How to use command block in minecraft. Command block in Minecraft: how to use

Command block in Minecraft, this is a block into which you can enter various commands. After receiving a signal from the red stone, it will begin to complete the task assigned to it. The block greatly enhances the player experience and has many uses in gameplay. Thus, many gamers have a question about how to make a command block in Minecraft.

Creating a Command Block

It’s not possible to just take and make a command block (from English “command block”) in Minecraft. However, it can be obtained using special cheats and commands.

1. Start a single player game in Maine in creative mode.
2. In the world settings, enable the function of using cheats.
3. Puzzled by the question of how to make a command to issue a block in Minecraft, you need to open the console.
4. In the console line you will need to enter the command: give *player nickname* command_block.

After executing this command, the block will be in the hand of the corresponding player's character.

You can give a block to yourself, to another player, or to an entire group. They cannot be used in survival mode.

How to use the block

The block is widely used in the game, executing various commands.

When the command block is in the character's hands, right-click on the ground to place it. After this, you need to click the same button on the attribute itself.

This will open a command block window where you can enter the required task or change its parameters. In the future, changes can be made at any convenient time. If anything was done incorrectly, the user will receive a corresponding notification in the same window.

Blocks can be in passive mode, triggered by a chain reaction through similar objects, or triggered by a signal transmitted by a red stone. The command block can also have a direction, according to which you can build a whole chain of blocks that are triggered one after another.

If desired, the player can set a binding for the block. Using this function, you can kill specific entities or everyone in the area, in addition to the player himself. The block can also be configured to interact with other players.

In some situations, a command block can be used to teleport one player or an entire group. To do this, you will need to correctly specify not only the command, but also the coordinates.

In principle, the command block supports a lot of tasks, familiarize yourself with full list which are available on numerous Internet resources. You can view the entire list of possible commands directly inside the game by entering /help in the chat window.

Video: How to use the command block in Minecraft.

The execution of any actions assigned by the game participants is carried out by command blocks. You won't be able to create a team like this while playing in survival mode. Summoning them as tools during use will also not work. game mode creative. To functionally obtain such blocks, you need to use a couple of fairly simple commands, which, in fact, will allow you to call them. Let's look at a few simple methods.

Get a Command Block in Minecraft: Method 1

Launch Minecraft and select single player mode. Create a world with cheats enabled.

Open the chat window and press the “/” key. This symbol will open a window in which you can enter commands.

Enter the destination you need by selecting from the following lines:

• “/give” the name of minecraft:command_block and the required number - after entering it into the console, the summoned items will appear among the tools;
• “/setblock x y z minecraft:command_block” – this line turns one of the blocks into another, making it a command block, and to find it, you need to press F3 and select one of the found ones;
• “/summon Item x y z (Item: (id:minecraft:command_block, Count:1))” – by entering this sequence, the game participant will summon blocks where he needs them.

Get a Command Block in Minecraft: Method 2

Launch the game, select single player mode. Log in to an existing world, perhaps it will be a server. Enter the chat required to set commands by clicking on “/”.

Enter one of the suggested options:

• “/give name minecraft:command_block required number” – this line allows you to summon the required number of items and add them to your existing inventory;
• “/setblock x y z minecraft:command_block” – if you enter this text, you can replace any existing block with a command block, and to determine the location where it is located, you need to press the F3 key;
• “/summon Item x y z (Item: (id:minecraft:command_block, Count:1))” – blocks will appear in the specified area.

Get a Command Block in Minecraft: Method 3

• Using the "E" key, drag the block and place it on the panel. Click on the right mouse button and place the item on the ground.
• Click on it again with the same mouse button. This will open a menu where you can configure actions.
• In this window you need to enter the symbol “/”. The options in these blocks are similar to those used in chat. They are sometimes connected to an electrical board. This allows commands to be executed automatically.
• Press the “/” key, a console window will appear in which write the word “help”. After it, type the name of the item to which the sequence of commands is prescribed.

Command block- a non-transparent block that cannot be crafted. This block is necessary to activate a variety of commands that are written in the command console.

How to get a command block in Minecraft?

To get it, you need to enter the following command in the chat without parentheses: /give [Your_Nick] command_block [Desired number of blocks]. For example, /give Razmik command_block 1. After pressing the Enter button, the command block will appear in your inventory.

How to activate a command block in Minecraft?

You can activate the code you entered in the command block using a lever, redstone, redstone torches, or through a button.

Let's look at the simplest commands that can be used in a command block.

