Tools and accessories for installing doors. Tools and materials for installing a metal entrance door
If you have decided to install an interior door yourself, without resorting to the help of specialists, then you should prepare for this matter thoroughly. This is especially true for the availability of tools that will be required for installation door leaf. Installing interior doors with your own hands, although not a difficult task, is, however, quite painstaking, and requires free space and everything necessary for hand tools. Especially if you took on the installation without professional skills or assistants.
The process of installing an interior door
Direct installation of the door leaf can be divided into several successive stages, each of which requires the use of the necessary tools for installation.
Let's take a closer look at each of the stages, and also look at what tools are needed to install interior doors on each of them:
- Mounting the retaining door frame.
- Attaching the hardware kit to the box and canvas.
- Finishing the finished doorway.
It is worth noting that completely different tools can be used for each stage of installing an interior door, which is why you should take care of their availability and readiness in advance.
Door frame installation
The first thing to start with is installation new door, is the stage of mounting the box. In this case, you should have the following tools at hand to install interior doors:
Read also
Installation of a swing interior door
At the first stage, installing the frame of the door frame, this tool will be enough; in addition, you may only need a saw or hacksaw if you do not have an electric jigsaw.
Jigsaw design for door installation
Once all the tools are prepared, you can begin installing the door frame, if load-bearing walls interior doorway made of brick or other stone, then using a hammer drill will be very convenient to make holes in them for fastenings. Watch the video for a review of the tool for installing interior doors.
Installation of accessories
As soon as the frame installation stage is completed, you can smoothly move on to preparing the tool for hanging fittings and subsequent installation of the door leaf. In this case, you will need to leave or add the following devices for installing interior doors:
- In this case, we no longer need a pencil, tape measure, square, or ruler.
- Drill, drill, screwdriver, saw and foam gun - we will still need these elements, so we won’t remove them far away.
- Hammer and set of chisels for additional work.
Installation door handle on the interior door
Depending on the complexity of the fittings, this set can be reduced or additionally added to it are small screwdrivers, which may be required when installing the lock. In this case, we will analyze the use of each tool separately.
We will need a pencil and a measuring tool to mark and accurately measure the location of future fitting grooves and the location of the structure.
The lock is inserted using a drill and a special drill in the form of a feather, which makes a uniform, neat hole in the door leaf.
Drilling a hole for a lock in a door
A set of chisels and a hammer are used to prepare neat holes for door hinges. In this case, there is no way to do without this tool. 
It is worth noting that all the necessary tools that may be required to drill holes are not always at hand. In this case, a screwdriver can replace a drill and screwdriver sets.
Read also
Selection dark doors under bright interior apartments
Subsequent finishing of the opening
In the process of performing the final stage of work, namely attaching the cash strips, we will need the following tool, which you have already used before:
In this case, no special equipment is used; you can install an interior door yourself with only a few simple available tools.
It is extremely convenient to prepare the solution using a hammer drill, since manual mixing of the mixture requires significant physical activity. In addition, when using a high-quality tool, you will significantly save time and, even more so, get a homogeneous mixture that will fit better on the wall surface.
The process of puttying a door slope
The solution is applied using a trowel and spatula. With help building level it is necessary to evaluate and check how well the work is done. After the mixture has dried, you can begin painting. To do this, use a brush, a roller and a paint tray.
Final stage installation work– this is the fitting and fastening of platbands. You can cut them to size hand hacksaw on wood or electric jigsaw with the appropriate file.
Buying the interior doors you like is only half the battle: these structures still need to be installed correctly. The actual installation of interior doors with your own hands is very painstaking process, requiring patience, time, as well as the availability of equipment to install the structure and the ability to use it.
All kinds of devices for installing interior doors must be prepared in advance, because if you purchase equipment as needed, this can waste a lot of precious time. In addition, purchasing a tool in a hurry poses a serious danger: there is a high probability that you will buy a low-quality installation kit.
In order to clearly understand what tools are needed, you should think through the entire cycle of work, from marking to adjusting hinges and finishing door slopes. A standard door installation kit, containing a dozen items, will not be able to help with all these manipulations. Therefore, it is prudent to prepare tools for installing doors according to a pre-thought-out list, which should be compiled taking into account the entire cycle of work.
All the tools necessary for installing interior doors can be divided into two groups:
- electrical goods;
- hand tools.
- Hammer.
During construction, this tool is simply irreplaceable. During the installation of interior doors, it is used to level the opening, drill holes for the anchor dowel, etc. - Drill.
This power tool is used for drilling mounting holes, screwing screws, and attaching hinges. Before starting work, make sure that the drill inserted into the drill chuck is tightly secured. If the drill is poorly secured, it may fly off during operation of the tool and damage the door leaf or cause harm to the master. - Jigsaw.
