Bedroom renovation - a review of the best modern ideas from the masters. Non-standard design solutions in the bedroom (110 photos)

In the life of every person, sooner or later there comes a period that frightens and makes a lot of nervous - repairs. When carrying out renovations throughout the apartment, special attention should be paid to the room intended for relaxation, the comfort in which is prerequisite. We are talking about the bedroom. It is very important to arrange it in such a way that it is pleasant to be in the room, and the atmosphere is conducive to relaxation and a wonderful pastime. After reading this article, you will learn how to make a beautiful renovation in the bedroom, spending a minimum of effort, nerves and financial resources on it.

photos

Development of a design project

Before starting the renovation of any room, it is necessary to draw up a competent design project, covering absolutely all aspects of the upcoming actions. Not everyone knows what a design project is, what stages it includes, and whether they are necessary.

A design project is called a set necessary documentation, design developments and list building materials.

To plan everything correctly, you must adhere to the following order:

• Stage 1 – discussion and determination of the budget. At this stage, all available financial resources are calculated that can be invested in renovating the bedroom. This stage helps to avoid unreasonable spending.
• Stage 2 – work with the designer. This stage involves developing the interior, drawing up plans and drawings, thinking through the smallest details regarding the furnishings. If finances do not allow it, it is not at all necessary to resort to the help of a specialist; you can draw up a plan yourself.
• Stage 3 – discussion of building materials. After discussing the concept of interior design, it is necessary to decide what construction and finishing materials will be used for repairs.
• Stage 4 – calculating upcoming expenses. The next step is to count required quantity materials, as well as upcoming costs, compiled based on real numbers. After calculation, the budget can either increase or decrease.

A design project should consist of these main stages.

Any small additions, equipping the room with accessories and decorative elements, which are not part of the finishing, are not prescribed in the design project.

DIY repair stages

There is an opinion that repairs are easy to start, but impossible to finish - they can only be suspended for a while. However, this opinion is a misconception, since with proper development of the project (as well as covering absolutely all the details), the repair can be considered completely completed.

Many people do not risk starting this process because they underestimate own strength and use the help of third parties, whose wages may be somewhat inflated.

One has only to study in more detail all the stages and complexities of this process, and it becomes clear that repairs need to be made with my own hands not that difficult.

You can slightly update the room by making minor cosmetic repairs that only affect external finishing walls, ceiling and floor. Light cosmetic repairs will be relevant in a room where there is no serious damage or parts that require immediate replacement.

When redecorating, there is not even a need to replace furniture, so the room remains almost the same as before replacing the decoration, it just takes on a slightly updated and more fresh look. For fundamental changes it is necessary major renovation– with complete replacement of furniture.

To make a major European-quality renovation, it is necessary to cover many details. It is worth understanding what is included in the process of this type of repair, what important details must be taken into account.

Window replacement

In houses with old wooden frames that have become unusable, as well as with plastic windows that are out of order, the windows may need to be replaced. Very often, this stage is skipped during the repair process because it seems excessively expensive, but its absence can lead to quite serious consequences. Old windows can allow drafts, moisture, and excessive freezing in winter.

Replacing windows yourself is not as expensive as doing it by someone from a construction company.

You just need to follow a certain sequence:

• It is necessary to take measurements from window openings and order the appropriate double-glazed windows from the company or purchase them in specialized stores.
• Next, the old ones are dismantled window frames. You should carefully separate them from the window openings, being careful not to damage the walls.
• Then you need to carefully prepare the window openings for installing new double-glazed windows. It is necessary to remove old materials used to install windows, as well as repair any damage that occurred during dismantling.
• After this, you need to install a new window, securing it with special metal pins, without which it simply will not hold up.
• After fixing the window in the opening, it is necessary to close all holes and cracks using polyurethane foam.
• The final stage will be puttying areas covered with foam, small cracks, as well as painting the slopes.

Replacement of windows is carried out first, since it may lead to damage to the covering of the walls, which is undesirable after decorating them. They may lose their original appearance, and the work will have to be done anew.

photos

Dismantling

The next stage will be the dismantling of all other components of the previous renovation, since new finishing materials cannot be applied to the old ones. You need to learn more about the process of dismantling old finishing materials and interior elements, as well as some life hacks that make this process easier.

During a major overhaul, you will also have to get rid of the doors - you will need to replace them. Dismantling doorways is a very important component of the whole process. First you need to remove the door leaf itself from the hinges, carefully dismantle the casing and the door frame itself.

When replacing old doors, it is necessary to take into account the size of the doorway, since in some cases it may need to be expanded or built up.

The process of removing old wallpaper can seem complicated and tedious if you peel off dry wallpaper from an unprepared wall. There are many life hacks that will help simplify the task.

Here are the most effective ones:

1. Wallpaper can be wet warm water or soap solution. For convenience, you can use a spray bottle or mop. The canvases should be wet enough so that after a while they can be easily removed from the wall.
2. If the wallpaper is wet and this does not make the process easier, you can use a water steamer. Hot steam in combination with already applied moisture will be a wonderful way, and the canvas will easily come off the wall.

