How to make a lampshade (plafond) at home. DIY shades for chandeliers: original ideas and decorating workshops Making a lampshade for a table lamp

Lighting plays important role in the house. A well-chosen light source is a combination of the correct brightness and power with beautiful design lamp Good decision will become a chandelier, floor lamp or lamp under a lampshade. But if neither the stylization of the last century nor a modern product is suitable for the interior, you can make a lampshade with your own hands!

Popular materials

Interior elements made according to individual project, are conveniently and beautifully integrated into the home environment. They are made from those materials and in those colors that are combined with the design of the rooms and are key to a particular style direction.

But appearance- That's not all. Any product must not only match the interior, but also perform its functions. Before learning how to make a lampshade with your own hands, it is important to determine what to make it from. The choice of materials is influenced by the following nuances:

• Lampshade location. Several options are common: ceiling lamps, floor lamps on a high leg, wall-mounted, table lamps. It is difficult to imagine on a bedside table the same dimensional structure as under the ceiling. In turn, a small bedside lamp will not cope with the functions of a chandelier in the living room.

• Dimensions. The larger the diameter of the lampshade, the more difficult it is to make it from small elements. If you only need a meter of material for a fabric lampshade, then for a shade made of ice cream sticks you will have to eat more than a dozen popsicles.

• Purpose. Lampshades are suitable for many occasions. They create a romantic setting for a date, a cozy intimate setting for friendly conversations, and add zest and lightness to the interior. The more light a room requires, the thinner and lighter the materials should be; the darker the lighting is planned, the denser the materials and the more saturated the colors.

• Price. Not all materials will be cheaper than purchasing a ready-made lampshade. Thus, lace, velvet, and some other noble fabrics are many times higher than the cost of a product made from scrap materials.

Lampshades made of fabrics, leather, various types of paper, fragments of wood, ropes and ribbons, beads, and metal are very popular. No less common are products from “junk” items and “alterations” that have received a new life.

Textile

Not every fabric is suitable for sewing a lampshade. Conventionally, it can be divided into two types: transparent and dense.

Transparent is intended for chandeliers and floor lamps that should illuminate large area. This fabric allows you to create beautiful designer lampshades without compromising the technical characteristics of the lighting. Light veils, airy items made of thin lace, and “knitted” openwork lampshades are suitable.

Transparent fabrics should be kept at a great distance from incandescent lamps, and lace fabrics should preferably be starched so that they retain their rigid shape even without a frame.

Thick fabrics needed to create a chamber atmosphere. These include satin, jacquard, linen, matting, flock, silk, staple, fabrics with photo printing. There is also a fabric on a lighting canvas intended exclusively for lampshades of geometric shapes.

Thick fabrics are more variable in terms of design. They come in any desired shades and can have patterns: geometric patterns, different kinds cells, plots, birds and animals, floral and plant motifs. Separately, it is worth noting leather products, corrugated fabrics and the possibility of using adhesive tapes and ribbons to form folds of any shape.

Repurposing old things will help you save on creating an original fabric lampshade. You can use holey jeans that you didn’t dare throw away, a sweater that moths have eaten, pieces of burlap and any worn-out clothing.

Tree

In the design of lamps, the base is often made of wood, while the lampshade requires less heavy materials. However, this does not prevent the use of small, light wooden parts non-trivial shape to create a lampshade.

These can be wicker products made from strips of wood (like a basket or box), flexible thin branches (willow, hazel, birch), thin wood cuts with a diameter of up to 10 centimeters, strung on ropes like curtains for a doorway. A lampshade looks more original, the frame of which is made from an old trash can, and the shade is decorated with even rows of wooden clothespins. Budget options include a lamp decoration made from sushi sticks or a simple and elegant lampshade made from a knitting hoop.

Solid wooden lampshades are also found on the market. These are the thinnest cylinders that retain the texture of wood and transmit light, but they are difficult to manufacture and require some carpentry skills. In addition, due to the material and production technology, they are highly expensive.

Metal

When many people hear the phrase “metal lampshade,” they conjure up associations with bulky candelabra under the ceiling made of gothic interiors, however, modern technologies make it possible to produce elegant and laconic products from aluminum and metals with similar properties. They have a variety of shapes, dome depths, and can be solid or consisting of only “ribs,” like a bare frame.

You can easily make a budget option with your own hands from wire (aluminum or copper). Aluminum is larger in diameter, suitable for products of fancy shapes, but without decorative elements. Copper wire is thinner and more flexible. It produces not only intricate lampshades, but also beautiful decor any degree of complexity. Ready product wire can be painted entirely or in separate fragments.

To give the wire the desired shape, use a small bucket, a salad bowl on a leg, a shaped vase, a fruit basket, or any other item that can be wrapped around the top and then removed.

Another option for home creativity- lampshade made of coins. If you have old money from the Soviet era at home, then these depreciated rubles can be turned into an original lampshade if you glue them together with edges using superglue. Metal circles of different sizes should form a deep bowl into which the light bulb will fit.

It is important to consider that this is painstaking work, and you will need a lot of coins even for a small product, so you should not choose this option for decorating a chandelier in the living room. But it will be very useful as a decorative decoration for a table.

Gypsum

Plaster lampshades are a rare occurrence. Semicircular and figured sconce lampshades are more often used in interiors in a historical, especially antique, style.

It’s not difficult to make it yourself. All you need is gypsum mixture, water, a medical bandage and the base on which the future lampshade will be formed. The work is carried out using the papier-mâché technique, only instead of pieces of paper, small fragments of bandages soaked in a plaster mixture are used.

After drying, the plaster product will be textured and uneven. It can be left like this or sanded with fine sandpaper until smooth.

Plastic

Finished plastic products amaze with a variety of shapes, sizes and colors. No fewer original plastic lampshades can be made with your own hands, using household items from this material. Among the popular ones are products made from bottles, cups, disposable spoons and straws. The most convenient are large-capacity drinking bottles.

Colored plastic is used to cut out small parts. For example, you can make leaves, circles, ovals, diamonds, and then attach them to the frame. Transparent plastic serves as a basis for painting with acrylic and stained glass paints.

Bottles of 5 liters or more produce a finished lampshade if you cut off the bottom part of the container. The remaining top already has a hole for the cartridge, and the lower edge can be cut off, set on fire (heated plastic takes on bizarre shapes), and trimmed with another material. All that remains is to apply the drawing.

Paper

Paper lampshades are one of the cheapest, most convenient and easiest to make. They are lightweight and versatile. As with textiles, they can be more transparent or dense.

Lightweight and transmitting a lot of light, such lampshades are made of parchment or rice paper. Before cutting out the parts, the sheets must be smoothed with an iron. Thick lampshades can be made from cardboard, wallpaper, newspaper pages using the papier-mâché technique.