A tool whose main purpose during the installation of a door structure is to perform wave cutting of the platbands. - Bulgarian.
If the wall has a strong curvature, it can be used to adjust the platbands. - Fraser.
This tool is used for cutting hinges and door locks. - Electric planer.
This tool is used to adjust platbands and extensions.
Hand tool
- Marker or pencil (it should not be too hard, otherwise it will leave indelible marks on the varnished surface of the door leaf or trim).
- Tape measure (it is advisable to use a 3 or 5 meter measuring device).
- Vernier calipers with depth gauge. This door installation tool is used to measure the mortise depth door lock, marking for fittings, etc.
- Chisels. Used for inserting hinges and other fittings.
- Bubble level (optimal length – 50 cm).
- Steel measuring ruler.
- Test metal square. This device is used for checking angles, as well as setting up electric tools.
- Mallet and hammer.
- A set of screwdrivers is needed to install hinges, awnings, locks, etc.
- A miter box and also a saw.
- Gun with polyurethane foam.
Consumables
The set of consumables is represented by the following names:
- peaks and chisels for a hammer drill.
- petal end circles.
- jigsaw files.
- cutting wheels mounted on an angle grinder.
- drills.
- masking tape.
In addition, self-tapping screws are needed to install hinges, door locks and trims.
Equipment
Often, interior doors offered to the buyer are sold without hinges and a lock: these accessories will need to be purchased separately.
Additional accessories
TO additional work Activities associated with the installation of interior doors include adjusting hinges and finishing slopes.
When adjusting the hinges, the tight fit of the door leaf to the frame is checked and, if necessary, the fasteners are either tightened or loosened using screwdrivers. To complete this stage of work, you only need a set of screwdrivers.
To plaster slopes you will need a kit containing the following devices:
- spatulas;
- solution container;
- Master OK;
- a set of brushes and rollers;
- grout kit.
Of course, it is best to use professional equipment to install interior doors: it is tested and reliable, and therefore serves as a guarantee of high-quality work. But, unfortunately, the cost of such a tool is too high.
Therefore, home craftsmen often have to do this Difficult choice between dear professional equipment and an amateur set that does not require large expenditures.
Choosing and buying the door you like is quite simple, but installing it correctly is a more complicated matter. To carry out this process competently, you need to have everything necessary tools and fixtures, and also have some construction skills. Sometimes you may need special equipment - you also need to have it on hand just in case. So, what should be available for quality installation door panels?
Installing interior doors is a troublesome task, and to accomplish it, it is not enough to have one door and a pair of screwdrivers. It is advisable to have a whole set the right tools to do this job well.
So, what are the basic tools needed to install door panels:
- Drill– needed to drill the necessary holes of different sizes, attach hinges, screw in screws;
- Hammer– with this useful tool you can increase or level the door span, drill holes for dowels and perform other necessary actions;
- Jigsaw– with its help, the process of removing trim and trim becomes simple and easy (mainly used where it is difficult to use a saw);
- Manual milling cutter(plus cutters) – “helps” to prepare places for door hinges and locking mechanisms, removes excess wood from the door or door frames;
- Miter and circular saw– these types of saws allow you to make both even longitudinal cuts of the material and at a certain angle;
- Bulgarian– used to adjust platbands if the walls are very crooked;
- Screwdriver with attachments– allows for fixing screws and other fasteners.
But in addition to electrical devices and equipment, when installing doors you cannot do without hand tools, such as:
- Regular hammer– needed to drive nails or other parts;
- Construction knife– it’s convenient for them to trim off everything unnecessary;
- Chisel– perfect for inserting door hinges and other fittings;
- Screwdriver Set– will be needed for fastening various parts;
- Building level– an ideal “helper” for checking the evenness of the surface;
- Roulette– measuring tool (it is advisable to use a three- or five-meter tape).
If there is no screwdriver, it is advisable to have a Phillips and straight screwdriver in the “tool” box, which will help secure all the necessary elements.
Auxiliary devices for installing interior doors
While working with interior doors You may need not only the main tool, but also some auxiliary devices, as well as consumables.
Additional accessories required for door installation:
- Bubble level - used to measure the angle of inclination of vertical or horizontal surfaces;
- Steel ruler – very convenient for carrying out any small measuring work;
- Test metal square - may be needed when setting up an electric tool, as well as for measuring angles;
- A gun filled with sealant or polyurethane foam is very convenient when applying sealing agents;
- Spacers as long as the width of the doorway;
- Pneumatic wedges are special wedges that are air cushions that can be used as supporting ballast while working with the door;
- Simple pencils or markers - you should not select these devices with a very hard core, otherwise the marks made will be difficult to erase.
