What is the best lubricant to use for ear grinders? What is the best way to lubricate the gearbox?

The question of how to lubricate the gearbox on an angle grinder is sooner or later asked by all owners of this widespread product in everyday life and in professional activity tool. Almost every experienced master has his own personal, time-tested opinion on this matter. Some regularly use lithol and solidolm, others buy lubricant for CV joints in car stores, and others resort to the services of specialized services. It should be said right away that these approaches are not equivalent, since not all of them provide optimal uninterrupted operation devices.

What is the importance of lubrication?

In order for an angle grinder to fully perform its functions and not cause any problems, its maintenance must be approached with great responsibility. The quality of the lubricant determines the effective operation of the angle grinder under heavy loads, the duration of successful use of the equipment and environmental safety.

Before deciding which lubricant to lubricate the angle grinder gearbox it is necessary to understand that this element is one of the main parts of the angle grinder. During the operation of the equipment, it becomes very hot, so heat removal plays a huge role. To some extent, this is facilitated by the fact that its casing is made of metal, but great importance It also has proper lubrication. If a master has bought a high-quality, highly reliable tool, such as a Makita, he is simply obliged to monitor it and pay due attention to it. Otherwise, the equipment will not be able to demonstrate its full potential and will not last the entire period for which it is designed.

What kind of lubricant is best to use in practice?

According to the vast majority of experts, the necessary lubricant for an angle grinder must correspond to the manufacturer of the device used. That yes, if the equipment is produced under a certain brand, then the lubricant must be chosen the same. This option is optimal, since the development similar materials are carried out by specialists who take into account all the features of a particular device. In order for the unit to operate with maximum efficiency and sufficient for a long time It is better to use original lubricants. This approach will save the owner of an angle grinder from a lot of unnecessary problems related to the maintenance of the tool and its use.

If for some reason the technician does not have the opportunity to use optimally suitable lubricants, then the second preferred option would be CV joint lubricant. It also allows you to achieve good results and is used by many on an ongoing basis. Finding it on sale is quite easy.

The worst way to keep the gearbox in in good condition is the use of solid oil and lithol. It’s worth saying right away that many people do not disdain these materials, but you shouldn’t count on full-fledged operation of the tool. Even if the difference is not visible for short periods, after a while the technician will most likely encounter problems.

If, nevertheless, the user chose the most The best way To take care of your angle grinder, you should decide which original lubricant is used to lubricate Makita angle grinder gearboxes? Or if a device from another manufacturer is used, then in accordance with it. This will create the most favorable conditions for long-term and high-quality operation of equipment and in order to solve relevant problems with the best possible results.

How to service an angle grinder under warranty?

If the grinder has not yet reached its warranty period, then there are no problems with its lubrication at all. Regardless of which manufacturer produced the tool, the work described is best entrusted to the appropriate workshops.

For example, what materials are used to lubricate gearboxes? grinding machines Makita?

Specialists, as a rule, know this much better than ordinary users and can do everything with the maximum efficiency that is possible in each specific case. In addition to the fact that high-quality materials are used, professionals have the most correct idea of ​​what dosage to use, which also significantly affects the final result. At home, even the most suitable lubricants can be applied incorrectly and thus cause some damage to the instrument.

An important point is also that lubricant that is inappropriate for the technique greatly violates the rules for using an angle grinder. In the future, this may well become the reason why the services refuse to service the grinder. The services of workshops can also be used when operating devices that are no longer under warranty. This is a pretty good approach that allows you to keep your equipment in good working order. better condition. Most craftsmen, as a rule, do not do this, since they are used to lubricating the gearbox themselves and believe that there is no point in wasting time visiting services.

In conclusion, it is worth saying that It is strictly forbidden to leave angle grinders without lubrication at all.. At first, this will lead to some problems with the operation of the angle grinder, and then the gearbox will simply fail. Changing it is quite difficult and in many cases it would be preferable to purchase a new unit. Some inexperienced and irresponsible users have already seen this in practice, but after purchasing a new tool they radically changed their attitude towards timely maintenance.

