Removing a Windows 10 account. Removing a Microsoft account from a computer: how and why to do it

This question is asked by users, most likely because they constantly enter a password when turning on or resuming their computer from sleep mode in Windows version ten. However, there may be other reasons for deleting a Microsoft account. Well, if you want to do this, then you know exactly why.

If you are worried about constantly entering a password and it is for this reason that you want to delete your Microsoft account, then from the beginning I advise you to read the article How to remove the password when logging into Windows 10. I also want to note that when using a local account, some functions in Windows 10 may not be available, for example, you will not be able to use a graphic password or PIN code to log into the system. Well, if you have finally decided to do this, then read the article further.

In fact, using this method to delete your Microsoft account will not lead to its complete destruction. This method will show you how to switch to a local account, while your Microsoft account will not bother you. But then if you want to switch back, you can do it without any problems. In any case, at the end of the article, a method for completely deleting a Microsoft account will be shown.

In the Windows settings window that opens, you guessed it, we are interested in the accounts tab.

In the "tab" your parameters", click on the item " login with a local account instead".

In the window that opens, enter your current Microsoft account password.

Next we enter Username for local account. You can also enter a password for it, but if you switched to this account precisely because you entered a password, then of course you skip this point.

Click on the button .

Now the system boots with a local account and everyone is happy.

To completely delete an account, go to the account settings and select the " tab E-mail address; application accounts". Find your Microsoft account, click on it and click delete.

Confirm deletion by clicking YES.

ABOUTGive your opinion about this article, and of course, ask your questions if something suddenly goes wrong for you.

Thank you for your attention!

Windows 10, like earlier versions of Windows, supports the creation of multiple user accounts. You can create local user accounts as well as Microsoft accounts to sign in to Windows 10. Many people have created multiple profiles so others can use their computer. You may have created a different profile for your family to use your computer. If you have multiple user accounts on your computer, sometimes you may need to disable or lock the user account on your computer or laptop to restrict the user's access to their account or prevent the user from using the computer, laptop.

You can always delete a user account, block it, enable it or disable it for a short period. For example, you can block or disable your child's account during exams to prevent them from playing games on the PC. When a user tries to log into a locked local account, they will receive the message "Your account has been disabled. Contact your system administrator." If it is a Microsoft account, the user will receive an incorrect password error even if they enter the correct password. Let's look at the guide below on how to disable, enable and lock a user account in Windows 10.

Enable or disable a user account in Windows 10 Pro

Note: This method only applies to versions of Windows 10 Pro and above. If you are in the Home edition, then follow the method below.

Click Win+R and enter compmgmt.msc to enter computer management.

In the Computer Management window, go to " Local users and groups" > "Users".
On the right, select the user account you want to disable.
Click on it twice and in the window that opens, in the "general" tab, check the " Disable account".

Enable or disable a user account in Windows 10 Home

Windows 10 Home users can use the Command Prompt to enable or disable a user account.

Click "search" next to the start button and type cmd or command line, right-click and run as administrator.

To disable an account, enter the command at the command prompt net user name /active:no, where name is the actual account name.

Owners of a new operating system often wonder how to delete a user in Windows 10 if the account is redundant or defective? The answer to this question lies in the specifics of working with user accounts. Microsoft developers have added a new design of system settings to the OS. Now, using a special section of Settings, you can delete a user in Windows 10 or temporarily disable a second account. This is a useful innovation, since the computer administrator may not delete the profile, but temporarily prohibit it from logging into the system. However, if disabling your profile on your computer is not an option for you, you can delete your user account in Windows 10.

How to delete a user account in Windows 10 through Settings?

To delete a Windows 10 user through Settings, you should follow a few simple steps:

Click “Start”, “Settings” and select “Accounts”.

A new window will open. In the left menu, select “Family and other users”. In the main window, select the account. The owner can be an administrator. In this case, a password may be required. Click “Delete”.

