How to quickly descale a kettle without much effort. Removing scale from an enamel kettle How to descale a kettle using

It doesn’t matter what kind of kettle you have at home - electric, enameled or metal, you cannot avoid scale in it under any circumstances. Even expensive water filters will not save you. Electric kettles quickly break down due to scale, and at the bottom of ordinary kettles - metal or enameled - an explosive mixture of scale and rust forms.

In the struggle for health, for the ideal taste of tea and coffee, the most important thing is the quality of water. Lime in a kettle can easily ruin any drink and your health.

Scale is formed due to the content of metal salts in tap water, which settle on the bottom and inner walls of ordinary kettles or electric heating elements.

Ignoring the scale problem is extremely dangerous.

Firstly, it causes premature failure of electric kettles and destruction of the walls of ordinary ones. Scale has a very small heat dissipation, which leads to overheating of the surface of the kettle. It prevents water from contacting the highly conductive steel, thereby heating the steel to unacceptable temperatures. In electric kettles, the heating element is made of steel, and as a result of the appearance of scale, it experiences strong thermal resistance, which leads to breakdown.

Secondly, when scale gets into our body with water, it has an extremely negative effect on its condition. The consequence of this phenomenon can be significant problems with the functioning of the urinary system and kidneys.

A dense layer of scale leads to long-term heating of water, and in electric kettles - to breakdowns of the heating coil. The rate of plaque formation depends on the hardness of the water, but even filtration will not eliminate the need to periodically remove scale from the kettle.

To rid the kettle of scale and extend its service life, you can use it like special preparations from the store. household chemicals, and home remedies:

soda;

vinegar;

citric acid or lemons;

sweet soda;

pickle from canned cucumbers or tomatoes;

peel of apples, pears or potatoes.

Soda softens limescale, and other products contain acids, which are afraid of scale. For cleaning you will also need a soft brush, sponge or brush. Do not use metal scourers to speed up the process, as they damage the dishes.

The easiest way to remove scale from a kettle is to use improvised means that are found in every kitchen: citric or acetic acid, soda or a combination of both.

Cleaning with vinegar

Manufacturers do not recommend cleaning electric, enameled and aluminum kettles with vinegar; the product is suitable for stainless steel dishes with old deposits.

With a small layer of lime, fill 2/3 of the kettle with water, and the remaining 1/3 with 9% vinegar. Bring the solution to a boil over low heat, remove the kettle from the heat and set it aside for 1-3 hours to loosen the scale. If the bottom and walls of the dish are covered with a thick and dense crust of deposits, prepare a solution at the rate of ½ cup of vinegar per 1 liter of water, pour it into the kettle, put on low heat, wait until it boils and boil for another 10-30 minutes - depending on the volume of the vessel.

After cooling, rinse the kettle thoroughly with a soft sponge, removing any remaining scale, boil it 1-2 times with clean water and rinse the container to remove any traces of vinegar.

Cleaning citric acid

A gentle product will help get rid of scale on any kettle. To remove dense deposits of lime, boil a kettle with an acid solution (10-15 g 1 liter of water), turn it off immediately after boiling and cool it for 30-60 minutes - during this time the scale will dissolve or soften. Then drain the liquid, remove any remaining deposits with a sponge, boil a container with clean water and rinse thoroughly. If you were unable to remove old scale on the first try, repeat the procedure.

In order not to subject the kettle to boiling with acid, it is enough to clean it monthly without heating: dilute the acid with water, pour it into a container and drain the solution after a few hours - a small deposit will disappear without a trace.

Cleaning with soda

Regular baking soda or soda ash will help restore the original cleanliness of any kettles, including electric ones.

Fill the bowl with water, add 1 tbsp. soda, boil and hold for half an hour over low heat. Cool, drain the solution and wash the kettle, then fill it again with water and boil, removing any remaining soda. After this, rinse the container again.

Option 2. Pour 1-2 tbsp into boiling water in a kettle. soda and immediately turn off the heat. After 1-2 hours, remove softened mineral deposits from the dishes, boil them with clean water and rinse again.