As you can see, lubrication of the gearbox when operating an angle grinder is a fundamentally important issue that cannot be neglected. Only timely and correct solution This task allows you to maintain equipment in full working condition.

Effective operation, safety and long-term use of any equipment depend on high-quality and timely care. Parts that are subject to the greatest load require the most careful attention to themselves - such as, for example, an angle grinder gearbox.

During the use of the tool, the structure is subject to friction and, accordingly, overheats. Poor-quality lubricant can, having lost the required consistency, “leak” from the mechanism, which will entail additional stress, mechanical and temperature. It is also extremely difficult to control the volume of such a product.

The lubricant needs to be changed if:

  • “clumps”, dry and dried particles are found on the inner walls of the body;
  • the gears of the gearbox are not coated with lubricant in the required quantity;
  • a year has passed since the last replacement (with frequent use of equipment);
  • gearbox parts and rotor bearings are replaced.

Requirements for lubricating fluids for angle grinder gearboxes

The master decides for himself how to lubricate the grinder gearbox. There is no universal remedy - you need to select your own liquid for a specific tool. A properly selected lubricant must meet a number of requirements, including:

  • be resistant to corrosion;
  • consist of natural components - including in order not to harm the master when inhaling vapors;
  • reduce the friction force of gears, and, accordingly, the heating temperature of the tool;
  • the consistency should be thick enough to stick to the parts, but with a viscosity not higher than 800 Pa s;
  • the consistency must remain stable and not change, “melt” or flow out of the mechanism when the temperature rises - minimum temperature drop point +120ºС;
  • ensure the operation of the tool in the range of up to +150 ºС;
  • The presence of metal impurities in the composition is not allowed;
  • tensile strength of at least 120 Pa;
  • be hydrophobic, have water-repellent properties;
  • protect the “insides” from dirt and dust.

Review of lubricants for grinders

If you lubricate a working tool with lithol or grease, saving on materials, there is a high probability that, ultimately, the equipment will refuse to work properly, no matter how high quality it is.

Some resources claim that preparing a liquid that satisfies all of the above points will not be difficult even at home. In one case, it is recommended to use lubricant for SDC in combination with MS-20 oil, in another case it is proposed to use a mixture of substances Tsiatim-221 and TAD-17. Despite numerous positive reviews, in both cases the consequences can be unpredictable - the manufacturer hardly took into account the possibility of refilling the gearbox technical means not reassigned compositions for it.

Foreign companies recommend to craftsmen how to lubricate the grinder, offering specially developed ointments. The manufacturer strongly recommends the use of exactly the products specified in the operating instructions. On Russian market they really exist, but at a fairly high price. In this regard, the question of high-quality lubricants from domestic manufacturers arises:

  • if the original imported lubricant contained molybdenum, you should look for an analogue labeled “MoS2”;
  • “NLGI2” - for industrial tools and others operating on liquids of the second viscosity class (penetration - 265-295);
  • "ISOL-XBCHB 2" for ISO standard;
  • "DIN 51825-KPF 2 K-20" for DIN standards.

Among Russian lubricants, materials from the Interskol company stand out, long time engaged in the production and maintenance of power tools. Such lubricants, “tailored” to the specific features of the equipment, not only ensure first-class operation of the gearbox and meet many of the stated requirements, but are also pleasantly priced. Thus, a tube of lubricant will cost the buyer no more than 100 rubles, while the same lithiol costs only half as much. Whether it makes sense to save money in this case, or is it easier to pay a little more but get a quality product - it’s up to each master to decide.

Lubrication technology

First of all, it is necessary to completely remove the used lubricating fluid - usually, due to the presence of dust and dirt impurities, it darkens and becomes cloudy. Next, you should carefully check the tool parts for traces of lubricant, and the body cavities for foreign inclusions, including particles of broken parts. For more effective cleaning When using an angle grinder, it is recommended to use liquids used to clean the engine and its parts. Kerosene and gasoline are suitable for this purpose.

New lubricant is added before it flows out. reverse side- usually visually it occupies slightly less than half the volume of the gearbox. Masters believe that this is the only way to control whether the material is sufficiently filled.

