How to decorate a chipboard door. DIY interior door decor

Just as a person is judged by his clothes, any living space is judged by its doors. Therefore, sometimes in order to update the design of a room you do not need to carry out expensive repairs, but you can make original door decor with your own hands.

Doors perform two complementary functions: firstly, they limit and separate the spaces of one room from another and, secondly, they are elements general interior neighboring rooms or even the entire apartment, which form the visual and functional space of rooms limited by doors. However, decorating a door can be done not only due to the aesthetic renewal of the living space, but also for trivial reasons, such as the appearance of scratches or cracks, as well as chips on the canvas. In these cases main goal decoration can be hidden various defects door leaf, but this could be an opportunity to update the design of the entire living space.

So, there are a huge number of ways to make decor interior doors with your own hands, as well as decorating the front door, and the simplest and most affordable of them involve decorating door panels using wallpaper.

Wallpapering the door

To carry out such decoration, doors are used both on paper and on another basis, as well as fabric and various types of liquid wallpaper. Any method of updating doors using decoration involves preparing the door leaf for this procedure. Decorating an interior door is no exception to this rule. In the process of preparing for decoration, they not only get rid of the previous coating - this makes it possible to identify and also eliminate previously unnoticed hidden defects of the product.

Preparation for door decor is as follows:

1. In the distance old paint. To do this using construction hair dryer you need to heat up the old paint and scrape it off the canvas with a spatula.
2. In sealing with putty, detected defects, as well as eliminating irregularities. Then all problem areas leveled with putty should be treated with fine-grained sandpaper.
3. In carrying out puttying the entire surface of the canvas. This makes it possible not only to level its entire surface, but to additionally fasten its individual elements, which is very important especially for paneled canvases. After applying the putty and letting it dry, you can go over it again with fine sandpaper.
4. In painting doors with a primer.

The choice of wallpaper and how to paste it, for example, use either the same type or panel pasting different types wallpaper depends on the individual preferences of the one who will do it himself. In this process, the main thing is to correctly select the most suitable glue for certain types of wallpaper, and also dilute it strictly following the instructions included with it. In addition, you need to make sure that there are no missing areas left on the surface that is spread with glue, and you also need to carefully smooth the just pasted wallpaper with a damp cloth or roller to prevent wrinkles and air bubbles from forming.

When drying the pasted surfaces, it is necessary to prevent the presence of drafts. Otherwise, all the work of such door decoration will go down the drain.

Door decor with photo wallpaper, fabric

The decor looks original fabric wallpaper, as well as using photo wallpaper. However, in the process of decorating the door with fabrics other than the standard one described above preliminary preparation door leaf, it is necessary to take into account the degree of shrinkage of the fabric. To do this, you need to test the fabric, measure a small piece of it and wet it with water until it dries. After this, measure its dimensions again and compare to obtain the shrinkage result. Moreover, if the degree of shrinkage of the fabric is high, it must be completely wetted and allowed to dry, and then you can begin the gluing process.

It is necessary to take into account that you can use both solid fabric and its fragments of different textures, as well as different colors. Now this technique of decorating doors and other surfaces is quite widely used by professional designers, who call it “patchwork”.

Decorating doors using liquid wallpaper

Liquid wallpaper is good because it has versatility, that is, it can cover absolutely any surface, creating very original and varied compositions and patterns. However they have significant shortcomings– they are afraid of moisture (which means they cannot be used to decorate bathtubs and kitchen doors), they, unfortunately, are short-lived.

In order to decorate yourself, you will need the following materials, as well as tools:

• the mixture you selected for decoration in dry or diluted form;
• several sized types of spatulas;
• the so-called hopper gun, which is a device for applying liquid mixtures;
• roller;
• the color you have chosen;
• clear nail polish.

For decorating with liquid wallpaper, standard preparatory work takes a slightly different form in terms of coating the door leaf with an alkyd-based primer and white oil type putty.

Preparing wallpaper mixture for decoration

The door decorating process itself consists of breeding warm water wallpaper mixture, and it must be mixed thoroughly - this can be done absolutely safely by hand. After a quarter of an hour, the mixture needs to be mixed again, but now adding the color you have chosen to it. Moreover, as for the color saturation of the mixture, the more color is added, the more saturated the color will be. For example, for moderate tones, it is enough to dilute one measuring cap of color per five liters of mixture. To realize the idea of ​​a color composition when decorating, you need to dilute mixtures with different colors in different containers.

When working with wallpaper mixtures, it should be noted that their instructions for use indicate the need to infuse them for 12 hours before using them.

In order to apply the mixture, you need to take it in small portions on a spatula and apply it to the surface, smoothing it and stretching it to the sides. In the process of applying the mixture to the door, you need to ensure that the drawings are followed, and that its layer should be of the same thickness. To give a relief surface, you can use textured roller. After the decor has dried, which will take up to three days, you will need to cover it with clear varnish.

