complex, in terms of materials? The glass cutter does not cut porcelain tiles, and the “mechanics” almost always suffer from play. Professional tiler V modern realities- a specialist who has an electric tile cutter in his arsenal. On the path to professionalism, you need to understand what specialized power tools are available. Manufacturers offer:

manual electric tile cutters;
stationary with engine below;
stationary with the engine at the top;

Quick navigation through the article

Manual electric tile cutters

The simplest type cutting tool powered by mains or batteries. The principle of operation is similar to an angle grinder, the differences lie in the “tile” specialization. Yes, it contains:

comfortable handle;
support sole;
adjustment of the disk immersion depth and tilt angle;
the ability to connect a dust collector or container with water (for wet cutting);

It is possible to work without dust in a horizontal position, so trim the laid wall tiles It won't work out completely. There are also larger variations that run on batteries. They no longer resemble a grinder, but they still don’t reach the title of machine tool. Their peculiarity is their compactness and independence from the network.

Universal manual electric saw MAKITA 4101RH with diamond blade. Power 860 W, rotation speed 12000 rpm. Possibility of wet cutting and tilt angle up to 45 degrees. Approximate cost - 23,000 rubles.

Trimming with a manual electric tile cutter high quality is not different. Their job is to replace the angle grinder and provide comfort and mobility.

Stationary machines with bottom-mounted motors

This one and next type The tool is united by the quality of the cut and the absence of dust - machines with water cooling, which at the same time prevents dirt from being sprayed. In all cases, the cutting material is a diamond disc. Here it is stationary, one part is above the platform on which the slabs are placed, the other is below, in a tank of water.

The “lower” orientation of the engine allows the machines to be made compact. This circumstance has led to widespread of this type. When carrying out renovations in a residential apartment, it is often difficult to find a place for a bulky tool, and transporting a “bottom-drive” tile cutter is much more convenient. But the main advantage of this type is the ability to cut dimensional tiles. There are no limiters on the support platform, which expands the format boundaries. The tiler is limited by skill and physical capabilities.

The disadvantage of such tools is the need to guide the ceramics along the cutting line manually. Certain skills allow you to do this without problems, but as the size of the tile increases, trimming becomes more difficult. The machines are equipped with guide rails that make it easier to fix tiles, but comfortable cutting of large-format ceramics is limited by frames small size table.

Some models allow cutting at an angle of 45 degrees. The engine is stationary in any case, the platform tilts. The disks used in machines of this type are large (180-300 mm). However, the “tip of the iceberg” protrudes above the frame. The rest is left to the hydrocooling system. This circumstance entails a limitation on the cutting depth; usually the range is not impressive.

Let us summarize the advantages and disadvantages of the described type of tile cutters:

compactness;
increased slab format;

narrow cutting depth range;
insufficient cutting quality due to manual handling of slabs;

To ensure high-precision cuts and comfortable work, arm yourself with heavier weapons.

Stationary machines with overhead engine

This type of electric tile cutter is a professional tool. It is not compact, relatively expensive and structurally complex. There are two types of “top-drive” water-cooled machines:

Pavements. The cutting part is movable and moves along guides.
Console. The platform is movable, the console is fixed.

We’ll leave it up to you to decide which type you prefer; there are as many opinions as there are people. The cantilever electric tile cutter is, in a sense, reminiscent of the machine from the previous section, the advantages and disadvantages of which you already know. The first type of tool is more common among tilers. Both types are characterized by:

presence of a pump;
possibility of cutting at an angle of 45 degrees;
adjustable cutting height;
the presence of clamps, guides and tires;

Pay special attention to all design details, the quality of the final work depends on them. More details about the main nodes below.

Chinese electric tile cutter Sturm tc9822u with top motor is suitable for cutting tiles, glass, marble, granite. Power 1.2 kW, rotation speed 2900 rpm. Maximum length cutting 920 mm, depth - 48 mm. The cost of such a device is 17-18 thousand rubles.

Manufacturer of tile cutter Corvette 468 – Russia (ENCOR). The line includes machines with both bottom-mounted and top-mounted motors. The maximum length and depth of cut are for the Corvette 468 tile cutter and are 920 and 60 mm, respectively. There are models with a laser pointer to make precise trimming easier. Russian machines are united by a durable body, stable design of moving parts and efficient electronic and hydraulic systems. The approximate price of this model is 28,000 rubles.

