House bathhouse 6x6 2 floors. Two-story bathhouse project

A spacious sauna is the dream of any steam lover. The size and dimensions of the building largely depend on the free space on suburban area or dacha.

Popular size for spacious personal plots is a 6x6 m bathhouse.

Peculiarities

The design of a 6x6 m bathhouse is quite simple and unpretentious. However, externally such an object looks solid, spacious and “our way.” The resulting structure is functional inside; it can be divided into several isolated rooms, including a walk-through recreation area.

The advantages of the dimensions of a 6x6 m bath are:

• large spacious seating area up to 17 sq. m.;
• the ability to build a spacious steam room with a separate combustion room and utility room;
• a separate vestibule or hallway, which will allow you to undress comfortably and keep warm in the bathhouse itself;
• the opportunity to equip the building with an open terrace, on which in the summer you can place comfortable chairs, hammocks, tables, winter time stand in the fresh frosty air, remaining under a canopy;
• the presence of a separate bathroom, as well as a shower or washing room.

For a bathhouse of this size, you can consider a project with an upper attic floor and a balcony, which will allow you to allocate space for a guest room or, for example, for billiards. This bath size is optimal and comfortable for simultaneous use by several people (up to 8).

If you expect that such a bathhouse will be used frequently by a smaller number of people (for example, if we are talking about a young family), it is important to consider that the bathhouse must be constantly heated. How bigger room, the longer it will take to heat it up and waste fuel resources(wood or gas with water supply system).

Materials

When choosing a material, you should take into account its availability, as well as the characteristics of the building. The choice is wide; the technology for constructing a bathhouse depends on the choice of material.

Log house

At all times, the most popular material for the construction of baths in Russia was natural wood. A log house was made from round logs, which had all necessary qualities for a real Russian steam room.

These include:

• high level of thermal insulation;
• environmental friendliness and safety of the material for human health;
• low level of shrinkage;
• good sound insulation;
• light weight of the structure, which allows you to save on the foundation.

The chopped sauna has a pleasant aesthetic appearance and smell when heated inside. This material allows you to implement various projects, including with an attic floor. Wood has good level natural ventilation, such material “breathes”. At the same time, there is always the opportunity to purchase a ready-made log house. Among the disadvantages of a log house, several negative factors can be identified.

In addition to the increased risk of fire, wood releases moisture over time:

• Vapors take a long time to erode from wood; they tend to linger in the structure of the material, which leads to rotting and mold.
• It is necessary to carry out additional work to seal seams and gaps between elements.

To reduce the influence of negative factors, the wood is subjected to special treatment. Antiseptics against mold and impregnations against rotting are used before construction begins..

To create a certain stylistic unity on the site, the log house can be decorated with decorative building materials. For example, it can be plastered, lined with brick, or lined with stone. Country style or country music does not need external transformation.

Frame bath

But such an object has a number of negative factors:

• required additional work on insulation and high-quality finishing;
• shrinkage of the foundation can be up to 10 cm within 2 years;
• due to significant shrinkage, many Decoration Materials for the facade they lose their presentable appearance (they crack, chip off).

To insulate and insulate floors, it is necessary to use special expensive polystyrene foam and cotton wool, which do not emit toxic substances when heated strongly, and are also not afraid of high humidity. The insulated foundation should be covered quickly, otherwise under the influence environment it may lose its properties and deteriorate.

One person cannot take part in the construction of a bathhouse, since many of the elements are quite voluminous and heavy. Frame baths cannot be called budget option, even thanks to the absence of significant expenses on the foundation. However for those who are in a hurry to complete construction and start enjoying the finished building, this option is ideal.

Made of brick

Not the most popular brick baths. When assessing the pros and cons of such buildings, it is rare that the choice is in favor of such building materials. Before building such a bathhouse, you should evaluate the positive and negative aspects.

The advantages of brick and buildings made from it include:

• strength and resistance to mechanical damage;
• long service life;
• heat resistance, no negative impact on sudden temperature changes;
• presentable appearance, as well as the possibility of erecting unusual architectural elements;
• simple technology for constructing buildings of different heights.

This building material does not support fire. Mold and mildew do not grow on brick, so it is not required to be treated with special antiseptics. Such buildings do not rot, these baths retain heat for a long time.

Disadvantages of brick baths:

• high cost of material;
• construction requires a solid foundation;
• the need for interior decoration;
• It takes a long time to build a brick bathhouse.