Threads

The most popular and simple option is a product made from threads (twine, sisal, twine, jute), which are soaked in a large amount of PVA glue and wrapped around balloon or an inflatable ball. Due to the fact that when the glue dries, it becomes transparent, there will be no marks left on the threads, even colored ones.

A rougher-looking and more complex lampshade is made from braided clothesline or rope. It will not be possible to give it a round shape, but a classic semicircular, cone-shaped or cylindrical lampshade will be ideal for rooms in nautical style and loft interiors. Wicker lampshades made of wicker, twine, and macrame technique also look interesting.

Available materials

With good imagination and skillful hands, you can make a lampshade from less pliable materials: beads, seed beads, scraps of satin ribbons, used disks, shells, book sheets or unnecessary music notebooks, corrugated cardboard, cupcake tins and many other little things that are no longer used.

Style direction

Choosing a specific style direction for interior design requires adhering to it even in the smallest details:

• If the interior is dominated by one of the classic trends, it is worth giving preference quality materials and noble shades. Suitable fabrics, lace, bronze, gold and silver elements, elegant shapes, white, beige, burgundy, emerald, brown colors, as well as ivory and wood shades valuable species. A lampshade that looks as if it was inherited from an intelligent great-grandmother will look especially advantageous.

• Ethnic design implies the presence of the national flavor of a particular country. European styles tend towards primness and elegance, the Asian region is more characterized by lightness, airiness, simplicity, oriental style embodies fairy-tale motifs, bright colors, precious jewelry, combination large quantity shades.

• Russian style, contrary to ideas, this is not a heap national symbols, but wealth, solidity, beauty and good quality; American - freedom of expression and original materials, for example, a lampshade made from tabloid pages.

• Styles, close to nature, favor natural and simple materials– wood, straw, coarse threads.

• Modern directions free from restrictions as much as possible. They allow the use of absolutely any materials, waste items and the most unexpected decisions: Lampshades made from rope, candy wrappers, used mirrored discs, paper cups and cocktail straws. And these are just a few variations on the theme.

Master class on making

At first sight, self-production lampshade may not seem like an easy task, but a detailed description will help you figure it out in a few simple steps. The easiest ones to make include frameless products made of paper, twine, and lace.

To assemble a paper accordion lampshade for a chandelier, floor lamp or table lamp, you will need:

• Prepare a piece of paper (or wallpaper) 150 cm long and at least 30 cm wide;
• Using a simple pencil along a ruler, outline the “edges” of the accordion, 3 or 5 cm long;
• Assemble the accordion, focusing on the outlined lines;
• Using a hole punch, make holes in the lampshade along the upper edge and insert a ribbon or string into them to adjust the width of the upper edge of the lampshade;
• Glue the two ends of the accordion with superglue.

To create the most popular lampshade spherical different shapes You will need: 20-25 meters of cotton-linen thread (thick) or soft rope, scissors, PVA construction glue, water, a container for glue, a marker, a thick one-color inflatable balloon, medical gloves, Vaseline, a base for a lamp.

Actions are performed in stages:

• Prepare your work surface. It is most convenient to perform actions on a table covered with film;
• Dilute glue with water in a ratio of 2 to 1, and lower a ball of thread into the resulting solution. It should be thoroughly wet. If necessary, you can add more solution during operation;
• While the threads absorb the glue, inflate the ball to the desired size, mark a circle around the tail of the ball with a marker, the diameter of which is equal to the diameter of the light bulb. Lightly brush the ball with Vaseline;

• Tie the tail of the ball with a thread and wrap it in a chaotic manner until the threads run out. It is desirable that the weaving be thin and cobwebby;
• When the weaving is finished, the tip of the thread must again be secured around the tail of the ball and the excess must be cut off;
• Hang the ball in a dry place for 48 hours until completely dry. It is important to take into account that glue will drip from it, so there should be a container at the bottom.
• Puncture or deflate the balloon and remove it from the lampshade. The product is ready.

Lampshades made from round lace doilies look incredibly beautiful. They add sophistication and romanticism to the room, and at the same time are very simple to implement.

Since the basis of lace is thread, the manufacturing technology is similar to the previous version:

• Prepare workplace and everything you need: scissors, white glue without yellowing or transparent, lace or lace napkins, water, a contrasting inflatable ball without a pattern;
• Dilute glue with water, immerse napkins for decoration in the mixture;

• Inflate the balloon, mark the hole for the light bulb, grease the surface of the balloon with Vaseline;
• Lay out the lace circles overlapping, moving clockwise from the intended hole for the light bulb;
• Leave for 24-48 hours to dry completely;
• Secure the socket and lamp.

Frameless lampshades also include products made from metal, plastic and wooden fragments that are glued together to form a semicircular or round lampshade. For example, from coins, gears, cups, branches.

A frame is necessary for more complex products made from thin paper or fabric. It allows you to assemble lampshades of different shapes, sizes and complexity.

How to make a frame?

The base from an old lampshade is ideal for realizing your ideas.

If it is not there, you can make a new one from the following materials:

1. Wire.
2. Metal hangers for clothes.
3. Plastic containers for drinks.
4. Plastic and wicker baskets.
5. Embroidery hoop.

The wire frame is the most labor-intensive, but the product made from it is reliable and strong. The main advantage of the wire is that it allows you to give the base any shape: cone, cylinder, square, tetrahedron.

For assembly you need steel wire 2-3 mm thick, wire cutters, pliers (pliers), round nose pliers, hammer, wooden block, sandpaper, enamel for painting, soldering iron.

Progress:

• Straighten the wire on a wooden block using a hammer.
• Cut the wire into pieces in accordance with the diameter of the upper and lower rings and the height of the “ribs” of the frame.
• Clean the finished fragments from unevenness and rust with sandpaper; Using pliers and pliers, give them the desired shape. The classic frame consists of two round bases of different diameters and 4-6 ribs.
• Cut the ends of the base blank at an angle and set them aside.
• At the upper end of each piece of wire for making ribs, make a small buttonhole and thread them into the upper ring of the frame. Distribute evenly.
• Wrap the ends of the wire on the upper ring and the junction of the base with the ribs with thin copper wire, press with pliers and solder.
• Use pliers to bend the loops at the lower ends of the ribs, place the bottom ring of the base on them, adjust the distance, press with pliers, wrap with wire, press again with pliers and solder.
• Cover the finished frame with light-colored enamel so that after a while the wire does not begin to darken and leave dirty stains on the fabric lampshade.

A frame made from old metal coat hangers is assembled according to the same principle as a wire one, but requires less effort and is less durable.

