Chair made of pp pipes. An unusual solution - furniture made of plastic pipes

What can be done from plastic pipes

Most people immediately have a question: “is it possible to replace PVC pipes with polypropylene pipes?” . You can use polypropylene pipes, only in this case we will also need a soldering iron.

Advantages of PVC pipes:
- snow-white color;
- you can connect pipes with fittings using glue, or without it at all;
- if you do not use glue, the structure will be collapsible, and like a LEGO constructor, you can use fittings and pipes to assemble other structures.
Of course, polypropylene pipes do not have these advantages.

Now, let's see what crafts you can make from plastic pipes with your own hands:

From plastic pipes you can make:

Children's high chair made of 1″ pipe

Camping folding chair made of 1″ pipe

Country tables and chairs made of 1″ pipe, for outdoor use

Greenhouses, greenhouses and light frames in beds for sheltering plants, assembled from polypropylene pipes And connecting elements- very a budget option, combining low cost and ease of assembly. If necessary, they can also be easily dismantled.

Strong and stable racks for growing and working with seedlings.

PVC pipes of a larger diameter, carefully cut out on top with a jigsaw and filled with soil are a compact and aesthetic option for planting greenery.

Children's 2-tier bed (pipes with a diameter of 3/4″, 1″ and 1 1/4″ were used)

A bed for dogs, the diameter of the pipe in this case is selected based on the size and weight of the dog.

Hanging swing for a summer house

Sleigh for housework in winter at the dacha

From the rest of the pipes large diameter, you can make a small organizer in the garage

Clothes dryer made of PVC pipes.

By attaching the wheels, we get very convenient carts.

A greenhouse made of PVC pipes will serve you long years, it does not need to be painted, and it will not rot or rust, as usually happens with greenhouses made of wood and metal.

You can assemble hydroponics from plastic pipes, but in this case I would like to note that you can use any pipes (including sewer pipes)

Children's car made of plastic pipes

Or make a pen for chickens

Shelving that can be easily assembled to any size

Collapsible outdoor tents and tents made of plastic pipes

A trellis for grapes made of plastic pipes that will always have a pleasant appearance.

Carports made of plastic pipes

Fences and enclosures made of plastic pipes

PVC pipes are an easily accessible material for useful ideas and devices on the farm. What will you need for this? Hacksaw, tape measure, glue, in some cases sandpaper.

1. Rack for drying clothes.

2. Drinking system in the chicken coop.

3. Greenhouse.

4. Shelving.

5. Bicycle rack.

6. Rack for containers with vegetables.

7. Summer velomobile.

8. Various tool holders.

10. For storing shoes.

11. Summer shower for children.

Simple designs garden furniture, assembled from polypropylene pipes, will help you pleasantly relax and unwind in shady corner garden

For example, how do you like comfortable chair models?

A comfortable sun lounger, an impromptu canopy for a morning meal on fresh air or this model of a stand in the spirit of a “life hack”, which allows you to train on a treadmill without leaving the Internet? Cheap, reliable and practical!

Children in the country are a separate topical issue. The ubiquitous children must be given the opportunity to play and misbehave in such conditions that parents can be calm.

For kids at the dacha you can put together such a comfortable playpen or a cozy one toy house. These designs can be easily transferred to the garden or veranda, and your child will always be in your field of vision.

After the construction of a water supply or sewerage system, repair work they often stay in the house or dacha Consumables – metallic profile, polypropylene pipes, fittings. Careless owners throw away excess material, and craftsmen find their own use for each element. For example, they independently develop designs and manufacture durable and beautiful furniture from PVC pipes with your own hands. Tables, chairs, shelves and organizers serve for years, delighting with impeccable functionality and stylish appearance.

In summer, comfortable chairs for children can be used in the country house or playground

DIY children's chair made of PVC pipes

Children's chair made from scraps of PVC pipes: A – seat frame and backrest, B – legs, C – stands for armrests, D – stands for backrest

Products made from polypropylene are safe, which is why they are used to make playpens, cribs, fences and furniture. One of the options is a comfortable, light and beautiful chair, assembled from modules (self-cut sections and connecting elements). The size of the chair, which is assembled according to the principle of a designer, depends on the size of the fragments. As an example, let's take the instructions for assembling a chair for a 4-5 year old child.

