How to make a kitchen apron with your own hands. Do you know how to make a kitchen apron with your own hands (45 photos)? MDF kitchen aprons

The comfort of a living space largely depends on how well our life is organized in it. The most important place among auxiliary premises occupied by the kitchen. We love it most of all, because it is there that we enjoy deliciously prepared food. Important role The apron plays a role in the kitchen interior.

photos

An apron is a section of the wall between the lower and upper tier of kitchen modules. It protects the wall from dirt, just as work clothes of the same name protect a housewife's suit from stains. It largely determines how beautiful and tidy our kitchen looks, and how harmoniously the individual modules fit together.

photos

How to choose

Since the apron must be primarily functional, the materials for its manufacture must be selected with such characteristics that they protect well problem areas on the walls and were easy to clean. This means that when choosing materials, you must pay attention to their resistance to temperature changes and moisture resistance, as well as how easily the surface can be cleaned of contaminants deposited on it.

Installation protective coating First of all, it is necessary near the sink and stove, since numerous splashes of water and grease can seriously stain the wall. Product processing processes also take place in the work area, which have a damaging effect on surrounding surfaces, so it is better to place protection along the entire row of kitchen furniture.

In addition, the apron also has an aesthetic purpose. It is needed in order to combine the top and bottom rows into a single whole and create a coherent kitchen ensemble that will create comfort and delight the owners.

Features and Benefits

When we think about what our kitchen will look like, we must take into account its features. If the windows face north or are small, there will be a lack of light in the room. This means that the color scheme should neutralize the darkness and it will be necessary additional lighting. On the contrary, if the kitchen is very light, then the shades of the furniture and walls may be darker.

When selecting materials for making a kitchen apron, you need to take into account the advantages and disadvantages of each of them. Essential criteria for evaluation are ease of care, heat resistance, and moisture resistance.

Advantages traditional materials in their time-tested practicality and relatively low cost. Non-traditional materials make it possible to implement various bold projects, and at the same time, any innovations can be very convenient for use in everyday life.

Each material has its own installation characteristics. Tiles, mosaics, natural and artificial stone require preliminary preparation surfaces. When installing such an apron, there should be no furniture in the kitchen. Glass and panel protection is installed after furniture is installed. But the specific installation location of the apron must, in any case, be determined with maximum accuracy, taking into account all cabinets and equipment.

Materials

A wide variety of materials can be used to make a protective coating. different materials. The most common are ceramic tiles, PVC, MDF and chipboard panels, tempered glass, and mosaics. When choosing a material, the fact from which material it is made is of great importance. kitchen furniture. The apron is made from the one that best matches it in texture and color.

Ceramic tiles are the most popular material. It fits easily into any kitchen as there are so many tiles available different sizes, colors and textures. It tolerates temperature changes well, is durable, is not afraid of moisture, and is easy to clean from dirt. With high-quality installation it lasts a long time.

Porcelain tiles are stronger in properties than ceramic tiles and have higher moisture resistance. There are tiles large sizes, there will be fewer joints between them, so less dirt will accumulate in the seams. If a porcelain stoneware countertop is mounted on the work surface, then it would be logical to make the apron from the same material.

Apron from natural stone It will look good with a stone countertop. Since this material is quite expensive, it is rarely found in kitchens.

But artificial stone is quite popular. It is much cheaper than natural, but looks no less noble. Since not only countertops, but also sinks are made from such material, it becomes possible to create magnificent kitchen sets. Such sets last a long time, they are easy to care for, and the plates are well connected to each other.

Mosaic splashbacks There are both single-color and multi-color. Even a picture can be assembled to suit every taste with a variety of patterns. It all depends on the plans of the owners. Mosaics can be made from various materials in all sorts of combinations. Ceramics, glass, porcelain stoneware, natural stone, metal, mirrors and other materials are used. The service life of the apron and its practicality directly depend on the quality of installation and grouting.

MDF and PVC panels are low cost and look good thanks to the variety of patterns that can be applied to them. Colors and pictures can imitate various materials: tiles, mosaics, wood, brick and stone. However, such panels are not very practical as they are easily damaged, but they are quickly installed and easy to replace.

Metal surface the walls will look interesting if the original design idea is realized. This apron looks unique and is quite practical, as it is not afraid of high temperatures and can be washed well using products that do not scratch the surface.

Glass aprons, contrary to the belief that they are fragile and brittle, are quite practical. Tempered glass can withstand high temperatures. If it has a smooth surface, it is easy to clean. Glass can be frosted or transparent, with or without a pattern. The transparent protection on the wall can be attached in such a way that it can be easily removed, and then the kitchen can be diversified by changing the patterns underneath it. There you can place photographs and drawings, which can look different thanks to the variety of LED backlight. These aprons are very beautiful, moisture resistant, but they can still break.

