How to make a camp shower with your own hands. Shower for a summer cottage, portable, heated

Sergey Olegovich, Chelyabinsk asks a question: Good afternoon. Please tell us how to make a camp shower with your own hands. I recently bought a plot of land without buildings, and now I’m developing it. A shower is necessary because after work you need to wash yourself properly. I would like it to be easy to assemble and take with me or hide in the shed when I build it. Thank you in advance for your advice. The expert replies:

Hello. Making a camp shower with your own hands is not difficult. There are several options for a portable wash design. The simplest of them consists of a plastic canister with a stopper, electrical tape, a piece of hose or corrugated pipe, and a coil of wire.

First you need to make a watering can. Cut off the bottom of the canister using a knife or scissors. A piece of hose needs to be attached to the neck of a plastic container and secured using electrical tape. A wire hook is attached to the bottom edge of the pipe so that it can be hooked onto the support of the watering can, otherwise all the water will pour out at once. You can do without a hose, then during washing you need to unscrew the lid a little and the water will flow out gradually.

We wrap the resulting watering can to a tree, pole or other support. The same coil of wire, electrical tape, adhesive tape, etc. will work as fasteners. If there is none, then attach it to a fence post if the height allows. If it is too low, then you will need to dig a support for the shower so that it is higher than you and other people who will wash.

The second version of a camp shower consists of a water container (basin, bucket, barrel, tank), a hose with a watering can, which can be bought at any plumbing store, a foot pump, and tape. We wrap the shower head together with the water flow to a tree or pole to the height you need. At the bottom we connect the hose to the pump. On its other side there is another pipe, the other end of which is lowered into a container of water.

For the system to work, you need to press the pump with your feet, then the water will rise to the top and pour out of the watering can. It turns out to be both a shower and an exercise machine. Such camp washing structures are sold in stores, but it is quite possible to assemble them yourself.

A curtain is not always used for a summer shower. If you need it, it attaches easily. Place 4 wooden or steel pegs next to the main support for the shower head and pull a regular bathroom curtain or any other fabric between them. To keep it in place, sew fabric ties to it from the inside and use them to tie the curtain to the pegs.

There is also a more extreme version of the camp shower. This way you can wash yourself not only in summer, but also in cold seasons, even at very low temperatures. For example, 15°C. It requires a plastic container with a stopper, a steel vat, large stones, tent canvas or polyethylene film. The canvas or film is stretched between several trees. For convenience, they can be pre-attached to wooden pegs so as not to have to look for appropriate place, and put the frame anywhere.

First we just choose a place, we don’t put the canvas. We light a fire, heat the boulders in it and heat the water in the vat. Then we mount the canvas frame. Above it we attach a plastic watering can with a cut bottom. After the stones have warmed up, we take them out of the fire and place them inside a kind of shower stall. As they cool down, they warm up the space around them very well. Next, pour warm water into a plastic container and carefully unscrew the lid to wash. Sometimes this design is not called a shower, but a camp bath.

In hiking conditions or in country house the presence of a shower is a pressing issue. Often, in order to wash in uncomfortable conditions, you need to find a large container (basin, bucket), then fill it with warm water, and then use a ladle or mug to begin the washing process. This method, although real, creates a lot of problems. Therefore, the best option for a dacha is a do-it-yourself stomp shower, a video about which you can see below.

The peculiarity of this shower is that it is compact, while the water flow is controlled by the foot. Also, the system does not provide for the presence of mechanical elements, which indicates its strength. In addition, even the youngest family members can operate this device without the help of elders, since it is absolutely safe.

Hygiene is just as important on the go as it is at home. Sometimes, in order to wash yourself at the dacha, you need to do a lot of inconvenient manipulations (find a container, heat the water, pour it on yourself, etc.), so you can’t dream of evenly distributing the water. But uncomfortable natural conditions can be made more comfortable thanks to a portable shower trampler.

The trample foot shower is easy to transport, making it convenient to use almost anywhere. It can be placed in a spacious backpack, and the corrugated cable can be easily twisted, thanks to which it folds compactly and does not deform at all. This device is the best option for hiking, as well as suburban areas that do not have the special benefits of civilization.

This type of shower can be easily used in the location of a standard country shower and even in a tent, as well as in a cabin or in an open space. The area of ​​operation of this water device is quite wide, since it not only performs its original functions, but can also be used to water flower beds and vegetable gardens in the country. Thanks to the length of the corrugated hose, it is simple and easy to draw water, for example, from a well or borehole, if there are any within the site.

A treadmill shower is also used to wash various objects and surfaces: cars, floor coverings, rugs, asphalt and even windows in the house. It is also convenient to use inside a home where there is no warm water. There will always be a job for this useful plumbing element; it will never gather dust somewhere on the outer shelves of the pantry.

How the device works

To understand the principle of operation of a trampler, you first need to understand the features of its structure. The design of the shower consists of several elements:

  • watering can (nozzle);
  • rubber mat or pedals;
  • corrugated hose that does not allow water to pass through;
  • valves;
  • water intake corrugated tube.

In principle, the corrugation is replaced with standard tubes, but then you should be prepared for the fact that they will need to be changed frequently, since such products often break at the bends during operation.

Portable shower-treadmill

Preparatory process for carrying out water activities using a shower-treadmill

  1. First, the hose, at the end of which the nozzle is attached, is hung on optimal height so that the watering can is above your head.
  2. Pedals or a mat are placed under your feet.
  3. One end of the tube is immersed in a container filled with hot water. Any solid container that holds a large amount of water can be used as a container: buckets, tank, canisters, large pans, etc.
  4. The person presses the mat with his foot, as a result of which warm water begins to flow from the container, entering the hose with a watering can.

The treadmill shower (see the video of its operation below) operates on a similar principle to a foot pump, which is why it has another name - a pneumatic shower.

The specificity of using this sanitary product is that, if desired, you can stop the water flow, while your hands are not busy, and this is very convenient for washing. Therefore, such a device is an excellent imitation of real shower equipment.

Advantages

  1. Basic operation of a shower structure. You just need to insert the tube into a container of water, and then take a couple of steps on the mat to start the system.
  2. Saving. The average price for a structure is approximately 1,500 rubles. Compared to a traditional shower in a suburban area, this will significantly save money and time resources.
  3. Mobility. The system is simply disassembled and assembled, making it easy to transport to any location.
  4. Versatility. As mentioned above, in addition to main function You can water the beds with trample, as well as wash large surfaces.
  5. Compactness. The parameters of the shower lie in its design features; the mechanism consists of a rubberized mat and two tubes.

Water pressure

The shower is a stomp, user reviews confirm this, it absolutely depends on the person. In other words, the formation of a smooth water flow is influenced by the frequency of steps. When the movements stop, the water will stop flowing.

Shower stomp in action

At first, this feature may seem very inconvenient, but as a result, water costs are significantly saved. Thanks to this mechanism, a person needs about 10 liters of water to fully take water procedures. In particular, this design even makes it possible to do a little aerobics while taking a shower, which contributes to good fitness and significantly improves mood.

Portable shower for the dacha “Toptun-mini”

If there is no connection to the pipeline at the place where the plumbing product is used, then Toptun-mini will come to the rescue. It is almost the same as a standard trampoline, but its difference is that the mini models do not have a rubber mat. In the standard version there are 2 cylinders on the mat, which must be constantly pressed to pump water, and in the mini version there is an autonomous cylinder made of medresin. However, such products function in the same way as a classic trampoline.

I would like to note that the cost of a mini shower is almost half that of a standard one. For example, a full-fledged model with a mat costs about 45 USD. e., and mini – about 25 cu. e. Economic factor plays a significant role in choosing a model, for these reasons, before purchasing, it is worth deciding whether it makes sense to pay double the price just for the presence of a rubber mat.

Shower stomp in action

Stomper - optimal solution for conditions where there is no running water, as it is an excellent alternative to a stationary shower. And the ease of use robust design and complete safety of operation makes it possible to use it even for children.