In addition to additional tools, you should also take into account the fact that you will need various consumables, without which you will not be able to get the job done.
What else should you have on hand:
- Chisels and files for hammer drills;
- Drill bits;
- Milling cutters for router;
- Grinder circles;
- Masking tape;
- Polyurethane foam or sealant;
- Self-tapping screws for installing a lock, trim and door hinges.
By the way, there are craftsmen who fasten platbands with finishing or liquid nails without using self-tapping screws. You can also try special micropins in action, which are attached with a pneumatic gun.
When working with door slopes and plastering may require spatulas, brushes or rollers, containers for mortar, and grouting agents.
Necessary tool for inserting locks when installing doors
While cutting locks into door structure, also cannot do without special tools. Some of them have already been mentioned above, and some devices will be discussed for the first time.
So, to embed the lock you will need:
- Vernier calipers - this tool is needed to adjust the depth of insertion of the locking mechanism, as well as to apply markings for fittings;
- Tape measure - it is used to determine the places where the holes for the lock will be drilled;
- A screwdriver or drill is perfect for securing lock elements: handles, latches or escutcheons;
- Milling cutter - will help prepare holes for the future locking mechanism;
- Hole saw - needed to make holes for the handle;
- Feather drill - you can’t do without this device when cutting out holes for the lining and latch;
- Wood core bit for drill;
- Ruler, pencil, tape measure, set of screwdrivers;
- Chisel and hammer;
- Self-tapping screws.
By the way, special sets are available for sale containing all necessary equipment for installing locks.
Competent and professional door installation
It often happens that people doubt their abilities and do not risk installing doors themselves. In this case, professional work comes to the rescue. Specially trained people quickly and efficiently install the door, cut in the lock, and adjust the door leaf.
However, if a person has some carpentry skills, you can try to install doors on our own, but for this you need to purchase quality tool. Now you can purchase professional sets of devices for such work.
These kits usually contain all the necessary fasteners and supplies that you may need. They also contain very detailed instructions, which can be done by a person even without special knowledge.
Advantages of this set:
- Everything you need is at hand;
- The kit is suitable for any type of door installation work;
- There is no need to drill through the door frame;
- Many elements are flush-mounted fixtures;
- The decorative finish of the door will not be damaged one bit.
Assemble the door yourself or use the services of a professional – the choice is yours.
Professional tool for installing doors (video)
When choosing a tool, you first need to figure out what work needs to be done. If you want to do everything top level, then it is better to buy professional kits. If the work is one-time and you don’t want to spend a lot of money, you can think a little and replace some of the devices with simpler ones. All in your hands!
Installing doors requires knowledge and experience. This alone is not enough for high-quality installation door block. This matter cannot be accomplished without special devices.
Even to an experienced master You cannot do without special devices for installing doors.
Let's talk about what accessories for installing doors are necessary for any professional or amateur craftsman.
Buying a door of any type:
- entrance or interior;
- wooden or metal;
- swing, sliding, accordion, etc.
Do not forget that in addition to the door leaf there is a frame, an opening and fittings, which also require the attention of a specialist during installation. There are door models equipped from the factory with built-in hinges, locks, and handles. But this is rare, and the model costs much more. Then you need to install all the components yourself or invite a specialist.
Every man should have a magic suitcase with gadgets in his arsenal. Any professional in his arsenal has a bag with the necessary equipment for installation. Let's take a look at what's included in this bag and what it's intended for. House master could purchase the necessary equipment to install the purchased door.
Overview of door installation devices
The master needs different instrument for installing doors, which will be discussed below.
Power tools
Power tools include devices that operate on mains power and perform all work quickly and accurately. To install any door block you will need:
Perhaps this is the entire set of power tools. If any of the devices from the list are not at home, you can purchase them for rent. It is better to buy such a tool, because it may be needed for other tasks around the house.
Hand tools and related accessories
Many power tools can be replaced with common tools that you most often have at home. They will help you install any element, but they will require more time and patience:
- Screwdrivers different types help to screw any fasteners into pre-prepared holes.
- A chisel and chisel are useful for installing a lock or hinge. They can be used to carefully hollow out holes and make indentations in the canvas. Just take your time so as not to spoil the product with unnecessary actions.
- A hand saw is required for sawing off excess from wooden blanks.
- Tape measure, angle, plumb line, level - these devices are also necessary to correctly take all measurements and position them evenly door block in the opening or install fittings.
- Many craftsmen advise using devices to hold the door leaf in a stable position. When installing a hinge or inserting a lock, you need the help of a second person to prevent the door from falling. The assistant can be replaced by a workbench or a limiter where the blade is inserted.
