DIY foam stork templates. Construction creativity - how to make a stork from polyurethane foam

A well-groomed and landscaped dacha helps create an atmosphere of peace and tranquility. A DIY stork for the garden is an excellent addition to flower beds, flower beds and lawns. This bird is a symbol of happiness, prosperity and prosperity. A stork garden sculpture looks good anywhere. It can be installed on the ground, roof, pole or tree. To make the product more realistic, a technique such as constructing an artificial nest is used.

Stork figurines for the garden bring happiness and blessings, and are also good decoration lawns and flower beds.

Sculpture made from plastic bottles and plywood

It will take several to work plastic bottles black and white. The basis of the structure will be a sheet of waterproof plywood.

To work you will need the following tools and devices:

jigsaw;
scissors;
screwdriver or screwdriver;
pliers;
hammer;
steel staples;
self-tapping screws;
glue gun;
red nail polish;
thick wire.

The stork can be made from plywood and white plastic milk bottles, which are cut into fringes for plumage.

Once the tools and materials are prepared, work can begin.

It is carried out in the following sequence:

A paper template of the bird's body and wings is made. The size of the sculpture is chosen based on the size of the plot and the tastes of its owners.
Markings are applied to the plywood. The workpieces are being cut out.
The edges of the workpieces are polished. The plywood is being primed.
The wings are attached to the stork's body using self-tapping screws. As a rule, the wings are made in a folded position.
The legs are being made. A steel rod with a diameter of 6-10 mm is suitable for this. Using staples, the steel parts are nailed to the plywood. The lower edge of the rod can be sharpened for ease of fastening the product in the ground or nest.
White milk bottles have their bottoms cut off. What remains is cut into 2 parts vertically. The strips are cut with scissors. They will imitate feathers.
Plastic fringe is prepared in a similar way from black bottles.
The cut pieces are attached to a plywood base. This is done from the tail. The black stripes are attached first. They are used to trim the lower body, tail and wings.
The rest of the bird is trimmed with white plastic strips.
The beak is covered with red nail polish.
The eyes are painted with black paint. You can use large buttons or eyes from one of your old toys.

The stork figure is ready. It can be easily attached to any surface. With the onset of inclement weather, it is better to remove the product and store it in a warm room until spring.

Return to contents

Making a stork from foam plastic

As a rule, after external insulation There are quite a lot of styrofoam scraps left on the walls. They do not have to be disposed of. From this material you can make many interesting and beautiful crafts. Polystyrene foam is lightweight and easy to process. You can make a stork from foam plastic quickly, without using complex tools.

To work you will need following materials and tools:

glue;
sharp knife;
steel rod;
wood saw;
pliers;
sandpaper;
black paint;
paint brush.

Making a stork sculpture for the garden is carried out in the following sequence:

Blanks are made from wire that will imitate the legs of a bird. Their lower ends are sharpened. The upper ends of the rod are bent at right angles for fastening in foam.
The contours of the bird's body parts are applied to the foam. The largest piece should be the central part of the torso. The remaining fragments will be needed to give the figure volume, create wings, neck and head.
The blanks are cut out. This is best done with a saw.
On central part the torso is secured with steel rods. In order for subsequent fragments to fit tightly onto the base, grooves are made in it for the rod. To avoid lateral vibrations, the rod is fixed to the base with additional brackets.
Styrofoam strips are glued to the central part of the body, adding volume. Wings are glued on top of them.
The neck and head of the sculpture are placed on the pin.
With a knife and sandpaper The stork figure is given its final shape. Additional finishing is not needed, since a relief imitation of feathers can be created on the foam.
The tail and wings of the bird are painted with black paint. The beak can be wrapped in red insulating tape or paint.

The final stage of needlework is the eyes. They are made from steel bearings or glass balls.

Return to contents

Using polyurethane foam

An unused foam balloon can be successfully used to make a three-dimensional figure of a stork. Using foam, you can quickly make a three-dimensional blank from which to cut out the desired shape.

To work you will need:

plastic bottle with a capacity of 5 l;
scotch;
Styrofoam;
steel rod;
primer;
paint brush;
acrylic paints;
sharp knife;
rasp.

There is a similar set in the pantry of every home. Additional costs not required.