The material you will need is about 3 meters of plastic pipe, 6 T-shaped connecting elements, 8 corner elements, and a piece of durable bright textile. Tools – fine-toothed saw, PVC glue, sewing machine.

Operating procedure:

cut the pipe into fragments - 7 pcs. 33 cm each (A), 4 pcs. 20 cm each (B), 4 pcs. 13 cm each (C), 2 pcs. 18 cm each (D);
we assemble the back, then the seat, using connectors, we check the chair for stability;
we sew a rectangle according to the dimensions of the crossbars, bending the fabric along the edges to form holes for the modules;
we stretch a piece of fabric over the crossbars so that it sag a little;
we disassemble the chair frame and reassemble it, but using glue at the joints.

After practicing assembling a chair, try to make a table, tent or cozy house for kids.

Office desk on a plastic frame

The assortment of office tables is large: in the store you can purchase any model - from a simple tabletop with legs to complex design with shelves and cabinets. But we will not monitor the nearest markets and spend money on a ready-made table, but will make a durable and practical furniture from polypropylene pipes with your own hands.

A large and comfortable table is suitable for lessons, handicrafts, and computer studies.

Video: Laptop stands

Materials and tools

Our goal is to build a strong and stylish table with tabletop dimensions of 915x2030 mm. To make a smaller model, it is necessary to adjust the dimensions of both the top and the frame. To make the table light, despite its large dimensions, it is better to take a hollow tabletop ( door leaf) and polypropylene blanks. T-shaped and cross fittings serve as connectors; plugs will also be needed. Make sure that the diameter of the clamps matches the diameter of the crossbars.

One of good options– small kitchen or country table with PVC pipe legs

To make one table you need 12 meters of plastic pipe, cut into pieces:

5 pieces of 7.5 cm;
4 pieces of 50 cm;
10 pieces of 30 cm;
4 pieces 75 cm each.

PVC products are sold in construction supermarkets and plumbing stores. In addition to the crossbars for the frame, the following parts are needed:

5 flat top end caps;
5 caps for cups for table legs;
2 crossover (X-shaped) fittings;
4 T-fittings;
4 four way fittings.

The finished countertop is the canvas for the door, but there are other options. You can order a plastic or glass top, and also create a flat plane of the required dimensions from boards. For assembly you will need fastening materials (screws, self-tapping screws, screws and special PVC glue).

When using connectors, a welding machine is not required. Required tools:

electric saw or jigsaw;
fine-toothed hacksaw;
sharp knife for plastic;
screwdriver

Prepare all materials and tools in advance, then the assembly work will take less time.

Frame assembly

It is recommended to carry out the first assembly “dry”, that is, without using glue. First, we assemble one by one the sides of the frame on which the tabletop will rest, then the back part connecting the first two. For additional stability and strength, we attach a third leg in the center of the back. We monitor the parallel arrangement of elements.

When all three sides are assembled, we connect them into a single structure. The result should be a frame standing on five legs. After making sure that all the elements are positioned correctly and the frame is level, we disassemble the structure and reassemble it again using glue, special cement or small self-tapping screws.

Tabletop installation

Place the finished table top face down on the floor. We install the frame on top so that the flat plugs fit tightly to the surface. We mark the locations of the plugs and remove the frame. We screw the screws into the designated points and secure the plugs. We turn the structure over, put it on its legs - office table ready.

DIY furniture made from plastic pipes looks more natural if wooden table top varnish and paint the legs in a shade that matches the interior.

Video: Video for table assembly instructions

Metal shelving for the garden

For installation metal rack a pantry, utility room, boiler room, basement and even Walk-in closet

Let's try to do without welding and assemble a rack from a galvanized metal profile of a small cross-section, which is more convenient to process. We will need a tape measure for marking, a hacksaw for metal and a screwdriver, instead of which you can use an ordinary screwdriver.

On the shelves of the rack it is convenient to place jars with homemade preparations: compotes, pickles, jams and salads

To simplify the work, we make an exact sketch to which we “transfer” the installation location. Let's draw simple diagram with dimensions indicated. Then we calculate how much material – thin profile – is required. If the appearance of the rack is important, we buy a chrome-plated pipe (approximately 22 mm in diameter). For shelves, plywood (10-15 mm thick) is suitable, which we fix with self-tapping screws (8-13 mm).