To make it, you need to untwist the hangers into long wire strips, from which parts of the desired shape and size are formed using pliers and round nose pliers. You can bite off the excess with wire cutters. The parts are connected to each other using construction adhesive, thin wire or electrical tape.

Empty plastic bottles with a volume of 5 liters or more can also serve as a good base for a lampshade if you remove the lid and cut off the bottom. The resulting lampshade can be painted, painted, and decorated with plastic parts.

Three-kopeck plastic baskets for used paper and outdated wicker baskets provide great scope for imagination. They are almost ready to be used as a lampshade; all that remains is to make a hole in the bottom for a light bulb, and if you use your imagination and decorate them, no one will recognize yesterday’s trash can in the luxurious floor lamp.

The last type of frame is also based on the application a familiar object in an unusual way. To make a simple and convenient wooden base, you only need embroidery hoops of different diameters. The rings are connected to each other using a rope, braid or cord using any convenient knot or through holes drilled around the perimeter. You can arrange them by size in ascending order for floor lamps and in descending order for ceiling chandeliers.

How to sew from fabric?

To sew a classic fabric lampshade in the shape of a cylinder, you will need a pattern, textiles, upper and lower frame rings, PVC film for lampshades or white cotton, textiles and a spool of thread in color, a sewing machine, iron, glue, scissors, clothespins, a wet wipe, weights .

Step-by-step instruction How to reupholster an old lampshade with new fabric or cover a new frame with a cover includes several steps:

• Preparation of the workplace.
• Creating a pattern drawing. It is enough to measure a cylindrical lampshade with a centimeter tape, and a conical one needs to be “rolled” over a sheet of paper to draw a pattern. Having marked the beginning, it is applied to the line on the paper so that it coincides with the mark, and rolled along the sheet, marking a new point at the top and bottom every 3-5 centimeters until the “beginning” mark touches the paper again. A second line is drawn at this point. To the finished drawing you need to add 2-4 cm along the edges, then transfer the pattern to fabric and PVC film. Cut out the part on the film.

• Pasting film onto fabric. It should exactly match the drawing, plus allowances of 3-4 cm from each edge. Now you can cut.
• Assembly. There are two options: sew or glue the cover to the base. The second one is much faster and simpler, so most people prefer it. Assembly begins by securing the lampshade to the top and bottom rings using clothespins or clips. It is important to maintain a uniform distance from the edge so that the fabric adheres well to the base. If the lampshade is fastened correctly, you need to mark the top and bottom edges, and the place where the seam joins at least two points.

• "Stitching." Remove the clothespins, unfold the lampshade, and place it face down on the work surface. Then connect at the marked points and glue with superglue. Afterwards, the product must be turned over and weights placed on the seam so that the glue sets well.
• Edge processing. This is where the allowances left at the beginning will come in handy. They are treated with glue, and then folded inward, around the base ring, and secured with clamps. This must be done alternately with the upper and lower rings.

How to update an old lamp at home?

Restoring an old lampshade will not take much time, and the result will please all the inhabitants of the house. There are a great many variations on the theme: an old children's lamp with cartoon characters can be reupholstered with new fabric and an inscription or patterns can be applied with a spray can through a stencil; a starry sky can be made with backlight in the bedroom, and a floor lamp in the living room can be decorated with butterflies.

For decoration in the kitchen, decorating with colored paste is suitable. interesting shapes(bows, shells, spirals). Decoration with lace napkins looks original, metal elements in steampunk style, paper flowers.

The decoupage technique using beautiful designs on napkins and special compositions for transferring them to fabric can save an old lampshade. Antique products are created using the same technique.

If the house has gone through global changes, the lamp should also be transformed to match the new style. Romantic light shades, floral prints, straw braids and lace frills will be appropriate in the Provence style, industrial themes will support modern interior, chrome-plated surfaces and sharp shapes will fit perfectly into minimalism, techno and hi-tech, lavishly decorated with beads, pearls, beads, ribbon and lace, lampshades will find their place in historical interiors, and paper, bamboo, jute and other natural materials will appeal to lovers national colors.

Stylish and beautiful ideas for homemade ceiling, floor and tabletop models

Designing an unusual lampshade with your own hands is one of those situations when treasures from the mezzanine and old things from the balcony can find a second life. Thus, colored scraps of fabric and jewelry can turn into a boho lampshade, and rough materials, metal and glass - into decoration for a loft-style interior.

A beautiful ceiling lampshade in the living room or bedroom can be made from lace, paper, large beads, or decorate the cotton base with fabric flowers. The kitchen theme will be supported by lamps made from old utensils, wine corks, cocktail straws, spoons, and bottles. In the nursery, you can make lampshades from halves of a globe, use wallpaper with stars to frame a night light, and decorate the room with bright small lamps in a fairy-tale oriental style.

When starting to arrange the interior space, it is important to think through every little detail. After all, we all subconsciously strive for comfort and it is the smallest details that can create a special atmosphere, convey the general idea, mood and character of the room. Professional designers claim, and interiors clearly prove, that right choice Chandeliers can not only decorate the interior of a room, but also make life brighter and more fun. Beautiful lampshades for chandeliers with an original design give special grace and luster to the lamps. You can find out how to make them yourself and what materials are best to use for this in this article. Detailed, step-by-step master class, as well as visual photo, will be an excellent help for you in this exciting process.

Material selection

When making a chandelier, it is difficult to single out one material that would meet all the requirements. Each of them has its own individual characteristics and features. For example, paper, which is the simplest and available material, lends itself well to transformation.

Lamps made from glass shards and strips of metal have a dazzling shine and beautiful appearance. Wood and fabric add warmth and comfort to the interior. Lace lampshades are distinguished by their special beauty, captivating everyone at first sight.

In a word, you can make a chandelier with your own hands from anything, the main thing is to be smart and use your imagination in time.

Chandelier from paper napkins- a rather bold but justified experiment

We will describe in detail how in an ordinary object you can discern its creative potential to create an exclusive decorative element in this article.

Step-by-step instructions, with a description of each step, will help you make from available materials incredibly beautiful and unique lamps that will be an excellent addition to your favorite interior.

What you need to pay attention to before making a chandelier

Many people are interested in how to properly make a chandelier in and other rooms. After all, you want this element of the interior to be not only beautiful, but also functional.

On the one hand, a chandelier is a lighting device that can provide proper level lighting in the apartment. After all, a lot depends on the choice of light in the room, including eye safety. On the other hand, I want the ceiling structure to complement the interior design, creating a special atmosphere of warmth and comfort.

When making a chandelier, first of all you need to take into account the height of the ceiling. For example, for low people a chandelier with a bar mount is suitable. So, the ceiling will look visually higher. If the ceilings are high - 3 m or higher, then it is better to opt for a pendant lamp with a hook mount.