• Changing the time of day. For example, you want night to fall. To do this, install the block, click on it with LMB and enter the following command in the console: /time set night.
• Teleportation. For example, you need to teleport to some point on the map. To do this, go to the selected point, press F3 and remember coordinates x,y,z. Then we go to the command block and enter the following command: /tp @p 252 56 -175. The numbers 252 56 -175 are the coordinate values ​​x,y,z.

There are a huge number of commands, the simplest of them are given above.

GIVEAWAY OF ACCOUNTS/KEYS/BASES/FREETIES

How to make a command block in Minecraft?

The command block did not appear in Minecraft right away. Only in version 1.4 do players have new opportunities. It is in this version of Minecraft that users will learn what a command block is, which is closely related to console commands.

What is a command block

Actually, a command block is a block in which players write certain commands. The command block can be opened by clicking on it with the mouse. After which a field will appear in which commands to be executed are written. Information about the result of the entered commands will be displayed below.

How to make a command block

Unfortunately, an ordinary user cannot make a command block in Minecraft himself, despite the player’s great desire, because with the help of a command block in the virtual world you can completely control the map and chat with all players at the same time. You cannot make a command block yourself, you can only receive it. There are several options for how to obtain a command block.

Teams

In order to receive full list commands that can be written in the command block, just enter the word help in the chat window.

By entering these commands you will get the required result:

• give @p iron_ingot 10 - 10 iron ingots
• setblock 42 21 60 wool - set the block at coordinates x=42, y=21, z=60
• tp Player 42 21 60 - teleport to a point with coordinates x=42, y=21, z=60

You can also use pointers to players:

• @p - closest player;
• @a - all players;
• @r - random player;
• @e - all entities.
• x - X coordinate of the search center;
• y - Y coordinate of the search center;
• z - Z coordinate of the search center;
• r - maximum value of the search radius;
• rm- minimum value search radius;
• m - game mode;
• l- maximum amount player experience;
• lm - the minimum amount of experience a player has.

Today we will talk about what a command block is in Minecraft, how to get it, why it is needed and how, where and what it can be used for.

What are command blocks?

IN Minecraft game The command block (CB) can automatically execute certain console commands as long as it is activated by a red stone.

They work in adventure mode, and allow map creators to improve interaction with the player. In this case, the player is not able to destroy blocks and build new ones.

In Survival mode, command blocks cannot be interacted with or destroyed.

They cannot be created through crafting, and they cannot be found in the inventory when playing in creative mode. Creative mode players and server administrators can use console command"give" to receive KB or make it available to other players. It looks like this:

/give minecraft:command_block

When typing the command, remove the parentheses around the player name and number:

/give atombox minecraft:command_block 1

KB has a graphical interface with a text field, accessible by right-clicking the mouse.

Only players in creative mode and players with administrator status on the server can place command blocks, enter commands and save changes.

For their use in single player or multiplayer worlds, you must enable LAN mode and enable cheats.

Where are command blocks used?

Have you ever played on adventure maps where it's always night, or where the weather never changes? You may have downloaded maps where players receive special rewards, upgrades, or experience by pressing a button or completing a task. All this becomes possible thanks to KB. When creating your Minecraft map, you need command blocks if:

• Do you want constant day or night;
• Do you want to change the weather;
• Do you want to change the difficulty of the game;
• You want to produce a specific sound;
• You want to send a message to the player;
• You want to teleport to another location;
• You want to give players items.

There are many videos on YouTube describing a variety of Minecraft maps. Multiplayer maps are especially popular. There are many categories of Minecraft maps available for download that use command blocks to enhance the player's experience. There are many reasons for map developers to use them. Among them are cards of the following categories:

• Adventure cards;
• Parkour maps;
• Puzzle cards;
• Survival cards;

Adventure cards are focused on the plot, and the gamer acts as the main character of the story. Previously, adventure maps relied on telling a story through signs and books, but now the storytelling is available through dialogue and sounds, all thanks to KB.

Parkour maps force the player to get from one end of the world to the other with minimum quantity deaths. They often contain incredible jumps and other deadly obstacles. Command blocks make it possible to set character spawn points in front of complex obstacles.

Puzzle cards emphasize problem-solving skills by introducing mazes, traps, and other challenges. Some of these cards have a plot, just like adventure cards. Using KB allows such maps to more easily suggest directions, story-related dialogue, and sounds.

Survival Cards may focus on survival in single player or multiplayer, or include a story along the way. KBs can give players a starting spawn point as well as story-related information. The possibilities here are endless.