Cleaning old scale

Option 1. Moisten a sponge with vinegar, dip it in soda and rub the resulting slurry into the surfaces covered with a layer of scale. When vinegar and soda are combined, a reaction will occur that destroys the deposits; all that remains is to rinse and rinse the kettle. If the deposits are dense, cleaning will need to be repeated.

Option 2. Suitable for most neglected teapots with a thick layer of scale, but not applicable for electric ones due to excessive aggressiveness. Cleansing is carried out in three steps:

Pour water into a container, add 1 tbsp. l. soda, boil, set aside for 10-20 minutes, drain the solution.

Refill with water, add 1-2 tbsp. citric acid, boil the solution over low heat for half an hour, drain.

Pour water into the kettle again, add 1/2 cup of vinegar, boil for another half hour, drain the liquid.

Most of the scale will come off on its own after such a powerful attack; loose residues can be easily removed with a simple sponge. Then be sure to rinse the kettle and boil it 3-4 times clean water and rinse the dishes.

For especially severe cases - soda, citric acid and vinegar (not for electric kettles)

Suitable for the most neglected condition of the kettle. Pour water into the kettle, add a spoon baking soda(dining room), boil the solution, drain the water. Next, add water again, but with citric acid (1 tablespoon per kettle). Boil for about half an hour over low heat. Drain again, add fresh water, add vinegar (1/2 cup), boil again for 30 minutes. Even if the scale does not come off on its own after such a shock cleaning, it will definitely become loose and can be removed with a simple sponge. Hard brushes and metal sponges are not recommended for all types of kettles.

How to descale a kettle: method 2 - “delicious”

Adherents of safe natural remedies will appreciate the method of descaling by peeling potatoes, pears or apples containing organic acids. The peelings need to be rinsed, placed in a kettle, filled with water and the liquid boiled. After boiling, set the kettle with the peel aside for 1-2 hours, and then rinse the dishes well. The product is suitable for removing light scale deposits.

Cucumber or tomato brine is an excellent way to get rid of lime “deposits” due to the content of citric acid or vinegar. The brine needs to be poured into the kettle, boiled, cooled, rinsed and thoroughly rinsed the container to remove the smell of preserved food. An additional bonus of the method is the removal of rust from the inner surface of the vessel.

Lemon fights scale well. The sour fruit needs to be cut into quarters, put them in a kettle, add water, place the dishes on low heat and boil the solution for 10-15 minutes after boiling. If the scale is not softened enough, repeat the procedure, and then rinse the kettle and rinse with plenty of water.

For effective removal To remove limescale in the kettle, you can also use sweet soda.

Open the bottle of drink to release the gases, then pour 0.5-1 liters of liquid into the kettle, boil, let cool and rinse the container thoroughly. If there is a small layer of deposits, you can do without boiling - just fill the kettle with soda to dissolve the deposits, and wash it after a few hours. The cleaning effect is based on the content of citric and phosphoric acid in the drink. Choose a clear soda, for example, 7UP, otherwise you will later have to remove colored stains from Coca-Cola or Fanta from the surface of the dishes.

Another the right remedy- wood ash. You should pour more ash into the kettle. Then use a washcloth or sponge to rub the ash into the areas with scale. Finally, rinse the kettle with warm water.

How to descale a kettle: the chemical method

The destruction of scale by household chemicals is achieved by containing citric, adipic or sulfamic acid. Special products are available in the form of liquids, powders or tablets and are used according to the instructions. General scheme use - the solution with the cleaning agent is boiled in a kettle for 30-40 minutes, then drained. Softened scale can be easily removed, and after cleaning the kettle, you should boil clean water 2-3 more times to remove chemicals.
The effectiveness of using store-bought anti-scale products is comparable to the effect of vinegar and citric acid, but the latter are much more economical.

How to descale a kettle without ruining it

Even if the kettle is covered with a thick layer of plaque, do not scrape it with sharp objects, do not use hard brushes or steel wool for cleaning - such cruel way severely damages the dishes.

For the careful and effective removal scale, wash the inside of the kettle well, and then use home remedies or chemical reagents for dissolving or loosening the lime “coat”. After cleaning, be sure to wash the kettle with a sponge or soft brush, boil water in it a couple of times and rinse the dishes again to avoid poisoning.

