How to disassemble a plastic window with your own hands - instructions for use. How to disassemble a plastic window with your own hands video Assembly and disassembly of metal-plastic door windows

Dismantling plastic windows is a process that the owner of any home faces at least once in his life. Most often, this action must be performed when replacing old windows with new ones or when replacing a damaged profile; Often, after purchasing an apartment, plastic windows from the developer are immediately replaced with more expensive, thicker and higher quality ones. Even if you are not going to do the work yourself, knowing how it should be done will not hurt.

Which windows to choose?

Depends on the needs of the owner, the climate characteristics of the region in which the construction site is located. If you live in a warm region, then there is no point in installing too thick double-glazed windows: this will make repairs more expensive, but will not add practical benefit.

When choosing a window, you should not skimp on quality, because if you consider how much it costs to dismantle a window and then purchase a new one, the difference will not be in the most favorable direction. It turns out that buying something more expensive right away, but quality window more profitable.

For middle zone In Russia and more northern cities, it is recommended to use triple glazing or a product of greater thickness. Of course, you need to focus on price and quality. Modern windows PVC ones last quite a long time, at least 50 years, so by immediately choosing a high-quality and stylish design, you will ensure comfortable living for many years.

If you already have plastic windows installed, but are not satisfied with their design or color, you do not have to dismantle the plastic window and replace it with another one. You can use a variety of films or paints and refresh the frame, adapting it to the desired interior style. Glasses are also replaced individually.

How is dismantling done?

– not the best difficult task, especially if you don't need to keep the window intact. Do-it-yourself dismantling of plastic windows is quite affordable if you have matching set few tools theoretical knowledge and enough time.

It is more convenient to do any work together. Plastic structures have an impressive weight, and one person cannot always handle them.

Like any other work, dismantling and installation must begin with preparatory stage. Please note that when removing the window there will be a lot of dust and debris, so in advance you need to not only clear access to the window opening by removing all obstructive furniture, but also, if possible, remove interior items from the room or at least cover them with a protective film. It is better to remove carpets and other surfaces that can easily absorb dust from the room.

List of tools that will be required for work:

  • A utility knife or any sharp kitchen knife.
  • Putty knife.
  • Chisel.
  • Several screwdrivers.
  • Small crowbar.
  • Screwdriver.
  • Hammer or powerful drill.
  • Hacksaw for metal.
  • Chisel.
  • Hammer and pliers.

First stage of work

First of all, regardless of which plastic windows are planned to be dismantled (fixed or opening), it is necessary to remove the double-glazed window from the frame. This will not only make the work easier, making the window much lighter, but will also make it safer. If the glass unit is of no value, is damaged, or you plan to cut the frame and throw it away, you can simply knock it out, but this will lead to small glass falling on the floor. It will be difficult to get rid of them, so in any case it is recommended to carefully remove the structure.

If the window has opening sashes, they must be removed. To do this you will need to unwind the loop; this is not difficult to do - you need to remove decorative overlay from the hinge, then unscrew the adjusting bolt and release the element. It’s more convenient to start with the bottom one, then unscrew the top one. In order for the sash to be removed, it needs to be lifted up slightly. This method of removing a PVC window will not only make the structure lighter and make it easier to remove, but will also eliminate the need to adjust the window if you mount it somewhere else.

If the hinges have a design that does not allow the sash to be released in the indicated way, simply unscrew the entire hinge from the frame and remove it along with the sash: usually the structure is held on by self-tapping screws.

Dismantling a window, if it is solid, is carried out according to the same principle, but since the sashes do not open, you just need to pull out the double-glazed window. To do this, you need to pull out the beads that secure it. The longest one, located on the side of the room, is pulled out first. To make it convenient to remove these elements, you can use a small spatula, the edges of which are rounded. You need to start working from the middle of the window. After you press the bead out a little, you will have a gap, thanks to which the element can be easily pulled out. You will be able to remove the glass unit.

If you have mounting suction cups, it is better to pull out the glass unit with their help.

The next stage of work

Dismantling of a metal-plastic window can begin after removing the double-glazed window. To do this you will need to knock down the plaster around it; if the window slopes are not plastered, but are made of removable material, they simply need to be unscrewed.

The window sill ebb is attached to self-tapping screws, so you need to unscrew them, and then you can tear off the ebb and the window sill itself.