How to use a command block

Installing them is easier than most Minecraft players think. The commands can be confusing, but some of them (like setting the time of day) are very simple to program. Big projects You can plan later, but first try to master the basics of placing, configuring and using KB.

Remember that command blocks can only appear in creative game mode. To switch to it, you need the appropriate privileges on the server (if available) or activated cheats.

In the chat field, type "/gamemode c", "/gamemode creative" or "/gamemode 1" without quotes.

2. Right-click on the command block

In creative mode, to access a command block, right-click on it. To generate it, you need to use the “give” command, as described above in the text:

/give minecraft:command_block

Command blocks only work when connected to the redstone electrical circuit (by the way, there is good mod, allowing to increase the distance of energy transmission). Right-clicking opens a dialog box where you can enter a server command. Maximum length commands can be 254 characters long.

3. Enter the command and click "Done"

When you enter a command into a block, you need to indicate which player it is directed at. This can be done by entering the player's name or selecting three different variables: "@p" (closest player), "@r" (random player) or "@a" (all players). These variables are especially useful in situations where the player activating the command is unknown. After specifying the command, click “Done” to save it.

Remember that one KB can only execute one command!

Practical use cases

The following examples are simple and practical command block applications in single and multiplayer in Minecraft worlds.

How to change the rules of the game

Game Rules are a relatively new feature that allows players and command blocks to change certain basic settings in the Minecraft world. There are nine described game rules that can be controlled using the command block on the map.

You can use game rules to create constant daylight or darkness, turn off mob spawning, mob item drops, and much more. When entering the "gamerule" command, use the following command:

Game rule	Effect of the rule
commandBlockOutput	Enables/disables text input in KB
doDaylightCycle	Enables/disables day/night cycle
doFireTrick	Enables/disables fire propagation/disappearance
doMobLoot	Enables/disables item drops from mobs
doMobSpawning	Enables/disables mob spawning
doTileDrops	Enables/disables items falling out of the KB when they are destroyed
keepInventory	Enables/disables saving items in the inventory after the death of a player
mobGriefing	Enables/disables destruction of KB by creepers or edge wanderers
naturalRegeneration	Enables/disables health regeneration for players

How to set the weather

Some maps have a dark theme that goes perfectly with rainy weather or thunder, while others are best played with clear skies. There are many options for controlling the weather using command blocks. A simple example of a weather command:

In this case, the word input can be replaced with “clear” (clear), “rain” (rain) or “thunder” (thunder).

You can connect a button or lever to the command block to manually switch the weather, or create automatic circuit red stone for constant weather switching. This is easily achieved by using repeaters, a button and a building block.

How to set the spawn point

Spawn points are an important component many Minecraft maps, including adventure, parkour maps, puzzles and others. Having to replay the map from the very beginning every time you die is extremely annoying. Using the “spawnpoint” command, you can save your game progress and be reborn after death at the nearest completed checkpoint. The command looks like this:

By connecting a command block to a building block with a button or pressure plate, players can set a spawn point at the location of the command block.

If you need something more complicated, you can add coordinates to the command to specify the location of the spawn point.

Running from one place to another is tiring, especially on a multiplayer server. Using the “teleport” command, players can move to specific coordinates in the Minecraft world or to the locations of other players. Enter in the command block:

With them you can have a certain set of coordinates for teleporting the player, like the location of the next part of the adventure map.

If the block is not intended for a specific player, "@p" can be used to select the closest player.

If you're on a multiplayer server, you can bind the command block to yourself by using your Minecraft username.

These are just a few options for using command blocks in single-player and multiplayer Minecraft games. There are many significantly more complex commands and redstone schemes that map makers use.

The command block appeared in popular game Minecraft only from version 1.4, which opens up the latest features for game participants. With this version, gamers learned about the concept of a command block, as well as its connections with the console command. It is impossible to create it yourself.

The command block is a special item; various codes can be entered and written into it. After this, it begins to execute the intended command when it receives a redstone signal. Such a universal thing significantly expands the powers and capabilities of map creators that feature an adventure mode. In places like this, you can make the area private. It can be opened in Minecraft using the right mouse button. As a result, you will see a window in which certain characters are written.

How to make it

Most players will be disappointed because it is impossible to do such a thing on their own. The reason for this limitation is due to the fact that it opens up incredible opportunities, namely that thanks to it you can control the map, chat with all the players at once. Therefore, you cannot do it yourself, but there is a unique chance to get it.

