When paying by credit card, no interest is charged.
Submersible well pump Unipump ECO-5
Cable: 1m,
Connection: 1 1/2",
Diameter x Length of the pump: 96mm x 1480mm,
Electrical power: 550W,
Max. head (Nmax) -121m,
Maximum productivity (Qmax) - 120 l/min
Submersible well pumps ECO series— intended for domestic use and used to supply clean water from wells with a diameter of at least 110 mm, deep wells and open reservoirs. They can also be used to create automatic water supply systems for private houses, cottages, etc.
ECO series pumps have no analogues. The pump body is made of stainless steel. The electric motor is single-phase. The flow part is centrifugal type, the impellers are “floating”, made of high-strength, wear-resistant polycarbonate. “Floating” impellers ensure a long service life of the pump part and reduce the likelihood of jamming when pumping water with mechanical impurities. The pump is equipped with a two-wire electrical cable. The starting capacitor and thermal relay are built into the pump housing (for models ECO-0, ECO-1, ECO-2, ECO-3), which greatly simplifies the installation and operation of the pump.
The pumped liquid must not contain long-fiber inclusions.
Technical information
| Parameters/model | ECO-0 | ECO-1 | ECO-2 | ECO-3 | ECO-4 | ECO-5 | ECO-6 | ECO-7 | ECO-8 |
|---|---|---|---|---|---|---|---|---|---|
| Power, W | 370 | 550 | 750 | 1100 | 1100 | 2200 | 1500 | 2200 | 2200 |
| Current consumption, A | 3,4 | 4,2 | 5,5 | 6,0 | 7,0 | 17,0 | 11,0 | 17,0 | 17,0 |
| Capacitor capacity, µF | 16 | 20 | 30 | 35 | 35 | 55 | 45 | 55 | 55 |
| Rated current of thermal relay, A | 5 | 6 | 8 | 10 | 17 | 25 | 20 | 25 | 25 |
| Outlet diameter | 1¼" | 1¼" | 1¼" | 1¼" | 1¼" | 1½" | 1¼" | 1¼" | 1¼" |
| Electric cable length, m | 10 | 20 | 30 | 40 | 50 | 1 | 1 | 1 | 1 |
| Overall dimensions, mm | Ø96 x 695 | Ø96 x 775 | Ø96 x 865 | Ø96 x 955 | Ø96 x 1060 | Ø96 x 1480 | Ø96 x 1290 | Ø96 x 1430 | Ø96 x 1650 |
- Electrical parameters - ~ 220 ± 10%, 50Hz
- Operating water temperature range - + 1... +35°С
- Maximum immersion depth from the water surface, m - 20
- The total amount of mechanical impurities in suspension is no more than 100 g/m³
Pressure and flow characteristics
| Model | R, (kW) |
Performance | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Q, m 3 /hour | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3.0 | 3.6 | 4.2 | 4.8 | 5.4 | 6.0 | 7.0 | ||
| Q, l/min | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 117 | ||
| ECO 0 | 0.37 | Pressure, N (m) |
35 | 32 | 30 | 27 | 24 | 19 | 15 | 11 | 5 | 3 | - | - |
| ECO 1 | 0.55 | 52 | 49 | 46 | 44 | 36 | 29 | 23 | 17 | 10 | 4 | - | - | |
| ECO 2 | 0.75 | 60 | 55 | 50 | 47 | 40 | 33 | 30 | 23 | 14 | 10 | - | - | |
| ECO 3 | 1.1 | 85 | 82 | 76 | 71 | 62 | 54 | 42 | 31 | 16 | 12 | - | - | |
| ECO 4 | 1.1 | 100 | 98 | 94 | 90 | 85 | 79 | 65 | 58 | 40 | 34 | - | - | |
| ECO 5 | 2.2 | 121 | 118 | 117 | 112 | 108 | 105 | 103 | 99 | 90 | 80 | 70 | 48 | |
| ECO 6 | 1.5 | 148 | 146 | 141 | 136 | 130 | 120 | 110 | 83 | 47 | 30 | - | - | |
| ECO 7 | 2.2 | 149 | 143 | 140 | 138 | 134 | 127 | 120 | 115 | 110 | 92 | 62 | - | |
| ECO 8 | 2.2 | 200 | 195 | 190 | 185 | 170 | 150 | 117 | 113 | 80 | 65 | - | - | |
* - the given data on maximum pressure and productivity are valid at zero suction depth and an electrical network voltage of 220V±10%.