If there are tiles in the room, they will need to be removed. This process is perhaps the most labor-intensive of all, since the tiles are attached to a special cement mortar, which is incredibly strong and reliable.

First you will have to get rid of the grout - using wetting, a sharp hard object or a small grinder. Cement-based grout can be quite strong, so it will take some effort.

Since the withdrawal process old tiles may be somewhat labor intensive, you will have to be patient. You can dismantle it using a strong iron spatula and a hammer, but this method can take quite a lot of time. Working with a hammer drill will be much faster and more efficient.

It is necessary to clean both the floor and the ceiling of old finishing materials. Depending on the coating used, the cleaning method will vary. For example, laminate, linoleum and parquet are quite easy to remove, as is tension ceiling canvas. But you will have to tinker with whitewash and paint, armed with a spatula and sandpaper.

Layout of necessary communications

If you want to make the bedroom more comfortable, you may need to separate communications. You can select existing options how best to do this, as well as communication options that can be routed to the bedroom.

First of all, it is electricity. Sometimes central lighting located in the central part of the ceiling may not be enough, so it’s worth thinking about additional points.

To save space, bedside floor lamps can be eliminated by using additional ceiling elements or wall sconces.

You can distribute electricity from the central lighting point, if it is quite powerful, from the electrical panel, if repairs are being carried out throughout the entire apartment, as well as from the nearest outlet. In the bedroom should be done hidden wiring, which will require wall gating.

In the same way, you can draw lines to create additional electrical access points - sockets.

If the bedroom is located next to the bathroom, toilet or kitchen, you can easily install pipes into the room by equipping it with additional point water supply

To do this you will need the following:

• first of all - a plumbing permit obtained from the BTI;
• well-designed circuit plumbing pipes;
• pipes for hot and cold water, other plumbing elements.

You should not make pipes in the floor, because if leaks occur, it will be extremely difficult to eliminate them without damaging the floor covering. It is best to use walls for this, securing pipes and covering this area with special cabinets.

The distribution of central heating is carried out in a similar way.

Rough finish

About to start the process finishing premises, it is better to take care of the draft. Not everyone knows what rough finishing is and what it is needed for. After all, not even every experienced specialist does it.

Rough finishing is necessary, because without it it is impossible to carry out a high-quality finishing. Thanks to preparation, you can significantly extend the service life of finishing materials, since they will be more securely fixed to the walls of the apartment.

In addition, it is believed that rough finishing can even slightly enhance the sound insulation and thermoregulatory properties of the room. This is understandable, because during rough finishing, all small cracks and holes missed during construction will be sealed.

It is worth noting that rough finishing includes the installation of communications and the construction of plasterboard structures.

It is necessary to take a closer look at the main stages of rough finishing, the features of each of them, and also familiarize yourself with the list of necessary materials.

Ceiling

The most difficult thing to do is rough-finish the ceiling, since during construction the slabs may not be laid quite evenly, and it may be necessary to level the surface. This need disappears if a tension or suspended structure is used as a ceiling finish.

If repairs have to be done in new apartment, the premises of which were not subject to the rough finishing process, may arise the need to eliminate clefts between the slabs ceiling. These gaps can be quite large, so they simply need to be eliminated.

It is best to eliminate cracks using polyurethane foam. A level ruler, as well as a painting mesh and cement mortar, will help make the ceiling surface more even. All irregularities and differences must be smoothed out, creating a completely smooth ceiling surface.

Top layer The ceiling should be covered with plaster, which will become the basis for further actions.

Walls

Rough finishing of walls is done using primer, plaster and putty.

Primer serves for better adhesion of materials to the wall surface.

By using plaster The surface of the walls is corrected, as well as any seams are closed and unevenness is smoothed out.

Putty is the final detail of the rough finishing of the walls. It is necessary for further finishing of the walls.

However, this is not all. As already mentioned, part of the rough finishing of the walls can be construction of additional partitions and interior designs . If it concerns decorative partitions, just use thin materials, but for serious interior floors, more durable options are needed.

As for decorative partitions, in most cases they are constructed using plasterboard sheets, mounted on special metal profiles and forming a hollow space. Such a partition does not provide sound insulation and does not retain heat in a separate part of the room.

To construct full-fledged interior floors you will need concrete blocks or regular bricks. In addition, foam blocks and cinder blocks are quite popular, durable and practical. The blocks are fastened together using cement mixture, A finished design covered with a thick layer of plaster and putty.

Floor screed

Another stage of rough finishing is working with the floor, namely, screeding. The floor screed is called the intermediate layer flooring, which separates the foundation laid during construction and the elements of decorative finishing.