Lamp selection

For any room you need to take an individual approach to the intensity of its lighting.

For a small bathroom you will need 80-100 W.
Kitchens require a lamp power of at least 120-150 W.
The living room and hall cannot do without light bulbs in the range of 150-300 W.

The number and power of lamps is calculated based on established standards - 20 W are required per 1 m². electricity. It is also necessary to take into account the parameters of the room, its dimensions and reflective properties.

Designer Edison lamps - look beautiful and unusual

Design of the lampshade

The appearance, decor and design of the lampshade occupies important place in the design of a chandelier. It is selected to match the interior of the room, depending on the style. Crystal for classics, metal and glass for, wood will fit perfectly into country or chalet style, fabric and silk are perfect for Provence style.

To illuminate a room on several levels, you can additionally make wall sconces or floor lamps.

Step-by-step master class on making

To make a beautiful ceiling decoration, you don't have to start from scratch. Look around, you probably have something in your house that you haven’t used for a long time. And who knows, maybe it will become the main item in the manufacture of the original lamp. Moreover, there are now more than enough ideas and inspiration for creativity on the Internet.

Important! The best place to start searching for the things you need is in the kitchen or balcony. It is there that we store all sorts of rubbish that we once needed so much and which, as often happens, is so difficult to part with later.

Spectacular chandelier made from mugs

No matter how strange it may sound, it is from dishes and other kitchen utensils that the most unusual and interesting models lamps. For example, tea mugs are an ideal material to make a spectacular lamp.

For work we will need:

• Mugs
• Saucers
• Drill
• Porcelain drill with special hole

We make it quickly and easily

1. In the bottom of the mug, use a drill to make a small hole for the wire, attach the electric cartridge and bring the wire out. It is advisable to seal the hole with a plaster mixture.
2. Next, you need to glue the mug to the saucer, where there should also be a hole, insert a light bulb and hang the newly made lamp in the right place.

As you can see the original and fashion design can be obtained from completely ordinary items.

Mesmerizing yarn chandelier

Since this is quite a simple product, to make it we need a minimum of things, namely:

• Wire with a cross section of 4-5 mm.
• Wire cutters
• Thin thread
• Multi-colored yarn

Manufacturing instructions:

1. A ring is made from wire, the diameter of which will correspond to the future size of our chandelier. To get a perfectly even circle, it can be wound on some object that has a cylindrical shape.
2. We bite off the excess wire with wire cutters, leaving a reserve of 2-3 cm on each side. We tie the ends with a thin thread.
3. All that remains is to decorate our chandelier beautifully and brightly. To do this, we cut the yarn threads so that the length of each segment is twice the height of the lampshade.
4. One by one, we tie the resulting strings onto a knot until we hang them all over the ring. From the same yarn we make a fastening for the hook.

This lampshade can be used both as a chandelier and as a decorative element decorating the interior of the room.

By combining the skills of macrame and papier-mâché you can get stylish chandelier for the bedroom

Important! To make such a lamp, instead of wool yarn, you can use any other thread. The main thing is that it harmoniously fits into your interior.

Unusual lamp made from a teapot

You will learn how to make a chandelier from an ordinary teapot yourself in this master class. Here's what we need for this handmade masterpiece:

• Kettle
• The wire
• Electrochuck
• Metal chain

Step-by-step manufacturing guide

1. First of all, the lower part of the teapot is cut out. This is done in such a way that the resulting cutting edge is not sharp, otherwise you could get hurt on it.
2. Next, an electric cartridge is fixed to the lid of the kettle, the wire of which is led out through a small hole drilled at the top.
3. A chain is attached to the handle of the kettle, and a wire is threaded through the links. The lamp is ready.

Let's breathe new life into bottles

Glass bottles, especially if they have beautiful shapes, can be used to make a wonderful chandelier. Required material:

• Thin rope
• Flammable liquid (alcohol or gasoline)
• Glass bottles (preferably colored)
• Edison lamps (having a beautiful spiral)
• Wire and electric cartridge

Do it yourself

1. We wrap a rope around the bottom of the bottle, after wetting it in flammable liquid. Then we set it on fire and let it burst, and we begin to slowly rotate the bottle around its axis until the rope burns out completely. After this, we lower the bottle into a container with cold water, wrap it in a towel and, with a little effort, break off the bottom.
2. To cut edge was not sharp, it needs to be polished. To do this, it will be enough to swirl the bottle in sand or fine gravel for a couple of minutes.
3. All that remains is to mount the electric socket correctly, stick the wire through the neck, and screw in the light bulb. From the remaining bottles, the remaining lampshades are made in a similar way.

This chandelier will fit perfectly into any interior, especially if you hang it above the bar counter.

Decor from cans

Lamps made from cans are no less beautiful. They are made in the same way as from bottles. The only difference is that the bottom of the jar does not need to be cut off, since clear glass is usually used for lampshades.

We need:

• Beautiful thick-walled jars (preferably with a relief pattern)
• Hammer and nails
• Wire, electric socket
• Spray paint
• Edison lamp

How to do it right

1. To begin with, using a nail and a hammer, holes are punched in a circle in the lid, after which the inside is carefully squeezed out. The diameter of the circle must correspond to the diameter of the base in the cartridge.
2. We insert the cartridge into the cover and mount the wire.
3. Next, we paint the lid together with the cartridge in the color of our choice. Metallic paint with a golden shimmer will look best.
4. All that remains is to screw in the light bulb, close the lid and install the lamp in its proper place.

We all know what a globe is, but not everyone knows what amazing things can be made from it. For example, a cute lampshade for a chandelier that will fit perfectly into the interior of a children's room.

Here's everything we need:

• globe
• Bulb
• Electric chuck with holding element

Step-by-step master class

1. Usually the globe structure is not solid, so in order for us to get required element, it is necessary to divide it into equal two parts (hemispheres).
2. Next, at the top point of the hemisphere, you need to make a hole for the cartridge. For this, it is best to use a drill with a crown.
3. The electric cartridge is installed in place and securely fixed by the holding element. Congratulations, your chandelier is ready!

Hanging structure made of horns

Making a unique lighting device from deer antlers is quite simple, the main thing is to have the necessary material on hand.

Such designs are famous for their special sophisticated appearance and are best suited for rooms with high ceilings. Such chandeliers are used in many interiors, but they look especially attractive in country, chalet or rustic style.

As a rule, the shades of such chandeliers have various shapes, and only natural material is used for their manufacture.