Protection for kitchen wall can be built from laminate. It is important to choose it with such characteristics that it is not afraid of high temperatures and water splashes. Due to the fact that the panels are tightly connected to each other, they form a comfortable solid surface. The laminate is attached directly to the wall using liquid nails.

It is quite acceptable to make an apron from parquet blocks. The dies are attached to a fiberboard or chipboard backing and then placed on the wall. The drawing can turn out to be varied and very beautiful.

Colors and design

When choosing an appearance wall apron There are no restrictions and the surface can be decorated in any way. A wide variety of color solutions are possible; one or several colors can be used. Beautiful models are obtained by using different shades of the same color.

The design may contain unusual color spots. The surface may look dry and restrained, but it is also possible to create a bright patchwork quilt with fragments of different images, colors and sizes.

Colors in the kitchen are of great importance from a psychological point of view. You should not use dirty or acidic colors in the interior, which can spoil the mood of the cooking housewife and the appetite of family members. The most acceptable colors are foods or ripe vegetables and fruits. Beautiful images of the products themselves will also be appropriate; they will look especially good on a white background.

Color and light in the kitchen should be well thought out. Light in the work area is necessary, and if the countertop is not well lit, additional lighting can be installed in the apron area. The light can also have different shades, which will allow you to change the scenery and diversify the kitchen space.

You can experiment in the kitchen, but you cannot miss the main thing - all design elements should look consistent.

How to make and install it yourself

You can make such an interior element as a kitchen apron with your own hands. First you need to determine what material it will be made of, and then decide whether we can do it or whether it’s better to trust the specialists. It is better to leave the installation of a glass apron to the manufacturer. Tiles, porcelain tiles and mosaics can be installed independently.

If you understand that in your case you can make an apron yourself, then let’s get started. We inspect the surface of the wall, it should be dry and smooth. We determine where the apron will be located. If the stove or sink is located in the corner of the kitchen, then it is advisable to go onto the side wall. If you plan to install a hood, the protective surface should extend beyond it, and it is better if the protection is mounted flush with the top plane of the wall cabinets.

The marking of the future apron should be done in such a way that it extends 2 cm behind the tabletop and cabinets. The marking is done according to the level, strictly horizontally. The top and bottom lines are drawn on the main wall and side ones, if necessary. Further installation technology depends on the material used.

Installing panels

The simplest solution is MDF or chipboard panels. Such an apron can be made of a single piece or several components. The panels are cut to fit the free part of the wall and fixed on it after the furniture is installed. The surface underneath may not be very smooth and does not require special preparation. Fastening can be done using any in a convenient way. These can be screws with decorative heads, liquid nails, special or universal glue. After mounting on the wall, the panel is attached to furniture set using specially selected elements. MDF and PVC panels can be easily installed yourself.

Laying out the mosaic

Mosaic can consist of different materials. The individual mosaic pieces are called chips. The sizes and shapes can be very different - both strict geometry and arbitrary. The more complex the shape, the more labor-intensive the process of laying the mosaic will be.

Chips are combined into matrices. They can be fastened together using paper glued to the front side, but it is more convenient to use a polymer mesh on back side. A gap is made between the chips, which is subsequently sealed using epoxy grout.

Mosaic with smooth surface it is easier to install, and if the surface is corrugated, then more careful work is required when grouting so as not to spoil the pattern. Caring for such fragments during operation will be more difficult, so it is better to form the pattern in such a way that chips with irregularities are located in places less susceptible to contamination.

Let's check how much flat wall. We remove small tubercles of putty from the surface. We clean the wall from dust and prime it.

We sort through the material and examine it. It is better to purchase mosaic elements with a reserve; you should not take them back to back, as defects may be detected or accidental damage may occur during the installation process. We lay out the mosaic on a smooth surface, trimming the gaps. We measure the length and width of the fragment, and then mark this size on the wall. It is better to attach a guide to the wall along the lower border to prevent the mosaic from sliding down.

The adhesive composition should be selected specifically for the material used. There are adhesive mixtures based on cement, polyurethane, and epoxy. We study the packaging and pay attention to the manufacturer’s recommendations. Prepare according to the instructions and apply an even layer of glue to the wall, making grooves. We place the mosaic sheet on the wall, check how correct its position is, and then press it to the surface with a trowel or roll it with a roller. After installing all the sheets, clean the seams from glue and wipe the surface of the mosaic.

Two days after installation, we seal the seams with grout. Grouting is very important, as it must protect numerous seams from the penetration of moisture and microorganisms. It is better to use epoxy grouts, since compared to cement-based grouts, they protect better from moisture, withstand temperature changes better, and crumble less. The variety of available colors allows you to make the best selection.