The advantage of working with mixtures is that if you didn’t like the first version of the door decor, as they say, the first thing happened, then the coating can be easily washed off with warm water and then reapplied.

How to decorate a door with a mirror

As for the use of a mirror for decoration, this method is, first of all, preferable for small and dark rooms, as it allows you to visually increase the space of the room, adding light to it.

It is problematic to use classic mirrors for decoration due to the fact that they cannot be adjusted to the size of the door itself or its individual elements. So-called acrylic panels with an amalgam surface, which, in fact, is a real mirror surface, are ideal for this. Moreover, mirrors made of plastic can be easily cut, they are available in a wide variety of color shades, ones that will help you easily realize the most daring original ideas and plans. They cannot be broken, they are lightweight, they attach well to any surface, but they have one drawback - their high price.

But as they say, a good thing a priori cannot be cheap, so you have to pay dearly for high quality, practicality, and aesthetics. However, with regard to acrylic mirrors, these are justifiable costs.

For mounting these mirrors on the door leaf itself, as well as on reverse side acrylic, you need to apply a special deep-penetrating primer, and to fix the elements of a cut or solid mirror, you can use double-sided tape or mounting adhesive.

Decorating the door in vintage style

This style involves the implementation of artificial aging of products and things, which should contrast with the brilliance of their individual decorative parts for greater sophistication and sophistication. As a rule, products decorated in vintage style are some kind of works decorative arts and therefore exclusive, that is, not similar to any other things.

To decorate a door in vintage style, using the so-called decoupage technique, you need, for example, to have:

1. Acrylic paint, usually white.
2. Various rollers and brushes.
3. Coarse sandpaper.
4. Any mounting adhesive.
5. In addition to assembly glue, there is also PVA glue.
6. Old newspaper paper, as well as old music notebooks.
7. Baguette black or any other dark color.
8. Clear nail polish

In order to paint a door to match the decor of the door using decoupage techniques, it must be removed from the awnings and laid horizontally. Then you need to remove the old paint and you can sand it with coarse sandpaper.

The decoupage algorithm may look like this:

1. Painting is done with a thin layer of white paint. Moreover, this is done with a wide brush in one direction.
2. After the paint has dried, it is sanded to an “antique” state with coarse sandpaper.
3. Then they begin to decorate the central part or its paneled parts of the canvas, having previously torn old newspapers, as well as music notebooks into random pieces of paper and randomly laid them out on areas of the door leaf smeared with glue. You can smooth the paper either with your hands or with a roller. And then you can apply two layers of transparent glue.
4. The perimeter of the paper decor is pasted over with a black baguette or any other dark color using mounting adhesive.

You can create original decor with your own hands in other ways, using home material, connecting both your own irrepressible imagination, as well as realizing the ideas of your family and friends.

The interior door occupies an important place in the interior of the room. It not only serves as a barrier to noise, delimits space and allows privacy, but is also a noticeable piece of decor.

Several reasons may motivate you to decorate an interior door:

1. Firstly, despite the huge selection of ready-made (and very attractive) doors, it is sometimes very difficult to find a suitable model. Sometimes all the doors seem the same - “I’ve already seen this one at the neighbors’, “and this one looks like the door to our office.” You don’t want to repeat yourself and buy something that is unoriginal and has become banal, because your interior is unique, so the door should match.
2. Secondly, even an old door with scratches, peeling paint and irremovable stains is often why you don’t want to replace it! After all, any replacement of a door is also a replacement of the frame itself, which is associated with dust, plaster, sealing the resulting cracks, the need to change the wallpaper (at least around new door) - in general, with local and sometimes major repairs.

That is why sometimes it is much easier for the owner to update already installed door“on the spot,” that is, without changing the entire box, right here in the room. Of course, in some cases you will still have to remove the door from its hinges, but this is much easier and faster than undertaking a full-fledged repair. Whatever the reasons that prompted you to start decorating an interior door, we’ll say right away that often this requires practically nothing except materials left over from the previous renovation.

So, we offer you 14 ideas for decorating an interior door that you might want to bring to life when decorating your interior.

The first idea. We paint, we just paint

The easiest way to get your door in order without any frills or extra work. To do this, you will first need to remove the door from its hinges, then go over it with a spatula, removing the old paint, level the surface with sandpaper, fill up cracks and scratches with putty, remove greasy stains, cover the glass with masking tape so as not to stain it, and you can take it to the hands roller or brush! It is better to choose acrylic paint - it dries faster, and paint the door in a horizontal position - this way the paint will not drip and will lie more evenly. However, if you are comfortable doing all of the above vertically standing door- you don’t have to take it off the hinges. Just remember to place something on the floor while painting so as not to stain the linoleum or laminate.

