K flex solar ht technical specifications. Prices for K-FLEX SOLAR HT

Thermal insulation for pipes K-FLEX SOLAR HT- thermal insulation made of foam rubber

K-FLEX SOLAR HT (K-FLEX SOLAR) is a high-temperature thermal insulation material made of foam rubber with a closed porous structure. Thermal insulation K-FLEX SOLAR HT is made from synthetic butadiene-acrinitrile rubber followed by foaming. Thermal insulation K-FLEX SOLAR is produced in black, in the form flexible tubes 2 m long and sheets in rolls 1 m wide. K-FLEX SOLAR HT tubes are available in diameters from 6 mm to 89 mm and thicknesses: 9, 13, 19, 25 and 32 mm, and K-FLEX SOLAR HT sheets are available in thicknesses: 10, 13, 16, 19, 25, 32 and 40 mm.

Application of thermal insulation for pipes K-FLEX SOLAR HT

Thermal insulation K-FLEX SOLAR HT is a special high-temperature insulation, which is intended for engineering systems with coolant temperatures up to +150°C. Pipe insulation K-FLEX SOLAR HT is used in steam lines low pressure up to 175°C, in pipelines of steam, boiler and industrial equipment, as well as in hot water supply and heating systems. Thermal insulation K-FLEX SOLAR is used for pipe insulation to prevent heat losses, condensation, corrosion of pipes, as well as their sound insulation.

K-FLEX SOLAR HT high temperature insulation does not require special Maintenance, and during its installation no protective equipment or protective clothing is needed, since K-FLEX SOLAR does not crumble and does not emit dust. K-FLEX SOLAR HT tubes are installed on unmounted pipes using the tension method, and on installed pipelines using the longitudinal cutting of the tubes.

Advantages of thermal insulation for K-FLEX SOLAR pipes

Thermal insulation K-FLEX SOLAR is distinguished by unchanged technical characteristics with a long service life, and due to its high operational characteristics can be used for pipe insulation technological equipment configurations of any complexity. SOLAR HT guarantees protection against corrosion of pipes and equipment under insulation. K-FLEX SOLAR HT is an environmentally friendly material, does not contain halogenated and fluorinated hydrocarbons CFC and HСFC, and also does not contain asbestos. Pipe insulation K-FLEX SOLAR HT has everything Required documents quality: certificate fire safety, sanitary-epidemiological conclusion and certificate of conformity.

Thermal insulation properties for K-FLEX SOLAR HT pipes

• has low thermal conductivity
• has a high resistance factor to water vapor diffusion
• has high vapor and water resistance
• is highly resistant to aggressive and chemical environments
• is highly resistant to microorganisms and mold
• has high resistance to atmospheric influences
• UV resistant
• characterized by high fire resistance and low toxicity of combustion products

Technical characteristics of thermal insulation K-FLEX SOLAR HT (K-FLEX SOLAR)

K-FLEX SOLAR NT- it is functional and quality solution For industrial pipelines up to +150°C and solar energy.

This is a high-temperature thermal insulation material made of foam rubber with a closed porous structure. Thermal insulation K-FLEX SOLAR HT is made from synthetic butadiene-acrinitrile rubber followed by foaming. K-FLEX SOLAR HT is produced in black color, in the form of flexible tubes 2 m long and sheets in rolls 1 m wide. K-FLEX SOLAR HT tubes are available in diameters from 6 mm to 89 mm and thicknesses: 9, 13, 19, 25 and 32 mm, and K-FLEX SOLAR HT sheets are available in thicknesses: 10, 13, 16, 19, 25, 32 and 40 mm
This is a special high-temperature insulation, which is intended for insulating pipelines in engineering systems with coolant temperatures up to +150°C. Thermal insulation K-FLEX SOLAR HT is used in low pressure steam pipelines up to 175°C, in pipelines of steam, boiler and industrial equipment, as well as in hot water supply and heating systems. Thermal insulation K-FLEX SOLAR HT is used for pipe insulation to prevent heat loss, condensation, pipe corrosion, as well as noise insulation.