Use a hacksaw to cut the pipe into fragments. One of the kit options: 4 vertical posts, 8 rear and front crossbars, 8 side crossbars.

We assemble four frames for the shelves, securing the corners with self-tapping screws or additional corner fasteners. Then we fix the frames on vertical racks- legs of the rack. back part finished design For stability, we screw it to the wall using brackets. We paint the shelving frame (chrome plated is not needed), lay out the shelves, and secure them with self-tapping screws. Convenient for storing things and workpieces, hand-made furniture from profile pipe ready.

Stylish interior elements made from PVC modules

It’s hard to imagine that amazing golden vases are made from ordinary PVC pipes

Very small fragments of plastic products are useful for decorating the interior and creating objects useful in everyday life. Using holes in the pieces, you can make several types of organizers - for shoes, stationery, toys, cleaning products. 5-15 wide elements, glued together and fixed to the wall, turn into a convenient shelf for bottles. A decorated PVC pipe with a longitudinal cut, hung above the bar counter, is a great place to store empty glasses.

Convenient shoe organizers made from large-diameter plastic pipes

To decorate your interior, you don’t need to buy expensive decor. It is enough to cut a thick plastic pipe into pieces of various lengths, paint the resulting elements in different colors, decorate them with sparkles, shells, pieces of colored glass, and you will get a magnificent set of flower pots. Plastic rings are an excellent material for creating festive compositions in the form of wall panels. Placed in its holes Christmas decorations, hearts, flowers or Easter figures - depending on the festive occasion.

Stylish shelves for towels, napkins and household items

Original and convenient organizer for stationery

As you can see, ordinary construction pipes in in capable hands become and comfortable furniture, and useful home equipment, and exquisite decor.

Video: Ideas for a house made of PVC pipes

It's no secret that after renovation work is completed, leftover materials end up in the house. Thrifty owners They are in no hurry to get rid of these things. It turns out that you can make a lot of crafts from them.

Pieces of pipes and extra fittings are no exception. Crafts made from polypropylene allow you to realize any fantasies and make useful things for household use with your own hands.

We invite you to read the article.

DIY polypropylene chair

Crafts in the form of chairs made of polypropylene pipes are easy to assemble with your own hands, for this you need to prepare:

medium-sized trimmings and fittings suitable for them;
plywood and, if desired, you can add foam rubber;
upholstery fabric;
hacksaw, stapler and self-tapping screws.

The sequence of actions when creating a chair with your own hands:

Legs are constructed from pipes and fittings using a soldering iron.
A square or rectangle is cut from plywood required size, it is covered with foam rubber and upholstery fabric. The fabric must be prepared in such a size that it can be secured with reverse side parentheses.
The seat is secured to the legs with self-tapping screws.
The back is made in the same way.

Video: making a chair with your own hands

How to use leftover polypropylene pipe materials in the garden

Crafts in the form of multi-tiered beds

DIY crafts made from polypropylene pipes turn out to be necessary and practical. This also happens when there is little space on the site. From such pipe-rolling products you can build beds consisting of many tiers.

Setting up a garden bed is not very difficult. Large-diameter pipe products are prepared for them. They are laid on the ground where they are cut top part. This is done along the entire length of the product. And holes are drilled from below at equal distances.

Blank beds are attached to installed frame, a drainage layer and soil are poured into them.

These buildings do not occupy a large number of squares, the plantings in them do not create shade for each other, and they can be easily disassembled and assembled.

ADVICE. Such a bed can be built even on a balcony, and then the house will always have its own freshly harvested greenery.

Video: Vertical bed

Alcove

These structures on outdoors require good materials for construction, and PP blanks are ideal for this situation.

The design configuration can be anything, here everyone can realize their fantasies.

Video: making a gazebo yourself

Plastic furniture

They have learned to use pipe-rolling materials in this area. Since polypropylene has a long service life, furniture made from it is durable. For those.

By adding a little imagination and creativity, you can design interesting and stylish crafts furniture that will decorate any room.

Video: furniture

Shelves for the children's room

It cannot be carried away or overturned by strong winds. This dryer can be kept outdoors all the time, and it will not rust or rot. Convenient design makes it possible to move the dryer to the desired location at any time.

Hangers for clothes

This is the simplest product, requiring only three small pieces of polypropylene pipe. Two of them should be the same length, and the third should be 1/3 longer.