The frequency of descaling the kettle depends on the hardness of the water used, but try not to start the process - with each boiling, the crust of plaque becomes stronger and thicker.
Preventive care will help minimize its formation:

rinsing after each boiling and washing the kettle daily with a sponge;

using filtered water, fresh each time - repeated boiling increases the precipitation of salts;

draining the water from the kettle at night or during long periods of inactivity.

Household anti-scale products

In our technologically advanced times, many household products have been created to help remove scale: “Antikipin”, “Cinderella”, “Antiscale”.

They contain soda ash, commonly used to soften water. This product is available in liquid or powder form. But they are used in the same way - they are poured into a kettle, filled almost to the top with water and boiled.

Other products from various manufacturers, including foreign ones, are also sold. However, they all have a similar operating principle and the same result.

Caution - chemistry

Household products serve the easy way getting rid of scale. But it has disadvantages:

chemicals contained in cleaning products enter the stomach, which is not safe;
Some formulations do not give the desired result.

The choice of methods for descaling a kettle is quite large, and home remedies are as effective as store-bought ones. The main thing is not to forget to repeat the procedure regularly.

Sources:

Every housewife should know how to descale a kettle. Unfortunately, sufficiently effective methods have not yet been invented to prevent the appearance of limescale on the walls and heating element of a functional apparatus. By filtering the water, as well as regularly rinsing the container with a weak solution of soda or citric acid, you can only slightly reduce the rate of scale formation. Fortunately, there are many cleaning methods that allow you to restore the device even at home. Before you replace your old device with a new one, you should try one of them.

Causes and consequences of scale formation

Limescale deposits form equally actively in teapots of all types and designs. Only if it is an electrical appliance, a layer of scale mainly covers the heating element. In a stainless steel container or its enameled equivalent, sediment covers the bottom and walls to the level to which water is poured. The harder the water is used (high salt content), and the more often it is boiled, the faster the problem becomes obvious.

If you do not try to wash the container, you will very soon have to face the following consequences:

An electrical device can become unusable from such exposure. This is due to the fact that plaque blocks contact of the heater with water and the steel is constantly heated to prohibitive temperatures. In the end, the element simply burns out
The lime composition, entering the human body, begins to cause negative reactions. If you do not remove the scale in the kettle in a timely manner, you can provoke the development of a disease of the excretory system.
Under the influence high temperatures in the composition of scale constantly occur chemical reactions, due to which the taste and smell boiled water gets worse over time.

Tip: Regardless of what cleaning product was used for the kettle, after carrying out manipulations in the container, you need to boil clean water at least twice. Only then will it be possible to use the device for its intended purpose without the risk of spoiling the taste of the drink or causing an upset stomach.

Of course, to get rid of scale in a kettle, you can purchase special chemical products that are offered in household goods stores today. And yet, practice shows that the problem can be solved with the help of folk remedies. Moreover, the result will be no less quality, and the risk unpleasant consequences– minimal.

Simple but effective ways to remove scale

Preparing to work with lemon or acetic acid, baking soda and other popular reagents, you need to take into account the type of material from which the kettle is made. Among the most gentle options for exposure at home, approaches based on the use of such products are especially popular:

Use of citric acid. This product can be used when working with any materials, even plastic. We dilute 1-2 teaspoons of the reagent in 1 liter of water. For larger containers the same proportions apply. Fill the kettle with the resulting solution and turn it on. The composition should be boiled no more than 1-2 times. During this time, the plaque will come off and the surfaces of the product will be renewed.

Cleansing with Coca-Cola and other carbonated drinks. This method known to many, but not everyone follows the subtleties of the manipulation. First of all, the container with the drink must be opened so that most of gases Then fill the kettle with Coca-Cola to about halfway (traces of scale should be completely covered) and bring the contents to a boil. All that remains is to wash the walls with a soft sponge. It is worth considering that such exposure may cause the electric kettle to break. And to clean light-colored products, you should not use Coca-Cola or Fanta, they can stain the metal.