A window will appear warning you about deleting a Windows user. Confirm the operation.

IMPORTANT! Along with the account, all desktop objects, “Documents”, “Video”, “Records”, “General” folders will be deleted. Therefore, if this data is valuable, it is worth copying it in advance.

How to delete a profile in Windows 10 via the command line?

To delete a user profile in the Windows 10 operating system, you should follow these steps:

Right-click on the “Start” icon and select “Command Prompt (Admin).”

The console will open. Enter the first command: net users.

Next, the command to delete a profile will be as follows: net user Username /delete, where “Username” is the name of the account that needs to be deleted.

We are waiting for the profile to be deleted.

Removing an account in Windows 10 through the Control Panel

If you need to delete a profile on Windows 10, we recommend using the Control Panel. To do this, perform the following steps:

Click “Start” and select “Control Panel”. Then in the new window select “User Accounts”.

If you have several accounts, then you should choose the one you want to delete. We carefully look at the username in Windows 10. Click “Delete account.”

A window will appear asking you to save your profile data. We save at our discretion. Then click “Delete profile”.

Profile has been deleted.

It is important to note that when deleting a profile through the Control Panel, you may be faced with the need to enter a password. If you don't know your password, you should use the following recommendations.

Deleting an account via the Run line

You can delete a profile on Windows 10 in just a few clicks via the Run line. To do this we do the following:

Press “Win+R” and enter “netplwiz”.

A new window will open. Select entry 2 and click “Delete”.

After confirming the selected action, the other user will be deleted.

How to block one of the accounts on Windows 10?

If account 2 is rarely used, but you do not intend to delete it, you can simply block it. To do this, follow the instructions:

Click “Start”, “Settings”, “Accounts” and select “Family and other users” in the left menu.

Pull the slider down. Select the account that needs to be blocked and click “Block”.

Then we confirm the selected action and click “Deny”.

Today we will tell our readers how to delete an account on Windows 10. And we will do this based on a variety of situations: when there is only one entry, and you want to unlink it from the Microsoft website and make it local, or when the account is not needed at all. The second method can delete any additional account, naturally, except for the administrator, both local and network-bound. At the end of the article, for your convenience, there is a video instruction. The desire to delete your Windows account may arise, for example, when you are unable to change your email on the Microsoft website.

Let's get started. Each of the methods will be considered in as much detail as possible and, following our recommendations, you will certainly achieve the desired result.

Progress does not stand still, operating systems are becoming more convenient and functional. The leader in this field is not far behind - Windows, or rather its latest tenth version. Microsoft links users' accounts to their accounts so that data is stored in the cloud at all times and cannot be lost, which often happens when using a standard hard drive or even an SSD drive. By storing your files, passwords, and settings on OneDrive (Microsoft's cloud storage service that's free to every Windows user), you can be sure they'll never get lost.

There is one more point that speaks in favor of an Internet account. This is a banal reinstallation of Windows. This operating system is built differently than others. The registry is used here and this is an outright disadvantage of both “Ten” and other versions of the Microsoft OS. The fact is that over time this registry becomes cluttered and the average user has no choice but to reinstall the operating system. And here the most interesting thing awaits you - installing Windows itself is not difficult and does not take long, but installing and configuring the software takes a lot of time. For example, the application we use, Key Collector, requires re-configuration, which takes more than half an hour. If you install it on the cloud, you will not need to configure the configuration and the program will be ready in 2 minutes. Draw conclusions.

How to delete a user in Windows 10 and make the account local

This is the easiest way to make your account local. We will use the system tools and no user settings will be affected. Software or personalization will remain the same. Let's start solving the problem:

In order to open the settings we need, we can use the combination
on keyboard. In the window that opens, click on the “Accounts” tile.

Attention! Before we continue with the process, please save all your data and exit your programs. The connection to your Microsoft account will be lost and the files will become inaccessible .

Click on the inscription highlighted in the screenshot with a red frame.