If there is too much lubricant, it will not only find a place to “climb out” during work at the most inopportune moment, but will also “interfere” with the tool. Power will decrease, and energy costs, on the contrary, will increase. However, as a last resort, you can always open the case and remove excess substance.

The situation is much more unpleasant when insufficient quantities lubricants In this case, there is a high probability of poor-quality operation of the gearbox and the tool as a whole. A characteristic “bad” noise is detected, indicating high voltage on the tool and gear friction.

Now you know what you can use to lubricate the gearbox of an angle grinder. Approach the choice of material for your instrument with all responsibility and care. In return, the equipment will repay you with long, uninterrupted service, and even expensive original lubricant will definitely pay for itself.

It is no secret to anyone that in construction industry Among the most popular tools are grinders (or angle grinders - angle grinders). You need to cut various materials(tiles, stone, sheets of metal), and perhaps grind the cuts? In this case an indispensable assistant an angle grinder will be at work.

The correct choice of lubricant for an angle grinder gearbox is the key to excellent tool performance.

The gearbox is one of the most important elements Angle grinder. It converts the higher angular velocity occurring on the input shaft into output shaft speed, thereby increasing the torque. The efficiency of the power tool, which generally determines the performance of its work, largely depends on the successful operation of the gearbox. It is known that in order to increase the efficiency of a tool, it is necessary to reduce the friction between its individual parts and ensure heat removal (the angle grinder gets very hot during operation). The functions of reducing friction and removing excess heat are performed by the lubricating fluid, which is why the question regarding which lubricant to lubricate the angle grinder gearbox is of interest to both professionals and home craftsmen.

Note that any Lubrication only reduces friction and does not eliminate it completely, therefore, when the mechanism operates, the smallest particles of parts still end up in the oil. Over time metal dust accumulates in the lubricant, which as a result loses its viscosity and can no longer perform its function as effectively. Thus, the viscosity of a lubricant is the main indicator that should be paid attention to when purchasing it. No less important point– frequency and timeliness of lubricant replacement.

Most manufacturers of angle grinders in technical documentation, in addition to all the parameters of the device, the type of lubricant recommended for use is indicated. Bulgarians famous manufacturers As a rule, branded lubricants are required. Otherwise, if a tool breaks down, its owner cannot count on free warranty repair. When the warranty period expires, experts recommend continuing to use branded lubricants, but many in this case switch to Russian analogues, which are cheaper.

In general, the requirements for lubrication of power tools are very strict:

  • it must ensure the normal functioning of the tool even under very high loads and temperature changes;
  • during the entire period of operation it must maintain a good lubricating effect;
  • it must fully meet environmental safety requirements.

So, how to lubricate the gearbox on an angle grinder?

Experts advise using formulations that have the consistency of liquid oil. They are poured into angle grinders in a strictly defined quantity. During operation, the lubricant is evenly distributed among the parts and components. The most famous manufacturers of gear oils include companies Bosch, Lubcon, Hammer, Makita and Hitachi.

Plastic compounds are also used to lubricate gearboxes, but do not forget that not all models of angle grinders are able to function stably with products having a similar consistency.

Experts do not recommend using lithol and solid oil to lubricate the gearbox, although they are not capable of seriously harming the tool. Those who still use these products need to remember that the period of “effective operation” of lithol is much shorter than that of branded lubricants, therefore it should be changed more often.

When deciding on choosing the optimal lubricant for an angle grinder, pay close attention to products based on silicone or silicone oil. They are suitable for angle grinders operating under various loads over a fairly wide speed range. What distinguishes them is high level resistance to oxidation and corrosion, and they are also quite easily combined with elastomers and plastics. Due to the presence of only lithium thickener and silicone in the composition, such lubricants are environmentally friendly.

Many people ask the question: what original lubricant is used to lubricate Makita angle grinder gearboxes? Of course, most experts agree that the best option is the choice of “native” lubricant (for example, Makita 181490-7). However, if someone thinks that the necessary lubricant for a Makita angle grinder is exclusively the product of this famous corporation from the Land of the Rising Sun, he is not entirely right, since high-quality oils from other well-known companies may also be suitable, but only if they have similar characteristics.