Characteristics related to the operation of power units

Rotational speed

High spindle speed does not play a significant role here. For the cut to be effective in terms of quality and quantity, the diamond blade needs 2-3 thousand revolutions per minute at idle speed.

Engine power

This parameter is more important, and the larger the slab, the more important it is. Tile 750-1500 W is enough, while granite and marble require a couple of kilowatts. Diameter diamond blade directly related to power: in the first case, the cut is provided with a diameter of 230-250 mm, in the second you will need a 350 mm circle. The size of the machine also depends on the power; if you do not plan to work with stone, do not buy a unit that weighs over a hundred kilograms.

Cutting height

This is one of the most important factors. An electric tile cutter is purchased based on the expected thickness facing material. The mentioned 350 mm is enough to cut slabs up to 135 mm thick. A professional tiler who does not specialize in stone does not need such indicators. Working “on the edge” is not recommended due to possible overheating of the slabs, deterioration in the quality of the cut (chips, etc.) and jamming of the disk.

Typically, the cutting depth ranges from 40-110 mm, and in addition, the height is adjustable.

Electronics

An electric tool must be safe, so protection against current must be high. Especially in water-cooled systems. Despite the presence of RCDs, waterproof casings and high-quality insulation, many tile cutters require grounding.

Mechanical characteristics

bed

Depends on the dimensions of the platform maximum size cut tiles. Machines designed for cutting stone have impressive formats. The tile cutter's passport indicates the possible length of the cut, but in fact it is slightly less. By removing the clamps, you can increase the performance, but in this case, the ease of use decreases and the risks increase. In some models, the table is expanded due to support brackets or folding additional platforms.

Angle cutting capabilities

A professional electric tile cutter can cut at an angle of 45 degrees. However, some machines also offer intermediate angles. This, as well as the stability of the support system, is one of the factors determining the quality of the machine.

Water supply

With water supply.

Water in the machines is cut into the area similar type supplied by a pump. Please pay attention to the following points:

drainage efficiency;
the amount of water circulation;
availability of waste collection compartments;
nozzle adjustment;

It is good to back up general principles with examples.

The conclusion of the review is subjective, but... In our opinion, the most convenient tile cutter is an electric one, with a top-oriented motor and a movable cutting part. Pay attention to all the details:

comfort of system adjustment;
ease of transportation;
the ability to change the diameter of the disk;
overview of the workspace;
easy wheel replacement;
cable quality and length;

The effectiveness of your work depends on the nuances. Practice first on training slabs, the skill of high-quality cutting will come very soon.

comments powered by HyperComments

Most the right tool in the work of a tiler - a tile cutter. If you could just buy tiles and lay them evenly and without adjustment, the life of a tiler would be much easier. But, alas, standard tiles are not always suitable and not everywhere - which means you will have to trim them accordingly. right size. And to do this, you don’t have to worry about using “improvised means”: a specialized tool, manual or electric, will be much more convenient and accurate. And, if a manual tile cutter can be bought for separately planned repairs, then an electric one, with constant use and large volumes of work, will definitely pay off and be more convenient. We present you the rating best tile cutters, short review their advantages, disadvantages and assessment by professionals on a 10-point scale.

How to choose a tile cutter?

Before you start tiling the surface, you need to decide on the type of tile cutter to choose. Tile cutters are:

electrical;
manual (mechanical) tabletop;
manual compact.

Manual tabletop tile cutters

Mechanical tile cutters are simple in design and easy to use. The mechanism consists of the following elements:

Base (bed)
Carriage with handle
Guides
Paw
Cutting roller

Sometimes, to ensure smooth running of the carriage, it is equipped with bearings. The main disadvantage of a manual tile cutter is the limitation on the size of the tiles. You will not be able to cut a fragment longer than the frame; it simply will not fit on it. There are also restrictions on the thickness of the tiles - cutting more than 20 mm will be very problematic. As for the advantages, there are many of them:

Compactness.
Light weight.
No need for electricity.
Safety at work for the master.

Compact manual tile cutters

There are 2 types of manual compact tile cutters: nippers and roller cutters. Using nippers, you can form shaped holes in the tiles. Of course, they cannot make an even cut. As for the roller cutter, for household use it fits perfectly: it takes up no more space than a felt-tip pen, is safe to use, and costs “3 kopecks.”