The brick takes a long time to heat up, such a bath will have to be heated in advance or it is necessary to think through the system internal thermal insulation, which is another costly job. If you have access to cheap material, and also want to build a complex architectural design, the construction of a brick bathhouse is justified. In any other case it does not seem appropriate.

Aerated concrete blocks

Reviews about block baths vary. Some craftsmen recommend this alternative in construction, but many are disappointed in the final result. To decide on such a building, it is worth assessing its advantages and disadvantages.

Let's consider the advantages:

• Due to the porous structure, which is achieved by gas bubbles in concrete, the blocks have excellent thermal insulation.
• This material is accessible, cheap, and its purchase will not break the budget.
• Aerated concrete blocks are larger in size than bricks, so construction does not take much time.
• This material is strong and dense, however, it can be easily sawed.

• Aerated concrete does not emit poisonous or toxic elements when heated; it is considered an environmentally friendly building material.
• The aerated concrete walls of the bathhouse will not rot, and mold will not appear on the surface and base.
• These blocks are lightweight, making them easy to work with alone.
• Due to the lightness of the material, a reinforced foundation is not required.

It also has disadvantages:

• Due to the porous structure of the material, the blocks absorb a large number of moisture and then take a long time to dry.
• To dry an aerated concrete bath, you need additional windows, even in a steam room this inevitably leads to heat loss.
• This material is not considered breathable, so the inside of such a bathhouse may be less comfortable than in the chopped variety.
• This requires interior and exterior finishing.

Waterproofing is required inside, but the sealant composition in most cases contains chemical elements, which can become volatile and poisonous when exposed to extreme heat.

Considering such subtleties, It is better to build a spacious bathhouse 6x6 m from a material more suitable for this purpose. Aerated concrete blocks Since they are a relatively young material, it is difficult to fully assess the performance of such baths and their durability.

Projects

The construction of any bathhouse should begin with a plan. There are many options for how to organize a partition diagram in a 6x6 m bath. To draw a drawing diagram, you should decide on architectural style and desired fullness.

There is a list of premises that must be included in the layout, these are:

• restroom;
• steam room;
• washing room

If you manage the space correctly, you can include other rooms that will expand the functionality.

One-story

This is the simplest project to standard set premises it may include a terrace or terrace and a bathroom. For the convenience of changing clothes, the building can be equipped with an entrance hall or a closed veranda. You can expand the space inside by abandoning the terrace in favor of a small porch.

For a one-story building, a hip roof is perfect hipped roof . The process of installing such a roof is not very simple, but it will perfectly withstand a large mass of snow, is resistant to strong and hurricane winds, and looks good. The building will not be high, thus it will not clutter up the site.

With attic or second floor

Get additional area It’s possible if you manage the space under the roof wisely. On the attic floor you can place one or two guest rooms, open space for pool table, large plasma TV and comfortable armchairs and sofas. The presence of sleeping places expands the functionality of the building, allows you to accommodate guests, and if the main residential building is still under construction, the bathhouse can become a temporary home for the owners. Two-story bath houses are not uncommon today.

Taking these parameters into account, you can plan a convenient building for these purposes, which will include the following premises:

• on the 1st floor: entrance hall, toilet with shower, rest room (combined with kitchen, including stove and sink), steam room.
• on the 2nd floor: large bedroom, hall, dressing room.

To save space, a spiral or corner staircase can lead to the second floor. For attic floor gable is better suited sloping roof. For a two-story building, a hip roof is preferable.

Additional rooms or objects in the baths can be:

• pool;
• font;
• balcony;
• pantry;
• fireplace in the recreation room.

Living outside the city in your own home has a number of undeniable advantages: dust-free air, no noise. An important role is played by the arrangement of a bathhouse on the site, because it is an additional source of comfort.

Peculiarities

Optimal sizes Such structures are usually 6x6 meters in size. In such an area you can easily place the most necessary things. A bathhouse area of ​​6x6 meters can be called the ideal format for a bathhouse. Such parameters allow you to arrange everything necessary premises, supply the necessary furniture, as well as heating equipment. These room sizes provide good rest 8–10 people at the same time.

The construction of an object begins with determining the location where the structure will be located.

The bathhouse includes the following premises:

• steam room;
• shower room;
• bathroom;
• dressing room;
• restroom.

The most commonly used material is wood, timber or logs.