We will need:

• Antler
• Rope
• Copper wire
• Electrical socket and wire
• Bulb

Make a chandelier like this

1. Observing the safety rules, we connect the wire to the electric cartridge according to the diagram.
2. Next, the wire needs to be beautifully wrapped with decorative rope. For better fixation, you can use universal transparent glue.
3. Using copper wire, horns are attached to the lower part of the resulting rope, placing them 2 cm above the cartridge.
4. We repeat a similar procedure with the remaining lampshades, later combining them into a single composition.

Ideas for making beautiful lamps (photo, video)

We hope that the useful tips and photos presented in the article will help you not only make beautiful shades for chandeliers with your own hands, but also save your family budget.

Lighting is the most important component of the interior. The coziness and level of comfort of our home depends on lighting. The play of light and shadow allows you to play up the winning moments of the interior and divert attention from the unsuccessful moments. And also - lamps, floor lamps, chandeliers and lamps create the atmosphere that we call “home”. Unique lamps and The best way- make a lampshade with your own hands. Homemade lampshades and lampshades are the thing that will make your home stand out from others.

A few words about security

When manufacturing lamps, floor lamps and chandeliers in industrial conditions, the minimum distance from the “body” of the lamp to the materials is first calculated. This distance depends on the power and thermal radiation of the lamp and on the type (flammability) of the material from which the lampshade/shade is made. At home, it is unlikely that anyone will bother with such calculations. And in order not to create a dangerous situation, you should adhere to certain rules.

In general, after making a lampshade and installing it, in the first few days pay attention to whether the lampshade is heating up. Heating is any increase in temperature above environment. If the lampshade feels “warm”, change the bulb to a less powerful one. Check again. Do this until the homemade lampshade gets warm.

Where to get the frame

If you want to remake an old lamp, floor lamp, sconce whose old lampshade has become unusable, you can simply use the existing base, stripping old material. Before starting work, take a good look at the frame; if there is rust or damaged coating somewhere, maybe it’s worth stripping everything off and painting it again? At the same time, the color can be changed. If there are no old frames, you can buy an inexpensive lamp (in a store or at a flea market) and do the same operations with it. By the way, good lampshades can be made from waste baskets. There are wire ones and there are plastic ones. The main thing is to find the right shape and size. Then make a hole in the bottom for the cartridge. Then it’s a matter of decoration/plating, but here there are a lot of options.

If this method is not available, you can make a lampshade without a frame (there are some) or make a frame yourself. The material for making a frame for a lampshade with your own hands is: wire, wood (wooden or bamboo sticks, specially cut elements), plastic bottles.

How to make a frame for a homemade lampshade from wire

The wire for the lamp frame needs aluminum or steel. Aluminum is easy to work with, but it wrinkles easily. This is not very important when the lampshade is already in use, but this fact must be taken into account during work: the shape can be ruined. On the other hand, such plasticity allows you to easily and simply make changes to the shape during work. So it's a good option. Aluminum wire can be “mined” from electrical cables. You will have to remove the protective shell and you can use it.

Steel wire is more elastic, so it retains its shape well. You can look for it on the construction market. It's more difficult to work with. It is advisable to have strong male hands nearby.

In addition to the wire, you will need powerful wire cutters and pliers for the job. The lampshade frame usually consists of two rings and posts connecting them. The shape of the future lampshade depends on the size of the rings and the shape of the stands. Questions may arise regarding the number of racks and methods of their fastening. The number of posts depends on the size of the rings and how “round” you want the lampshade to be. The more stands, the smoother the fabric will lie. So it’s up to you to choose, but the optimal distance between the posts in the bottom circle is about 5-6 cm.

Techniques for creating a wire lampshade frame

How you attach the stack to the lampshade rings depends on the thickness and type of wire, as well as the tools you have. The simplest one is to make a small hook at the end, then clamp it tightly. To prevent the ring from sliding left and right, first sand the wire at the attachment point with coarse sandpaper. This is an option for thick aluminum wire. If the wire is steel, with a diameter of 1.2-2 mm or more, the best way is. Thinner wire can be bent and wrapped around a ring or also made into a hook.

If you make hooks and wrap wire, the appearance is far from being as ideal as that of factory frames. But this imperfection will be covered by the lampshade itself. If you still care about it, find the tape suitable color(usually matched to the color of the lampshade) and carefully wrap the resulting frame. It will get much better. The tape can be coated with PVA glue and, wet, tightly, turn by turn, wrapped around the frame.

Wire mesh

If you can find a mesh of thin wire, you can quickly make an almost perfect cylindrical lampshade for a floor lamp, table lamp, night light, lampshade for placing a candle, etc. All you need to do is cut a piece of mesh of the required length and width, roll it into a ring and secure the wires by wrapping them around the posts.

To prevent the mesh from straightening out, when cutting a piece, cut so that there are long free ends on both sides. We will use them to fasten the cylindrical lampshade. And the imperfection of the upper and lower rings can be masked with a ribbon of the desired color.

From a five liter plastic bottle

An interesting shaped lampshade can be made from a large plastic bottle. There are bottles for 5-6 liters and even 10. These are what you can use. Cut off the top or bottom of the container, depending on what you like best. In the cut off part we make a ring for the cartridge. If cut off top part, for some cartridges you can use a neck. For those who larger in diameter, it will have to be cut off.

Then we cut out the excess plastic and form the rims and pillars of the lampshade. To avoid mistakes, you can first draw all the lines with a marker. It will be easier to cut. Everything is elementary. Then we just decorate. And yes, it is necessary to cut out the plastic, otherwise the warm air will have nowhere to go.

Making lampshades on a frame

There are enough options for how to make a lampshade cover:

From tapes

The easiest and fastest way to transform an old lampshade for a floor lamp or table lamp is to use ribbons. You need a frame or lampshade in the form of a cylinder. It can be “naked” or covered with fabric. If you use a “bare” frame, light will shine through the cracks, which will create interesting lighting effects, but the lighting will be uneven. It's uncomfortable to read in this light. interior solution. If you need even lighting, first cover the frame with fabric. It can be the same color as the ribbons, a couple of shades darker or lighter, or it can be contrasting. It all depends on your desire. And remember that the darker the fabric, the less light the lampshade transmits.

We take a ribbon 1-2.5 cm wide. We fix it on the wrong side of the lampshade using PVA glue, additionally securing it with a pin. If you took a wire frame without fabric, attach it to the upper or lower rim (you can sew it on by hand, you can use glue). Then we begin to wrap the entire frame, from top to bottom, placing the turns of tape close to each other, but without overlapping.

Having completed the circle, turn the tape 90°. We fix it in this position (with a needle and thread or PVA glue, glue from a gun, temporarily fixing it with a pin, pressing it with a clothespin). Then we pass the tape under the first tape, pull it out, lay it on top of the second, then pull it down again, pull it up through one tape. So, gradually, we create an interlacing, filling the entire lampshade.