White, simply painted door. Renewing it or repainting it in a different color will not be difficult, although the moldings and carvings need special, careful handling during sanding and removing the old paint layer

Idea two. We paint in several colors

The option is more complicated, although it also involves coloring. In this case, we don’t just paint the door one color, but create a simple or complex geometric pattern of stripes, squares, diamonds, and so on. The door must first be prepared, as in the first case - that is, cleaned of old paint and leveled the surface. However, in this case we will need much more masking tape- it is with its help that you will delimit zones between stripes or rectangles. In addition, in order not to buy several cans of paint of different colors, you can purchase white paint(one liter per door is enough), as well as several dyes with which you can experiment with shades.

Gold and white, blue and soft pink, bright stripes on a neutral background, diamonds and winding lines - a variety of patterns and color combinations can appear on your door leaf

When choosing a geometric pattern, remember that a wide strip along the entire door leaf is more suitable for country style, and for classics it is better to choose other options, for example, paint the upper part of the door in a more light shade and divide the parts with a horizontal stripe

Idea three. Highlighting moldings

Also painting the door, which in general is not too different from the first option. However, in this case we will focus on the moldings, painting them in a contrasting color. White and black are a great but overused combination, so think about what colors will look best next to each other. Designers have long recognized white and green, blue and yellow, red and dark blue as excellent options. Such a door will look great both in a bohemian boudoir and in a strict classic living room.

A white door with highlighted black moldings is a true classic. By the way, if your door does not have such decorations, it is easy to make them yourself - special thin wooden strips are sold that are simply nailed onto the door leaf

An unexpectedly bright, pink door that looks especially aristocratic and attractive thanks to the frames highlighted in white

Idea four. We paint according to the finished stencil

A very convenient and simple way to turn your door into a work of art, even if you do not have the talent of an artist. Ready-made stencils can be purchased in construction and specialized stores, or ordered on one of the websites, and the choice of designs and patterns is very large. Then we simply apply the stencil to the already prepared door and apply paint. Easy, fast and the result is very beautiful!

Applying a drawing using a ready-made stencil is as easy as shelling pears, and the choice will allow you to choose an original inscription, an exotic pattern, or an unusual picture

Such a deliberately simple design can be easily created without stencils. It was the uneven lines and simplicity that became its main highlight.

Idea five. Artistic painting

Unlike all the door decoration options already listed, this option is not for everyone. To create a real masterpiece on an ordinary door, you will need the talent of an artist and certain skills in working with brushes, since a roller is no longer enough. Imagine that your door is a blank white canvas, on which, thanks to your skill, a beautiful landscape, a cheerful painting or an exquisite pattern will appear. Fine hand painting always looks expensive and stylish, and you can achieve this effect by spending only on the purchase of paints.

Many European companies offer ready-made interior doors with artistic painting. They are, of course, not cheap, so you can try to create something similar with your own hands. Are you afraid that it won't work out? You can always just paint over a bad drawing!

Idea six. Children's creativity

Does your little one love to draw? Give him this opportunity - let him decorate the door to the children's room himself. Yes, such a naive, bright pattern would be out of place in a formal living room, but as a decoration for a child’s room - great option. Just agree with the young artist that the second half of the door is already your field for realizing your fantasies!

Usually children's paints are washed off very easily, so your novice artist will be able to paint the door again at least every day. But you will have to first prepare the canvas by putting the door in order

Idea seven. Unusual texture using paint

If you think that simply applying paint is boring, and you are afraid to take on hand painting, you can try to achieve an unusual texture, for example, the effect wooden surface or an antique door using a very simple devices. So, using a sponge you can get a mottled surface, steel wool can help you achieve the effect of an antique door, and a stiff brush can create an expressive surface on denim. Special ready-made paints are also sold that perfectly imitate jeans, wood, canvas, velvet or slate board.

On such a door, painted to resemble a chalkboard, it is convenient to leave messages for household members

Idea eight. Photo wallpaper

If all the previous ideas concerned only working with paints and brushes, then this method is suitable for those who do not want to mess with paint. Photo wallpaper will instantly transform appearance your interior door, turning it into a striking design element. Of course, it is best to purchase photo wallpaper designed specifically for doors - in this case, your drawing will definitely look complete. Ready-made photo wallpapers usually have a standard size of 86x220 centimeters, so they are suitable only for standard doors, and without moldings and glass inserts. However, now many online stores offer custom-made photo wallpaper for doors, so you can choose the option that is ideal for your door, with any pattern. You can cut doors and regular wall murals to size, but in this case the design may look unfinished.

How do you like this unusual option- a door turned into a telephone booth with the help of photo wallpaper?

Before sticking photo wallpaper, the door must be cleaned of stains, and the surface must be leveled, sanded and degreased with a solvent. You can use regular wallpaper glue, but PVA is much more reliable. The disadvantages of this option for decorating a door include the fact that a bright image will immediately catch your eye, so it can quickly get boring. In addition, photo wallpaper on the door will lose its original attractiveness due to frequent touches. However, no one will stop you from changing the photo wallpaper on your door to something more original in a couple of months.