How is the frame attached and how to dismantle it?

Knowing how much it costs to dismantle a plastic window, and this amount is approximately the same as installation, many owners remove the windows themselves. To dismantle the frame, you will need to study how it is secured. If the product is supported by anchor connections and plates, then they will need to be unscrewed or torn off without damage to the structure. The polyurethane foam needs to be removed: you can use a hacksaw for this. After all the fastening elements have been removed, the frame can be pryed with a crowbar (it is more convenient to do this in the middle of the lower part) and pulled out of the window opening.

WITH The cost of dismantling windows is not too high, but it is quite possible to save on the service by doing everything yourself. Carrying out the work yourself is not so difficult, given that it does not require complex tools or special skills.

Even seemingly “eternal” PVC windows require, if not repair, then regular maintenance – without fail. First of all, this applies to all mechanisms used in the design, so from time to time it is necessary to partially disassemble plastic window.

PVC windows different manufacturers have some differences - in the specifics of fastening elements, in the type of profile, and so on. But the general algorithm of actions is the same. At the same time, you need to understand to what extent to disassemble, since “throwing everything to the ground” simply does not make sense. Extra work will then add additional problems, since you still need to be able to not only assemble, but so that all the elements of the sash are securely connected and sealed.

With the procedure for “diagnostics” of windows, rules precise definition“sore spot” and eliminating the defect.

How to disassemble

Remove window

Naturally, you need to start with this. Considering the significant weight of the sash, it is better not to do this work alone. The element of its fixation is a metal rod, which just needs to be pulled out of the mounting socket. The plastic cover that covers it can be removed easily, without any tools.

Remove glazing beads

This is done only when, for example, the seal of the window unit is broken, and there is “blowing” from under the glass. In other cases, unless necessary, they should not be touched. Professionals do this - they start work by dismantling the longest glazing bead. To do this, use a tool with a wide and pointed blade (a spatula, a shoemaker's knife, a chisel or something similar).

Remove fittings

There is nothing complicated about this - with the help of a screwdriver all the screws can be easily unscrewed. The type of tool is selected depending on the type of slot on the fastener head. Some elements are also covered with plastic covers (for example, handle mounts). These parts are rotated at an angle of 90 0, thereby opening free access to the screws.

Removing mechanisms (locking)

This is usually done only to replace them. Lubrication can be done without this stage of work.

What to consider

  • Since disassembling PVC windows is done quite rarely, it is necessary to lay out all the removed parts in a certain order, so that later, during installation, they are not mixed up. And even better - sketch, write down, in general, do not rely on memory. According to the well-known law, it will definitely turn out that something needed for repair is at hand in this moment No. But even the next day, not everyone will remember in all details what and how he did yesterday.
  • It is not recommended to disassemble double-glazed windows. When assembling window blocks at the enterprise, necessary measures to ensure proper sound insulation of the sashes, for which special sealants and adhesives are used. Without knowing all the intricacies of the technology, it is unlikely that you will be able to carry out high-quality assembly on your own. In principle, such work does not make sense, since the “packages” cannot be repaired, and if a damaged product is replaced, why disassemble it?
Category: Windows

IN Lately plastic windows confidently occupy a leading position in the window construction market due to their strength, reliability, lightness and durability. But what to do when it is necessary to dismantle a plastic window that requires overhaul or replacements? Better Entrust the dismantling of plastic windows to professionals, because this is the most labor-intensive, in their opinion, stage in the repair or replacement work PVC double glazing. But you can do it yourself. This lesson will help you figure out how to properly dismantle a double-glazed window on your own, with step by step instructions at every stage.

Before you start dismantling plastic windows, you need to prepare the room for the upcoming work. No matter how carefully the plastic windows are dismantled, problems will still form. a large number of construction dust. Therefore, if possible, empty the room of household appliances and furniture, and cover the rest with plastic wrap.

Tools and accessories for dismantling

In order for the plastic window to remain intact during the dismantling process, it is necessary to prepare the following tools for work: a hacksaw, a hammer, a chisel, a spatula, pliers, a nail puller, a screwdriver, a hammer drill, a small crowbar and a set of screwdrivers.

Dismantling plastic windows: stages of work

The first thing to do is to free the window from the slopes. Start by clearing the seams of caulk and adhesive. Using a chisel, remove the decorative trim corners located at the junction of the slopes with the wall.