Alternatively, you can pass two vertical ribbons at a time. But then you need to make sure that each next row moves one crossbar. Then you get a different type of weave. This type of lampshade is ideal for floor lamps, since the light will be directed downwards and the dispersion through the walls will be small.

In this version, the ribbons can be the same, they can be the same color but of different textures, they can differ by a couple of tones or be contrasting. The tapes can be passed in a circle in a continuous stream, or at some distance. If you find a wide tape and apply it with an overlap, then you won’t need horizontal ones at all. And if you use a braided or twisted cord (in the lower photo on the right), we will get a completely different-looking lampshade. So this lampshade finishing technique alone gives you a lot of options.

Let's briefly present the ideas. There are many options for how you can design standard frames for lampshades in a non-standard way. The first method has already been announced: you can knit or crochet a cover for a lampshade. Several options in the photo.

Not everyone knows how to knit. It is easier to work with beads, especially if you glue them. You can decorate old fabric using beads, sequins, beads of different shapes and sizes. You can make this “new-old” lampshade with your own hands in a couple of hours. Select decorations that match the color, coat the fabric with PVA glue, and stick on the decorations. To complete the look, you can assemble pendants from beads and beads that are attached to the lower rim, but this is already painstaking work. The effect is interesting though.

You can sew a new lampshade from fabric. But it doesn’t have to be an updated copy of the old one. You should use your imagination! If a lamp or floor lamp is in the girls' room, a new cover for the lampshade can be made in the form of a skirt. You choose the style of the skirt yourself. They look interesting when folded. With and without ruffles.

You can use an old geographical map in the boy's room. They are on thick paper. If the paper is not thick enough, you first need to glue the card onto the cardboard, and then glue the lampshade from such a blank.

Original lampshades are obtained if the finished frame is woven with threads or ropes. Ropes can be natural. In this case they are gray, brown and beige. You can find thin synthetic colored cords. They will make products that are more “cheerful” in color. The situation is even simpler with knitting threads. They are thin, thick, textured, with smoothly changing colors. In general, there are a lot of options.

We take the frame and braid it according to a certain pattern. You can start with the racks. Braid each stand with a braid (the length of the threads should be 3 times the height of the stand). When this work is completed, we begin to stretch the threads/ropes between the posts. They will need to be passed through the braids, so with threads it is more convenient to do this with a needle, but ropes can be inserted this way.

The second option is to first entangle the entire frame horizontally, and then braid the racks. The braid won't work here, you just need to secure the turns to the stand using inclined stitches with a certain slope. This option is somewhat simpler in execution, but the “braids” look more decorative.

Homemade lampshades without frame

Many materials are rigid enough to hold their shape on their own, but at the same time they are flexible enough to make something interesting out of them. There are a lot of such homemade lampshades. And almost all of them are worth your attention. We will present here only part, the other part will go in the section with photos (see below).

From knitted lace doilies

Many people have crocheted napkins and they lie in “stashes”, because it’s a pity to throw them away and they don’t know how to use them. There is a very interesting idea - to make a lampshade out of them for a hanging chandelier. In addition to napkins, you will need a large balloon or inflatable ball, glue for heavy wallpaper (vinyl, silk-screen printing, etc.), and a brush.

Soak the glue according to the instructions and wait until it swells. We inflate a balloon or take a ball and hang it up. When the glue is ready, lay out a napkin on some clean surface, coat it with glue, and place it on the ball.

It must be laid out in such a way that there will be a hole in the center for the cartridge. We glue the napkins one by one. They need to be laid out so that the edges overlap slightly. When all the napkins are laid out, coat them with glue again and leave until dry. When the glue has dried, deflate the ball or ball (the ball can be pierced, if you don’t mind) and take it out through the hole. That's all, the lace lampshade is ready.

In some cases, problems arise with how to hang the finished lampshade on the socket. The problem is solved simply - take a transparent plastic bottle, cut off its neck, if necessary, expand the hole to required sizes(so that it fits tightly onto the socket), then cut the plastic so that you get a ring 5-7 cm wide. Coat this ring with PVA glue, and glue it to the lampshade from the inside of the ball.

Round lampshades made of threads

Almost the same technology can be used to produce round and semicircular stylish lampshades. Choose threads of a suitable color. Their composition is absolutely unimportant - what matters is color, thickness and texture. They can be shaggy, smooth, twisted, thinner and thicker. The appearance depends on this. It is most convenient to work with cotton threads of medium thickness. They absorb glue well and then, after drying, keep their shape perfectly.

You will also need a ball or ball. This will be the base of the lampshade, which gives the shape. You can choose the dimensions of the base as desired. The threads will need to be glued together; for this you will need PVA glue. It is poured into a container and diluted with water in a 1:1 ratio.

You can use other glue. It is important that it becomes transparent after drying. This is WB-29 from TYTAN Professional and D2 glue for carpentry. If you use any of these types of glue, read the instructions.

On the ball or sphere we will draw a circle, which will be slightly smaller in size than the lamp socket. On the opposite side, draw a larger circle - this will be the lower edge of the lampshade. Now everything is ready, we can start.

We coat the threads with glue and wind them around the ball in a chaotic manner. It’s more convenient to do this if the glue is poured into a container - you can put the whole skein in there and just pull the thread slowly. With glue in a tube, everything is not so comfortable: you have to coat sections up to a meter long, wrap it around, and coat it again. It takes much longer. This is if you do not use PVA. But the products turn out to be more rigid and do not sag or change shape over time, as can happen with PVA thread lampshades.

When winding threads around the ball, carefully go around the drawn circles. If you accidentally climbed into the “forbidden territory”, simply move the threads, forming a smooth (more or less smooth) edge. When the threads run out or you decide that the density is enough, the process can be stopped. We tuck the edge of the thread between the others. All. Next, coat the ball with wound threads again with glue (PVA can be poured over) and leave to dry (at least 2 days). To prevent the ball from rolling, we find a bowl or pan and use it as a stand.

The last stage is to deflate the ball or balloon. If the ball has a nipple, press it with a thin wire, releasing the air. We take out the deflated ball. That's all, you can thread the lamp inside and test the lampshade.

The technology is the same, but the appearance is very different...

Using the technology described above, you can make not only round lampshades. Rectangular, triangular, trapezoidal. Choose a base that is easy to remove, wind threads soaked in glue, braid, even sticks, newspaper tubes etc. After drying, remove the base and voila, you have made a lampshade with your own hands. A couple of examples in the photo below.

You can also use chopsticks... Just wrap the ball with cling film and use transparent carpentry glue rather than PVA glue

This is a paste-like polymer clay in a tube, which was applied to a milk carton, then dried and the bag was removed...

