Metacom universal code. Methods for opening a Metacom intercom

Losing a magnetic entrance key is common. And in general, situations in which you need to open the door are different. This prompted the editors of the site to consider in detail how to open the Metakom intercom (the most common brand) without using a magnetic key. Let’s immediately make a reservation that today’s article should not be considered as a guide for novice hackers. This is only information that should be used only in extreme cases and exclusively for peaceful purposes.

In order to open the Metakom intercom, magnetic key not required

Read in the article:

Existing types of Metacom intercom models

There are two types of such locking devices, one of which is equipped with a display, and the other is not. If we talk about the first option, then opening it without a key will be quite problematic. The second option is simpler. There are several methods of opening here, which we will talk about in detail today.

The operating temperature range of intercoms of this brand is very wide – from -45°C to +75°C. Even a completely icy device does not lose its functionality. Supports up to 999 subscribers, and for each apartment you can set your own personal opening code.

Design features, principle of operation of Metakom intercoms

Among the features of the brand, it can be noted that they:

• reliable and vandal-resistant. The outer panels are steel, coated with heavy-duty paint, which prevents damage. The materials and electronics used in manufacturing have high characteristics, due to which the quality of the final product is achieved;
• microprocessors are designed taking into account the latest technologies and are capable of operating under extremes of both temperature and voltage;
• The connection diagram is quite simple - this reduces the cost and speeds up the installation process.

How to open a Metakom intercom: distinctive features of identifiers you need to know

The Metacom identifier, or magnetic key, is a highly secure device that is resistant to high and low temperatures and mechanical influences. Data exchange with the unlocking devices themselves is based on data transfer from the magnetic master key to the receiver. There are currently approximately 260 million unique binary code combinations that cannot be changed throughout their lifetime.

The key can be contactless - it is made in the form of a plastic card or key fob. All identifiers are individual and can only work in the Metacom system.

How to open the Metacom intercom without a key: existing methods

Let us note right away that for different versions The firmware codes for such devices may differ. There are many ways to open a door with a Metakom intercom without using a key. The choice of one or the other will depend on the type of device, i.e. depending on whether there is a display on its panel or not. First, let's figure out how to unlock the Metakom intercom if there is a screen.

Unlocking a door with a Metakom intercom: instructions for models with a display

Related article:

: Vizit, Forward, Cyfral, Eltis, Factorial, Keyman, Blink, Domoguard, T-Guard, Rainmann, Metakom; operating principle of the device; how to do universal key; useful tips and recommendations.

On the Internet you can find many videos of how Metacom intercoms are opened without a key. Of course, the easiest way would be to enter the individual code for your apartment, but owners often forget it (by the way, it is specified in the contract that was drawn up when installing the magnetic lock and speaking handset). This means we will consider other options. There is a universal code for such devices. If the fitters installing the lock were not too meticulous and did not change it, then dial the standard one - 1234/B (call). If it is changed, we move on.

Using the sign at the entrance, we determine the number of the first apartment and dial it. The message “COD” that appears will indicate that everything was done correctly. Now press the numbers 5702 and wait 1-2 seconds. The lock should unlock. If this doesn’t help, move on to more complex combinations - another way.

We dial the combination 65535/B, then the universal code 1234/B, then the number 8. Did the door still remain locked? In this case, the last option is one of those that does not involve reprogramming: universal code 1234/B, then B/6/B/4568.

Intercom "Metakom" without a display: how to open the device without a key

Here are only two options for codes for the Metakom intercom without a screen:

1. Enter the code B/27/B/5702 and wait 1-2 seconds. If this code does not work, move on to the second one.
2. We dial B/1/B/4526.

As you can see, there are significantly fewer options for devices that do not have a display. However, there are codes that allow you to reprogram the device either partially or completely. Now we will talk about them.