We worked and work here Moscow region Moscow region Tver region Kaluga region Vladimir region Tula region Abramovka Abramtsevo Avdeevo Avdotino Avsyunino Abramtsevo Akatevo Alabino Alabushevo Aleksandrovo Aleksino Alpatyevo Alferyevo Andreevka Astapovo Ateptsevo Afanasovka Ashitkovo Ashukino Babenki Baksheevo Barabanovo Baranovskoye Barvikha Barvikha Sanatorium Barybino Barynino Bezzubovo Bekasovo Beloozersky Beloomut White Wells White Pillars White Rast Belyanaya Gora Berezka Rest House Bereznyaki Biorki Birevo Biserovo Bobkovo Bogatishchevo Bolychevo Bolshie Vyazemy Bolshoi Dvori Bolshoye Alekseevskoye Bolshoye Gridino Bolshoye Gryzlovo Borisovo Borovkovo Borodino Bortnikovo Botovo Boyarkino Bratovshchina Bronnitsy Budenovets Buzhaninovo Buzharovo Bunkovo ​​Bunyatino Burtsevo Vaskino Veliky Dvor Velyaminovo Verbilki Veselevo Vishnyakovskie Dachas Leader of the Proletariat Volkovo Volokolam sk Volchenki Vorobyovo Voronovo Voskresensk Vostryakovo Vysokovsk Vyshegorod Ganusovo Gar-Pokrovskoye Hydroelectric complex Village Glubokoe Golitsino Golovkovo Gorbovo Factory Goretovo Gorki-Kolomenskie Gorlovka Settlement Gorshkovo Grishino Gubino Davydkovo Davydovo Darishchi Dashkovka Courtyards Dedenevo Dedinovo Demikhovo Denezhnikovo Denkovo ​​Dmitrov Dmitrovo Domodedovo Donino Dorokhovo Drezna Dubki Dubnevo Dubrovitsy Durykino Dukhanino Dyutkovo Evsee in Elgozino Elizarovo Eldigino Ernovo Ershovo Efremovskaya Larks Zhitnevo Zhuravna Zavety Ilyich Zavorovo Zagorskie Dali Abroad Zaovrazhye Zaprudnya Zaraysk Dawn of Communism Zakharovo Zverosovkhoz Green Grove Zelenogradsky Green Zendikovo Banner of October Zykovo Ivakino Ivanovka Ilinsky Ilyinsky Pogost Ilinskoye Ilyinskoye-Teryaevskoye Ilinskoye-Teryaevskoye Ilinskoye-Usovo Ilinskoye-Yaropoletskoye Industry Istra Kabanovo Kal Ininets Kalistovo Kamenskoye Karinskoye Kashino Kashira Klemenovo Klementyevo Klemovo State Farm Klenovo Klin Klyazma Knyazhevo Kokino Kokoshkino Kolychevo Kolyubakino Konobeevo Korystovo Kostomarovo Kosyayevo Koshelevo Krasnaya Gora Krasnaya Zarya Krasnaya Poyma Krasnovidovo Krasnozavodsk Red Weaver Red Hill Kratovo Krivandino Krutoe Kuzmino Kurovskoye Kurtino Kuryanovo Ladygino Lenkovo ​​Leontyevo Lesnoe Lake Summer holidays Letunovo Likino-Dulevo Lipin about Lipitsa Litvinovo Loginovo Loza Lopatinsky Lugovoi Village Luzhniki Lukeryino Lukino Lukoshkino Lukyanovo Lunev Lytkino Lyshchikovo Lvovsky Lyubuchany Makeevo Maksheevo Malaya Dubna Malivo Malyshevo Mamontovka Mamontovo Manikhino Mansurovo Marushkino Marfin Brod Maslovo State Farm Mendeleevo Mendyukino Meshcherino Meshcherskoye Mistsevo Mityakino