How to make a shower stomp with your own hands

This device is very simple, so you can make it yourself. The following items must be purchased:

  • Shower Heads; foot pump for cars;
  • a plastic tank with a lid;
  • rubber hoses;
  • wooden or rubber stopper;
  • metal or plastic tube.

Manufacturing stages

  1. The tank is filled with water and heated under the hot rays of the sun.
  2. Two holes are made in the cork various sizes(1 and 2 centimeters).
  3. Tubes are inserted into the holes made in the cork. Through larger hole(2 cm) tube should touch the bottom of the tank.
  4. Rubber hoses are placed over the tubes.
  5. The foot pump that supplies air to the container is mounted in a smaller tube.
  6. A shower head is attached to a large hose.
  7. You can also build a holder for a shower head and other amenities: a wall and a fence.

Area of ​​use of the foot shower

In addition to its main function, the device pumping water from the reservoir is used:

  • for watering trees, flower beds and beds;
  • for washing paths near the house, cars, windows and other objects;
  • for spraying plants (for example, seedlings).

A do-it-yourself trampoline shower (see assembly photo on the website) is not intended for use in an apartment if there is no hot water in it. It is better to leave such work to models (portable shower structure), which can be purchased in a special store.

However, using this device regularly is not always convenient. After all, it cannot be compared with a stationary shower with a tank and a comfortable cubicle, where there is room for bath items and towels. In addition, in bad weather conditions (rain), the water in the container will not heat up to the required temperature; for these reasons, it is better that the summer shower be equipped with an electric heating element. But as a temporary option, a shower stomp is quite appropriate. It can be assembled with your own hands or purchased assembled in a store that sells goods for fishing, recreation and gardening.

In conclusion, it is worth noting that the trampoline has a lot of possibilities, because it is convenient to use in any conditions and even in a room where there is no centralized water supply. Through this device, a warm, regular water flow is achieved, electricity is saved, and during water activities, a person engages in useful aerobics.

Portable shower-treadmill

Shower-treadmill for a summer residence

Shower stomp in action

Shower stomp in action

Treadmill shower design

Portable shower-treadmill for a summer residence

Using a portable shower

A modern resident of a metropolis does not consider it possible to give up the usual everyday amenities. When going to the country or just for a picnic, he does not want to sacrifice any comfortable conditions. Not to mention important hygiene procedures. But outside the city there is not always the opportunity to swim properly. The demand for devices for water procedures in mobile design is great. And if your dacha does not have an ordinary bathroom with all the necessary attributes, you can always take a portable shower with you for your dacha, thereby compensating for the lack of its stationary counterpart. What attracts buyers with this product:

  • Price. A portable shower for the country house and home is inexpensive. Behind minimum costs the owner of this device gets the opportunity to take a full swim.
  • Small size. You can take it on any trip without much difficulty; it won’t take up much space in the trunk of your car. And you can simply store it at the dacha by placing it on a shelf, putting it in a utility room, or in any free space.
  • Mobility. This was one of the main tasks during production. Make a portable camping shower that can be used with your own small in size and ease of use without being an unnecessary burden for the user.
  • Autonomy. Complete independence from surrounding circumstances is realized. No additional devices or devices are needed. You can install it whenever and wherever convenient. There is no need to use any tools.

Types of portable showers and their installation

Products differ from each other in price, performance characteristics and set of options. All of them are maximally adapted for easy installation and easy to operate. They can be divided according to the principle of operation and into two main types:

  • Products with natural heating. The simplest option. The container is filled with water and heated by the sun's rays. The housing provides design solutions for quick installation. A hook reminiscent of a regular hanger and a hole from which a portable shower can be hung. A tree branch or any structure made of wood, plastic or metal of sufficient height is suitable for this. The line of these products is presented in large quantities on the market. For example, the Camp Shower portable shower, which is a prominent representative of this type.
  • Products with forced heating. It is very practical and convenient to use them in the cool season or in cloudy weather, when it is not possible to heat ordinary portable summer showers. A necessary condition is access to household electrical network. By immersing the device in a container of water and turning it on, you can use it immediately. A very successful model of this class is the portable water heater for shower Fanline TJ-2000, which is fully capable of replacing the analogue that is familiar in urban conditions. When placing the device in a container of water to a depth of no more than 1 meter, you should remember that part of the liquid will be replaced (1.6 liters) by the device, so small tanks or buckets should not be filled to the brim.

The convenience and ease of use were highly appreciated by the owners of these devices. It can be used not only in the country, but also as a portable shower for a hike, where it can come in very handy. The lack of electricity forces us to abandon heated products, but there are very interesting models that are ideal for individual use in unsuitable places.

For example, a portable “treadmill” shower does not even need to be hung somewhere. The water supply will be provided by a pump built into a special mechanism. By moving from foot to foot, the user puts it into action. Two pistons create required pressure to feed it into the hose. By the way, this design is appreciated by car enthusiasts who happily use it to wash their cars. An ideal solution when there is no electricity or water. Fill the container with warm water and use the device where necessary.

Products without forced heating have a dark body to effectively absorb the thermal energy of the sun. If such a shower is filled with water and hung, then when sunny weather in a couple of hours it will be ready to use. If the container is placed on a hot surface (concrete, asphalt, metal), the time will be reduced. The standard capacity that comes with a portable shower is 20 liters, which is enough to use it for up to 10 minutes.

If you plan to travel by car, then it would be wise to purchase a portable heated shower powered by a car cigarette lighter. In this case, warm water will be guaranteed anywhere and at any time of the day.

A camping or recreation area on the site will be much more comfortable if you install a good portable shower for a heated cottage and equip it with a lightweight cabin made of synthetic fabric on a metal frame. As a rule, there is a place inside for fixing the hose. The throughput of this design is high, and it can serve many people. There will be no need to leave the recreation area. The Fanline portable shower, which is available in various power modifications, has excellent prospects for these purposes.

In addition to their intended purpose, some models of this type of product are also used for other purposes. For example, if you need to move liquid from one container to another. Or pump the water out of the basement. These tasks are easily handled by a portable shower pump for a summer residence, which processes up to 5500 liters per hour.

Home craftsmen often show ingenuity and use products own production. It's great when the owner is a jack of all trades. But it is strongly not recommended to make a portable shower water heater for your home or garden yourself. Use heating elements or other similar elements, operating from the network is dangerous to life and health. When designing and manufacturing original factory products, a large margin of reliability is built in. The connection diagram and design were tested for a long time on experimental samples, until the designers were convinced that a portable shower with a water heater for a summer cottage of this design could be put into production. In this case, inventing yourself means endangering not only your life, but also the health of your family and others.

Unfortunately, not all summer residents and those who like to travel comfortably know about all the benefits that a portable shower provides. Reviews from grateful users will open their eyes to new possibilities and inspire them to purchase this wonderful product.

bouw.ru

A camp shower will never be superfluous:: SYL.ru

Walks in nature, overnight hikes, tent camps or just an unfinished dacha... What unites these seemingly completely incompatible places? One small nuance that is difficult to refuse for a person accustomed to the benefits of civilization. Namely, in any, as they say, Spartan conditions, you cannot take water procedures. Simply put, you cannot take a shower in nature or in unfinished infrastructure. Sometimes this becomes a problem that does not allow you to relax properly and plunge into the atmosphere of real relaxation. Without getting ahead of ourselves, we can say: the problem is being solved! How? Another, no less interesting question.

Outdoor shower

Yes, whatever inventive people can come up with. A camping country shower is no exception. Why "dacha"? The fact is that often, looking behind gardeners’ fences, you can see a simple structure that is taken out and brought into the house every evening. That's why they called her the dacha girl. But the lack of goods on your favorite piece of land does not limit the possibilities of the above invention. Hiking, long walks, overnight stays - everywhere such a necessary thing as a camp shower can come in handy.