Another window will open in which we will need to enter the current password. We do this and click “Next”.

At the next stage, enter the data for the new account. This is the password, its confirmation and a recovery hint.

Almost done. All we have to do is click on the button indicated in the screenshot and switch to a new account. Let us remind you once again that you need to save all data and close programs.

After pressing the key, the current session will be ended.

All we have to do is enter this password.

How to delete an account if there are several of them on the system

There are situations when there are 2 or more accounts in the Windows operating system, but only one is needed. Accordingly, the excess ones need to be erased. Let's figure out how to do this. First you need to log in as an administrator. Naturally, not the one we will liquidate. You will not be able to make any changes to the system from a guest account.

We need to open system settings. To do this, we use a slightly different option than the one that was used last time. We will launch the settings through the notification panel. To do this, open the panel itself and click on the button indicated in the screenshot.

Go ahead. Click on the Accounts tile.

Now click on the left side of the window that opens on the words “Family and other people”, and on the right side select the user whose account you want to delete.

When we click on the selected account, two buttons will open. Click “Delete”.

A warning will appear that all data for this user will be irretrievably erased along with the account: documents, downloads, objects on the desktop, application settings, photos, music, etc. If we agree, then click the button marked in the screenshot.

After a few seconds, depending on the amount of account data, it will be completely deleted. Your files will not be affected. Below we will provide a method that will allow you to erase any account without affecting its data.

How to delete an account through the control panel

There is another option for deleting an account using the control panel. The method also does not require any special effort and, following our recommendations, you can easily cope with the task. Let's get started.

Let's go to the control panel. Let us remind you that in order for everything to work, you need to work from an account with superuser (administrator) privileges. Open the Tens search tool (the magnifying glass icon located on the left side of the taskbar) and search for “control panel.” Next, you need to click on the result that appears.

Let's go to the section highlighted in the figure.

Next, click on the line “Delete user accounts”.

Now we select the account that we will delete (you can remove both a local one and an account associated with Microsoft).

In the next window, simply click “Delete account”.

This is the point we were talking about. We can delete an account but leave the files associated with it. You can also erase everything. In our case, the data must be saved, so click on “Save files”.

Windows will ask us one last time if we really want to erase the account and notify us that the user will no longer be able to log in, but all his files will be saved on our desktop in a folder with his name. We agree and click “Delete account”.

After this, the account will be deleted. If any files were associated with it, they will be saved and placed in a folder on your desktop.

There is another way to delete an account in Windows 10. In order to use it, you must, as before, have administrator rights. We do the following:

We need the “Run” tool - press Win + R and launch it. In the window that opens, enter the command “netplwiz” without quotes and click “OK”.

A new window will appear. Remove the switch next to “Require username and password” and select the required account a little lower. Next, click the button labeled “Delete.”

The system will ask us again if we are confident in our actions, but we confirm them by pressing the “Yes” button.

Ready. The user account has been completely erased from your computer.

Via command line

You can achieve the same results through the command line. Use this method if none of the above worked. Moreover, this method is faster.

Attention! Beginner users should not use account deletion via the command line. The system will not ask you again about your intentions and will delete all data, including your account, immediately and irrevocably. Keep this in mind before you begin.

Let's move on to working with the command line:

We will launch the command line through the Windows search menu. This will allow you to work with administrator rights. Click on the magnifying glass icon and enter the words “cmd” into the search bar. We look for the result we need in the results and right-click on it. We need the "Run as administrator" option.

Let's ask Windows for a list of users and figure out who we're going to delete. To do this, enter “net user” into the command line without quotes and press Enter.

The system will display the result: in our case, these are only two users. We remember the name of the account that we will delete, and enter the following command: “net user “username” /delete” (without quotes).

Windows accepted the command and responded that it was executed correctly. Let's check if the user has left. Enter “net user” again.

As you can see, the account with the name “Seryozha” is no longer there. Everything works perfectly.