Mikhailovskoye Misheronsky Mishutino Mozhaisk Molodezhny Moskvich Mostovik Muranovo Mukhanovo Nazaryevo Naro-Fominsk Narsky Narynka Nakhabino Nekrasovsky Nelidovo Nepetsino Nerastannoye Nizhneye Khoroshevo Nikitskoye Nikolo-Kropotki Nikolskoye-Gagarino Nikonovskoye New Village Novaya Olkhovka Novobrattsevsky Novogoriy Novozagarye Novopetrovskoye New building Noginsk Obukhovo Odintsovo-Vakhromevo Ozeretskoye Lake Beloe Sanatorium Ozery Olgovo Olyavidovo Onufrievo Opalikha Orudevo Osanovo-Dubovoye Ostashevo Pavlovskaya Sloboda Pavlov Sky Posad Pervomayskoye Perkhushkovo Petrovo Pecherniki Pirochi Povarovo Moscow region Sanatorium Podolsk Podosinki Similar Podyachevo Pokrovka Pokrovskoe-Sheremetyevo Polbino Poluryadenki Polushkino Pominovo Porechye Repairs Pravdinsky Privokzalny Privolye Prioksk Proletarsky Protekino Psarki Avian Wasteland Pushkino Pyshelitsy Radovitsky Raduzhny Ramenki Ramenskoye Rassudovo Rakhmanovo Redkino Rechitsy Reshetnikovo Reshotkino Rzhavki Rogachevo Springs Ruza Ryzanovo Ryazanovo Savvinskaya Sloboda Svatkovo Selkovo Selyatino Semenovo Semkhoz Senezh Sennitsy Sergiev Posad Serebryanye Prudy Serednikovo Serpukhov Simbukhovo Sinichino Sitne-Shchelkanovo Skoropuskovsky Sloboda Smenki Bullfinch Sobolevo Sokolova Pustyn Sokolnikovo Solnechnogorsk Sosnovka Sofrino Spas Sputnik Staraya Kupavna Staraya Ruza Staraya Sitnya Starikovo Old Town Stegachevo Stepanovskoye Stepantsevo Stepanschino Stolbovaya Stremilovo Scab on Sudnikovo Sychevo Taldom Taraskovo Tarbushevo Tatarinovo Tashirovo Tempi Teryaevo Timonino Tishkovo Tolstyakovo Topkanovo Torgashino Troparevo Trudovaya Tugolessky Bor Tumenskoye Tuchkovo Tyutkovo Uvarovka Uddelnaya Uzunovo Ulyanino Uspenskoye Uspenskoye Fedortsovo Fedosino Fedyukovo Fryazevo Kharlampeevo Khatun Kholshcheviki Khotkovo Khripan Chemodurovo Cherkizovo Chernevo Chernogolovka Cherusti Chismena Churilkovo Shalikovo Shatura Sha Turturf Sheino Shestakovo Shubino Shugarovo Shustikovo Elektrogorsk Elektrougli Yurlovo Yurtsovo Yakimovka Yakovlevo Yakovskoye Yakot Yam Yamkino Yaropolets Yakhroma Minskoe highway Warsaw highway Kievskoe highway Kashirskoe highway Novoryazanskoe highway Yaroslavskoe highway Novorizhskoe highway Leningradskoe highway Kaluzhskoe highway Dmitrovskoe highway Egoryevskoe highway Rublevo-Uspenskoe highway Ilinskoe highway Volokolamskoe highway Borovskoe highway Podushkinskoe highway Ostashkovskoe highway Rogochevskoe highway Shchelkovskoe highway Altufevskoe highway Kurkinskoe highway Skhodnenskoe highway Novoshodne nskoe highway Lotoshinskoye highway Rublevskoye highway Ilinskoye highway Uspenskoye highway