How to open the Metakom intercom without a key: codes for reprogramming

There are many different codes with which you can not only open a door with an intercom, but also reprogram it - add a new key to memory, erase the keys separate apartment or even an entire entrance.

Very important! Never use software codes unless absolutely necessary. This can have very bad consequences for the residents of the entire entrance. If such actions are required, it is better to seek help from specialists.

Features available when entering special codes

Let’s immediately make a reservation that if the universal code (1234) has been changed, then you will not be able to enter the settings. If this was not done, the following ciphers apply:

• 65535/В/1234/B/9/3/new universal code/В – changing code 1234 to any other;
• 65535/B/1234/В/B/apartment number/B/0/new password/В – changing the entrance password for the specified apartment;

There are many more system passwords with which you can make various settings for the intercom, but the editors of the site decided not to post them in their article, so as not to lead the Dear Reader into temptation. After all, when using them, you can reprogram the device (erase data on the master keys) so that even an experienced specialist will not figure out how to get everything back. And replacing the intercom is again financial losses for residents of the entrance.

How to open the Metakom intercom with a magnetic master key

To perform this action, you need to dial the command 65535/B/1234/B/B/apartment number - this code allows you to add a new magnetic key or delete all programmed ones. To add, apply the “tablet” to the lock and dial B/7. To delete all programmed chips, instead of B/7, enter B/7/0/11. Such actions allow you to program several intercoms to open with your own magnetic key.

Thus, it becomes clear that the question of how to hack a Metakom intercom without a key is quite simple. But it is worth remembering that this is only possible if the standard universal code (1234) has not been changed. Otherwise, you will have to go with documents and an agreement to the company that installed and services the magnetic locks of your home.

Finally

The loss of a magnetic chip is, of course, an unpleasant event, but not critical - after all, there is a way out of any situation. As a last resort, if the standard universal code has been changed, you can contact a key maker. Today, many of those who do this earn extra money by making universal (master) keys. It won't be too cheap, but you can save yourself a lot of time and nerves. But, we repeat once again, all the information presented above is not intended for breaking into other people's entrances. Remember that you should not joke with the law.

Majority apartment buildings equipped with systems to control and ensure or, conversely, restrict access to the premises. In a situation where it is inconvenient to disturb neighbors, or when they are absent and cannot help, information on how to open an intercom without a key will be useful. This will be discussed further.

If a citizen needs to quickly get into his home, but the unlocking element remains in the apartment or is lost, what should he do? Is it possible to open the intercom without a key? Eat various ways solve the problem of.

Why was this possible?

As a rule, standard factory passwords are provided for any such equipment. Installation specialists use the service menu. Device manufacturers fix the generally accepted digital dialing, which must be changed when installing an intercom. But not every master follows the instructions. Therefore, to open the door, it is enough to know the manufacturer’s code of a particular device and enter it on the panel. But if the equipment broke down and was repaired, then the set of numbers will be different, and this method for opening the door will not work.

Who has access?

A universal intercom key is available in a number of officials, among which:

• emergency medical workers;
• police officers and other law enforcement agencies;
• specialists from the organization servicing the high-rise building;
• postmen.

Some citizens do not want to install tubes in their apartments, but they are afraid that then access for emergency personnel will be closed. These worries are groundless, since doctors have a password to enter, and in an emergency they can easily get to the desired entrance.

Algorithm of actions

But besides the universal code, there are also other methods for opening a door with an intercom without a key. Here are some of them:

1. A man with remarkable strength can lean on door panel and sharply pull it towards you. This simple method may work.
2. If you turn on the electric shock device and direct the discharge to the chip built into the panel, the lock will open.
3. You can bring a burning lighter to the chip and hold it for a few seconds, the lock may open. This method is not 100% effective, but sometimes it works.
4. Hitting the area 15 cm below the panel will reduce the force of the magnet, which will allow the door to open.

The listed methods are not legal. Therefore, if you decide to use one of them, you need to be prepared to bear responsibility. In order not to create problems for yourself, it is better to disturb the residents of other apartments or wait for someone entering/exiting the entrance.