Treatment with soda. The best option for processing enameled and metal containers. Simply fill the kettle with water, add a tablespoon of baking soda and bring to a boil. The mass must be boiled for another half hour, using very low heat. Then the device should be removed from the stove and cooled in a natural way. All that remains is to drain the liquid and clean the container manually. You can do no more than 3 approaches. If the procedure does not help, other treatment options are used.

Using brine. Simple and available method. To remove scale from a kettle, you need to fill it with brine from pickled tomatoes or cucumbers and boil the contents.

Purification based product. To remove light whitish plaque, you should use apple or pear peelings, and more dense ones, potato peelings. We put them in a container, fill them with water and boil them, then remove them from the stove (unplug them) and let them sit for two hours.

The above methods are considered the most gentle at home. But they should only be used if absolutely necessary. It’s better to just regularly wash the device inside and out with a citric acid solution (1 sachet per 1 liter of water). There is no need to boil the liquid!

Aggressive methods for removing limescale

In cases where the recipes described above do not help, you have to use more drastic methods to solve the problem. Before you descale the kettle with vinegar, it is worth considering that if it has a plastic or glass body, the consequences can be very unpredictable. It’s better not to take risks and use such approaches only when working with metal products.

Cleaning with vinegar. For 1 liter of water, take half a glass of vinegar, pour the solution into a kettle and bring to a boil over low heat. After this, we evaluate the degree of plaque removal and, if necessary, extend the manipulation for another quarter of an hour.

Using vinegar, baking soda and citric acid. If you have run out of methods, and removing the plaque has not led to anything, you need to do the following. Alternately boil water in a kettle with soda (a tablespoon per liter), citric acid (a tablespoon per liter) and vinegar (0.5 cups per liter). The exposure time in each case is half an hour. Treating with soda, lemon juice and vinegar will at least soften the scale, allowing you to scrub it off with a sponge.

There are as many housewives as there are recipes for cleaning teapots. Some are ready to clean the product with the help of Whiteness, after which they spend a lot of time eliminating the persistent chlorine odor. The approach is, of course, effective, but can lead to permanent damage to the material.

Whatever water you use - tap, purchased or spring - sooner or later it will appear in the kettle white coating. This is scale formed as a result of the deposition of potassium and magnesium salts dissolved in water on the walls. If it is not cleaned regularly, it will turn into limestone. I will tell you about all the ways to remove scale from a kettle without resorting to special means.

Why scale is dangerous and how to avoid it

It’s clear why scale appears: it’s salts evaporated from water. You can avoid its appearance only if you use distilled water. But it is not only not useful, but also harmful to the body.

However, scale from water itself is also not harmless.:

Damage to health. The high content of undissolved salts in drinks leads to cholelithiasis and other physiological disorders;
Scale affects the taste of water;
Electricity. Limestone on the bottom and walls of the kettle reduces their thermal conductivity and forces you to spend more energy on heating water. And the heating elements in an electric kettle quickly burn out.

Therefore, the answer to the question of how to remove scale from a kettle will help you solve not only an aesthetic problem. But also to avoid unnecessary expenses and health problems.

Unfortunately, it is impossible to completely prevent the appearance of plaque. But you can prevent the formation of a thick and hard layer, which is very difficult to deal with.

To prevent a thick layer you need:

Use soft water. It can be filtered, settled before boiling, or purchased from reliable suppliers.
Do not keep water in the kettle. After each tea party, the leftovers should be poured out and the dishes should be rinsed.
Clean regularly. Depending on the quality of the water, it needs to be repeated every 2-4 weeks.

To do this, you can use special products sold in stores. Their price varies from 20 to 300 rubles, but, in my opinion, they act exactly the same. The method of application and the time spent on cleaning may differ - each product comes with its own instructions. But this is not important.

But you can do without them. After all, in every kitchen there will always be other, more natural remedies capable of coping with this task.

6 ways to get rid of scale

If you don’t know how to descale a kettle, look in your kitchen cabinet or refrigerator. You need foods that contain acid. These are vinegar, citric acid or fresh lemons, apples, pickles and even carbonated drinks.