When drawing up a project, be sure to take into account that the interior space is always smaller than the area of ​​the building along the outer contour. Most often, the bathhouse is adjacent to the main house.

Material selection

The following materials are also used during construction:

• stone;
• brick;
• shell rock;
• cinder blocks;
• foam concrete;
• aerated concrete.

Logs or beams are used with a diameter of 25–35 cm, which are chopped “into a cup”. Inner dimensions the premises will be about 30 square meters, which is quite enough to accommodate all the necessary premises and even make closed veranda. The easiest and cheapest way is to make a foundation for a bathhouse on screw piles. The frame of the object, made of timber or logs, is placed on them. Pile foundation In terms of strength, it is in no way inferior to a strip base; its advantages are as follows:

• economic expediency;
• simplicity;
• durability;
• does not require much time for shrinkage.

You can build a bathhouse by making a frame from a log frame or a box from stone blocks. Interior should only be finished with wood that is not impregnated with any primers or varnishes. Wood in this case is ideal material and it is almost impossible to find a replacement for it. Its main advantages are the following:

• does not emit any harmful substances;
• has ideal thermal conductivity;
• has the required expansion coefficient.

In steam rooms, wooden lining made of linden, cedar or birch is usually used. Abashi wood is in fashion now, indeed. specifications this tree is good. Abashi grows in warm countries. It does not deform under the influence high temperatures. Cladding from of this material makes it impossible to store heat in the room. The tree also highlights various useful material which have a positive effect on the body.

Linden is inexpensive and ideal for cladding the walls of a steam room. The material does not deform from high temperatures and excess humidity.

Cedar is also a valuable material and is well suited for cladding a steam room or relaxation room. During operation, the tree releases resins over a long period of time, which have a beneficial effect on the human body. The smell of cedar is pleasant, but there is only one danger: the resin can be released abundantly and its temperature can be hundreds of degrees Celsius, which can lead to burns on the skin.

The most commonly used insulation material is technical wool, which is reliably laid with waterproofing. This material is environmentally friendly, is not affected by the environment, mold or mildew does not grow on it, and it is not included in the diet of rodents.

Aspen is the most cheap material. In terms of thermal conductivity, aspen is inferior to cedar or abashi. If the wall is covered with aspen, then this is not the worst option. The floor is made of tiles or boards; the service life of a plank floor is noticeably lower. At wooden covering tongue and groove boards are often used.

Subtleties of design

When drawing up a project plan, you need to remember the essential details. The layout is divided into several areas, the options may be different, but usually the following rooms are always available:

• steam room;
• shower;
• bathroom

The rooms are arranged according to individual project, every homeowner knows better how many people will relax at the same time, how best to plan the relaxation room and steam room. For a more rational layout of the log house, some traditional techniques are used. The stove is located near the wall, which is adjacent to corner room recreation. At the same time, one should not forget about fire safety. The combustion hole usually leads into the dressing room.

The vestibule is very important, because it allows you to save heat during the cold season, and also applies to free space.

When developing a diagram of a 6x6 meter bathhouse, the following details should be taken into account:

• allowed to be done from any part of the object;
• the sewer pipe is located next to the drainage hole;
• the steam room is designed noticeably larger than the washing room;
• The pool is often made in the recreation room.

Planning an area of ​​6x6 meters for a bathhouse is not very difficult. A sink is installed in the steam room itself; The stove is made of wood or electric. Wide ones are made from timber wooden shelves, the dimensions of which are not less than fifty centimeters. The toilet should be located next to the washroom. The dressing room is traditionally designated as a utility block; firewood and coal, bath accessories are stored in it, and you can also change clothes in it.

The lounge is a place where you can have dinner and watch TV. The walls of this room are covered wooden clapboard, and sometimes stainless steel sheets with a thickness of 2–3 mm are used. Such a bath will perfectly hold optimal temperature, which will save cubic meters of firewood or coal.

The room size of 6x6 meters is more than enough to accommodate everything important elements. It is rational to heat the recreation room using a stove, which is adjacent to this room. The dressing room usually contains everything you need for a pleasant pastime - tables, chairs, kitchen cabinets, fireplace. There is often also a kitchen with a refrigerator, gas stove and microwave.

When developing a project, it is important to consider the number of people who will usually be in the room. For a 6x6 meter format, you can count on 8-10 people. The basic figure is taken as follows: one person can occupy about 1.15 usable space square meter. Knowing this coefficient, it is easy to calculate the project and rational location useful areas various rooms.

