How to properly inflate a soccer ball. How to inflate a soccer ball

Playing football in the yard or outdoors is a young thing: even if you are over 50, by regularly playing sports you will feel like you are in your 20s. But what to do if the ball you took with you is deflated, and the question arises of how to inflate the ball without a needle and pump in makeshift conditions (beach, nature, someone else’s yard)? Naturally, it would be better to take care of this and take with you a bicycle pump and a needle (the cost of which is no more than 150 rubles).

But, if the above equipment is not at hand, all is not lost! But remember that the methods listed below are far from the safest for your ball: it can simply be overinflated and ruined, so if we are talking about a rarity with the autograph of your favorite football player, then it is better to postpone such manipulations.

How to inflate a ball without a needle: the “medical” method

Advantages: low cost of the method, availability of materials. Everything can be found in a roadside pharmacy and the glove compartment of a car.

Disadvantages: in the outback there may not be a similar pharmacy. In addition, the instructions below are not an answer to the question of how you can inflate a ball without a needle: these are instructions on how to make such a needle.

The essence of the method

If trouble overtakes you on the road, then, with some effort and a little ingenuity, you can inflate the ball using simple electrical tape and a syringe needle. The needle must first be blunted: it should not pierce the nipple, but smoothly enter it. Needles from blood transfusion systems are ideal: they are quite thick and durable. The tip of the needle should be dulled on asphalt or a knife sharpener. The result should be a needle with a blunt end, which will serve as the basis for the adapter from the pump to the ball. Next, carefully wrap electrical tape around the base of the needle. It will take about 12 layers. This is done so that the needle fits tightly into the pump hole.

The road method: how to inflate a ball without a needle using... a car service

Advantages: quite effective method pumping up a deflated car on the road Auto service assistants will come to your aid and will be happy to help for a purely nominal fee. In addition, many may have the necessary needle. The method is suitable if you have neither a needle nor a pump at hand.

Disadvantages: a car service center may not be nearby at the right time. An inexperienced worker can overinflate the ball, which can cause it to burst from excessive pressure if inflated carelessly or during play.

The essence of the method

It is known that the most popular service in car services is tire inflation. The compressor used for this can supply air at high pressure, which is what we need. The deflated ball should be pressed very tightly against the compressor nozzle and inflated until the desired level of hardness is achieved. The density should be monitored very carefully to avoid over-inflating or exploding the ball. It is better to carry out the procedure with three people: two press the ball, one should turn off the compressor at the signal. By the way, on many modern models Compressors have a nozzle for inflating balls.

We give air injections: how to inflate a ball without a needle: an alternative but very grueling way

Advantages: Another “medical” method, but this time requiring neither a needle nor a pump. All you should have on hand is a car first aid kit with a syringe and a few hours of time, depending on the volume of the syringe found.

Disadvantages: the method is exhausting and inconvenient. You can permanently damage the nipple of the ball, and it will deflate if you do not use special oil.

For those who don’t have either duct tape on hand or a car service on the road, there is another way to save a beach volleyball or street football tournament. The idea is to inject air into the ball through a simple syringe. The volume of work to be done depends on the volume of the syringe: with a 20 cc syringe you can inflate the ball in about half an hour. 10 Ml - per hour. 5.2 Ml - is it worth the trouble?.. This is the most accessible and homemade way to pump without a needle, without having a compressor at hand. To facilitate insertion of the syringe and preserve the ball, the nipple should be moistened with oil.

If there is a needle, but no pump

Advantages: Quite a fun and creative way to pump. Pump the ball up to required density, most likely, it will not work, but the pleasure from the process is guaranteed! In addition, the method is suitable for soft beach balls.

Disadvantages: need to find a strong one or a bottle. The need to make an adapter.

There are those who don’t know how to pump up soccer ball without a needle. But the lack of a needle is, as it becomes clear, a third of the problem. The worst situation is for those who, for some reason, cannot use a pump, since it is still possible to create a high one using improvised means, but directing it to a certain point (the ball) is very difficult. You can use a plastic bottle or a thick bag as a compressor. Some craftsmen manage to solder a needle into the cap of a bottle and pump the ball over and over again while standing or carefully jumping on this bottle.

After the air from the bottle passes into the ball, the structure is taken out, another portion of air is pumped into the bottle and the manipulation is repeated. And so - until the bitter end!

There is a more advanced method using vinegar and soda: vinegar and soda are poured into the same bottle, and the ball is pumped carbon dioxide. But this is provided that the needle is firmly sealed into the bottle cap.

As we can see, there are a lot of ways to inflate a ball without a needle. None of them are comfortable and easy, but a true athlete is one who, despite all the obstacles, goes to the bitter end!

Probably, each of you wondered how to maintain the nipple of the ball, how to properly inflate the ball? Unfortunately, I couldn’t find anything intelligible on the Internet. But today, we have come to the point where we can tell you about all the subtleties that arise when inflating a ball with a pump. Go:

1) Use ONLY a special needle that is designed for inflating balls (see picture below) The needle should be smooth and without any scratches or burrs, they will significantly reduce the life of the nipple. Do not try to inflate the ball without a needle by simply pressing the pump/hose. IN best case scenario you won’t succeed, in the worst case, the nipple will fall inside the ball and you will end up in need of a ball repair or a new ball.