Method 1 - using vinegar

This product perfectly softens even old mineral deposits. But it is quite aggressive, so it is better not to clean a plastic electric kettle with it. As well as enameled or aluminum.

We act like this:

Pouring water into the kettle so that it covers the entire plaque;
Bring it to a boil and remove from heat;
Carefully pour a glass of 9% vinegar into boiling water. or 2 tablespoons of essence for every liter of water;

Leave for 1-2 hours.

During this time, the plaque will become loose and can be easily removed with a sponge.

Method 2 - using brine

The brine from pickled cucumbers or tomatoes already contains vinegar, so it can also be used to descale the kettle. There is no need to dilute it, just strain through a sieve.

Sour milk and whey, which contain organic acids, have the same effect.

Method 3 - using citric acid

Citric acid is not so aggressive, so it is also suitable for aluminum, plastic and enameled metal kettles. You can use either powder or fresh lemon.

The amount depends on the degree of contamination:

1 tablespoon powder or a quarter of a medium lemon per 500 ml of water will remove the faint white residue in the kettle;

Twice as much required for a thicker layer of scale.

But citric acid will not dissolve large deposits that have already stuck to the walls.

The recipe is the same as when cleaning with vinegar: the acid is added to freshly boiled water, and after a couple of hours it is poured out along with the dissolved salts. Their softened remains will need to be removed with your own hands using a dish sponge.

Method 4 – using carbonated drinks

Sprite, Fanta, Coca-Cola and other carbonated drinks contain phosphoric acid, which can also remove scale from the kettle.

They are poured into an empty container, stirred to get rid of gases, and then brought to a boil.

When the liquid has cooled, the kettle can be washed.

Method 5 - using apple skins

This method will not help clean the kettle. strong scale. It is rather preventive, used when plaque has just begun to settle on the walls. To get rid of it, just fill the peelings in a kettle with water, boil it and after an hour pour it out along with the skins.

In addition to apple skins, you can use pear skins or washed peelings from raw potatoes.

But this gentle method is suitable for cleaning ordinary teapots made of any material. If you use it regularly, you will not see scale in them at all.

Method 6 - using soda

Another effective one home remedy– baking soda or soda ash.

It is applied like this:

Before descaling from the kettle, you need to mix two tablespoons of powder with a liter of water;
Pour the solution into the kettle and she put it on fire;
When it boils, reduce the heat and leave the water to simmer gently for half an hour;
Then drain the solution, and rinse the dishes and boil clean water in it.

In general, after each remedy listed above, it is recommended not just to wash the kettle, but to boil clean water in it 1-2 times.

What to do with old plaque

If the scale is old and covers the surface with a thick layer, only special remedy or repeated use of the methods described above.

It is best to alternately apply vinegar, baking soda and citric acid, using a higher concentration of cleaning solution.

Even if the scale does not come off on its own, it will become soft and loose, which will allow you to clean it off the walls.

Conclusion

I hope that the listed methods for descaling a kettle will help you always keep your dishes clean. And those who wish can boast of particularly impressive results in the comments.

The video in this article shows the cleaning process - you can see for yourself that these methods work.

Every housewife has a kettle in her kitchen. Some people prefer to heat water for coffee or tea on gas, while others use electric kettles. Glass models are extremely resistant to high temperatures, do not absorb odor, and have a beautiful appearance. But over time, scale forms in any vessel, no matter what kind of water you use. Scale appears due to the build-up of salts and minerals contained in water. The rate of plaque formation depends on its quality. But even if you install super-sophisticated filters, sooner or later plaque will still appear. In an electric kettle, scale forms around the heating coil and causes it to burn out after some time. To prevent this from happening, you need to periodically get rid of plaque. How to clean a glass electric kettle from scale at home and remove plaque? We will deal with this in this article.

Anti-scale products

There are several ways to clean and descale a glass teapot. You can use chemicals or traditional methods, which are good because they are safe, plus similar cleaning substances are available in every kitchen. Let's take a closer look.

Vinegar

This is a proven, effective, completely safe way to clean a glass teapot from scale. In addition, it has an antibacterial effect. So the microbes will have a hard time.