Purchase options:

1. If you are the creator of the server, you can easily use it.
2. You can also get permission from the administrator of a specific server, namely ask for rights. To do a similar action, use the following function - give Player command_block. Enter your character's name.
3. You can make a command block in Minecraft using a special cheat code. But, you will only need to play on a specific server that supports the use of such codes. The final stage is activation, which is carried out thanks to the action of the red stone.

Teams

If you want to get the entire list of commands that can be used, then use the chat and enter the word help. For example, to get ten iron ingots, you need to enter the following form - give @p iron_ingot 10. Another one will allow you to teleport to the desired point with the specified coordinates, namely tp Player 42 21 60.

Pointers to Minecraft players.

• @e – absolutely all entities in the game;
• @a – all Minecraft participants;
• r is the maximum search radius;
• rm – minimum radius;
• m is a game mode.

As you can see, this is a fairly practical, interesting and easy-to-use program that allows you to increase your powers, adrenaline and pleasure in the game to the maximum. It is important that you cannot build or craft it yourself, so you need to use a special command, then you will succeed. Have a good game and new victories.

The execution of any actions assigned by the game participants is carried out by command blocks. You won't be able to create a team like this while playing in survival mode. Summoning them as tools while using creative game mode will not work either. To functionally obtain such blocks, you need to use a couple of fairly simple commands, which, in fact, will allow you to call them. Let's look at a few simple methods.

Get a Command Block in Minecraft: Method 1

Launch Minecraft and select single player mode. Create a world with cheats enabled.

Open the chat window and press the “/” key. This symbol will open a window in which you can enter commands.

Enter the destination you need by selecting from the following lines:

• “/give” the name of minecraft:command_block and the required number - after entering it into the console, the summoned items will appear among the tools;
• “/setblock x y z minecraft:command_block” – this line turns one of the blocks into another, making it a command block, and to find it, you need to press F3 and select one of the found ones;
• “/summon Item x y z (Item: (id:minecraft:command_block, Count:1))” – by entering this sequence, the game participant will summon blocks where he needs them.

Get a Command Block in Minecraft: Method 2

Launch the game, select single player mode. Log in to an existing world, perhaps it will be a server. Enter the chat required to set commands by clicking on “/”.

Enter one of the suggested options:

• “/give name minecraft:command_block required number” – this line allows you to summon the required number of items and add them to your existing inventory;
• “/setblock x y z minecraft:command_block” – if you enter this text, you can replace any existing block with a command block, and to determine the location where it is located, you need to press the F3 key;
• “/summon Item x y z (Item: (id:minecraft:command_block, Count:1))” – blocks will appear in the specified area.

Get a Command Block in Minecraft: Method 3

• Using the "E" key, drag the block and place it on the panel. Click on the right mouse button and place the item on the ground.
• Click on it again with the same mouse button. This will open a menu where you can configure actions.
• In this window you need to enter the symbol “/”. The options in these blocks are similar to those used in chat. They are sometimes connected to an electrical board. This allows commands to be executed automatically.

It's no secret that Minecraft is a game that allows you to interact with a huge number of different blocks. They all have different functions, appearance, location in space, and it is from them that the game world is formed. There are earth blocks, water blocks, stone blocks and so on. You can take them into your inventory or place them back in the world, you can process them, obtaining, for example, the material itself from a block of stone, which can then be processed. In general, the concept of the game is based on blocks, but there is one example that is completely different from the rest - the command block. In Minecraft important role are played by different ones and this object is more likely to relate to the console than directly to the game itself. At first this may sound quite strange, but if you look into it, everything will be quite obvious.

Teams in Minecraft

If you play exclusively in the single-player mode of Minecraft, then you may not even know that this project has a console. It significantly expands the functionality of the game, but this is mainly relevant exclusively for multiplayer mode. The fact is that the server administrator uses the console and the commands that can be entered there to set special conditions game. in Minecraft it serves the same purpose, but in a slightly different way. First, let's look at how commands are used in principle. The administrator can call the console at any time during the game and enter a command there that will change a certain aspect of the game. This can be something mundane, for example, adding monsters or restoring the natural landscape, or something global - even changing the game mode. As you can see, commands in Minecraft give the administrator the full powers of a god in his separate game world. But why then have a command block in Minecraft if the administrator can simply enter commands and activate them in the console?

Command block

Many Minecraft fans are not aware of the existence of a command block, and if they have seen it, they do not know how to use it. In fact, everything is quite simple - the command block in Minecraft is used to automate certain commands and create specific conditions and events. That is, the administrator can place a command block on the map, assign certain commands for it that will be launched when the player activates this block - and now the event for this game is ready. In the block field you can specify who the effects will affect, what they will be, and much more. Thus, command blocks in Minecraft 1.7.2 serve to diversify the gameplay.