Floor screeding is necessary for several reasons:

• the base, as a rule, is not very level, it has many flaws, so screeding is done to level it;
• if pipes and heating are installed under the floor, a screed will also be necessary, since this wiring will need to be hidden;
• screed is also necessary for competent, safe distribution thermal insulation properties;
• Screeding is also carried out if there is a need to create any slopes.

Laying the final floor covering without screeding will make the coating ineffective and reduce its thermal insulation and sound insulation properties several times.

The screed also has a slight soundproofing effect. This is especially true for renovations in a bedroom located in a new building, since the sound insulation properties of such houses, as a rule, are reduced to almost a minimum.

Rough finishing of walls and screeding of floors helps reduce noise levels.

There are several types of screeds, and each of them has some characteristic features.

Wet screeds are made by combining a dry mixture with an aqueous solution. Ties of this type exist in two versions: connected and floating (serving to provide the greatest degree of sound insulation, which is ensured by laying the mixture on special mats).

Dry screeds placed on the surface using expanded clay and special slabs. Surfaces are treated with plaster or cement mortar to hide the resulting seams.

Ceiling and wall primer

After leveling the surface and applying putty, it is necessary to prepare the walls and ceiling for final finishing. To do this, you need to apply a layer of high-quality primer. The primer is a special solution that serves as a kind of adhesive between the surface of the wall or ceiling and the finishing material.

The primer also has protective properties, preventing moisture loss from finishing materials. The thing is that concrete has the property of excessively strong absorption and sucking of moisture, which can lead to fairly rapid drying of the material, loss of all elasticity and premature failure.

Primers are divided into several types and are selected in accordance with the surface to be primed. In addition, the choice is influenced by the humidity of the room and the purpose of the material.

One type of primer is created to serve as a layer between building and finishing materials, while others are needed only for treating the base of a wall or ceiling. And still others have completely different properties. deep penetration, which is very important for walls made of fragile, bulk material.

The primer may have to be applied in several layers, depending on the type of mortar itself and the wall surface it is being applied to.

You can begin the final finishing only after all layers of primer have completely dried.

To determine whether the wall needs additional priming, after the first layer has dried, you need to run your hand over the surface. If dust remains on your palm from the material from which the wall is made, you should repeat the procedure.

Finishing

After rough finishing and preparation of the walls and ceiling, you should begin finishing. It includes decorating the walls, ceiling and floor with the necessary finishing materials.

Materials must be selected in advance, since the preparation of the walls must be carried out in accordance with the type of finish.

Don't be too smart when choosing materials. By overestimating your strengths, you may simply not cope with the task and not complete the bedroom renovation as you would like (or not complete it at all). However, the choice of material will be discussed a little later; now the main stages of final finishing and their features will be considered.

Finishing includes work on the surfaces of walls, ceilings and floors.

The sequence of processing the parts of the room that need to be decorated may vary, depending on the chosen finishing material.

Ceiling

The ceiling is finished first if plaster, paint, or ceiling tiles attached with special glue are chosen as finishing materials. This stage should be the first, since these materials are quite easily soiled and can damage the decor of the ceiling and floor.

Whitewash and paint must be applied to a primed surface, but to secure the tile decor, you will have to first plaster and putty the ceiling, since the glue does not always adhere well to the concrete surface.

photos

First of all, it is produced construction of suspended ceiling structures and niches. Since such elements are made from sheets of plasterboard, the surface will also need to be plastered and puttied, after which it will be necessary to apply a primer and paint. In any case, the painting process may result in contamination of the surrounding area.

A installation of stretch ceiling carried out at the final stage of finishing. It will be very difficult to paste wallpaper under an already stretched canvas, and decorating walls with plaster will be completely impossible. A stretch ceiling does not in any way affect the cleanliness of walls and floors, since no liquid adhesive or painting materials are used for its installation.

To install the tension fabric on the wall (a few centimeters from the ceiling), special fastenings are constructed metal profiles. After this, the canvas is heated with special air guns and stretched around the perimeter of the entire bedroom. The edges of such a canvas are tucked into the profiles - and thereby fixed.

Walls

Everything is clear with the stages of finishing the ceiling, next step is wall decor.

Most selected suitable option- depending on the surface of the wall itself, room temperature, humidity level and individual preferences.

If the choice fell on ordinary wallpaper with pattern, everything is quite simple here - high-quality glue with the appropriate characteristics is selected, the wallpaper is cut into sheets of the required length, coated with glue and attached to the wall. If necessary, you can apply glue to the wall itself too.

If the choice fell on wallpaper with a pattern that needs to be matched and adjusted, you should cut the canvas in advance to cover the entire perimeter of the room - taking into account the creation of a complete picture.

photos

After pasting wallpaper for painting It is necessary to dry thoroughly - and only then paint.

photos

It is worth noting that you can paint both simply primed walls and surfaces decorated with finishing plaster, with which you can create an interesting textured surface.

