Connect Wi-Fi to your apartment. Setting up a Beeline router

It's time to accept the fact that modern people can no longer do without access to the World Wide Web. The striped operator “Beeline” is striding forward, meeting people halfway, providing free high-speed Internet connections through created Wi-Fi networks in public places in the cities of our state.

The procedure for connecting to them is indecently simple, but sometimes difficulties arise. The following is a step-by-step description of the connection algorithm and solutions to frequently encountered difficulties.

Connection procedure

The process involves receiving authorization parameters through a special number. The user is able to access the global network via public Wi-Fi by entering the name and access code received from the Beeline operator.

The convenience of such a connection is obvious and has long been appreciated by many owners of mobile gadgets that are equipped with a built-in Wi-Fi module.

A stable signal ensures stable reception of data transmission at high speeds.

This connection to the global network is free, so it is not surprising that many citizens are happy to use the opportunity provided.

The main condition is that the user is within the coverage area created by the striped wireless network operator. Fortunately, the company has installed and continues to install its routers in many cities of the Russian Federation.

Such zones exist not only in public stationary areas, such as cafes and shopping centers, but even in the municipality's ring transport.

Necessary steps to ensure access

To set up a connection, you must first make sure you are within Wi-Fi coverage.

For this purpose, you need to activate the wi-fi adapter in the device and find the “Beeline” wireless network. Then all that remains is to connect access to the global network through it.

The entire setup procedure boils down to the following few steps:

After activating the Wi-Fi module and detecting a network from a striped operator, you need to send an SMS to a short number:

Number: 8402;

Short message text: beeline

  1. Wait for the response with authorization parameters to arrive;
  2. Enter the received name and access code;
  3. Ready.

After completing the steps described above, you will be connected to the Internet. In this case, the tariff used, for example, in a smartphone, does not matter at all. Access to the network will be completely free.

Solving problems that arise when connecting

It’s trivial, but most often the user enters authorization parameters with incorrect character case. You must pay close attention to this simple procedure, as even one discrepancy will result in access being denied.

Symbols and numbers must be entered as they are written in the received SMS.

It happens that people confuse letters with numbers, and this is unacceptable. For example, instead of the value “zero”, you cannot indicate the letter “O”, etc.

Rarely, there are situations when a person is unable to make a connection via the provided network. Beeline provides several of the following problem solving options:

  1. Most of these difficulties can be solved by a simple call to “8-800-700-2-111”. Beeline employees promptly eliminate any difficulties that arise;
  2. If it is not possible to call the above number, you will need to visit the operator’s official resource on the World Wide Web and fill out a special form indicating the problem that has arisen;
  3. Come to the operator's office in person. They are distributed throughout the country, and the closest one can be found at the points indicated on the company’s Internet resource, for example, “moskva.beeline.ru/customers/beeline-on-map/”.

Note: If a person chooses the third option, he must have his passport with him. This is a mandatory condition for clients in Beeline offices.

The issued authorization parameters are valid only for 90 days, no more. When the period expires, you will need to repeat the steps described in the paragraph above this instruction: “Necessary steps to ensure access.” After sending the SMS again, the name and access code will be sent again.

What to do if the settings are lost?

The human factor cannot be canceled; people tend to forget passwords and logins. Beeline took this circumstance into account and provided a simple way to restore authorization parameters.

If three months have not yet passed, and the issued code and login have already been forgotten, then send an SMS with the word “pass” to “8402”. After this, an SMS with parameters will be received within a short period of time.

The mobile operator Beeline has several lines of tariff plans that are designed for different devices. Separate tariffs for phone, tablet, modem, all in one. If you purchased a router and don’t know which tariff plan to choose, then this article will help you decide. Next, you will find out the price of tariffs for unlimited 4g Internet for a Beeline Wi-Fi router and their characteristics. Also read on our portal step-by-step instructions on how to...

Are the tariff plans different?