These three pieces must be strung on a strong rope, which should then be tied tightly. This results in an isosceles triangle. A wire hook is attached to the top of the triangle.

Pipe-rolling materials made of polypropylene have proven themselves with the most best side. This was facilitated by environmental friendliness and durability of this material. Therefore, crafts made from polypropylene pipes are in great demand.

Simple installation allows anyone, adding a little imagination, to create a necessary household item that will be used for a very long time.

The use of polypropylene (PVC) pipes in construction industry, as well as for the transportation of liquid and gaseous substances, began relatively recently. Various trims materials remaining after completing the main work encourage craftsmen, and today designers, to find new things for them practical use. They make home furniture from plastic pipes with their own hands: cabinets, shelves, stands, chairs, tables, dryers, decor, lamps and even small structures for the country house.

Such wide popularity is dictated properties of PVC. Products from it:

They are light in weight.
Durable. The only thing to be wary of: exposure high temperatures may deform parts.
Corrosion resistant.
Inexpensive.
Easy to work with. When constructing plastic products, the diffusion welding method, gluing parts or threaded fittings are used. Depending on the choice of the wizard, you will get a permanent connection or collapsible design.
Non-toxic. This characteristic allows the use of PVC pipes for the production various items furniture for children.

Various tables and small tables are among the most popular types furniture. We suggest making a simple desktop with your own hands from polypropylene pipes and a hollow door leaf. This tabletop size will allow you to place a laptop, textbooks, notebooks, maps, diagrams, etc. on the surface. Therefore, the product can become a workplace for both a school student and an office employee.

Prepare everything you need

Tools and materials:

Hacksaw or Miter saw for cutting material the right size.
A screwdriver or hammer drill will help attach the legs of polypropylene structures to the working surface.
Threaded screws for 1.25, 1.5 – 15 pcs.
PVC glue can be replaced with small self-tapping screws.
End caps – 5 pcs.
Desk plugs – 5 pcs.
Cross-shaped plugs – 4 pcs.
T-shaped regular plugs – 4 pcs.
T-shaped four-way connectors – 4 pcs.
PVC pipe sections: 5 pcs. 0.075 m (3 inches), 10 pcs. 0.3 m (12 inches), 4 pcs. 0.5 m (20 inches), 4 pcs. 0.75 m (30 inches) each. In the diagrams, the dimensions of polypropylene pipes are presented in inches.

All T-connectors can be replaced by soldering. Please note that this will slightly reduce the final cost of the table, but its appearance will suffer.

First of all, we start assembling the left side of the frame. The assembly includes 4-way and regular T-connections, tabletop and flat plugs. All details are shown in the picture.

First we just assemble the structure to check the accuracy plastic parts. Then we disassemble it and assemble it completely, fastening the joints with glue. After using a special adhesive composition, it will no longer be possible to redo the work.

PVC glue should be applied to inner side connecting element. Check that all parts are correctly placed, only then forcefully press the pipe into the hole of the fitting connector and hold for about 30 seconds.

Attention! The adhesive is not recommended for use indoors, so instead you can seal the connection between the pipe and the connector with a screw. Also, if you do not want to erase markings from plastic pipes with acetone or another solvent, place the parts when assembling so that the markings are with back side.

At this stage, we assemble ready-made fragments of the PVC structure. It is necessary to place the ends of the polypropylene pipes with their backs into the fittings that correspond to them on the sides: left and right. Everything is shown in detail in the diagram. Assemble the fragments and check for correct assembly. Then completely disassemble and reassemble using adhesive.

Apply chemical agent on inner part first side fittings, hold the connection for up to 30 seconds until the chemical cures. Then do the same with the second side fragment of the structure. The base frame is completely ready.

Final stage do-it-yourself work - installing a tabletop on a base. Since the work surface is a hollow door leaf, care should be taken. The space inside is filled with foam, cardboard, or completely free. Inaccurate drilling can damage the entire structure.

We recommend placing the door face down on a clean, level surface. Install the finished PVC structure symmetrically - the way it should be positioned in its finished form. The table caps will be adjacent to the door.
Use a pencil to make marks where the holes should be drilled. After this, remove the base from the tabletop.
Using a screwdriver or drill, screw the screws into all marked places. If the job was easy, you can insert a screwdriver instead of a screw to widen the holes. If there were difficulties (the screw got into the bar), you will not need a screwdriver. For now the screw needs to be removed.
Place the PVC base on the door, adjust the position so that all the holes line up. Insert the screws and connect the work panel and legs.

