What material are children's wigwams made from? How to sew a wigwam for children with your own hands

You will need

● Colored and plain thick cotton fabric
● Ribbons or bias tapes
● Volumenfliz for the base and fleecefix for applications (read tips on working with gaskets in)
● Three wooden sticks with a diameter of approx. 2 cm, length approx. 2 m
● Suitable sewing threads
● Pins ()
● Scissors ()
● Tailor's chalk ()
● Measuring tape ()
● Triangle
● Film ()
● Film marker ()

Description of work

Step 1: make patterns

For the base, draw an equilateral triangle on the film with a side length of 120 cm. For the walls of the tent, draw an equilateral triangle on the film, 120 cm wide and 180 cm high. Cut out the parts from the film.

Step 2: cut out the parts for the base

Pin the film parts onto the fabric. Add 1.5cm seam allowances on all sides.
● Cut the base from fabric 2 times and from volumenfleece 1 time.
● From the fabric for fixing the poles - see photo below left - cut out 3 squares measuring approx. 10 x 10 cm, fold them diagonally.
● Cut out 4 strips for the tie, approx. 15 cm and 8 cm wide, finished 3 cm wide.
● Cut out 3 bias tapes for edging the entrance to the wigwam.

Step 3: Sew the Base

Sew the ties cleanly, leaving one end open.
Tissue the base cleanly, while grabbing woolenfleece, squares folded diagonally and 2 ribbon ties.

Step 4: Sew the walls of the wigwam

Cut out 3 sides (the walls of the wigwam). Sew pockets on both sides; if desired, stitch or stick appliqués on the pockets before sewing. You can also decorate the walls of the wigwam with appliqués, for example, as described in
On the front side of the wigwam, make two cuts from the bottom edge at an angle so that the entrance can then be rolled up (see photo of the model). Sew the sections cleanly using bias tape as described in the master class on the basics of patchwork. Sew ties on both sides of the entrance (see photo of the model).

Step 5: stitch the walls and edge the entrance

Sew the three walls of the wigwam, leaving a hole at the top for sticks, and place the parts face to face. Fold the allowances under and stitch along the seam, or make a French seam. Finish the top and bottom edges cleanly using bias tape.

Step 6: Assemble the wigwam

Insert the sticks one at a time into the corners of the base and tie them tightly with ribbon at the top. At the bottom of the stick, additionally secure it with ribbons. Place the walls of the wigwam on sticks and, if desired, additionally secure them with ties.

Children love all sorts of houses and secluded places where they can play with friends or read interesting books. An excellent solution is a wigwam, which you can buy or sew yourself. Eat simple options original houses and more complex ones, requiring certain knowledge and sewing skills. If you wish, you can turn your favorite thing into an excellent business idea. To make good money making colorful huts, you must follow some rules. But first, it’s worth figuring out how to sew a wigwam for children with your own hands.

Our business assessment:

Starting investments - from 50,000 rubles.

Market saturation is low.

The difficulty of starting a business is 2/10.

What is a children's wigwam?

Parents often buy a wigwam playhouse for their child, which is made in the shape of an Indian dwelling. The design is characterized by simple assembly, original configuration and mobility. Product diagrams can be found on the Internet. Special meaning has quality workmanship and the use of natural materials.

Children's wigwams can be different and have various designs. For example, designs with and without windows, with pillows and curtains. For boys, a children's wigwam tent can be in brown, blue or green color palette. And for girls, the product is distinguished by more delicate tones and is complemented by ruffles.

The wigwam is very easy to install and takes up little space. When not needed, it can be collected and stored in the pantry. Interesting huts are great for very young children and older children.

Business idea for creating wigwams

To create a small business out of sewing wigwams, you need to understand not only the nuances of their manufacture, but also financial side. The approximate investment for the production of one product will be 1200-5500 rubles. Profitability, depending on quality, will be 30-60%. Return on investment is possible within a month. If you create your own online store selling wigwams for children, then you need to think about hiring staff.

Nuances of starting a business

To start a business, it is important to master the sewing of a wigwam. To make it you will need a few materials: natural fabric, a wooden pole and 4 slats. The best wood for this kind of product - spruce or linden. Materials must be natural and double-sided. You will also need a wigwam pattern. The house must be stable, especially if it is intended for small children.

An original hut can become a real decoration of a room if you use additional decor. These can be balls, garlands and ruffles. You can make exclusive embroidery with the child's name.