Then you need to remove the decorative trim from the top hinge of the window sash. Next, pressing the hinge axis from above with a screwdriver or pliers, you need to move it from the latch. After this, we completely pull out the axle using pliers.

We also remove the decorative trim from the bottom loop. After that, opening the sash with the handle, we swing it open, and lifting it up, remove it from the lower hinge.

It is convenient to dismantle the glass unit using a spatula. Insert the tool into the joint of the glazing bead, the strip securing the double-glazed window to the frame. Smoothly push the bead out of the groove. It is important not to overdo it with the pressing force of the spatula, so as not to damage the leg of the bead and the glass unit itself. Be careful when using a chisel, because... it can push through the bead and leave a mark on it, while a spatula with rounded edges will avoid this. Once all four beads have been removed, you can carefully remove the glass unit from the frame.

Now you need to remove the ebb and window sill. As a rule, the ebb on the window is secured with several self-tapping screws. After unscrewing them, remove it with a light tug. The process of removing the window sill is also not difficult, and depends more on the material from which it is made. PVC window sills are removed by hand by jerking upwards, because attached to the window by polyurethane foam. If it is long, jerks are made from the middle, gradually moving towards the edges.

Wooden window sills are cut in several places with a hacksaw and then removed by hand or using a crowbar. Concrete window sills can only be removed using a hammer drill or grinder. If these tools are not available, then the concrete window sill can be removed using ordinary brute force, using a crowbar or a hammer and chisel.

Dismantling a plastic window ends with removing the frame. To do this, using a hacksaw, you need to carefully cut through the mounting foam along the entire perimeter of the plastic window. If the frame was secured using anchor plates or concrete screws, you need to unscrew them or simply tear them out. After this, the frame is carefully removed from the opening, cleaned of mounting foam, and the fasteners are removed from it.

This completes the dismantling of plastic windows. To protect the dismantled windows during transportation, you need to remove the old anchor plates and the handle from the sash. Turn the cover, unscrew the mounting bolts and pull out the handle.

As you can see, in order to dismantle a plastic window it is not necessary to resort to the services of professionals. By following our recommendations at every stage, you can easily do it yourself. However, if you don’t have the desire or time, you can contact a specialized company, because the cost of dismantling plastic windows is low, and the order completion time is usually no more than two hours.

Dismantling plastic windows: video

  • - Gas silicate block- an excellent solution for a small building built with your own hands. One of the main advantages of the material is the lightness of the blocks with a fair size, which allows you to “kill”...

    • It is quite possible to repair glass panes with your own hands if you know their basic structure and the basic technology of their manufacture.

    It should be noted right away that many users call the entire window a double-glazed window, including glass, frame, and fittings, but this is not entirely true. Actually, a double-glazed window is a structure of two or more glasses, which are fastened along the contour using sealants and spacers. Install it yourself, without special tool and equipment is quite difficult, but it is no less important to correctly install the finished double-glazed window into an existing frame.

    However, knowing full well that when writing a search query about double-glazed window repair, many mean the whole window unit made of PVC and, accordingly, hope to get an answer to all questions, let’s expand the topic somewhat. Various components and mechanisms of PVC windows will be considered so that owners are aware of possible breakdowns that often occur during operation.

    Double-glazed window design

    The structure of a double-glazed window, in the correct understanding of this term, is somewhat reminiscent of the structure of an aquarium, only “packed” not from three, but from all four sides. A double-glazed window can consist of one, two or even three chambers, as it is designed for installation in different regions With individual characteristics climate.

    Chambers are the compartments between glass, respectively glass two, three or four can be installed.

    The glasses have a certain distance between them, which is determined by the distance metal-plastic or metal strip, which is glued on both sides with sealant.


    This distance rod can be different widths- the wider it is, the larger the air space between the glasses. This structural element is perforated with small holes - they are necessary to ensure that moisture does not collect inside the chambers and the glass does not fog up. The rail can be easily seen on already installed windows.


    Inside, the spacer rail is filled with a desiccant, which does not allow it, since it absorbs moisture well. The end part of the glass unit is filled with sealant - this layer is 10 ÷ 15 mm.

