How to decorate a doorway. Do-it-yourself doorway decoration for entrance doors

When planning the decoration of an apartment or house, choosing the ideal design solution for many ordinary people it becomes challenging task. In an attempt to decorate their homes, people use all available materials, from Italian wallpaper to... artificial stone . Particularly difficult is the finishing doorways, since the number of options that designers offer can amaze even the most demanding imagination.

It is extremely difficult to choose the ideal method that will optimally fit into the overall style solution and correctly emphasize the leading direction.

Finishing the doorway: choosing the appropriate solution

Before deciding on the design of the doorway, the designer, together with the owners, needs to decide what exact shape these openings will be.

There are the following forms of doorways:

• Rectangular opening. This method of organizing space requires either the presence of a door or voluminous and noticeable cash. Depending on what kind of cashing is chosen, the doorway can perform both an auxiliary and a main function in the interior of the room. In itself, such a strict form requires additional decor that can give it the necessary gloss and attractiveness.



• Arch. This method of designing doorways is quite popular and appropriate in certain styles. Designers note that using an arched opening is only advisable if the rooms it connects are made in the same style. Experts advise paying attention to the fact that overly massive or bright decorative elements can make such an opening heavier.



FACT! The arch does not have to be round. Other forms are also used: ellipsoidal, trapezoidal, asymmetrical arch - each of them is worthy.



• Imitation of an arch. This method of designing a doorway can be called “lazy”, since in this case an ordinary rectangular opening is given the shape of an arch using segments fixed in the corners of the opening. In this case, designers advise making these corners openwork and airy - this will allow such an arch to fit into any interior and make the room more spacious and lighter.



Finishing doorway without door- this is a special task, the difficulty of which lies in the fact that all the attention that could be focused on the door is transferred to the doorway. Therefore, in this case, designers pay more attention to the design, choosing options and finishing methods much more carefully.

ADVICE! Often, curtains or drapes, as well as lambrequins flowing in noble folds, are used as a door substitute in such openings.

Use of plastic and drywall

Despite the popularity natural materials, the use of PVC panels and, as well as finishing openings with artificial decorative stone, is still in fashion. All these materials are acceptable options, which, if executed well, can become a real decoration of the room.



• Plastic panels are the simplest and most laconic option for designing an opening, since they allow you to imitate such a popular wooden texture. Dark panels allow you to create an attractive contrast with a light painted or wallpapered wall, thereby emphasizing the rigor and sophistication of the interior. This design method allows you to visually expand the space and create the effect of a high ceiling. In addition, such panels are the most transparent: they are easy to clean, even if dust or dirt is visible on the surface.



• Polyurethane stucco replaced the usual plaster, because it has a decent appearance with less weight and excellent practicality. When choosing this method of decorating a doorway, you should be extremely careful, since the abundance of decor can overload the room and make it small.

  

  Most often, in such cases, the most simple and concise stucco molding in white or another neutral color is used.

  

• Drywall. Finishing with this material is carried out in cases where the task of designers and builders is to divert attention from the opening and create the effect of a single room.

  

  In addition, it often becomes the basis for the use of other decor: for example, often on plasterboard structures polyurethane cornices are glued on.

  

  Regardless of what kind of material will be used to decorate the doorway, designers advise paying attention to the appropriateness and feasibility of using massive or volumetric elements.

  

  Complementing the traditional design with moldings or mosaics means making the room individual, adding a touch of the owners’ delicate taste to it.

  Decorative stone in the decoration of doorways

  Finishing doorways with decorative stone has become especially popular lately. This is due to the fact that decorative stone is one of the most stylish ways to decorate doorways and allows you to give the room a new mood and sophistication.

  

  The use of such material is quite expensive, but is more than compensated by the decent appearance and reliability of the result obtained.

  

  Finishing an opening with artificial stone is often ideal solution, since this material has the following advantages:

  • spectacular appearance;
  • durability and reliability in operation;
  • ease of maintenance and the possibility of restoring damaged elements;
  • variability and compatibility with other decorative materials.

  

  Most often, medium-sized stones that do not burden the interior are used to decorate openings in apartments with artificial stone. To give such a finish a “natural” look, the outer edge of the finish is made deliberately uneven, while smooth edges are used extremely rarely.

  

  If an arch is decorated with stone, then in its upper part the stones are laid around the perimeter of the opening: in this way the geometric shape of the arch will be emphasized, which will make it more noticeable against the background of the rest of the stone-lined wall.

  

  If you decorate a doorway without a door with such stone, you should lay the decor on both sides of the opening: this option will allow you to optimally fit the decoration into the interior and connect two rooms into one.

Sections of the article:

A doorway without a door allows you to visually expand the space, adjust its visual sensitivity, combine several rooms into a single zone, and give the interior lightness and freedom with conventionally defined boundaries. To make such an opening look complete, it will require finishing with various materials. How to decorate an open doorway - read our article with photo examples.