In order for there to be a demand for homemade wigwams, you need to make some efforts:

Develop interesting projects houses. Products must be exclusive.
Find suitable premises for the workshop and select personnel.
Find ways of inexpensive and effective advertising.
Establish contacts with suppliers who provide quality fabrics and accessories.

The price of a wigwam for children that can be offered depends on the quality of the products and the originality of the approach.

Business income

If you have certain skills and craftsmanship, you can make a beautiful wigwam in a day. Costs are determined by the quality of the material, type of decor and design features. The most minimum investment amount to 1000-1500 rubles. You can buy an inexpensive children's wigwam for 2500-3000 rubles. First, you can try selling homemade products to friends and acquaintances. This can be done through social media. networks. If the products are of high quality and unusual, you will be able to make a good profit.

To earn more, you need to diversify your range with children’s tents or different play areas.

How to sew a wigwam?

First you need to master the technology and learn more about how to make a wigwam for children. In this case you will need special tools and materials.

For the frame you should prepare:

6 bars, the length of which is about two meters, and the thickness is from 3 to 4 cm. You can also choose bamboo sticks;
Rope of special strength;
drill and drill;
good rubber band.

To make an awning you will need:

a piece of natural fabric (linen or cotton) with a length of up to three meters and a width of 1.3-1.5 meters. The material must be dense;
6 strips of fabric. You can take ribbons, ribbons or cords up to 30 cm long;
threads to match the fabric and needle;
to finish the edges, you can take self-adhesive tape or thread and a sewing machine;
To make a door you will need lace or other accessories - rivets and buttons. Eyelets of small diameter.

You will also need a pencil and pins. Step-by-step instruction includes the following steps.

Step 1

Done frame element. It can be done in different ways.

All bars are collected together and tied with an elastic band. In this case, you need to retreat 10-25 cm from the top. The poles are widely spaced on the sides. The wigwam diagram clearly demonstrates how this can be done. The elements must be at the same distance. In this case, a wider space should be left for the door. The frame must be firmly installed.

There is another way. A through hole is drilled in each stick using a drill. In this case, you need to step back 10-25 cm from the top edge. Then the poles are tied together. Then the elements are spread apart to form a cone. The top should be wrapped with rope.

Step 2

Then you need to make a wigwam canopy. To do this, you need to clarify the size of the wigwam. The fabric is laid out on the floor in the form of a square with sides of 1.5 meters. The fold line should be placed on the left side of the square. The square is connected diagonally. In this case, you need to add two opposite corners to form a triangle.

Step 3

Cutting is being done. First, the markup is drawn. In this case, an arc is drawn from the fold line to one of the sides. Then a second arc with a diameter of approximately 8 cm is drawn. Cutting is carried out according to the markings. The fabric can then be spread out on the floor. This should create an awning in the shape of a rainbow.

Step 4

The frame is wrapped in fabric with the inside out. The ends need to be fastened with pins. The fabric must be marked where it comes into contact with the bars at a height of 22-25 cm from the floor.

Step 5

The material is removed from the frame part. Pieces of twine or tape are sewn in place of the markings.

Step 6

All fabric sections must be carefully processed. To do this, the edges are folded twice and stitched manually or at sewing machine. You can also glue them using a special tape.

Step 7

To complete the sewing, you need to think about how the edges of the awning will be fastened. You can use eyelets that lace up. Buttons, ribbons or even snaps will do.

Step 8

The wigwam is covered with an awning. Its upper part should be fastened and the doors should be rolled back. They are secured with ribbons or Velcro. A blanket or rug is laid inside, and beautiful pillows can be placed. You can put flags on the sticks, and decorate the canvas with tassels, LED garland and pom-poms.

Such an unusual hut can be placed in the yard or on the playground, and brought into the house at night. If the awning gets dirty, it can be easily washed.

How to make a wigwam exclusive?

To make the design original and unique, you can apply different design ideas. When choosing fabric, you should give preference to two options that will combine beautifully with each other. Houses with removable covers that can be removed and cleaned are especially convenient.

The frame can be made from different quantities chopsticks This depends on the future configuration of the product.

The design can be supplemented with flags and a window or you can play with the color composition. The black and white solution looks unusual. The option for princesses can be made not only in pink, but also in yellow or lilac color scheme. The option with garlands looks magical. To create a product in a marine style, you should choose the appropriate textiles.