2) You need to insert the needle STRICTLY VERTICALLY, after dipping the needle into a special lubricant. Lubrication will help extend the life of the nipple and maintain its elasticity (lubricant will soon be available for sale in our group - https://vk.com/sosokservice). As a last resort, spit liberally on the needle! If you insert the needle at an angle, you instantly damage the nipple - you tear it in the wrong place. The nipple is actually very soft and can easily be accidentally damaged.

3) While inflating the ball, the needle must not be allowed to move in ANY direction inside the nipple. No back and forth! Don't swing to the sides! This causes the nipple to gradually rupture.

Of course, it is impossible to firmly fix the needle while inflating the ball so that it does not move left and right, but the less the needle “plays” inside the nipple, the longer it will live!

4) Upon reaching required pressure, smoothly, without sudden movements, remove the needle. Voila, you have inflated the ball correctly!

— Excessive pressure does not affect the service life of the nipple. It only affects the geometric parameters of the ball.

— The fewer times we insert the needle into the nipple, the longer it will live, for this it is advisable to use a pump with a built-in pressure gauge to immediately pump up required pressure. The fewer times we completely deflate and inflate the ball, the longer the nipple will live - because rubber also oxidizes! We have observed a crumbling nipple many times for two reasons - oxygen and ultraviolet radiation. Hence, do not store balls in direct sunlight.

— Don't store balls in the cold, for example, in the car in winter. Every winter they often bring us brand new balls for repairs. The reason is that in the cold the air inside the ball compresses, and when they go into the gym they try to pump up the ball in order to start training. But they forget about something important - in the cold the nipple also becomes rougher, losing its elasticity. As soon as you insert a needle into a frozen nipple, you risk severe damage to the nipple. If you pump the ball after frost, then after long storage at room temperature.

P.S. We allow you to copy the text completely and without changes and use it on behalf of our blog.

The durability of the product depends on proper inflation of the ball. If you have a ball lying around that hasn’t been used for a long time, it’s time to put it into combat readiness using possible improvised means. To avoid a recurrence of such a situation, it is recommended to purchase sports equipment for the future. As a rule, the kit includes a pump, a needle, and silicone lubricant. Today we will talk about how to inflate a ball without a needle in “Spartan” conditions. Let's consider important aspects in order and give practical recommendations.

Method number 1. Syringe needle, bicycle pump, electrical tape

1. A positive feature of this method of inflating a ball without a needle is the relative availability of materials. You can buy a syringe at any pharmacy, electrical tape at a hardware store, and a bicycle pump can be found in almost every home.
2. A negative characteristic is that it may not always be at hand the right pump and even more so a syringe. The guide below will help you make a needle for the ball so that you can subsequently inflate the product with the resulting “tool”. So let's get started.
3. Take a needle from a syringe, sharpen it on the asphalt or curb, use a knife sharpener. It is important that the tip is blunt and not pointed, otherwise the needle will pierce the nipple, exposing the ball to damage. She should enter it smoothly, and not jump in in an instant. If possible, use a medical needle with a wide diameter (blood transfusion system), it is strong enough and does not bend or break.
4. After sharpening the needle, wrap electrical tape around its base so that when it enters the ball, the air does not escape back. As a rule, 10-12 layers are enough to create a kind of adapter that will allow you to inflate the product quickly. All you need to do is insert the needle into the pump and then begin the procedure.

Method number 2. Compressor

The method is especially relevant if you need to inflate a football or volleyball while on the road.

1. The advantage of this method is that in almost every locality you will find a car service center. The guys will help you pump up the ball for a nominal fee, or they won’t charge you a penny. In this case, they may have a needle the right size, which cannot but rejoice. The method is suitable if you have absolutely no tools for pumping up the ball.
2. The disadvantage of this method is the possible incompetence of car service workers who, through negligence, can overpump the product. Such an oversight will lead to an explosion and damage to the ball, but it’s still worth the risk.
3. Many car services pump up tires, and gas stations also provide similar services, and completely free of charge. With the help of a powerful compressor, the air flow comes out under pressure, which is what you need.
4. Bring the hose with the nozzle to the surface of the deflated ball, press firmly and turn on the device maximum power. Pump the product until it becomes sufficiently hard. If possible, carry out the procedure together: the first person turns the compressor on/off, the second holds the ball and presses the cord, controlling the degree of inflation. It will not be superfluous to know that many modern compressors are equipped with a special nozzle for pumping balls.

