Threshold or non-threshold system, what to choose? Sliding doors and partitions - modern approaches to optimizing the interior of premises Sliding doors without a threshold.

We offer our clients to purchase sliding doors and partitions, which can be ordered in accordance with custom sizes their openings. Nowadays one of the most common materials is glass. Without using this profile when arranging the interior, it is impossible to imagine modern office or residential apartments.

The most practical and original solution for such premises they act glass sliding doors , photos of which will give you an idea of ​​their real appearance. These products are ideal for any design research. Another advantage of purchasing such structures is their affordable cost, proper aesthetic appearance and ease of use.

Rice. 1. Dividing a room using a glass sliding door consisting of 4 sections. Used glass processed using fusing technique with wooden frame and a panel covering the roller mechanism.

Zoning with glass sliding doors

Thanks to glass doors and partitions, you can organize a zonal division of space in the room. After all, transparent and lightweight glass sliding structures effectively divide rooms into zones and do not clutter up useful space.

Rice. 2. Glass sliding door on an aluminum frame with a rail mechanism at the top. Floor without threshold.

Applying different kinds sliding doors and glass partitions when arranging your home, you can open up a lot of possibilities in decorating its interior. Because the sliding glass doors are a combination of tinted and transparent decorated panels, such designs are often used to organize the interior space of premises. In turn, the entrance glass door additionally performs protective functions and at the same time is a decoration of any area.

Places for installing sliding doors

Looking at the sliding doors in the photo, you can make sure that they can be installed in any opening. The only question is whether there is a place where they will have to be rolled back.

Rice. 3. Double-leaf sliding door made of stained glass frosted glass wooden frame on casters hidden under the panel above the door. There are only guide elements on the floor.

Sliding doors and partitions made of glass are an excellent solution for narrow corridors and small spaces. After all, standard swing doors for such places will take up quite a lot of space and will not allow the specified square meters to be fully used.

The design of sliding doors and partitions contains several panels, through which zoning of large rooms is carried out.

Today, the entrance glass sliding door has found its application in offices, shopping centers, cafes and residential premises. The technical capabilities of such structures allow them to be used in large spaces. In particular, the width of the opening for installing these doors can reach more than 6 meters.

Rice. 4. Drawing using the fusing technique on a glass sliding door. Originally used frosted glass"triplex". Stainless steel roller mechanism.

Thanks to the installation of a glass sliding door, any interior gains individuality and at the same time creates a visual feeling of a single space.

Movement mechanism of glass sliding solutions

Installation of glass doors and partitions makes it possible to significantly save space and at the same time create unique interior. It should be noted that there are many advantages of sliding glass doors compared to swing options. Thus, one of the differences between glass sliding structures and other types of doors is the possibility of installing the former without lower guides, as a result of which the floor remains absolutely smooth.

The assortment of the Glasstroy company includes glass sliding doors with open and closed systems movements. In the production of glass doors and partitions, our company uses only strained glass or triplex. At the same time, glass doors and partitions are matte, tinted and transparent. Logos and designs can be applied to such material using fusing, photo printing or sandblasting.

Rice. 5. The sliding door is made of tempered laminated glass "triplex", which has increased strength in an aluminum frame on a rail mechanism.

What hardware is used for sliding doors?

In addition, we produce structures and movement systems for glass sliding doors using only high-quality fittings from global manufacturers.

Glass sliding design With open system movement involves moving the door along an open track attached to a wall or fixed glass. Sliding option with this system it has a modern design.

Use of sliding glass doors in construction accessories from of stainless steel allows such products to look great in high-tech interiors. Doors of this type are durable and comfortable, as well as lightweight and stylish.

Sliding glass doors with mechanism closed type equipped with a system of aluminum profiles that hide the clamping fixtures and roller carriages. A door with such a system is attached to the ceiling or wall.

It is also possible to install a glass sliding door with an automatic opening mechanism. To do this, our company’s specialists will install special device inside the system of this door structure.

Glass sliding walls

For effective zoning of space, glass sliding walls can be used. The company "Glasstroy" is engaged in the production of these lightweight transparent structures. They are the ones who will become excellent functional solution, through which you can temporarily delimit the room. We offer ready-made designs glass sliding walls. Also, our customers can count on the embodiment of their individual projects in life.