Another option that is increasingly being used to protect housing is. The decision to hire a door attendant is made by the owners of the premises. The duties of the concierge include monitoring not only who comes, but also order, and preventing damage and theft of common property.

Universal key

It is this device that helps overcome a seemingly reliable barrier on the way to the entrance. It allows you to open most electronic intercom locks. Persons performing work in specific areas have a universal code for intercom job responsibilities, requiring access to the entrance.

The master key is made not only in the form of a key, but also as a tablet or keychain. The microcircuit contains information that, when read, the intercom will open the lock. The difference from using a “native” key is that the procedure is longer, 6-7 seconds. You can use the “digital master key” only for the purposes of performing official duties.

How to open the front door using a special code

When installing an intercom, company employees must reprogram it, that is, rewrite/change the service digital dialing. If they did this, then they will not be able to open the door. If the installation specialists did not perform their duties in good faith, the intercom codes can easily be broken. It is enough to dial a certain combination of numbers. Since the answer to the question of how to find out the code from an intercom depends on the device model, let’s look at some of them.

Visit

This is the most common type of intercom in our country, equipped electronic lock. How to open the “Visit” intercom depends on the equipment model. We suggest using the options listed below.

1. Dial the following sequence: 12#345.
2. If the door does not open, enter the code: *#4230.
3. If neither the first nor the second option worked, it means that the door is equipped with more modern model devices. In this case the code from Vizit intercom will be either 67#890 or *#423.

You can also try to open the door using the preset menu. The algorithm of actions is as follows.

1. Press the # key. Wait for a sound signal indicating that you have entered the menu.
2. Enter a set of numbers that installers often use. Usually this is 1234, 1111, 0000. A sound signal will confirm that the code is correct.
3. Dial combination 2#3535 for emergency opening.

If you were unable to get into the entrance using the described methods, it is advisable to wait for one of the residents or disturb the neighbors.

Metacom

A popular model of devices often used in the Russian Federation due to the fact that they work even during glaciation. There are models with and without display. Let's look at several methods on how to open the Metakom intercom without a key.

Method No. 1. Call, number of the apartment from which the entrance numbering begins, call again. When you see COD on the monitor, dial 5702.

Method number 2. Start with the numbers 65535, press the call button. Enter code 1234 and call again, then 8.

Method number 3. Start with standard set 1234, call, 6. Then press call and 4568.

The code for the Metakom MK-20M/T intercom is slightly different. Devices of the specified model respond to the following actions: bell, 27, bell, 5702. Another way to open the door is the following combination: bell, 1, bell, 4526.

Cyfral

This type of device is also quite popular, as it allows you to connect a large number of apartments When there is a number in the entrance that is a multiple of 100, the code from the Cyfral intercom becomes available using simple manipulations.

1. Press the call.
2. Dial one of these numbers: 100, 200, etc., call.
3. Enter: 7272, 7273 or 2323 (one of the above).

Owners of Cyfral CCD 2094 M are wondering how to open this device without a key. Enter 0000 and call. Wait until COD appears on the screen. One of the following combinations will help you unlock the door:

• from 1 to 6;
• 456999;
• 123400, call;
• if after 8–10 seconds the display shows F0, set combination 601.

When the model is marked as 1M, then after entering 0000 and calling, the device will either open the lock or go into menu mode, which will be indicated by ON on the screen. Then you need to dial 2, and the entrance will be open. When you see OFF in the window, you need to keep in mind that the base encoding has been changed.

Eltis

Intercoms domestic production. Electronic intercoms and locks of this type are easy to open. The simplest code for the Eltis intercom is 07054. If it does not work, then dial: call, 100, call, 2323 or 7273. How to open the Eltis intercom if the above manipulations did not work? Then it is recommended to use the algorithm of actions described above, provided for the Cyfral device.