Often a double-glazed window is installed in the rest room. It improves air exchange.

It is impossible not to mention a room whose importance is difficult to overestimate – the washing room. Typically, water is heated using a water heater that is in close contact with the stove. A shower stall is also often placed in the washing room.

Factors that influence the layout of the bathhouse premises are the following:

• stove size and its functional features;
• the space between the stove and objects in the room;
• total number of vacationers;
• amount of furniture and equipment;
• door sizes and which way they open;
• parameters of wooden shelves.

Two-story

The bathhouse can also be made on two floors. Its roof can be anything. Such objects are often made with tower-shaped or hip roofs, which look quite original on the site. On the second floor there are rooms for overnight stays, and a terrace can also be placed there.

Single-story

Having a veranda is important point in the bathhouse industry. A veranda can be a good place for vacationers to gather during the warm or even cold seasons. The walls of the terrace can be insulated and placed in the window openings double glazing. In the summer, a terrace on the ground floor can effectively protect from rain.

With attic

The second floor can be made in the form of an attic. It is not difficult to build such a structure with your own hands. An attic is actually an attic that is adapted for useful purposes.

The construction of an attic is economically beneficial; it simultaneously acts as a roof and is a room.

Construction stages

Construction stages are divided into the following phases:

• construction of the foundation;
• frame installation;
• roof construction;
• interior decoration.

Until recently, two-story bathhouses made of timber were considered a luxury and only wealthy people could afford them. Now such projects have become commonplace. This is due to the fact that profiled timber is used for construction, which is characterized by an affordable price.

Who most often chooses two-story bathhouse projects?

First of all, these are people who need a large living space. In such buildings, the first floor is allocated for a steam room, a washroom and a relaxation room. On the top floor there are common rooms. Usually these are bedrooms, guest rooms or children's rooms.

Thus, clients actually receive a second home, adapted for living no worse than the main cottage.

Also, a large two-level building is necessary if it is planned to be used for permanent use. The bath house is easy to adapt for permanent residence. The result is a building that can be used in any weather and at any temperature.

Advantages of large two-story baths

• Additional living space.

Not a single owner will refuse 2-3 additional rooms. They are never superfluous and will always find uses. Often on upper level the baths create rooms that would never exist in the main cottage.

If desired, such rooms can be insulated and used all year round regardless of the weather and other natural factors.

• Reasonable price.

A one-story building will not be much cheaper than a two-story structure. According to calculations by employees of the company SK Domostroy, it turns out that the difference between these two projects is 15-20%. This is a completely justified increase in price, since the money spent will more than pay off additional meters living space.

• A pleasant stay is essential.

A modern two-story bathhouse perfectly complements the main cottage. Together they look harmonious and complement each other perfectly. If the customer has a large family or likes to receive guests, then extra rooms there will always be correct application. And if you plan to live outside the city throughout the year, then a bathhouse is required to be built.

An excellent option for a steam room on a small summer cottage or near a private house there will be a 2nd floor bathhouse made of timber. Eco-friendly construction material suitable for any region of the country. A fairly compact building is being erected in short terms and has an impressive appearance.

Building material for the first floor

1. Advantage is given coniferous species. The choice is based on the natural properties of such wood

• dense plexus of fibers;
• sufficient degree natural humidity;
• the presence of resin that preserves the wood from drying out and rotting;
• pleasant aroma such a composite.

2. The logs are dried under natural conditions, which prevents the material from cracking.

3. The formed beams are polished and impregnated with antiseptics. Such solutions penetrate into the material, killing possible bacteria and preventing new harmful formations. The composition used for processing is non-toxic, which guarantees the absence of harmful fumes during turnkey construction in the Moscow region and during further operation.

4. Additional coverage protective layer varnish makes the building material resistant to a humid environment, which prevents rotting or mold on the walls of the bathhouse.

Wooden beam It is lightweight, which significantly speeds up the work process on the construction site. The team will not need expensive equipment or special equipment, which significantly reduces the estimated costs. The timber has profiled edges that are perfectly “adjusted” during the process of laying out the walls. The advantage of this construction is the absence of gaps in load-bearing structures and partitions.

Construction of the second floor

To reduce the pressure on the foundation and reduce the cost of construction, the company’s engineers have developed projects with frame superstructures, which allow you to buy an inexpensive two-story structure in a custom design. The second floor, built using the frame method, does not exert strong pressure on the ceiling and the foundation itself. This eliminates soil subsidence and deformation of load-bearing walls.