Glassstroy specialists will provide assistance in choosing interior sliding doors. At the same time, you will be pleasantly surprised by our prices. Along with the fact that the entrance glass door provides high level protection, it is also a great decoration for any office.

In the manufacture of glass sliding doors, various decorative technologies. Installing such solutions in your office will make its interior unique. The participation of our specialists in the selection of sliding glass doors will allow us to find the most suitable designs for your environment.

Glass surface decoration

Modern technologies for the production of glass doors and partitions allow you to choose any color for such structures. It is also possible to engrave the glass or paint the glass solution in the desired tone.

Rice. 6. For the sliding door, stained glass was used, obtained using a set of glasses with different mattes.

Sliding glass doors from the Glasstroy company can be made from combined materials. Price interior doors This type depends on the materials used for their production and the complexity of the decor.

Our qualified employees are able to install glass sliding doors and configure their mechanisms. At the same time, we provide a quality guarantee for our work.

Sliding glass doors

During the opening process, these structures roll to the side. This happens through their movement in the direction of the fastening profile, which ensures the movement of the doors along the wall or partition.

To significantly save space and visually expand the space, glass sliding solutions are the best option. And to further optimize the situation, you can apply a design or decoration to the door. As a result, the interior of the room will gain elegance and originality.

Advantages of sliding glass doors

The use of sliding glass solutions saves space. At the same time, such products are silent and lightweight. Thanks to them, light is added to the room.

Besides, sliding glass doors They are convenient and safe to use. After all, at the moment of opening, the glass profile itself does not shift towards the person. Therefore, it cannot cause injury, even if children want to use it.

Sliding glass doors can decorate any room. We can make a door of any shape and color. Our specialists also produce matte, transparent and tinted designs, which can be offered complete with a mirror, colored or patterned glass. Along with this, you can decorate doors of this type using fittings.

The versatility of glass sliding doors makes it possible to install such structures in offices, shopping centers, residential apartments, airports, banks and train stations. Also, these door solutions can be used in dressing rooms, offices and swimming pools. Thanks to such glass structures you can separate the kitchen, balcony or storage room from the bedroom or living room.

Rice. 7. Sliding door on a rail mechanism made of solid tempered frosted glass.

An important quality of glass doors is resistance to moisture. This allows you to install these products in bathrooms, baths and saunas.

Although glass sliding doors can divide a space, they also provide a lot of light inside the room itself. Other valuable characteristics of such products are their reliability and durability.

What kind of glass is used in doors

In the production of glass sliding doors we use tempered glass or triplex, since these materials are quite durable.

Another advantage of such doors is their ease of installation. To move the glass sheet, a mechanism is provided based on rollers placed on top. After installing doors of this type, the floor covering remains free of unnecessary parts and is safe for people to pass through.

To determine the price of glass sliding doors, you should take into account the cost of fittings and types of glass decoration. You can find prices for glass doors in our catalogue. Glasstroy company specialists are able to produce glass sliding doors according to an exclusive project in accordance with the wishes of customers.


And I think this is better
But I believe that it is better to entrust such a matter as the installation of sliding doors to a specialist. Not everyone has golden hands, and you can make mistakes somewhere. Then you'll have to redo it.

Advantages of sliding doors:

Saving space (space) indoors;
absence of thresholds (for “no threshold” systems);
ease of door production;
convenient for people in wheelchairs.

Do-it-yourself interior compartment doors (installation of interior doors instructions):

Installing a sliding door is not at all difficult, the main thing is to maintain accuracy in calculations and accuracy in work.
Sliding doors with bottom guide roller
What materials do we need:
door leaf (its dimensions should exceed the doorway by 5-7 cm in both width and height);
set of fittings for sliding doors: guide strip (metal), rollers, fasteners;
wooden block length equal to double the width of the canvas and size 50x50 mm;
two cash registers (the first is on the side, and the second will be on top door frame);
a box-shaped stand, the door will be adjacent to it in the closed position;
two extras;
door handles;
anchors for attaching the timber to the wall;
self-tapping screws;
finishing nails for cashers.

1.

2.