If we look at tariff plans for phones, tablets and modems, they all have nothing in common. However, this operator does not have a separate category of services specifically for Wi-Fi devices, so all tariffs for the Beeline 4G Wi-Fi router are similar to those created for the modem.

Variety of tariffs

You can not only activate one of the services presented when purchasing a device, but also switch to it from your old tariff plan. Below is a list of available options, in addition to “Simple Internet”, that you can connect:

  • Internet Forever + Highway 8GB – you get an additional 200MB of traffic every month. The cost of the package is 600 rubles per month. There are no speed limits;
  • Highway 12GB for 700 rubles per month under the same conditions;
  • Highway 20GB for 1200 rubles.

All services operate on a prepaid basis (you must pay the full monthly subscription fee before network access is activated). Also, as part of each service package, you have the opportunity to use mail.ru mail, Yandex mail and Gmail beyond the traffic limit. It is worth noting that the additional 200MB is only valid when using the Internet from a tablet. In the next section you will find detailed material about

Let's set it up Wi-Fi router for working in the provider’s network using an example Netgear WNR-612 v2. The settings are identical for most router models, so you can configure your device based on this article. Below you will find a video on setting up this router model. And in the second part of the article there is a short setup guide D-Link DIR300.

First you need to connect the Beeline Internet cable to the WAN (INTERNET) port, and the connecting patch cord Netgear router with the computer’s network card in any of the LAN ports. Power supply into the outlet :) Next, launch the browser (Internet explorer, google chrome, opera, mozilla) and enter the address of our Netgear Wi-Fi router into the address bar. Next, you will need to enter your username and password to enter its settings.

See the back of the device for the router address: routerlogin.net

  • Username: admin
  • Password: password

Basic Beeline settings for any router model:

  • Connection type: PPTP, better L2TP, if available.
  • VPN address (access point, server address):
  • tp.internet.beeline.ru— for connecting via L2TP protocol.
  • vpn.internet.beeline.ru— to connect via PPTP protocol.

09/19/12 - I decided to edit the article in order to write what will happen in this video that makes it worth watching:

1. Basic settings for connecting a Wi-Fi router to the Internet: - selecting an access point for connecting to Beeline, - filling in the basic parameters for connection, 2. Setting up a home Wi-Fi network in the Netgear WNR612 router: - coming up with a name and key for the wireless network, - selecting a Wi-Fi connection mode 3. Protecting your Netgear router from hacking, changing the login password. 4. Setting up IP-TV in a Neatgear Wi-Fi router without using a router

Part two. Setting up a D-Link DIR 300 router for Beeline.


Connecting the router is done in exactly the same way as when setting up Netgear, the switching process is described in the first part of this article.

Now you need to go into the router firmware. To do this you need to enter the following data:

  • router address - 192.168.1.1
  • login to access the interface - admin
  • password - admin

If you get to the quick setup page from Beeline, then you only need to perform a few sequential steps to configure the router.

1. "Home Internet"— in this section you need to configure the connection to the network, all the data necessary for the connection is already in the router’s firmware, all that remains is to enter the login and password for Internet access in the appropriate fields.
2. "Wi-Fi"-here you need to configure the router’s wireless network. In the Network Name line, enter a name, for example, wifi_free, and in the Password field, you need to enter a password (come up with a password of 8 characters, for example, a phone number without the eight).

3. "A television"— if you are a subscriber to the Digital Television service, you need to select the router port to which you connected the set-top box. If you watch TV channels on a computer, select “Yes” in the “Television on PC” menu.
4. "Access to the router"— here you need to change the password to access the router.
Next, click the “Save” button to apply the router settings.


After clicking the Save button, the router reboots; the process takes 1-2 minutes.

The latest model of wireless equipment from the Beeline operator is equipped with a more powerful signal transmitter, which also now operates in two bands - 2.4 GHz and 5 GHz, which allows you not to worry that some device will not be able to. The advanced processor ensures maximum reliability of the Wi-Fi signal throughout the entire area of ​​the apartment or house.