The advantage will be a lightweight base that does not require much time and material costs:

• a shallow strip foundation is often used;
• screw piles allow construction on any soil;
• settles in quickly pile foundation made of bricks or foam blocks.

For the frame, treated larch, linden, and aspen boards are used. The material has a very dense fiber structure and minimally absorbs moisture. The last condition is important factor for the construction of a bath. Walls must be waterproofed two-story bathhouse Full construction. The price from the manufacturer for such work will differ favorably, since the organization purchases building materials using discount cards.

The cost of building a log bathhouse 6x6 without finishing under the roof is 385,000 rubles

• The foundation is support-column. 2 blocks per cabinet (for one-story houses) and 4 blocks in a cabinet per cement screed(for houses with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
• External walls - profiled timber of natural humidity with a section of 145x90 mm (wall thickness - 90mm) "block house" profile or straight.
• Total in the log house one-story baths– 16 crowns. There are 17 crowns in the log house of the baths with the attic.
• An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm. Steps at the entrance.
• The clear ceiling height of the first floor (from the floor joist to the floor beam) for one-story baths is 2.15 m (+/-50mm); for baths with an attic 2.29 m (+/- 50 mm)
• The second floor is attic. Clear attic ceiling height (from floor beam to ceiling beam) – 2.25 m
• The height of the roof at the ridge for one-story baths is 1.20 m.
• The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. Exterior decoration gables - lining (spruce/pine AB) 17*90 mm. Wind protection – NANOIZOL “A” (for buildings with an attic).
• In the gables of one-story buildings, a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
• In the gables of buildings with an attic, ventilation hatches are installed (3 pieces for each gable).
• Eaves and roof overhangs with a width of 200 mm (for one-story buildings) and 300 mm (for buildings with an attic). The cornices and overhangs are hemmed with clapboard (spruce/pine AB) 17*90 mm.
• Installation of window and doorways with a dressing crown, without installing casing bars.
• Assembly of a house/bath on the customer's site.

The price of a turnkey 6x6 bathhouse with a foundation and stove is 588,000 rubles