An easy choice

The needs do not go unnoticed, so the “smart” Chinese have learned to mass produce these designs. A camp shower can take any form, to suit any taste and preference. Need a closed type - please. The tent with a built-in tank is ready for use. All that's left is to fill in the water. Ten, fifteen and even twenty liters are at the disposal of the clean traveler. There are also lighter designs: a frame with cellophane curtains, at the top of which you can see a small barrel. A camp shower of this type has no disadvantages. Among the advantages you can consider lightness and low cost. All of these options are great for hiking and traveling, but the question arises: “Why buy?” It's no secret that the need for invention is cunning. You shouldn't pay money for something you can build yourself. For example, you can make a camp shower with your own hands. It will perform its functions just as well as its commercial “brother”.

How to make a camp shower with your own hands

There is no need to reinvent the wheel in this matter, everything has already been invented and tried a long time ago. There is only one task - to make a good camp shower with your own hands, which should have such properties as ease of construction, low cost (it is advisable that all materials for the construction are at hand) and relative comfort.

First building

How to make a camp shower when there is almost nothing around, only nature itself? It doesn’t matter, simple options will always find their use. Everything ingenious is elementary. The same can be said about shower designs. The first thing that comes to mind for such a thing is plastic bottles. Yes, there are no limits to imagination here. You don’t need a lot of material to build a camp shower from plastic bottles. The first and most important thing is capacity. The bigger it is, the better. After all, the water will flow longer, which means that the soul will be enough for a leisurely swim. Ten or five liters will be enough if used correctly and rationally. So, there is an eggplant. We need to start construction. This option will be the most comfortable, so you will have to work hard. The empty container should be placed slightly higher than your own height. Otherwise, when taking a shower you will have to bend down, which is not very pleasant. But here it is important not to overdo it, otherwise the procedure of filling the eggplant with water will take a lot of time and effort. You need to make a small hole in the “shower” container. Water will flow out of it. You need to insert a small hose into this hole; it will make taking a shower easier. There will be no need to wriggle in front of the stream. It is advisable to treat the joints well with resin or plasticine so that water does not leak out. I made my first camp shower with my own hands. Of course, you can add something of your own to it, it’s up to your imagination.

Second building

There is the most reliable and proven method, which everyone has probably used. This is a bucket. No, you shouldn’t pour it out in one gulp: there will be little effect. This design needs to be redone. A couple of steps - and the bucket will turn into a camp shower. For this design you will need a few tools and materials: a drill, a large and long bolt, sandpaper, a nail and a nut (of course, the same size as the bolt). So, you need to make a hole in the bucket with a drill. If you don’t have such a thin tool at hand, you can make a hole with a nail.
But it will not be neat, so the edges should be additionally sanded. All that's left to do is to thread the bolt into the hole and not fully tighten the nut. Thus, we got a large washbasin. When you lift the bolt, water flows; when you release it, water doesn’t flow. This is very convenient because the liquid does not run in vain, only when it is needed.

How to arrange a shower

Typically, a camp shower is built for a short period of time. A day or two - no more. Therefore, many are not too worried about the arrangement of the structure. But when it comes to constant use, you really need to count on convenience. For example, shower curtains. They will add home comfort. Curtains must be made of waterproof material. Film will work great. How to secure it? Around the tree, using branches, you can stretch a rope, and hang a curtain on it. You should thoroughly inspect the area near the shower. There should be no extra branches, needles, thorns, splinters or cigarette butts. Taking a bath next to garbage is not only unpleasant, it can be harmful to your health.

www.syl.ru

video instructions on how to make it yourself, features of heated products, water heater, pump, for hiking, price, photo

A portable heated shower will allow you to completely solve the problem of maintaining personal hygiene in a country area or on a camping trip. Such equipment has several implementation options. In this article we will look at the most popular ones.


Photo of mobile shower

Kinds

You always want to take a refreshing shower at the end of a long day, no matter where you are. But if at the dacha there may not be an equipped bathroom, then on a hike you certainly will not find this benefit of civilization. An excellent solution to this problem would be to use one of the types of portable equipment for the appropriate purpose.

Option number 1: camping shower bag

Portable camp shower in action

This is the simplest and most common type of mobile shower. It is a sealed container made of polyvinyl chloride, equipped with an elastic plastic tube with a valve and a watering can, as well as a screw-on lid.

Specifications:

A tourist portable shower has the following advantages:

  1. Easy to use DIY. All you need to do is hang the container on the included plastic pipe and fill with water.
  2. Mobility. After use, the tank collapses into a small package that can be easily transported.

Comparison of a liquid-filled shower with the packaging it comes in

  1. High heating rate of the poured water, which is 2-3 hours. This is greatly facilitated by the black color of the material from which the container is made.

Advice: if you plan to use the device in question in a suburban area where there is electricity, you can purchase a portable shower equipped with a special water heater. Then the availability of warm water will not depend on weather conditions.

  1. Multifunctionality. Excellent not only for performing hygiene procedures, but also, for example, for washing a car or washing dishes.
  2. Acceptable price. The simplicity of the device guarantees its low cost.

As you can see, the portable backpacking shower bag is easy to assemble for a DIY camping trip and is easy to use.

Option number 2: portable shower “Step”


Portable “treadmill” for taking water procedures

“Toptun” is a very interesting device that is very similar to a pump.

It has the following structure:

Stepa design diagram

Technical specifications:

Such features provide this equipment with the following advantages:

  1. Simple instructions for one person operation. There is no need to hang the water container to a great height; it can stand on the ground. It is enough to immerse the receiving tube in the water and stand on a special foot platform, which, in fact, is a pump. Working with your feet, you will pump out water and transport it to the watering can, which can either be held in your hand or fixed in a place convenient for you.

Application of "Toptun"

  1. Durability and practicality. There is simply nothing to break in it.
  2. Mobility. When folded, the Step takes up little space and also weighs little. You can take it with you on a hike or use it at the dacha. It is noteworthy that after you leave your suburban area, you can either hide the device in a locked utility unit, or take it with you, so it will not become a victim of thieves.
  3. Wide range of applications. In addition to at the dacha and on a hike, “Toptun” can also be useful in an apartment during a period when the hot water is turned off. You can heat the liquid in a saucepan, place the device in the bathtub, feed the hose into the saucepan, and give yourself a full-fledged shower using this method.

Tip: when using “Step” in the bath, place a mat under it. This will prevent damage to the enamel.

Option No. 3: folding cabin

Portable shower cabin with changing room

This is not quite a full-fledged shower, but still this design is worth mentioning separately. It is a folding frame with stretched waterproof fabric. In this case, the problem of comfort and privacy is solved.

But the actual watering process will have to be thought through separately, although you can easily use it in combination with the first two options, which together will provide you with a full-fledged bathroom away from home with all the amenities.

You also simply have the right to install such a structure in your dacha and equip it with a plastic flat tank for a dacha shower. At the end of the season, fold it up and hide it from prying eyes. The main feature is that you do not need to build a capital cabin, which requires serious labor and financial costs.

Conclusion

You need a shower both on a hike and in the country. To implement it, you will only need one of the options for the simple devices listed above, in the assortment available on the shelves of specialized stores. They are simple and mobile to use.


Adoption of water procedures in field conditions

The video in this article will introduce you to additional materials, directly related to the topic discussed. A portable shower-water heater will easily solve personal hygiene problems anywhere.

hydroguru.com

Is it a camp shower? It's simple!

Do you like to be outdoors? Can't imagine life without hiking native land? Are you building a summer house while you have nowhere to wash? Or maybe you just love extreme sports? You'll have to learn how to build a camp shower with your own hands. You can make it from almost any available containers. Washing in warm water in a warm room is not only pleasant: in cold weather, your health can depend on such a shower. Even novice nature explorers can build a camp shower.

We build a watering can

The simplest shower works like this. A curtain is attached to the tree (if you want to wash alone). A hole is made in the cap of a large plastic bottle into which a piece of hose is inserted. The cap itself is taped to the bottle with electrical tape (if there is a hose). If it is not there, then for water to flow, just unscrew the lid. For a large container, any thin hose is suitable, for a “one and a half” - a tube from a dropper. It must be securely secured in the hole in the lid. To prevent water from flowing spontaneously, you can clamp the hose with a stopper or use a wire hook to attach the end at the top. Next - cut out the bottom of the bottle, close the lid, and attach it to a high branch. For convenience, you can place the bottle in a net or simply attach it to a branch with wire. The simplest camp shower is ready. Instead of a plastic bottle, you can use an Esmarch mug, a heating pad, etc. This device is quite suitable for summer time. But what to do if you are on a hike, around a mountain and -20°C, and you really want to wash? Actually, it is the next structure that will be what is called a “real camp shower.” Naturally, it can be done anywhere, but they say it was the climbers who came up with this method of hygiene.