A garden decoration in the form of a stork sculpture is made in the following sequence:

Going to steel frame. For strength, it can be fixed by welding.
A plastic bottle is placed on the frame.
Styrofoam strips are taped to the neck wire. You can grind them to shape in advance and glue them together.
The pins intended for the legs are fitted with thigh parts machined from foam plastic.
The finished frame is moistened with water. Foam is being applied. It covers the entire surface of the workpiece, except for the wire simulating legs.
After the foam hardens, all excess is cut off. Relief is created using a knife and rasp. After finishing, the sculpture is cleaned of sawdust and dust.
The dried product is coated with a primer. Next you need to color the bird acrylic paints. Varnish is applied over the paint.

To make the sculpture more realistic, you can use natural black and white feathers, which are inserted into the tips of the wings and tail.

For reliability, they need to be placed on polyurethane glue.

The finished figure can be installed in the garden on long time. A stork decorated with acrylic paints withstands ultraviolet radiation, cold and moisture.

And your bird can become the founder of a whole bird family in the country. For example, a stork can open a bird gallery, but a homemade flamingo, peacock, heron will continue it... Fantasy is limitless! Some craftsmen simply paint the plywood blank and cover it with varnish. The result is a unique painting on wood, where fantasy images are combined with your own creative abilities.

Your garden will truly become a place of miracles.

What else can you make a stork from?

We list only the most popular options:

car tires(perhaps the most folk version);
forged parts;
plastic lids (but this is jewelry work);
tree;
shells;
disks.

The simplest option is a plywood stork. You simply make a template with your own hands, according to which you cut out the future sculpture. Paint your bird of happiness on both sides with acrylic paints. Or with the ones you have, covering the top of the pattern with construction varnish.

DIY garden decor (video)

A stork in the country can be just the beginning of your creative experiments. As practice shows, appetite comes with eating: even people far from artistic work get the taste, and over time, other interesting characters appear on the site. And this is great, they delight not only the owners, but also the guests, who are becoming more and more numerous in connection with such dacha art.

Reviews and comments

Oksana Vladimirovna 20.12.2015

Interesting idea. But is there enough talent? And I’m also worried that the structure won’t be stable. If you make a body from a plastic bottle, then you will probably need to weigh it down with something. So that the wind doesn't blow it away.

Artem 03/03/2016

I made a pig using a 5-liter plastic bottle, although they are mostly just made from bottles, cutting out the necessary shape, but I still had polyurethane foam and covered the bottle with it. The pig came out fat and looked natural. Only to smooth out the foam in the form of leather, I used gloves and lubricated it with oil, so the foam practically did not stick. Painted the top and it was done.

Sergey 06/14/2016

I do too garden sculptures using plastic bottles, but I prefer to cover them with plaster and give them any necessary shape. Quite easy and the costs are minimal. Then I simply paint it with any paint and the figure is ready.

Igor 02/01/2017

I also want to make a couple of storks :) (I have two adults, but the price is exorbitant) There are pieces of hard foam, but it’s scary to cut - I’m not an artist - I’m an electrician :) 😮 . But I think I’ll decide anyway... I’ll try to provide the result. By the way, the cart wheel was already sculpted from foam plastic...

Add a comment

A decorative stork made of plywood with your own hands will decorate any local area. Playgrounds, summer cottages They look a bit boring without any kind of decoration. A well-groomed flowerbed will attract attention and please the eye even more if you complement it with a fake bird, shown in the photo. There are a lot of variations in making artificial birds, made from all sorts of available materials, which sometimes you can’t even imagine in the form of a craft.

Some animals require special skills and abilities and take up a lot of precious time, so it is better to take on work that is sure to be productive without painstaking efforts. One of these creations is a stork made from plywood by hand.

Why the stork? The answer is quite reasoned. Even small child it is known that this noble bird personifies peace, tranquility, family well-being, fidelity, and constancy. Many beliefs and signs are associated with the location of the stork’s nest, their annual return and offspring.

Where to start making decor

It has been proven and tested in practice that all ingenious inventions are simple and accessible to everyone. So this simple composition is acceptable according to material costs and difficulties for people seeking to embellish and ennoble not only their territory, but also the surrounding space.

You will have to work with plywood. Quite suitable material for those who are trying to master the lessons carpentry. The material is easy to cut, although quite strong and dense. It can be processed without grinder, using sandpaper. After covering with several layers of drying oil or varnish, it is not at all susceptible to swelling, delamination, cracking due to external influence precipitation and temperature changes.

Garden plywood storks are made from medium grades and thickness wood board. It is impossible to exclude the influence of environmental factors, but look for the most expensive and quality plywood for outdoor exposure - an unwise decision. Therefore, it is pointless to describe the characteristics of the material in detail. Whatever they get, a superb creature from the feathered family will be molded from there.