    Made in a professional way the glass block is filled with an inert gas, such as krypton or argon, or dried air with a certain vacuum. The gas filling has a higher density than air, so such windows have higher thermal and sound insulation characteristics.

    Glass is used to make double-glazed windows various thicknesses, - this must be indicated in the product labeling.


    So, for example, the designation 4- 10- 4 -10 -4 indicates that this is double-glazed window with glass thickness of 4 mm, and a distance between them of 10 mm. A more complex formula, for example 6- 10-4 — 16 A r—4 i speaks that we have a special double-glazed window with an external thickened glass of 6 mm, a first air chamber of 10 mm, a middle glass of 4 mm, a gas-filled chamber (argon) of 16 mm and glass with an energy-saving effect of type “i” 4 mm thick.

    Is it possible to assemble a double-glazed window yourself?

    This question often arises in cases where one of the glasses of the installed window unit has been broken. If you approach the assembly process with special care and accuracy, and have suitable material and tools for the job, then you can easily assemble a double-glazed window yourself, although this task cannot be called simple.

    To work, you need to have the following tools and devices on hand:

    — distance slats and linings;

    - rubber or plastic hammer;

    - wide chisel;

    - shoe knife;

    - a special plastic spatula;

    - glass suction cup;

    - glass cutter;

    — wooden ruler at 1.0 ÷ 1.5 meters.

    Removing double glazed windows

    Before making a new double-glazed window, you need to dismantle the old one with the broken glass.

    The glass unit is fixed in the middle of the frame using glazing beads, and in order to pull it out, they need to be dismantled. This is not difficult to do.

    • For this process, the tools you will need are a wide and sharp chisel. It is installed in the center of the vertical side of the glass unit, in the gap between the bead and the frame, and gently hit with a plastic or rubber hammer.
    • When the bead begins to move away from the frame at a distance of 5 ÷ 7 mm, it can then be detached by hand.

    • Then, the upper horizontal bead is dismantled - you can start tapping it from the corner.
    • Next, the second vertical and then the lower horizontal beads are removed.
    • To remove the glass unit from the frame, you need to wear thick gloves, as it may have sharp edges and there is a high probability of serious injury. If one of the glasses is broken, then the double-glazed window can be pulled out using a suction cup, installing it in the middle of the whole glass.

    • The suction cup is installed on the glass, fixed, and then using its handle you need to carefully pull the glass unit towards you and pull it out of the frame.

    Video: how to dismantle a double-glazed window from a PVC window

    Self-production of double-glazed windows


    To make a double-glazed window you will need following materials:

    - glass required thickness(at least 4 mm);

    - spacer or spacer;

    — primary sealant (butyl) and secondary (polysulfide, polyurethane);

    - loose desiccant.

    The manufacturing work consists of several stages. The first of these, of course, is preparing the venue.

    • For the convenience of the process, you will need a reliable, sufficient big table, with a perfectly flat surface, covered with dense soft material, for example, felt.
    • Next, the glass is measured. The measurement is taken from the old double-glazed window, and if this is not possible, then the inner edges of the frame are measured vertically and horizontally, minus 1 ÷ 2 mm on each side.

    One of the most crucial moments is precise glass cutting
    • The cut on the glass must be perfect, so you need to purchase a good one that can easily cope with this task.

    “Quick cutter” allows for precise and accurate cutting of large sheets of glass
    • If the glass required is large enough, then to fit it to right size It is best to use a roller quick cutter.
    • Having prepared everything necessary, the glass is placed on the table, the measurements are transferred to it and the quick cutter is installed. Its roller version is convenient because it allows you to make a perfectly even cut, since the stop will not allow the cutting element to slip.

    Roller “quick cutter” allows you to perfectly accurately maintain the size
    • It is recommended to carefully treat the edges of the cut glass with a stone with an abrasive surface (“diamond dust”), which will help protect your hands from damage.
    • When required glass will be cut and properly processed, it must be washed well, or even better, treated with glass cleaner. You should work especially carefully on the inner surfaces of the glass, as they will no longer be cleanable.
    • The next step is preparing the remote slats. You can try to use slats from an old double-glazed window, cutting them off the glass along with the sealant, but you will need to completely free them from the applied mass. If this cannot be done due to damage to one of the sides, then taking the dimensions is quite possible, and using them it is not difficult to make a new frame from perforated slats.