Electric tile cutters

Electric tile cutters are usually designed for professional work with tiles and porcelain stoneware. With their help, you can cut a strip of any width, which cannot be said about mechanical tools (their capabilities are usually limited to 30 - 40 mm). Any configurations (except curved ones) are cut out with an electric machine, so the accuracy in the work will be maximum.

The operating principle of the tool is similar to a grinder. But there are a number of advantages:

Ideal cutting line.
Virtually unlimited cutting depth (but not larger size the disk itself, of course).

The designs of tile cutters vary greatly, each with its own characteristics and applications. In one case, hand-held “nippers” will do, but in another, a powerful electric tile cutter on a bed will be required. A mechanical desktop will be interesting if you don’t have access to an outlet - but even here you shouldn’t forget about battery-powered models, as long as there is enough energy reserve in the batteries stored in advance. And in any case, not all models are successful and worth the money - so we will traditionally begin to separate the wheat from the chaff.

When performing repairs, a lot of time and effort can be saved if you use quality tool and equipment. So, when laying tiles, it will be difficult to do without a high-quality and convenient tile cutter. Which tile cutter should I choose that is inexpensive and does its job perfectly? Tips for choosing a manual tile cutter and reviews will help you make the right choice when purchasing.

When laying tiles, it will be difficult to do without a high-quality and convenient tile cutter.

Which tile cutter to choose for porcelain tiles?

Long gone are the days when craftsmen used an ordinary glass cutter when laying tiles. Using a device for cutting glass for purposes other than its intended purpose often ended in failure: a large percentage of defects, uneven cuts and cracking of the tiles. Now craftsmen are offered a huge selection of tile cutters, differing in price and characteristics. Which manual tile cutter is better to buy?

For this you need to purchase a special tile cutter. This material is different high strength and hardness. Conventional tools are not suitable for cutting it. The following devices can be used for cutting porcelain stoneware:

Which manual tile cutter is better to buy??

The design of all models of mechanical tile cutters is rarely different. The list of main parts can include the following parts, namely:

durable body;
two guides;
device for cutting tiles.

Carbide materials, diamond coated or titanium tipped are most often used as a cutter. The cutter moves smoothly along the guides, destroying hard surface. Gradually, removing layer by layer, the master achieves an even cut line. After achieving the desired result, all that remains is to gently press the lever so that the tile breaks into two parts. Experts recommend increasing the force of pressure with a lever on the tile gradually. Only in this case can you get a perfectly even fracture.

Expensive models of manual tile cutters are equipped with very useful device- circular cutter. With its help, the master has additional opportunity cut holes of any diameter in the tiles. By skillfully using a circle cutter, curved edges can be trimmed easily.

Craftsmen call a significant drawback of manual tile cutters the limitation when working with tiles whose thickness is higher than 15 mm. Manual device It may not cut it at all, or the cut will be uneven, with multiple chips along the edge. A manual tile cutter cannot be used on corrugated surfaces, and low-quality tiles may peel along the cut line, which is considered unacceptable.

To minimize these disadvantages, engineers introduced tile cutters equipped with a cutting roller, which, when rotated, evenly distributes the pressure force on the tile. As a result, the cut line comes out more neat and even. The cutting element is diamond-tipped and the device can be used for quite a long time. Manual tile cutters with carbide coating on the cutter are less durable and allow you to cut small batches of tiles.

Manual tile cutters with a roller do an excellent job of cutting low-quality and soft tiles. Heated tiles are easier to cut and the cut line always turns out perfectly smooth. If the buyer is deciding which manual tile cutter is best to buy, then it is worth giving preference to models with bearing mechanisms. They will allow you to achieve a smooth stroke of the cutter, last much longer and make it possible to work with thick types of tiles.

?

Professionals most often purchase electric tile cutters. They are easy to work with and require little effort. It is irrational to use such tile cutters in everyday life due to their high cost. Sufficient for cutting a small batch of tiles mechanical device. Before purchasing, you should pay attention to the following parameters:

Dimensions. The size of the tile cutter bed must match the size of the purchased tiles.
The stronger the tile cutter body and guides, the longer the device will last.
Bearing-type tile cutters have a high price, but they are also more pleasant to work with. The cutting line is smooth, and the device will last longer. Some models are equipped with 6 bearings at once and such equipment is valued by craftsmen.
The presence of circular cutters, a mechanism for fixing tiles, a ruler and a square - important details, without which work is difficult.