As finishing It is better to use a varnish or paint coating. While working at the table, it will definitely get hit various pollution. Therefore, the coating will protect this furniture from rapid damage and make it easier to care for.

A chair made by yourself will delight you with its lightness, cheapness and practicality. In addition, you must initially decide what size furniture made of plastic pipes you need, and accordingly, adjust the specified parameters of the parts.

For each chair you will need:

About 3 meters of PVC pipe.
8 swivel fittings for right angle connections.
6 T-shaped connecting elements.
Glue intended for joining plastic parts: special or universal.

Attention! If you do not have sufficient experience in connecting plastic pipes, choose a non-special quick-drying one for the job. adhesive composition, A universal remedy slower action. In this case, you will get an additional chance to correct a possible error.

Hacksaw or saw with fine teeth.
Fabric for sewing the soft part of the seat.
Sewing machine.

You need to prepare with your own hands the following sizes for a 2-year-old child:

7 pieces with seat depth and width (part A) - 25 cm.
4 pieces with a distance from the surface to the seat (part B) - 13 cm.
4 pieces with armrest height (detail C) – 10 cm.
2 pieces with back height (detail D) – 15 cm.

Or, for example, for a child who is already 7 years old:

Cut the pipe according to the selected parameters.
First, assemble the part that makes up the back of the chair.
Assemble the seat and side parts.
Check the stability of the product.
Cut a strip of brightly colored cotton fabric 2 times larger than the width of the seat. Fold in half, face inward, sew, turn inside out. At both ends, tuck and sew pockets through which the pipes will be threaded - the top one for the back and the front one for the seat (like in a chaise lounge).
Disassemble the frame and install the seat in place.

The child will appreciate it new item furniture, can easily play with it. The use of plastic water pipes is absolutely harmless; they do not emit toxic substances. And reliable assembly makes the product completely safe.

Furniture for home and garden can be made not only from water pipes, but also from sewer pipes, however, the former have significantly higher environmental characteristics. Large-diameter pipes are used to create creative storage systems, original decorative objects, etc.

Plastic products rapidly burst into our lives, displacing the materials we are used to, such as wood and metal, and every day they are taking over more and more new industries. Not surprising, because the service life of such products is at least 50 years. In addition, they do not rot, do not oxidize, are not susceptible to chemical attack, and the most important criterion is that they are cheap.

Plastic is used in almost all industries. It is very actively used in construction. Any pipeline is now made from plastic pipes. The old lines have long served their purpose, and they are being replaced by systems made of polypropylene or PVC.

Contents of the article

What will you need?

Plastic pipes, intended for laying all kinds of pipelines, are often used in other industries.

Craftsmen began to make with their own hands from PVC pipes various interior items, and much more. The remains of plastic parts left after construction or repair are also in no hurry to throw away. After all, you can make a bunch of necessary and unusual things from them.

The beauty is that you don’t need special skills for this, but everything is possible. A little imagination, and trash from plastic waste will turn into an exclusive item.

You can very quickly and easily make chairs from plastic pipes with your own hands.

For this we need:

pieces of polypropylene or PVC pipes;
cross – 1 pc.;
rotation 90° – 4 pcs.;
tee 8 – pcs.;
plugs – 4 pcs.;
a piece of thick thick plywood (for the seat);
a piece of foam rubber;
a piece of fabric (for covering the seat).

First of all, we decide on the sizes. They can be taken from a chair you already have at home. According to the selected parameters, we cut blanks from polypropylene pipes.

If desired, the length of the segments can be increased or decreased - depending on the size of the product you want to obtain as a result.

Required Tools

Work with bare hands to create homemade chair– it won’t work, you will need a minimum set of tools:

or hacksaw;
stapler with staples;
drill.

Seat assembly

We start assembly from the seat. We take a crosspiece and solder pieces of PVC pipe of the required size to it. You can immediately drill holes in the pipes to attach the seat itself.

They do not need to be painted or treated with special compounds. Having such furniture at your dacha, you don’t have to worry that it will get wet on the street and rot. And the most important thing is that you can do all this with your own hands.