Photo wallpapers with picturesque landscapes are especially popular

Photo wallpaper on the door will help, due to the increased panoramic perspective, to make small room visually more. And it’s very easy to stick them on; you don’t even need to remove the door from its hinges.

Idea nine. Regular wallpaper

Previously, this decorative option was particularly popular, but now many designers consider it bad manners. This does not prevent ordinary wallpaper, which has “migrated” to the door, from remaining a popular way of decorating the interior. As an option, you can buy cork wallpaper and coat it with varnish on top for reliability. Their unusual texture will make the door more original.

Preparing the door is exactly the same as when using photo wallpaper. The main advantage is low cost, since you can use wallpaper left over from a previous renovation, and ease of decoration. The main disadvantage is rapid wear and tear - the wallpaper can peel off and tear at the joints.

Wallpaper glued not to the entire door, but to parts highlighted by moldings, looks more impressive

A door covered with the same wallpaper as the walls will literally blend into the interior. The reverse side of the door, of course, is covered with other wallpaper so as not to stand out against the background of the wall of another room.

Idea tenth. Fabric instead of wallpaper

This option will look especially cute and homey. A door decorated with fabric looks original; the choice of fabrics today is surprisingly wide, but this method also has its drawbacks.

If you choose a single piece of fabric to decorate a door, you should take care of the original design

First, when choosing a fabric, you should make sure that the glue will not leave stains on it. Secondly, the edges of the fabric should be pre-treated, otherwise the protruding threads will not look very aesthetically pleasing. Thirdly, doors decorated with fabric will not suit every interior design style. Those who are fond of patchwork, that is, creating canvases from different pieces of fabric, can turn their door into a real applique of bright scraps. By the way, if there is space on the door for a glass insert, you can hang a small curtain here, securing it with fishing line and small nails.

A very cute door, decorated using patchwork technology. The trouble is that classic style Such bright shreds have nothing to do with the interior; this is an option, rather, for “rustic” and colorful country

Idea eleven. Posters, cards, paper

Option for creative people and great idea for a teenager's room. The door can be decorated with a poster and an image of your favorite artist or group, sheets from an old geographical atlas, or sheet music. Pasting such paper sheets and posters is as easy as regular wallpaper.

An old geographical map would be appropriate even on the interior door of an ordinary living room, but it is better to “place” posters in a teenager’s room

Idea twelfth. All kinds of stickers

This simple and not too expensive way of decorating a door is becoming more and more popular today. Vinyl stickers can be purchased in online stores, cost of size model standard door starts from 2.5 thousand rubles, they are glued very easily, and will last longer than ordinary photo wallpapers.

Stickers with such funny and at the same time useful inscriptions will not only decorate the doors, but also cheer up the guests

If you don’t want to hide the entire door behind stickers, you can easily purchase small images- a butterfly, a bright flower and so on. They are cheaper and appearance the doors will be completely transformed. “Informative” stickers are also popular, for example, on the door of an office, bathroom or toilet, which will tell guests what is hidden behind this door.

The elegant lady on this sticker will immediately inform guests of the house that the bathroom is hidden behind this door

Often, stickers can look like ordinary photo wallpaper, and sometimes they can look like hand-painting on a white door or a child's drawing

Idea thirteen. Decoupage

The technology of meticulously cutting out the images you like from paper and then making appliqués from these pieces allows you to transform not only a box or photo album cover, but also an ordinary door. Everything a beginning master of the ancient art of decoupage will need: paper drawings, napkins with a pattern you like, postcards and the like - everything from which you can cut out a design, a brush, PVA glue, scissors, glitter, acrylic varnish, outline and acrylic paint.

In the decoupage process, you can literally use anything - from scraps of old newspapers to greeting cards

IN brief description the process looks like this: apply a layer of white acrylic paint to the surface of the door, wait until it dries, then another layer - and again wait until it dries completely. Then we apply a layer of paint of the selected shade, and then use PVA glue to attach the cut out paper drawings. At the same time, we try to glue the piece as smoothly as possible, without folds, and to expel all air bubbles. Using glitter and contour we can add dots, stripes and other small details. Then we cover the finished picture with a layer of varnish. That's all. The rest is your imagination and beautifully selected drawings.

The decoupage technique allows you to create amazingly beautiful paintings, and the varnish coating will extend the life of the decor

Idea fourteen. Mosaic

A door decorated with bright mosaics will be an excellent option for a bathroom; you can decorate a metal one in this way front door. Moreover, it is not at all necessary to use pieces of ceramics for these purposes - in this case the door may turn out to be too heavy. Mosaics can be created from pieces of wood or veneer, or you can purchase a ready-made one made from glass.

In this case, a bright glass mosaic occupies most of the door, making it very unusual and cheerful.