Instructions for installing interior doors with your own hands (you can watch a video of door production on the Internet, and also download the door - photos and finishing options).
Fasten the guide bar to the beam with self-tapping screws. To do this, you need to pre-drill holes in the metal strip for self-tapping screws at a distance of 20 cm from each other.
At the bottom of the door leaf, select a groove in which the guide roller will ride. It is designed to ensure that the bottom of the door does not deviate when moving. If you don’t have a milling cutter, you can use a wood pen. Very carefully, hole to hole, then use a chisel to clean out the excess.

We fasten the block with the guide bar precisely and strictly horizontally. If you make an error, the door will open or close on its own. Install the rollers into the guide. Attach the lower guide roller to the floor. It is very important that it is installed exactly under the top strip, otherwise the door will not remain vertical. You “put” the door leaf on the lower guide roller, give the leaf a vertical position and fasten it on the upper rollers. To prevent the door from moving beyond the guide bar, install stops.

Install the box-shaped stand vertically, on the side of the door frame. Attach it to the wall using metal corners, which you cover with additions.
Nail the cash strips to the side and top of the doorway with finishing nails.
Install door handles. Attention, the handles are attached after final installation doors to avoid alterations.

To make sliding interior doors fit more tightly, you can stick dust covers (dust brushes) on them, just like on sliding wardrobe doors.

Sliding doors "without threshold".

The operating principle of a sliding interior door “without a threshold”

The advantage of sliding plastic doors“without a threshold” is the absence of any grooves or rails on the floor (under the sliding doors). Sliding doors are attached only from the top. Thus, it is possible to do without disturbing, altering or modifying the floor covering.

We will need:

Door leaf for sliding doors. It is important that it is wider and higher than the doorway;
a metal strip more than twice as long as the width of the doorway;
anchor (for attaching a metal strip to the wall);
bearings (2 pieces - exactly 2 pieces, not 2 doors);
metal strips (4 pieces) and bolts (for hanging the door on metal strip). Alternatively, if you find it, you can use U-shaped metal strips (2 pieces) to attach the bearings to the door;
door handles.

Installation of interior sliding doors “without threshold”.
Sliding Door Bearing Mount

1.

2.

3.

1. Screw the metal strips strictly perpendicularly to the plastic door.
2. Using a bolt and four nuts, install the bearing.
3. Try the doors to the doorway so that you can drill holes for the anchors at the required height with a hammer drill.
Attaching a sliding door to a metal rail
4. In order not to keep the door suspended, place something under them that will fix the sliding door at the final height from the floor.
5. Insert the anchor. We attach a metal strip to one of them. We thread bearings onto the rail with a door attached to them. We lift the door and screw the second anchor to the metal strip.
6. At the very end, screw in (if necessary) the door handles.
7. To make the doors move more quietly, you can stick a strip of rubber on the metal rail (on top) (for example, by cutting it out of a car inner tube).

A DIY door installation video will help you understand the described processes in more detail.

Read more about how to embed a lock into a wooden door.
Interior sliding doors.

IN modern conditions, when the square footage of the apartment does not allow for large-scale ideas for remodeling the apartment, the installation of sliding interior doors becomes very relevant. Compared to conventional swing doors, they have a higher price, but their financial component will not play a significant role in the awareness of their undeniable comfort and modernity. In fact, sliding doors significantly save space in the apartment, because, unlike regular doors they move apart along the wall, and thus visually make the interior spaces larger than they actually are.

In addition, the advantages of sliding doors are expressed in the ability to conveniently divide even a room space into several isolated rooms. For example, in a small apartment, where often one room can have several functional meanings, you can separate the bedroom from the living room (in case you have guests), or the living room from the kitchen (in order to prevent odors from cooking from spreading into the adjacent room). One more big advantage is their functionality in that when installing them there is no need to change the dimensions of the doorway; sliding doors are always a few centimeters larger than it. And if you came up with the idea of ​​installing traditional swing doors, you would probably have to order the door according to individual order, adjusting it to the dimensions of the doorway. What else can you say about sliding doors?

They do not tend to creak (unlike swing doors, in which this problem is always solved by lubricating the hinges machine oil or other lubricants) open smoothly and very quietly. This also matters if you have a habit of getting up often at night, disturbing your loved ones.

