Building a hidden trap in Minecraft. How to make a trap in Minecraft: simple engineering solutions
With a sliding floor, based on sticky pistons and tension sensors. Dig a hole for the sticky pistons as shown in the picture. Place sticky pistons in the resulting recesses. Place two blocks on the ground above; sensors will be attached to them later.
Now pay attention to the following image. Here you must attach a red one to the ground block on the surface, and place a red repeater next to it. Set its delay exactly as shown in the example. Draw a path of red dust towards the sticky pistons. The same must be done on the other side, for the opposite row of pistons.
Next, let's deal with tension sensors, place them on blocks of earth with inside same as in the picture. Use a thread to connect them. The distance between two tension sensors must be at least 1 block. Now the whole circuit is fully operational, it can open and close when passing through the sensor threads.
In order for the victim to die by falling into a trap, you need to dig a hole under the middle blocks between them and fill it with lava. You can also put cacti, but the first option is still more effective. To open the trap while working with the pit, ask a friend to stand on the tension sensor, or throw any object there, it will perform the same function.
The mechanics of the Minecraft game provide great amount traps, the choice of which is limited by your imagination and what you have in your inventory. The more complex the trap, the more complex and less accessible ingredients it will require. In addition, traps differ in purpose. Some are worth using to catch creatures, some are only good for guarding your treasures.
How to make a trap in Minecraft
Trap Chest- nothing more than an alarm that is installed on the chest with your favorite treasures. But first, this same chest needs to be made, for which you will need eight boards, which must be placed in the crafting window in the shape of a square. Then you will need to make a tension sensor; for this you need to acquire an iron ingot, boards, and a stick. To get the desired item, place the specified items horizontally in the middle part of the crafting window. Then you need to assemble the trap. To do this, connect two objects, and there should be a chest in front. Mousetrap- a trap in the full sense of the word, which should be used to catch a monster. Externally, the trap looks very effective, as it is durable wooden box with the same strong door. To make this trap, you will need to create four doors from six planks and six iron ingots, placing them throughout the center and left side of the crafting window. You will also need to create a pressure plate, which will require two boards and two stones. They will take up the entire lower right side of the crafting window.
Once the components are ready, the pressure plate should be placed on the ground in the area where you want to create the trap and place the doors around it. Moreover, they must stand vertically. In addition, each door will face one of the parts of the world - north, south, west, east. Next you should show your imagination - the doors will need to be disguised.
The principle of operation of the trap is extremely simple. If the victim steps on the pressure plate, the doors slam shut, preventing them from escaping.
Floor with a surprise- a somewhat more complicated trap in comparison with a mousetrap, but no less effective, for the manufacture of which you will need: four pistons, a red stone, a pressure plate, and eight fence blocks. How to make these items was described above, so there is no need to repeat yourself, but it is better to go straight to the description of the manufacturing process.
The first thing to do is dig a cross-shaped depression in the ground and place a red stone in the center of it. In addition, there should be a piston in the recess on each side. Then the pistons need to be covered with fence blocks. The red stone will also need to be covered. It’s up to you to decide what. This can be any block. The trap is ready.
When playing online, it will be useful to learn how to make a trap in Minecraft. She can help lure the player by taking his things or protect herself and her home from griefers. Below are best examples simple and complex mechanisms. Traps are very popular in Minecraft, especially in server games.
Corridor with a pit
This design is actively used for griefing in private. The idea is to construct a narrow corridor one block wide at the entrance, with two doors at both ends. The floor is connected to sticky pistons, the control lever is located directly in the house. The first door opens with a pressure plate from the street, the second does not have one.
Usage: Your goal is to make the player chase you. Once he passes the first door, it will close. At this time, you slam the second one from the inside, after which the victim remains locked in the corridor. All you have to do is use sticky pistons that will move the floor away - you can make a hole below or spill lava.
Soul sand stopper
How to make a trap in Minecraft that will catch mobs? Just place the soul sand on the floor, on top, at the level of human height, arrange four blocks in a cross so that there is emptiness above the soul sand. As soon as any monster steps on him, he will no longer be able to move, and in order to move to the next area he will have to jump, which is impossible due to the structure created on top.
Against a griefer
Extremely simple design against greedy people. Make a building with a one-block corridor in the center. At the end, place a diamond cube, followed by a red torch. From it, draw a chain of red dust to the sticky pistons that control the floor - they will be in an activated state until the griefer breaks the diamond, and with it the torch - the power source will disappear and the support under your feet will disappear along with it. It is recommended to pour lava from below or make a deep hole if you want to take the victim’s things.
With dynamite
An inconspicuous mechanism that can be used once, after which it becomes unusable. Before iron door dig a hole deeper. Go upstairs and place dynamite inside it and sand on it. Cover everything with a pressure plate supposedly designed to open the door. You can place bait indoors.
Result: the player who steps on the button will trigger the action - the dynamite will explode, the sand will fall down along with the character.
Wall
This is a simple trap that requires 8 pistons and four pressure plates to place in the center and then place our pistons around it. The bottom line is that a player or mob who steps on a button activates a mechanism that creates a wall in front of him. No matter where he goes, he won’t be able to get out. It is important to make a roof here in order to prevent the possibility of jumping over.