We build a portable camp shower

Actually, only the curtain and the water container will be portable. We assemble all the other parts right at the rest stop. We will need:

  • Devices for lighting a fire.
  • The boulders are the size of a three-year-old boy's head, but a bucket of regular pebbles or other stones can also be used.
  • Curtain.
  • Plastic bottle with stopper and hose.
  • A tent or film stretched over a frame. The frame can be carried with you, or it can be built between trees.

In order to build a warm camp shower, we light a fire, put stones in it, and heat water over the fire. While everything is warming up, we assemble something like a wigwam from cellophane (if there is no empty tent). You can use branches, etc.
We make a fastening above the wigwam: here we will hang a plastic bottle (see the device above) with water. When the stones warm up, carefully place them around the perimeter of the “wigwam”. This is the most dangerous part of the procedure: you can get burned. Boulders or pebbles must be cooled in the teepee so that you can stand on them. As they cool, they heat up the air very much. Then hang a bottle of hot water and... light steam! Usually the stones allow 4-5 tourists to take a shower, and only after that the “room” begins to cool down. If you do everything quickly and take more boulders, then even a group of 15 people will have time to complete the required bath procedures.

fb.ru

Plumber's textbook Useful articles about plumbing, ventilation, water connection and drainage

Do-it-yourself shower: camping, country options and designs in

When the conversation turns to making a structure such as a shower, in most cases craftsmen imagine a booth with a tray connected to a water supply, or on which a water container is installed. But, in case finished products If you can’t find it, you have to use any available material or products with a different purpose. Based on this, the question of how to build a shower with your own hands using the maximum number of elements required for this is also fascinating to skilled experts.

Hiking options

When going on vacation to nature, a person tries to provide for himself on the spot great comfort. At the same time, you don’t need to carry a large number of things with you, and when loading the car, there are a lot of necessary elements that you need to take with you. Based on this, a typical tourist shower should occupy minimal space, be lightweight, or be made from existing items with a different purpose.

Store designs

Of all existing models systems for similar purposes, it is necessary to emphasize only one. It has the form of a simple tight bag, to which is attached a small valve with a detachable watering can and a hatch with a lid for filling. Along with this, it is worth emphasizing that the price of such a design is low, and it takes up minimal space, practically weighing nothing.


This product is filled with water and hung on a tree. After this, opening the valve, they begin to use it as a simple shower. It is worth emphasizing that the operating instructions also allow the use of warm water, but any specific model has its own permissions.

Considering the features of this design, it can be classified as a marching one. Along with this, you can create a semblance of this device yourself, using a tarpaulin or film.

Advice! A similar system can also be used for transporting and storing drinking water. Based on this, the need for it on hikes is obvious.

Homemade products

Most tourists make a basic shower from a canister with their own hands, without damaging the product. It is enough to bring an additional cover with you, in which holes are made in advance. It is put on after filling with water and used as a watering can.

In addition, it is possible to use large plastic bottles or other similar containers. But if there is a strong need, the easiest way is to use a kettle, put a watering can on the spout and hang it on a tree. You can build such a shower in nature with your own hands in a couple of minutes..

Advice! There are quite a few ways to organize the supply of water from a height, but spraying a stream is only possible from a watering can. Based on this, it is worth taking it with you.

Country houses

When creating a shower on the site with your own hands, you have to deal with a number of troubles, which need to be solved taking into account the terrain and the expected level of required comfort. Based on this, the manufacturing process should be divided into stages.


Pallet

  • The easiest way is to make a cushion with crushed stone and sand, on top of which they install wooden pallet. This is how, in most cases, they make a shower in the village with their own hands, assuming that the drain will go straight into the ground.
  • In addition, the method of making a cement base is quite common. You can fill it yourself or use it for this purpose. finished slab. Along with this, it is mandatory to make a bias towards the intended drainage system. To simplify the work, some craftsmen use stones that are compacted into the ground.
  • If you make a shower with your own hands, then you can use any available materials. The main thing is that they can be easily walked on, in addition to the presence of water, and there is the possibility of organizing drainage.

Advice! The drainage of water must be done in such a way that the liquid goes into the ground, and not under the foundation of the building.

Tank

  • While you are making a shower in the yard with your own hands, you should immediately think about what kind of container should be used for water. This is especially important if it is not possible to buy a regular tank.
  • It’s worth emphasizing right away that barrels that previously contained chemicals or petroleum products are not suitable for these purposes. They may contain sediment, which will later dissolve in water and can lead to poisoning of the body.
  • In addition, open containers should not be used. Sick birds or their waste products can get into them.
  • The easiest way to make a shower from a Eurocube with your own hands is because this container is excellent in all respects and, at the same time, has sufficient quantity. But you need to take into account the enormous weight and use strong supports during installation.
  • The tank for similar purposes is selected very carefully, because it is the basis of the entire structure and will depend on it appearance frame.

Advice! Installing a faucet with a watering can on a container is quite simple, but do not forget that it is best to use a screw or needle locking mechanism. These systems allow you to precisely regulate the pressure force, which significantly increases the level of comfort.


Fencing

Some craftsmen prefer to create the simplest ceilings using a simple film. But, if you make a solar collector for a shower with your own hands, then it is assumed that the structure will be located in the open air and light will penetrate through it. This leads to a certain discomfort for some people, because the internal space will be visible.

Given this feature, experts advise using profile pages or moisture-resistant plywood. In addition, dry reeds are suitable for these purposes, which are tied together, creating a complete overlap.

Advice! Sometimes dilapidated building materials are excellent for such a task. But they need to be put in order and exposed protective treatment. Simple paint may be suitable for this.

Constructions in the apartment

Sometimes such situations arise when you need to install a shower in your apartment, but at the same time there is no way to install a shower cabin. Then it is possible to use intentionally created structures or non-standard technical solutions.


Bath

The easiest way to install a shower in an apartment with your own hands is if it is placed in the bathroom. It is possible to use the bowl itself as a pallet, but at the same time, in places where it comes into contact with the wall, it is necessary to seal all joints using sealant. In addition, it is assumed that the installed mixer will have a shower head, which will be able to be fixed on the wall.

Then you should buy a special fence or curtain that will protect the room from splashes. At the same time, it can completely cover the entire perimeter or only the bathtub, which is located a meter from the mixer.

Advice! Such solutions are quite simple, because they have been used in the distant past and some companies are developing a lot of products for them. But when choosing them, you need to be careful so that all the elements are perfectly combined with each other into a single system.


Toilet

In addition, in our time there are still apartments that do not have a room like a bathroom. In addition, they are seen as an environment at a time when people are buying a dorm room and want to take personal amenities while saving space. Based on this, in such cases, a shower room in the apartment is made with your own hands, but it is connected to the toilet.

First of all, in similar situations, you need to drain. Along with this in sewer pipe they cut a branch, which is walled into the floor screed with waterproofing, making something like a storm drain at an angle. It goes without saying that the level of the threshold and floor will rise very much, but this is a necessity that cannot be avoided.

Then simply install a mixer with a shower head on the wall. In such a room it is possible to take water procedures normally. Along with this, a closed toilet seat will serve as an unusual chair, which is quite convenient for some people.

Advice! Such a solution can be called extreme, but in certain technical conditions it is the only one. But if it is possible to use just the cabin, then it is worth using it.


Conclusion

After reviewing the video in this article, it is possible to study these designs and the principle of their manufacture in more detail. In addition, taking the text above as a basis, it is worth concluding that, in fact, in arbitrary conditions, human ingenuity allows you to create designs that can significantly expand the level of comfort.