Forward

The methods for selecting the Forward intercom code are generally similar to the process for devices of other modifications. To do this, you need to enter one of the standard factory combinations: 2427101 or 123*2427101. There are models whose keys contain alphabetic characters. In this case, the following codes can help: K557798K or K1234.

There is another option for how to open the Forward intercom without a key. Some modifications have small holes in the chip placement area. It is enough to place a stiff wire, a hairpin or a paper clip there, apply light pressure, and the lock will open.

Rainmann

The device opens after simple manipulations. First, press the button on which the key is drawn, then enter 987654. After the sound signal, dial the numbers from 1 to 6. The appearance of the letter P on the display is a signal to enter the number 8. This is the code from the Rainmann Cd 2000 intercom.

Domoguard

This model of device can also be opened without a key, but you must act quickly. After pressing the C key and the signal sounds, dial: 669900, call, and a number equal to last number apartments in this entrance plus 1. The letter F and two dashes mean that you need to enter 080.

Factorial

“Factorial” is an intercom that opens by entering simple codes, for example, six zeros or a set of numbers from 1 to 6. If nothing happens, press with a delay on 5, 180180, call, 4, call.

Marshal

If you need to open the Marshall intercom without a key, first you should check the number last apartment in this entrance, add 1 to it, and enter the resulting result on the panel. Next, enter either K1957 or K5555.

Lascomex

The peculiarity of these devices is that at the time of installation, a separate code is set for each apartment connected to the intercom. Is it possible to get into such an entrance without a key? There is also a way out. Dial: call, apartment number and unique password. Another penetration option: enter 0000, then 6666. The letter P that appears on the screen allows you to complete the opening of the Laskomex intercom by entering code 8. After some time (up to one minute), the path will be open.

Barrier II, 2M

A device with a mechanical lock is rare, mainly in old high-rise buildings. To open it, use the standard password 1013. In addition, the lock can be unlocked by passing a magnet over the key hole.

Finally

Today, almost every door blocking the entrance to the entrance multi-storey building, equipped with an electronic intercom and locking device. Every person has found himself in a situation where there is no key more than once. If no one is home, you can call your neighbors and try to use the universal code that matches the device model. When this technique does not work, you will have to wait until someone opens the door.

This type of protection from strangers is installed in multi-storey buildings. Sooner or later, apartment residents ask the question: “How to open the Metacom intercom without a key?” But since this type is well protected from burglary, it will be difficult to open the doors. But probably.

Features of Metacom

To open any intercom, you need to understand the principle of its operation. The calling panel includes:

• controller;
• key reading system;
• subscriber intercom;
• and a panel with numbers.

Metacom keys are distinguished by their reliability. It is simply impossible to open a lock from this company with another device. Each key includes a chip with a code that does not change.

The Metacom price is not bad, and the intercom itself is easy to use.

The shockproof case protects the device from hacking. Exposure to weather conditions and temperature changes will not damage the Metacom intercom.

Combinations

Now many are looking for an answer to the question of how to open an intercom without a key. Fortunately, such a method exists. And there are several of them, since different combinations are suitable for a certain model. Although there are also algorithms that can be used for all Metacom intercoms.

There are three types of menu:

1. Custom: “65535” - HF - “1234” - HF - HF.
2. Service: “65535” - KV - “1234” - KV.
3. System: “65535” - KV - “1234” - KV - “9”.

Method 1

What to do:

1. Call button (KV).
2. No. of the first apartment in the entrance.
3. The message “cod” will appear.
4. "5702".

Method 2

What to do:

1. "65535"
2. "1234".
3. "8".

Method 3

What to do:

1. "1234".
2. "6".
3. "4568".

Method 4

(for Metakom MK-20 M/T)

What to do:

1. "27".
2. "5702".

Method 5

What to do:

1. "1".
2. "4526".
3. Present the new key and register it.