Advantages

Doorways without a door have the following advantages:

• Saving space due to the lack of free space along the opening path of the door leaf. For normal operation swing door a minimum of 1 m2 of space is required, which should be left free, without cluttering with furniture and other interior items;
• More light, this is especially true for adjacent rooms, one of which does not have a window or is equipped with a small window. An open doorway will allow natural light to enter a dark room;
• Air circulation, relevant for small rooms with insufficient ventilation, for example, due to the lack of a window;
• Combining space through two rooms, decorated in the same style, between which there will be a conventional demarcation in the form of an open opening;
• Visual expansion of space by connecting small rooms to the main one, for example, a balcony or loggia to a room;
• Zoning. A similar effect is used when dividing one large room into two smaller ones, while maintaining the freedom and lightness of the space due to the open door portal;
• Easy to maintain, as there is no need to regularly wipe the sashes, the glass inside them, or lubricate the locks and hinges;
• In addition, a stylishly designed doorway without a door allows you to give the room an original and unique look due to its shape, texture or shade.

Varieties

Open door portals can have a classic rectangular shape, differing little from the usual door design, or they can be made in the form of arches of various shapes and sizes.

The shape of the arched opening can be:

• Roman (romantic) with a vault in the shape of a half circle, the diameter equal to the width of the opening;
• Turkish is characterized by the oriental design of the vault in the form of a dome;
• The British one is considered a smaller version of the Roman arched doorway, since the vault is made in the form of a truncated circle;
• The ellipsoidal one is considered a more elongated analogue of the romantic arched opening;
• The Slavic opening is distinguished by smooth rounded corners of the classic rectangular shape of the passage;
• Gothic is distinguished by a pointed vault, the upper edges of which extend to a single point;
• The Thai opening has the shape of an arch cut in half, one of the halves of which was replaced by a wall;
• The transom has a blind arch, decorated with stained glass, relief, frosted, mirror glass or other light-transmitting material.

There are also arched openings of unusual patterned shapes and completely round portals.

Design options

A doorway without a door will not be complete appearance without decoration with various finishing materials. Finishing can be done with panels made of plastic, MDF, chipboard, natural veneer, laminate, plasterboard, clinker or mosaic tiles, natural wood, eurolining, wallpaper, brick, stucco, plaster, natural and artificial stone. In addition, ready-made arches and platbands for decorating openings are available for sale.

PVC panels

To the question: “how to decorate a doorway?” The first ones that come to mind are plastic panels. Affordable price, variety of textures and color solutions, as well as the flexibility of the material allows you to design an opening of any shape. Simple and easy installation can be done independently without the involvement of specialists. Ready-made kits for arched openings without a plastic door are available for sale. The set consists of 4 long trims designed for fastening to the vertical parts of the opening, between which 2 additional strips are inserted, and 2 short horizontal trims and 1 additional strip for decorating the upper part of the opening.

Open arched openings decorated with plastic panels fit harmoniously into any interior. For example, plastic imitation of metal or stone will fit perfectly into modern high-tech or techno styles, and panels in small flower in pastel colors - a stylish addition to Provence.

MDF panels

The most popular is finishing a doorway without a door with MDF panels. Lightweight, fairly flexible panels are very easy to install with your own hands. Imitation natural wood allows you to stylishly and inexpensively design a portal that will require a minimum of care in the future. It is not recommended to use this type of finish in rooms with high humidity, as the panels become deformed when they absorb moisture.

Plaster

High quality, durable finish interior openings made of plaster is distinguished by its visual depth and tangible texture. The level of porosity and shade allow the plaster to imitate natural stone, marble, textiles (silk, velvet, etc.). The structure of the material, combined with certain skills and a specialized tool, allows you to create various patterns and effects on the surface of a portal without doors.

Plaster is a universal finishing material that will fit perfectly into any interior. Depending on the color and texture, a plastered opening can be either a harmonious continuation of the interior or bright accent inside it.

Wallpaper

An analogue of plaster is the finishing of interior openings liquid wallpaper, which are also applied to the surface with a spatula and are suitable for creating various patterns. Liquid wallpaper differs from plaster in its softer texture and visual lightness. For fans of interior decoration with wallpaper, decorating an opening without doors with vinyl or non-woven wallpaper is suitable, which can be either an extension of the wall or a bright border to the entrance to the room. The photo below shows options for decorating door portals with wallpaper.

Decorative rock

Natural stone creates a luxurious, cozy atmosphere in rooms designed in loft, minimalism, ethnic, country, chalet, and Mediterranean styles. To design an open doorway similar material requires certain skill and experience, with the help of which the possibility of installation is assessed sufficiently heavy material. Therefore, it is recommended to invite a specialist who will not only assess the risks and the possibility of such finishing, but also will not spoil the expensive material.

A budget alternative to natural stone is artificial. The light weight of the bricks allows you to independently design the doorway even on plasterboard walls. You can see how to decorate the opening between rooms with decorative stone in the video below. It also shows how to give artificial stone a natural look by applying acrylic varnish, which also protects the finish of an opening without a door from small particles of dust and dirt getting into the pores.

Clinker tiles

They call it clinker ceramic tiles an elongated rectangular shape, which is laid out in a “running start” like brickwork. When decorating a doorway, the protruding edges of the tiles in every second row are not sawed off, creating the effect of a torn edge. Clinker is made not only in the form horizontal tiles, but also corner elements that allow you to design corners without preparatory work for cutting and fitting. The palette of shades allows you to choose tiles to suit almost any interior.

Stucco molding

Stucco structures are usually used in Empire, Classic and Antique styles. Openings without doors, decorated with columns on the sides and pilasters, visually stretch the room, which is especially important for rooms with medium or low ceilings. This stylistic solution is not recommended in small rooms, since the relief and many small elements will simply “eat up” the free space. What the stucco decoration of the door portal should be like can be seen in the photo examples just below.

