How to fill a snow slide. How to fill a winter wooden slide

Sledding down a hill, skiing and skating, building snow castles - these are not all the entertainments that winter gives a child. If parents want to give their child real pleasure, then they definitely need to learn how to make a snow slide in their yard.

Snow slide: making a winter attraction

For construction snow slide All you need is a little intelligence, a free flight of imagination and a couple of available tools that are sure to be found in every home.

Tools:

• metal or plastic shovel;
• scraper, construction spatula;
• spray;
• buckets and watering cans.

Usually, to build a full-fledged snow slide, a small shovel is enough, which will help form the basis of the future structure, as well as several spatulas for leveling the surfaces. A metal or plastic bucket and a pair of warm mittens will come in handy. However, depending on the complexity of the work, conditions and circumstances, you can use any other convenient one at your own discretion.

Engineering and Safety

Figuring out how to make a snow slide is not at all difficult. However, before you begin, you need to pay attention to some “secrets of engineering” that will help make the structure stronger, safer and more durable.

1. First, you should choose the optimal location to place your homemade attraction. Naturally, the longer the slope, the more fun the ride will be.
2. In order to avoid problems with filling and freezing of water, it is better to make the slope of the slide more gentle.
3. To protect children from injury, it is necessary to arrange a rollout onto a flat area, the plane of which will ensure uniform sliding until it comes to a complete stop.

How to make a snow slide: construction technology

Before you begin specific actions, you need to protect yourself from frostbite by protecting your hands tightly and, if necessary, wearing warm mittens on top.

Optimal conditions for building a snow slide come with the arrival of a thaw. As soon as the temperature gets as close as possible to zero, and the snow becomes more tenacious, it is necessary to roll large balls, laying out the base of the future structure, according to the planned parameters and dimensions.

How to build a snow slide that will be comfortable and safe for a child? To do this, you need to take care of preparing a ladder that will help you climb to higher ground without any problems. You can make an impromptu ladder from the same snowballs laid in the form of steps. A smooth surface of the steps can be formed without any problems using a spatula or scraper.

It is better to fill the snow slide with the arrival of severe frosts. Moreover, this must be done by evenly watering the surface of the slide warm water from a watering can. In this case, small depressions may appear that will have to be lightly patched with snow and smoothed with a spatula.

Parents who know how to make a children's ice slide correctly never build it without curbs. This allows you to increase the safety of the structure and leave the kids alone to have fun without fear for their health.

Secrets of creating a route

Having familiarized yourself with the basic recommendations on how to make a snow slide, you can move on to studying the technology for creating an ice path. First, you need to carefully compact the snowballs, forming a smooth, dense surface for the future descent. You can compact the surface with your feet, a shovel, a small log, or any other available means.

The angle of descent should be done based on the age of the children. For children under 3 years of age, the angle of the inclined path should be no more than 30 degrees. Parents who want to learn how to make a snow slide for older children should be advised to make the descent steeper, otherwise the children may quickly get bored with the fun.

Preparing the Base Ice Layer

The first layer of ice is the most important start when building a snow slide. Its correct formation becomes the key to creating ergonomically thought-out descents, precise slopes and turns.

It is convenient to create a base layer of ice using a regular home sprayer for spraying plants. The water in the spray bottle should be warm. Otherwise, the slope will freeze too quickly, resulting in uneven areas. The first layer of ice crust should freeze for at least an hour.

How to make a snow slide with your own hands? Filling with water

It is convenient to fill the main layer of water to form a full-fledged ice slope using a small bucket, or better yet ordinary water the container should, again, be warm, this will make the surface of the descent smoother. However, you need to try not to overdo it, because when filling the slide, you can frankly throw all your efforts down the drain.

In order for the surface of the descent to be completely seized by a strong ice crust, children should not be allowed to descend until the next morning. To finally secure the surface, it is necessary to splash several buckets of water onto the slope of the structure early in the morning.

Eventually

How to make a snow slide for a child? When performing such a task, the main thing is to have a reserve of strength and time sufficient to form a full-fledged snow mountain.

In order not to fly off the slide, it is better to make the descent in the form of a groove with strong, high curbs. Similar to the descent, the surface of the curbs must be evenly doused with water from a watering can, bucket or hose.

Once you find out how to build a snow slide, you will probably want to make such a structure in your yard. If you also involve others in this process - parents and children, then you can turn the construction of a slide into quite an exciting event. As soon as the slide is completed, you can safely convene neighborhood kids from all over the area, who will happily test the structure for strength.

Usually filling a small snow slide on our own, even without outside help, is not difficult. Depending on the number of participants at the event, the work may take from several hours to several days. However, the work expended will not go unnoticed. Until spring, children will be able to have fun and spend time in the company of their peers without leaving their own yard.