Rules painting walls do not differ from the process of painting any other elements of the room in anything special. First, you need to apply paint with a brush to the edges in the area of ​​​​the floor and ceiling, as well as to the corner openings, after which (armed with a roller with the appropriate surface) you will need to paint over central part walls.

If the ceiling has been pre-painted, be careful when applying paint to the top of the wall. There is no need to touch the surface of the ceiling.

photos

Floor

Floor finishing is the most the last stage, completing the repair, since painting the floor surface is carried out very rarely, and in general, the process of decorating it in a special way does not affect the safety of the walls and ceiling.

What is really worth considering before the process of finishing the entire room is equipping the floor with heating mats (a heated floor system that will be very relevant for a sleeping area - especially if the room has a balcony).

Some types of heated floors require careful fixing. When laying mats on an already dried screed, they must be fixed with special glue or cement mortar. Some particularly powerful elements are even fixed before the surface is screeded.

photos

Special attention should be paid to parquet and parquet boards, since the final stage is the application of a special coating - parquet varnish.

Of course, an important aspect of any repair process is the choice of high-quality building materials. You need to understand what needs to be taken into account when choosing, what should be given Special attention, and also learn the features of the most popular materials.

It is necessary to analyze the supply market in order to identify the most favorable price variations of the same product. The process of renovating (even one bedroom) requires considerable investment, so a little saving definitely won’t hurt.

It is worth considering what qualities and characteristics need to be taken into account when choosing a particular material:

• Any material should not have any strong unpleasant odors. The slight odor left behind from factory products quickly disappears, but the pungent odor characteristic of low-quality cheap materials can persist for quite a long time, having a detrimental effect on human well-being.
• The material must have antistatic properties, preventing the accumulation of static electricity, which can disrupt comfortable living conditions.
• It is very good if the material contains antibacterial components, preventing the occurrence of fungi and the proliferation of harmful bacteria, which may also not have the best effect on health.
• Of course, the material must be beautiful and provide a wonderful rest, since the sleeping area is designed specifically for this.
• Any construction and finishing materials must be durable and wear-resistant, since annual renovation of the premises through renovation is expensive and unreasonable.

You can select the most suitable finishing materials for various parts rooms.

For the ceiling

For convenience, it is worth considering the advantages and disadvantages of various ceiling coverings using the comparison table as an example.

	Peculiarities	Advantages	Flaws
Whitewashing the ceiling	This is done using a sprayer, roller or brush.	Simplicity of execution, neat appearance.	Preliminary leveling of the surface, high degree soiling, fragility.
Painting the ceiling	This is done using water-based or water-dispersion paint.	Possible choice budget materials, ease of execution.	It peels off quickly, needs to be renewed every couple of years, preliminary filling is necessary.
Drywall	Constructed from plasterboard sheets and metal profiles.	With special technology, you can build a structure of any shape.	Such designs “eat up” the free space of the room.
Suspended ceiling structures:
Cassette	Consists of thin plates made of aluminum or galvanized materials.	Easy to install, easy to clean, hide surface imperfections.	Low degree of sound insulation and noise suppression.
Hemmed	Installation is carried out using plasterboard and decorative panels.	The ability to use different lighting, retains heat well and muffles noise.	Required decorative finishing, it is impossible to install ceiling electricity distribution.
Rack and pinion	Consist of narrow aluminum plates.	Various decorative finishes are possible and are suitable for rooms without heating.	Not suitable for residential premises.
Wallpaper for the ceiling	Thick ceiling wallpaper and appropriate glue are used.	Cleanliness in the process, easy to hide ceiling defects, durability.	Cheap wallpaper quickly loses its original appearance and cannot be removed from dirt.
Stretch ceiling	Constructed using metal profiles and special fabric, stretching when heated.	Suitable for rooms with high humidity, retains its original appearance for a long time, installation of lamps is possible, fireproof, does not require special care.	Intolerant to mechanical stress from sharp objects.
Ceiling tiles	The tiles are made of polystyrene foam, size 50x50 cm.	Big choice surfaces and shades, easy care.	Labor-intensive work, fragility of the tiles, fragility of the base pecks.

For walls

The best option for decorating bedroom walls is non-woven and high-quality vinyl wallpapers . It is best to choose meter ones, since they are more convenient to glue, and the whole process will take much less time.

Wallpaper in neutral light shades is suitable, since bright colors are not very appropriate in the bedroom.

For those who want to add color to the bedroom interior or create an atmosphere of something unusual, finishing decorative plasters or unusual photo wallpapers, pasted on one of the central walls.

For floor

There are quite a lot of flooring options, you can choose any one - in accordance with individual tastes and needs. For example, it is considered the easiest to install linoleum, which looks quite attractive. In addition, a newfangled development is environmentally friendly linoleum, with hypoallergenic components in its composition.

Considered similar in ease of installation carpet- carpeting distributed over the entire floor surface of the room. This material can be laid in the bedroom if you are interested in softness and warm floors. The disadvantages include the inconvenience associated with caring for such material. Carpet has many advantages.