When choosing a material, it is recommended to pay attention to polyurethane stucco, since, unlike gypsum, it is lighter, more flexible and durable. Such stucco molding is not afraid of shocks that may occur when dropped or transported, and does not require special skills during assembly.

Textile

Budget finishing of openings between rooms in short terms can be made of textiles. Curtains can be made of thin, weightless material for small spaces, or in the form of thick curtains, harmoniously combined with classic interiors. For rooms without a door with low ceilings the best option will filament curtains, which will create the illusion of a higher space. Textiles can either flow freely in folds or be secured on one or both sides using ribbons, pieces of fabric, chains or twine.

The main advantage of this design is the ability to remove textiles at any time to replace them with another option or wash them.

When planning a room, many people wonder how to beautifully decorate a doorway? The stylish and practical design of a doorless passage built into a storage area that occupies the entire wall area from floor to ceiling is gaining increasing popularity. Depending on the preferences of the owners, the storage area is designed as a large shelf for books, figurines, photographs and other pleasant little things. In the bedroom, a wall with shelves can replace a full-fledged wardrobe for clothes.

A small doorway, for example, between the dining room and kitchen, living room and loggia, is interestingly complemented by windows on the sides, through which additional penetration sunlight, giving the room lightness and weightlessness. Side windows are replaced with built-in niches with lighting, shelves, narrow cabinets, decorative elements made of metal or plastic, onto which photo frames, paintings, and climbing plants are attached.

For lovers of nature and natural styles interesting solution For decoration there will be a living green frame or a wall of moss around the open portal. The built-in drip irrigation and fertilization system gives owners of this decoration the opportunity to admire natural greenery for many years without any effort.

Dimensions of open doorways

The interior style depends not only on the materials used to decorate the open doorway, but also on its shape and size. For example, a wide opening, almost the entire length of the wall, unites two rooms, creating the illusion of a free, light and airy space. At the same time, depending on the design of the opening, the combined space may look solid or have a conditional demarcation.

A rectangular opening up to the ceiling allows you to visually raise a low ceiling, stretching out the room. In addition, such a height of the opening draws attention to itself and sets a certain landmark for the interior.

A semicircular or domed arched opening softens the space, tuning it into relaxation and comfort. The Roman arch looks great both in the opening of a thin wall, and as a small vestibule or corridor with a ceiling that continues the contours of the passage. The semicircular shape of the arch of an opening without a door is considered the most popular among owners of apartments and houses.

Thai arched doorway consisting of right angle on one side and a circle on the other, allows you to create a unique interior. The large hall is interestingly played out by arranging two Thai openings, located at rectangular angles to each other and separated by a small partition. This design looks like a large semicircle divided in half.

An original, unique interior is created using a shaped open opening. Volumetric patterns and curls in the form of a frozen wave, asymmetry, contrasting finishing materials and the addition of lighting to the portal, shelves, niches or columns will become a stylish accent and reference point for the entire interior.

One of the common options visual increase spaces in the room - this is the dismantling of interior doors. This solution allows you to visually expand the premises and create a single space in the interior. In this case, an important task arises - finishing the doorway. In this article we have collected the most popular and non-trivial ways to solve this issue.

Preparing the opening

The process of preparing the work surface varies due to the materials chosen as finishing.

Types of finishing materials

The choice of materials for finishing a doorway on the construction market is extensive; there are both economy-class options and expensive alternatives. Everything depends directly on the needs, desires and capabilities of buyers, as well as several important aspects:

• you should not skimp on the quantity and quality of fastening elements (for example, if you make a sheathing from wooden blocks, you need to check them for the presence of mold, rot and large cracks);
• when purchasing materials packaged in different boxes, you should check the delivery batches; if they differ, then the shade of the contents may also differ;
• the durability of the material, its ability to withstand daily contact with various external influences - this is what all craftsmen should first think about.

Using the example of the most popular options for finishing a doorway, we will consider in more detail the workflow for each of them.

Plaster

This option can be called the most popular due to the simplicity of the work and the practicality of using the finishing material.

The only thing you should take care of before starting finishing is to cover the floor with film or newspapers so as not to damage or contaminate the surface.

1. Work begins with preparing the opening: removing old materials and priming the surface.
2. Installation of beacons (you should mix a little mortar and fix the perforated corners on the walls, aligning them to the building level).
3. A masonry reinforcing mesh is attached between the corners.
4. The building mixture is prepared in the required quantity.
5. Using several spatulas, the mixture is applied to the walls in a chaotic manner, after which it is smoothed over the surface using a rule.

It is important to remember that the thickness of one layer should not exceed 2 cm, otherwise voids or cracks may form, and this will negatively affect the durability of the finish.

If everything is observed, all you have to do is wait until the surface is dry, and you can proceed to finishing: painting, wallpapering or applying decorative mixtures.

Clinker tiles, mosaic

This material is intended for cladding a variety of areas of a residential building, including the doorway. There are no special installation rules; options are offered depending on the interior design:

Covering a doorway with tiles or mosaics does not require any special tools or special skills; the work process consists of step-by-step actions:

1. after the surfaces have been cleaned and plastered, it is necessary to apply markings according to which the tiles will be located in the doorway;
2. prepare special glue (liquid nails are used only in cases where the surface is perfectly flat);
3. apply glue with a spatula to reverse side tiles, distribute it over the surface, remove excess;
4. Press the tile against the wall and hold it for a few seconds, applying force.