How to proceed:

Pour equal parts water and vinegar into a container.
Boil this solution.
Leave everything inside for 2 hours.
Pour out the liquid and clean off any remaining plaque with a sponge. You need to wash it carefully.
If necessary, the procedure can be repeated.
After cleaning, boil clean water a couple more times and drain.

Lemon acid

Another simple one effective method getting rid of plaque - citric acid. This method is suitable for any type of cookware. It is even believed that cleaning with citric acid is more effective than vinegar:

Pour water into the device, add citric acid. For 1 liter there are 2-3 teaspoons of citric acid.
Boil the liquid.
Leave until completely cool.
Drain off the cleaning agent and remove any softened residue with a sponge.
Boil the water in the device several times and drain before using it.

Important! Citric acid can be replaced with lemon juice. Just squeeze one citrus fruit into a bowl of water.

Baking soda

Cleaning with soda is done as follows:

Dissolve in hot water baking soda, pour into a container.
Leave for 15 minutes, then boil.
Wait until the liquid cools down.
Rinse well kitchen utensils from cleaning agent residues and scale.

Soda and vinegar

How else can you clean a glass teapot? You can clean the device with a mixture of soda and vinegar:

Dissolve 2 tablespoons of vinegar and 2 tablespoons of soda in water.
Pour this mixture into the device to the maximum mark.
Boil the liquid several times and leave to cool.
Drain the solution. Use a soft sponge to remove any remaining plaque.
Rinse well inner part dishes in running water.

Lemon and vinegar

You can get rid of plaque inside the vessel by mixing lemon and vinegar:

Dissolve 2 tablespoons in 1 liter of liquid lemon juice or citric acid and 2 tablespoons of vinegar.
Pour the mixture into the device.
Boil this solution several times.
Drain the liquid and clean the device with a sponge.
Rinse well.

Lemon and soda

The combination of lemon juice and baking soda will give good result in the fight against plaque from excessively hard tap water. This mixture will degrease and remove deposits, leaving behind a pleasant lemon smell.

Boil water several times with 2 tablespoons of lemon juice and 2 tablespoons of baking soda.

Carbonated drinks

Strange as it may sound, you can clean limescale using carbonated drinks. For glass electric kettles would be better suited“Sprite”, since colored drinks, such as Coca-Cola, can leave marks on the walls.

Pour one glass of lemonade into a container and fill it with water. Boil this mixture several times, drain and clean off any remaining plaque with a sponge.

Important! If the coating is very strong, there is no need to dilute with water - fill the container ⅔ full with soda only.

Other non-standard cleaning methods

What people come up with and what they use to clean their dishes from harmful scale:

Pour the cucumber brine into the container and bring to a boil several times. In fact, the method is effective, since the product is nothing more than a concentrated saline solution.
Place the washed apple or potato peels in a container, add a little salt and fill with water. Boil water along with the cleaning agents and leave everything until the liquid cools. Then all you have to do is clean off any remaining plaque with a sponge and rinse the device thoroughly. This is also a completely understandable option, since apples contain natural active acids, and potatoes contain starch. Both are capable of removing contaminants of various origins, including scale.

Kalgon

From chemicals To combat lime and salt deposits on glass electric kettles, Calgon is best suited. This product is dishwasher safe and washing machines with a unique composition will come in handy. One package will last you a long time.

In order to remove scale with Calgon, you need to dilute 1 teaspoon of the product in 3 liters of water and boil it all in a vessel with scale. After this, removing the remaining plaque will not be difficult.

Important! After this, it is advisable to boil the water in the vessel several times and drain it. After this, the device can be used.

Prevention measures

To ensure that the kettle lasts for a long time, you need to follow these recommendations.

In most localities tap water contains many impurities, especially calcium and magnesium salts. During boiling they form an insoluble precipitate. Therefore, an unpleasant coating often forms inside the kettle - scale. These salts become insoluble and are deposited on its bottom, walls and heating elements. Due to scale, the taste of water deteriorates; small pieces of it get into the tea and spoil its appearance and our health. For electrical appliance it is even more harmful because it takes longer to boil and breaks faster. Most housewives know citric acid, but there are several other methods.