• The foundation is columnar. 2 blocks per cabinet (for one-story baths) and 4 blocks per cabinet on a cement screed (for baths with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
• Waterproofing – roofing felt in one layer.
• The strapping is a beam of natural humidity with a cross-section of 150x100 mm. Along the outer perimeter the strapping is laid in two rows. The timber is processed protective composition.
• Floor joists - natural moisture board with a section of 40x150 mm per edge, with a pitch of 600 mm.
• The subfloor is a natural moisture board with a cross-section of 22x100mm. Steam, waterproofing – NANOIZOL S.
• Floor insulation – 100mm KNAUF/URSA mineral wool (or equivalent). Vapor barrier – NANOIZOL V.
• The finished floor of the first floor is dry tongue and groove batten(spruce/pine AB) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
• External walls - profiled timber of natural humidity with a section of 145x90 mm (wall thickness - 90mm) "block house" profile or straight. A total of 16 crowns (for one-story baths) and 17 crowns (for baths with an attic).
• The partitions of the first floor are profiled timber of natural humidity with a section of 145x90 mm, straight profile. They cut into external walls with a depth of up to 30mm.
• Intercrown insulation– jute fabric 6mm thick
• Inter-crown connection - on a metal dowel (construction nail 6x200mm, 250mm).
• Gusset- “half a tree.” The outer corners of the log house are covered with clapboard (spruce/pine AB) 17*90 mm in two rows.
• An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm filled with carved balusters. Steps at the entrance.
• The terrace floors are dry tongue-and-groove floorboards (spruce/pine AB) 36mm thick. They are attached with self-tapping screws to each board. The boards are laid in 5 mm increments.
• The terrace ceilings are lining (spruce/pine AB) 17*90 mm. Vapor barrier – NANOIZOL V.
• The clear ceiling height of the first floor (from floor to ceiling) is 2.10 m (+/- 50mm) for one-story bathhouses and 2.25 m (+/- 50mm) for bathhouses with an attic.
• The ceiling lining of the first floor (except for the steam room) is lining (spruce/pine AB) 12.8*88 mm. (joint for layout is allowed)
• The second floor is attic. Clear attic ceiling height (from floor to ceiling) – 2.20m
• Floor insulation – 100mm mineral wool KNAUF/URSA (or equivalent). Vapor barrier NANOIZOL V.
• The attic floors are dry tongue-and-groove floorboards (spruce/pine AB) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
• The cladding of the walls and ceiling of the attic is lining (spruce/pine AB) 12.5*88 mm (a joint for layout is allowed).
• Insulation of attic walls - 100mm basalt mats ROCKWOOL (or equivalent). Vapor barrier – NANOIZOL V.
• The attic partitions are a frame made of natural moisture timber with a cross-section of 40*75 mm, sheathed on both sides with clapboard (spruce/pine AB) 12.5*88 mm. The partitions are not insulated.
• Rafters - trusses made of natural moisture boards with a section of 150x40mm, 100x40mm. Installed in increments of 900-1000 mm.
• The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. The external finishing of the gables is lining (spruce/pine AB) 17*90 mm. . Wind, moisture protection – NANOIZOL “A” (for baths with an attic).
• In the gables of one-story baths, a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
• Ventilation hatches are installed in the gables of bathhouses with an attic (3 pieces for each gable).
• The sheathing is a board of natural moisture with a cross-section of 22*100 mm, with a pitch of 300 mm. Counter-lattice - 20*40 mm slats, along the rafter slopes.
• Roof covering – ONDULIN (burgundy, brown, green) or galvanized corrugated sheeting. Under-roof vapor barrier – NANOIZOL S.
• Eaves and roof overhangs are 200 mm wide (for one-story baths) and 300 mm (for baths with an attic). The cornices and overhangs are hemmed with clapboard (spruce/pine AB) 17*90 mm.
• The staircase to the attic is single-flight, on strings made of planed timber with a cross-section of 145*90 mm. Floorboard steps. The handrail and fencing in the attic are planed timber with a cross-section of 40*100 mm.
• Finishing the walls and ceiling of the steam room - lining (aspen B) 14*90 mm (joint for layout is allowed). Reflective insulation on a foil base - NANOIZOL FB. Counter rail – 10*40 mm (ventilation gap – 10 mm). Before covering, the timber base of the walls is treated with a protective composition for baths and saunas NEOMID 200.
• Two-tier shelf made of planed boards (aspen B) 28*90 mm. Joint width – 40 cm (height – 50 cm); Lounger width – 60 cm (height – 110 cm).
• Installation of the ERMAK 12/ERMAK 16 s furnace hinged tank(stainless steel 35 l) for heating water.
• The base of the stove is brick in one row. Cutting the combustion portal - brick.
• Fire insulation - basalt cardboard, ceiling and roof passages, reflective screen made of smooth galvanized steel on basalt cardboard, flue sheet.
• The chimney is vertical, with an outlet into the roof through the ceiling. Starting pipe - stainless steel 0.5 mm, stainless steel gate valve, stainless steel starting adapter, sandwich pipes 115 * 200 mm (stainless steel 0.5 mm * galvanized 0.5 mm), galvanized head.
• Installation in a washing room shower tray 800*800 mm with siphon. The drainage outlet beyond the perimeter of the bathhouse is a plumbing PVC pipe with a diameter of 50 mm.
• The windows are wooden, double glazed, with sealing and fittings (screw-in hinges, twist locks). Inward opening doors. Dimensions (h*w) 1200*1500 mm; 1200*1000 m; 1200*600 mm; 600*600 mm; 400*400 mm. Windows are installed in casing boxes.
• The entrance door is wooden, paneled, solid (spruce/pine A). Size (h*w) 1800*800 mm (for one-story baths; 2000*800 mm (for baths with an attic). Handles, hinges. On front door a padlock is installed.
• Interior doors – bath, frame (aspen A). Size (h*w) 1750*750 mm. Handles, hinges.
• In window and doorways casing bars (swarms) are installed.
• Sealing of corners, joints, abutments - spruce/pine A/aspen AB plinth.
• Finishing windows, doors - spruce/pine frame A on both sides, aspen AB
• Nails for fastening parts are black construction nails.
• Nails for fastening the lining – galvanized 2.5x50 mm
• Nails for fastening plinths, layouts - finishing galvanized 1.8x50 mm.
• Loading, delivery up to 400 km from Pestovo, Novgorod region, unloading of a set of material.
• Assembly of the bathhouse at the customer's site.
• BONUS. Accessories for the steam room. Stones – gabbro-diabase 40 kg.