While paying tribute to the advantages of sliding doors, one cannot fail to note some of their disadvantages. First of all, this concerns poor sound insulation. If you are a big lover of peace and quiet, then any sounds due to closed doors will be heard as clearly as if you were near a television, tape recorder or other source of noise, animate or inanimate. Secondly, over time, as the frame dries out, sliding doors can open and close on their own. The same thing happens if they are installed incorrectly. Thirdly, you can always use such doors to safely pinch the upper or lower limbs, which often happens even in normal situations.

But anyway, modern look that sliding doors give to your interior, and their functionality, play a decisive role in their choice, even with some of their shortcomings.

Installation of interior sliding doors

I really like sliding doors or sliding doors. They save useful space, which is why almost all the interior doors in my house are like this.
Their only disadvantage is that they do not insulate the room as tightly as swing ones. But can it really be considered a minus when barely discernible appetizing smells begin to seep out of the kitchen? You immediately understand that they will soon invite you to the table, and you can begin to work up an appetite.

It is not difficult to install such a door yourself. The main thing is to be careful in calculations and work. I installed the first door for about 9 hours, but spent only 4 hours on the second. The experience gained shows.

Availability of materials and tools is important:

Door leaf (should be 5-7 cm wider and higher than the doorway);
- a wooden block 50X50mm and a length equal to double the width of the canvas;
-a set of fittings for sliding doors (available in almost any furniture store: guide strip, rollers, fasteners);
- cash register 2 pieces (one will be on top of the door frame, the second on the side);
- box-shaped stand (the door is adjacent to it in the closed position);
-two extras;
-door handles;
- self-tapping screws, anchors for fastening the timber to the wall, finishing nails for casing.

I use self-tapping screws to strengthen the guide bar to the beam. The strip is metal, so I pre-drill holes in it for self-tapping screws at a distance of 20 cm from each other.

IN door leaf From below you need to select a groove in which the guide roller will slide. It serves to ensure that the lower part of the door does not deviate when moving. I don't have a cutter, so I used a wood pen. Carefully, hole to hole, then cleaned out the excess with a chisel.

The block with the guide bar is attached strictly horizontally, otherwise the door will either open or close spontaneously.
I install rollers in the guide. I secure the lower guide roller to the floor. It is important here that it is secured exactly under the top bar, otherwise the door will not be installed vertically. I “put” the door leaf on the lower guide roller, give the leaf a vertical position and strengthen it on the upper rollers. To prevent the door from moving beyond the guide bar, I install stops.

Our company operating in Moscow offers its customers only high-quality products from well-known manufacturers.
Plastic balcony doors have a number of advantages: they are more durable and reliable, in addition, they are much cheaper than other materials, for example, wood.

It's easy to work with us!

  • Call
  • Metering
  • Agreement
  • Manufacturing
  • Delivery
  • Installation

Modern developments make it possible to produce PVC doors balcony different forms And color solutions, which will look good in any room, taking pride of place as the highlight of the interior.

In addition to all of the above, such door designs have excellent sound insulation and thermal insulation properties, which is a tangible advantage in our climatic latitudes.

PVC balcony door designs

For example, these can be plastic doors without a threshold or PVC balcony doors with glass, which can be tinted, energy-saving, armored, or with varying amounts cameras, these are often used for plastic entrance doors. It should be noted that the doors can be completely filled with double-glazed windows, which increases the amount of light entering!

Choice of door PVC balcony The designs we offer in Moscow are very large, the price can also vary greatly. But rest assured, our consultants will find best option for any size family budget, and will also satisfy the needs of even the most demanding customers. Eg interesting option arched door made of plastic.

It must be emphasized that plastic doors are resistant to various irritants: alkali, acid, precipitation; in addition, plastic is difficult to ignite.

And most importantly, polyvinyl chloride is completely environmentally friendly for both humans and the environment.

Buy PVC doors for balconies in Moscow

When carrying out repairs in houses and apartments, everything more people install interior doors without thresholds. It's stylish, comfortable and modern, but there are a few downsides. Cold, noise and odors pass through the gap between the bottom edge of the door and the floor. CASSETON offers unique solution This problem is solved by automatic thresholds for interior doors.