1. First of all, make sure that you have all the necessary items available. This includes shovels, watering cans and buckets. If you have all this at your disposal, then the next step is to find people who will agree to help you in this difficult matter. This is where you can motivate people. We can say that this “attraction” will be able to please everyone in the yard, and not only children, but also adults will be able to ride it. You will see, after an hour of active searching, you will find like-minded people.
2. People gathered, all the necessary items for organization labor process are available, which means you can get started. First, collect a large pile of snow in one place. You can clean the area and dump all the snow in one place. So the benefit will be great, since you will help the wipers in this case, and you will be able to collect a large pile of snow in order to create a slide.

3. Compact the collected snow very tightly. The height of the snow slide should be such that it is comfortable for both adults and children to ride on it. It is important that it is very comfortable not only for children, but also for adults in this case. If you can’t assemble the snow slide, ask a person with a snowblower to help you. I think that he will not deny you this pleasure.

4. Having poured a certain amount of snow onto the hill, and then compacted it, level its future descent. It is important that it is as smooth as possible, so manually, or using a shovel, remove all unevenness visible to the eye. Don't forget to make a step for your slide. Otherwise, how will you climb it? The steps should be as level and gentle as possible. This is very important if you want to keep your health and the health of other people safe and sound.

5. At the same time as leveling the slide, compact its edges so that it does not crumble at the first contact with your hand. It is best to make a low side along the edges of the slope, which will prevent you from sliding down the hill in the wrong place. In this case, this will help prevent all kinds of injuries when biting and climbing a hill. Be careful!

6. After the slide has already been formed, you can start pouring it! It is important that you stay on the street subzero temperature in the process of applying the final touch. It will be best if you water it at night. It is best to water from a watering can or bucket. But it’s better if you water the slide from a watering can, because it will give the slide an even descent and create a lasting impression of the process itself. Thus, by filling the slide at night, you will protect it from unauthorized persons. It is unlikely that it would occur to anyone to dark time days to climb a hill, and even more so to ride it. After all, your neighbors are far from stupid people.

A DIY snow slide is an ideal activity for adults and children. After all, you only have to spend a few hours building the structure.

But your kids will have a wonderful ice attraction for the whole winter.

Let's start together

How to fill a snow slide? For this you need very little - snow, desire and enthusiasm. Well, also a few working hands. It’s good to involve the kids in this matter. After all, a snow slide made with your own hands will be especially loved if a piece of your labor is invested in it. Younger children can be assigned the simplest and most basic work, for example, bringing snow in children's buckets or rolling snowballs. Older children can be challenged by building steps. Well, you can even trust more experienced people to fill the descent with water. Believe me, the kids will remember the process of building a slide from ice and snow for the rest of their lives. It's so exciting!

Necessary equipment

Before building a snow slide, let's prepare the tools and equipment that will be needed for the job. There must be a lot of snow so that it can be used to build a frame and steps, and also add slides during operation. You also need to prepare:

It is advisable to equip the kids well who will help you during construction. After all, the main thing in this matter is not to get sick, and not just to solve the question: “How to fill a slide with snow?” Therefore, it is better for children to wear waterproof overalls and also stock up on several pairs of mittens. Make sure that the little ones don’t sweat or loosen their clothes, otherwise it’s very easy to catch a cold.

Specifications

Any construction project must have its own parameters. They depend on the age of those who will ride on the homemade slide. If these are teenagers and adults, you can safely build a slide one and a half to two meters high. If kids will ride on this snow attraction, then the height of the slide should be no more than one meter.

The length of the descent, to make it easy and safe to ride, should be about 5 meters. It is very important to calculate the angle of descent. The slide should not be made too steep; the slope should be about 40 degrees. If you make it bigger, then the pleasure from

there will be less descent, and at the end of the descent on a steep hill the child may receive a noticeable blow. But a slide that is too flat will be uninteresting, because then the speed of the slider will significantly decrease.

The width of the slide should be sufficient to allow you to slide down it on a sled. This is about half a meter, no more. Having thought about how to fill a snow slide, do not forget about the sides on the descent to ensure safety. Otherwise, kids risk falling before reaching the end.

Don't forget about reliable steps - they will make it easy to climb the hill, and if you sprinkle them with sand, they will no longer be slippery.

Benefits of a snow slide

If you make a slide at the beginning of winter, then throughout the snowy season it can be improved and modernized by adding arches, turns, making branches, adding snow sculptures and decorating it. The advantages of this design are obvious:

• construction can be carried out with children of all ages;
• no special costs on expensive materials or no specific tools are required;
• You can experiment and apply your own design.

Before you fill the snow slide, you need to choose a convenient place. It is very important to place it away from the roadway and away from paths. See how well it will be lit in the evening, because it gets dark early in winter. Choose its location so that there are no bushes or trees nearby, no fences, hatches, poles, or anything that could pose a danger to those riding.