To ensure that the products are fixed evenly on the surface of the opening, you should prepare plastic beads in advance, which are inserted into the seams between the tiles. It is removed after the adhesive mass has hardened, no earlier than 24 hours later.

It is very important that if glue gets on the surface of the tile, it should be removed immediately, since the hardened mass is very difficult to remove.

When the opening is completely ennobled, the seams between the tiles are sealed with special grouts, the color of which is matched to the tone of the walls or finishing materials.

Decorative rock

Another option that is used as an alternative to clinker tiles is decorative stone. It has several advantages over other finishing materials:

• an exact imitation of natural rocks, while there are a lot of varieties of textures: marble, limestone, jasper, brick, cut wood and many others.
• transfers high humidity without consequences;
• easy to care for, because does not require the use of special means to remove dirt from the surface;
• resistant to mechanical damage if installation rules are followed.

The installation process is very similar to laying clinker tiles, but there are several important points that should not be forgotten:

• depending on the thickness, the weight of the products may vary, which may increase the consumption of the adhesive mass;
• When purchasing finishing material, inspect several pieces with back side, if there are many pores on the surface, they have a low density, which will affect the strength of the stone.

This finishing material comes in two types:

1. Natural. Made from natural rocks crushed into crumbs. Such products are distinguished by their heaviness and strength under direct mechanical influences.
2. Artificial. It is based on gypsum, to which dyes and polymers are added. The main advantage is the low price, which fluctuates around 300-800 rubles per square meter.

Wooden panels, MDF

An equally popular option for finishing door slopes are wooden or MDF panels laminated to resemble wood, which fit harmoniously into classic style. The advantages include:

• aesthetics;
• durability;
• no visible defects upon contact with water.

The process of installing panels made of wood or MDF will require you to purchase additional materials - wooden slats that will be used as sheathing:

1. The slats are cut to fit the width of the opening and attached to the walls using dowels and screws.
2. The panels are also adjusted to fit the opening with a small indentation, to hide which an end corner is used.
3. The starter panel is secured with finishing nails.
4. All subsequent panels are attached through a tongue and groove (connection system present on the products).
5. From the end, the structure is closed with a side panel - a platband, which is attached with nails to the sheathing or with an end angle.

Photo instructions for finishing the opening MDF panels

To hide the fasteners, you can use special furniture wax or adhesive plugs, matching them to the color of the panels.

This finish will look rich, even if inexpensive MDF panels with a textured pattern imitating exotic wood were used.

Laminate

Many finishers love laminate for its flexibility, which allows this material to cover almost any openings, corners and nooks found in residential premises. The only thing worth worrying about is that it does not tolerate moisture well and after contact with water, swelling may form at the ends of the products, and such defects cannot be eliminated.

The laminate is attached using self-tapping screws to the sheathing in the same way as finishing with PVC or MDF panels.

If the walls are relatively smooth, then you can use liquid nails and spacers, which will press the material to the surface of the walls for several hours.

Stucco molding – gypsum and polyurethane foam

One of the most interesting, but in its own way capricious materials is stucco. Using it in the interior to decorate the door opening, you should maintain a single concept general design, fit into the style that is characterized by columns, pilasters with capitals and others similar elements decor.

The stucco molding on the opening should be combined with other interior elements, for example with floor and ceiling skirting boards

There are two types of stucco on the construction market:

1. Plaster. Without it, it is impossible to imagine the interiors of country houses made in the Venetian or classical style. But in small apartments such products seem too bulky, interior openings narrow not only visually, but also actually. Plus, gypsum is a very heavy and fragile material; under mechanical stress it will not last long.
2. Artificial, or rather polyurethane, is an affordable analogue of gypsum.

The advantages of polyurethane foam decor also include:

• ease of construction;
• ease of installation: products are easily cut with a stationery knife and attached to liquid nails;
• variety of ready-made forms;
• The polyurethane surface is suitable for painting.

Stucco molding looks ideal in the frame of a doorway with an arch, especially if the width allows the erection of monolithic column supports along the edges.

Doorway shapes

Finishing openings between rooms without a door is complicated not only by the choice of material used, but also by what shape this very opening will be.

The solution to this issue will affect the harmony of the transition between rooms, the lighting of the rooms, the combination of styles in the interior and the practicality of movement.

Rectangular

A common option is rectangular. Such an opening remains immediately after dismantling door frame and it has its advantages:

• suitable for all finishing materials;
• no additional structures are required;
• clearly delineates two living spaces, for example, a balcony and a kitchen, while visually expanding both;
• great for modern styles interior design.

A wide rectangular opening allows the slopes to be used as niches for interior items

Arched

The arch has an interesting ability: in rooms with low ceilings it visually raises them, and in cases with high ceilings, on the contrary, it lowers them. Moreover, the wider the arch-shaped opening, the lower the ceiling appears.

Many people prefer this option for its softness and lack of sharp corners, which makes transitions between rooms more invisible. The arch fits perfectly when exiting the hall; if it is wide enough, the movement between rooms will be imperceptible.