Simply called the Bulgarian. Using this tool, craftsmen perform many operations. It, like any other equipment, requires full maintenance. Moving elements need lubrication. For this purpose special means are used.

There are several options. Adviсe experienced craftsmen will help you choose the best way. The grinder will work for a long time and efficiently.

The role of lubrication

Manufacturers of the presented power tools, when manufacturing the tool mechanism, provide moving, rubbing parts with special lubricant. The composition of such products may vary. Therefore, wondering How to lubricate the gearbox of an angle grinder (Devolt) this or another brand), you need to look at the instructions. The manufacturer can clearly define the composition options that are allowed to be used when servicing equipment.

Under heavy loads in which the equipment has to operate, as well as when high temperatures heating lubricants prevent premature wear of metal parts.

Special components allow excess heat to be removed from rubbing pairs. Also, many manufacturers provide such an important function of their products as anti-corrosion. The complexity of the action allows you to ensure full operation of the tool and extend its operation for many years.

Specifications

To have an idea, how to lubricate the gearbox of an angle grinder (“Interskol” or products other manufacturers), it is necessary to consider the features of this tool. They influence specifications, which the lubricant must have.

The main and most loaded unit of the grinder is the gearbox. It consists of gears of a certain configuration. Proper lubrication can reduce friction and heat the moving parts. To do this, the consumable material must have a viscosity of no more than 800 Pa*s. Its dropping point must be at least 120ºС. The tensile strength is recommended at 120 Pa. This allows the product to form a durable film on the surfaces of the parts.

The lubricant must consist of soluble natural conditions components. It shouldn't cause harm environment and human health. Products from trusted well-known manufacturers have appropriate quality certificates, so they are recommended to be used for tool maintenance.

Signs of lubricant aging

Interested in how to properly lubricate the gearbox in an angle grinder, it is necessary to consider signs of lubricant aging. If the technician disconnects the gearbox from the angle grinder and looks inside, he can see obvious signs the need to change the composition.

When the unit operates, the lubricant sprays and settles in a dense layer on the inner walls of the housing. Over time, the substance dries out. In this case, lumps are formed. This indicates the need to change the lubricant.

As the temperature rises, the lubricant becomes more fluid. It may spread as it leaves the gearbox mechanism. To prevent friction, its amount must be controlled. If there is no thick layer of lubricant on the gears, then it is time to change it. Otherwise, the tool will quickly fail.

Foreign lubricants

To decide How can you lubricate the gearbox of an angle grinder?, it is necessary to consider a number of expert recommendations. They argue that you should choose the oil that is produced by the equipment manufacturer. Such compositions are not cheap. However, they have a balanced set of additives that provide long work Angle grinder. If the equipment user purchases other lubricants to service the power tool, the equipment may not even be covered by the warranty.

However, if desired, you can replace the compositions recommended by the manufacturer with similar products. For foreign models of angle grinders, products that contain additives identical to those used by the manufacturer of the angle grinder are quite suitable.

If molybdenum was present in the lubricant, it is necessary to purchase a composition marked MoS2. For Bulgarians who are served consumables second viscosity class, suitable composition NLGI2. Lubricants marked ISOL-XBCHB 2 comply with the ISO standard. If the product was manufactured according to German DIN quality standards, the new oil must contain the indication DIN 51825-KPF 2 K-20 in the marking.

Domestic lubricants

Considering how to lubricate the gearbox of an angle grinder domestic production, it is necessary to pay attention to locally produced compounds. Today Russian companies offer a wide selection of such products. They have an affordable price.

Modern domestic materials for lubrication of angle grinder gearboxes are characterized by: high quality. They meet high foreign standards. They are used not only in grinders, but also in other types of power tools.

The products of the Nanotech Metal Plaque Electra company are especially popular. However, there are other types of maintenance compounds for any angle grinder unit, including the gearbox.

Experienced specialists provide recommendations, What is the best way to lubricate the grinder gearbox?. They claim that if it is impossible to service the tool with a proprietary lubricant, you can choose a different composition. The second most popular lubricant in our country is recognized as CV joint lubricant. It is most often used for domestically produced tools. Some craftsmen choose lubricant for CV joints and for foreign angle grinders. However, the quality of the original compositions will be much higher.

It’s worse if the master gave preference to compositions such as litol or grease. This universal means. They are not capable of efficiently servicing the grinder’s gearbox system. If they are used, the operation of the tool will not be complete. At the beginning of operation, the difference will not be noticeable. But over time they may appear serious problems in the operation of the unit.