Programming

It is not always possible to log in using a universal code. That's why the only solution All that remains is programming and registration of the new code.

What to do:

1. To remember new apartment: “65536” - C - apartment no. - “7”.
2. To remove the old code from this apartment: “65535” - C - “1234” - C - C - apartment no. - KV - “70111”.
3. Removing Master keys: “65535” - C - “1234” - C - “97111”.
4. Identifier record: "65535" - С - "1234" - С - "99".
5. Removing the old identifier: “65535” - C - “1234” - C - “990111”.

Important! Now the most popular solution to situations with closed doors is the universal key. All possible firmware that is used to open intercoms is immediately added to it.

Video

The video below shows several ways to open a Metacom intercom.

Metacom digital intercom is used in apartment buildings residential buildings. It consists of a digital panel and a processor equipped with a power supply. Among users, the question often arises: how. There are two options: using an identifier or a special code. Thanks to its configuration, the device has a good degree of protection against unauthorized entry.

The controller built into the processor allows you to open the Metakom intercom using two types of keys: Touch Memory and Touch Cyfral. The device memory can hold up to 508 identifiers. The door can be opened using a special four-digit code. Users have the opportunity to change program settings according to their preferences.

Distinctive features of Metacom identifiers

To understand how to open the intercom, you need to know the configuration and operating principle of the key mechanism. The keys are developed by Metacom and are intended to work exclusively in this system. The master key is simple in design, different at an affordable price, the ability to carry out repairs, is equipped with a durable housing. The keys of this system are electronic and individual.

The Metakom intercom key has high consumer qualities and is very reliable in operation.

Magnetic master keys are resistant to vibration and shock, and are also not susceptible to external influence electromagnetic field. They can withstand temperature differences from -40º to +75º. The best for manufacturing are RW 1990.

Photo of the calling panel without a monitor

The use of a contact key is based on data exchange. Each is equipped with a chip and memory. It contains code information. Today there are about 260 million possible binary codes. The code cannot be changed during the entire service life.

The intercom key can also be contactless. Its production is carried out according to the generally accepted Em-marine standard. Contactless master keys are used in the Proximity system. They are made in the form of key rings or plastic cards.

Method 1: Codes on the screen

You can open the device using special combinations. The options for such encryption schemes vary depending on the equipment model. For keyless access, you can try the following algorithm:

• Press the call button;
• Number of the first apartment in the entrance;
• Call;
• Wait until “Cod” appears on the display panel;
• Enter digital key 5702.

If the above actions did not allow access, you can open the Metacom intercom of other models using the following codes:

• Code 65535;
• Call button;
• Digital key 1234;
• Call;
• Number 8.

Another keyless entry option is the following combination:

• Enter combination 1234;
• Call;
• Number 6;
• Call;
• Dial digital key combination 4568.

How to open the intercom if the above combinations were not successful? First of all, you need to understand the device model. For example, for the Metakom MK-20 M/T model, you can try using the following keyless access scheme:

• Call button;
• Combination 27;
• Call;
• Code 5702.

Another working diagram:

• Press Call;
• Dial number 1;
• Press Call;
• Dial code 4526;
• Bring the empty identifier to the reader and enter it into the device’s memory.

The video shows how to open the Metacom intercom without a key using the codes:

Method 2: Changing Software Settings

It is not always possible to unlock the Metacom intercom without a key. If the identifier is lost or damaged, you must program a new one into the device’s memory. To do this, you can use the following scheme:

• Code 65535, Call, 1234, Call, apartment number, Call, number 7. This combination will allow you to write the apartment number into the device’s memory;
• Code 65535, Call, 1234, Call, Call, apartment number, call, then the numbers 70111. This combination will delete all programmed master keys for a specific apartment;
• Code 65535, Call, 1234, Call, then numbers 97111. This set will allow you to delete all Master keys;
• Code information 65535, Call, 1234, Call, numbers 99. Entering information will ensure that a new identifier is recorded;
• Password 65535, Call, 1234, Call, numbers 990111. Using the password, the saved ID will be deleted.