The mosaic is attached with special glue (Moment or liquid nails are suitable) onto a prepared and cleaned surface. It is worth thinking through all the details of the pattern in advance by drawing a diagram of the arrangement of the pieces with a pencil. By the way, you can decorate not only the door itself, but also the frame with mosaics, highlighting the slopes using the selected pattern.

Creating a mosaic pattern is a huge scope for creativity. And if any part does fall, you can always attach it back

An old door can become a real art object; all you need is a little imagination and effort. To get started, you can use one of the most simple ideas, and then, having gained a taste for it, try yourself in the art of decoupage or painting. In any case, your door will definitely be one of a kind!

Tags: ,

Doors play an important role in the design of premises. There are many in stores different models, but quality ones cost big money, but I usually don’t even want to look at cheap ones. Eat good option— update old doors with your own hands. There are many techniques, and not the most complex ones, that can correct the situation for little money.

Preparation

Whatever method you choose to update an old interior door, you will need to carry out a series of preparatory work. Usually old painted specimens are going to be decorated. Painting is usually amateurish, so there are no uneven spots, sagging or other minor defects more than enough. They all need to be leveled.

Remove the door leaf from the hinges and lay it on a flat surface. You can - on a trestle or a table. We take wood putty (even if they are from or) and cover all the holes, chips and depressions with it. After drying, move on to next stage- grinding.

Let's take it sandpaper with large grains and small ones. We process to achieve a smooth surface. If you work manually, it takes a lot of time and effort. With a hand sander, work moves faster. If painting is planned next, we try to achieve as smooth a surface as possible. If you plan to decorate with wallpaper, fabric, self-adhesive film, it may not be brought to the ideal, but it should still be exactly.

Next, remove the dust and wash off the residue with water and diluted dishwashing detergent. Dry it. Further actions depend on the selected update method. If you are going to glue fabric or wallpaper of any kind, you can prime the surface (with thinly diluted glue or a special primer). After the primer has dried, you can glue the selected type of decor or apply paint. By the way, if you are going to paint the doors, you need to select the same type of paint that was there before, otherwise you will have to remove everything to a clean base, and this is very difficult.

Renew old doors with wallpaper

The simplest and affordable way Make old doors attractive by using wallpaper. They do not necessarily have to be the same color as the walls, although this option is not excluded. First, prepare the canvas as described above, and then you can start finishing.

The procedure for wallpapering doors is as follows:

Photo wallpaper

Modern photo printing allows you to transfer three-dimensional images onto paper. It will turn out very beautiful. Moreover, they can print any image of your choice. In general, any. Photo printing is usually done by advertising agencies, sometimes by printing houses. Contact them, explaining what you need (have a flash drive with the selected design and the exact dimensions of the canvas on which you want to print the image). Having received the required image, we glue it on the door according to the method. described above.

Wallpaper with moldings

If you stick foam plastic or polyurethane moldings, sockets, the style will completely change. This type of door will suit classic interiors or rooms, using a colorful background and a different form of moldings (with curves) can be decorated in Provence style.

The work is no different from the sequence described above. We take the prepared doors with a leveled surface, spread them with glue, and glue the wallpaper.

By leveling the panels with a rubber roller it is not difficult to achieve good results, but a certain number of small air bubbles remain. To remove them, take a special plastic spatula (any hardware store has them), and use it to finally remove the air from the center to the edges. Also, use this spatula to smooth the wallpaper joint, if there is one. It is quite possible to achieve that the joint will not be visible.

Trim the edges of the wallpaper with a wallpaper knife. This must be done before the wallpaper is softened by the glue, otherwise later it may “stretch” behind the blade and tear. Leave to dry. After 12 hours or a day - depending on the temperature and humidity in the room - you can continue decorating the old door.

Carefully apply the markings with a simple pencil. When everything is drawn, use a tape measure to measure the required length of the pieces of molding. We cut it off and file the edges at an angle of 45°. We take a suitable glue (PVA is possible) and carefully smear the back surface of the cut elements, glue them according to the markings, and leave them to dry.

Using the same principle, you can update old doors so that the style will be different. Several examples in the photo gallery.

Beautiful wallpaper with a matching pattern is the secret to the attractiveness of this door decor
Moldings were glued to the painted doors, which were then painted with “gold” paint

Designer decoration of old doors

If you are interested in designer items, you can try turning it into an art object. Good news the fact is that you don’t need to prepare it: the unevenness and sagging will be hidden under the design.

The decorating process begins with the making of papier-mâché. Take egg trays, sprinkle them with water, knead them with your fist, trying to level the surface. They will tear during the process, this is normal and even good - we need small pieces. These almost flat fragments, on liquid nails or using glue gun, glue to the surface in any order.

Used are lids, rings, a small perfume bottle, a small non-working PC mouse, the remains of a mosaic, everything that comes to hand. You will need a lot of trash, you can collect it ahead of time.

When most of the surface is “decorated”, take acrylic silver paint in cans (you need 2 pieces) and paint the decor well. When choosing paint, it is better to take an expensive one, in particular German, so that it does not crumble later.

