PVC film peels off from MDF kitchen facades! What to do? MDF film: how it is glued at the factory and how to glue it yourself The facade on the kitchen unit has come off, what should I do?

If it has lost its former attractive appearance, it’s time to update it. If buying a new kitchen is not suitable for everyone, then replacing the film on the facades will be the best option for each owner. The use of vinyl film is the most budget option, which allows you to return the original look to the kitchen facade or completely change it. You can replace the film yourself, but it is better to entrust this task to a professional, because very often in the process there can be difficulties that simply cannot be dealt with without special skills.

The main advantage of vinyl film is that it can perfectly imitate natural wood, stone, leather and others natural materials. Just a couple of rolls of this film is enough and the kitchen will completely change its appearance. Such a replacement of film on facades will not break your pocket, so it is affordable option for every homeowner.

Regardless of whether the work will be carried out independently or this task will be entrusted to a professional, in any case the following list of materials will be required:

  • Vinyl film;
  • Thick fabric for smoothing the film over the surface of the facade. A plastic spatula will also work;
  • Alcohol or solvent;
  • Roulette;
  • Stationery knife;
  • Ruler and pencil.

In order for the film replacement to bring the desired effect, the facade must first be removed and placed on a hard surface. It is not recommended to carry out work suspended, as it is terribly inconvenient and there is a high risk of ruining both expectations and the vinyl film itself. In order to complete the task in accordance with all the rules, you need to know well the main stages of the procedure:

  • The door is removed and all existing fittings are unscrewed. If the fittings, frankly speaking, are outdated or worn out, then it is better to replace them with new ones. Thus, it will truly be renewed beyond recognition;
  • Before gluing the film to the facade, it is necessary to thoroughly treat its surface with water and soda. Afterwards everything needs to be wiped dry. This procedure is required to degrease the surface;
  • Cutting the vinyl film itself is very simple. Regardless of the manufacturer, back side The film is offered with markings in centimeters. Simply measure the cabinet and cut out pieces of film of the required size;
  • The film is placed face up on the façade. The protective paper is peeled off from the top of the film, and the film itself is applied to the facade and leveled using rubber spatula, soft fabric or just hands. If air bubbles appear that cannot be removed with a spatula, you can pierce them with a pin and straighten the film again;
  • If any segment turns out uneven, it is better to immediately remove it and replace it with a new one. If you do not do this right away, the film will become very firmly attached to the facade, and there is nothing you can do except remove it with a utility knife.

The easiest way to work is with a single-color film; you need to make sure that it does not cover the grooves of wood or marble, depending on what material the facade is made of.

If the updated facade does not look very impressive, then it can be diluted with vinyl stickers or patterned inserts. It all depends only on personal imagination and the materials used.

Rules for the operation of facades with PVC film

  • If it is necessary to replace the film on facades, then it is best to take a closer look at expensive and quality options who can normally tolerate high humidity in the kitchen and exposure to high temperatures;
  • Various solvents, alkalis and other acids are not in the best possible way will affect the condition of the film;
  • Can not use lighting, which will be installed to the facade with film at a distance of less than 10 centimeters. This is especially true when the lamp uses a conventional incandescent lamp. This will cause the film to begin to fade, wrinkle and burn through;
  • Facades with film, which are installed near ovens, must be recessed by 3 or more centimeters relative to a gas or electric stove.

If there are also a few points that are under no circumstances allowed with the use of facades and other furniture that is covered with vinyl film:

  • Facades cannot be installed near the source great heat, as well as in places where there is a direct hit sun rays. Otherwise, the film may change its color, which will lead not only to the loss of attractive appearance of the entire product, but also to film peeling;
  • It has been laboratory proven that it is prohibited to use facades and other furniture with glued vinyl film at temperatures below 20 degrees and above 60 degrees, relative to an air humidity of 80%. Otherwise, significant damage to the material occurs;
  • After replacing the film on the facade, you need to wait several hours so that it is well fixed on the surface. After this, the facade can be returned to its place. Otherwise, cracking of the film may occur;
  • It is necessary to exclude, as far as possible, moisture from entering the façade. If this happens, try to immediately remove the moisture using a soft cloth.