The settings menu in Metacom intercoms is divided into three types:

• Service;
• Systemic;
• Custom.

To enter the system settings menu, just dial the combination: 65535, call, 1234, call, 9. To display the service settings menu on the calling panel, you need to dial the following information: 65535, call, 1234, call. To access the user menu, you need to dial the following code: 65535, call, 1234, press the call key twice.

You can open some models of such intercoms using a magnetic master key, the so-called tablet.

Contact picks can fit several mechanisms. You can use such an identifier after entering the code from the universal identifier into the device’s memory. In the future, this master key will be used as a suitable (initial) one.

Another solution to opening a Metacom intercom without an initial master key is to use a manufactured universal identifier. There is no need to select code configurations. The master key has a built-in chip with code information. In their manufacture, factory versions of firmware are used, so in most cases the programmed and provided information are the same.

The video shows how to open the Metakom MK 20 intercom door:

You can use the secret combination that is in every intercom Quite often a problem occurs when the keys to the intercom are lost or forgotten, however, there is a way out, this is to enter a special code that was set by the manufacturer of this intercom device. All the details are below.

Let's figure out how to open the intercom

An intercom kit is necessary to ensure security in the entrance apartment building, since criminals usually wait for the victim in open, unprotected entrances to get into the apartment. The intercom also ensures order and cleanliness in the entrance, as it scares away lumpen and marginalized people.

Each company producing this product, competing with other companies, strives to secure its device and develops management software that is different from others, naturally, entering its own combinations of numbers

You need to know that entering a special PIN code with mercenary intentions is punishable by law.

Modern intercoms not only have the ability to communicate and record a conversation, but also video surveillance, which provides 100% security. Many intercoms are equipped with a special code so that you can open (if you forgot or lost the key) in emergency situations (unlocking), as well as a loud emergency notification system when evacuating people from a building during a fire, earthquake and other situations.

When using the intercom, you should adhere to the following instructions:

1. When leaving the entrance, you need to press the button under the screen and wait for the sound signal, only then exit.
2. When entering the entrance, you need to lean the key chip against the reading panel of the intercom device, when a sound signal (pulse) sounds, you can unlock front door.
3. After leaving or entering the entrance, you must not help the door close; hydraulic closer will close itself.
4. If you push and help the door to close, this can lead to damage to the closer.

Basic constituent elements intercom is: company name plate, call unit, primary power source, independent switching unit, independent electromagnetic lock, which attaches a magnet to the door plate, door closer, call button, apartment blocks, keyboard.

Intercoms are divided into multi-subscriber and small-subscriber, according to technical device, multi-wire and two-wire. In the age of new technologies, there are intercoms that receive and transmit signals using Wi-Fi, based on optical fiber.

Don’t panic if you don’t have the keys to the intercom with you, or it has become demagnetized, or the encoding has been lost (recoding and programming is required). You can deceive any intercom using a universal key chip, which is available to emergency doctors, police, post office workers (postmen), house management workers, and Internet communications (Rostelecom). These keys are made in the form of a special tablet, radio key fob, two-pin key and are issued legally to employees of special services.

Description of the method: how to open the Metakom intercom

The domestically produced Metakom intercom is used for apartment buildings to protect against unwanted guests. What should I do to open the intercom? Is this even possible?

Intercoms are produced by many different companies, both in Russia and around the world. Therefore, there is no single (universal) set of necessary numbers on them

The main thing is not to break the screen, but to make (restore) the lock by entering a combination.

To open a Metacom intercom without a screen, you need to dial a special combination consisting of several numbers and letters. Firstly, press the button corresponding to the apartment number - B. Secondly, dial code 5702.

If the intercom does not open, you can try entering the codes:

• 64434;
• 1256;
• 1256;
• 4978.