The section of the wall between the floor and wall cabinets of the kitchen unit is quite small, but it should be protected to a greater extent than the rest of the walls. Fumes during cooking, dampness near the sink, splashes when cooking and cutting food - all this literally destroys ordinary plaster, whitewash or wallpaper.

At the same time, this particular area is constantly in front of the owner’s eyes, and, therefore, should be to some extent aesthetically attractive.

That's why so much attention is paid to the question of how to do it.

Traditional materials

Today, these include many finishes, some of which are impossible to do with your own hands, but generally the installation is quite simple.

• Ceramic tiles - of any size and even configuration, if we are talking about the mosaic version. Such a kitchen apron is traditional, popular, decorative and successfully copes with the functions of protection, since it is fire-resistant and resistant to water and steam at the same time.

Installation may present some difficulties. You can lay the tiles in horizontal rows - the most economical and most boring way, diagonally - which requires some skill and careful calculation, or decorate the kitchen with mosaics. The last method is the most labor-intensive, but it allows you to lay out the tiles in a pattern or even in the form of an image. The following photos show the design of an apron in the kitchen.

• A steel apron is less decorative and, moreover, is not suitable for every kitchen set. However, this material is, without a doubt, hygienic, waterproof and fireproof, and also extremely durable. Available in different forms: long panels, tiles and mosaics.

You can lay out the first and second options with your own hands, just like tiles. Only adhesive composition another one is used. Large slabs steel is first laid on a sheet of waterproof plywood or MDF, and then fixed to the wall.

• Undoubtedly, it will decorate the interior. A wide variety of options are possible here decorative effects– from toning and photo printing to engraving and sandblasting. In this case, the kitchen apron can be either solid panels or glass tiles.

requires experience and physical strength, since a glass sheet of this size is very heavy, and the fragility of even tempered glass is still high.

Do-it-yourself installation of glass tiles of medium or small size. The panels are inserted into an aluminum profile and joined together. Textured glass tiles - for example, in the form of a brick - need to be glued to the wall.

Non-traditional materials

The following options are much more interesting, as they allow you to create completely unique interior. You can use whatever comes into your head, as long as it can be glued or secured in some way.

Apron protection

In the vast majority of cases the last stage laying scrap materials is installation protective screen. There are 2 possibilities here.

Images and photos

All such work plans are carried out after full preparation walls for installation - plastering and leveling. Use as decorative material a lot is possible:

Unusual solutions

Literally anyone can decorate a kitchen apron. Moreover, at first glance, the materials are very far from decorative.

• Laminate finishing is not the most common solution. The decorative effect of laminate is higher than imagined: the material imitates not only parquet or laying boards, but also stone and ceramic tiles. Finishing from a laminate of the appropriate class will not be afraid of water and splashes, and this material is no less resistant to temperature changes than MDF.

The ability of laminate to create a flat surface is also used here: the dies are connected very tightly to prevent the appearance of cracks. The laminate is fastened liquid nails. No other options are allowed here. Laying the laminate, of course, is done with your own hands, since such models are not found in production.

Finish that doesn't need protection

You can make any of the aprons listed below with your own hands from the most popular materials. And by the way, it's not as difficult as it seems.

A truly unusual kitchen apron can only be created with your own hands. Your own imagination and unexpected material will ensure complete individuality, and the methods of fastening the materials are standard.

The kitchen apron is the part of the wall between the wall cabinets and the surface of the kitchen countertop. Tell us which kitchen apron is the best, and what exactly you should choose from the huge variety building materials, no one can. This is purely a choice of your taste and the capabilities of your wallet. But we will try to tell you about what types of kitchen aprons there are, what their pros and cons are, as well as how to make such an apron for the kitchen with your own hands, how to install an apron in the kitchen, how to secure it.

Functionality of a kitchen apron

The kitchen is perhaps one of the most favorite places in the apartment. Family members gather for breakfast in the kitchen, lunch in the kitchen, and family dinner usually takes place in this room.

At the same time, in the kitchen there are all kinds of appliances, water is flowing, the stove and oven are working. Smells, moisture, fumes - all these properties of the kitchen space cannot but lead to the fact that the requirements for finishing materials used in kitchen renovations are quite strict. And among everyone finishing materials What stands out is the apron, which is subject to the most stringent requirements.

This is understandable - splashes from frying pans standing on the stove, drops of water from the tap fly onto the apron, it is exposed to temperature effects, and in different parts the apron is different - the closer to the stove and oven, the stronger the effect. Tiny particles of food and traces of gas stoves leave stains on the surface kitchen items. And if you do not protect the kitchen wall from harmful influences with the help of an apron, it will very quickly become unusable.