We have compiled for you a convenient table of differences in the configurations of bathhouses for shrinkage and turnkey.

CONSTRUCTIVE	SHRINKABLE	FULL CONSTRUCTION
Columnar foundation made of concrete blocks 200*200*400	Yes	Yes
Double strapping made of timber 150*100 mm	Yes	Yes
Floor joists made of boards 40*150 per edge with a pitch of 600 mm	Yes	Yes
Subfloor made of boards 22*100/150 mm	No	Yes
Floor insulation with hydro and vapor barrier	No	Yes
Finish floor – dry tongue-and-groove floorboard 36 mm	No	Yes
Walls and partitions made of profiled timber of natural moisture with a cross-section of 145*90 mm (wall thickness – 90mm)	Yes	Yes
Assembling a log house on steel dowels	Yes	Yes
Corner connection - half a tree	Yes	Yes
Intercrown insulation - jute	Yes	Yes
Rafters - trusses made of timber 40*100/150 mm with a pitch of 900/1000 mm	Yes	Yes
Sheathing – board 20*100/150 mm	Yes	Yes
Roof covering– ondulin / galvanized corrugated sheet C20	Yes	Yes
The eaves and roof overhangs are lined with spruce/pine AB clapboard	Yes	Yes
Window and door openings with a dressing crown, without installing casing bars	Yes	No
Window and door openings with installation of casing bars	No	Yes
Installation of windows and doors	No	Yes
Ceiling lining – spruce/pine lining AB	No	Yes
Insulation + vapor barrier of floors/attics	No	Yes
Finishing the walls and ceiling of the attic - spruce/pine lining AB	No	Yes
Finishing the walls and ceiling of the steam room - aspen lining AB + shelves	No	Yes
Installation of stove and chimney	No	Yes
Installation of a shower tray 800*800 mm with a siphon in a washing room. Exiting the drain outside the perimeter of the bathhouse	No	Yes
Stairs to the attic	No	Yes
Finishing: plinth, platbands	No	Yes
Loading a set of material, delivering it up to 400 km from our base, unloading at the customer’s site	Yes	Yes