Laminate is the most common floor covering. It is affordable, practical and will last quite a long time. There are quite a few design solutions: you can lay white, brown, dark or colored laminate on the floor.

It is impossible not to mention parquet board . This coating is of better quality than laminate, but it has one feature - it is necessary to cover the floor with a special parquet varnish.

As a special design move, you can use the construction of a structure two-level floor, decorated with different finishing materials. A two-level floor will be the highlight of the bedroom interior.

Often, it is simply necessary to begin renovations in an apartment; the reasons may be completely different, but the purpose of such renovations is always the same. Renovation in a small bedroom is very difficult task, which you need to try to solve.

If everything is clear with the kitchen and bathroom, then with the bedroom everything is much, if not sadder, then very vague and serious. Since the bedroom is one of the special rooms in an apartment or house, there must be a special, tactful, thoughtful approach to its renovation.

It is no secret to most experts that even the most experienced designers Often they simply cannot make a design project for a bedroom, since such a place in the house is very difficult not only to renovate, but to choose the right design and color scheme. And what can we say about builders who simply don’t know where to start.

But still, some people think that renovations in a small bedroom should be entrusted exclusively to professionals and specialists in their field, who can competently carry out not only a design project, but also carry out the renovation itself.

Modern bedroom renovation

However, if for some reason you do not want to invite construction crews, then you yourself, using your theoretical knowledge and some skills, you can make beautiful renovations in the bedroom. After all, no one can guarantee that your family budget will be able to afford the services of qualified workers.

In order to start your planned business, you simply need a positive attitude, a few lessons from familiar specialists and, preferably, consultations with professionals. If you are new to this business, then it is better to start repairs not alone, but as a team, since knowledgeable people must and must help you resolve this serious issue. Inexpensive bedroom renovation photo:

So, before you start renovating a small bedroom, you need to ask yourself a few important questions:

• How many people will use the bedroom for its intended purpose?
• Where will the laundry be stored?
• Will the bedroom perform exclusively its function, or will it also combine an office for work or just a place to relax?
• Will there be a single or double bed in your bedroom?
• Is there a plan to watch TV in the bedroom?

After you answer the questions, you can safely start organizing the bedroom itself. Modern bedroom renovation involves creating an ideal, cozy, spacious and functional room.

Since the bedroom is a place for relaxation, then for starters, you just need to take care of the heating first. If the bedroom is poorly heated, then you just need to change the radiators and insulate the floor. Since the bedroom simply must be as bright as possible, take care of new plastic windows. Ideas inexpensive repairs in the photo of 2020:

It is worth choosing finishing materials that are environmentally friendly and breathable, since most A person spends his free time from work while at home in the bedroom.

It is worth noting that the textures and ranges of colors on this moment exist in huge quantities. But many experts argue that the most the best option, as a rule, is green color. Inexpensive bedroom renovation photo green bedroom option:

If we talk about renovations in a fairly small bedroom, then in no case should there be the use of dark colors, since dark shades visually reduce space.

When choosing wallpaper, paint and more, pay attention to the shade you choose. Remember, the brighter your bedroom, the better. Because harmony and comfort are achieved much faster.

If you are thinking about not painting the ceiling, but installing a stretch ceiling, then white is more suitable for these purposes. glossy ceiling. White color will be another plus to visually enlarge a particular space. Beautiful renovation in the bedroom also requires proper placement of mirrors.

Have you ever thought that a lift-up bed can fit very organically into a small room? It will save space and highlight the modern renovation of your bedroom in a very original way. And things can even be stored convenient ways using a wardrobe for this purpose.

But if you want your bedroom to become more spacious and at the same time more comfortable, it’s enough to get rid of the clutter of various things everywhere. Resort to the most ideal solution - remove all unnecessary things to other rooms, leaving the most necessary and necessary things in the bedroom. Ideas for inexpensive bedroom renovations are presented in this useful video:

You simply need to approach the decision of choosing a bed with all responsibility, simply because it is the most basic item in your bedroom. When choosing a bed, pay attention to the materials that were used in its manufacture, and also look for possible reviews buyers.

As for the light in the bedroom, there is no need for excessive brightness. One of the most successful decisions regarding light will be the purchase of lamps with adjustable lighting. This is connected not so much with the creation of romance, but with the saving of light, which will be visible. A beautiful renovation in the bedroom will be made by spot lighting on the stretch ceiling and beautiful lamps at the head of the bed.

And have certain skills in this area. Before you begin this difficult, but truly aesthetically pleasing process, be sure to determine the functionality of the room so that it will be easier for you to draw up a project.

If you want to see examples quality repairs bedrooms, photos are shown in our gallery.

What to consider when drawing up a project?

Before you renovate your bedroom, draw up a project. This can be done using a special computer program, but if you do not have the skills to work with it, just draw the layout of the room on a piece of paper.