Creative homemade shades for lamps, floor lamps and chandeliers

It’s simply amazing what people don’t make beautiful and unusual things out of. A lampshade made from a cup, grater, bottle, beer or glass jar, metal parts and beer can rings... It seems everything can be used...

Lampshade made from an old sieve... stylish

Candlesticks turn into lamps... without lampshades

You can't tell in real life, but these lampshades are made from hooks used to open metal drink cans and canned goods... if you paint them, it will be even more interesting

Don't know what to do with grandma's crystal? Make lampshades out of it...

Do-it-yourself original lamps and lampshades. Ideas, master classes

DIY lamps and lampshades. Ideas, master classes

Hi all!

Creating or decorating lamps and lampshades is not only an incredibly interesting activity, but also quite useful: it allows you not only to create a unique item, in full accordance with the interior of your home, but also to save a lot of money. It is enough to buy the simplest lamp for little money and decorate it to your liking. And there are a huge number of options for what and how to make, in a variety of techniques, using a variety of materials.

I have selected ideas for creating and decorating lamps for you and me, I hope you can choose for yourself suitable option:) Enjoy watching!

The lampshade is decorated using decoupage technique, the base of the lamp is made of books

The decor of the metal frame of the lampshade with feathers is very stylish :)

Quite often fabric or paper flowers are used to decorate lampshades; the result is very romantic :)

Flowers made of fabric with candle processing

Calico bundles are used as flowers here.

Twisted fabric flowers

Ready-made flowers are used here

The flower is made of a cotton strip of fabric, strung on one side and gathered into a bud

Spiral roses from newspapers

The bottom of the lampshade is decorated with spiral paper roses

Ikea lampshade decor with paper flowers

Lampshades made of lace and knitted napkins look very beautiful

The shape is given with glue

The balloon is inflated and lace napkins are applied to it using glue. After drying, the ball is pierced, deflated and removed.

Very nice option: used as a lamp base bird's cage, the lampshade is decorated using decoupage technique with obsolescence.

Even an umbrella can be used for a chandelier :)

Even scraps of fabric scraps can be used: wrapped and tied in a knot. This option will fit perfectly into the design of a country house or children's room.

Buttons

To make lamps, various glass containers - jars, bottles - are very often and successfully used. Below I have given a master class on making such a lamp.

A bottle as a lamp base - a similar master class is also given below

It’s a little more complicated here - at the bottom of the back side of the bottle there is a hole drilled through which the cord is inserted.

The lamp is made of figured metal sheet

The origami technique has been successfully used to create lampshades

Fabric strips glued to the base of the lampshade

Lampshade made from various retro leaves

Lampshade from a basket - why not? :)

The second life of a metal colander

Unnecessary forks and spoons have created a very interesting option chandeliers:)

A very nice solution: stretched onto a frame metal grid and beat the poultry house. I think for a children's room.

And here's more on the bird theme :)

Painting a lampshade with acrylic paints

Fine veneer lampshade

The base of the lamp is covered with sea shells

Knitted lampshades - they look very cozy :)

Decorate lampshades with memorable photos and slides

The flowers on this lamp are the bottoms of plastic bottles :)

Lampshades are covered with paper circles

Plant lampshade :) I think it’s still a little hot for the flower there :)

Lampshade made of laces

The decoupage technique is also used here.

A very interesting solution - wire as an art object :)

The lampshade is decorated with strips of fabric

Lamp made from branches

The lampshade is decorated with crumpled-squeezed coffee filters (muffin tins)

Glass vase lampshade

The base of the lampshade is made up of unwanted toy soldiers glued on and spray painted

Creative lampshade made from felt strips

Lampshade made from ping pong balls :)

Floral decor

And many, many more different ideas...

Master class on making a lamp from a can with a metal lid from Tom&Brit (bestofinteriors.com)

Punch holes with a nail to create a hole

Insert the cartridge

Paint it one color

Screw in the light bulb and insert it into the jar

The lamp is ready :)

Paper lamps from varrell.com

We need an image of a castle

Cutting out, cutting out windows, gluing

We place it inside spotlight battery operated

Rope Chandelier by Sarah M. Dorsey (sarahmdorseydesigns.blogspot.com)

We will need a rope, Mod Podge glue (can be replaced with diluted PVA), a ball

To create the wavy shape, Sarah used wooden slats. Lay out the mold and coat it with glue to secure it.

After drying, place it on the ball and coat it generously with glue.

After drying, remove the lampshade from the ball and paint it with white spray paint - Sarah has four layers

Very beautiful lampshade from granny squares from the author of the resource Aboutgoodness.com

We cover the lampshade with fabric

Fold the strip of fabric in half lengthwise and roll it into a roll.

Straighten slightly

Apply glue to the fold and glue it to the base

Master class on creating a base for a lampshade from Kiri (ilikethatlamp.com)

Required components

Wash the bottle thoroughly, disinfect and dry it

Cover with spray paint

Installation process

,

This is how a gin bottle turned into a base for a lampshade :)

As you can see, creating lamps and lampshades with your own hands is quite simple and very interesting. Give free rein to your imagination, create and let your home be beautiful and cozy!

Well, for those who still prefer to buy ready-made lighting, I recommend checking out a specialized online store Lampa.ua- www.lampa.kiev.ua/katalog/nastolnye_lampy/, where a huge range of high-quality and stylish table lamps, chandeliers, sconces, accessories, etc. are presented. from the best manufacturers and at very flexible, pleasant prices :) By the way, according to Google statistics, this online store is the most popular among Ukrainian buyers :) Use it with pleasure!

I wish everyone good luck and a great mood!!

Are you dreaming of adding brightness to the nursery or refreshing your workspace in the house? Or maybe you are a lover of the East, where the fashion for these such delicate little things came to us from? Then you should definitely read how to make a lamp out of paper with your own hands - unusual, original little things will instantly add a bit of magic to any corner of the house!

We guarantee that your guests will be asking for a long time where you bought this designer lamp, and having learned that you made it yourself, they will ask you to tell you how to make a paper chandelier with your own hands and its step-by-step instructions.

In this master class we will show you four ways to make a lamp out of paper, look and choose the option that’s right for you.

To create this delicate lamp, prepare:

• Colored paper of any color;
• PVA glue or glue stick;
• Paper clips;
• Compass;
• Scissors;
• Fishing line;
• Colored yarn;
• LED lamp ( );
• Wire with switch.

Step-by-step instruction:

Step 1

• Using a compass, draw semicircles 1 cm wide on a colored sheet of paper.
• With each line we increase the diameter of the semicircle.
• Please note that you will need quite a lot of sheets. Then cut out semicircular strips and cut them into pieces of 2-5 cm.