The absence of massive doorway decor emphasizes the beauty and complexity of the rest of the interior

A nice addition are ready-made solutions - arched-type extensions, prepared for installation in doorways.

Extensions and developed edging of the opening emphasize the complex shape of the opening, placing a visual emphasis on it

Trapezoidal

This form is used very rarely, due to the fact that in small areas such a solution gives reverse effect: the room does not expand, and the ceiling visually lowers. Especially in cases where the upper horizontal part of the trapezoid is too narrow. It may seem that when decorating the opening they wanted to make an arch, but did not have enough strength and skills.

Such an opening looks good when it matches the shape of the room located behind it, as in this picture

The polygon will fit well into the transition where double doors were planned or installed interior doors. Using drywall, you can easily and effortlessly turn a rectangular opening into a smooth trapezoid by securing it at the corners of the opening.

Asymmetric

A doorway that embodies the fantasies of the owners of a living space is an asymmetrical shape. Designers love it for its ability to bring the most amazing solutions to life. The opening ceases to be the boundary of two rooms, it turns into a decoration of the apartment, into an element that attracts the eye and emphasizes the given style.

An asymmetrical opening is the highlight of any interior

However, there are nuances here that many people forget about and encounter difficulties during the work process:

• you cannot undertake the expansion of the opening without creating a project where all the possibilities of load-bearing walls and ceilings will be taken into account;
• sharp corners and sharp shapes have a negative impact psychological impact on others; it is necessary to minimize the presence of irritating factors so that ennobled openings serve as an advantage and not a disadvantage.

Decoration with curtains

Simple but very interesting option decorating a doorway with curtains is a look into the past. Several decades ago, people demarcated their living space in this way, decorating the passage with wooden or fabric curtains. The desired effect was achieved: the boundaries of the room were visually outlined, without creating a closed space.

Curtain - a simple and effective solution

But similar solutions are still popular now, but the variety of shapes and materials has become much greater. The most commonly used are bamboo sticks, which are very durable and produce a pleasant sound when colliding with each other. You can paint them yourself in the desired shade or choose ready-made option to suit your interior.

You can use curtains anywhere, even on the border between the hallway and the bathroom, although this is a little intimate, but if home owners are interested in this option, then why not experiment.

The correct design of a doorway can highlight the interior and add zest to it. Therefore, when creating such structures, designers often resort to the most unexpected tricks. In order for the selected finish to fit harmoniously into the design of the room, it is important to clearly understand the best way to highlight this part.

Regardless of the type of structure, doors are required to enter it, as well as for communication between its rooms, which are usually installed in doorways. At the same time, to create a presentable appearance of the entrance structure and to treat the slopes, it is necessary to use extensions and platbands. They are panels that are designed to fill the missing width of the box and mask the slopes in the opening. Such products are attached to the frame and fill the space that is formed between the door frame and the other side of the wall. To complete the complex finishing of the wall, platbands are used. The immediate task of such elements is to frame and create a holistic design.

Advantages of interior openings without and with doors

In the table we consider the features of each option.

Opening without a door	Opening with a door
More space	Noise insulation
The visual effect of separating the rooms still remains	Thermal insulation
More light	Possibility to install a lock if necessary
Suitable for small spaces	Possibility to choose the option of doors with glass or plastic inserts for greater “lightness”
Frees up space for furniture
Can be decorated in an original way

Options for finishing a doorway without extensions, trim and doors

Often the opening is finished without installing a door leaf. This design move allows you to simultaneously erase the boundaries between rooms and at the same time visually make the room more spacious. To create a reliable and spectacular design interior design without doors does not have to be guided by standard options.

To design an interior doorway, you can use any material used for finishing walls and slopes.

In this case, decoration can be done using the following materials:

• drywall;
• clinker tiles;
• decorative rock;
• siding;
• plastic panels;
• textile.

To improve the internal perception of the interior, arched structures are often used. At the same time, if the room has standard ceilings, then arches with slight curves will look better here. It is better to decorate an interior passage without extensions and platbands in houses with high ceilings with classic arches in a non-standard design: trapezoidal, elliptical and asymmetrical. You can decorate the slopes with brick, wood, stucco, plaster relief overlays, sandstone or artificial stone.

Framing slopes with plasterboard

The option of decorating slopes with plasterboard is simple and budget-friendly. This material is easy to process and does not require a large amount of preparatory work. It has good adhesion, has a long service life and looks great on the wall.

The design with plasterboard is laconic

Decoration with clinker tiles

Due to the variety of colors and ease of use, clinker tiles are often used for wall decoration. It is convenient to tile the corners of doorways without platbands or extensions. This option is suitable for designing rectangular, arched and semi-arched structures.

Tiles give the room a special style

Decorating a doorway with stone

In the interior space, decorative stone allows you to hide all the imperfections of the wall, as well as transform the interior. The material is highly resistant to external influences, durability and excellent aesthetic properties.

Through the use of stone entrance structure becomes more interesting

Plastic panels

Using plastic, you can imitate the appearance and texture of natural stone, wood and expensive materials. Framing a wall with plastic can visually increase the size of the interior passage and ceilings. Cladding in this way can be done independently.

Plastic can imitate expensive materials

Siding finishing

Due to the textured surface, lining the doorway with siding looks advantageous in any interior. This material is distinguished by a variety of models and colors, ease of care and installation.