Contents of delivery:
- Submersible pump with electric cable - 1 pc.
- Starting device (only for models ECO-5, ECO-6, ECO-7, ECO-8) - 1 pc.
- Operation manual - 1 pc.
- Packaging - 1 pc.
Brand: UNIPUMP
Equipment manufacturer: SABLINE SERVICE LLC (Russia)
Warranty: 24 months. (2 years)
Delivery up to 50 kg
Delivery terms.
Delivery within the city for orders over 6,000 rubles. carried out to the apartment for free. The cost of delivery of goods worth less than 6,000 rubles. within the city is 150 rubles. and is carried out to the entrance.
The cost of delivery to remote areas is agreed with the operator. Delivery time is determined by agreement with the buyer.
Receipt and payment of goods.
If you have any complaints about the appearance and completeness of the goods, you can refuse the goods. Acceptance of goods in appearance, completeness and absence of mechanical damage at the time of delivery is mandatory. When receiving the goods, if possible, have money ready without change. Receive the ordered goods and documents (sales receipts, cash receipts or invoices) from the delivery service courier. Check the availability and completeness of the product, the integrity of the original packaging and the availability of warranty cards (if they are provided for this product).
Description of payment methods
Submersible well pump ECO-5 (2.2kW,1 m),+ REMOTE, Subline
Submersible well pumps of the ECO series are intended for domestic use and are used to supply clean water from wells with a diameter of at least 110 mm, deep wells and open reservoirs. They can also be used to create automatic water supply systems for private houses, cottages, etc.
UNIPUMP ECO - borehole pump video watch
ECO series pumps have no analogues. The pump body is made of stainless steel. The electric motor is single-phase. The flow part is centrifugal type, the impellers are “floating”, made of high-strength, wear-resistant polycarbonate. “Floating” impellers ensure a long service life of the pump part and reduce the likelihood of jamming when pumping water with mechanical impurities. The pump is equipped with a two-wire electrical cable. The starting capacitor and thermal relay are built into the pump housing (for models ECO 0, ECO 1, ECO 2, ECO 3, ECO 6), which greatly simplifies the installation and operation of the pump.
The pumped liquid must not contain long-fiber inclusions.
Technical information
| Parameters/model | ECO 0 | ECO 1 | ECO 2 | ECO 3 | ECO 4 | ECO 5 | ECO 6 | ECO 7 | ECO 8 |
|---|---|---|---|---|---|---|---|---|---|
| Power, W | 370 | 550 | 750 | 1100 | 1100 | 2200 | 1500 | 2200 | 2200 |
| Current consumption, A | 3,4 | 4,2 | 5,5 | 6,0 | 7,0 | 17,0 | 11,0 | 17,0 | 17,0 |
| Capacitor capacity, µF | 16 | 20 | 30 | 35 | 35 | 55 | 45 | 55 | 55 |
| Rated current of thermal relay, A | 5 | 6 | 8 | 10 | 17 | 25 | 20 | 25 | 25 |
| Outlet diameter | 1¼" | 1¼" | 1¼" | 1¼" | 1¼" | 1½" | 1¼" | 1¼" | 1¼" |
| Electric cable length, m | 10 | 20 | 30 | 40 | 50 | 1 | 1 | 1 | 1 |
| Overall dimensions, mm | Ø96 x 695 | Ø96 x 775 | Ø96 x 865 | Ø96 x 955 | Ø96 x 1060 | Ø96 x 1480 | Ø96 x 1290 | Ø96 x 1430 | Ø96 x 1650 |
- Electrical parameters - ~ 220 ± 10%, 50Hz
- Operating water temperature range - + 1... +35°С
- Maximum immersion depth from the water surface, m - 20 (for models ECO-0, ECO-1, ECO-2, ECO-3, ECO-4)
- Maximum immersion depth from the water surface, m - 80 (for models ECO-5, ECO-6, ECO-7, ECO-8)
- The total amount of mechanical impurities in suspension is no more than 100 g/m³
Pressure and flow characteristics
| Model | R, (kW) | Performance | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Q, m 3 /hour | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3.0 | 3.6 | 4.2 | 4.8 | 5.4 | 6.0 | 7.0 | ||