Step 2

• Roll and glue the resulting strips, making one side larger than the other - this will make it easy to glue them together into a dome-shaped shape. After that, you can connect them with glue in pieces of five.
• Glue the clusters together, strengthening them with paper clips until the glue dries. Glue until you have a circle, with a small hole for a lamp.

Of course, you can fantasize, and your lamp will be a little different than ours.

Step 3

Now, while our glue is finally drying, let's decorate our wire. To do this, take yarn of any color you like and carefully begin to rewind the wire with it. Try not to leave any uneven spots when wrapping the yarn over the previous layer.

You can add a drop of glue to the end of the yarn to strengthen it.

Step 4

Let's make a holder for an LED lamp. To do this, let's tie with three sides(it is advisable to measure the distance evenly) the fishing line to our glued strips, and the other ends to the paper clip, which we first straighten to the shape of a triangle.

All! All that remains is to place the lamp in the circle and screw it to the wire. You can hang such a lamp either separately or in combination with, for example, .

Master class No. 2: Chandelier made of rice or parchment paper

We present to your attention a new master class in which we will teach you how to make lamps from rice paper. There is nothing complicated in making it, as it might seem at first glance, and you can involve all household members in this exciting activity. The designer lamp is suitable for both the nursery and your bedroom.

Instead of rice paper, you can buy a roll of parchment paper for baking

So, to make a lamp you will need:

• Unnecessary lampshade;
• Thin wire;
• Several rolls of rice paper;
• Iron;
• Paper cutter;
• Sewing machine.

Self-production

Step 1

Take a lampshade you don't need (you can buy inexpensive new) and remove everything from it, leaving only the base. If your lampshade is similar to ours, then add a wire in the middle, securing it well.

Step 2

1. Prepare the parchment paper by unrolling the rolls and cutting them into roughly equal rectangles.
2. Iron the sheets until they become completely even and smooth.
3. Fold each sheet like an accordion, measuring equal distances of strips, and use a paper cutter to cut equal, even circles.
4. Try to use the cutter more carefully and don't leave a lot of extra paper– you will need a lot of circles.

Step 3

1. Connect all the circles together by stitching in the middle. Make connected circles of equal length and begin to strengthen them around the circle of the lampshade.
2. Once you complete the first circle, go around the subsequent ones, decreasing the length each time.
3. Carefully secure your lamp in the desired location, straightening all the threads.

Remember to only use LED bulbs, to avoid fire.

This beautiful chandelier- the result of painstaking work, after completion of which you will admire your work and be proud of yourself for a long time. On our website you will find many more ways to diversify your home lighting, for example:

• you can or .
• , for lovers of modernism.
• Or for lovers of eco-style.

You can also at your discretion, paint the rice paper circles in any shade, based color range rooms. If you want to hang this lamp in a child's room, you can add, for example, glass angels on long gold threads - again, choose the right accessories for your child's room. different rooms, this will add warmth and originality.

WARNING: Be aware that incandescent lamps produce very hot temperatures and may cause paper to ignite. For paper lamps and fixtures, use only LED lamps.

Master class No. 3: Origami chandelier made of paper

This beautiful bright lamp really resembles a ripe berry!

To make it, take the following:

• 2 paper bags, so that when gluing you get a one and a half meter bag (preferably with an interesting print);
• LED lamp (never an incandescent lamp );
• Wire with switch;

As soon as you decide that training is no longer necessary, we begin preparing the paper bag. Remove the handles and cut the bottoms off the bags and glue them together to make one large paper bag.

Fold the resulting bag in half, and then fold the halves like an accordion so that you get 16 identical folded strips. Then fold the two outer strips diagonally.

Follow the simple diagrams and you will get wonderful lamps to decorate your home. You may have to practice a little to fold origami perfectly, but you won’t regret it, because origami is a whole world of various interesting things created with your own hands. And your children will simply be amazed by your skillful hands!

Master class No. 4: Corrugated paper lamp

To make an unusual lamp you will need:

• Corrugated paper 88×44cm;
• Ruler;
• Spoke;
• Glue;
• A thread;
• Cable;
• LED lamp ( never an incandescent lamp ).

Step 1

• Using a ruler, mark a sheet of paper at equal intervals and fold like an accordion according to the markings.
• Helping yourself with a knitting needle, fold the folded sheet of paper diagonally, first on one side, and then unfold it on the other side.
• Unfold the sheet - you should have it double sheet marked with diamonds.

Step 2

• Connect the marked lines according to the photograph; it is advisable that the sheet is not very wrinkled at this time - otherwise the appearance of the lamp will be spoiled.
• All that remains is to connect the top of the lamp with a thread so that it does not fall apart, and secure the cable with the LED lamp.

Be safe - do not use regular incandescent lamps, they heat up the paper and it may catch fire.

Paper butterfly chandeliers

The most popular paper chandelier is the butterfly chandelier. And such love for this product is not just:

• Firstly she looks very chic and expensive.
• And secondly The production is very simple, even a child can be involved.

Such an elegant lamp will go well with any interior style, and it is also appropriate in the living room or dining room and even in a children's room.

Manufacturing technique:

1. It is taken as a basis old chandelier or a frame from it. If this is not the case, then you can take a regular metal or wooden rim. If there is no such thing, take a thick wire and make 2-3 coils of yourself, so that you get a circle.
2. Cut out butterflies according to the template (butterfly template below)
3. We take a nylon thread or fishing line and attach butterflies to it. There can be two types of fastenings: either we pierce the butterflies or we put them on silicone glue. Whichever is more convenient for someone.

Butterfly pattern

To make a chandelier with butterflies, simply take a template and scale it to your size. It looks very nice if you make butterflies of several sizes, for example 3-4 diameters. Using a pencil, draw the sketch on paper and cut it out.

• It is best to cut with stationeryknife or straight manicure scissors without curves.
• It's better to use paper more dense and which does not attract dust, for example velvet structure. Since you will have to vacuum such a chandelier often

Also a very beautiful option is obtained if you make a ball out of wire, take as a basis an old pendant from a chandelier and place it using glue gun several butterflies.

Paper ball chandelier

The basis for such chandeliers is a ready-made Chinese lamp made from rice paper. They are usually very cheap, down to 1-2 dollars. But you can decorate it however you like with paper tartlets, an unnecessary map, newspaper or sheets of old books. We are publishing several ideas for decorating a ball chandelier with paper.

Paper New Year lamp

A regular idea for the New Year is to use an old lampshade and string snowflakes of various shapes onto a string. Very impressive and beautiful. Below are a few photo ideas such decor for the new year.

To polish your skills, as well as add to your collection of unusually beautiful lamps, look at more ideas and. We are sure that among them you will find many that you will definitely want to create!

2 ratings, average: 5,00 out of 5)