    The frame must be smaller size glass by 4-7 mm, that is, the glass should extend beyond its edges. This distance will subsequently be sealed with secondary sealant.


    • The internal cavities of the perforated spacer frames are filled three-quarters with a desiccant, which is most often used granulated silica gel.

    • To prevent the material from spilling out on the other side, a special corner is immediately installed into the cavity of the slats, which will become connecting element and will help bring you out of the vertical and horizontal slats perfect right angle.

    • After installing two separate slats, an angle of 90 degrees should be obtained.

    • Butyl is glued to the ends of the frame. protective tapefilm, which will be removed before attaching the glass to it.

    Butyl tape - self-adhesive
    • The glass is placed on a prepared, perfectly clean table, onto which the finished frame needs to be glued evenly. Here you can resort to a little trick - on the glass, using a ruler, using a corrector, make marks for the overlay of the frame, along its outer side - then it will be easy to erase these marks.

    • Before laying the frame on the glass, remove the adhesive tape from the bottom. protective film. The frame is installed strictly according to the marks and pressed lightly to obtain fixation.

    • It is recommended to make the same markings on the glass that will be glued on top of the frame, since unequal placement of the glass relative to the frame is unacceptable. The edges of the glass should extend beyond the edges of the frame identically.

    • The upper one is removed protective layer with sealing tape, the second glass is placed on the frame exactly according to the markings.
    • If you plan to make a two-chamber bag, then the gluing process is repeated.
    • When all the glass is assembled into a double-glazed unit, it is necessary to carefully crimp the glass to form a reliable adhesion to the butyl tape - this will be the primary sealing contour.
    • The next step is to fill the remaining cavity between the glasses along the entire perimeter of the glass unit with polyurethane, thiacol or polysulfide - thereby forming a second sealing contour.

    This process is carried out using a spatula or a construction syringe. The sealant should completely fill the cavity without any small air pockets or cracks.

    Drying of this contour usually lasts 8-14 hours, and after hardening it should look like rubber. Next, the smudges are cleaned up, and the quality of hardening and filling is checked.

    Installation of double-glazed windows


    • Now all that remains is to install the double-glazed window into the frame. To prevent the glass from coming into contact with the rigid material of the frame, fit into the groove in it. On the one side a rubber seal is installed around the entire perimeter.

    Sealing for double glazed windows - located around the entire perimeter of the frame
    • Next, rubber pads are placed on the vertical walls and on the horizontal base of the frame - they will soften the contact of the end sides of the glass with the plastic of the window profile.

    • Then, the finished double-glazed window is installed in the frame on pads, leveling it.

    • The exposed package must be pressed with glazing beads, having previously installed a rubber seal in them.
    • Hammer the bead into the groove using a rubber or plastic hammer, which will not damage the plastic surfaces.

    Video: the process of replacing double glazing in a PVC window

    Typical breakdowns of PVC windows and how to fix them

    Various breakdowns may occur during operation. installed fittings, which leads to difficulty in the functioning of its various components. Therefore, efforts have to be made to restore them normal operation. The most common malfunctions are:

    - sagging of the sashes;

    — violation of the pressing function of the sash;

    — replacement or repair of the handle;

    — replacement of the seal if normal sealing is disrupted;

    — opening the sash in two positions at once.

    The elimination of most of these deficiencies can rather be called adjustment measures rather than repairs, but how they are carried out is still worth knowing for everyone who has them installed. For this work, the tools you will need are a screwdriver, a screwdriver, and a 4 mm hex key.

    1. Adjustment according to verticals.

    To adjust the vertical position of the sash, lowering it or raising it, the first thing you need to do is remove the decorative plastic trim from the bottom hinge. Next, a hex key is installed in its upper adjustment groove and turned to the right if you need to raise the sash and to the left if you need to lower it. The key is turned gradually, and after each turn the sash must open and close in order to evaluate the result of the adjustment.

    2. Adjusting the lower angle of the sash according to horizontal.


    If one of the lower corners of the sash sags, the same lower canopy is used for adjustment, only the adjustment is carried out using the side adjusting screw. Turns are made to the right or left, depending on which corner needs to be aligned horizontally.