You should start drafting with a definition. Decide in advance on the width and design of the bed. Remember that these parameters affect what other furniture attributes will be located in the bedroom.

The bedroom renovation design in the photo was made using a simple computer program

Be sure to plan your bedroom in such a way that the bed is easily accessible. If two people will live in a room, it is advisable to make convenient approaches to sleeping place on both sides.

Photo of a bedroom renovation with a comfortable approach to the bed

The bedroom design should also include the location of other elements and large decorative details. You should also note the electrical wiring diagram on it if you are planning a major rather than cosmetic renovation of the bedroom with replacement of wiring.

Which style should you choose?

Bedroom renovations can be done in different styles. The choice is influenced by several factors, but the most important are the square footage of the room and the personal preferences of the apartment owners.

What style to use for a room with a small square footage

Where to start renovating a bedroom? Of course, from the ceiling decoration. Regardless of whether you plan to level it, plaster it, paint it, or stretch it, you should always start with it.

Bedroom renovation, design, real photo demonstrates installation of stretch ceiling

European-quality renovation of the bedroom, in the photo the room is completely ready for use

Tips and tricks for renovations in small and narrow spaces

Creating beautiful and functional interior may be difficult if the bedroom area is small. Most often, small rooms arise as a result of redevelopment in an apartment or house, for example, after expanding the living room. They also differ in their small area. In these cases, carrying out repairs, as well as choosing a design, requires a special approach. If you want to see a beautiful and competent renovation in a small bedroom, photos are waiting for you in our gallery.

The most successful options for decorating small rooms in Khrushchev

Small rooms in Khrushchev (3 by 3 or 3 by 4 m) should be decorated in light colors and contain a minimum of furniture. It is better to paint the ceiling in such a room or make it suspended. Plasterboard construction can make the room lower and visually smaller, which means it’s best to avoid using it.

Bedroom renovation in Khrushchev, in the photo there is an example of an original stretch ceiling

Photos of renovation ideas for a narrow bedroom, the interior decoration is made in Japanese style

Don’t forget about the main rule for renovating narrow spaces. The main accents should be used on short walls, and try to make long ones less noticeable. By accents we mean brighter wallpaper or carpet, if its use is allowed by the style. A small wall can be covered with bright colors.

Wallpaper with a large pattern in a narrow room is the main accent of the room

Interesting idea: A narrow room for a boy or teenager can be decorated in nautical style. The white and blue color scheme inherent in this style will help visually expand the space.

The ideal bedroom is one that harmoniously combines practicality with aesthetics. An intimate atmosphere reigns in the bedroom; this room reflects the personality of the owners more than others. When undertaking a renovation, it is better to abandon excessive pretentiousness and extravagance. The ceiling, walls and floor in the bedroom should not create a oppressive environment.

The peculiarity of the renovation and furnishing of the bedroom is in maintaining an ideal balance, in which each piece of furniture would be significant in itself, but would not be an aggressive center of pressure. In such a room it is guaranteed good vacation, sound, healthy sleep.

Don't think that simplicity of decoration will reduce the cost general form premises. Modern building and finishing materials can work wonders and create real masterpieces of design. However, you don’t have to choose expensive ones. Leading manufacturing companies, along with expensive goods, today offer materials for repairing and decorating bedrooms at very affordable prices.

You can renovate your bedroom with your own hands, turn your own ideas into reality, or look for some ideas in thematic magazines and online resources. Detailed instructions will allow even beginners to clean up their apartment.

The main thing in a bedroom renovation is proper zoning, lighting, maximum environmentally friendly materials for ceilings, walls, flooring. Draw up a room design project, create a room of maximum comfort.

Where to start: bedroom renovation step by step

Perhaps everything was fine in your old bedroom setup. In this case, the renovation (unless it is major) will update and refresh the room. You can re-stick the wallpaper and tidy up the ceiling with your own hands. Even the floor during cosmetic repairs is sometimes left unchanged if the previous coating has not lost its freshness and attractiveness (if necessary, laying linoleum, carpet or laminate yourself is also not difficult).

If a major overhaul with redevelopment, replacement of wiring, heating equipment, updating and leveling the floor, changing the shape of door openings, then you will probably need specialist advice (or you will generally decide to entrust the entire scope of work to builders).

In any case, you will have to control the progress of work. The first thing you need to do is draw up a design project, the basis of your renovation. Be sure to note your vision for the bedroom after the renovation. There are special computer programs for this, but even a plan drawn up on plain paper will be of great benefit.

• At the design stage, you should take into account the area of ​​the room (this will help to properly zone the space), the possible arrangement of a workplace or dressing room (if the bedroom is initially isolated from other rooms in the house or there is no other way to make the room isolated).

• What follows budgeting, turn to compile a list of necessary construction and finishing materials. Here too you can rely on own experience and strength or discuss it with experts in the matter - builders, designers. Focus on ratio high quality- reasonable, affordable price.