Decorating doors using decoupage technique

Romantic or “cheerful” door designs can be made using decoupage. To work you will need:

• napkins with a suitable pattern;
• PVA glue (about 200 ml);
• natural bristle brush;
• acrylic lacquer.

We prepare the canvas as described earlier. We prime and paint it in a suitable color. After the paint has dried, we begin decorating. Take a pack of napkins you like and separate upper layer, which is with a picture.

We tear napkins with a pattern lengthwise into three strips. We tear it, not cut it. We want a slightly uneven edge. Two strips on one side have a smooth edge; we put them to one side. We tear the middle part into squares. The best option is if they are 3-4 cm on a side.

Take glue, a brush, and a small container. In it we mix PVA with water in equal proportions.

Next, we start decorating the door with our own hands. We take a strip with a smooth edge and apply it to the area to be decorated (in this case, it is the center of the door leaf). We dip the brush in glue and begin to smooth the fragment in different directions. Wrinkles will form, but this is just a good thing - the finish will be more textured, so there is no particular need to even them out. When wet, napkins are very delicate and elastic, remember this when working and act carefully.

Gradually we make a frame with one smooth edge. The second one comes out carelessly torn.

Filling the middle of the “frame”

When the entire surface is filled, leave it for a day - wait until the PVA dries. Next, take acrylic varnish and cover our decor with a soft brush. To prevent it from smelling, we use a water-based varnish. It's a little more expensive, but it doesn't give you a headache.

The beauty of decoupage is that we get beautiful things at minimal cost.

Decorating a door with self-adhesive film

Perhaps the easiest way is to update old doors using self-adhesive. All you need:

• the film itself,
• a spray bottle containing soap and water;
• plastic spatula or soft cloth;
• sharp knife (can be wallpaper).

This film is available in different options— there is a plain matte or glossy one, there is a plain one with holographic patterns, a wood look, there are even special ones for covering doors with photo printing applied.

Regardless of the type of film, it is glued in the same way. In this case, we decided to update the old doors using a photo printing option. One point: before gluing, remove handles, latches and other door fittings.

For the decor to be of high quality, the surface of the door must be clean, even and smooth. If you processed it with a sander before, try gluing a small piece of film. If it sticks well, everything is great. If it “doesn’t stick,” you’ll have to prime the doors and then paint or varnish them to create a smooth surface.

Take a spray bottle and evenly wet the surface of the door.

We shave the film, remove the protective layer from one of the corners, and also spray it. So, by wetting, we separate the protective paper from the top along the entire width of the film.

You should get a strip 15-20 cm wide. Do not remove any more so that the film does not stick to the canvas. We apply the peeled part to the upper edge of the door leaf (or the area to be decorated), it quickly sticks. Try to apply it evenly right away, but the position can be corrected - that’s why we wet the surface so that the film could be moved. If you pull it, it moves little by little.

After making sure that the canvas lies flat, take a plastic spatula (for wallpaper) and smooth the surface with it, moving from the center to the edges. The goal is to remove all the air. Since the surface is wet, this is not difficult - the water displaces the air.

Everything else is simple. We pull down the protective paper, peel off the strip, glue it and so on - to the very bottom of the door. If you glued the top part for a long time, the bottom part may dry out, so periodically check whether the doors are dry and spray again if necessary.

After all the film has been glued, use a sharp knife to cut off the excess along the edges. All that remains after this is to install the fittings.

Door decor with stencils

Old doors can be updated using printed drawings. It’s just a pity that not everyone has artistic talent. But in this case, the problem is solved with the help of stencils. You can draw them yourself, or you can find an image you like, print it on thick paper, cut out the design with a sharp knife, leaving jumpers in places. Now the stencil is ready.

The disadvantage of a paper stencil is that it doesn’t last long. If you need a “long-lasting” one, you need to transfer it to a transparent thick film. The technology for cutting out stencils for door decoration is shown in more detail in the video.

The drawing can be anything. Both geometric and floral, stylized images of animals, birds, and cartoon characters are popular.

Let's look at some of the simplest ways to decorate interior doors with your own hands using scrap materials.

As you know, doors do not last forever, and anything can happen. For example, scratches, chips, and cracks often appear on the door leaf. In this case, you can repair, replace or carefully decorate, hiding all defects.

Wallpapering the door

To decorate a door, you can use not only paper, vinyl and non-woven wallpaper, but also fabric or liquid.

In this case, the canvas should be prepared by removing a layer of paint in advance, filling up uneven areas, cracks and sanding the surface.

A layer of applied primer will provide additional adhesion of the wallpaper to the surface of the door.

You can wallpaper both the entire canvas and the panels by cutting out pieces of wallpaper of a suitable size. Don't forget to choose an adhesive that matches the type of wallpaper and dilute it according to the instructions.