Along with this, making a shower with their own hands from scrap materials, the craftsmen take into account all the wishes of future users. This gives rise to the most extraordinary designs with fantastic design and technical highlights.

uchebniksantehnika.ru

DIY device and methods

This device for taking water procedures appeared in our country relatively recently and immediately attracted the attention of users.


Do-it-yourself shower-treadmill

What are the advantages of a trample shower over conventional devices?

Characteristics Brief description

Small size and weight

The total weight of the shower-treadmill does not exceed 2-3 kg, the dimensions, depending on the model, are no more than 30x40 cm. Such linear indicators allow you to constantly transport the device with you and use it at the right time.

Mobility

There is no need to build special rooms for a shower-treadmill. The watering can can be held in your hands, hung on a tree, attached to a wall, etc. If necessary, the location of the shower can always be changed. If desired, the shower can be connected to a large barrel of water and used permanently.

Versatility of use

The device can be used not only for water procedures, but also for watering garden beds, washing a car and other household needs.

Reliability

The trample shower does not have complex parts, which allows you to significantly increase its service life. In addition, it does not require periodic maintenance or repairs. If there are risks of contamination, then a simple strainer can be installed on the inlet pipe.

Ease of use

The pump pumps water without electricity; it can be installed in the countryside and connected to a large container of water - the shower time is significantly increased. The stomp shower has proven itself well at picnics by the pond, and you can take it with you on hikes.

How to use a shower stomp


Shower trampler: scope of application

Before considering options for making your own shower-treadmill, you should find out the operating principle of the device; such knowledge will help you choose the most suitable one. good option taking into account plumbing experience, financial capabilities and desired technical characteristics.

The design and principle of operation of the shower-treadmill

The treadmill shower consists of the following elements.


Before you start making your own shower-treadmill, you need to find out the technical characteristics of factory devices and what they depend on. This knowledge will make it possible to plan what indicators can be adjusted during production, how to do this and to what positive or negative consequences they will bring it.

Technical characteristics of the shower-treadmill

Maximum water suction depth

It depends on the elasticity of the housing; the stiffer the housing material, the greater the vacuum it can create during an increase in the internal volume. But the suction depth cannot be significantly increased. Why? The fact is that when you press the pump housing, you will have to overcome not only the pressure to supply water to a certain height, but also the resistance of the housing.

Let's consider the features of the pump. For example, a person weighs 70 kg. If the housing creates a vacuum of adequate 15 kN to suck in water, then to create water pressure it will be possible to apply a force of no more than 55 kN (70 kN - 15 kN). This means that the greater the suction depth, the lower the lift height with the same pressing force on the pump. For example, we took the weight of an adult.


The summer shower is very easy and convenient to use

What if a child uses the trampoline shower? In connection with this inverse relationship suction and pressure parameters, the designers found an acceptable middle option. Factory device can lift water no more than 50 cm, and the supply pressure depends on the effort applied. Such parameters allow people with light weight to use the trampoline shower; the washing process does not require much physical effort.

Maximum water supply height

The greater the compression force on the pump housing, the higher the water pressure is created. Indicators are limited only by a person’s weight. And of course, the physical strength of the case material.


It is worth considering that the pressure depends on the effort applied

Performance

Depends on two parameters: the internal volume of the pump and the frequency of pressure. The first parameter is set by the manufacturer; average values ​​are selected. If the pump has a very large volume, then to press the chamber a person does not need to “tread water”, but raise his legs high. This is inconvenient; the designers did not take this route to increase water supply productivity.


In the photo there is a factory shower-treadmill

The average parameters of the pump are selected in such a way that the volume of water squeezed out from one pump is continuous until the second pump is turned on. But this does not mean that the frequency of pressure can be increased indefinitely. The fact is that the process of filling the pump takes time; you can press on the pump body only after its entire volume is filled with water. Overall dimensions also depend on performance.


Factory shower-treadmill for a summer residence

Factory models are made of durable rubber, the intake and exhaust valves are installed on special rigid elements. Find tires in the store that suit your needs. physical characteristics almost impossible. In addition to strength, it needs to be hermetically fixed to the sidewalls, the length and diameter must be coordinated, and stability and durability must be ensured. In connection with such problems, we offer other options for making a shower-treadmill yourself.

Having this knowledge, you can start making your own shower-treadmill. We will consider two device options, both have their advantages and disadvantages.

Pneumatic shower-treadmill

In terms of its operating principle, it bears little resemblance to the factory version, but in terms of comfort it is not only in no way inferior to it, but also superior in many respects. The device we offer pumps not water, but air, although the operating principle of the pumps is the same.


Shower diagram

What are the main differences?

  1. If a conventional shower-treadmill takes water from the tank and supplies it to the shower head, then excess pressure is created in a sealed container with water using a foot pump, which pushes the water into the shower head.
  2. The pump does not pump water, but air.
  3. Water pressure can fluctuate within significant limits.

Step-by-step manufacturing instructions

We give only a basic manufacturing diagram; anyone can make minor changes to it, taking into account the available materials. The water from the shower will flow under pressure, the air is pumped by a car pump or frog pumps for inflation rubber boats.

Step 1. Choose a suitable water container. This could be a plastic twenty-liter bottled water container, a metal or plastic barrel, a milk can, a canister, etc.

Practical advice. If you plan to make your shower mobile, then you don’t need to look for a large capacity. Practice shows that twenty liters is enough to wash one person. In addition, you cannot pump hundreds of liters of water with your feet; this requires a lot of time and physical effort.

We recommend using plastic canisters to make a shower. They have sealed lids, handles for transportation and a capacity of up to 50 liters. Another advantage of this container is that the large wall thickness allows it to withstand significant pressure without problems.


Plastic cans


Plastic water barrels

Step 2. Attach the inlet and outlet pipes to the cover. Air will be pumped through one pipe by a pump, the other is used to supply water to the shower head.

For example, consider installing pipes on the lid of a plastic canister or barrel. The diameter of the nozzles is within 10 mm; select specific values ​​taking into account the diameter of the pump hoses and available parts.


Important. If you hold the lid with your hands, be very careful. Remember that the drill can tear out the cover; be especially careful when drilling after a hole has appeared on the back side. through hole. Side faces cutting tool grab the plastic and with great effort start to rotate it. It is at this moment that the lid most often breaks in and injures the master.


Step 3. Insert the pipe into the hole, there should be a metric thread on both ends. Put on the rubber gaskets (you can do it on one side), install metal washers on top and tighten the connection with nuts.


Elements for fixing pipes

Practical advice. We strongly do not recommend fixing the pipes using only sealant or glue. While using the unit and pumping air, dynamic forces of alternating directions act on the pipes. Over time, the adhesive or sealant will peel off, causing the joint to fail. If the air outlet is small, then you can still use the shower, but you will have to pump the pump more often and faster. If the gaps are significant, then you will have to deal repair work.


Fitting with washers

Step 4. Attach a long hose to one pipe; it will supply water to the watering can. A short hose for air supply is attached to the second one. To make dressing easier plastic hose heat its end in boiling water and in this state put it on the plastic. After cooling, reduce the diameter of the hose; the connection is quite reliable. Moreover, there will be no high pressure in the hose. If in doubt, additionally secure the end with a small clamp of a suitable diameter. To increase the tightness of the connection, you can tightly wrap several turns of electrical tape around the pipe.


You can wrap electrical tape or fum

Step 5. If necessary, attach special adapters to the nozzles to connect the pump hose and shower head. Connect them also after heating the end of the hose.


Connection fixed to the lid

How to use this shower?

Pour water into a container and place it in the sun to warm up. If you don’t have time, you can immediately dilute cold water with warm water.

Important. Always leave about a third of the volume of the container for air. Due to this, it will be possible to create a sufficient pressure reserve for a complete outflow of water. Use a foot pump to pump up the air; there is no need to pump up a lot of air. Pressure of one atmosphere lifts water to a height of 10 meters. For your information, bicycle tires have a pressure of only 0.5 atm.