Shovels in hand - and forward

It’s better, of course, to guess when a relatively warm day will arrive. Then the snow will be sticky and the construction process will be much easier. How to make a snow slide? First, let's roll up a few snow globes different sizes. We place the largest one at the base, then we install a smaller ball and so on until the descent. We fill the empty space between them with snow and compact it tightly.

Then we form the steps. They should be wide enough and not too high. It is recommended to lay sheets of plywood on the descent line - then the surface will be even and smooth. The plywood should be covered with snow and the surface should be compacted tightly to a thickness of approximately 10-15 centimeters. Then, after filling with water, the slope will not sag and no holes or bumps will appear on it.

Fill several times

When the frame of the slide is ready, all that remains is to fill the slide with water. It is best to repeat this several times over several days so that the ice layer is strong.

Otherwise, the sled will quickly break the ice. Do not pour water in a strong stream so as not to wash away the snow; do it carefully and slowly.

If it’s already frosty outside and it’s impossible to choose a warm day to build a slide due to meteorological conditions, then plywood and wooden shields You can install formwork and pour snow into it.

It will also be convenient to cut snow bricks from snowdrifts that have been well compacted. They are placed, for example, at the base of steps.

Initially, the steps should also be filled with water - then they will gain strength and will not crumble underfoot. As soon as they are well frozen, they must be sprinkled with sand so that the children can climb them without fear.

Think about the top platform of a snow slide. It should be level, safe and relatively large so that the child does not fall off it. You can also lay boards or plywood on top of it. But be sure to ensure that the platform is not slippery.

You can make two descents from one site: one steeper, the other gentler. Don't forget to decorate your slide with an arch or a funny snowman - your attraction should be not only functional, but also aesthetically attractive.

Winter has come! There was snow...... I was walking with my daughter and realized that something was missing!... Well, of course, roller coasters! Winter has come!
There is snow......
I was walking with my daughter and realized that something was missing!…. Well, of course, slides!

And so, I gathered my neighbors - dads. We picked up shovels and did two useful things:

1. Fun for kids - a snow slide.
2. Cleaned up the parking lot.

Now about how it all happened:

1. Necessary tools

- shovels;

— a scraper for clearing snow (not necessary, but it makes life easier, I even have wheels, for cleaning the garage);

- spray bottle;

- watering can;

- bucket;

- hands.

2. Choosing a location

When choosing a place, Special attention paid attention to two things: safety and lighting, i.e. a place where children, when driving down the mountain, will not fall under the wheels of cars, and which is illuminated in the dark.

3. Direct construction of the mountain

After choosing a place, we asked the owners of the cars parked nearby to temporarily move them and make room for us. After there were no cars left on the site near the planned location, using the above tools (namely shovels, scrapers and hands), they cleared the parking lot, “storing” the snow in the designated location down the hill.
The result was a blank slide. After which it must be compacted.
If the snow is “sticky”, then you can form a slide without shovels, and roll it up snowballs(balls). Place them together in several layers, fill the gaps with snow, and, as in the first case, compact them.
They did not make the slide high enough to make it more comfortable for mothers. The result was 1.5 meters. In addition, three pieces of old plywood were laid on the upper platform for descent (actually, what was not a pity) so that it would not be slippery to stand on top.

4. Creating a “track”

After constructing the mountain, it is necessary to make a “track”, “path”, “descent” (whatever you like), along which the children will slide down.
It wasn't difficult. After which the descent was also compacted. At the same time, the angle of descent was made minimal (taking into account the fact that our children are 1-3 years old), 25-30 degrees.

5. First layer of ice

The first layer is probably the most important, i.e. we form the descent surface, the angles of inclination and turns.
So for this, the simplest home sprayer for spraying flowers was used. They poured it in warm water(precisely warm, so that it does not freeze immediately) and sprayed the entire descent.
Left to freeze for about an hour.

6. Install the plywood platform

While the descent was freezing, they made a plywood platform (see point 3)

7. Fill the slide with water

Using a garden watering can, we poured warm water over the entire slope and sides of the slide, which makes the ice smoother and avoids unevenness. But not hot, otherwise everything will melt. Then we left the slide overnight so that it “set.”

In the morning, with a broad gesture, they threw several buckets of water on her (to secure it).

9. Make steps on the slide

Steps were made on the back side of the slide, using old wooden slats(to avoid slipping). It was possible to make handrails, but we couldn’t find the material.

So, the next day the slide was ready and tested (to the cheerful cry of the children) by the dads. Three have a fun day the kids couldn't be picked up from the slide. We rode on butts, legs, plywood, etc., and one of the dads even brought out an inflatable ring, like in a water park. The children woke up and asked to go outside...