You need to start by roughly imagining actual size birds to know the specific parameters of consumables. There are plywood sheets different sizes, but there is no need to cut out a two-meter bird. If a stork settles in the front garden, then a small bird will fit into this space, perhaps more than one. And if you attach it to the gable of the house, clear example in the photo, it is advisable to make a larger-scale decor so that it is visible from afar and does not get lost.

How can such beauty be lost, even if the color scheme is simple and at the same time bright? Looking ahead a little, we will have to stipulate that the color of the finished stork, cut and assembled with your own hands, includes only three colors: gray, red, black.

Based on the description of the stork for the dacha or garden, you can already make an estimate of materials for its production:

plywood sheet;
paper or finished sketch;
pencil, scissors;
jigsaw;
paint with brush;
ship varnish.

Work sequence

You can cut a stork from plywood in a matter of hours. Sleight of hand and imagination will speed up the process without hindrance. The first step is to draw it. Everyone imagines what a stork looks like, but not everyone will be able to portray it.

The plywood stork drawings in the photo make the first step easier. All that remains is to project them onto a large paper format. As can be seen in the proposed sketch, a pattern, a compass and others technical tools, will not be useful. Anyone can draw two ovals and connect them with smooth lines. Try to depict a bird with a long neck, beak and wings in such a way that the silhouette resembles a representative of the stork order. The better the proportions are maintained relative to the template, the greater the chances of getting something similar to the source.

Next, the drawn silhouette must be cut out. The plywood stork stencil is ready. Even a schoolchild can do all the stages of creating a symbol of devotion and good luck, so the participation of children will not hurt. The paper stork must be placed on a plywood sheet and lightly attached with buttons, a stapler, or tape, whatever comes handy. Trace the outlines with a pencil. The lines must be clear so that when cutting, all the smooth curves of the body and the sharp angles of the beak, tail and wings are preserved. Now you can start cutting. At this stage, there is no need to rush and put strong pressure on the jigsaw. You need to work slowly.

The plywood stork template will be completely ready after careful sanding on all sides. The first sanding is done with coarse sandpaper, after which it is necessary to go through fine-grained sandpaper a couple of times, including cuts. When the surface becomes smooth, without burrs, the most beautiful stage of creating a creation with your own hands begins: assembling all the parts into a single product.

Screwing the legs and gluing the wings is quick and easy. If the stork takes up residence in the garden, it must be placed on a base. Take a small block of wood, drill holes in it, generously coat them with wood glue and insert the legs. It will take a little time for the wings and support to dry. It is advisable to press it with a clamp and fix the wings with the body.

After which it’s time to paint the bird. The most popular and suitable paint is acrylic. The color pattern is shown in the photo: the beak and legs are red (can be dark orange), the body is light gray, the plumage of the tips of the wings and tail is black, the eyes are marked with small black circles. Apply varnish when the paint is dry.

That's the whole procedure! A video with a lesson on how to make a magic bird is attached.

Arrangement of crafts

It’s not enough to make a stork out of plywood. Regardless of the location of the plywood stork, you still need to make a nest for it. It will even resemble the real thing, because it will have to be built from thin branches. On a horizontal surface, the nest should become like a stork's. Just as wide and deep. On the roof gable, the nest can also be imitated. Make it voluminous so that the composition looks complete.

If desired, the stork is given a pair. Then he is not alone. “Producing” miracle birds is inexpensive, so after several training sculptures, you can take on more complex and labor-intensive designs.

A well-groomed and attractive garden will always please the eye. To make your garden more cozy, you can decorate it with various hand-made ones. Today we will talk about how to make a stork for the garden and what materials can be used for this.

Let's start with the simplest thing - PET bottles.

Option #1. Making a stork from plastic bottles

Before you start working, you need to take a small sheet of plywood and make templates from it. Templates need to be made in the form of the body and wings of a bird, as shown in the image. You will also need opaque plastic bottles (preferably white or black), red electrical tape and self-tapping screws. The procedure is as follows.

Step 1. First, you need to connect the previously made templates with each other using self-tapping screws. Plastic milk bottles will be used as feathers. The bottles should be cut into strips of equal width, and then a fringe should be made on the edges of each of them.

Step 2. Next, the finished feathers must be secured to the stork’s “body” using a glue gun. It is typical that black PET bottles will be used for the lower body and tail (usually shampoo containers are used for this).