The pump can not be turned off; it has a built-in check valve, eliminating pressure drop. Practice shows that a pressure of approximately one atmosphere can guarantee the pouring of 15 liters of water from a twenty-liter container when it is filled with water to two-thirds of its volume. You can take a shower right away or wait a bit until it warms up to a comfortable temperature.


How does a pneumatic shower work?

What are the advantages of the proposed design? There are quite a few of them and they all significantly increase the comfort of using a portable shower.

  1. There is no need to constantly trample on your soul. For elderly and sick people this is a tiring task.
  2. The water is turned on/off as needed. There is an opportunity to wash yourself in peace.
  3. Small children can use the unit. They either turn on the watering can themselves, or wash themselves with the help of their parents.

Such advantages make this shower design quite popular among numerous owners of summer cottages. The shower can be installed not only outside the city, but also taken with you on a picnic, fishing or on land plot for agricultural work.

This shower can be installed permanently

If you install a check valve on the inlet pipe, such a device will be very useful when treating plants with chemical pest and disease control agents. A check valve can be purchased at any hardware store. Availability check valve makes it possible to disconnect the pump after pumping air and carry the container in your hand. There is no need to buy expensive models with automatic pressure control. An ordinary rubber valve in a normally open state is sufficient. The valve is held in this position by a spring. When the air stream moves in the opposite direction, the air presses the rubber gasket against the socket and closes its exit from the nozzle.


Check valve device


One of the modifications of the summer shower

Video - Foot stomp shower “Rain”

Video - Shower from a plastic bottle and pump

Stomp shower made from two frog pumps

You can try to make another version of the shower-treadmill. For these purposes, use so-called “frogs” as pumps. These pumps are used to inflate rubber boats. There are two types of devices in the implementation.


Two such pumps are connected into a single structure using a tee and plastic tubes. You need to connect two inputs and two outputs. The inlet hose is lowered into a container of water, the outlet hose is connected to the shower head.


We lower the hose into a container of water (the photo shows an example of a factory shower; a similar design can be made from two pumps, hoses and a watering can)


We stand on the mat and wash ourselves


Water pressure can be adjusted


You can attach the watering can to a pole

Video - Treadmill shower at work

The design is ready for use, but it has significant shortcomings.


We looked at two options for making portable shower units yourself, but there is also a third, in our opinion, the most successful. According to reviews from many owners of industrial shower-treadmills, they use such devices no more than two or three times. And then they remember the old, simple, cheap and universal method. They buy an ordinary ladle and pour water from the bucket on themselves.

Video – Shower stomp

vanna-expert.ru

video instructions for choosing with your own hands, features of camping tourist products with a toilet, price, photo

When going on an outing to the countryside or on a hike, it is advisable to provide a way to maintain personal hygiene, especially if the event is long. Today we will deal with a simple portable device in the form of a tent, which can be both a shower stall and a room for performing natural needs. Alas, even in the forest it is not always possible to find a secluded place, not to mention open space.

It should be admitted that in traveling conditions you can get dirty much faster than in ordinary life. Therefore, a moment will inevitably come when you have to wash off the dirt, and in some cases just cool down. A simple design that can easily turn into a “hidden toilet” will help with this. You can make a shower tent yourself or purchase a ready-made one.

Shower tent for camping conditions

What are they offering us?

Shower design

Where can you most often see such devices?

Of course, in stores selling camping equipment.

  1. One of the most popular is the Seattle Sports camp shower, which is offered in three models that differ in the volume of the water tank.
  2. Want to use warm water? No problem. Pour the liquid into a container and leave it in the open sun for several hours. Of course, it’s unlikely that you’ll be able to splash around to your heart’s content, but the 20L model, according to the instructions, is capable of supplying water continuously for 8 minutes.

Tourist tent for toilet or shower

Advice: if you have big company, you can buy a tourist shower for 40 liters.

  1. If you are planning a trip by car, you can use a special car shower made of hard plastic. The design feature is the use of a heating element, which can be connected to a cigarette lighter or to a 220 V network using an adapter.
  2. A good option that eliminates the constant running with buckets to the shower from the source on summer cottage, use of an electric water pump.

Cabin

So, we have figured out how to take a shower, now it remains to talk about where, or rather, what it can be done in. This is especially true for rather shy people.

Manufacturers thought about it and offered a folding version of the cabin, which looks like a tent. Structurally, they are so simple that with some persistence you can make them yourself, after which you can take a shower even in a field or a crowded campsite.

Shower or toilet tent with windows

However, there are other ways to use such structures that allow you to hide you from prying eyes. We are talking about a latrine, which must also correspond to the cultural experience of our civilization. Observe certain rules follows not only in urban, but also in hiking conditions, in order to remain constantly human in any place and in any situation.

Some cannot imagine how they will correct natural needs simply in the forest among the bushes and trees. Although there are many who consider this method quite suitable. They practically do not care that someone may accidentally be nearby.

For others, we recommend thinking in advance about a tent for a composting toilet or an appropriate bucket toilet. These simple and inexpensive devices will allow you to remain a representative of a civilized society even in the most remote wilds.


Folding tent with toilet and camp shower

Design

The main philosophy of such a hiking accessory should be lightness, ease of assembly and comfort of use. Externally, it is an ordinary tourist tent, which allows you to take a shower or go to the toilet during the transition.

There are 3 options:

In the photo - a portable dry toilet with a tent

Advice: buy a model with windows, then the “room” will not be dark.

Manufacturers also took care of the color preferences of customers. There are options for “hidden” colors - green, dark beige, khaki or protective, or you can choose a bright palette. (See also the article Camping washbasin: features.)

Making a shower yourself

A couple of tips on how to bring yourself closer to civilization even when traveling:

  1. You will need a regular plastic bag and a PET bottle cap with holes. Cut off the corner of the bag and secure the stopper in it with tape. Hang the structure from a tree or attach it to a pole.

Tip: instead of a cork, you can simply make a hole in the bag.

Hanging shower tent

  1. You can replace the bag with a durable canvas bag, which is often used by the military for various purposes. The neck of a garden watering can is used as a shower. The structure is then suspended and a tent or fence is placed around it. Now the shower stall is ready.

Conclusion

Although there are those who claim that “hygiene is the enemy of tourists,” it is better to take care of it in advance. Moreover, today this can be done for little money or using improvised means. A shower or toilet tent is always useful if you often like to go hiking. The video in this article will give you the opportunity to find additional information on the above topic.

This device for taking water procedures appeared in our country relatively recently and immediately attracted the attention of users.

What are the advantages of a trample shower over conventional devices?

CharacteristicsShort description
The total weight of the shower-treadmill does not exceed 2-3 kg, the dimensions, depending on the model, are no more than 30x40 cm. Such linear indicators allow you to constantly transport the device with you and use it at the right time.
There is no need to build special rooms for a shower-treadmill. The watering can can be held in your hands, hung on a tree, attached to a wall, etc. If necessary, the location of the shower can always be changed. If desired, the shower can be connected to a large barrel of water and used permanently.
The device can be used not only for water procedures, but also for watering garden beds, washing a car and other household needs.
The trample shower does not have complex parts, which allows you to significantly increase its service life. In addition, it does not require periodic maintenance or repairs. If there are risks of contamination, then a simple strainer can be installed on the inlet pipe.
The pump pumps water without electricity; it can be installed in the countryside and connected to a large container of water - the shower time is significantly increased. The stomp shower has proven itself well at picnics by the pond, and you can take it with you on hikes.

Before considering options for making your own shower-treadmill, you should find out the operating principle of the device; such knowledge will help you choose the most successful option, taking into account plumbing experience, financial capabilities and desired technical characteristics.

The treadmill shower consists of the following elements.


Before you start making your own shower-treadmill, you need to find out the technical characteristics of factory devices and what they depend on. This knowledge will make it possible to plan what indicators can be adjusted during production, how to do it and what positive or negative consequences they will lead to.

Technical characteristics of the shower-treadmill

Maximum water suction depth

It depends on the elasticity of the housing; the stiffer the housing material, the greater the vacuum it can create during an increase in the internal volume. But the suction depth cannot be significantly increased. Why? The fact is that when you press the pump housing, you will have to overcome not only the pressure to supply water to a certain height, but also the resistance of the housing.

