DIY headphone stand made from scrap materials. Samdi headphone stand DIY wooden headphone stands

High-quality headphones are an essential accessory for every gamer, as well as a specialist involved in video and audio editing. Any quality headphones need special care. The main role in this care is played by a good stand, which will allow you to always keep the headphones close to the computer. A good stand, of course, can be purchased in specialized stores, but we suggest that you do not bother with long trips to stores and spend a few minutes viewing this material, in which we will look at a method for making a headphone stand at home.

First of all, let's take a look at the video on making a homemade stand

We will need:
- ruler;
- pencil;
- two metal pipes;
- a small log in the form of a cylinder;
- a square piece of plywood;
- paints;
- saw;
- drill;
- drill

First of all, we must mark the square block in the middle.

Next we need to drill holes on the throws. This should be done on the side parts strictly in the middle. To do this, we first mark the middles, and during the drilling process we wrap electrical tape around the bars so that they do not break.

We got two holes on each block.

We insert metal tubes into the holes made. For greater stability, during the process of assembling the structure, lightly hammer the pipes. This must be done one by one.

Headphone Organizer – irreplaceable thing, which can be easily made at home. Very often, factory-made holder options turn out to be inconvenient or expensive. We have collected for you best ideas And step-by-step master classes with photos and videos. With their help you will learn how to make a headphone case with your own hands.

In the article you will find several options for organizers: made of felt, leather, cardboard, clothespins, fabric and other materials. Choose the most beautiful one and get down to business: the process will not take much time.

Leather

One of the most simple ways make a headphone holder with your own hands - make it in the form of a clamp. Very comfortable and beautiful organizer obtained from a piece of leather.

We will need:

• leather material 2 colors;
• button;
• Super glue;
• tools.

It is not necessary to use genuine leather. You may well choose leatherette or suede for your case. A very thick fabric will also work.

Cut out an oval piece 6-8 cm long from a material of one color. You need to make a decor from a material of a different color. Do it as in the photo - in the form of leaking drops. Glue with superglue. Trim off excess around the edges. Install the button using a screwdriver and hammer.

If there is no button, you can make a button hole in the headphone clip. It's less convenient, but still better than confusing headphones. You can also replace the button with hooks or elastic.

The simple and compact headphone clip is easy to carry in your pocket or bag. It is easy to store cords in it.

Cardboard

A headphone organizer made of cardboard is a simple solution, and even a schoolchild can make it with his own hands. The materials are elementary, so is the technology. Take 10-15 minutes now to avoid the problem of tangled wires.

We will need:

• cardboard;
• any picture (approximately 3x4 cm);
• clip (button, button).

Fold the rectangular cardboard in half. The image on it must be drawn on both sides. Although it would be easier to just glue it. You can even use ready-made stickers or just beautiful material.

The cardboard organizer does not require tight clamps. It is enough to sew a button and an elastic band to it. You can also use a button or thin braid.

Watch this simple video master class, in which the author explains in detail how to make unusual organizers for headphones with your own hands. They look much more interesting than the factory ones. The work will not take up much of your time.

Repeat this step by step instructions simple, and you can come up with many more headphone holders. Select the pictures and go ahead! Cardboard organizers are easy to make from scratch as they wear out. So, if desired, the clamps can be changed at least every week.

Felt

Perhaps the most beautiful headphone cases can be made from felt. They are easy to sew, and you can choose any character as decoration. Children and teenagers may like the animal holders, while adults may like the quiet and comfortable covers.

We will need:

• felt;
• pattern;
• button;
• any decor;
• Super glue.

You can find interesting stencils for felt covers for headphones on our website in the appropriate section. Take kittens, hearts, flowers - whatever.

Felt can be replaced with regular felt thick fabric. True, it will keep its shape worse. Make a pattern big size(approximately 8 cm in length) so that the image can be folded in half. Here are some examples.

A funny clip made only from felt with decor. Fastened with a button.

Several pieces of felt are layered on top of each other and complemented by a piece of leather.

Pouch in the form of a pocket. A narrow strap and a button are used for fastening. This felt headphone holder conveniently rolls up into a tube.

Make your favorite character or animal image. Cut out a rectangular piece of felt and layer the small pieces. Everything is held together with glue. The headphone clip itself is made of a piece of felt and elastic.

There are still a lot of options. The main thing is to take a small piece of felt as a basis, come up with a clip and add decor to everything. The easiest way is to cut blanks for clamps using stencils.

Decorative clothespin

A headphone clip can be made from regular paper staples or crab clips. But they don't look too pretty. But if you take a clothespin as a basis and decorate it, it will turn out really great.

We will need:

• 2 clothespins;
• Super glue;
• paints;
• any decor.

We have previously told you how to decorate clothespins. We recommend adopting one of these techniques.

Glue two clothespins together using glue. Then start decorating. If you decide to varnish your headphone holder, open the clips slightly to prevent sticking.

It is convenient to wrap headphones around this holder. The main thing is not to take paints that stain your hands. Otherwise, the headphones will turn out to be colored.