Name	Cost, rub)	Unit
Construction of foundations on screw piles or reinforced concrete foundations	8-921-930-69-80, 8-926-742-95-01
Decorative finishing plinth - pick-up ()	1000-1600	linear meters
Installation of reinforced concrete slabs 500*500*100 mm for support pedestals ( )		PC.
Protection (backing board) of the first row of strapping made of larch boards 50*150 mm ( )		linear meters
Protection (backing board) of the first row of strapping made of larch boards 50*200 mm ( )		linear meters
Double strapping made of timber 150x150mm		linear meters
Double strapping made of timber 150x200mm		linear meters
Installation of floor joists made of timber 150x100mm		linear meters
Installation of larch floors decking boards"corduroy" (for open terraces)()	2000	m*2 floors
Installation of finished floors from tongue-and-groove larch floorboards 27 mm ( )	2000	m*2 floors
External walls made of profiled timber are moisture resistant with a cross-section of 145x140mm, partitions are made of profiled timber. humidity section 145*90 mm	2500	linear meters external walls
External walls and partitions made of profiled timber chamber drying section 145x90 mm	2300	linear meters external walls And partitions
External walls made of profiled kiln-drying timber with a cross-section of 145x140 mm, partitions made of profiled kiln-dried timber with a cross-section of 145x90 mm	4000	linear meters of external walls
The outer walls are made of profiled timber. humidity with a cross section of 145x190mm, partitions made of profiled timber. humidity section 145*90 mm	4500	linear meters of external walls
External walls are made of profiled chamber-drying timber with a cross-section of 145x190 mm, partitions are made of profiled chamber-drying timber with a cross-section of 145*90 mm.	5300	linear meters of external walls
Set of kiln-dried lumber ( )	1000	m*2 building area
Pairing crowns with a wooden dowel	1000
Assembling a log house using a SPRING UNIT FORCE ( )	2000	linear meters external walls and partitions of the log house
Assembling a log house with the height of the crowns tied with steel studs	1500	linear meters external walls and partitions of the log house
Corner groove-tenon connection ( warm corner)	6000	one corner of the log house
Corner connection “into the bowl” ( )	from 30 000	house kit
Inter-crown insulation – holofiber()	300/450/600	linear meter external walls of the log house
Increase in ceiling height by 14cm (+ one crown in the log house)	500/750/1000	linear meters external walls and log partitions
Insulation 150mm		m*2 insulated area
The construction of a staircase on strings made of laminated veneer lumber, with wide steps, turned pillars, balusters and a figured handrail.	25000	PC.
Roof covering – metal tiles RAL 3005,5005,6005,7004, 7024,8017)		m*2 roof
Roof covering – corrugated sheeting with polymer coating (RAL 3005,5005,6005,7004, 7024,8017)		m*2 roof
Installation of a drainage system (PVC, DEKE)	1200	linear meters roof slope
Installation of corner snow barriers ( )		linear meters roof slope
Construction of tubular snow barriers ( )	1300	linear meters roof slope
Attic structure: sparse flooring made of edged boards By ceiling beams, door in one of the gables + dormer window in the opposite gable		m*2 ceiling
External finishing of gables – house block spruce/pine AB 28*140		m*2 gable area
External finishing of gables - imitation timber 18*140 mm		m*2 gable area
Treatment of the entire building with fire-bioprotective composition NEOMID ( )		m*2 building area
Surface treatment with oil for terraces NEOMID ( )		m*2 floors
Treating the walls and ceiling of the steam room and washing room with NEOMID varnish “for baths and saunas” ( )		m*2 walls and ceiling
Treatment of the ends of the log house with NEOMID TOR PLUS ( )		opening/corner
Treatment of shelves in the steam room with NEOMID oil ( )	1000	m*2 shelf
Finishing walls and ceilings with washing lining made of larch 14*90mm ( )	1500	m*2 walls and ceiling
Installation of a “leaky floor” in a washing room ( )	5000	m*2 floors
Finishing with paired lining OSIN A, including shelves - OSIN A		m*2 walls and ceiling
Finishing with paired lining LIPA A, including shelves - LIPA A	1200	m*2 walls and ceiling
Finishing with paired lining LIPA EXTRA, including shelves - LIPA Extra more details more details)	35 000	PC.
Installation of PVC windows with single-chamber double-glazed windows	from 4000	PC.
Installation of PVC windows with double-glazed windows	from 5000	PC.
Installation of a heat exchanger in the ERMAK furnace, installation of a remote tank (stainless steel 60 l) on the wall of the washing room, water supply hot water metal-plastic pipes	20000	PC.
Installation of a tank (stainless steel 50 l) on a pipe above the stove, with a tap leading to the washing room	13 000	PC.
Installation of another ERMAK furnace (	12 000/16000	set
Chimney device from of stainless steel 0.8 mm thick (included) protective screen, stainless steel flood sheet)	16 000/20000	set
Delivery over 400 km from Pestovo, Novgorod region.		km
Construction shed 2.0*3.0 / 4.0 m ()	from 21 000	PC.

The whole country rests on such workers

Alexey Gennadievich!!! Due to lack of time, I couldn’t write to you - thank you very much for the work of your employees in building the bathhouse, two young men, unfortunately, I don’t know their names, they worked clearly and harmoniously, the quality of the bathhouse is EXCELLENT!!! The whole country rests on such workers. All our friends and relatives also noted the impeccable work of the guys, which resulted in the bathhouse we dreamed of.

The guys built us an amazing bathhouse

I would like to express my deep gratitude to Alexey (general director), Sergey Zorin and Vladimir Chistyakov (builders)! At the beginning of August, the guys built us a stunning bathhouse, taking into account all our wishes. The delivery of materials was carried out on time, the construction was completed even ahead of the previously agreed time, the quality of materials and work is at the highest level. In general, just a fairy tale! I advise you to build only with Russian carpenters!

"Price quality"

The work is pleasing to the eye. Fast, high quality, on time. I thank the team of guys (Evgeny, Dmitry, Sergey) and general director Alexey Roslov for the work done. I ordered a bathhouse with a 6x6 attic, project B-20, with minor changes, “for shrinkage”. All work has been completed ahead of schedule and high quality. All my wishes were taken into account. I was very pleased with Alexey Roslov’s attitude towards his work. He always promptly and competently answered all my questions and resolved controversial issues. The team, despite the young age of the guys, worked quickly and smoothly, and at the end they gave advice on caring for the timber and preserving it for the winter. IN next year I will do the finishing with the same team. "Russian Carpenters" wins in all respects compared to other large companies. “Price-quality” is about them. Again Thanks a lot. I will recommend it to everyone.