Facade painting

It is worth noting that it is possible to restore a damaged kitchen facade not only with the help of vinyl film, although its presence will serve as additional protection. A very popular option for updating the kitchen facade is painting it. It is worth noting that painting is useful in cases where the facade has retained normal condition. If there are large cracks or chips, then ordinary painting will not get rid of it. To paint the facade, you must perform the following steps:

  • The façade is removed;
  • All fittings and hinges are unscrewed;
  • The surface is well cleaned and degreased;
  • The facade is cleaned using abrasive sandpaper;
  • The surface of the facade is wiped with solvent;
  • The facade is painted directly. It's best to paint first hard to reach places. A thin brush will be useful for this. It is most convenient to use a paint roller on a flat surface. The paint must be applied in several layers. It is worth noting that it is best to cover the facade new paint can be done using a car aerosol;
  • After painting is completed, you can use a stencil to create interesting patterns, which will only increase the aesthetic component of the updated facade. Afterwards you can return the façade to its place.

Separately, it is worth noting that after the paint has dried, you can stick the already familiar vinyl film onto the facade. Can be used as transparent film, and with an existing shade, which, if chosen correctly, will create a very beautiful effect. The film must be applied only after several hours of painting. Before this, the surface of the facade must be thoroughly degreased again so that the film can adhere well to the surface of the facade.

Furniture manufacturers are constantly asking themselves the question: what kind of furniture should they make so that people will buy it? On the other hand, the consumer is looking for a manufacturer who will make custom-made furniture that suits his tastes. As a rule, the cost, appearance and attractiveness of cabinet furniture is determined by its façade. Therefore, both the manufacturer and the buyer, in order to reach a compromise, must answer main question- what facade would be better suited for this piece of furniture.

According to marketing research, the most popular among domestic consumers (among the assortment indicators) are: the following types furniture facades:

1. Laminated chipboard, including postforming and softforming;

2. Facades made of MDF, including those wrapped in PVC film and painted;

3. Facades made of solid wood and veneer;

4. Frame facades made of MDF;

6. Other types of facades.

To determine which facade is better, you should draw an analogy with their cost indicators, or rather, try to identify the relationship between the market price of a furniture facade and its popularity. The rating of price groups for furniture facades is as follows (in descending order of cost):

The biggest advantage of painted MDF facades is the diverse range of colors of the paints and varnishes used, which can be selected independently by tinting. In addition, paint manufacturers offer big choice special effects coatings: metallic, chameleon, pearl, marble, space, mother-of-pearl and much more. On the other side, positive characteristics MDF boards (strength, environmental friendliness, moisture resistance) significantly influence the position in the quality rating of furniture facades, and the increased heat resistance of the paint layer raises it one step higher.

However, virtually everything technological stages The manufacture of painted MDF facades is based on manual labor (priming, sanding, painting, patination, polishing), which significantly affects the cost of the final product and practically puts it on the same price level as products made from solid natural wood.

Solid wood facades

Furniture facades made of solid wood most often find approval among respectable people, fans of antiques and natural materials. Solid wood furniture, made in a classic style, combines not only aristocratic nobility and grace, but also sensual warmth, weightlessness and harmony of home comfort.

In addition, the facades are made of solid wood natural wood are the most environmentally friendly, will always remain in fashion and proper care will last for a long time. As they age, they are easy to restore. And solid wood facades age beautifully in their own way.

For the manufacture of facades such valuable species wood, such as beech, oak, alder, pine, acacia... Often, to reduce the cost of the product and increase the resistance to deformation of the facade structure, veneer and chipboard (or MDF) covered with veneer are used, including birch, cherry, chestnut, walnut, maple, as well as exotic breeds: wenge, teak, zebrawood, makore, anegri and others.

The technology for manufacturing furniture facades from solid wood includes a long process of drying the wood, as well as sawing, milling, grinding and assembling a large number of small parts of the frame and façade panels, coating paint and varnish materials. Manual labor is used at almost all stages of production, which is why the price of solid wood furniture facades is so high.

Despite its advantages, wooden furniture has its drawbacks: increased sensitivity to humidity, temperature, sunlight, special requirements to care for facades, the ability to absorb odors, moisture and change color over time.

Frame facades made of MDF profiles

MDF frame facades are a structure made of special MDF profile with glass inserted inside (including mirrors), MDF board, laminated chipboard or plastic. The profile can be straight or with decorative milling, usually lined with PVC film (less often melamine paper) with a textured pattern to resemble wood, metal, etc. A special advantage of framed facades is the ability to combine various contrasting colors of the MDF profile and internal filling.

Even small businesses can purchase inexpensive equipment and master the production of frame facades. furniture company. In addition, it becomes possible to move away from standard sizes of furniture fronts and work with individual orders.