Every child wants to have his own cozy corner in which he will feel like a master. Gone are the days when such a house was made from chairs and a blanket. Modern children can play comfortably in a cozy wigwam. This design is a fabric house, similar to the dwelling of the Indians. This makes the game even more interesting and exciting. You can make a wigwam on your own if you prepare a pattern, materials and tools, and also decide on a design.

A wigwam for children is a symbiosis of a home hut and a tent. Children immediately fell in love with this design: it is interesting, unusual and very cozy. Parents will also appreciate this addition to the interior, because the room will immediately become much more aesthetically pleasing.

Wigwams first appeared in America and have since become very popular throughout the world. Such a house has a number of significant advantages:

practicality - the wigwam can be quickly disassembled and compactly hidden. It is also easy to wash and does not take much time;
rationality - the design develops children’s imagination and promotes the development of brain activity through role-playing games;
aesthetics - the wigwam will decorate any children's room;
originality - the owners of such a house are true connoisseurs of beauty and originality.

There are several types of children's wigwams. All of them are based on the same manufacturing principle: you need to make a frame, sew a fabric cover and think through the design. Models may differ in shape, size and design design. There are five options with photos.

wigwam classic

This model is the most common. It has a standard wigwam shape. Additionally, the design can have accessories - matching pillows, pom-poms, textile garlands, etc.

The advantage of this option is that it will suit any interior.

wigwam with windows

This model has an additional one or two windows. This will add special colors to the child’s play. You can sew beautiful curtains and attach them so that they move. Then it will be doubly interesting for the baby to spend time in his own secluded place.

Such a wigwam is made according to the same principle as classic version, only additional windows need to be cut out on the canvas.

wigwam: simplified version

When you don’t have the time or talent to make the usual wigwam, you can limit yourself to a more simplified option. On wooden frame just attaches fabric cloth and is evenly distributed, forming a wigwam.

Visually, such a model may be inferior due to its simplicity and conciseness, but its production will not take much time. This type will also be relevant for those children who quickly lose interest in new toys.

wigwam with round entrance

This design is suitable for toddlers and small children. You can get into the house through round hole. The advantage of this model is its comfort and interesting appearance. There is one significant disadvantage - over time, the child will grow up and will not be able to crawl into the wigwam.

elongated wigwam

Another interesting option wigwam. It will look especially beautiful in a children's room with high ceilings. Distinctive feature This design is that in addition to the frame, it is also attached to the ceiling using a metal chain.

Materials and tools for work

Making a wigwam can be an economical affair if you rationally calculate in advance what you need to buy. Materials and tools for work are available to everyone and can even be found at home by a novice designer.

For manufacturing you will need the following materials:

4 wooden round sticks or PVC pipes;
beautiful thick fabric to sew the cover. Preferably it should be natural;
rope or rope (you can choose a beautiful decorative one, the main thing is that it should be strong and not slip);
threads to match the material.

The only tools you will need are scissors, a drill and a sewing machine, if you have one, to sew the cover.

In addition, you will need a little imagination, inspiration and seamstress talent.

Wigwam patterns for children step by step with photos

Depending on the shape, wigwam patterns for children may vary. The design can have 5, 6, 9 shelves, but the simplest and most understandable option for implementation will be a square frame option.

To use the material efficiently, you need to correctly position the pattern pieces on the fabric. To do this, you first need to display the “walls” of the wigwam on paper.

This pattern will make 4 pieces. The side elements should be sewn to the middle, this will form the entrance to the house. The pattern implies the presence of a window and a pocket for toys and other small items. The third party will be deaf.

The next step will be making a pattern for the cover. You should start from the front side, where the entrance will be located. Then the remaining elements are gradually sewn together and supplemented with special pockets for sticks.

Product sizes may vary. The main thing is to maintain proportions and not go beyond a single idea.

Once the pattern for the cover has been drawn, it should be carefully cut out and applied to the fabric. Due to the fact that the cover has a rounded shape, it should be cut out carefully so that in the end the workpiece fits perfectly into the wooden structure.

How to sew a wigwam for children: master class

When you first start sewing a wigwam, it is important to get necessary knowledge, highlight for yourself the main points, what should be avoided, and what, on the contrary, is important not to miss.

The master class “How to sew a wigwam for children” can help with this. It will tell you in detail where to start, phased implementation work and final design touches.