Step 3. The beak should be wrapped with red insulating tape.

Step 4. To make the legs, ordinary wire is used. Eyes for the bird can be purchased at any craft store. That's it, the stork is ready with your own hands!

Option #2. Making a stork from polyurethane foam

Now let's talk about another option for making a stork for the garden with your own hands. Now you need to pre-prepare plastic container for 5 liters, polyurethane foam, polystyrene foam and tape. The algorithm of actions should be as follows.

Step 1. First, the body parts are attached to the bottle using a container. For the neck, ordinary wire is used, lined with pieces of foam. The thighs need to be made in a similar way (using foam and wire). An ordinary large-diameter nail is quite suitable as a key.

Step 2. The workpiece will look like preliminary stage as shown in the image below.

Step 3. For the bird's legs (at least in this implementation) used electrodes are used. In the absence of electrodes, you can select a similar material - for example, thick wire twisted into several turns, or metal rods from thin reinforcement.

Step 4. So, all parts of the stork’s “body” have been assembled, but before proceeding to the next step, you need to carefully check the strength and reliability of the fasteners.

Step 5. After this, the entire layout must be covered with polyurethane foam.

Step 6. All excess is carefully trimmed off.

Step 7 Now the sculpture is almost ready. If the polyurethane foam has already completely dried, then the bird needs to be painted with acrylic paint.

Step 9 Natural feathers are inserted into the wings and tail to make the stork look as realistic as possible. Look how wonderful garden stork you will succeed (if you do everything right, of course).

Option #3. Making a stork for the garden from a canister

Before you begin, make sure you have the following: Supplies:

· five liter canisters;

· plastic bottles (black and white);

· plastic tubes;

· thick wire;

· foam plastic;

After this, you need to perform the following sequence of actions.

Step 1. Cut out the foam blanks and use a knife to shape the head. Cut out the eye sockets and make the beak flatter.

Step 2. Use sandpaper to make the surface as smooth as possible. Place toy eyes in the eye sockets (we’ve already talked about where you can get them).

Step 3. Cut a beak from a plastic bottle and secure it with glue.

Step 4. From plastic canister make the body of the bird, cut off the handle.

Step 5. Cut a piece of mesh large enough to wrap around the canister. Round the mesh a little so that it looks more like wings.

Step 6. A thick metal rod must be bent and legs made from it.

Step 7 Feathers for the stork are cut from white bottles.

Step 8 After this, you can proceed directly to assembling all the elements. Work should start from the “tail”.

Step 9 For the “neck”, a corrugation (for example, from a vacuum cleaner) or something similar is put on the wire. The feathers are attached using self-tapping screws. Due to the fact that our bird’s wings are folded, feathers can only be attached to the belly and slightly on the sides.

Step 10 White bottles are cut in half, and a fringe is formed at the cut sites. The bottles are attached to the “neck” using tape.

Step 11“Wings” must be made from one edge of the prepared mesh. It is important that the second row covers the first by 1/3. On the third row, white plastic is used.

Step 12 For the “legs” of the stork, appropriate blanks are cut out of 0.5-liter bottles.

Step 13 All that remains is to paint the bird’s “beak” and “legs” red. That's it, your DIY garden stork is ready!

For a more detailed introduction to this manufacturing method, we recommend watching the thematic video material.

Video – DIY stork

It is very easy to make a stork from plastic bottles with your own hands; the master class will allow you to complete this product in a short time. In this case, it is necessary to strictly follow all instructions in order to truly obtain good result. The product can be placed on a personal plot, which will make it possible to decorate the area.

A master class allows you to make a stork yourself, for which you need to use plastic bottles and other available materials. To make the craft look most realistic, you need to make blanks from plywood. Wings and a body are drawn on them. The prepared templates must be carefully cut out.

For work you will need the following materials:

plastic bottles;
insulating tape;
self-tapping screws

It is better to take opaque (white) and dark bottles, and then arrange them, and only red electrical tape will do.

The previously prepared templates need to be combined. For this you will need self-tapping screws. To make feathers, they use white bottles, in which dairy products are usually sold. They need to be cut so that you get strips of the same width. You need to make a lot of shallow cuts along the edges to get the fringe.

The resulting wings are fixed on the body of the bird. To make the fastening as strong as possible, use a glue gun. It must be applied carefully, without leaving traces of glue on the body. To make the tail and the rest of the body, which will be located below, you need to use dark-colored plastic bottles. For example, beer is sold in such containers.

