How to disable disk protection in windows 8.
Hello, friends! In this article we will understand how to enable Windows Defender 8. We have already looked at antivirus. With the release of Windows 8, Microsoft abandoned the development of Microsoft Security Essentials and transferred all of its functionality to Windows Defender 8. The latter comes bundled with the operating system. When installing third-party antivirus tools, the defender is disabled. When you uninstall a third-party antivirus, it should turn on. Windows 8 Defender does not always turn on. And often such problems happen with computers or laptops with Windows 8 pre-installed. A trial version of some antivirus is usually installed there, and the defender is disabled. We will discuss how to enable Windows Defender 8 below.
Opening the Help Center
Left-click on the icon in the notification area and click on the link Open support center
You can also open the Action Center by searching from the Start menu.
Open if necessary Security tab and press any button Enable now
Windows Defender 8 starts immediately for me. It may not be updated for you. Click Update, wait, and your virus protection works.
Using Windows Defender 8
Unlike Microsoft Security Essentials, Windows Defender 8 cannot configure the frequency and type of scan (full or quick). It seems to me that a quick check is performed every day when the computer is idle. The defender is also updated automatically. All we have to do is run when necessary:
- Special check (Selective) (for example or )
- Full scan (I run it when the computer is not working properly)
By default, I have Basic membership enabled MAPS(Microsoft Active Protection Service). To more actively help Microsoft in the fight against malicious code, in Settings > MAPS, select Advanced Participation Level and click “Save Changes.”
For more reliability, on the “Parameters” tab in the “Details” section, I check two additional checkboxes:
- Check removable media;
So that during a full scan, all connected devices are immediately scanned and a restore point is created for a possible rollback
I don't include anything as an exception.
Pin Windows 8 Defender to the Start screen
For convenience, you can pin Defender to the home screen (in). Open the Start menu, write “defender”. On the found element " windows defender"Right-click and select " To Home screen»
Windows Defender is a full-fledged antivirus program that reliably protects your personal computer in real time. The service periodically checks all files on hard drives for infection, automatically removes viruses and places infected data in quarantine mode. Quarantine allows you to disable the execution of malicious code while the utility searches for cleaning tools.
In addition, the program quickly checks all connected external data sources, preventing viruses from spreading throughout the operating system, and blocks attacks from the Internet. The software updates itself automatically.
Activation
On many installed OSes this utility is disabled by default. This is done to give users a choice: use built-in protection or rely on third-party developers.
You can also create a shortcut to the utility to quickly launch it, if for some reason you need to temporarily disable it. To do this, right-click on the program icon and select the “Create shortcut” action in the drop-down context menu.
Immediately after turning it on, it is recommended to scan all hard drives with a full scan. If you have USB drives, you can check them at the same time. The procedure time depends on the size and load of your disks, as well as the speed of your PC.
Deactivation
If you are not satisfied with the operation of this program, you can disable it. To do this, you need to follow steps 1-3 of the previous instructions and deactivate the protection against viruses and spyware. Immediately after this, it is strongly recommended to install another antivirus, since leaving your computer defenseless is extremely dangerous.
There are times when the antivirus needs to be turned off for a short time (for example, while installing some programs or to “hack” pirated software). In this case, there is no need to go into the security settings and completely complete the process. To do this, you just need to open Defender and go to the “Options” tab. Next, open the “Real time” section and uncheck the only option.
Good afternoon, dear readers of my blog! Today is my last day (like many others) of the New Year holidays and tomorrow I’ll go back to battle. Well, while it’s still a day off, I’d like to talk to you about protecting your Computer. Do you use an antivirus? If so, which one?
It’s just that many of my friends who use Windows 8 didn’t even know (and I myself didn’t know for a long time) that the system has a built-in Windows Defender. This is essentially the same Microsoft Security Essentials, which could be downloaded from the Microsoft website and installed on seven, but now it is built-in.
If you do not have any antivirus installed, then it may well pass for one. Moreover, it catches various threats quite well, so don’t think that since it’s built-in, it’s lousy. But if you still prefer some third-party antivirus, then it is better to disable this defender so that it does not consume unnecessary resources and thereby slow down the computer.
In general, sit down comfortably, crack your fingers as usual, and in the meantime I’ll tell you how to disable Windows 8 Defender or start it.