You should start by preparing the materials. All of them should be at hand. The wooden sticks that will serve as the basis of the frame should be approximately 180 cm high. They can also be replaced with metal pipes.

You need to drill holes in the sticks to thread the cord through them. This way the structure will come together. It is important to place the top correctly: the ends of the sticks should form the “cap” of the wigwam and be well pulled together.

Now you need to pay attention to the bottom of the sticks. They must be at an equal distance and be stable. To achieve this, you can equip the structure below with an additional frame by connecting the wooden “legs” of the wigwam with a plank.

The next step will be creating a fabric cover. You can use a ready-made pattern or draw it yourself. The size of the wigwam parts can be different. It is important to maintain proportions to maintain aesthetic appeal.

The cover can be whole or sewn from several halves. Each part of the fabric cover should have a pocket to fit the stick through. The diameter must be suitable, otherwise the stick will not fit.

All edges need to be processed, a cut is made in the middle and an entrance is formed. “Walls” can be supplemented with a window or pocket.

Now it’s important to connect all the parts and try them on each other. A mattress or blanket should be laid on the floor inside the wigwam.

The last stage is decorating the house. Here you can give free rein to your imagination and come up with a lot of original ideas.

Video: DIY wigwam for children

The video allows you to better understand how to make a wigwam for children with your own hands. The master will be able to pay attention to important nuances, choose the appropriate technique by comparing several videos, and assess the scale of the task.

There is no shortage of videos on this issue on the Internet, so you can watch a lot of information and choose the key one for yourself.

Wigwam ideas and designs for children

There are many teepee ideas for kids. It all depends on the preferences of the child and the skills of the master who will make it. There are 5 options for original houses.

wigwam with pompom mattress

Pom pom mattresses have become very popular. It will also be very comfortable for your baby to lie on it. Such a wigwam will become a real decoration for a child's room. You can make pom-poms yourself, and then sew them together.

wigwam with lighting

For older children, it is rational to make a wigwam with lighting. Then they can read in their nook, look at pictures or draw.

hanging wigwam

This type of wigwam differs from the above. Its design is based on the fact that the frame must be suspended. So the wigwam can also become a swing. This is especially convenient when you need to rock your baby to sleep.

wigwam - princess house

This option will do only for girls. More design costs will be required, but this will be justified by the end result.

wigwam - tent

If you hide the ends of wooden sticks in a fabric cover, and make the wigwam itself into several sections, it will take the shape of a tent.

How to sew a wigwam for children with your own hands, step-by-step instructions

When starting to sew a nook for your child, it is important to follow the step-by-step instructions.

The algorithm of actions on how to sew a wigwam for children with your own hands will consist of the stages indicated below.

You need to take wooden sticks from round(4 pieces) and drill a hole in them at a distance of 30 cm from the beginning.

Thread the cord through the holes and distribute the structure evenly. It is important to pull the poles tightly and place the “legs” firmly.

Now you need to cut out the fabric cover. First you should measure the wigwam and make a pattern.

The template can be taken from the Internet or made on your own. Now you need to cut out the blanks and transfer them to the fabric.

All edges must be stitched.

How to decorate a wigwam with your own hands

Decorating a wigwam with your own hands is very simple. You can use all available materials - rhinestones, ribbons, fabric appliqué, toys, etc. The main thing is that the elements are in harmony with each other.

Can be decorated children's playhouse decorative flowers.

For boys, it is better to choose a laconic style. It will never go out of fashion, so it will be useful for future generations.

Or make a wigwam in ethnic style and decorate it appropriately.

A wigwam for a child will become a real refuge, its own cozy “nest,” its first living space. It is important that he feels comfortable in it, appearance did not fall out of the general style of the room, and the materials were natural and pleasant to the touch.

The time comes, and children, having watched enough cartoons or listened to the boastful stories of their peers, ask their parents to buy, build or construct a wigwam themselves.

Some parents and almost all grandparents, during their pioneer childhood, did not even know about this name, but they were well aware of the hut, which could be built from any available materials - from spruce spruce branches to a bedspread. In order not to get confused in terminology, let us immediately define that a wigwam is a North American Indian hut, conical or pyramidal in shape, made of woven materials or a special plastic film.

The wigwam is usually placed on a country garden or personal plot, open veranda, and if there is enough free space - in the nursery. Most designs are a frame covered with fabric. If, when independently constructing an American hut, you provide for the use of a collapsible frame, then the question of the need for excess free space disappears, and after the end of the game, the entire disassembled structure can be stored on the mezzanine, balcony, or put away.