• Before starting renovation work, empty the bedroom of all furniture, remove switches, sockets, and remove the chandelier. If you are not going to change them, cover windows and doors with cloth or film to protect them from damage and scratches.

• Get rid of old coverings (clean up the whitewash, remove tiles, paint, wallpaper, remove the floor covering if you are repairing the floor, remove thresholds, baseboards). Dismantling can take a lot of time; skill and attention are required (the better all surfaces are cleaned of previous materials, the smoother and better quality the new cladding will lie on it).

• The most difficult stage is redevelopment rooms, replacement of structures or individual elements. Renovation in the bedroom will begin precisely from this point, if you are thinking of changing anything in the redevelopment (demolish, erect partitions, for example, install new radiators, arrange ventilation system, conditioning, carry out full range electrical work, replace doors, windows).

• Alignment surfaces may not always be needed. If the walls and ceiling were smooth before or have already undergone a similar procedure, then there is no need to repeat it. Minor damage is eliminated using putty, leveled using putty compounds, a spatula, the surfaces are primed, and allowed to dry thoroughly (a day or two). Floors are leveled using cement screed or self-release mixtures.

• The most long-awaited and creative process - cladding surfaces and furnishings. This is the final piece of this bedroom renovation.

When you start renovating your bedroom, help yourself: draw up a design project and follow the steps outlined in it exactly. Once your budget has been created, start preparatory stage- empty the room of furniture, remove old coverings. Putty and primer will eliminate the defects, after which you can begin tiling and furnishing the bedroom.

What do you need to know about materials?

You should try to choose high-quality finishing materials for any room. However, if your financial capabilities are limited, make sure that the safest, most environmentally friendly clean materials went to renovate the bedroom.

Choosing window, please note that plastic structures do not allow air to pass through and can cause allergic reactions; for allergy sufferers, the most suitable option is wooden “breathable” windows. But the best sound and heat insulation, the simplest operation and maintenance are provided by plastic windows.

Don't give up doors in the bedroom (today rooms without interior doors), because the door in this case not only serves as a barrier for strangers, but also prevents sounds and odors (kitchen, sewer) from entering. So choose as responsibly as possible. door block to the bedroom, install it correctly.

The bedroom is a special place in the apartment, where a person spends an average of about 8 hours sleeping. Such a long stay in one room requires a special approach to the choice of finishing materials: maximum environmental friendliness and health safety.

Ceiling in the bedroom

There are several ways to repair ceilings:

• puttying;
• cover with plasterboard;
• install tension structures.

Puttying is a serious, difficult job. If you have no one to help, there is no way to entrust the work to a specialist, and the ceiling defects are too obvious and obvious, then use the training video (these lessons give good skills), or immediately install a plasterboard ceiling. Working with this material is not difficult, you can quickly gain the necessary skills and make beautiful, flat ceiling in the bedroom with your own hands.

This is advisable for several other reasons:

• plasterboard structures level out surface differences;
• on their basis you can create any multi-level ceilings;
• it is immediately possible to hide communications and wiring;
• Any type of lighting can be arranged.

Modern stretch ceilings, varied in texture and color, also hide imperfections well. They are also arranged in several levels, and the lighting is decorated differently. An additional advantage of such a ceiling is its resistance to moisture (you don’t have to be afraid of flooding by your neighbors).

The color of the ceiling in the bedroom depends on the taste of the owners, but the classic approach is this: you should focus on the size of the room and the chosen interior design style. Please note that a dark ceiling will visually make the room smaller, while a light ceiling will add space. Choose not too saturated, calm colors that maximize relaxation. Refuse the multi-colored ceiling; it will look appropriate to look small color accent in the center.

It is difficult to make a putty ceiling in a bedroom yourself. It is much easier to install plasterboard or suspended ceiling. In any case, avoid bright colors ceiling surface, opt for soft, calm colors.

Bedroom wall renovation

Rough repairs to the wall surface in the bedroom can be done using plastering or drywall. As with the ceiling, plastering the walls is not an easy procedure that requires skill. If the walls have too large depressions, then plaster will not help; the surface, even if a thick layer of material is applied, will still not become perfectly flat. At relatively smooth walls you can achieve excellent results without losing useful space.

Drywall will come to the rescue here too, because it is economical and simple, walls with any flaw will turn out perfectly smooth. However, such wall covering hides the space and makes the room area smaller. To decorate bedroom walls, wallpaper (non-woven, paper, textile) of soothing colors or decorative plaster.

Level the walls in the bedroom with plaster or plasterboard sheets. Decorative plaster or wallpaper are suitable for finishing walls.

What finish is suitable for the bedroom floor?

A cold floor in the bedroom is unacceptable; if it is not possible to install a “warm floor” system, then choose the most suitable materials - environmentally friendly, pleasant to the touch, easy to clean:

• laminate;
• cork;
• parquet;
• linoleum;
• carpet;
• bulk

In a small bedroom, lay laminate or parquet diagonally, this will visually expand the space. Any of the materials today is presented in construction stores in a wide range to suit every taste.