Textured surface siding fits perfectly into any interior

Use of textiles

For decoration interior designs Expensive and dense textiles can be used. This technique helps to hide the opening, distract attention and lighten the space a little. In this case, the textile fabric can be of any type, the main thing is that it ultimately harmonizes with the overall style of the room.

Finishing a doorway with a door

For some rooms, a clear delineation of space is very important. Therefore, it is customary to leave doors in them. When choosing the option of designing such a passage without additional panels and platbands, the designs should be selected in accordance with the color and texture of the door leaf. For this the following can be used:

• blinds;
• ceramic tile;
• tree;
• laminate;

Shutter doors

This idea has a double practicality. Firstly, shutter doors are very original, and often cheaper than standard doors. Secondly, the slats from the blinds can be used to decorate the doorway, which gives the entire structure a unified style.

Blinds in the opening add lightness and airiness

Ceramic tile finishing

Tiles have a number of advantages, such as ease of maintenance, big choice colors and patterns, durability.

The most important - beautifully trim and join the edges, for which you will need a special tool.

Tiles are the most practical option

Wood - an eternal classic

If you want your opening to look classic, and at the same time you are for naturalness, then wood is your choice.

Natural wood adds warmth and suits many design styles

Laminate - looks expensive

If you want something custom, durable and practical, laminate is a great choice. It is as easy to install as regular extensions with platbands, but it looks much more expensive.

A doorway without a door is sometimes an original way out when solving the problem of combining living space. For example, not all homeowners want to install a door between the hallway and the living room, especially if the layout of the apartment allows for it. The quite often practiced combination of a loggia with a room is also done by removing the window and door frame, which expands the usable area. However, both of the solutions given above as examples at the same time create new problem- original and neat design of the resulting opening.

Today the construction market offers a very wide range of various materials, allowing you to decorate your living space in any style and to suit every taste. Therefore, there should be no problems in implementing even the most intricate project. Moreover, you can get by with relatively little expense, and at the same time richly decorate the doorway with a beautiful and original platband.

There is no need to think that the design of this interior element is not as significant as, for example, the walls or ceiling. Until the last decorative details are installed, general form the premises will not have the required completeness.

Finishing materials for doorways

Modern designers have developed a large number of design options for doorways, which are made using different materials. These include the following:

• Decorative clinker tiles.
• Stucco molding made of gypsum, or its imitation made of polyurethane.
• Plastic panels.
• Fake diamond.
• Natural wood.

In addition to the finishing material itself, the chosen shape of the doorway itself can become a decorative detail of the interior. And it can vary from traditional rectangular options to asymmetrical complex configurations.

Finishing with any of the above materials can be done independently, having previously developed a design sketch and having the necessary tools and materials at hand.

Clinker tiles

One of the traditional solutions for finishing an opening is cladding with clinker tiles to look like brick.

Finishing doorways with clinker tiles has recently become a fairly popular trend - this can be explained by the variety of colors of this material and the ease of its use. Not only straight versions of tiles are produced, but also corner ones, which are convenient for lining the corners of doorways, and they are suitable for both traditional rectangular shapes, and for an arch or semi-arch.

Most often used for external facade finishing, but for certain rooms and doorways it will be perfect, especially if it harmonizes with the decoration of the walls. Sometimes, in addition, in combination with the doorway, the areas around the windows are also covered with the same material, thanks to which the room immediately acquires its own style.

Sometimes clinker tiles are used in combination with smoothly plastered walls.

Markings are made on the walls according to the drawn up sketch. This process is especially important if the tiles are laid out in a chaotic asymmetrical pattern.

The tiles are laid in different ways, creating a smooth edge or a jagged, stepped edge; they are often installed offset.

Before laying the tiles, it is recommended to additionally treat the area on the wall to be tiled, which will improve the adhesion of building compounds and guarantee that the material will be securely glued to the surface. The primer must be completely dry before gluing the tiles.

Clinker tiles are glued to tile adhesive or “liquid” nails - the adhesive composition is selected depending on the quality of the wall surface. If the wall has flaws or small irregularities, it is best to use tile adhesive. “Liquid” nails can only be used on a perfectly flat surface.

The glue is applied very carefully to the back surface of the tile. If a cement or gypsum-based mortar is used, then its excess must be removed immediately, and it is better to try so that it does not protrude beyond the boundaries of the tile.

It is very important to ensure that the tiles are laid exactly horizontally. This parameter must be controlled using building level constantly during facing work.

When the glue has set, these calibration strips can be removed from the seams and the masonry can be left until the mortar has completely dried.

After the glue has dried, the seams between the tiles are sealed with grout. suitable color harmonizing with the finishing material or the shade of the walls.

Fake diamond

Finishing with artificial stone is also quite stylish option, especially since the choice of this material is even much wider than that of clinker tiles. It is made from natural rocks, crushed into crumbs, to which various polymers and dyes are added.

Artificial material very reliably imitates the appearance and texture of natural stone - it can be limestone, malachite, shell rock, jasper, marble and other rocks. There is an option that is simply called “wild stone”, that is, without processing, which looks very original.

The colors of this material are varied, from cold gray to warm ocher, so it can always be matched to the shades of the interior.

The advantages of finishing surfaces with artificial stone include the following qualities:

• Presentable, aesthetic and stylish appearance.
• Excellent harmony with other materials.
• Resistance to mechanical damage when laid correctly.
• Long service life without changing appearance.
• Simplicity in daily care of finishing.