Wallpaper classic

Lubricate the cut wallpaper with glue and apply it to the door, making sure that there are no jams or distortions. Smoothing out the wallpaper soft cloth, roller or wide plastic spatula. Carefully trim off the excess stationery knife. Additionally, you can decorate it by gluing a frame made of foam plinth on top of the wallpaper.

While the wallpaper is drying, it is advisable to close the windows in the house and prevent the appearance of drafts and sudden temperature changes.

Textile

A door decorated with fabric looks very unusual and attractive. In addition to standard surface preparation, attention should be paid to the fabric itself, determining the degree of shrinkage.

We cut off a small piece of fabric, measure its dimensions, moisten it with water and dry it. After drying, we take measurements again, comparing the readings and finding out the degree of shrinkage. If the value is large, then the entire piece of fabric is also moistened and left to dry before decorating.

Note! You can use not only a single piece of fabric, but also cut pieces of different colors and textures. This technique is called “patchwork” and is often used by designers in interior design.

For fabric, casein glue, a composition based on CMC, as well as Bustilat or Gumilax mastics are best suited. Apply the adhesive to the fabric and apply it to the door, smoothing it with a spatula. When covering a door with fragments, it is important to ensure that they are geometric, otherwise the work will look sloppy.

Additionally, you can decorate the door with beautiful furniture nails, shiny nylon or leather cords, fabric paint, and baguette frames.

- universal. They cover not only walls, but also doors, creating unimaginable patterns and compositions. In this case, you don’t have to bother with cutting the canvases. However, the door cannot be exposed to moisture. Therefore, this method is unacceptable for decorating a door in a bathroom or kitchen.

To work, you will need a dry wallpaper mixture, several spatulas of different sizes, a hopper gun, a roller, a clear varnish, and a color scheme.

Decorate the door with a mirror

Very unusual decoration doors can be made using mirrors. Such decor will not only attract everyone’s attention, but will also visually expand the space of the room and add light. However, cutting and attaching a classic glass mirror is very inconvenient, fortunately there is an alternative - acrylic panels with amalgam, which has excellent reflectivity.

Acrylic mirrors are available in a wide range of colors. You can choose any shade you like or several to make mirror panel. Plastic panels do not break, are easy to process and attach to the door, and are light in weight. The cost of mirrored plexiglass is not the lowest, but the quality and aesthetic qualities fully correspond to the stated prices.

Thickness	Color	Trademark	Sheet size, mm	Price per sheet, rub
2	silver	SPD (Italy)	1220*2440	5950
2	silver	Plexiglas Mirror (Germany)	2050*3050	11150
3	silver	PLASKOLITE (USA)	2050*3050	14000
3	gold	PLASKOLITE (USA)	2030*3050	15700
3	gold	Plexiglas Mirror (Germany)	2030*3050	16000
3	red, blue, green, orange, yellow, black (color opaque)	Extruded acrylic glass ZENOCRYL OPAQUE XT	2050*3050	10989
3	colored transparent (red, orange, yellow, light blue, blue, green, purple)		1220*2440	5453
3	fluorescent transparent (yellow, pink, brown)	Cast acrylic glass ZENOCRYL TRANSPARENT	1220*2440	5075

Before attaching the mirror plastic to the surface, you should carefully level the surface by deepening the heads of the nails, sanding off and covering with putty all the irregularities/recesses.

A primer must be applied to the door and the back side of the acrylic sheet. deep penetration. After it dries, the cut panels are fixed double-sided tape and assembly adhesive. For convenience, use mounting suction cups; with their help, it is much easier to carefully glue the panels to the door leaf.

As one of the decoration options, you can consider shaped acrylic mirrors. Such a mirror can be attached in the center of the door or you can purchase several elements and arrange them beautifully. Usually small parts are produced with an adhesive layer already applied.

Even from this simple material, like buckwheat husks, excellent work is obtained. The cost of the material is minimal, but the service life of such a coating, unfortunately, cannot be called too long.

Step 1. Remove the existing layer of old paint from the door vinyl covering, we eliminate all irregularities with putty.

Step 2. Remove the door from its hinges and place it on the floor/stools/table. We paint the door leaf with dark brown paint. If there is one on the door glass inserts, we protect them with masking tape.

Step 3. Thickly coat the dried door with PVA glue, lay out the husks, distributing them with your hands. If necessary, add small gold sparkles.

Step 4. Cover the door with transparent varnish (glossy or matte). It is advisable to apply three layers in order to properly fix the buckwheat on the door leaf.

Beautiful door ready. To prevent the door from being knocked out general design room, decorate the picture frame in the same way and place the creation on one of the walls.

Decorating the door in vintage style

Vintage is sophistication and sophistication, the beauty of artificially aged things, in harmony with the chic of individual decorative elements. A door in vintage style will become a work of art, an exclusive element of the interior.

For decoration you will need:

We will combine painting the door with the decoupage technique and in addition we will add decorative elements. We will carry out the work on a door that has already been removed from its hinges, puttied and carefully sanded, and laid horizontally.