If the Metacon intercom series MK-20M/T, forward or Pro, then you must enter similar combinations or PIN code (B + 27, B + 5702). It takes a very long time to go through all the codes and you can either wait until someone comes in or out of the entrance, or call the neighboring apartment and say that you are a neighbor and forgot the keys. And remember that the use of all frauds with mercenary or predatory intentions is prosecuted by law.

Example: how to open an intercom Visit

The Visit intercom is one of the most reliable devices and is adapted to such harsh conditions as low and high temperatures, wind, rain. The intercom housing has anti-corrosion coating, which ensures reliability.

"VIZIT" is factory set to 12#345 or *#4230. But recently released models can be opened by entering 67#890 or *#423

An intercom of this model works in humid climates. Average term operation – about 10 years.

Intercom Visit in an emergency can be opened with a special code; you should log in to its menu and dial #999. After 2 signals sound, enter 1234. You need to wait a little and after a short signal, dial 2#3535.

If, after entering the combination 1234, there was no short signal, but a signal similar to a two-tone or others was heard, then you can enter other combinations:

• 6767;
• 3535;
• 12345;
• 11639.

After dialing the combination, you must enter 2#3535. Relevant for the following models: Vizit N-100, Vizit SM-100, Vizit BVD-341, Vizit BVD -313 and others.

How to open the Cyfral intercom

Digital has many models: Digital INTEL, Digital CCD-20.40, Digital CCD-40TS, Digital CCD-2087.2TV, Digital CCD-2087.2T, Digital CCD-2087.2T R, Digital M-10MR, Digital M-10MT, Digital M-20MTV, Digital M-20MZV.

To open the Cyfral intercom, you need to have a special master key or know the password

For a regular model Cyfral intercom, to open it without a key, you must enter the following numbering:

• Call + 100 + 2323;
• Call + 200 + 2323;
• Call + 300 + 2323;
• Call + 400 + 2323;
• Call + 500 + 2323;
• Call + 600 + 2323;
• Call + 700 + 2323;
• Call + 800 + 2323;
• Call + 900 + 2323;
• Or choose the following combination Call + number + 2323 or 7272, 7273.

It takes time to find the code; it’s better to call your roommate. For the Cyfral M intercom, it is easy to open using the combination Call + 37 or Call + 3792. The Cyfral intercom of the CCD-2094.1M series is opened using the code Call + 0000, after which the message ON will appear on the display, you must enter 2.

If these operations do not work, then the factory access code was changed by housing and communal services employees.

If you are with a tenant of this house, you can ask them for the access code if the key has been lost. The intercom model Cyfral CCD-2094M can be opened by dialing the combination 0000 + call, after entered, the inscription cod will appear on the display. 123456 + call, if it does not work, enter 456999 + call, or 123400 + call, after which f0 appears on the intercom display, then enter 601.

Hacking the intercom model Rainmann (Rainmann) 2000 is possible by entering the combination - key + 987654, after the double beep of the intercom, enter 123456, after which P will appear on the display. The letter P on the display monitor indicates that you have entered the service menu, in which you can control using numbers and program the code yourself.

A single number is entered:

• 4 – block and disable the Rainmann intercom;
• 6 – turn off Rainmann;
• 8 – open (the door is demagnetized).

Rainmann CD-2000 and AO-3000. In order to open the 2000th model, you need to click on the “key”, then enter the code “987654”. After this, the intercom will beep and you need to enter the numbers “123456”. If the engineering menu is available, the “P” icon will appear on the screen. Now, to unlock and open the door, you need to press the number 8

The intercom of any DomoGuard model can be opened by entering the combination C + 669900 + call + enter a number that is 1 unit greater than the number of the last apartment in the entrance. After entering the combinations, F will appear on the intercom display, which will mean exit to the service menu. After this, dial code 080 to enter a new key 2, 2, 2 into the intercom memory. To disable the door lock - 071.