What is Windows Defender
What is Windows Defender and why is it needed? Windows Defender is a built-in system tool to protect your computer from bots, Trojans, worms, spyware and other malicious content. The program contains a scanner that allows you to check several types of operating systems, from quick to complete. The application also includes several modules that provide real-time system protection. Thus, if any virus penetrates the RAM or hard drive, Defender will immediately notify the user and offer to clean up the suspicious code. In addition, this antivirus includes an update mechanism, thanks to which you can download the most current versions of databases with spyware and virus detection from the official Microsoft server in two clicks.
How to enable or disable Windows Defender
By default, after installing a new system, Windows Defender is active. If, while working on the system, you find that calling some of the applications you need is blocked by Defender, but you still have to use them, or you have another antivirus installed, then Defender can be disabled. How to do this?
So, you have worked for some time without using Defender, and you want to activate this applet again. Next, I will tell you how you can re-enable this service after disconnecting it.
But not everyone is satisfied with this standard defender, so if you don't want to pay, I would recommend taking a look, which I reviewed in one of the previous articles. They are all very good and you can choose something for yourself.
And by the way, an antivirus is a very good protection, but there are times when even the coolest, most expensive and powerful of them is not able to cope with the virus, then you can easily lose important files, documents, etc. Yes Yes. I remember how a bad virus (new at that time) entered my work, which renamed the extensions of all documents on the computer. This was a set-up, despite the fact that there was a paid antivirus and everything was checked weekly.
The virus stupidly changed file extensions to a certain “vault”. And even if it did, it didn’t lead to anything. The documents were already damaged. Have you heard of this one? Back then it was new and not a single antivirus program knew it yet.
My partner and I tinkered with this crap for more than 3 hours, but all we managed to do was restore about 30% of the files. It took a lot of nerves and using a lot of programs to restore damaged files, and restoring from shadow copies helped a little. Fortunately, at least most of the most important documents were restored.
But what am I getting at? It is better to always back up your system and your most important files and documents. Then you definitely won’t have to worry about important data. This topic is best explored in the stunning video course on backup. Everything is laid out, explained in detail and understandable to any category of user. I strongly recommend that you watch it and apply everything to yourself.
Well, this is where I end our article for today. I hope that you found it useful and interesting. Come back for a visit so you don’t miss anything interesting, and don’t forget to subscribe to updates. Well, I say goodbye to you. Bye bye!
Best regards, Dmitry Kostin
The standard Windows Defender antivirus does not require separate steps to disable it when installing a third-party antivirus into the operating system. It doesn't turn off automatically in 100% of cases, but in most of them. Just as it is automatically disabled, Defender itself is also enabled when a third-party antivirus is removed from Windows. But there are times when the system must be deliberately left without an antivirus - both a third-party one and a regular one. For example, temporarily to make certain settings to the system or installed software. There are also cases when PC protection must be abandoned completely. If your computer is not connected to the Internet, there is no point in wasting its resources running an antivirus. How to disable Windows Defender temporarily and completely? We will look into this below.
1. Disabling Defender on Windows 7 and 8.1
In Windows 7 and 8.1, it is easier to get rid of standard antivirus protection than in the current version of system 10. All actions are performed in the Defender application window.
In Windows 7, in the Defender window, you need to click “Programs”, then select “Options”.
To disable Defender for a while, in the settings section, open the vertical tab “Real-time protection” and uncheck the real-time protection option. Click “Save” at the bottom of the window.
To disable Windows Defender completely, in the “Administrator” tab, uncheck the box next to “Use this program.” Click “Save”.
Approximately the same steps must be carried out in Windows 8.1. In the horizontal Defender “Settings” tab, disable real-time protection and save the changes made.
And to disable the standard antivirus completely, in the vertical “Administrator” tab, uncheck the “Enable application” box. Save the changes.
After you disable Defender completely, a notification about this will appear on the screen.
You can turn Defender back on using the appropriate links in the support center (in the system tray).
An alternative option is to enable Defender in Control Panel. In the “System and Security” section, in the “Support Center” subsection, you need to click the two “Enable now” buttons, as indicated in the screenshot.
2. Disable real-time protection in Windows 10
In the current version of Windows 10, real-time protection is removed only temporarily. After 15 minutes, this protection turns on automatically. In the Defender window, click “Options”.
Let's get to the "Settings" section of the application, where Defender settings are made. These include a real-time protection activity switch.