Step 1. Paint the door white. Apply the paint with a wide brush with stiff bristles in one direction, in a thin layer.

Step 2. When the paint has dried, carefully sand it with coarse sandpaper, achieving an “antique” effect.

Step 3. We begin decorating the panels or the central part of the door. We tear music books and old newspapers into small pieces with our hands. Draw a rectangular or activity field on the door with a pencil. square shape. Lubricate the outlined areas with PVA glue. Immediately lay out the paper chaotically, smoothing it with your hands. Apply clear varnish in two layers on top.

Step 4. Along the perimeter of the areas covered with paper, we attach a black baguette with mounting glue.

Additionally, you can decorate with a beautiful wreath, a large lace bow or plastic beads imitating pearls (adhesive-based).

There are many other ways to decorate doors. Use the materials available in your home arsenal, use your imagination and create your own masterpieces.

Prices for entrance doors

Entrance doors

Video - A variety of ideas for decorating doors

Video - Applying patina to the door

Video - Decorating the door yourself

11 best manufacturers of interior doors

	Photo	Name	Rating	Price
#1		EL"PORTA	⭐ 100 / 100
#2		TRIADOORS	⭐ 99 / 100
#3		STATUS	⭐ 98 / 100
#4		SOFIA	⭐ 97 / 100
#5		ART DECO	⭐ 96 / 100 1 - vote
#6		PROFILDOORS	⭐ 95 / 100
#7		ONYX	⭐ 94 / 100
#8		BELWOODDOORS	⭐ 93 / 100
#9		MATADOOR	⭐ 92 / 100
#10		VOLKHOVETS	⭐ 91 / 100
#11		ALVERO	⭐ 90 / 100

Doors el'PORTA

Doors el'PORTA- these are doors with Italian architecture, produced in Russia. Models modern design and trendy shades, materials highest quality. el’PORTA interior doors are produced using modern Italian and German equipment. Various decorative coverings doors allow you to choose the best option in terms of price and performance characteristics.

Doors EL'PORTA

Characteristics:

• 3D-Graph - structural decorative material increased density. It has a pronounced texture and average wear resistance;
• eco-veneer is a vandal-proof decorative material that imitates the cut of real wood. High wear resistance, resistance to mechanical damage, fading, moderate resistance to humidity;
• aqua doors - doors that are not afraid of moisture;
• enamel is a multilayer material that imitates enamel, but has higher properties.

Doors EL'PORTA

- each product is an effective combination of the priorities of modern materials, trouble-free fittings, successful structural and design solutions. Such doors are very appropriate in rooms decorated in modern high-tech or minimalist styles.

Characteristics:

• modern innovative coating Renolit (Germany) is distinguished by its strength, durability and environmental safety;
• low maintenance requirements. It is enough just to wash occasionally with ordinary furniture care products (not containing abrasives);
• doors can be installed in any room, even with high humidity;
• easy to use, durable and reliable.

— stylish minimalist design will appeal to the modern city dweller. A wide selection of textures and finishing options allows these doors to harmoniously fit into a new, as well as an already finished interior. Telescopic door molding- This constructive solution door frame, allowing it to be adjusted to a wall of any thickness.

Characteristics:

• Due to the telescopic effect, the design is suitable for walls of any thickness. Thanks to a tighter fit to the wall, the box does not warp over time;
• harmless material based on polypropylene;
• Spliced ​​solid Angarsk pine is used to ensure the stability of the frame, low weight of the canvas, as well as the environmental safety of consumers.

— Sophia doors are an original, designer product, impeccable European quality and prompt service. Factory “Sofya” performs full cycle creating a product from developing the design of each door collection with Italian designers, developing manufacturing technologies with German engineers.

Characteristics:

• painting doors using safe acrylic-based components, which are used in the medical industry;
• absolute precision in execution of all joints in the most unusual collections;
• careful selection and research of materials used;
• environmentally friendly, strong and durable in use.

- Design by ARTDEKO direction - these are interior doors for true connoisseurs of beauty and comfort. Warm shades natural wood, exquisite shapes, luxurious decor of classic doors will become a real decoration of the interior. Manufacturability and laconic forms of doors in modern style- example high design for adherents of minimalism.

Characteristics:

• wood veneer is used valuable species, such as oak or ash;
• inserts made of transparent, frosted, colored or patterned glass;
• are manufactured on high-tech equipment by qualified specialists using high-quality raw materials and materials.

— this type The door design is a collapsible structure made of individual elements (tsars). The main advantages of this design are its high maintainability, thanks to the ability to replace any part of the door during operation and a huge range various models, both in modern and classic style.

Characteristics:

• resistance to chemical and physical influences;
• a distinctive feature of the coating is its pronounced deep “brushed” structure with a glossy varnish plain surface or a matte varnish plain surface;
• equipped with German hinges “Simonswerk” and a German lock “KFV”.