Knitted

For those who know how to knit, creating such a headphone case will be the simplest task. This soft clamp will not only be beautiful, but will also not damage the wires. It can be made in any color and size.

We will need:

• yarn;
• decorative button.

It is not at all necessary to knit complex patterns and shapes. A simple triangle or stripe works great. The headphone clip can be secured with a decorative button or miniature badge.

The button hole can be knitted separately or a small loop can be sewn on.

By the way, if you don’t know how to knit, you can cut a similar holder from an old sweater or sock and simply make a trim around the edge.

From a kinder egg

Don't throw away the plastic Kinder Surprise egg - you can easily turn it into convenient organizer for headphones. To do this you will need paints and a little creative inspiration. Check this one out short video master class on making a headphone case with your own hands.

As you can see, it's quite simple. Add paints of your favorite color, a little decor - your wires will no longer get tangled.

Fabric and cardboard

We have already talked about how a headphone holder can be made from felt. But look how cool covers made from simple fabric look. You just need to choose the right decor.

In the same video master class you will find step-by-step instructions on how to make a headphone organizer from cardboard and plastic covers. This craft looks very stylish. And most importantly, this option is perhaps one of the most convenient to use. Just wrap the wires around it - you don't even need to fold anything.

We hope you enjoyed these ideas. Complete them with your favorite colors, interesting pictures, and unusual designs. It doesn’t matter what you make the holder for your headphones from: felt, leather or simple cardboard - the wires will no longer get tangled, and your bag will have a new one stylish accessory.

Views: 784

We previously looked at homemade holder for wooden headphones (see).
This time we decided to collect more interesting ideas on how to make a headphone stand with your own hands.

Wooden.

Let's start with a simple but convenient wooden stand.
It can be made from any log without knots, quite quickly and without special equipment.

For greater convenience, cable holders can be installed on the stand.

A more functional holder can be made from wood.
True, it is somewhat cumbersome, and its production requires a number of tools for processing wood.

And another multifunctional wooden stand.
It is designed for several pairs of headphones, plus you can hang a USB cable and other wires on it, which is very convenient.

By the way, many wooden headphone stands are sold in Chinese online stores (for example, on aliexpress). If you don’t want to do it yourself, you can buy ready-made ones; they are not particularly expensive, although not cheap.
You can also get ideas there, as the range is quite good.

Metal.

Well, let's move on.
From homemade coasters I really liked the option made from water pipes.
Perhaps it is not the most practical and will scratch the surface on which it is installed, but it is not lacking in originality. Yes, and it’s not difficult to make.

If the holder seems too bulky and rough to you, you can make an analogue from thin tubes. It looks aesthetically pleasing and takes up less space.

From the constructor.

Of the original ones, I would also like to mention stands made from various construction sets (mostly).
They look, of course, somewhat comical, but just right for children. Ideally, if children assemble the stand themselves, there will be double benefit.

The second option is much nicer and more compact.

Combined.

Last of original stands is combined.
It is made of wooden planks and tubes. This is very easy to make, plus it is comfortable and looks cool.

DIY headphone holders

Whatever one may say, making a stand for headphones with your own hands is not so easy, especially if you don’t have enough tools at hand.
Therefore, in some cases it makes sense to get by with a holder, which is much easier to manufacture. Some don’t even need to be done, but more on them later.

Let's start with the coolest holder.
It is easy to make, very convenient and takes up virtually no space. It bends out of a metal plate, which is not difficult to find.

Instead of such a holder, you can use a regular one stationery clip large size (everything ingenious is simple).
It is no less convenient, plus it is easy to rearrange and does not scratch furniture.

Installing the holder under the table also looks interesting, especially if the system unit is located there too.
You can make a holder for these purposes from anything (a hook made of wire, a plate or something similar). You can also use ready-made plastic or metal coat hooks.

Clothes hooks are also convenient for attaching to a wall, furniture, or even a system unit.

If the space and design of the computer desk allows, then ideal option is the use of full-fledged wall hangers.

A special stand for headphones will be appreciated by music or game lovers. In stores you can find a huge variety of models for different types devices. However, it is possible to make a modern and stylish device on your own. Read on to learn what the stand is for and how to make it yourself.

Why is a headphone organizer useful?

To organize the most comfortable and convenient space for work and rest, every thing should be in its place. Headphones are no exception. The stand allows you to:

• ensure safe and convenient storage of headphones and thereby extend their service life;
• place the device in a visible place and always have it at hand at the right time;
• decorate the room with an interesting and bright design.

The issue of choosing a template should be taken especially seriously. After all, beautiful and unusual design products can make it the highlight of the room. In addition, the design can simultaneously perform various functions: hold the headphones in a certain position and have special holes for storing flash drives, wires and other small items. The following options are popular:

• Compositions from plastic pipes. This method is especially relevant after repairs and replacement of plumbing equipment.
• Metal forging. This type will be durable.
• The wooden stand is convenient and easy to make. It can be made from almost any log that does not have knots.
• From Lego, which you can borrow from children or buy a couple of packs in the store.