The device has the following advantages:

  • 802.11n standard, supported by most devices;
  • maximum transmission speed – 300 Mbit/s;
  • Digital TV connection supported;
  • modern design that does not spoil the interior;
  • convenient interface for .

The 4G router provides network access at speeds of up to 74 Mbit/s. The kit includes a SIM card that allows you to use 30 GB of Internet per month. The subscription fee is 1200 rubles. At night there is an unlimited connection to the 4G network.

Connecting and setting up a 4G/WiFi router

Connecting the router is very simple - you just need to connect the power cable to the Power connector, and the Internet cable brought into the apartment needs to be plugged into the WAN port. To connect the device to the network, you also need to connect the computer to the device by plugging the cable into any of the LAN connectors. The 4G router connects to the computer via a USB connector.

The setup is as follows:

When the router establishes a connection, the message “Internet connected” will appear in the “Status” line. This completes the setup and you can use the wireless network.

Setting up a 4G router is done in the same way.

Software update

The operation of the device is ensured by its firmware, which should be updated in a timely manner to prevent malfunctions in the functioning of the router. The firmware must be updated carefully, and if something goes wrong, you will have to restore the device to a service center.


The 4G router firmware is not updated.

Free WI-FI from Beeline. Internet connection - 4.6 out of 5 based on 34 votes

As for Internet access, the company has extensive WI-FI coverage in many cities across the country. It is worth paying attention to the fact that access to such a network is provided to all users free of charge. And to gain access, you just need to get a login and access password using a special number. To do this, the subscriber makes a call to this short number and receives information to log into the network

We have all long ago appreciated the benefits of accessing a wireless network - the availability of high connection speeds, a stable signal and mobility of use. You don't need to connect a cable to your device, and it doesn't matter how many devices you want to connect. And most importantly, you can use your phone to access the Internet anytime. The Internet access speed will be high and the network quality will also remain at the same level. And most importantly, all this is provided for free, no matter what tariff plan you are on.

How to connect free WI-FI

To connect to a WI-FI connection from Beeline, you need to make sure there is coverage at the place of use. To do this, the user just needs to turn on WI-FI on the phone and find the presence of the Beeline network. If such a network is present, then you can connect to it. Login to this network will only be provided by entering your login and password. So, the connection diagram itself looks like this:

  1. Turn on WI-FI on the phone
  2. Check network availability
  3. Send an SMS message to the number 8402 with text beeline
  4. Get login and password to log in
  5. Enter login and password
  6. Connect

If you did everything correctly, then you will have an Internet connection.

Incorrect login or password

Before entering your password, pay attention to the case of letters; all letters must be entered in the exact case specified in the message with your login and password. It is also worth paying attention to entering numbers; in some cases, subscribers may confuse some numbers and letters, especially for “o” and “0”, in the second case a zero is indicated, in the first a letter.

Problems may also arise with the fact that the user has forgotten his login or password for logging in; by the way, such a login and password is valid for only 3 months, so after this period, you should order new login data by sending an SMS message to a short number 8402 with text beeline.

How to recover the password for Wi-FI Beeline

There are also situations when the network access password has been lost or forgotten. In such cases, you need to perform a simple action that will allow you to recover your forgotten or lost password. The user just needs to write an SMS message with the text pass and send it to the same short number 8402 , you will receive your password in a response message.

You can also order new data with a login and password; for this you should use the usual combination described above. Also, it is possible to use a secure connection, in this case the user must add to the login @beewifi, in this case your connection will be secure.

Network access problems

If you have various problems with accessing the network and you cannot solve them on your own, then you need to seek help from the company’s specialists. To do this, you can use the operator's number 8 800 700 2111 . The support service will help resolve any problems quickly.

You can also ask your question on the company’s official website, through the subscriber contact form. If you have the opportunity to visit the company’s office, you can find the address of the nearest customer service center by following this link moskva.beeline.ru/customers/beeline-on-map/ . To receive advice at the company's office, you will need a passport.