How to disable User Account Control

User Account Control or, as it is also called, UAC in the “Ten” exists to notify us about the activity of applications that require access to change system files. In other words, those programs that run with administrator rights. This is how Windows 10 takes care of your security. Out of the box, UAC alerts you to any activity by applications that try to gain access to administrative rights, but you can configure this mode however you like.

Using the Control Panel to disable Windows Account Control

The first method is simpler than working with the registry editor, so it is recommended for use by beginners. Begin.

Open the control panel. Enter its name in the Windows search bar, which can be launched through the icon on the left side of the taskbar.

In the window that opens, find the section indicated in the screenshot and go to it.

Click on a similar entry in the next window.

Next, click on the inscription circled in red.

A new window has opened. There is a slider here that is responsible for controlling our account; the higher you raise it, the tighter this control will be.

Note: you can get to the window with the account settings slider in “Ten” using the “Run” utility. Enter the command “UserAccountControlSettings” without quotes in its field and click “OK”.

Explanation of the four positions in which you can set the User Account Control switch:

always notify about the following cases: when programs try to install or edit PC settings and when the user changes computer settings (this profile is recommended for multiple installations of different software or active work on the network);
notifications about changes in PC settings by users are disabled (recommended for use by those users who work with proven software and websites);
there are no notifications about editing computer settings by the administrator (this algorithm should be used only when darkening the desktop takes a lot of time);
Even if applications try to install software, no notifications are received (using such a profile is strongly discouraged).

If you do decide to disable UAC, remember: now any software will be able to automatically install software, and you won’t even know about it. If you want to deactivate User Account Control just because of the pop-up, we strongly advise you not to do so!

Setting up UAC in Registry Editor

You can completely disable User Account Control or select each of the four operating scenarios in the Registry Editor. We will describe how this is done.

Launch the Registry Editor using the “Run” utility, which can be called with the Win+R hotkey combination.

Go to the path indicated in the screenshot and change the values of the parameters on it (you can change the value of a registry key by double-clicking on it with the left mouse button).

Deciphering the values of system registry keys responsible for controlling permissions in the Windows system:

notifications always arrive: 1, 1, 2;
notifications arrive when any program tries to change settings: 1, 1, 5;
Screen dimming is disabled, notifications are received: 0, 1, 5;
completely disable account tracking: 0, 1, 0.

Attention! We warn you once again - by disabling UAC, you are putting the security of your PC at risk.

Let's sum it up

Above we described how to disable a Windows 10 account, both local and linked to a Microsoft account. All methods work perfectly on any of the Tens editions. Each user has the right to choose the most convenient option for himself and use it. If you have any problems, write in the comments, we will definitely help you.

Video on how to delete a Microsoft account in Windows 10

Windows 10 provides the ability to disable any user account. This feature may be useful, for example, when you give a computer for temporary use to another person and do not want him to get into your profile and manage it there. You simply disable it and provide the new user with a new one. Of course, in this case, you can simply set a password, but disabling the profile will be a more secure method. Especially when the computer is provided for a fairly long period of use. If you are interested in how to disable a user account in Windows 10 on a computer, laptop, tablet, then we suggest you read this guide.

Before you disable your profile, you need to create a new one and give it administrator rights. If you do not do this, then in the future you will not be able to get into the system.

Disabling a Windows 10 user account through Computer Management

This method involves working with the section Local users and groups in a snap Computer management. If you have Windows 10 Home (Core), this option will not work for you. There is no such section in it.

Disabling a Windows 10 user account using the command line

This method is suitable for all editions of the desktop "ten", since almost all actions are performed using.

Enabling the Windows 10 user account

In order to activate disabled recording on a computer that has returned to the family, do the following:

To enable a Windows 10 user account using the Command Prompt, open Command line with administrator rights and enter the command net user username /active:yes, where username is the name of the disabled user profile.

All. You have restored access to your account and can now work in it.