    3. Adjustment of the sash horizontally when it sags.


    If it is necessary to adjust the horizontal position of the sash when it is sagging, use the adjustment groove located in the upper part of the frame on the canopy side. The hex key is turned in the same way as the adjustments described above, with a mandatory intermediate check of each action - closing and opening the sash until it is tightened to normal.

    Adjusting the sash pressure when blowing, or when transferring from summer mode to winter and vice versa, is done by changing the position of the eccentric pivot pin.


    This element is located on the end side of the window, and the process of adjusting it is also carried out with a hexagon.


    The figure clearly shows the position and movement of the trunnions, in different options their execution.


    Weak or normal sash pressure is set to summer period, and strong pressure - for the cold season.

    5. Adjustment of the sash with a shift to the right or left.

    Adjustment "left - right" of the bottom of the sash is carried out in its open state, through the groove located with inside canopy Turning the key to the left moves the door to the right, and vice versa. The check is also carried out after each turn.

    6. It happens that when opening the sash, it is in the tilting and rotating position at the same time. This often happens if a frame with an opening in two positions is installed.


    A fairly common problem is the simultaneous opening of a window in two planes

    If this happens, you need to install the sash vertically and press top part frames to the canopy. Without closing it completely, you need to install the handle horizontally, as if it were turned in the open position of the sash.

    If the handle blocker installed at the end of the door prevents it from turning, you need to correct it with your finger. Next, you need to close the sash, as usual, by turning the handle down. Then, you just need to open and close the sash in different positions - it should fall into place and work normally.

    7. Handle jamming.

    If the sash handle is jammed in its open position, you need to disable the lock, which is installed to prevent the window from breaking, when reinstalling it in different positions, if the process happens too quickly. When the window is opened to the tilt position, the lock is activated and prevents the handle from turning.


    Blockers from different companies are different, but, basically, to deal with them, you don’t need to carry out complex operations. Usually it is enough to press this element against the seal or adjust it with your finger, and at the same time turn the handle.

    In other cases, the blocker, for various reasons, may slip past the response mechanism. In order to resolve the issue in this case, you need to find at the end of the sash the very mechanism that the blocker should have caught on to. Then they unscrew the screws on it and place a thin plastic lining under it. After this you need to check its operation. Usually such a gasket is enough for the clutch to work properly.

    8. Replacing the handle.

    Dismantling the old handle and installing a new one is carried out if this element is broken, loosened, or it needs to be replaced with another one, for example, with a built-in lock. Such an improvement is simply necessary if the apartment has Small child. And making a replacement is quite simple.


    To do this, you need to open the screws that secure the handle to the frame. They are hidden under a decorative plate located under the handle. Turning it, open two screws for a shaped screwdriver.

    By unscrewing them and pulling the handle towards you, it is easy to dismantle it. A new one is installed in its place, and you can fasten it with the same screws.


    Next, the decorative plate is rotated into place - and the work is completed. As can be seen from the description, the replacement process is very simple - it is quite accessible to anyone who knows how to use a screwdriver.

    9. Difficulty turning the handle.

    Difficulty turning the handle may occur due to various reasons, for example, misalignment or sagging of the sash. In addition, the cause may be old, caked-on lubricant in the turning mechanism.

    You need to start from the very beginning simple process- from the lubricant that needs to be applied to swivel mechanism and turn the handle in one direction or the other. It is applied from a bottle with a thin tube, so the composition will reach the farthest corners of the serviced unit. The product must be applied with end side frames

    If nothing has changed, you may need to adjust the sash, but first you need to determine which side needs to be adjusted. To do this, it is closed and determined by eye, and adjusted according to the above instructions.

    10. Replacing the seal.


    Another event that has to be carried out in cases where a draft appears. Often this becomes possible due to the fact that the seals are outdated, have lost their elasticity and have ceased to function normally.

    The seal lasts on average about 7 ÷ 10 years, but if it begins to dry out or cracks appear on the surface, then it’s time to replace it.

    First, you need to measure the length of the old seal to know how much you will need to purchase.

    When a new seal has already been purchased, the old one is removed from the grooves. The grooves must be thoroughly rinsed and dried. Then, the seal is inserted into them and pressed until it stops. It cannot be stretched or compressed - it must be in its natural state.

    11. Elimination of glass unit distortion.

    Another possible drawback is the misalignment of the insulating glass unit in the profile of the installed frame. How to fix this is clearly shown in the attached video.