What it is?

These systems are mounted at the bottom of the door and are designed to bridge the space between its edge and the floor covering. The seal moves out and touches the floor when the door is closed, and when opened it rises back. An automatic door threshold provides a number of advantages:

  • prevents the penetration of moisture, smoke and odors into the room;
  • increases sound insulation;
  • eliminates drafts and increases thermal insulation;
  • does not require special care;
  • does not create obstacles when passing through the door, as is the case with traditional thresholds.

During the renovation, you can also lay solid flooring without noticeable transitions or thresholds.

Distinctive features of automatic thresholds

We offer you to buy automatic thresholds for interior doors of any size and configuration. They are usually made from aluminum profile with built-in rubber seal and springs. There is a start button on the end of the canvas on the hinge side. When it is pressed, the spring is activated and pushes out the seal, and this happens silently. The gap between the floor and the door closes.

These automatic systems very durable and can withstand tens of thousands of door opening and closing cycles. Depending on the height of the clearance, the height of the threshold can be adjusted so that it fits snugly to the surface.

We can install automatic thresholds not only in the doors of your apartment or house, but also in commercial premises, be it a store, kindergarten, office or medical facility. The absence of a traditional protruding threshold in these cases increases the convenience of people's movement, and the invisible automatic threshold for doors eliminates the penetration of cold, extraneous noise or odors from neighboring rooms.

How to buy a suitable threshold?

Automatic thresholds for any wooden doors CASSETON offers you. Our measurer is ready to come to you at any address, after which the necessary installation work. When you contact us, you receive a number of advantages:

  • reasonable prices for automatic systems;
  • the ability to select thresholds for doors of any size;
  • professional consultation;
  • possibility of ordering installation.

We take an individual approach and care about the company's reputation, so we only sell quality systems and install them responsibly. You will definitely be pleased with the results!

Modern design interior spaces very often suggests that we get rid of large quantity partitions. This action pursues two goals - to increase the living space and combine seemingly completely different ones into one whole. functional areas. At the same time, there are times when you are faced with a task of the opposite nature - to install a partition (to divide large room into two small ones, to separate the space in the room for a dressing room, in large corridor– under the pantry, etc.).

Advantages and disadvantages of sliding doors

The advantages of sliding doors include, first of all, saving space in the room. For swing doors, the area required to open them freely is always calculated. This space should not be occupied so that the door can open well. Thus, there seems to be some useful space, but at the same time it cannot be occupied. With a sliding door this problem disappears.

The absence of thresholds also speaks in favor of installing sliding doors. However, this paragraph applies only to those sliding doors that operate according to the “no threshold” system.

And another rather tempting advantage of doors of this type is their ease of use for people who are in wheelchairs. It is enough to move the door to the side, and not pull it towards you or push it forward, and then do the opposite to close it. Undoubtedly, sliding doors offer some convenience even if you have small children and it is still difficult for them to open doors with locking handles, or they simply cannot reach them yet. The sliding door can be opened without a handle. It is enough just to rest your hand on the door and push it to the side.

Along with obvious advantages, sliding doors also have undeniable disadvantages. These include, first of all, insufficient insulation of the room space. Swing doors fit tightly to the door frame, and sliding ones have a gap between the door leaves. However, this only applies to doors that consist of two or three leaves. Doors with one leaf, which are designed to fit into a special groove, create quite good soundproofing of the room. Lack of sound insulation relates to living rooms and work areas. If sliding doors are installed, for example, on the partition from the bedroom to the dressing room or from the kitchen to the pantry, then this point is inappropriate here, since you do not live in the utility rooms, but only store some things.

There is a “but” regarding saving space near sliding doors. Since the doors will move along the wall, it is impossible to place any large furniture, for example, a closet, next to the door. It can be moved some distance so that you can move the doors, but this will still take away useful space from you.

If you nevertheless decide to install sliding doors in your house, and even do it yourself, then we will dwell in more detail on the process of installing them. Let’s say right away that there is nothing wrong with this and coping with this task does not present any special problems. The main thing you should pay attention to is the accuracy of all calculations and, of course, the accuracy of the work performed. Sliding doors come in several types. We will focus on installing each of them.