The disadvantages of MDF frame facades are, first of all, open seam joints, which allow moisture to pass through when washed. Film covered PVC profile can't stand it high temperatures. The prefabricated structure may become loose and sag over time.

Frame facades made of aluminum profiles

Understanding the questions of what types of furniture facades there are and which facade is better, one cannot help but touch upon the topic of frame facades made of aluminum profile, which represent aluminum frame with the insertion of fillings made of various materials: MDF, glass, plastic and others. Best use facades is the production of furniture in modern Art Nouveau or hi-tech style. Facades filled with wood look especially original. various glass With decorative films, stained glass, engraved, textured or mirrored. Most often, aluminum profile facades are used in combination with other furniture facades, designed in the same style.

Basic information about film facades


Finally, I’ll tell you what film facades are, what their advantages and disadvantages are.

Film facades are a popular solution for making furniture mainly for kitchens and bathrooms.

The scope of application of furniture made from such material is not accidental, since MDF board, covered with PVC film, resistant to excess humidity. That is, if there is no hood installed in the kitchen, and there is no hood in the bathroom effective system ventilation, the furniture you buy will last for many years.

Can the same be said about self-upholstered furniture? vinyl self-adhesive? Unfortunately, self-clad facades are not as reliable as factory-made counterparts.

Self-adhesive, no matter how well it is glued, cannot guarantee the absolute tightness of the coating. Factory facades do not have open gluing areas, and therefore wet air cannot have any effect on MDF.

Comparing whether film or enamel or plastic is better for MDF, I note that all coatings have certain disadvantages that need to be taken into account when choosing furniture. But film facades have one drawback - the impossibility of restoration if the film is damaged. However, the price of these facades is acceptable and, if necessary, they can be completely updated.

Conclusion

This time you learned about how film facades are made in industrial conditions and how to make something like a factory facade at home. Still have any questions? Ask them in the comments to what you read, I will answer all of them. By the way, I recommend watching the video in this article.

In order to hide scratches and defects received during the use of furniture or to renew the surfaces of facades and panels, a special film is used. It is durable, has an attractive appearance and rich color palette. To figure out how to glue self-adhesive film to furniture, you need to consider in detail its features and application methods.

Furniture film helps to visually refresh furniture panels that have become boring over time. short term. With the help of simple manipulations, the procedure can be done with your own hands in a few hours. To do this, you only need the material itself and sharp scissors or a construction knife.

Today, the range of this raw material occupies a leading position among other methods of furniture restoration. With the help of the material you can realize any design solutions into life, without spending a lot of money.

The popularity of using self-adhesive is due to its following advantages:

  • the material is supplied in rolls, making it easy to cut rectangles and squares of the required dimensions;
  • the film helps protect furniture from future scratches and chips, and if they do appear, replacing the material will not be difficult;
  • self-adhesive film will help preserve family budget: you don’t have to purchase a new headset if it is possible to update old products;
  • no additional tools are required for work;
  • good for kitchen furniture, protecting it from grease, dirt and other damage;
  • the material is easy to clean, self-adhesive compounds can be treated with detergents and gels.

The raw material consists of several layers: front, adhesive, protective. Each of them performs its own function. The very first layer - the front layer - is made of different options materials:

  • polymer film - represented by a self-adhesive type of vinyl, which perfectly covers surfaces. She looks very beautiful on furniture, and her decorative abilities are invaluable. In addition to vinyl, PVC or polyester is used;
  • foil - used for lining less used pieces of furniture, most suitable for wall cabinets;
  • paper - paper-based material can be glued to the ends of the shelves, since such a film does not withstand constant mechanical stress.

Decorative film can imitate a large number of surfaces: leather, wood, natural stone, ceramics, tiles and fabric. Thanks to this, it has a wide range of applications not only in updating facades, but also in ordinary decor.

Depending on the material of manufacture, self-adhesive film is divided into:

  • single-layer roll products - produced on the basis of polymers, additives in the form of plasticizers, which give the raw material strength: all components are mixed together and flat rolls are formed by extrusion;
  • two-layer models - in this case, two canvases are used in production: the base and the surface, such material technical specifications worse than its single-layer counterpart.

Anyone can glue furniture on their own; no special skills are required. Before you start working, choose the surface structure of the film; it can be glossy, matte, transparent, mirror and holographic. Each type is used in individual cases, so it is important to determine in advance the purpose of the raw material.