To decorate a doorway, they usually select compact sizes of artificial stone, with a not very deep relief pattern, otherwise it will look too bulky.

For corners, it is best to choose special corner elements that are easy to install and securely fasten to surfaces.

Finishing with this material is carried out in different ways - sometimes it is laid, maintaining an even border, but more often the “torn edge” design technique is used. Using this masonry method, the finish is more natural, original and does not look “boring”.

Of course, when choosing one of the options for placing tiles on the wall and in the opening, you need to rely on general style decoration of the entire room.

The artificial stone is fixed in the same way as clinker tiles, on one of tile adhesives or "liquid nails". It is necessary to take into account that this material is much heavier than tiles, as it often has a greater thickness, so the wall for its installation must be especially carefully prepared, be sure to treat it in several layers with a primer.

Cladding with artificial stone is quite labor-intensive work, since each of the elements must be glued to the wall and held for some time so that the composition sets. In addition, it must be said that this is a rather expensive material. However, it is worth it - the effect of a high-quality finish will be amazing.

Stucco molding, natural gypsum and artificial

Stucco molding around the perimeter of the opening without a door - columns with pilasters and capitals.

Nowadays, stucco inside modern apartments and houses can be seen quite rarely, although this is one of the most interesting styles design, including doorways. Naturally, stucco molding is not suitable for every interior - it must be designed in a certain style, and all elements in it must be harmoniously combined with each other.

However, if it is decided to design one of the rooms in a classical, Doric, Venetian or other similar style, where the presence of stucco elements is expected and would not be absurd, then decorating the doorway with it will certainly be “in keeping with the theme.”

Previously, gypsum was used to decorate rooms and facades, and columns were often made of natural limestone. Today, these interior parts are also made from polyurethane.

Plaster stucco elements are quite heavy, so they are quite difficult to attach to the walls. Installation is also complicated by the fact that gypsum in its hardened form is very fragile, and if it falls even from a small height or with careless actions during cladding, the finishing element can break into pieces.

Gypsum stucco is, of course, a “classic of the genre”, but working with it is quite difficult

Polyurethane is very light, adheres well and adheres to any surface.

It is much more convenient to carry out finishing - use polyurethane parts “under stucco molding”

A very wide range of different parts are produced to decorate a doorway - these can be borders, pilasters with capitals, or even full-fledged columns that are glued to the ceiling and wall.

The range of polyurethane parts with imitation stucco molding is very wide

The variety of shapes and relief patterns of these decorative elements allows you to choose them to suit any, most demanding taste. It is also very important that polyurethane can be easily painted, which can create an imitation of natural stone or make the surface of parts glossy and perfectly white.

Similar polymer parts are also produced for modern design- with a relief that does not have floral patterns, elements of columns and capitals, but is made in the form of moldings. Although they can also be combined with modest trims that will complement arched or straight elements.

This type of polyurethane finish can be disguised as natural wood or stone, painting them in the right color and varnished.

Installation of polyurethane parts can be easily carried out independently using one of the polymer adhesives, “liquid nails” or special “Moment” glue.

It’s probably worth noting that columns and pilasters are not particularly suitable for small apartments, since such details will overload the space, and it will seem even smaller.

If your house or apartment has high ceilings that make the rooms uncomfortable, you should round off the sharp corners of the doorway and choose an arched option for this.

In the case when a hall or hall in a large house is decorated with polyurethane parts, it is best to use columns decorated with Doric reliefs to create pomp and grandeur.

Plastic panels

Plastic kits for decorating doorways can even be purchased ready-made - they are produced for openings of different shapes: rectangular, arched and semi-arched, designed for different heights and widths. Platbands can be white or made with a textured pattern of one of the wood species, which can have different shades. Selecting the color of the platband to match the overall scheme of the interior will not be difficult, as well as installing them on the walls of the doorway.

Typically a finishing kit consists of the following elements:

• Platband, which is fixed with outside opening on the wall. As a rule, this element consists of three parts - a top bar and two side ones. If the opening is made in the form of an arch, then top part should be arched. If an opening is being finished that will be used without a door leaf, then the kit should include two trims, for one and the other side of the doorway.
• An additional strip that is mounted directly on the walls of the opening along its thickness and covers it completely.

• For an arched opening, it must also be made in a certain configuration. Some kits are made from fairly flexible plastic, so they bend perfectly to the desired shape. However, when purchasing such a kit, it is worth asking the seller to demonstrate the flexibility of the material right in the store.

Decorating doorways with just such a plastic kit is very popular, since it has relatively affordable price and has a number positive characteristics, which include:

• Ease of installation of elements, which will not be difficult to do yourself.
• Sufficient resistance to mechanical stress with careful use.
• Easy to care for, as the material does not accumulate dust and can be easily cleaned with a damp soft cloth.
• Possibility to disguise communication cables under panels. Some kits have a special entrance for them into the internal space of the platband, located at the level of the baseboard, and the design provides special channels for laying wires.
• Plastic panels give the doorway neatness and visually highlight it with an aesthetic frame.

Fastening of elements of plastic platbands and extensions to the walls is carried out different ways- this can be by gluing them to surfaces using “liquid nails”, and sometimes they are attached locking connections on special guides that are included in the finishing kit.