Let's consider the features of the pump. For example, a person weighs 70 kg. If the housing creates a vacuum of adequate 15 kN to suck in water, then to create water pressure it will be possible to apply a force of no more than 55 kN (70 kN - 15 kN). This means that the greater the suction depth, the lower the lift height with the same pressing force on the pump. For example, we took the weight of an adult.

What if a child uses the trampoline shower? Due to this inverse relationship between suction and pressure parameters, the designers found an acceptable middle option. The factory device can lift water no more than 50 cm, and the supply pressure depends on the effort applied. Such parameters allow people with light weight to use the trampoline shower; the washing process does not require much physical effort.

Maximum water supply height

The greater the compression force on the pump housing, the higher the water pressure is created. Indicators are limited only by a person’s weight. And of course, the physical strength of the case material.

Performance

Depends on two parameters: the internal volume of the pump and the frequency of pressure. The first parameter is set by the manufacturer; average values ​​are selected. If the pump has a very large volume, then to press the chamber a person does not need to “tread water”, but raise his legs high. This is inconvenient; the designers did not take this route to increase water supply productivity.

The average parameters of the pump are selected in such a way that the volume of water squeezed out from one pump is continuous until the second pump is turned on. But this does not mean that the frequency of pressure can be increased indefinitely. The fact is that the process of filling the pump takes time; you can press on the pump body only after its entire volume is filled with water. Overall dimensions also depend on performance.

Factory models are made of durable rubber, the intake and exhaust valves are installed on special rigid elements. It is almost impossible to find tires in the store that match the physical characteristics. In addition to strength, it needs to be hermetically fixed to the sidewalls, the length and diameter must be coordinated, and stability and durability must be ensured. In connection with such problems, we offer other options for making a shower-treadmill yourself.

Having this knowledge, you can start making your own shower-treadmill. We will consider two device options, both have their advantages and disadvantages.

Pneumatic shower-treadmill

In terms of its operating principle, it bears little resemblance to the factory version, but in terms of comfort it is not only in no way inferior to it, but also superior in many respects. The device we offer pumps not water, but air, although the operating principle of the pumps is the same.

What are the main differences?

  1. If a conventional shower-treadmill takes water from the tank and supplies it to the shower head, then excess pressure is created in a sealed container with water using a foot pump, which pushes the water into the shower head.
  2. The pump does not pump water, but air.
  3. Water pressure can fluctuate within significant limits.

Step-by-step manufacturing instructions

We give only a basic manufacturing diagram; anyone can make minor changes to it, taking into account the available materials. The water from the shower will flow under pressure, the air will be pumped by a car pump or frog pumps for inflating rubber boats.

Step 1. Choose a suitable container for water. This could be a plastic twenty-liter bottled water container, a metal or plastic barrel, a milk can, a canister, etc.

Practical advice. If you plan to make your shower mobile, then you don’t need to look for a large capacity. Practice shows that twenty liters is enough to wash one person. In addition, you cannot pump hundreds of liters of water with your feet; this requires a lot of time and physical effort.

We recommend using plastic canisters to make a shower. They have sealed lids, handles for transportation and a capacity of up to 50 liters. Another advantage of this container is that the large wall thickness allows it to withstand significant pressure without problems.

Step 2. Secure the inlet and outlet pipes to the cover. Air will be pumped through one pipe by a pump, the other is used to supply water to the shower head.

For example, consider installation of pipes on the lid of a plastic canister or barrel. The diameter of the nozzles is within 10 mm; select specific values ​​taking into account the diameter of the pump hoses and available parts.


Important. If you hold the lid with your hands, be very careful. Remember that the drill can tear out the cover; be especially careful when drilling after a through hole has appeared on the back side. The side edges of the cutting tool grab the plastic and begin to rotate it with great force. It is at this moment that the lid most often breaks in and injures the master.


Step 3. Insert a pipe into the hole; there should be a metric thread on both ends. Put on the rubber gaskets (you can do it on one side), install metal washers on top and tighten the connection with nuts.

Practical advice. We strongly do not recommend fixing the pipes using only sealant or glue. While using the unit and pumping air, dynamic forces of alternating directions act on the pipes. Over time, the adhesive or sealant will peel off, causing the joint to fail. If the air outlet is small, then you can still use the shower, but you will have to pump the pump more often and faster. If the gaps are significant, then you will have to do repair work.

Step 4. Attach a long hose to one pipe; it will supply water to the watering can. A short hose for air supply is attached to the second one. To make it easier to put on a plastic hose, heat its end in boiling water and in this state put it on the plastic. After cooling, reduce the diameter of the hose; the connection is quite reliable. Moreover, there will be no high pressure in the hose. If in doubt, additionally secure the end with a small clamp of a suitable diameter. To increase the tightness of the connection, you can tightly wrap several turns of electrical tape around the pipe.

Step 5. If necessary, attach special adapters to the nozzles to connect the pump hose and shower head. Connect them also after heating the end of the hose.

How to use this shower?

Pour water into a container and place it in the sun to warm up. If you don’t have time, you can immediately dilute cold water with warm water.

Important. Always leave about a third of the volume of the container for air. Due to this, it will be possible to create a sufficient pressure reserve for a complete outflow of water. Use a foot pump to pump up the air; there is no need to pump up a lot of air. Pressure of one atmosphere lifts water to a height of 10 meters. For your information, bicycle tires have a pressure of only 0.5 atm.

The pump can not be turned off; it has a built-in check valve, eliminating pressure drop. Practice shows that a pressure of approximately one atmosphere can guarantee the pouring of 15 liters of water from a twenty-liter container when it is filled with water to two-thirds of its volume. You can take a shower right away or wait a bit until it warms up to a comfortable temperature.

What are the advantages of the proposed design? There are quite a few of them and they all significantly increase the comfort of using a portable shower.

  1. There is no need to constantly trample on your soul. For elderly and sick people this is a tiring task.
  2. The water is turned on/off as needed. There is an opportunity to wash yourself in peace.
  3. Small children can use the unit. They either turn on the watering can themselves, or wash themselves with the help of their parents.

Such advantages make this shower design quite popular among numerous owners of summer cottages. The shower can be installed not only outside the city, but also taken with you on a picnic, fishing or to a plot of land for agricultural work.

If you install a check valve on the inlet pipe, such a device will be very useful when treating plants with chemical pest and disease control agents. A check valve can be purchased at any hardware store. The presence of a check valve makes it possible to disconnect the pump after pumping air and carry the container in your hand. There is no need to buy expensive models with automatic pressure control. An ordinary rubber valve in a normally open state is sufficient. The valve is held in this position by a spring. When the air stream moves in the opposite direction, the air presses the rubber gasket against the socket and closes its exit from the nozzle.

Video - Foot shower “Rain”

Video - Shower from a plastic bottle and pump

Stomp shower made from two frog pumps

You can try to make another version of the shower-treadmill. For these purposes, use so-called “frogs” as pumps. These pumps are used to inflate rubber boats. There are two types of devices in the implementation.

  1. Rubber. The body is molded from hard rubber, which, when restored to its original shape after pressing with the foot, pumps air through the inlet valve. When you press the body, the inlet valve closes, the outlet valve opens under pressure, and pressure is supplied to the hose. Pump volume is approximately 1.5 liters.
  2. Plastic(type Bravo 7011). Consist of upper and lower plastic panels, which are connected to each other by especially durable rubberized fabric. The working volume of such pumps can be three or more liters.

    The devices also have inlet and outlet valves, and the principle of air injection has been changed. A metal spring is installed between two plastic plates; it is this spring that compresses/decompresses depending on the applied forces; the top plastic cover approaches the bottom or moves away from it. Due to such movements, the internal volume of the pumps changes.