3. Completely disabling Defender in Windows 10
Complete disabling of Windows Defender in version 10 of the system is carried out in the Local Group Policy Editor. In the “Run” command field or in-system search, enter:
Next, in the window on the left, expand the tree structure of “Computer Configuration”: first “Administrative Templates”, then “Windows Components”, then “Endpoint Protection”. Go to the right side of the window and double-click to open the “Turn off Endpoint Protection” option.
In the parameter window that opens, set the position to “Enabled”. And apply the changes made.
After which, as is the case with Windows 7 and 8.1 systems, we will see a message on the screen stating that Defender is disabled. The way to enable it is the opposite - for the “Turn off Endpoint Protection” parameter you need to set the “Disabled” position and apply the settings.
4. Win Updates Disabler utility
The Win Updates Disabler tweaker utility is one of the many tools on the software market for resolving the issue with . In addition to its main task, the utility also offers some related functionality, in particular, disabling Windows Defender completely in a couple of clicks. Win Updates Disabler itself makes the necessary changes in the Group Policy Editor. The utility is simple, free, and supports a Russian-language interface. With its help, you can disable Defender in Windows 7, 8.1 and 10. To do this, on the first tab, you need to uncheck the options that you are not interested in, and check only the option to disable Defender. Next, click the “Apply Now” button.
After which you need to restart your computer.
To enable the standard antivirus, in the utility window you need to uncheck unnecessary options again and, by going to the second “Enable” tab, activate the option to enable Defender. As with disconnection, then click “Apply now” and agree to reboot.
Have a great day!
How to enable Windows Defender on Windows 8 Or is it already turned on and working? How can they check a suspicious file or folder? There are many sites on the Internet that describe the operation of this antivirus built into Windows 8, but it is impossible to ask a question on any of them; comments are disabled everywhere. In short, this is my story. I recently bought a laptop with Windows 8, immediately installed an anti-virus program on it, then I learned from friends that Windows 8 already has a built-in Windows Defender anti-virus program from Microsoft, I want to leave it and uninstall the one I installed, why do I need two anti-virus programs on my computer. But I can’t enable Windows Defender in Windows 8, I just can’t find it anywhere, it seems to me that this built-in antivirus is completely missing in my eight. Sergey.
How to enable Windows Defender on Windows 8
In our article we will tell you how to enable and how to disable, if necessary, the Windows Defender antivirus built into Windows 8.Enable Windows Defender very simple, but if you have a third-party antivirus program installed on your computer, you must first remove it from your operating system, otherwise an error will appear when you turn on Windows Defender. " Windows Defender is disabled and is not monitoring your computer. If you use another app to monitor for malware or unwanted software, use the Action Center to check its status."
Therefore, if after purchasing a computer with Windows 8 pre-installed, you installed an additional antivirus, remove it. Then turn on Windows Defender.
So, the installed antivirus has been removed, turn on Windows Defender. Right-click in the left corner of the desktop and select "Control Panel"
In the "Search" field enter Windows Defender or Windows Defender
and here you go, our built-in antivirus has been found.
Click on it with the left mouse and run it. Or you can create a shortcut on your desktop for ease of launch. Right-click on our antivirus and select “Create shortcut”. If the antivirus does not start, read on.
Right-click in the right corner of the desktop and select “Control Panel”
then "System and Security"
"Support Center",
"Safety"
Virus protection- click "Enable now".
That's it, our built-in Windows Defender antivirus is now enabled and working
Launch Windows Defender. The main window of the program. Home.
In this window you can check your Windows 8 for malware. Scan parameters:
Fast – a quick scan checks the areas most often susceptible to infection by malware, such as startup objects and temporary files.
Full – all files on your hard drive are scanned.
Special – the files and folders you select are scanned for the presence of viruses. Select the folders you need to scan. I advise you to always scan your drive (C:) for viruses.
Updates. Windows Defender updates automatically.
Here you can see all the malware detected by Windows Defender Antivirus. You can remove them permanently by ticking all viruses and clicking “Delete”.
If suddenly the antivirus makes a mistake (which happens extremely rarely), you can restore the file you need by checking the box and clicking Recover.
Options.
To ensure that your antivirus always protects you, I advise you to check the “Enable real-time protection” option.
Windows Defender will reside in RAM and monitor everything that happens in your Windows 8. How it happens.
For example, you tried to copy a file infected with malware from a flash drive, the built-in Windows Defender antivirus will automatically remove the virus from your computer and from the flash drive too.
If you are interested in more complete settings, you can read our article "".