Instructions: how to open the Eltis intercom

All Eltis intercom models open after entering a special combination, however, if the entered combination does not open the door, then the factory settings have been changed. The Eltis intercom can be opened by entering a universal code that can be used to deceive the security device.

You need to press and hold the call key for 20 seconds. A five-digit code will appear on the equipment display for a while. Then this combination will disappear, so you need to remember it. This password will allow you to enter the settings menu

• Call + 973;
• Call + 7456;
• Call + 2323.

With the same combinations, in which the call button is pressed at the beginning, you can open the following types(access intercoms) – Tehkom, Stroymaster, Marshal, Belsplat, Kamsan, Condor, Lock, Poly, Filman, Polylock, Smartel, Laskomex, Modus, Polis and others.

Intercom code

Intercom brand Factorial different models can be opened without a key by entering a special access code software– 000000 + 123456, 5 + 3453475 + call + 7 + call.

Houses equipped with intercoms are found everywhere, but few people know how to open them without a key.

The Keyman intercom can be opened by entering – K + 100 + 789, after the signal has sounded, enter 123456. After the Keyman P is displayed on the display, which allows you to enter the menu, enter 8. If the intercom has a touch screen, then in winter you can open it by Applying a lump of snow to the screen, hypothermia can damage the intercom.

It is also possible to open the device using the piezoelectric element of the lighter, which is applied to the key space, but this does not always work and is weak.

Intercom Barrier II, 2M and 4 can be opened by pressing 2 + 4 or 2 + 7. You can also magnetize the place where the key is applied and magnetized using a magnet. In the same way, you can open the Arcades intercom with an empty plastic key.

The Raikmann and Rainmann and Smartel intercom can be opened as follows:

• Key + 321654;
• After the beep, enter the numbers 123456;
• When P appears on the display, enter 8 or recode with a shocker or stun gun, which with its impulse can turn off the intercom device.

Blink intercom is the only audio intercom installed in Belarus, Ukraine, Kazakhstan and you can open it using a D9-0.1, 6F22 battery, which we put in the key slot. And the intercom Kron, Pierrs and Safe can be opened using the factory combination 951. The intercom Pier 1000 Micro can be opened using the factory access code - 12345678 + K + 1234 or 8310649 + entrance number.

You should know: how to find out the code from the intercom

An intercom is the most reliable security device multi-storey buildings, garages and private houses. Residents of the building or the owner of the garage must know the password and secret codes for emergency opening of the intercom. This password is used if the intercom key has been lost or forgotten.

If at the entrance you find that there is no key to the intercom, first of all it is better to contact your neighbors

If the key to the intercom is lost and the password has been forgotten, it is not possible to open the door, then you need to call the housing and communal services, service or company using the telephone service center, who installed this intercom device so that the master could unlock the combination locks. Remember that unauthorized entry and hacking of the intercom in the entrance of a house on someone else's territory is responsible for your actions.

Why shouldn't you enter codes and physically try to open the intercom without a key? There is an instruction that states that during operation of the intercom it is strictly prohibited to cause any mechanical damage to the call unit, handset, electronics unit, electromagnetic lock, opening button and intercom body various items which may lead to damage to the device or its individual elements.

Mechanical damage also includes wiping with snow, dousing with water, heating with fire, dousing with paint and other solutions, using a magnetic key using an electromagnet, tearing out buttons, repairing the device yourself or encoding it.

It is prohibited to independently perform recoding, unlocking or other actions by a person who is not a service worker for the intercom device. Do not pull the door behind you, which can lead to damage to the hydraulic closer. The speed of closing the entrance door is set by the master, depending on design features doors and adjustment screws.

How to open an intercom without a key (video)

In conclusion, it is worth noting that it is prohibited to place foreign objects under the door from the inside or outside that would interfere with the door closing independently and lead to unauthorized entry of strangers into the territory.