    Such pumps have the ability to increase the rate of water intake. To do this, you must first remove the rubberized casing; it is fixed to the upper and lower parts with ordinary clamps. Please note that some clamps may be disposable. During tightening, their hooks are deformed; when compressed again, they either slide off or become wedged. Before disassembling such pumps, just in case, buy new clamps. After removing the housing, access to the internal spring is available. It needs to be removed and replaced with a stiffer one, just be sure to install a spring made of stainless alloy steel. We warn you that you must respect the golden mean. A very stiff spring will significantly speed up the suction of water by the pump, but at the same time the force required to compress the device will significantly increase.

Two such pumps are connected into a single structure using a tee and plastic tubes. You need to connect two inputs and two outputs. The inlet hose is lowered into a container of water, the outlet hose is connected to the shower head.

The design is ready for use, but it has significant drawbacks.

  1. Pumps cannot lift water from long distances. This will slow down the water supply process; washing under a weak stream is very inconvenient. It is advisable to raise water containers; the height difference is recommended to be at least a meter. In this position, water will enter the pump housing much faster. It is often technologically impossible to increase the inlet opening of pumps; in this way it will not be possible to speed up the water supply.
  2. To mount two pumps, you need to use a special rigid stand, and it cannot be made of wood. And when attaching pumps to other materials, significant difficulties arise. Solving problems will require a lot of time and effort; factory pumps do not have technological holes designed to fix them in a stationary position. We will have to come up with special elements and do it in such a way that the functionality of the devices is not impaired. At the same time, the pumps must sit firmly in place and not move while supplying water.
  3. Manufacturing requires a lot of time and significant material resources. In terms of cost, a ready-made trample shower is quite competitive with a self-made one, and in terms of comfort it is much superior. Is it worth wasting time, money and effort to end up with a device with worse technical characteristics and increased cost compared to ready-made factory analogues?
  4. ABOUT A common disadvantage of all types of trample showers is that they need to be installed on hard surfaces. It may be specially made wooden stand, paving slabs, etc. Otherwise, within a few minutes there will be dirt under your feet, and grass lawn will turn into a swamp.

We looked at two options for making portable shower units yourself, but there is also a third, in our opinion, the most successful. According to reviews from many owners of industrial shower-treadmills, they use such devices no more than two or three times. And then they remember the old, simple, cheap and universal method. They buy an ordinary ladle and pour water from the bucket on themselves.

Video – Shower stomp

20885 0 0

Camping toilet and shower: urban comfort in the field

Greetings, comrades. Recreation in nature is known to be beneficial - 2-3 hours per fresh air won't bother anyone. But longer events, such as a multi-day hike, will require participants to provide an effective way to maintain personal hygiene. After all, even in the forest it is not always possible to find a secluded place for these purposes, not to mention a tourist camp in an open space.

And today we will look at what a camping version of a toilet can be, and we will get acquainted with its multifunctional portable analogues in the form of a tent, which can be either a room for performing natural needs or a shower stall.

Personal hygiene

Of course, you can argue that you can do without a shower for 1-2 days on a tourist trip, but experienced tourists will object to you and give their reasons:

  1. You can get dirty much faster on a hike than at home;
  2. Dirty skin will not allow your body to fully recover overnight;
  3. The lunch shower is invigorating, which is important during long treks;
  4. In extreme heat, you just need to cool down.

The situation is the same with the toilet:

  1. Every time it is unsafe to move far from the camp to relieve natural needs, especially at night;
  2. It is unhygienic to adapt bushes directly near the roosting site;
  3. In open areas, the problem of arranging a secluded place only intensifies.

Captain Obvious informs: you can add protection from adverse weather conditions to the list of reasons for the need to take a camping bathroom with you. Agree, rain dripping down the collar and soggy ground under your feet is unlikely to please anyone.

Constructive tandem

As you know, the apartment has separate showers and toilets. On a hike, where every kilogram of weight matters, the most preferable would be a combined design - a camping shower-toilet.

What it is?

  • Waterproof fabric tent with dimensions 100x100x250 cm;
  • Container for water made of rubberized fabric with shower head and hose;
  • Holding devices toilet paper(inside) and coat hooks (outside).

With a shower, everything is more or less clear: hang up a tank bag filled with water, go inside and you can wash. What about the toilet?

Most of the time, the tent is used precisely as a toilet - a latrine is equipped inside it.

What it should be is up to you to decide. It could be:

  1. Peat dry toilet;
  2. Folding toilet seat;
  3. Tourist cardboard toilet box.

Alternative

Experienced tourists can tell you many ways to arrange a latrine during a stopover. Instead of using a portable toilet, you can dig a hole and place a tent on top. For such cases, there are folding seats, but their design provides for securing bags, which is much simpler and more convenient than arranging a pit.

Captain Obvious informs: if you do not want to combine a shower with a toilet, then you can arrange a tandem, for example, install 2 tents together. They should not be separated from each other - water for washing hands after visiting the toilet can be taken from the shower.

How to choose the right one

It is clear that it is best to buy travel equipment in specialized stores. But before you go shopping, you should determine the acceptable parameters for yourself:

  1. If you are going to travel by car, then you have practically no weight restrictions. If the trunk allows it and you like comfort, feel free to take a full-fledged dry closet and a tent. If there is little space in the car, choose folding options;

A tent is necessary not only to create privacy, but also to protect from rain, wind and scorching sun. You can’t refuse it, if only because it weighs 1.5 kg and can be installed in a couple of minutes.

  1. For traveling on motorcycles or bicycles, only folding options are suitable. Why? Lack of roomy trunk;
  2. For hiking, you need models with minimal weight and dimensions.

Let's take a closer look at which toilet models you can purchase for travel.

For autotourists

For campers, stores selling camping equipment offer the following models of camping toilets and showers.

As I said, when traveling long distances, the most important thing is to have a full toilet available. First of all, this is:

  1. Dry toilets;
  2. Bucket toilet;
  3. Folding seats with waste container.

I won’t talk in detail about dry closets - such information is available in other articles on our website. I will focus on highly specialized models intended exclusively for travel.

My verdict: the simplest model, the idea for which is borrowed from the classic chamber pot. All you have to do is remove the lid with your own hands, secure the waste bag and you can use it.

My verdict: combining a latrine with a stool, in my opinion, is controversial. If we consider the model solely as a toilet, then overall it’s not bad. One of the advantages is the possibility of using ordinary plastic bags.

As for the shower, everything is simple:

  1. The tent should have a hole for the hose to enter and a loop for attaching the shower head;
  2. Choose the color of the water bag black - it heats up the water faster;
  3. For a company of 3-4 people, 40 liter bags are preferable.

The instructions for the toilet tent contain information about the maximum possible load. If the weight of the rubberized water bag exceeds the permissible value, set up the tent near a tree from which you can hang it.

For motorcycle and bicycle tourists

My verdict: it is clear that you have to pay for compactness, but, in my opinion, the price is too high.

My verdict: the model is interesting due to its compact size and the presence of a lid. Its appearance is more classic, maintenance is the simplest.

Another interesting model for transportation is a toilet-suitcase from an American manufacturer. When assembled, it doesn’t look much like a bathroom.

My verdict: an original solution. The cost is justified by its versatility.

For hiking

Tourists who go hiking on their own prefer secluded places to relax, going deep into the wilderness. Accordingly, they choose tents of “hidden” colors.

Regardless of the model of folding toilet you choose, you need to address issues with odors while camping. Locating a bathroom at a great distance from the camp is not an option, so it is more logical to use special kits for the disposal of human waste.

What is included in such a kit?

  1. Double recycling bag made of durable material:
    • The outer bag is used to transport waste;
    • The internal one contains a filler - a disposal agent that absorbs odors;
  1. A set of toilet paper – 4 meters;
  2. Hand sanitizer in a plastic bag.

Captain Obvious informs: the cost of such a solution is 1,400 rubles per pack of 12 bags. As for me, for such a complete set – quite reasonable money.

For construction lovers

A couple of tips on how you can bring yourself closer to civilization even in camping conditions:

  1. Take durable and opaque polyethylene film on your hike;
  2. Make a rectangular one from the branches and cover it with film;
  3. For wind resistance, hang it from a tree;
  4. Secure the lower part with stakes;
  5. Install a folding toilet inside or hang a rubberized bag with a watering can and use it.