    Video: how to eliminate distortion from an insulating glass unit in a PVC frame

    Prices for fittings for PVC windows

    Accessories for PVC windows

    All repair work, and even more so adjustment, can be carried out independently, saving a decent amount, but for this you need to have free time and opportunities. However, if you have absolutely no idea how to work with the tools and the materials mentioned, then it is better to entrust this process to craftsmen who have repeatedly encountered similar problems.

    Plastic windows have entered our lives so firmly and imperceptibly that we can no longer imagine how we ever managed without them. Lightweight, durable and reliable, plastic windows saved us from many of the hassles associated with annual painting and insulation. But sometimes even such universal windows require adjustment of individual elements and preventive repairs. In some individual cases, even partial or complete dismantling of the plastic window may be required. However, before disassembling and removing such a window, carefully consider your actions and decide to dismantle it only if absolutely necessary.

    Owners of houses and apartments that have new or almost new plastic windows installed may want to change them. The reasons for such a radical decision may be different: someone recommended the best manufacturer, you need to change the color, shape, size of the window.

    And here a reasonable question arises - how to dismantle a plastic window correctly? Few people know how complex and problematic the work of dismantling and replacing plastic windows is. It is better if the work on dismantling plastic windows is carried out by experienced specialists.

    Before dismantling the windows, it is necessary to first prepare the room: remove carpets, small furniture, household appliances and all valuables. You must provide easy access to windows. Bulky furniture should be covered with film.

    Even if the work is carried out by specialists, the appearance of construction dust and debris is inevitable. If you decide to dismantle the windows yourself, be prepared for long and very dusty work.

    Tool

    To disassemble plastic windows you will need:

    • chisel;
    • screwdriver;
    • sharp knife;
    • putty knife;
    • jigsaw or hacksaw for plastic;
    • screwdriver;
    • hammer;
    • gloves.

    Beginning of work

    Before you begin disassembling windows, you first need to remove the selected sash from the window opening.

    This must be done carefully and carefully, since the window structure weighs a lot, and the slightest careless movement can damage it.

    Pull out the rod that holds the sash from the top hinge, remove it and carefully lower it to the floor.

    First you need to remove the double-glazed window from the window sash, which is secured with rubber beads. The glazing beads should be removed sequentially, one at a time, starting with the longest one. To remove glazing beads you will need a wide chisel, a special spatula or a knife. The tool is carefully inserted into the narrow strip between the sash and the bead.

    When you remove the last bead, carefully remove the glass unit from the sash. Do this carefully so as not to drop it, since the glass unit weighs a lot. To avoid damaging your hands, first put on cotton construction gloves.

    The next step will be to disassemble and remove the window locking hardware. First unscrew the handles, then remove the screws. After this, disassemble the locking mechanism using a screwdriver, disconnecting the component parts. Collect all the parts of the disassembled structure in a bag so as not to lose it.

    We disassemble the double-glazed window

    Now proceed to the double-glazed window, which usually consists of two or three thick-walled glasses connected by a spacer frame. A moisture absorber is placed between the glass panes of the glass unit. Take a sharp knife and cut upper layer sealant.

    The knife should not be inserted deeply, otherwise you may damage the window.

    Remove the sealant layer by layer until you reach aluminum frame. It is better for you to carry out this stage of work with an assistant.

    Removing a window frame

    After removing the sashes and glass, you can begin dismantling the window frame. First, we dismantle the window partition; for this operation you will need a jigsaw. With its help we saw the partition of the frame. You can also use a plastic hacksaw for this purpose. After you have removed the partition from the frame, you can begin to dismantle the frame itself - this is the most difficult part of the work, since careless movement can damage the window opening.

    Using a jigsaw, we make cuts on the opposite corners of the frame, then using a screwdriver we remove the screws securing window frame. Then, using a crowbar and a hammer, you need to carefully remove the window frame in parts.

    This completes the dismantling of the plastic window.

    Results

    Now think again carefully about whether to entrust the dismantling of plastic windows to trained specialists or to do everything yourself. Professional workers will do all the work quickly and very carefully, maintaining the size of the window opening as much as possible. But if your financial capabilities do not give you such an opportunity, then by following these simple rules, it is quite possible to fulfill dismantling work on one's own.

    Video

    In this video, the master shows how to dismantle a plastic window.