It has low thermal conductivity, high resistance to water vapor diffusion, low water absorption, the ability to self-extinguish in case of fire, as well as resistance to decomposition and microorganisms. The material is safe, does not contain halogens, CFCs, HCFCs and asbestos.

Range

Pipes with wall thickness from 13 to 32 mm and internal diameter from 10 to 114 mm. The length of the pipes is 2 meters.

Pipe material with a ready-made longitudinal section and a self-adhesive seam for rapid, reliable installation with minimal use of glue, with a wall thickness of 13 to 19 mm and an internal diameter of 10 to 114 mm. Length - 2 meters.

Sheets in rolls (1 meter wide) with a layer thickness from 10 to 32 mm.

• Solar HT tubes price from 13 rub.
• Submit your application: info@site
• The product is in stock, you can buy k-flex solar ht as soon as possible.

K-FLEX SOLAR HT technical specifications

New thermal insulation materials are confidently replacing conventional fiberglass and mineral wool coatings from all areas of use. This is determined not only by a significantly longer service life, but also by other characteristics. Synthetic thermal insulation materials:

• much lighter;
• easier to install;
• are not afraid of moisture;
• chemically inert;
• safe during installation and operation.

One of the new innovative materials that our company offers is K-Flex Solar NT insulation, created on the basis of synthetic rubbers. Our company provides the most favorable price for K-Flex Solar HT, thanks to direct deliveries from the factory.

This is a universal coating that works well at temperatures from - 200 to + 150 0C, maintaining in this temperature range not only elasticity and all the basic properties of the structure, but also the main thermal insulation indicators. The peculiarity of the material makes it most advantageous for insulating high-temperature systems operating at positive temperatures. It is in the range of 0…+ 150 0C that the thermal insulation and vapor barrier properties are best manifested.

The raw material for the production of K-Flex Solar is artificial butadiene-acrinitrile rubber, which foams during processing and forms light cellular structure with closed cavities inside filled with air and inert gases. This determines the low weight of 1 m3 of material - within 75 kg and low vapor permeability and moisture absorption (resistance to water vapor penetration 4,000, thermal conductivity - below 0.042 W / (m. ° C) according to GOST 7076).

In terms of fire safety, K-Flex Solar HT belongs to materials of group G1 according to SNiP 21-01-97. The material practically does not burn and goes out in the absence of external sources open flame. But in rooms with high requirements for the release of toxic substances in case of fire, it is not recommended to use thermal insulation based on rubber.

Scope of application

K-Flex Solar NT is intended for thermal insulation of thermal engineering and plumbing systems with coolant temperature up to + 150 0C. It is very convenient to use it in solar energy systems, this is indicated in the name - Solar. Rolls and tubes are used for:

• protection of pipelines with water, steam and other coolants;
• insulation of pumping system components;
• protection of heat-generating equipment from heat release into the atmosphere;
• insulation of external and internal parts high-temperature networks from contact with personnel.

Insulation can be installed in any production premises and the residential sector - when heated, the release of toxic and allergenic substances is zero.

* - short-term

Roll Solar HT

The material is produced in the form of tubes with a diameter of 6 - 89 mm (2 m long) and rolls 1 m wide. K Flex Solar HT rolls cover an area from 4 to 20 m2, depending on the sheet thickness (10, 13, 19, 25, 32 , 40, 50 mm). To simplify installation and seal joints, you can also buy a special mounting tape developed by the manufacturer specifically for the Solar HT series.

Package

• The tube boxes are 2 meters long. Box parameters: 2092 mm x 387 mm x 324 mm. The volume of the box is 0.27 (m3).
• Rolls are packed in plastic bags. Height 1.06 meters. Volume 0.3 (m3).