Command block conditions

It's unlikely that anyone can argue with the fact that the command block in Minecraft 1.5.2 and later versions is a very powerful and functional object. That is why a simple player cannot get it. This block, as mentioned earlier, is available exclusively to server administrators; it cannot be crafted or knocked out of mobs. The only way for an ordinary player on the server to obtain such an object is through cheat codes, but for this you can be instantly banned. Moreover, if you are not banned for receiving a command block, then its use will certainly not go unnoticed, and you will still lose access to the server. Therefore, it is better to play by the rules, and if you want to use the command block, you can create your own server where you will have all the rights, including access to this object.

Using a command block

As for directly using the command block, everything is quite simple. First, the necessary commands are prescribed to him - the administrator can do this by right-clicking on the block - a field will appear on the screen in which you will need to specify everything the necessary conditions, commands and other information, such as text messages to players. The block is then placed in the game world where players can find it. A red stone is placed next to the block, and when activated, a signal is transmitted to the command block. Naturally, you can set the conditions so that the command is executed continuously or periodically at equal intervals. Thus, you can set fairly clear conditions for the execution of the desired command if you know how to use the command block in Minecraft. Teams can be very diverse, so you can create unique conditions for the players on your server.

Command block activation

In addition to activating the command block using redstone, you also need to know how to activate it when creating a server. You should understand that server planning includes detailed configuration of absolutely everything that will touch your world. Among huge amount data that you will need to configure for yourself in the server properties, there is one line - enable-command-block. It is she who is responsible for whether there will be a command block on your server or not. A value of true enables the command block, and a value of false disables it.

When creating any playable map that will differ from randomly generated areas, construction, pixel art or story scenarios The server administrator cannot do without using the “built-in” functions. To implement them, you can use a command block. This special device, in which you can write a system command, starting from the player receiving a resource and ending with his teleportation to a specified location. But how do you issue yourself a command block?

Warning

There are only two ways to purchase this item. Both of them are that you will need to use system commands. This comes from the fact that it is impossible to make (craft) with improvised materials. That is why the question: “How to issue a command block to yourself?” - remains relevant always. No matter what mods you set for yourself, no matter how you experiment with the ingredients, nothing will work out for you. Anyone who claims that by downloading his mod you will be able to create command blocks is a scammer who is trying to plant a virus on you. So how do you issue yourself a command block?

Methods

The first method of obtaining a command block is that you can create a map in creative mode. The Command Block will be available for purchase among other items.

The second method is a little more complicated. To do this, you will have to use How to issue yourself a command block using the system? To do this, you will have to open the chat and write the following: /give [name:command_block [number]. This command will also be the answer to the question of how to give it to another player.

All syntax is written without parentheses. Instead of the character's name, you must indicate the nickname of the desired player, the number is the number of command blocks received. By the way, the main condition for this command to work is permission to use cheats. If this feature is disabled, you will not receive this item in either single or multiplayer games.

Application

So, let's say you figured out how to give yourself command block, and it is in your inventory. Now let's learn how to use it.

To place a block on the ground, drag it to the quick access panel. After that, select it and click on the desired place. At this moment, a control interface will open in front of you, with which we will enter the function. It is worth considering that one command block can execute only one instruction.

However, it is not always necessary for the player to be able to find a command block and use it. It is much more interesting for the user to press the lever, and a mountain of gold or necessary items appears in front of him. In this case, you can use redstone circuits.

Teams

In order to use a command block, it is not enough to know how to obtain or install it. The most important thing is to be able to correctly write the instruction syntax. To do this, it is important to remember a few simple rules.

1. First the command itself is written. Any function that can be activated using the console can be written here.
2. Then the “area of ​​application” is set. That is, the player to whom the effect or coordinates of the appearance of the item will be applied.
3. And finally, additional arguments that allow you to clarify the characteristics of the object.

In general, the command will look like this.

/[command] [player nickname or coordinates] [parameters]

To make it clearer, let's give a few real examples. Let's start with how to issue items with a command block.

/give @p iron_ingot 30

Using this instruction, the command block will give the nearest player within a radius of 10 blocks iron ingots - 30 pieces. Now let's see how to work with coordinates.

/spawn 10 20 30 /summon EnderDragon

Actually, from the syntax it is already clear that the command summons a dragon at certain coordinates. Finally, note that the full list of commands used by the command block can be seen by entering /help in the chat.