Design Features

Today there are quite a lot of wigwams on sale, differing in size, color and type of material used, intended for installation in a children's room or on outdoors. Considering that the design of this product is simple and the materials are affordable, any family will be pleased to make this piece of furniture with their own hands, involving the child in doing the chores.

To make a simple product yourself you will need:

Several thin wooden slats or pieces of bamboo sticks. For a spacious wigwam, which most accurately imitates the real home of the North American Indians, there are 9 of them.

The rods are installed at an angle of 28.0 to the vertical and tied at the top with a rope or tied with a belt. In order for the base to be sufficiently rigid and not move apart on the floor, the lower ends of the frame racks are connected to each other with the same slats.

On a note!

To cover the product, you can use separate pieces of textiles or sew a special cover. The pattern for the case can be found on special websites or forums on the Internet. In principle, due to the simplicity of the design, you can make a pattern-template yourself, which will allow you not to tie the dimensions of the wigwam to a specific prototype, but, using maximum imagination, you can create your own, individual design.

The cover can be sewn from separate pieces of triangular-shaped fabric. Dimensions are determined very simply. The lower side of the triangle is equal to the distance between the frame rods, and the upper sides of the panel are equal to the height of the rod.

At self-tailoring you can choose material of different colors and textures, then your homemade hut will look especially decorative and attractive.

Arrangement of the entrance

It is better to cut out the entrance to the wigwam in a ready-made cover. Usually the inlet hole is made semicircular or one of the segments of the cover is made folding. For a semicircular hole, you will have to make a separate curtain, which should be larger in size than the entrance hole.

To prevent the curtain from turning into an ordinary rag, elastic wire is sewn around its perimeter. To fix the door in the closed position, Velcro can be sewn or glued to its panel.

Additional mounts

If the wigwam is intended for outdoor games, then it is necessary to provide additional fastenings of the cover to the frame rods. They are made in the form of loops sewn to the bottom edge of the cover. Rods are inserted into these loops, which will significantly improve the tension of the fabric when assembling the product and increase its resistance to wind loads. In addition, several loops should be sewn at the top of the cover.

Additional accessories

For a hut placed on a personal plot, it is necessary to provide for the arrangement of its lower part. The easiest way to solve this issue is by sewing a separate mattress, which will be located on the ground inside the frame.

Since children are active and restless, in order to prevent the mattress from bunching up, ties are sewn along its edges and tied to the frame.

Pillows of different sizes will also help, making the seat on the fabric floor more comfortable.

Frame design features

Bamboo sticks are mainly used to make the frame, wooden slats or PVC pipes. In nature, you can use dried tree branches, stalks of corn or sunflowers and the American wigwam will look more like a traditional Russian hut. For the top tie support posts you can use climbing vegetation - hop shoots, wild grapes or ivy.

Of course, huts made from natural materials, is not immediately used for children's fun. If the covering is laid from spruce branches, it should dry out a little. If parents plan to use the hut as a seasonal structure, it is advisable to sow the free space around it with lawn or cereal grass, and plant climbing plants in the immediate vicinity of the hut structure, which will renew its lining as they grow.

It’s enough just to make a hut based on a regular garden stepladder. By installing it in suitable place Parents will just have to find a suitable blanket or blanket to make a cover out of it that does not need to be cut. It is enough to simply throw the material over the stem base and secure it with ropes, wire or other auxiliary materials.

On a note!

Using wooden slats and beautiful translucent fabric, any father, with a minimum of effort, will be able to make a collapsible home hut for his baby, which will become the center of not only exciting games, but will also turn into a place for daytime rest or sleep.

Conclusion

Those parents who do not have time to cut out the material, trim the slats, and tie the frame can, as an option, be offered sold sets of wigwams, from which they, with a minimum of effort, will be able to make an entertaining house for their child. An excellent solution would be to purchase a “Leader Kids Wigwam” or “Pink Stripes” play tent, which can optionally be equipped with a quilted blanket, a garland of Thai flags, pillows and self-sewn appliqués.

Quick navigation through the article

For children, a wigwam (teepee, hut) is a secluded place in which reading books, gatherings with friends, games and sleep become much more interesting. And how stylish it looks in the interior of a nursery, living room or in the courtyard of a summer house! Today you can buy a ready-made hut in a specialized online store or from private craftsmen on Instagram. But if you have a free day and a desire to create, then it’s best to make a wigwam yourself.