Choosing a film based on the type of room

In order for pasting of furniture with self-adhesive film to be successful and to serve for many years in the future, you need not only to purchase quality material, but take into account the type of room in which the surface will be used. Raw materials for the kitchen and bedroom have their own characteristics, so when choosing, use the following tips:

  • film for furniture intended for the bedroom or living room should not only have an attractive appearance, but also fit into the interior. If previously the fronts of cabinets and tables had a certain color, it is not at all necessary to repeat it - you can purchase rolled products of a different shade, but do not forget about compatibility with upholstered furniture and finishing. For well-lit rooms, a matte film is ideal - its structure will be clearly visible when sunlight. When choosing a self-adhesive base for the bedroom, pay attention to products that imitate natural materials. Such options would be appropriate for decorating the facades of cabinets and chests of drawers;
  • To make your kitchen set look like new, you can also paste it over vinyl material. For this room, the strength characteristics of the raw materials and the ability to constantly withstand mechanical stress are very important. Gloss would look good here, but remember that the surface requires careful care. Many designers recommend using self-adhesive compounds with photo prints and bright images. The pattern of citrus fruits will suit the kitchen space;
  • You can also update the furniture in the bathroom or toilet using this raw material. Thanks to its properties of not absorbing moisture, the pasted surface will not only look beautiful, but also be practical. For the fronts of cabinets and cabinets in the bathroom, use options that are consistent with color scheme facing tiles floors and walls;
  • To freshen up the children's room, glue on material depicting your favorite cartoon characters. Children always enjoy new things, and such a surprise will delight them. An assortment of films with fairy-tale characters will help your child make right choice. Raw materials are used to process wardrobes, bedside tables and even tables for doing homework. If it's not in the plans complete replacement appearance of furniture, you can focus on using individual patterns for decoration.

To update outside glass cabinets and showcases, treat the furniture with self-adhesive transparent film. This material often has a small printed pattern that will help diversify glass facades.

When choosing a material, think carefully about the future design. Some varieties of holographic or glossy film may have reverse effect and will create a feeling of clutter in the room.

Application technology

Before sticking the self-adhesive film on the furniture, you need to prepare the tools for the job. These include:

  • scissors and a sharp utility or construction knife
  • soft fabric to smooth out wrinkles;
  • roller for removing air from the material;
  • solvent;
  • primer mixture;
  • medium-dispersion sanding paper.

In the process of pasting furniture with film, it is first necessary to prepare the surface of the products by treating them with a special composition. For this, a primer is used, which improves the adhesion of the two planes.

Preparation proceeds as follows:

  • tighten all hinges and fasteners of the furniture product. Also check that all screws are screwed in completely; if this is not done, small protrusions will be visible on the glued surface, which will significantly affect the aesthetics of the appearance;
  • examine the furniture for cracks and chips. If there are any, they must be removed using putty. Gently apply the mixture to the defect areas and fill the voids. After drying, treat the areas sandpaper- this will give greater adhesion to the surface being glued;
  • The next step will be degreasing the plane. Before gluing the film to furniture, soak the cloth in solvent and go through all the corners and hard-to-reach areas furniture board, which will be subject to processing by the material.

When the surface preparation is completed, we proceed directly to the gluing process itself. To avoid shortcomings, follow the proposed algorithm of actions, which can also be found in the video in the article:

  • produce necessary measurements furniture to cut the required pieces of material;
  • using scissors, cut from the roll exactly as much as is necessary for gluing the surface;
  • before pasting furniture panel, release the material 10 cm from the protective layer so that the adhesive base is exposed;
  • attach a piece of raw material to the furniture with an adhesive layer and gradually, smoothing the film with a roller, remove the remaining material from the protection;
  • It is necessary to smooth the plane from the edge that is already glued to the area that you are going to glue. In this way, it will be possible to avoid the formation of folds and wrinkles on the surface being pasted.

There is another method of treating furniture with film, which is based on the use of a wet solution of water and soap. Here, gluing the raw materials correctly will not be difficult. In this case, protective layer completely removed, the material is placed on the floor, face down. The solution is applied to adhesive layer using a sprayer, after which the film is applied to the surface. It is appropriate to stick the material using this method if there is large areas finishing when to achieve perfect smooth surface difficult.