Method No. 3. Syringe

1. The technology of inflating a ball using this method is rightfully considered exhausting. The method is an alternative to the first option, but to implement it in reality you will only need a syringe (preferably a large one) with a needle and 2 hours of free time. The duration of pumping depends on the volume of the syringe that will be used for the procedure.
2. Perhaps, this method doesn't have positive characteristics. Unless, eventually, with patience, you will be able to pump up the ball. A negative feature is the fact that the method is very tedious, time-consuming and unprofitable. You risk damaging the nipple, as a result of which the ball will constantly deflate (if you do not use silicone lubricant).
3. The essence of inflation in this way is that air is introduced into the cavity of the ball using a conventional medical syringe large volume. If the syringe is 20 cc, you will inflate the product in 30-40 minutes; in the case of ten cc instruments, it will take about 60-120 minutes.
4. To carry out the procedure correctly, lubricate the nipple with silicone oil or any other alternative means. Fill the syringe with air, insert the needle into the corresponding hole, and press the lever. Take out the tool and repeat the steps until the ball is inflated to the desired state. If desired, you can pre-sharpen the needle so that its free edge becomes dull.

How to inflate a ball with a needle without a pump

If you find a needle or make one on our own, but there was no pump at hand, this method just for you.

1. First you need to make an adapter. An ordinary plastic soda bottle serves as a homemade pump. If desired, you can replace the container with a very dense plastic bag no holes.
2. Screw the needle into the bottle cap or solder it using the appropriate tool. As you can see, you have an adapter, now screw on the cap and check if any air comes out.
3. Lubricate the nipple with silicone-based oil, insert homemade unit. In a convenient way(with your hands or feet) squeeze the air out of the cavity of the container so that it goes into the ball. Pull out the needle, inflate the bottle, repeat the previous manipulations until the desired effect is obtained.

There are not many ways to inflate a ball without a needle, but this does not mean that the idea is a failure. Use a medical syringe, electrical tape and a bicycle pump. Ask the car service center to pump up the product using a compressor and install a nozzle on the bottle.

Video: how to inflate a soccer ball if there is no needle

Regardless of the purpose for which the ball was purchased (playing football, gymnastics, etc.), it should perfectly cope with the functions assigned to it. However, regardless of their purpose, balls deflate sooner or later, and everyone should know how to inflate a ball, taking into account its unique characteristics.

It is very convenient to pump up the ball with a car pump, which usually includes a plastic nozzle that is used to blow dust out of the ball. hard to reach places. By attaching the plastic tip to the nipple, you can easily inflate the ball.

If you are inflating a non-soccer ball, in order to prevent it from losing its original shape, you should not sit on it or kick it. If it is necessary to use a needle for the pumping process, then first a couple of drops of special oil are applied to the nipple hole, and then the needle is inserted. Oil is necessary to protect the walls and valve of the nipple from possible damage from the needle. To prevent drying and provide elasticity. The ball should be inflated to the value indicated next to the nipple.

It is not recommended to use oils not intended for inflating the ball, as they can destroy the nipple. The pumping needle must be perfectly straight. And using a pressure gauge to monitor internal pressure will help avoid over-inflating the ball.

How to pump up a gymnastic ball

A special pump is used to inflate gymnastic balls, which most often comes with the ball, but can also be sold separately. In situations where there is no special pump, a bicycle pump is perfect for inflation. Only in this case, it wouldn’t hurt to stock up on a special needle for balls.

How to inflate a ball without a needle

In situations like this, when you need to inflate the ball and don't have a needle, using a medical needle or an empty and clean ballpoint pen that doesn't have a metal core can be a great solution. In order to homemade device fits tightly into the pump tip, it (the tip) should be wrapped insulating tape until the required diameter is formed. When using a sharp needle, it is important not to pierce the product.

In the section on the question How to inflate a soccer ball without a needle if you have a pump? given by the author I-beam the best answer is mouth

Answer from *Chamomile*[expert]
Look for a replacement needle!

Answer from Amal Utarbaev[guru]
I think you can't do without a needle

Answer from Simpleton[guru]
You can use a medical needle, this is how I pumped it up.
you wrap the plastic end of the needle with electrical tape until it sits perfectly in the crack of the pump hoses, and then you poke the sharp end of the needle into the hole of the ball and pump.

Answer from philosopher[guru]
go to the store and buy a normal pump with a needle

Answer from Alexander Savchenko[active]
There is such a simple device as a pen. First, unwind and remove the ampoule, then larger diameter we attach it to the pump hose, and the smaller one to the hole into which the needle is usually inserted, and begin pumping. Depending on the type of pump, sometimes it is extremely inconvenient to pump the ball using this method alone.

Answer from YAMAZAN[newbie]
not an option

Answer from Anna Ivanova[newbie]
it won't work out

Answer from Nolina Barieva[newbie]
Even the lack of a pump shouldn't stop you. The main thing is that you have a needle or something similar to it at hand (pick up an empty pen rod of a similar diameter). Just a small matter: you need a strong plastic bag. Make sure there are no holes in it, make a hole in the bottom and secure a needle or rod in it with tape, as shown in the diagram. Now fill the bag with air and tie the neck tightly. Gently squeezing the bag in your arms, you can transfer the air from it into your sports equipment.