There are several methods for making huts - from the simplest and not very reliable to quite labor-intensive, requiring sewing skills and a sewing machine.

We know a way to make a wigwam with your own hands, which looks cool, can open and close, is easy to wash, fold and disassemble, but... done in just a couple of hours and almost without sewing!

Master class on making a wigwam with your own hands

Today we invite you to make such a children's hut.

Materials and tools.

For the frame:

6 wooden slats from 2 to 4 cm thick and 2 m long. Instead of slats, you can take bamboo sticks - they are light, inflexible and look nice.
Twine or other strong rope.
Roulette.
Drill and drill bit (optional, but recommended).
A strong rubber band (not needed if you have a drill).

For the "awning":

A piece of cotton or linen fabric 3 m long and 1.2-1.5 m wide. It is desirable that the fabric be dense.
6 strips of fabric (cords, ribbons or ribbons) 30 cm long.
Needle and thread to match the fabric.
For finishing edges: threads to match the fabric and a sewing machine (if you have one) or self-adhesive tape with an iron. If desired, the edges may not be processed at all.
For the door: small diameter eyelets + lace or any other accessories (buttons, rivets, laces, etc.).
Pencil.
Pins.

Instructions:

Step 1: First we need to “build” the frame of the teepee. You can do this in two ways:

Method 1: Gather all the poles together and tie them tightly with an elastic band, leaving 10-25 cm from the top edge. Then space the poles wide apart with roughly equal spacing and one wider run, as shown in the diagram below. Make sure the frame is installed securely.

Method 2: In each pole, use a drill to drill through hole, retreating 10-25 cm from the top edge. Then tie the poles loosely enough to each other as shown in the following photos.

Step 2. Now let's work on the canopy of the hut. Lay the fabric on the floor and fold it in half to form a 1.5 x 1.5 meter square (see step A in the diagram). Make sure the fold line is on the left side of the square. Fold the square diagonally, connecting two opposite corners to form a triangle (see step B in the diagram).

Step 3. Let's start cutting. To do this, first draw a marking: draw an arc from the base of the triangle (fold line) to one of its sides, starting about 5 centimeters from the edge of the fabric. Next, draw a second arc with a diameter of about 8 cm at the very tip of the triangle. Cut the fabric according to the markings, and then spread it on the floor - you should get a “tent” in the shape of a rainbow.

Step 4. Wrap the frame in fabric, wrong side out, and pin the ends together. Mark where the fabric meets each pole about 20cm above the floor.

Step 5. Remove the fabric from the frame and sew ribbons or pieces of the same twine 30 cm long on the wrong side in place of the marks.

Step 6. Process all sections of fabric: fold the edges twice and stitch (by hand/using a sewing machine) or glue them using a special tape and an iron. On next photo on the left is a method for quickly processing the upper round part of the canvas.

However, this stage is not necessary if you want to make the hut artistically careless.

Step 7. Now you need to figure out how to “fasten” the edges of the awning. In our project, small eyelets were used, which were simply laced after installation. You can come up with your own way. For example, snaps, buttonholes, or ribbons work well.

Step 8. Cover the wigwam with an awning, fasten its top, and simply fold the “doors” back. If desired, they can be set aside and secured with Velcro or ribbons.

Step 9: Place a rug or blanket inside and throw in some cute pillows. Decorate the outside of the wigwam with fluffy pom-poms, yarn/paper tassels, and/or LED garland. You can put flags on the sticks. Well, that's all, the wigwam is ready!

Due to the fact that the tent is quickly assembled and stowed, it can be placed under open sky. For example, on summer cottage to hide from the sun and mosquitoes. If the awning gets dirty, you can easily remove it, wash it and hang it back on the frame.

Wigwam Decor Ideas

If you can choose almost any stick for the frame, then you should approach the choice of fabric responsibly. After all, how the wigwam will fit into the interior and how much the child will love it depends on its type. Further in the selection we presented several interesting examples huts for boys and girls.

The most versatile and win-win wigwam is made of white or beige fabric. It will not overload the interior and will be combined with any decor, and there will always be pleasant lighting inside it. True, you will have to wash a white awning a little more often than a colored one.

A white tent can be decorated with fabric paints, embroidered with appliqués, or covered with tempera stickers.