The completion of the bedroom renovation is the furnishing of the room. Try not to clutter the room, limit yourself to necessary set pieces of furniture. Taking into account all the tips listed above, your bedroom will always be spacious and comfortable.

Video: Bedroom interior design - tips and tricks

Living room renovation: how to create a cozy corner?

A bedroom is a special room that reflects the personal qualities of the person living here. Having retired to the bedroom, we can relax and unwind from the everyday hustle and bustle. How to renovate a bedroom yourself?

Before you start renovation work in the bedroom, you need to think carefully about what kind of finishing it will be and what decorative details you would like to add.

Step 1: Drafting a project

Before drawing up a project, you need to decide on the functionality of your bedroom. Then the project will be much easier to draw up. Nowadays, there are computer programs that can be used to easily and quickly create a project. For those who are not very computer friendly, you can, of course, use the old method, draw a project on a sheet of paper.

The first aspect of the project will be the space for the bed. Here you will need to decide what the width and design of the bed will be. Because, based on this data, you can further plan what other interior attributes you can place in the bedroom. The bedroom should be designed in such a way that there is a free approach to the bed.

Well, if there are two people in the room, then there should be a free approach from both sides.

We also make sure to include all other large furniture elements and decorative details into the bedroom project.

If the repair is major, then we note in the project the electrical cable layout plan.

The bedroom can be made in different styles. This will be influenced by the square meters and preferences of the residents of this apartment.

Step 2: Choose the style of the room

What bedroom renovation ideas are there for a small bedroom?

Bedrooms with an area of ​​10-12 sq. m, no need to furnish it with a lot of furniture. In this case, a great option is the style of minimalism, or high-tech. You can also make repairs in a small area in classic style. It means light colors. Classics using furniture in vintage style, is currently considered a popular design solution.

In addition, Scandinavian and Mediterranean style. Here everything is also done in light colors, but bright colors can also be allowed.

All previously described styles are also suitable for bedrooms with an area of ​​18-25 sq.m. IN Lately It has become very fashionable to decorate bedrooms in Provence style. This style is perfect for a couple's bedroom or a girl's bedroom.

Provence is the oldest French style, which implies signs rustic style and due to this, the bedrooms look simple and beautiful on the one hand, and mysterious and unusual on the other.

Step 3: Repair stages

So how to renovate your bedroom? Repairs must be carried out consistently, then in the end the repair will be perfect.

We remove furniture

If possible, we remove all furniture from the room and begin dismantling old building materials. Remove the wallpaper with a spatula. This must be done very carefully. The better you remove the old wallpaper, the easier it will be to glue new ones.

Removing the plaster

Don’t forget about the ceiling, if plaster has crumbled somewhere on it, it must be carefully removed.

Dismantling the doors

Removing the floor covering

And lastly, we remove the flooring and remove all construction debris from the room.

Wiring

Replacement of wiring is carried out before cosmetic repairs. But the wires into the cable channels are placed after the walls and ceilings are finished.

Finishing and renovation

Bedroom renovations always start from the ceiling, regardless of its type of decoration. After the ceiling comes the finishing of the walls. Once the finishing of the ceiling and walls is completed, we begin installing the flooring. After this, the interior door is installed.

The remaining minor repairs will be completed eventually. This is, for example, screwing cables, installing skirting boards, etc. After completing all repair work, we carry out a general cleaning of the room.

In the bedroom after renovation, you should definitely carry out a thorough wet cleaning. Then we ventilate the bedroom well and then just arrange the furniture, hang the chandelier and curtains.

If necessary, we arrange decorative items and flowers.

Create beautiful interior It's not so easy in narrow bedrooms. Often narrow rooms are obtained when remodeling an apartment. There are also such bedrooms in five-story buildings called “Khrushchev buildings.”

Furniture

In such situations, repairs and design choices must be approached very responsibly. Such bedrooms should be decorated in light colors and there should be a minimum of furniture.

Ceiling

For the ceiling, the best option would be to paint it, again in a light color or make it stretch. It is better to abandon the idea of ​​hanging plasterboard on the ceiling, because it makes the room lower and visually smaller. And even without that, our area is quite small.

Walls

We cover the walls light wallpaper with a simple design.

Floor

Gender may be dark colors, but in color scheme furniture should dominate light shades. The bare minimum of furniture is a bed, bedside table and a wardrobe, it is better to purchase a corner one, this will help further save space.

After completion of the repairs in narrow bedroom add some bright accessories. Thus, we will transform the interior.

The main rule when renovating narrow bedrooms: we place the main emphasis on short walls, and make long walls as less noticeable as possible. By accents we mean a bright carpet or wallpaper. If, of course, this is permissible by the chosen style.

The technique for renovating a bedroom is practically no different from renovating other rooms. The main task when planning is to make the room as comfortable as possible, conducive to relaxation and healthy, full sleep.