Therefore, the functionality of a kitchen apron lies in the following requirements for it:

• the apron must be durable and easily withstand both temperature influences and mechanical damage;
• it must be moisture resistant, not allow water to pass through, and not be afraid of exposure to both hot and cold water;
• the kitchen apron must not react to chemical compounds, organic and inorganic acids, alkalis and other compounds included in the composition detergents;
• the kitchen apron should be easy to clean from any dirt;
• it should look beautiful in the interior of the room.

Choosing facing material for a kitchen apron

When choosing a material, you should consider not only the factors mentioned above. It is necessary, taking into account the interior and lighting of the kitchen, to decide on the color scheme.

If your kitchen windows face north. And the sun doesn’t get there, it’s better to have a brightly colored apron to liven up the kitchen interior. If your kitchen area is flooded all day sunlight, then this interior detail can have light, muted shades, or, conversely, be glossy black.

And one more very important advice- keep it in moderation. If you have a kitchen set and the walls are made in calm light (or dark) colors, then you can make an apron for the kitchen in some crazy color or material.

But if the kitchen is bright, with walls painted in some life-affirming color, multi-colored cabinets, and curtains with butterflies of all sizes, then it is preferable to make a plain apron for it.

Taking into account the necessary criteria (ease of maintenance, strength, moisture and heat resistance), when choosing a facing material, you should pay attention to:

• ceramic tiles;
• porcelain stoneware;
• a natural stone;
• fake diamond;
• mosaic;
• PVC and MDF panels;
• metal surface;
• strained glass;
• laminate;
• parquet.

Popular materials for an apron in the kitchen

The most popular material is, of course, ceramic tiles. With a variety of sizes, shapes, colors and textures of this facing material, it easily fits into a wide variety of interiors.

The tiles are not afraid of moisture, can easily withstand high temperatures, are easy to clean and last a long time. The latter circumstance can be negative for those who like to frequently make changes to the interior.

Porcelain tiles are an even more durable material than tiles, and with high-quality installation they will serve you faithfully for many years. Porcelain tiles will look especially organic if the countertop is made of the same material. Having picked up suitable friend Using different shades of material for finishing tabletops and walls, you can achieve a very interesting color effect.

Natural stone is an expensive material, and it is quite rare to find it as a facing material when installing a backsplash in the kitchen. However, some fans exquisite interiors are chosen as finishing material natural stone. We must give him his due, the natural stone looks simply luxurious. Unless, of course, it was laid in the five-meter kitchen of a Khrushchev apartment.

Artificial stone is cheaper, although it looks no worse than natural stone, and is even easier to maintain. Countertops, kitchen aprons, and even sinks are made from this material. All together, in the right color scheme, will allow you to achieve a very interesting and harmonious kitchen design.

Artificial stone apron

Kitchen aprons made of mosaic can be either single-color or multi-color. From the mosaic you can lay out a picture, an interesting pattern or ornament, or you can simply lay it in a solid canvas of the same color. Mosaics are made in a variety of combinations, combined with a variety of materials, it depends solely on your imagination and on what result you want to achieve. A kitchen apron made of elegant mirror mosaic looks very beautiful and original. But all the dirt, even the most insignificant, will be visible on it. A kitchen with a glass mosaic backsplash looks stunning, but it is very impractical.

Metal aprons for the kitchen look quite interesting, unusual and easy to maintain. Just remember that metal cannot be cleaned with an abrasive detergent. And still observe the measure, since the line when choosing a metal apron is between original idea and the kitsch is very subtle. However, for lovers of the “techno” style, a kitchen apron made of metal is very suitable.

MDF and PVC panels also look good. They are inexpensive, easy to care for and imitate a wide variety of materials - wood, stone, brick, and also come in the most different color. Such panels are not very durable for the kitchen, although they are moisture resistant and respond well to temperature changes. This material, however, is quite easy to damage. However, given their cost and ease of installation, such facing material is easy to replace, giving the kitchen a new look.

Glass splashbacks look amazing and are easy to care for, but they are still quite fragile and can break. Therefore, they must be handled with caution. They look very interesting and expensive kitchen interior 3D glass splashbacks for the kitchen, for example in marine theme. If you decide to install just such an apron in your kitchen, then you need to understand that the main emphasis in the room will be on this splendor, and there is no need for more overly bright details in the kitchen, otherwise it will look vulgar and intrusive.

Laminate and parquet are quite rare as materials for kitchen splashbacks, but they look good and are easy to care for. Laminate, thanks to the tightly connected parts, forms a smooth surface and is easy to clean. A pattern made from pieces of parquet looks beautiful and elegant.

Kitchen apron sizes

Everything is clear about the length of the kitchen apron - it depends on the size of the kitchen and the length of the surface that is located between the countertop and the cabinets on the walls.