Sliding doors with lower guide roller

To work with this type of door you will need following materials. First of all, this is the door leaf. Note that when choosing a door leaf, you should remember that it should be 5-7 cm wider than the existing doorway and the same height.

Next, you will need a set of fittings designed specifically for sliding doors. The set consists of a metal guide bar, rollers and fasteners. All these devices can be purchased at hardware stores.

In addition, you should purchase a wooden block measuring 5x5 cm and long. Which should be twice the width of the door leaf. Platbands for door frames. You need two of them - one will be attached to the side, the second will be located on top of the door frame. Box rack. It is necessary so that the door can be adjacent to it when it is in the closed position. You will also need two extras.

You choose door handles in the department furniture fittings. You also purchase anchors (they will be used to attach the timber to the wall), self-tapping screws and finishing nails for the platbands.

Installation of sliding doors with a threshold

1. Using self-tapping screws, attach the guide bar to the beam. To do this, you must first make holes for self-tapping screws in the metal strip with a drill. They should be at a distance of 20 cm from each other. The block and the guide bar must be secured very precisely, along a strictly horizontal line. If you make even a small error, the door will then close or open on its own.
2. Select a groove at the bottom of the door panel along which the guide roller will move. This groove is designed to ensure that the lower part of the door does not deviate when moving. If you don't have a router bit, you can replace it with a wood cutter.
3. After this, carefully clean out the excess from each hole using a chisel.
4. Install rollers into the guide bar. We fix the lower guide roller to the floor. Here you need to be very careful and install the lower roller strictly under the upper bar. Again, if you make a mistake, the door will simply not be vertical and will be at an angle.
5. After this, we first hang the door leaf on the lower guide roller. We give the canvas a vertical position and then fix it on the rollers that are located at the top.
6. Install limiters. They are necessary to ensure that the door leaf does not go beyond the boundaries of the guide strip.
7. On the side of the door frame we install a box-shaped stand in a vertical position. We attach it to the wall using special metal corners, which we then cover with additional panels.
8. Using finishing nails, we nail the trim on top and to the side of the doorway.
9. The final stage of the whole process will be attaching the door handles. Do not screw them immediately to the door leaf, even before starting all the work, in order to avoid possible miscalculations and reworking of the work.

For a tighter fit of the sliding door, it is recommended to glue anthers to them, or they are also called dust brushes. You can see the same ones on the edges of door leaves in wardrobes.

Sliding doors with a “no threshold” system

The advantage of this type of sliding door is that, unlike doors with a lower guide roller, in this case there are no rails or grooves under the door. Sliding doors “without a threshold” are fixed only at the top and that’s it. With this choice, you will not have to change, disturb or otherwise modify the floor covering.

To install sliding doors “without threshold” you will need:

- door leaf for a future sliding door in required quantity(one or more). Do not forget that the canvas should be larger in width and height than the size of the doorway.
- a metal strip with a length more than twice the width of the doorway;
- anchors (needed to secure the plank to the wall);
- two bearings;
- four metal strips and bolts for hanging on the metal strip of the door leaf. If you find it on sale, you can use two U-shaped metal strips to attach the bearings to the door.
- door handles.

Installation of sliding doors “without threshold”

1. We fix the bearings for the future sliding door. To do this, we attach metal strips to the door at an angle of strictly 90 degrees.
2. We put on the bearing using a bolt and four nuts.
3. We try on the doors to the doorway. This is necessary in order to measure the required height for the holes for the anchors.
4. Remove the doors and drill holes with a hammer drill.
5. Now you need to attach the sliding door to the metal strip. We fix the door leaf at the required height from the floor. In order not to constantly hold the doors suspended with your hands, you can use thin planks or bars of the same thickness and place them under the doors.
6. We insert the anchors and attach a metal strip to one of them. We thread the bearings that are already attached to the door leaf into the strip.
7. We lift the door and screw the second anchor to the metal strip.
8. If there is a need for door handles, then we screw them on at the final stage of work.

In order to reduce noise when opening and closing doors, a rubber strip can be glued to the top of the metal strip. You can also use a car camera for this purpose.

Now you can boast of a sliding door that you installed yourself.