The beak can be obtained from a plastic bottle blank, since the stork has a red beak, the base is wrapped with red electrical tape. The stork also needs legs. To make them, you can use thick wire. For the eyes, take large beads, which are attached to the head with glue. This completes the DIY stork for the garden. It can be placed near a flower bed or on some kind of stand.

Manufacturing details of the second version

To make a talisman bird for your garden with your own hands, you should prepare the following materials and tools:

empty plastic bottles;
2 wooden beams: thick and wide (will serve as the base);
thick aluminum wire (can be a rod) to make lower limbs;
polystyrene foam (thickness 10 cm);
corrugated hose;
plastic canister (2 pcs., capacity 5 l);
metal mesh (under the wings);
stapler

How to make a stork with your own hands? The procedure will take a little time, but the algorithm is simple. On the paths personal plot or a stork will appear in the garden after several hours of execution.

First you need to start making the head and beak of the bird. These parts are cut out of foam plastic. On the surface you can either paint eyes with black paint or glue 2 black buttons (you can use beads).

The beak itself must be cut from a dark plastic bottle. It will consist of 2 parts and is glued to the head. To make the bird's body, you need to cut off the handle from the canister.

Bending tightly around the contour of the canister, bend metal mesh. Remove excess material. You can perform the lower limbs by bending a rod, the ends of which should be secured in wooden block. Plastic feathers are cut from bottles. They are attached to the base of the canister. The tail should be attached first.

You can attach the neck to the stork by attaching wire to the fittings. The next step: put the prepared hose on the wire. Since the feathers on the neck should be small, they are attached with tape. The feathers along the body are fixed on a metal mesh.

Since the bird in the garden will be in an upright position, its wings will be folded. They must be secured with a stapler. The feathers should be positioned so that the details of each subsequent row overlap 1/3 of the previous row. This will give the craft a natural look and feel.

The master class ends with fastening the individual elements. To give the product maximum attractiveness, you can perform decorative tint on the beak, eyes, and legs. The craft can stand outside throughout the summer and is not afraid of bad weather.

Alternative product

An original do-it-yourself stork for the garden can be supplemented with a baby in the nest. Implementing this option will help make your home happy and bring prosperity and well-being to your home. To make a stork sitting in a nest, patterns from the Tilda bird are used as a basis. This is a fairly modern and fashionable homemade fabric toy today. The patterns for it are simple.

Individual elements of the craft are cut out of dense and durable fabric. The parts are sewn together with thread. To give the body volume, it needs to be stuffed with any filler, so there is no need to completely sew the bird together right away. The filler can be burlap, sawdust, straw, feathers, unnecessary scraps, etc. After completing the filling stage, the hole is completely sewn up.

The beak is made separately. To create it you will need durable red cardboard. The finished part is attached to an already made head. You can sew clothes. To do this, you need to take measurements from the finished bird. At the final stage, the eyes are glued on, the baby is wrapped in a light cloth and placed next to the mother.

If you install a craft on the branches of trees in the garden, when it rains, you need to remove it from there so that appearance the product has not deteriorated. This bird is also placed on window sills; it will harmonize perfectly with indoor flowers.

Based on the fabric stork, the feathers are obtained from white plastic bottles in which milk or other dairy products are sold. They are fastened together. Eventually the wings come out.

Unusual option

The master class on making a stork, which is based on a large plastic bottle with a volume of 6 liters, is worthy of attention. To make the head, you need to use foam, which will need to be carefully cut out. Don't forget about the shape of the beak and eyes. Black pebbles can act as eyes and are fixed with glue.

The beak can be made from an ordinary plastic bottle. It also sticks to the head. A large plastic bottle will act as the body. You need to cut off the neck of it. Special metal mesh - wings. If the bird's wings are bent, it is necessary to make appropriate bends on the mesh.

The legs are made of wire, which is folded in several layers. Feathers will be from plastic bottles light shade. They are cut so that individual feathers look realistic. Fixation is done using wire to the wings themselves.

To make the neck look voluminous, the bottles need to be finely chopped to create a fringe. They are arranged in rows. Small bottles are placed on the paws, which are also cut at the base. If the fixation of parts seems weak, then the fastening process can be carried out using self-tapping screws.

Making a stork is not a very long and difficult undertaking. To bring your idea to life, you can use the recommendations provided. However, you can make certain adjustments to the idea that will allow you to create a unique and original product.