But with height everything is somewhat more complicated.

The height of the kitchen splashback will depend on a number of factors. These include:

• height of kitchen furniture;
• hob size and type;
• size of kitchen wall cabinets;
• the growth of your household, especially those who stand at the stove.

The kitchen apron should be slightly below table level and slightly extend under the countertop. In this case, there should be no difficulty in opening the upper cabinets, and the hand should reach the lower shelves of the cabinets. For convenience, the height of lower cabinets standing on the floor should be just below the waist.

The distance between the upper and lower edges of the apron (this distance is called both the height and width of the kitchen apron) should be on average 50 - 120 cm, depending on the height of the ceilings and the size of the kitchen unit. The width of the apron in the kitchen also includes overlaps (about 2 cm).

How to make a kitchen apron with your own hands

Whatever facing material you choose, laying a kitchen apron begins with preparing the wall surface.

For light aprons, such as those made of laminate, PVC and MDF panels, and for heavy ones, such as porcelain stoneware or ceramic tiles, and especially glass, it is produced differently.

Under tiles, porcelain tiles and glass, you need to clean the wall to the very base and knock off all the plaster from it.

After this, you need to ensure that the surface to which the kitchen apron will be attached is even and smooth. Changes should be avoided, otherwise the apron will not last you long, and it will not look as beautiful as you would like.

As for kitchen aprons made of lightweight materials, there is no need to clean the wall to the base; just remove the plaster and lightly level the surface.

Next, under any type of apron, you should install a support made of hard material under the lower part. This can be either a beam or a galvanized corner. The support is attached to the wall along the entire length of the future kitchen apron using self-tapping screws.

How to lay a tiled apron in a kitchen is generally clear to everyone. The installation rules are simple:

• you need to lay it on a special tile adhesive, which hardens quite quickly;
• this glue is applied from below immediately above the support to the width of one tile and the length of the apron;
• after this, they begin to lay the bottom layer of tiles, leaning on a beam or corner attached to the wall;
• Be sure to insert crosses or wedges into the vertical seams between individual tiles so that these seams are even and identical;
• the upper edge of the tiles must be leveled as much as possible using a level;
• twenty minutes later, after the glue on which the first row of tiles is laid has hardened, we begin to lay the next row according to the same rules, using the already laid row as a support;
• we post the rest in exactly the same way facing tiles to the top border of the apron.

A mosaic apron is laid in approximately the same way as a ceramic one, only the fragments are placed not on glue, but on a special gypsum-cement mortar, which dries longer and makes it possible to correct mosaic fragments if necessary.

Glass apron

With glass it is somewhat more difficult; one person cannot cope with this; assistants are definitely needed.

How to attach such an apron in the kitchen needs to be explained in detail. To begin with, you need to step back about 2 cm from the top edge of the glass and make holes in the wall for the dowels at a distance of about 5 cm from each other. Dowels are inserted into these holes.

Exactly the same holes are drilled along the entire length of the support for self-tapping screws, stepping back from the edge of the support beam or corner by the same 2 cm as in the upper part. Prepare for both the upper and lower screws special devices, with which the glass will be held (most often included in the apron kit). After this, you need to once again clean and degrease the wall, as well as that part of the glass that will be adjacent to the wall.

Glue the glass apron onto the silicone. In this case, silicone is applied to the wall surface in waves, with a loop width of approximately 3 cm, quite tightly. Then the glass will stick firmly to the wall. In this case, the waves should be applied vertically to the wall. Silicone hardens quite slowly, which is good, because the glass needs to be installed carefully and carefully.

Two people carefully lift the one-piece glass apron. When lifting the glass, you need to install it on the lower support. After this, the glass must be pressed tightly against the wall over its entire surface. A third person must tighten the screws and press the glass using the holders. You can release the glass only after all the screws - both lower and upper - have been tightly screwed.

Let us immediately note that the gap that forms between the apron and the tabletop must be covered with something, otherwise dirt, food particles and splashes of water will get there. The gap can be closed with a PVC edging.

It is difficult to say from what material it is better to make an apron for the kitchen, since in each specific case you need to be guided by a lot of circumstances, and first of all, by the preferences of the apartment owner.

However, having an idea about certain facing materials for a kitchen apron, you can get an idea of ​​the pros and cons of your choice.

When questions arise about what is best to make an apron on the wall in the kitchen, you should first of all pay attention to the materials used. They differ in cost, shade, dimensions. At the same time, there are a number of other parameters, but the main ones are such characteristics as wear resistance and strength. When choosing an option, take into account the quality of the wall surface. The rougher it is, the better the adhesion to the adhesive will be. This is taken into account when choosing tiles, MDF plastic panels, stone (natural, artificial).