In this example, we will consider an interesting and modern version with LED backlight from USB. You need to prepare in advance:

• plank (pine);
• acrylic glass;
• hook for hanging;
• USB controller;
• sheet of paper, pencil;
• ruler;
• adhesive composition;
• drill, plane and other tools.

IMPORTANT! In general, the choice of template and manufacturing method depends on the available materials and tools, as well as the personal wishes of the headphone owner.

How to make a headphone stand with your own hands?

After everything is prepared necessary materials and tools, you can begin the manufacturing process. Follow a certain sequence of actions:

• We will make the basic element of the stand from a piece of wood and acrylic glass. First, cut out two circles of equal size from wood. For example, it can be 18 cm.
• Next, draw a rod on the board that will hold the hook. Recommended support dimensions: 30 cm in height and 5 cm in width.
• Then, using a glass cutter, cut out a circle of aluminum glass. In this case, the diameter must match the wood blank.
• We insert the rod into the base, making holes in all the blanks in advance. All circles should be aligned with each other, and the outer edge should be sanded.
• On an acrylic mug we drill three holes for the LED strip.
• We cut out a ring from the bottom of the circle so that the ribbon can be placed there.
• We insert the rod into the stand, drill a hole in it for the hook and thread it in.
• Next, the elements are glued together using polyurethane adhesive composition and dry for 5-6 hours.
• Then the USB controller is connected to the LED strip using heat shrink tubing.
• A hole is cut out at the bottom of the base for the wire and placed inside the ring. LED Strip Light. It is fixed with glue and the wiring is brought out.

ATTENTION! In the above example, you should not make wooden mugs too small size, since the stand must be stable under the weight of the headphones.

An image or logo on the base of the stand will look unusual. It can be printed on a printer and applied to the top piece of wood. Cutting can be done with any tool that is available. It is convenient to trace the edge of the picture with a wood burning device. Here are a few more tips that will help you get the job done better and faster:

• First, a guideline is drawn on the board using a simple pencil, and only then the drawing is cut out with a jigsaw.
• It is better to use a concave shape of the stand: like an hourglass.
• As a hook, you can buy an ordinary bathroom hook hanger at a hardware store.
• Wooden surfaces require mandatory treatment sandpaper to avoid scratches.
• Wooden elements can be easily painted with stain.
• Pay attention to the glue: it must be polyurethane, not wood glue.
• Remove excess glue in a timely manner so that after drying the product has a beautiful and neat appearance.

REFERENCE! You should prepare two types of sandpaper: coarse and fine grain.

Thus, making a headphone stand is quite simple with your own hands. We hope that this article will be useful and informative. To diversify appearance, you can show your imagination and cut out the holder in the form of an interesting figure. Combinations are also used various materials: plexiglass, metal, plastic and others.

Headphones, as it was called in the USSR, or, more simply put, headphones, will always find application in our everyday life, be it a point on computer desk or maybe around your neck, in easy time jogging.
In any case, when you are at home, then the headphones should have their “legal” place, especially if they are used for local use, that is, on the same computer desk that we have already mentioned. What does your “legal” point mean? This means that the headphones must be in such a position that they are easy to take, while their wires do not bend or sag, and the ear pads do not wrinkle under the own weight of the headphones.

So, the task is easy to understand. Our goal is to implement a headphone stand that meets all the requirements that we listed above, while making it as easy as possible to make it your own with my own hands. It is this option that we will talk about in our article.

The headphone stand will be made of plywood. This material is accessible, easily processed and inexpensive, so we’ll take it as a basis. Let's say more, such a small piece of plywood can be found somewhere in a garage or at a friend's place, absolutely for nothing.
So, we cut out 3 parts from plywood, according to the previously selected pattern. In our case, this is a man with a mohawk. Moreover, please note that the pattern of the outline of a man with a mohawk is installed in the center, and without a mohawk on the sides. For the manufacture of parts will fit jigsaw, with its support you can cut out parts quickly, accurately and beautifully. Next, you also need to cut out a part - a stand, on which our little man holding the headphones will be attached. There are two of them.

Before gluing the part, we sand it with sandpaper to remove splinters and irregularities.

Glue the parts together. PVA glue is suitable for this. Let the parts “adhere” to each other and once again clean the resulting structure with sandpaper. While gluing, clamp them in clamps.

Now we give the material an aesthetic appearance through coloring, that is, to put it simply, we paint the plywood protective coating for wood.

We screw on the plywood – the stand and that’s it! Our headphone stand is ready.

Now our headphones are “tidy” and their stand looks quite interesting.

As you understand, making a stand for finders is not a problem. Although it is not expensive, at least on “Chinese” sites, but nevertheless, a stand made by yourself has a number of advantages. Firstly, you can make the form that seems most aesthetic and pragmatic to you. Secondly, your stand will reflect your “I”, which is absolutely important, especially if you are going to make such a gift for one of your loved ones or acquaintances.

How to glue non-woven wallpaper
Ceiling clothes dryer for balcony
How to make a bell with your own hands
Beaded violet: step by step wizard Class
How to reupholster a chair with your own hands (replace the upholstery)
A plywood house for children to take home (to an apartment). Photos and drawings.