Preparing to change the lubricant

Having explored the options, how to anoint the grinder gearbox, it is necessary to delve into the process of applying a new composition to the elements of the mechanism. This procedure is carried out according to the power tool maintenance plan established by the manufacturer. This must also be done when replacing gearbox parts or rotor bearings.

The waste will have a dirty color. This is due to the ingress of metal particles and dust into it. Before lubricating the gearbox, it is necessary to remove old oil from the surfaces of the mechanisms. The waste is removed completely.

To perform this procedure, automotive engine cleaning products are suitable. You can also use kerosene or gasoline. Using these products, traces of old lubricant are completely removed from the surfaces of all parts. After treatment, the gearbox must be thoroughly dried. Only after this you can start refueling.

Gearbox maintenance

Having selected and prepared the mechanism for this process, you can begin servicing the tool. The product must be mixed thoroughly. It is applied thin layer on the gearbox parts. The mass is applied to the bearings using the packing method.

If the product is packaged in a tube, its neck is placed on the side of the bearing cage. The composition is poured inside until it flows out from the other side. Enough grease is filled into the gearbox so that it covers the gear teeth. The excess will flow out when the grinder is in use. Lack of lubrication leads to increased heat and friction inside the mechanism.

Experts recommend adding such an amount of substance so that it occupies almost half the space of the gearbox housing. In this case, the operation of the tool will be correct. The manufacturer may indicate in the operating instructions some of the nuances of this process. They should also be taken into account when servicing angle grinders.

Control

Having studied how to lubricate the gearbox of an angle grinder, a procedure should be considered to ensure that the tool is properly maintained. The angle grinder must be assembled and connected to the network. When starting the engine, the quality of filling the gearbox with lubricant is assessed. To do this, the grinder is placed in idle mode for a short time.

If the gearbox begins to heat up after the test, and traces of lubricant appear from the gaskets, it means that there is too much substance in the mechanism. After disconnecting the tool from the network, you need to open the gearbox cover. There will be excess oil on the walls. They are removed from the equipment cavity.

If extraneous noise appears in test mode, insufficient lubricant was applied. In this case, the tool is disassembled and an additional amount of compound is added to the gearbox. Then the verification procedure is repeated. If everything is in order, the tool can be used as usual.

Having considered how to lubricate the gearbox of an angle grinder, as well as the procedure for this process, each master will be able to service his equipment independently without any problems.

The grinder, like other tools used in household and professional activities, requires regular maintenance. Operating efficiency and long service life are ensured by timely maintenance.

Grease for an angle grinder is the main component when servicing the device. To improve performance, you should choose the right composition.

Substitution rules

The main modular unit of an angle grinder is the gearbox. It takes on the bulk of the load during operation. It contains helical gears that transmit torque from the rotor to the operating element. Lubricating the grinder gear reduces the friction force in the gears. It also helps reduce the temperature that occurs during operation.

In what cases should the lubricant be replaced? During operation, the lubricant coating scatters along the sides of the gearbox housing. After a short time it begins to dry out and lumps form. Lumps can accumulate dust and metal particles generated during operation. If, when disassembling the grinder, lumps are found, then new lubricant is needed for the grinder gearbox.

There are situations when it is necessary to replace parts of an angle grinder gearbox or a rotor bearing. In this case, it is necessary to disassemble the device. Accordingly, the lubricating layer will be removed. Instead, new material is applied.

During long periods of operation, the grinder's gearbox heats up. Accordingly, the coating used also begins to heat up. When heated, the lubricant becomes liquid and may leak out. As a result, little of it remains inside. This can be seen if you examine the gears. There should be a thick layer on them. Thus, with a small amount of lubricant coating, it is necessary to replace it.

Lubricant properties

The lubricating coating for gearboxes is characterized by the following properties:

  • viscosity no more than 800 Pa*s;
  • drop falling temperature is not less than 120°C;
  • tensile strength not less than 120 Pa;
  • absence of mechanical impurities;
  • corrosion resistance;
  • high melting point;
  • water repellency.

It is necessary to choose a lubricant that does not contribute to the occurrence of nicks in areas of contacting parts.