What are the cleaning methods based on?

It is very unpleasant when, when you add water from the kettle, yellowish scale flakes fall into your cup. Moreover, it forms even if you use filtered water, because filtration does not remove calcium and magnesium salts from it. Over time, their insoluble forms corrode the enamel or plastic of the teapot walls. Due to scale, its boiling time increases greatly. Therefore, you need to fight it regularly: this way it will be easier to remove than a thick layer.

All methods of cleaning a kettle are based on the fact that scale is a deposit of salts. Acids are used to remove them. They react with salts and convert them into soluble form. Many people know how to descale a kettle. This method is based on precisely this property of chemicals. Nowadays descaling products are sold, some people use them because it is easier. Pour the product from the bag into water and boil. You can descale it in one go using this method. But many people don’t like the fact that traces of chemicals may remain on the walls, so they prefer to use traditional methods.

How to descale a kettle with citric acid

This is the most common and known method maintaining your heating device in order. You just need to pour a packet of citric acid into the kettle and boil the water for 5-10 minutes. Then leave this solution for half an hour. Many people leave the kettle with citric acid overnight if the scale layer is very thick.

How should this product be diluted correctly? For a regular two-liter kettle, take 1-2 bags of acid (or 2 heaped tablespoons). You can also use lemon juice by squeezing it from 1-2 fruits. After the boiled solution has cooled, the water must be drained, but not into the sink, as it may become clogged with scale flakes. Remaining plaque can be easily cleaned with a sponge. If the sediment is very thick, the procedure must be repeated.

Cleaning the kettle with citric acid is very simple and cheap way. You can even descale an electric kettle this way. But not everyone uses this method, because a concentrated acid solution can be dangerous for the metal and cause corrosion. There are several other simple and safe methods.

Our grandmothers' way

Since ancient times, women have cleaned dishes with soda. It was also used to descale the kettle. Soda not only mechanically carefully removes plaque, but also softens the sediment. Along with citric acid, this is one of the most safe ways. After all, even if you don’t rinse your kettle well and the remaining product gets into your tea, it’s unpleasant, but it won’t harm you. Often these two remedies are used together. This removes old thick sediment more effectively.

How to descale a kettle with soda? Dissolve a couple of tablespoons in water and boil for half an hour. After the kettle has cooled down, boil it again. After draining the water, you will see that the scale has become loose. If you cannot remove it with a sponge, you can then boil water with citric acid, this will remove the most difficult deposits.

Other folk methods of dealing with scale

Boil in a kettle for an hour potato peelings, apple peel or cut lemon.
Instead of water, pour cucumber or tomato brine into a bowl and boil for at least an hour.
Boil the following solution in a kettle for an hour and a half: two glasses of water, three glasses of crushed chalk and a glass of ammonia and laundry soap.

How to clean a kettle with acid

But most often, modern housewives use acids to remove salt deposits. After all, everything folk remedies Not suitable for electric kettles.

Such solutions boil for a long time, and it will constantly turn off. Therefore, it is best to do this by pouring two-thirds of water, adding table vinegar to the top. This solution must be brought to a boil and cooled. The scale should dissolve without a trace, but if pieces of it remain, the procedure can be repeated.

IN Lately Many housewives use Coca-Cola or Fanta instead of vinegar. These drinks also contain acid, which dissolves sediment. The peculiarity of this method is that you only need to pour half of the kettle, and before that, completely remove the gases from the drink. In addition, when boiling, traces of dyes may remain on the walls of the dishes, so it is better to take colorless soda, such as Sprite.

How to properly descale a kettle

After using any method, the dishes must be rinsed thoroughly so that no traces of solution remain on the walls. It would be nice to boil clean water in it and pour it out.
When cleaning electric kettle do not make a highly concentrated acid solution, which can corrode the plastic walls and heating elements.
Be sure to warn your family not to drink tea during this time, as they may add acid to the cup instead of water.

Many housewives have long known how to descale a kettle with citric acid. But it turns out there are many other cheap and reliable ways to do this easily.