Similar articles:

Why do you need a kitchen apron?

This interior element performs 2 main functions:

Decorative.

A kitchen apron will decorate any room. It is made from attractive materials, which additionally allow you to hide defects in the rough wall. Thanks to the creation of accents, the interior acquires originality, brightness, and completeness. The finishing of the work area in the kitchen is carried out in different variations: pattern, photograph, drawing, relief surface of the coating. The choice is made taking into account the color scheme and style direction of the interior.

Protective.

To eliminate the possibility of moisture affecting the rough surface load-bearing wall, near which a work area is often set up, you can make an apron for the kitchen. In this case, water has an effect on materials such as concrete and brick. Negative influence, and ceramics, natural stone or plastic are characterized by moisture resistance. For this reason, the walls near the sink and stove are tiled. In addition, the apron is well resistant to chemicals (detergents). The use of this interior element helps to increase the service life of the load-bearing wall.

Requirements for kitchen aprons in terms of combining functionality and beauty

Select a material that suits the properties and appearance for the premises. For example, it is not advisable to use wallpaper for this purpose, because... they do not last long and do a poor job of their main task. If you are deciding what is best to make an apron from in the kitchen, you should pay attention to whether the selected material meets the requirements for a piece of furniture of this type:

1. Resistant to moisture. If you install an apron made of hygroscopic material on the wall, it will not last long. The appearance of the finishing of the work area is largely determined by such properties as moisture resistance.
2. The material from which the apron is made must withstand high temperatures. This is due to the fact that the coating is located in close proximity to the slab, the source hot water, which means it will come into contact with steam. The apron must be able to withstand not only high temperatures, but also sudden changes in the value of this parameter, which leads to the appearance of condensation.
3. Easy to care for. It is not necessary to use materials with a smooth surface. They are easy to remove limescale, fat, drops of water. However, this section of the wall gets dirty quite quickly. If you are deciding which one is best to make an apron, you should pay attention to materials characterized by a fine-porous structure. Dirt lingers less intensively on such surfaces.
4. Resistance to mechanical loads. A durable apron lasts much longer.
5. Attractive design. With the help of this interior element you can decorate a room and influence its visual perception.

Features and Benefits

Apron sizes may vary:

• a large interior element occupies a section of the wall from the hood level to the floor;
• a standard apron is characterized by a height of 55-75 cm.

The second option is more common, because In this case, the material is consumed more economically. If kitchen cabinets located at some distance from each other, it is recommended to make an apron from the hood to the floor. The choice of material is determined by the requirements for it, personal preferences and financial capabilities.

Often, ordinary ceramic tiles are used for this purpose. More expensive analogues are natural/artificial stone, mosaic, glass. Wood-containing materials are used less frequently. From this group, MDF is most often used. Economy class materials include plastic panels. If the user is limited in funds, or there is a desire to create original apron, any available options should be considered, for example, a canvas made of wine corks, which you can make yourself from scrap materials.

When choosing an apron for the kitchen, you should decide the feasibility of finishing the work area and take into account positive traits of this interior element:

• low material consumption - you don’t have to cover the entire wall, but only part of it;
• protection of the partition, which is more susceptible to aggressive factors than other surfaces;
• improvement of interior design;
• multi-variant execution;
• provided that you choose the right apron for the kitchen, you can count on a long period of its use;
• relatively simple installation;
• ease of care.

Selecting color and finishing design

There are such solutions:

1. By finishing the work area, they create a background for the kitchen set. Here the color of the apron should match the shade of the furniture. Wall finishing is often done in light colors, and the front panels are darker. There is also the opposite option: the apron is a dark shade, and the set is light.
2. Focus on the apron. In this case, the finishing of the work area is distinguished by color and contrasts with the coatings of other interior elements. The wall is decorated with a bright pattern and photograph.
3. Original design. You can make an apron in the kitchen with your own hands using available materials. Unusual design work area attracts attention, decorates the room, and makes the interior unique.

If you use a neutral color scheme (beige, white tone), such an apron is suitable for a kitchen in any style. Finishing with black material is done if the room already has design elements of the same design. To visually enlarge the space, the design of a small kitchen and work area is done in light colors.

What types of kitchen aprons are there?

The section of wall near the stove/sink is finished in different options, excellent in design, color and material. The last parameter is the most important, because the type of coating determines the properties of the apron. Today it is possible to finish the kitchen with laminate panels, and you can do it yourself. There are options made of glass, tiles, plastic, porcelain stoneware, stone, and use sheets of polycarbonate and plywood. If wood-containing materials are used, they must be moisture resistant. The second most important parameter is mechanical strength.