Taking measurements

Cutting the film

We apply it to furniture

Smoothing

Common mistakes

Sometimes, even after finishing the furniture, bubbles, folds and other defects may appear that were made during work. Correcting defects is not possible in most cases, so the film must be removed and the procedure will have to be repeated again. When doing the work yourself, you can make the following mistakes:

  • Before gluing the material to the surface, it was not treated with a cloth or brush. Important point removing dirt and dust causes a smooth coating, and the presence of small particles of dirt underneath will spoil the appearance;
  • the cut piece was not enough to cover the shield. This happens if you don’t take a few centimeters in reserve when cutting. Usually it is calculated at 2-3 cm, which can easily be measured on the back side of the material, where the measuring grid is located;
  • the drawing on the plane does not match. Answering the question: how to properly glue a film that imitates natural materials, it is worth emphasizing that it must be cut at the seams - then there will be no problems with the pattern shifting;
  • Furniture defects are visible under the coating. The reason for this error is poor preparation of the base or the use of too much thin material. If the furniture is old enough, then it is better to use rolls with thickened front layer. Before gluing self-adhesive film on furniture, all damage must be removed.

To do the job efficiently and to paste the furniture yourself without any defects, follow the technology for applying the material. It is better to pre-twist all the fittings, and the elements collapsible structures process separately. Properly done work will delight all family members with a beautiful updated look of furniture products.

Most people have a special relationship with kitchen furniture. If the interior of the living room is easy to update by buying furniture in a different style and color, then a sane person will not change the kitchen set every year. It's too troublesome and expensive. Most often, furniture covered with façade film is installed in the kitchen. This is convenient - you can choose any color or surface imitation you want. The film is a very durable material and is applied in a special way when heated. Sometimes annoying misunderstandings occur, and for some reason the film comes off the surface of the furniture. We will find out further what to do if the film on the kitchen facades comes off.

So, what to do if the film falls off on kitchen set?

Firstly, don’t panic or get too upset.

Secondly, understand the reasons in order to understand whether restoration of film facades is possible. There may be several reasons:

  • — Masters involved in pasting kitchen facades, glue was not applied to the entire surface. Human factor, it's nothing you can do. It is quite easy to miss some areas, and it is to these areas that the film will not stick.
  • — The craftsmen used low-quality glue. It also happens: the glue is applied correctly, but its composition leaves much to be desired. Or is it not mixed well enough if we are talking about a two-component polyurethane glue. First you will see bubbles on the film, and then it will completely come off on one side. By the way, the shelf life of the glue also matters. Yes, yes, even in repairs, materials have expiration dates great importance. Therefore, you must definitely pay attention to the deadlines so that you don’t have to worry about remodeling the film facades of the kitchen afterwards.
  • — The masters did not comply with the required temperature regime. Repair of film facades is usually required if the film was not heated properly or the room was too cool. Another option is that the blanks for the facades themselves were cold.
  • — You violated the rules for using façade film. Restoration of film facades may be necessary if the kitchen is too humid, hot or, conversely, cold.

Re-gluing of film facades?

The second important question that the “victims” ask themselves is whether re-gluing the film will help? Most people strongly associate the repair of film kitchen facades with re-gluing the film. If the furniture is under manufacturer's warranty, this option is indeed possible. You contact the seller, he contacts the manufacturer, and the issue is resolved. But what to do if the film falls off from the kitchen facade, and the warranty on the furniture has long expired? Do you really have to buy new furniture? Calm down, the situation is fixable. possible! And repainting film facades will help here.

Here the third important question arises - is it possible to paint kitchen facades yourself? Of course you can. But keep in mind that you will have to do some serious preliminary work. For example, choose a paint with a suitable coloring composition. It's not as simple as it seems at first glance. There are many paints on the market and not all are suitable for the kitchen. For example, varnish in conditions of humidity and exposure to an aggressive environment ( detergents) is unstable. But auto enamel, on the contrary, loves warmth, is resistant to moisture and generally has little fear of damage.

In order not to bother with the choice of paint, you should turn to professionals. By the way, they will suggest interesting things interior solution, because in the case of painting, you can combine two or more shades. Experts also know exactly what Additional materials will be required. It is unlikely that you will find it at home construction hair dryer or a sander. Professionals can carefully remove the remnants of the film that has begun to peel away from the facades. They are also familiar with the nuances of painting facades. For example, here is one of them - facades need to be painted in one direction. There can be even more subtleties if you want to paint the furniture in several different colors.

Let's summarize: what to do if the film falls off from the kitchen facade? There are several options.

Extreme - buy a new headset.

Lingering - get busy self-updating films or painting facades. This can cost millions of nerve cells and up to tens of thousands of hard earned money. Will you provide a guarantee for your own “handicraft” and will you be able to redo unsuccessfully completed repairs? As they say, measure seven times and then cut.

The smart option is to have more experience, relax and enjoy your holiday while the professionals work.