When choosing a coating, you should be guided by the condition that the lubricant coating for the bearing parts of the gearbox differs from the lubricating coating of the engine bearings.

Types of lubricants

Many people are interested in the question: how to lubricate the gearbox of an angle grinder so as not to damage the tool and increase its efficiency. The following types of lubricants are possible:

  • the brand of lubricant products corresponds to the brand of the tool manufacturer;
  • composition for CV joints;
  • grease and lithol.

Many tool manufacturers strongly recommend using a suitable lubricant during maintenance to avoid negative consequences during operation. When using a composition from another manufacturer, the tool is not subject to warranty repair.

Many people will think that lubricating the gearbox with the manufacturer’s compound is very expensive. After all, the cost of such materials is quite high. In addition, there are manufacturers that do not produce lubricants.

In this case, you can purchase CV joint lubricant, which is available in a wide range on the shelves of auto stores. This material allows you to achieve positive results during operation. And many people use this lubrication option. However, it is worth noting that this option is worse than the first.

When choosing solid oil or lithol as a lubricant, there is a risk of causing the instrument to quickly break down. This is due to the fact that these substances do not require use at elevated temperatures and high friction. Therefore, after some time, problems may arise during the operation of the tool.

Thus, the best option lubricant for angle grinders is considered to be the one that corresponds to the brand of the tool manufacturer.

Stages of the lubrication process

Lubrication can be done in special workshops or independently. When performing lubrication on our own It must be remembered that a lubricant that does not match the brand of the tool can cause tool failure. The process of processing with new lubricants implies the complete removal of the old lubricant layer. The parts and walls of the housing must not contain remnants of the old coating.

Stages of lubrication of an angle machine gearbox:

  • disassemble the grinder;
  • wash the sides and cavities of the gearbox with kerosene or a solution of kerosene and gasoline;
  • dry the washed parts;
  • mix new lubricant;
  • coat bearings and cavities;
  • assemble the tool.

When applying, the question arises: how much lubrication is required? Application large quantity lubricant will cause excess volume to leak out during operation. If the content is low, the operation of the gearbox will be difficult and will lead to rapid failure. Consequently, such a volume of material is placed in the housing that the gear teeth are hidden under the surface of the applied layer. The approximate content of the coating of angle grinder gearboxes is less than ½ the volume of the entire gearbox.

Checking the accuracy of application

The lubrication of the grinder, namely its abundance, is checked in idle mode during a test run on short period time. After starting, the gearbox begins to heat up. If some of the lubricant leaks out when the gearbox is warm, then it is necessary to disassemble the tool again and remove the excess.

If, as a result of a short period of idling, signs of noise or rattling appear, then the volume of the applied layer must be increased.

Getting high-quality lubricant with your own hands

If you want to use good composition lubrication of the angle grinder gearbox, but there is no possibility of purchasing it, then you should make it yourself using CV joint lubricant. Do not forget that the material used must have good adhesion.

The composition must adhere firmly to the rubbing elements. The composition for CV joints is characterized by increased adhesion and the ability to work at high temperature loads.

To prepare the mixture, a composition for the CV joint and MS-20 oil are taken to enhance the required viscosity and density. Using a homemade mixer, the composition is mixed with a small supply of oil (drop by drop).

You can also obtain material from a mixture of lubricants Tsiatim-221 and TAD-17. The main component is Tsiatim.

Popular brands of lubricants

Foreign-made gearbox lubricants are much more expensive than domestic ones. The Bosch brand is widely known among foreign brands. It is used to lubricate tools of the same brand, as well as other models of grinders. The coating has good performance qualities.

According to many users, the Huskey brand is considered a universal lubricant. It is perfect for many gearboxes.

Among domestic manufacturers, the products of the company “Nanotech” are known under the name “Metal Plak Electra”. Lubricants This brand is used for many components of electric tools.

Operating an angle grinder without a lubricant coating will first lead to minor operational problems and then to failure of the tool. Lubricated gearboxes will extend the life of the tool and increase productivity. The master himself decides which lubricant is suitable for the existing device.