| Q, l/min | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 117 | ||
| ECO 0 | 0.37 | Pressure, N (m) |
35 | 32 | 30 | 27 | 24 | 19 | 15 | 11 | 5 | 3 | - | - |
| ECO 1 | 0.55 | 52 | 49 | 46 | 44 | 36 | 29 | 23 | 17 | 10 | 4 | - | - | |
| ECO 2 | 0.75 | 60 | 55 | 50 | 47 | 40 | 33 | 30 | 23 | 14 | 10 | - | - | |
| ECO 3 | 1.1 | 85 | 82 | 76 | 71 | 62 | 54 | 42 | 31 | 16 | 12 | - | - | |
| ECO 4 | 1.1 | 100 | 98 | 94 | 90 | 85 | 79 | 65 | 58 | 40 | 34 | - | - | |
| ECO 5 | 2.2 | 121 | 118 | 117 | 112 | 108 | 105 | 103 | 99 | 90 | 80 | 70 | 48 | |
| ECO 6 | 1.5 | 148 | 146 | 141 | 136 | 130 | 120 | 110 | 83 | 47 | 30 | - | - | |
| ECO 7 | 2.2 | 149 | 143 | 140 | 138 | 134 | 127 | 120 | 115 | 110 | 92 | 62 | - | |
| ECO 8 | 2.2 | 200 | 195 | 190 | 185 | 170 | 150 | 117 | 113 | 80 | 65 | - | - | |
* - the given data on maximum pressure and productivity are valid at zero suction depth and an electrical network voltage of 220V±10%.
The submersible centrifugal pump for a well UNIPUMP ECO-5 (manufacturer - UNIPUMP) is designed to lift water from a well with a diameter of 110 mm or more. Due to its design features and the quality of the materials used, it is used for both technical and drinking water supply. As a rule, this is the provision of water to private houses, dachas, watering of personal plots, greenhouses. It is successfully used in small businesses to provide water to farms, small industries, etc.
Its differences from other pumps
- the pump body is made of high-quality stainless steel, impellers made of high-strength, wear-resistant polycarbonate
- the presence of “floating” impellers allows you to pump water with a small amount of solid inclusions (clay, sand) without the risk of pump jamming.
- the source of water can be not only wells, but also wells, as well as any other natural sources or artificial reservoirs.
Specifications
Maximum flow rate, l/min - 120
Maximum head, m - 121
Power consumption, W -2200
Current consumption, A - 7
Voltage, V/Hz - 220/50
Cable length, m - 1
Maximum immersion depth, m - 20
Diameter of the connection connector, inch - 1 1/4"
Dimensions - Ø 96mm x 1480mm
Range of operating water temperatures, C. - from +1 to +35
Max. possible sand content, g/m3 - 100
Pressure and performance characteristics of ECO pumps
| Model | Performance | ||||||||||||
| m³/hour | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.2 | 4.8 | 5.4 | 6 | 7 | |
| l/min | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 117 | |
| ECO-0 | Head, m | 35 | 32 | 30 | 27 | 24 | 19 | 15 | 11 | 5 | 3 | ||
| ESO-1 | 52 | 49 | 46 | 44 | 36 | 29 | 23 | 17 | 10 | 4 | |||
| ESO-2 | 60 | 55 | 50 | 47 | 40 | 33 | 30 | 23 | 14 | 10 | |||
| ESO-3 | 85 | 82 | 76 | 71 | 62 | 54 | 42 | 31 | 16 | 5 | |||
| ESO-4 | 102 | 98 | 94 | 90 | 85 | 79 | 65 | 58 | 40 | 34 | |||
| ECO-5 | 120 | 118 | 117 | 112 | 108 | 105 | 103 | 99 | 90 | 80 | 70 | 48 | |
| ESO-6 | 148 | 146 | 141 | 136 | 130 | 120 | 110 | 83 | 47 | ||||
| ESO-7 | 149 | 143 | 140 | 138 | 134 | 127 | 120 | 115 | 110 | 92 | 62 | ||
| ESO-8 | 200 | 195 | 190 | 185 | 170 | 150 | 117 | 113 | 80 | 65 | |||
The package includes
Pump, pcs - 1
Starting device with thermal protection, pcs - 1
Operating manual, pcs. -1
Packaging container, pcs - 1
Design and operational features
During operation, the pump does not require special maintenance; there is no need to disassemble it.
- the unique design of floating impellers allows for uninterrupted operation of the pump even in conditions of silted wells and the presence of solid impurities in the water - sand and clay, but their content should not exceed more than 100 g/m3. A higher level of their content leads to rapid wear of the pump and possible emergency situations.