Diamond farm
A diamond farm is a type of baited trap. Finished design is a building with diamonds falling from the ceiling. Getting into the funnel located below, through distributors connected together, they go up again. The floor, as in previous examples, is connected to sticky pistons, the walls near the funnel are also - this is done to push the character if he is not standing on the boards.
The pistons and distributors are connected to each other using red dust. Thanks to the comparators, a circuit is created in which, if there is no drop in the system, the energy supply to the floor will disappear - the player takes the diamonds, each Piston returns to its original position, the person falls.
Traps in Minecraft are a “cheat” way of killing another player and taking over his resources, so they are prohibited on decent servers. Although they can be used to kill mobs, they are most often used to eliminate players, as they can provide more loot.
If you are not familiar with these devices and do not know how to make them, then below is a list of the most popular designs, as well as methods for creating them.
Trap based on a sliding block
To make it, you need to have a pressure plate, a piston and one lava bucket in your inventory. This is the simplest design that requires a minimum of resources, but it has a huge drawback - it requires restoration after each use.
Installation process:
- dig a hole in front of the door (three blocks deep);
- pour lava there;
- With right side install the piston;
- on the left side you need to leave space for the block;
close the pit and install the pressure plate.
It works simply: standing on the slab, the player launches the piston, which moves the block to the left and the victim falls down into the hot lava, in which she and all her equipment burn.
Trap based on sliding blocks
To make it, you will need one redstone, one switch, a redstone torch and two sticky pistons.
First of all, we dig a hole into which the player will fall, after which we prepare a place on the left side for redstone and pistons. A torch is installed behind the block with the switch, and the redstone is connected to the pistons.
When the player stands on the blocks, the owner of the house will only have to press the lever, and the victim will fall down. If suddenly some part of the trap creation process is unclear to you, you can watch a video with detailed step-by-step instructions.
Dynamite trap in Minecraft
To make it you need a loose block and dynamite with a pressure plate.
Installation is simple: a hole is dug, dynamite is laid, followed by a loose block, and all this is closed with a pressure plate. It works like this: when the victim approaches the door, an explosion occurs and the character flies down. As a result, he takes damage from both falling and explosions.
The disadvantage of this trap in Minecraft is that the explosion may destroy neighboring blocks. To avoid this, the pit must be lined with obsidian.
Collision Trap
Compound: redstone torch, pressure plate, redstone and 4 sticky pistons.
To make it, you need a hole two blocks wide and as deep as possible. On the left we install pistons that will be closed using blocks. After them there is a door, in front of which there should be a pressure plate. After this, we connect the redstone to the pistons, and to the right of the pit we install 2 pistons, so that when they are turned on, the pit is closed with blocks, and when turned off, it opens.
On next stage construction, you need to pass the signal through the redstone block, install a torch, and connect it to the pistons on the right side. The result will be an active plume and inactive dust.
When constructing such a trap, there will be an empty space on the right in the corridor, which can arouse suspicion and scare away the victim. For greater effect, you need to install an additional 4 pistons and use them, thanks to which the entire wall will move away, and this will not arouse suspicion.
The construction method seems complicated at first glance, but after watching the video, you will quickly understand everything.
Trap chest
It's no secret that it works the moment the victim looks through the contents of the chest, and that's where the whole trick lies. The installation process is also quite simple: we place the chest in such a way that it can only be approached from the front, and dig a hole in front of it.
After this, we install a sticky piston opposite - it should close the hole with a block when active. The next step is to bring the redstone to the piston so that it is constantly in an activated state. To do this, a torch is installed on the block, from which the signal will disappear when the victim activates the chest, and this will deactivate the piston.
How the trap works: the victim approaches the chest in order to search it, but instead of being rewarded, she will fall into the abyss.
Now you know how to build traps. As you can see, everything is very simple. Construction will take a little time and resources.
Build a medieval map, some kind of fortress or something like that in Minecraft? Then we recommend that you study this guide, with which you can make an “arrow room” that is perfect as a trap on your map!
The Arrow Room is one of the simplest traps you can add to your castle or anything else.
Redstone location
The room is divided into two sections: lower and upper. Dispensers should be installed in the upper section, and red dust, torches and repeaters should be installed in the lower section. Every time the player stands on the pressure plate, the redstone signal will be triggered, causing the dispenser to shoot arrows.
Upon receiving the signal, all dispensers on both sides will be immediately activated. This means that the victim (if the player is in survival mode) will have no chance of escaping the trap.
Mechanism of rapid impulse
The mechanism consists of three blocks on which red dust and red torches are placed. When the pressure plate is pressed, the redstone signal travels through the entire red dust grid and turns the mechanism off and on several times, allowing the dispensers to fire arrows multiple times.
Pressure plates
On the solid block you will need to place a pressure plate, and underneath it you will need to place red dust. Since a grid of red dust will be placed throughout the room, which will activate all the dispensers, it will be very difficult for the victim to get out of the trap.
You can also expand the room, thereby making life more difficult for intruders, but be sure to place red dust, pressure plates, and dispensers.
The most important thing you need to remember is that the redstone signal can be transmitted over a distance of 15 blocks, so to eliminate this problem you will need to place repeaters. Below in the screenshot you can see an example of placing two repeaters; you will need to place two more on opposite sides of the room.