We talked about a device for installing doors and all components. Make sure you have the listed elements so that the installation goes quickly and successfully.
The new door is sold without fittings. , cutting in hinges and locks is not difficult if you have the tool. Additionally, you will need devices to help wedge the canvas in the frame, as well as consumables for final finishing. It is better to purchase a branded tool, because the quality of the work performed depends on it.
Before installation, it is worth considering future actions. Assessing the situation will help determine what tools are needed and what additional equipment will be needed. Forethought will speed up installation process, will save you from endless shopping trips to buy a drill required diameter or other consumables.
First, before installation, they inspect the household tools that are available. Check its performance. A power tool lying around idle could become unusable due to exposure to dampness and dust. After checking the functionality, they make a list of necessary purchases.
Preference is given to high-quality power tools. It’s not worth overpaying for professional-class units, but it’s also better to avoid cheap Chinese counterfeits. It is optimal to purchase a branded semi-professional class tool. It will come in handy more than once at home in the future.
Power tools
When performing complex work related to dismantling an old door frame or cutting grooves for fittings, you need a power tool. It will not only speed up installation, but will also help get the job done efficiently. Depending on the tasks at hand, the following is required: tool For :
- Miter saw
will be useful during installation. With its help it is easy to make longitudinal cuts, trim elements, reduce the size of the sash, adjust and
- Hammer needed when dismantling an old door frame. Usage different sizes a chisel and a drill help to quickly make holes for anchors and break off part of the wall when...
- Electric drill drill holes for self-tapping screws, door handles, select a groove for the lock if you don’t have a router at hand. It is important to immediately think about what drills are needed for.
- Screwdriver with a set of attachments is not an essential power tool if you plan to install only one door. A dozen screws can be tightened with a screwdriver.
- Jigsaw indispensable during installation,
- Bulgarian necessary when . Additionally, diamond-coated concrete discs are purchased.
- Using for simplifies the process of selecting grooves for fittings. Use a power tool to remove the excess layer of wood. You will additionally need cutters of different diameters.
The owner will no longer have the power tool lying around idle. It will come in handy when hanging shelves, cutting wood pieces and other household work.
Hand tools
Without hand tools for not to be dispensed with. Even if you have electrical units at hand, it is impossible to dismantle the box without a mount or hammer in a nail without a hammer. You will need:
- Marking pencil. It is advisable to use a soft rod so that when pressed it does not leave dents on the varnished surface. You can take a marker, but it is difficult to erase after marking incorrectly.
- Chisel- one of the main tools for helping to select recesses for fittings.
- Hammer needed to drive nails, dowels, cut out indentations with a chisel, and destroy a wall with.
- Plumb and level will help make it smooth. If the box is skewed, the sash will sag. A laser or bubble level, 50 cm long, is suitable.
- Hand saw for wood will replace a jigsaw or circular saw. However, sawing lengthwise wooden blank will not work. A hacksaw will help to shorten the elements, adjust the length,.
- Scrap will simplify the dismantling of the old boat. It is more convenient to use a pry bar from a car mechanic's kit.
- Mounting gun is in demand when filling gaps between the ends of walls and door frame. You can save on tools if you buy cylinders with a tube attachment for manually squeezing foam.
- Screwdriver Set will replace the screwdriver. It is convenient to use the handle with interchangeable attachments of different shapes.
- Miter box helps to do correct cut at the desired angle of the box elements and platbands.
Hand tools are fully capable of replacing electrical units, but will take more time.
Consumables
Consumables are more convenient for a beginner to use special fasteners for, complete with mounting kit step by step instructions. The set consists of two parts. One of them is fixed to the inner plane of the box. The other is attached to the ends of the walls doorway. After installation, the fasteners adjust the position of the box without using spacer wedges. The frame is securely fixed in six places. The fastener is hidden, since no visible through holes are drilled in the box.
To fix the door, if special fasteners are missing, you will need spacers The length of the elements corresponds to the width of the doorway. You also need wedges made of wood or plastic. It is better to use pneumatic wedges to support the ballast of the structure.
Consumables are attributed to jigsaw files, chisels, drills, cutters, grinder discs. Can't do without polyurethane foam and self-tapping screws. can be attached liquid nails or micropins. In the second option, you will need another tool - a pneumatic gun.
Optional equipment
When all devices in the form of wedges and spacers are removed, what remains is finishing touch– sealing slopes. If you need to apply plaster and paint, use additional equipment:
- a set of spatulas of different widths;
- bath for mixing the solution;
- kit paint brushes and rollers;
- devices for grouting plaster.
When the whole instrument and consumables at hand, you can safely begin installing the door.