Plastic

Panels of this type are resistant to exposure to water. They can withstand moderate mechanical loads. However, intense pressure on thin plastic is destructive - the product cracks and cannot be restored. The advantages of this material include low cost. In addition, a do-it-yourself plastic kitchen apron is relatively easy to install. It can be glued to liquid nails or other adhesive suitable for the type of material.

In addition, plastic panels hide surface imperfections well. They can be installed even on a curved wall. This possibility is due to the flexibility of the material. However, he is not attractive. Panels lose color in the sun and are exposed to high temperatures, therefore it is not recommended to install them near the stove.

Budget from MDF

If you are deciding how to make an apron from MDF, you should take into account the positive qualities of this material:

• low price;
• attractive appearance;
• wide range of options;
• simple installation;
• it is possible to replace the coating section;
• environmental friendliness.

Wherein MDF boards are not resistant to high temperatures. Although slightly, they are still susceptible to moisture. Service life of the material under conditions high humidity will not last long.

But in this case there is no need to purchase special glue for installation. If you are deciding how to install an MDF apron in the kitchen, you should know that to do this, it is enough to fix the panels on the wall using self-tapping screws/dowels.

From ceramic tiles

The material is durable, non-hygroscopic, and can withstand exposure to ultraviolet radiation and moderate mechanical loads. Due to these properties, tiles are often used for finishing aprons. Flaw this option– the need for careful alignment of the wall. When installing the tiles, surface imperfections will be visible.

In addition, you need to choose an adhesive mixture. If you are deciding how to lay tiles correctly, you should pay attention to universal compositions. To finish the work area, you can use glue that can withstand high temperatures, because... the apron will be in close proximity to the hob.

From mosaic tiles

This material is presented different types, which differ in installation method and dimensions. There are small tiles. If you plan to make a mosaic kitchen apron with your own hands, you need to take into account that the process of installing small-sized products will take a lot of time.

An alternative option is laying tiles standard sizes with mosaic finishing. Such products are installed quickly, and it is difficult to notice the difference in appearance. The material has similar properties to tiles, but requires more careful maintenance. This is due to the presence of a large number of grooves (seam joints) between the mosaics. The main advantage of tiles is the ability to create any pattern or design.

• increased strength;
• moisture resistance;
• easy care;
• long period of operation;
• attractive appearance, similar to granite.

The porcelain tile apron is attached using glue. The installation technology is practically no different from the principle of installing tiles. This material is offered at a lower cost than its natural counterpart. However, in appearance these finishing options are not much different.

From glass

Panels made of this material are called skinals. Plain or tempered glass can be used. The second option is preferable, but it costs more. Installing a glass apron made of tempered material will allow you to get reliable coverage resistant to high temperatures. Panels of this type are not afraid of aggressive agents or damage.

Plain glass is cheaper, but does not last long, because... exposed to mechanical stress. The main disadvantage of panels of this type is the need frequent care. Glass apron It is not easy to install for the kitchen with your own hands, because... It is necessary to make holes for fasteners. The advantages include an attractive appearance, which is due to the possibility of inserting a bright photograph or drawing between the glass panels.

Made from artificial stone

Porcelain stoneware is included in this group of materials. This also includes acrylic stone. The last option has a sufficient level of strength and moisture resistance. This type of material is not exposed to high temperatures, ultraviolet radiation, and is characterized by a long service life. If you are deciding how to lay out an artificial stone apron, you should know that with its help you can get seamless coating. In addition, there is a large number of finishing options of this type, different in color and texture.

Made from natural stone

This is the most expensive option, so it is not used as often as its analogues. This group includes granite and marble. In terms of properties, natural stone corresponds to porcelain stoneware. Panels of this type differ in shade. Today we offer a wide range of products in black, pink, red, yellow, blue, grey, brown and white. The disadvantages include the complexity of installation. The apron made of natural stone is attached using a special glue.

DIY installation

First of all, you need to remove the old coating. Then the surface is leveled. If necessary, the wall is re-plastered. If the surface is not smooth enough and there are obvious defects, they are eliminated by filling with putty. Then the wall is treated with a primer. On next stage actions may vary, it all depends on the type of material used:

• a mounting grid is attached or notches are prepared on the wall, which will allow the tile to be securely fastened;
• holes are made in the wall for dowels.

Installing an apron in the kitchen requires the use of building level, with its help they check the quality of the coating. Holes for sockets in the kitchen apron are made before installing the finishing material. If you plan to backlight, the wall is chipped at the stage of preparing the rough surface.

What do you do with old furniture?

Does decorating a kitchen apron with ordinary ceramic tiles, tempered glass with standard photo printing from a catalog or a plastic wall panel seem too boring to you? In this collection of photos you will find unusual, bright, stylish, but quite real and practical ideas design of aprons that are easy to implement in your kitchen. The material was prepared by the site Krasivayaplitka.ru.