- has an external trigger (capacitor box).
- the composition of the floating impellers is high-strength, wear-resistant polycarbonate.
- high-quality oil seals reliably protect the electric motor from water ingress.
- the body is made of stainless steel, which increases its service life.
- the presence of thermal protection that turns off the pump when overheated.
- equipped with a high-quality oil-filled electric motor.
- the presence of a filter grid that prevents large impurities from entering the pump part
This centrifugal pump is a truly innovative design and has excellent performance characteristics. Has excellent consumer reviews. We recommend it not only as an excellent well pump, but also as a well pump.
It is worth noting that on the basis of this pump you can build an automatic water supply system for any facility or private household.
For successful operation you should know the following:
- before installing the pump in the well, you must make sure that the casing pipe is not broken, not bent and its diameter allows the pump to be lowered
- a check valve should be installed in front of the pump outlet - if this unit operates as part of a single water supply system.
- the maximum possible immersion depth is 20 m, the distance from the intake hole to the dynamic water level should not be less than 3 m, the distance to the bottom of the well or well should not be less than 1.5 m.
Important!
- it is prohibited to hang the pump by the electrical cable; for this you must use a steel or nylon cord.
- the pump should not be allowed to turn on more than 20 times per hour
For more information on using this equipment, see the operating instructions.
How to buy a pump
You can buy the UNIPUMP ECO-5 pump by placing an order directly on the online store website, or by calling the phone in the Contacts section. Our manager will contact you and arrange delivery or reserve the goods for pickup.
If you need a UNIPUMP ECO-5 pump in Moscow, we offer delivery throughout the city and the nearest Moscow region. For buyers from other regions of Russia - delivery by any transport company or postal service as agreed.
You can pick up the purchased product yourself or use the delivery service in Moscow and the Moscow region. By placing an order today, you will receive it at your disposal tomorrow. If necessary, you can use the prompt delivery service and receive your products today.
Delivery to the entrance (check with the manager about the possibility of lifting to the floor)
Delivery is made daily from 9 to 21 o'clock , including weekends and holidays.
Goods worth up to 6,000 rubles can be picked up by self-pickup.
Pickup points
For orders worth more than 6,000 rubles:
- Within the Moscow Ring Road - from 0 to 500 rubles, (individual delivery cost is indicated in the product card)
- Outside the Moscow Ring Road up to 10 km - 700 rubles,
- Beyond the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
- To the regions, delivery by a transport company (calculated individually).
Delivery cost for
km from MKAD
700 rub.
Unloading of large-sized goods is carried out by the efforts and means of the customer.
The money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and convenience of calculation.
Payment by bank card to the courier upon receipt
Couriers have a portable banking terminal, which allows clients of the Teplovod-Service company to pay for goods with bank plastic cards (check with the manager about the possibility of paying by bank card).
Payment by credit card on the website
To select payment using a bank card, on the “Cart” page, you must select the “Payment by bank card on the site” item.
Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:
After clicking on the “ONLINE PAYMENT” button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.
Please prepare your plastic card in advance. Additionally, you need to enter your full name, email, contact phone number, and reservation number to identify the payer. The connection to the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.
If your bank supports the Verified By Visa or MasterCard Secure Code technology for secure online payments, you may also need to enter a special password to make a payment. You can check the methods and possibility of obtaining passwords for making online payments with the bank that issued the card.
This site supports 256-bit encryption. The confidentiality of the reported personal information is ensured by Sberbank of Russia OJSC. The entered information will not be provided to third parties except in cases provided for by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.
When paying by credit card, no interest is charged.
Payment is a transfer of funds from the buyer's current account to the seller's account; we work on a common taxation system including VAT. Delivery of goods is carried out after receipt of funds to the account of the company Teplovod-Service LLC. This method is used for calculations by legal entities.
Our details
Limited Liability Company "Teplovod-Service"
OGRN: 1105003006162
Taxpayer Identification Number: 5003088884
Checkpoint: 500301001
BIC: 044525225
Bank: PJSC “Sberbank of Russia”
R/s: 40702810838060011732
S/s: 30101810400000000225
Legal address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoe highway, 21 km., office B-6
Special conditions
- For any product sent by a transport company, 100% payment is required.
For goods with the status "To order" worth up to RUB 100,000. no prepayment required.
For goods with the status "To order" over 100,000 rubles. An advance payment of 30% is required.