Wood finish

Wooden trims are traditional for finishing door and window openings, but not many people know that they can have a variety of shapes and designs. Of course, those with decorative elements, cut by hand or using special equipment, will not be cheap, but they will also be used for a very long time.

If necessary, wooden trims can be repainted, for example, if the entire interior of the room changes, including the color of the walls.

Wooden finishing materials can be selected to suit any design style - they can look very simple or be decorated with figured carvings. An important advantage of the material itself and products made from it is its environmental friendliness.

In addition, it should be noted that even the most inexpensive wood, but well processed and covered with the necessary means to preserve the material, as well as decorated paint and varnish compositions, it will be impossible to distinguish it from expensive wood. Carrying out these processes is not at all difficult, so you can save on them by purchasing or ordering the frames in an unprocessed form to the master.

Despite the appearance large quantity new types of materials from which platbands are made, wood will never lose its popularity and is often chosen to design doorways of any shape.

Doorway shape

Since the shape of the doorway plays an important role in interior design, especially if it is not planned to install a door on it, this parameter should be considered separately. The configuration of the doorway may be familiar to many - rectangular, emphasizing the classic style - arched, asymmetrical, trapezoidal and other shapes.

Arched doorway

The arched configuration has recently become especially popular when constructing a doorway without a door. This form has become widespread for decorating passages both in standard apartments and in large private houses.

The advantage of this shape is that it softens sharp corners. Visually, the arch makes the ceiling higher in an apartment, and “lowers” ​​it somewhat when the ceilings in mansions are too high. If you need to visually “lower” the ceiling, making the room more comfortable, you only need to slightly widen the arched opening, making it almost completely semicircular, without vertical sections.

In addition, such an arch will expand the space, and both rooms united by it will look much larger.

An arched opening is usually installed between the living room and the kitchen or hallway. This solution makes the design original and the interior more interesting. Each apartment owner, performing installation independently, gets the opportunity to make it exclusive.

This type of opening is also ideal for combining a loggia with a living space. Thanks to the expansion of the arched structure, the room will visually appear larger than it actually is.

Try making an arch yourself!

Drywall in skillful hands turns into truly universal material, opening the broadest opportunities self-creation the most complex interior elements. For a diligent and careful apartment owner, manufacturing should not be particularly difficult. To help him, there is a special publication on our portal.

Video: a variety of interior solutions with an arched opening without a door

Trapezoidal opening

A doorway of this shape cannot be called popular, and it is quite rare to find it, especially in a city apartment. It must be said that such a frame, especially if it has a dark shade, has a somewhat depressing effect on the psyche. It may be more rational to use such a form in large rooms, where it will not become the compositional center of the design, but will neatly fit into it along with other decorative elements.

The appropriateness of a trapezoidal opening in a residential area is highly questionable

If, nevertheless, it is decided to use this form to design an opening in an apartment where the ceiling is not very high, then you should not make the upper horizontal part of the trapezoid too narrow. Such a shape will not only visually narrow the room and lower the ceiling - it will seem to weigh down the interior and, oddly enough, spoil the mood.

Such “hard” forms can negatively affect a person’s psycho-emotional state

The absence of smooth shapes in the doorway will make the room uncomfortable, even if it general design Wallpaper or other decorative finishes in warm colors will be used. Therefore, if you choose the shape of a doorway without a door, then it is better to immediately abandon this option.

Asymmetrical opening shapes

There are a great many options for asymmetrical openings - they can have smooth, angular shapes or combine several of the configurations. When choosing fancy lines for an opening, you need to remember not only about the supporting structures of the house - it is not always possible to widen the opening to the expected width.

Asymmetrical openings - the widest field for the owners’ fantasies

Very important point- this is the psychological impact of forms on the mood of residents. If you don’t want constant clashes, irritability and misunderstandings in the family, it is best to avoid sharp corners and sharp shapes of doorways. If you still cannot do without such outlines, then they need to be smoothed out by placing smooth rounded transitions and shapes nearby.

Due to the fact that today in the construction markets you can find not only ready-made arched or asymmetrical kits for decorating openings, but also a lot of other materials, designers and amateur finishers are creating the most unrealistic decorative configurations. One of the materials that is most often used for such work is drywall. It is used for cladding structures made from galvanized metal profiles. These Construction Materials They have a very affordable price, but to make complex, decoratively designed interior transitions, you will have to put in all your efforts and spend a lot of time, as well as seriously work on the project first, adapting it for a specific doorway.

Drywall – unique material for the construction of walls and partitions.

When planning a redevelopment, erecting new partitions or reconstructing existing ones, it is best to rely on the use of plasterboard. A special publication on our portal is devoted to the process of independently creating internal ones.

To summarize, it should be noted that the above options for designing doorways without installing door panels are by no means the only possible ones. It is quite possible to independently develop and implement your own own project design of this interior element. In this case, it is necessary to take into account the structural structure of the entire structure, since an expanded doorway in some cases can weaken load-bearing walls and overlap, which is extremely dangerous not only for residents of the upper floors, but also for those living in the reconstructed apartment.

If any doubts arise when drawing up a project, then it is best to contact specialists to make calculations or even complete all the work. They will determine the capabilities of load-bearing structures and calculate the permissible limits for the expansion of doorways without compromising general design the entire building.