1. Handmade ceramic tiles
The use of unique finishing materials is one of the fashion trends in interior design. Finish your backsplash with handmade and painted tiles. It will bring special warmth to the kitchen design, make the interior unique and emphasize your individuality.

Tiles by individual order It can be different - painted and plain, smooth and embossed. In terms of strength and practicality, it is in no way inferior to the factory one. But you can bring your ideas to life or choose an idea from a catalog.

This finish can be made to order in a ceramic workshop. But if your renovation budget is limited, take a closer look at factory ceramics collections. For many large manufacturers You can find ready-made tiles, which are difficult to distinguish from handmade ones by their appearance. Of course, there are fewer design options; you will have to choose from what is available, but the cost is much lower.

• WE RECOMMEND:

2. Painted tiles
Most budget method Add a twist to standard ceramic finishes by painting the apron yourself. With the help of special paints for ceramics, you can transform inexpensive plain tiles if you decorate them with an interesting design. Now imagine how much joy your inner child will get from the process!

Don't know how to draw? Use a stencil. It’s easy to make by printing out a picture you like from the Internet. You can fix the drawn image by applying 1-2 layers of transparent acrylic varnish. If you do everything correctly, you can admire the updated apron for at least two to three years.

3. Photo tile
Photo printing on tiles looks much more interesting than standard decors, not to mention a smooth, monochromatic surface. If the range of photo decors from ready-made collections does not inspire you, consider making custom photo tiles. There are several ways to transfer an image onto a ceramic surface. The most reliable and durable - using decal technology. It will cost more, but will last much longer than an apron with a pattern applied by sublimation.

4. Artificial stone
Embossed textured surface decorative stone looks very impressive. But practical housewives who love to cook a lot may doubt the practicality of such finishing. On relief surface Dust and greasy deposits easily settle. You can avoid problems with cleaning if you install a powerful hood and cover the surface of the stone with transparent acrylic varnish.

The optimal solution is to decorate part of the wall behind the stove with a small panel of tempered glass, and decorate the rest of the apron with stone. Another good option is to use stone-look ceramic tiles: they have a less porous surface that is easier to keep clean.

5. Lining and wood
Imitation wood looks great in laconic modern interiors, and in cozy kitchens in country style. If you want a kitchen with modern design, take a closer look at MDF wall panels finished with plastic, the structure of which resembles wood not only in appearance, but also to the touch. In a “rustic” interior, you can also use lining to finish the apron. The main thing is to treat it with an antifungal solution and cover it with a waterproof protective varnish.

6. Decorative plaster
Walls finished with this material are not much inferior in practicality to aprons made of tiles or glass, but only if you choose the right type of finish and strictly follow the technology of its application. In addition to the popular “Venetian” and “bark beetle”, decorative plasters have many variety of options design. For example, for kitchens in the loft style, finishing with concrete-like plaster is ideal, and for country or Provence - a coating under old wall with craquelure.

7. Mirror panel or tile
The mirror surface has the super ability to visually magnify small space, giving it volume and depth. The mirror on the apron perfectly reflects light and makes a dark kitchen brighter. But there is also an obvious disadvantage - this type of finishing is suitable only for neat people. With such an apron, any mess on the work surface will be doubled, and fingerprints, drops of water and splashes of grease will be evident.

8. Brick or clinker tiles
The textured surface of red brick looks fantastic in combination with the smooth glossy facades of a white, beige or gray kitchen set. Thanks to the contrast of colors and textures, such an apron will add texture and expressiveness to even the most laconic interior. Recommendations are the same as for finishing artificial stone- cover the surface of the apron with transparent varnish, it will become easier to clean. Another option is to protect brick wall panel made of transparent tempered glass.

9. Stainless steel wall panel
The steel on the apron will fit perfectly into the design of kitchens in loft, minimalism and hi-tech styles and will complement a kitchen set with a modern design. If you don't like the look of splashbacks made entirely of metal, look at the photo below to see what small metal panels look like. Most often they cover part of the wall behind hob(this solution is especially practical for kitchens with gas stoves). The rest of the apron can be decorated with artificial stone, plastic, tiles, glass or painted with moisture-resistant paint.

11. Wallpaper
Wall coverings with eye-catching patterns or naturalistic imitation of wood, stone, fabric, brick are good for creating an apron with an original design. In kitchens without upper cabinets, you can decorate the wall up to the ceiling in this way. Transparent tempered glass will help extend the life of the wallpaper. Optiwhite is best suited - it will cost about a third more than usual, but it does not have the characteristic greenish bottle tint, which can distort the color of the pattern on the wallpaper and ruin the entire impression of the apron.

• WE RECOMMEND: