Rollers for decorative painting of fur coat walls. Rollers for decorative plaster and creating a relief surface

Use decorative plaster, as a finishing material, has not surprised anyone for a long time. This normal look decor is used in decoration apartment rooms or offices, as well as the façade of houses or buildings. The result of the work is durability and strength. There are many dyes to suit every taste. Not only the master, but also you yourself can cope with paint.

TO good qualities We can also attribute the absence of seams on the walls, which makes the surface more refined. If we go deeper into the topic of decor, we can talk about it for a very long time. For anyone plastering work required special tool– roller for decorative plaster.

Multicolored smooth walls– it’s no longer attractive and has gone out of fashion. The interior does not look original. Can help - structural cushion for decorative plaster, depending on the type, it can make a variety of three-dimensional designs on the putty.

How to make a roller yourself

Textured rollers for decorative plaster look like a regular roller, only on the main part there is a special application that allows you to create a three-dimensional texture or relief. Before you choose a tool for painting, you need to decide which plaster should be applied with a roller, and not with brushes or spatulas. Firstly, these are structural acrylic materials for exterior and interior use.

For the premises you need to use Venetian or fine materials. To give the most beautiful effect, the granules must be small. Correctly applied relief will make the room cool and individual. It is acceptable to draw some elements of a pattern or picture. A different colors They'll just do their job. Rollers for decorative plaster are divided into two types:

depending on the type of material of the working surface of the tool;
depending on the pattern that is made on the wall.

How to make a roller with your own hands (video)

Types of rollers according to working surface material

The characteristics of each roller contain:

Description of the material from which the tool is made
The effect you should get
Properties of plaster material, recommendations for proper use

Here we will look at how to apply decorative plaster with a roller. You can often find removable rollers. They differ from each other in length and diameter. The soft surface (coat) of the tool takes on the plaster. Harder and more elastic - they leave a clear pattern. These include materials: wood, plastic, foam rubber, rubber. Fabric and leather - leave a fuzzy imprint on the wall or facade. Types of rollers for decorative plaster:

Roller material	general characteristics	Additional Information
Rubber	The price of this type is budget. They serve well and last a long time. A pattern is applied to a “fresh” plastered surface using a roller. Depending on the pressing force of the prints, the depth of the pattern will be determined.	For plaster with the addition of decorated particles, a roller with large porosity is ideal.
Wood	There are two options for constructing a cylinder: a cut out relief or glued convex elements.	For a good pattern, do not put too much pressure on the tool.
Plastic	The price is as good as rubber. There is a closed pattern on the roller. Suitable for creating a pattern for painting on wallpaper	The quality is not very good; over time, they form small cracks, which can damage the plastered surface.
Leather	Creates a marble effect. With their help you can create a Venetian style with your own hands.	It's better to buy real leather, it will last much longer.
Pile (fur)	There are artificial and natural piles of different lengths. The smaller the pile, the smoother the relief.	When buying a tool, you need to check the quality of the lint to see if it falls out. Otherwise, the fibers will be glued to the plaster.

Tip: when applying textured material, there is no need to put pressure on the tool. Movements during work should not be sudden.

Types of rollers according to the type of final pattern

In order to decide which roller to paint decorative plaster with, you need to consider it appearance, and not listen to the name. Structural. When used, the spongy texture creates porosity on the surface. Used for painting complex images and ornaments. Made from wood and rubber. Used for painting with a liquid solution already applied to putty. The texture of bark beetles is very popular.

Textured. Decorative plaster using such a roller creates a “fur coat” effect. If you paint with a roller with a loop pattern, you will get an imitation of stone. To create a marble pattern, use bamboo, nozzles or genuine leather. Decorative plaster is painted on the surface with a roller, and at the same time the texture is formed. In order for the drawing to turn out correctly, the applied layer of plaster must be thin.

Self-production of rollers with photos and videos

Ways to make a homemade paint roller:

Wind a stiff, wrinkled or twisted fabric onto a smooth roller (photo No. 1).
If the original instrument has a nap covering, you can wrap it with twine. This will give a rough effect. You can also cut out circles in the shape of polka dots, this will allow the surface to be more openwork.
You can stick shapes onto a smooth roller. You need to fix it with varnish (photo No. 2).

To make the drawing as high quality as possible, you need to round off all attached parts. This will allow all elements to be completely immersed in the plaster layer. How much will such a roller cost? The price of a ready-made purchased one will be 3 times more than a homemade one. Store bought 700 rubles, roller for decorative plaster with your own hands 150 rubles. To study the material, it is recommended to watch the video lesson:

Decorative plaster is a finishing material that is extremely attractive not only in terms of its technical characteristics.

This covering opened ample opportunities, both to designers and to ordinary people who want to give their home a stylish personality.

Using a roller, you can recreate many types of surfaces.

A textured roller will help to imitate wood, a slab of cut stone, fur, leather, and even animal paw prints if animal motifs can be traced in the interior. This seemingly simple video contains enormous design possibilities. All you need to do is select a roller with the desired texture and master the technique of use.

Rollers differ from other tools for adding texture to plaster primarily in their purpose. Applicators, stamps, sponges, decorative tampons are designed for spot work or decoration of small areas. Using a structural roller for decorative plaster, you can process large surfaces and increase productivity significantly.

All numerous types of rollers can be divided according to two criteria: the type of material from which the working surface is made, and the pattern that they leave on the plaster.

Types of rollers according to working surface material

Foam rubber

Foam rubber for such a roller should have deep pores of various diameters, which, depending on the size, will leave marks on the plaster in the form of burst bubbles or “moon craters.”

There is no need to press the roller with force, otherwise the plaster will lie in a regular, even layer, without any relief.

You should also pay attention to the following points:

Decorative plaster should be finely dispersed.

Embossed does not cope with the stretching of large particles, and the effect of the desired surface is blurred

You cannot work with plaster containing solvents.

These substances easily dissolve foam rubber, fragments remain on the surface, creating an unesthetic appearance.

Foam

More cheap analogue rubber roller. With its help you can also work with various types plaster and recreate many patterns, but such a roller will not last long.

Polystyrene foam is a fragile material that is prone to deformation, so such a roller will have to be changed more than once during the work.

Additionally, patterns on foam tend to flatten, creating a pattern that is not what you'd expect.

As an option, you can use a foam roller with a flat surface, but, unfortunately, it is not able to give the plaster an interesting texture.

Rubber

The most preferred tool option. On the flat surface of the roller there are protrusions or indentations that create a pattern.

Suitable for creating a clearly defined texture: brickwork, paintings, patterns of various types.

In some cases, the plaster may stick to the surface of the roller. To avoid this, it is recommended to wet the roller in soap solution, however, it is unknown how such manipulations will affect the appearance of the final coating.

Leather

A roller with a leather surface can create one of the most commonly used effects - a marble surface. Due to its elasticity, the skin creates beautiful marble “stains”.

Most often, this tool is used to work with Venetian plaster.

The choice of roller must be approached carefully: it is better to use natural leather.

Artificial material can only cause disappointment, since poor-quality leather best case scenario will glide over the plaster without leaving any marks, and in the worst case, it will dissolve and ruin expensive plaster.

Wooden

One of the simplest rollers, which has all the advantages of rubber. However, such a tool additionally guarantees the environmental friendliness of the coating, because the tree will not enter into spontaneous chemical reaction with ingredients in the plaster composition. Therefore, wooden rollers are often used to decorate walls in children's rooms.

However, over time, wood can absorb water from the plaster and swell. At the same time, the picture becomes less clear. The fix is simple: just dry the roller and it will be ready for further work.

Plastic

A plastic roller is positioned as a cheaper analogue of a rubber roller. Allows you to create a variety of textures and patterns. On sale you can find plastic rollers with holes and holes for creating bulges on the wall. This version of the surface is non-trivial.

To the disadvantages of this material It can be attributed to the fact that over time the plastic becomes deformed, becomes covered with cracks and chips, which does not in the best possible way is reflected in the final result.

fleecy

Creates the effect of a “fur” wall. The pile material differs in variety - from natural fur to polyamide threads. The length of the pile varies from 2 to 25 mm. The longer the pile, the more “shaggy” the wall will be.

When purchasing, you should be careful and check the quality of attachment of the pile to the moving cylinder.

A low-quality roller will ruin the surface, littering it with loose fibers.

Types of rollers according to the final texture

The texture of the rollers can be completely varied and imitate brick, marble, wood, textiles, fur and even more complex patterns (braids, oriental patterns, waves, etc.)

Each of them allows you to create a specific surface. The richer the final texture should be, the deeper the pattern is cut on the roller.

It is worth noting that for each room it is necessary to choose its own wall texture and, accordingly, its own type of roller.

Imitation brickwork will look good in the hallway or work area kitchen, but completely out of place in the bedroom. Therefore very convenient option There will be a roller with replaceable attachments.

DIY roller for decorative plaster

Despite a more than wide range of factory-made rollers on sale, many prefer to make the tool themselves.

There may be several reasons for this: the desire to save money, which was already spent on repairs a lot, or the lack of availability of a roller with the desired pattern, or the desire to give the interior individuality with exclusive wall texture.

Whatever the reason, you can make a structural roller yourself in several ways:

To imitate brickwork, a foam roller is used as a basis. Ordinary stationery knife recesses are cut out on it in the shape of bricks. It is a mistake to cut out the bricks themselves, since after smoothing the plaster they will not be convex, but pressed into the wall, which will deprive the imitation of realism.

In order to reproduce a textile fabric, there is nothing better than the textile itself. A regular foam roller needs to be wrapped with a tape made of canvas fabric with a rough texture and secured with threads.

To imitate a marble surface, a plastic roller lined with a piece of genuine leather is ideal. It is better to sew casually, with folds.

To give the surface an effect natural boards, it is necessary to wrap the plastic roller with a narrow piece of dense textile or cover it with crinkled fabric.

To create a specific pattern, it can be cut out on the surface of the auxiliary roller. Foam or foam rubber is best suited for these purposes. It is worth considering that the foam rubber must be hard.

In some cases, various massage rollers and kitchen utensils (rolling pins, etc.) were used as a textured roller.

Roller technique for decorative plaster

In order for the final texture to meet expectations, the roller should be worked in compliance with a certain technology:

movement should go from bottom to top, chaotic movements should not be allowed, otherwise the structure will not be clearly defined;

for the same reason, the strips drawn with a roller should be located close to each other, but not overlapping;

the first stripes must be drawn using building level, otherwise there is a possibility of them being “overwhelmed” relative to the floor and ceiling;

work must be carried out taking into account the drying time of the plaster. Even slightly dried, it becomes much less plastic. It may be worth applying decorative plaster with a roller in fragments, then working the surface with a roller and only then proceeding to the next section of the wall;

The rollers are subject to wear. When long work a roller made of short-lived material, it must be replaced on time.

The structural roller is one of those tools that, in its simple design, contains a wide range of possibilities. To obtain the desired structure of decorative plaster, you just need to use a high-quality roller and follow the technology.

Make the room stylish and give it original design possible using high-quality finishing. Today, among the large abundance of materials, decorative coating of walls with plaster or paint, for which a tool is used - a textured roller, is popular. In order for the finish to have a beautiful appearance, it is recommended to consider in more detail all the nuances of using this device.

The design of the device is quite simple: rollers for painting walls are made of various materials and are attached to the handle by pressing. The cylinder itself is located on a solid metal rod, which is fixed to the handle. Rollers for decorative painting walls are used to create sinuous patterns and patterns that look very advantageous in classic and modern interiors.

To operate the tool, no additional skills are usually required. After liquid composition the future coating is diluted, the roller is rolled in a special ditch. This is done to avoid smudges during work - thus, the paint applies evenly, and the plaster is applied with a roller without leaving clots on the surface.

In the video: painting with a texture roller.

Important! Experts do not recommend using the same tool for different types coatings: upon application textured paint you will need one type of roller, and another type when using plaster. Besides, there is always the option self-made tool.

Roller materials for decorative wall treatment

Modern tools differ in the material of the working surface. Applying textured plaster using a decorative roller allows you to divide devices into several categories:

A textured roller creates beautiful textured coatings. In addition to these types of materials, foam rubber, polystyrene foam and fabric are also used. Rollers for textured plaster, made from foam rubber, are suitable for priming the first layer for further decoration. They also worked well when creating a bubble effect on a wall. Fabric analogues use soft plush material that forms original marks on the surface. The foam product is similar to a structural rubber roller, but is distinguished by its fragility.

Classification of rollers according to the texture of the finished pattern

The tools have a wide variety of structures, thanks to which the final ornament is obtained. Some imitate natural materials, others simply create a random design. All rollers can be divided into 2 groups:

Textured devices– capable of transferring materials such as fur, wood, textiles and crumbs onto the surface of the plaster natural stone. Using a textured roller, a relief is created, which is achieved thanks to the material used to make the tool. For the effect of uneven fibers, a fur roller is used; to create an imitation of natural stone, a rubber product with a special pattern in the form of loops is suitable. This device is used on a primed wall without the use of preliminary finishing.

Structural products. Plastering with a roller of this type involves applying a complex repeating pattern. This effect is achieved using the curly cutout on the roller. The peculiarity of their use is that the coating should be applied to a prepared wall with finishing. For example, when a plane is finished with paint or plaster without relief, then it is dried and decorated. To achieve a more beautiful ornament, processing is carried out using a figured roller, which has a specific pattern.

In addition, products are classified by roller width. They come in sizes from 30 cm and above. The wider the tool, the faster the composition of the textured paint will lay down, but by choosing a narrow tool, the chances of getting an attractive, clear structure are higher.

Do-it-yourself tool making

As you know, some finishing devices are expensive, so making the device yourself will be the way out. We invite you to learn how to make a textured roller with your own hands.

For the first option You will need a clothesline and an old, unusable tool with a reliable roller and a strong handle. Before making the device, wrap it with rope and secure the ends tightly. Depending on the frequency of winding, you can adjust the future texture, which will create various stripes on the wall.
The second method involves using an old foam roller. Cutting the roller in several places sharp scissors You can get a texture roller with an original effect for walls. The cuts can be combined with each other, made wider and longer - all this will be reflected on the plane.
Another way to make a textured painting tool is to use plastic bag. Wrap it around the wall roller and tie it with thread. It can be replaced with tape, which will add texture to the marks.

On video: creating a texture roller with your own hands.

Handymen also suggest making your own structural bead. This will require a little patience and imagination. To obtain high-quality coating, think carefully about your idea. You can also use the template when covering a wall with trim. To get it on the wall structural plaster, consider this option for making a roller:

Take old instrument, preferably foam rubber;
Cut from thick fabric figures of the same size;
Form fancy flaps from the cuts and twist them like origami;
Attach the resulting products evenly over the entire area of the roller using construction stapler or pins - the relief roller for plaster is ready!

Thus, you can create almost any conceived structure on the surface of the wall using available means.

Wall coating technique

In order for the plaster to last for a long period of time, it is necessary to pre-treat the wall. If you intend to use a textured roller to paint the walls, there is no need to paint the surface in the main color. When working with a structural tool, this procedure must be performed so that the patterns on the roller do not stretch ready mixture in the wrong direction.

Use the following tips to achieve the desired result:

Do not press the tool close to the plane, move carefully and slowly.
Using a textured decorative roller, start the next path where the border of the first pattern is. Do not apply the ornament overlapping.
When you reach the ceiling, press the tool towards the top. After that, work with normal pressure.
Corner areas must be treated with a brush - the roller will not fit into narrow joints.
If it happens that the relief ornaments are too convex, they can be corrected with a moistened sanding mesh.

Painting walls with a patterned roller requires care and smooth movements. Don't rush and keep the pattern even. Sometimes when working, a stencil made of dense material is used.

Advice! To create a “fur coat” effect, marble chips, textile fibers, you can resort to using a textured paint roller with a textured base. The material is applied to the walls, after rolling the tool in a container with paint. If excess is formed during work, it is removed with a spatula.

By using decorative rollers yourself, you can create an attractive surface no worse than any finishing specialist. Select a tool with the required structure and use your imagination - the result will definitely please you with its appearance.

When it comes to beautiful finish walls, rollers for decorative plaster along with the use of this material as an internal coating are a good solution. Of course, an effective texture can be achieved using other tools, for example, applying light strokes with a narrow spatula, but the most practical is a roller. It remains only to find out what forms this tool takes and what results can be achieved with its help.

What types of rollers are there for decorative plaster?

Initially, wall decoration was carried out exclusively with the help of paints; plaster was necessary only for applying frescoes to it. In this regard, only paint rollers were used, made from fur, and later from foam rubber, polystyrene foam and other artificial materials. But over time, new decoration techniques appeared plaster coatings, especially for the “Venetian”, which required the use and radical change of instruments. All kinds of applicators, stamps, combs and, of course, textured rollers, based on a large-cell foam rubber prototype.

Based on the materials, a distinction is made between the aforementioned foam rubber and foam, as well as rubber and leather rollers for decorative plaster. More exotic options are also possible, for example, homemade, carved from wood, that is, piece work. The texture of the surface of these tools can imitate marble patterns, brickwork, wood fibers and even mat weaving. Nozzles are also used for embossing simple and complex patterns, for which a repeating pattern is applied to the working surface, the end of which goes to the beginning. Large-pored foam creates roughness varying degrees depths.

Textured rollers to imitate various materials

If you want to create a relief on the surface of a wall by covering it with plaster, it is necessary that there is a certain structure on the surface of the tool. To obtain protruding prints, textured rollers must have recesses that reflect the selected pattern; if, on the contrary, the pattern on the wall surface must be extruded, use a work surface with a relief pattern. In particular, if we need an imitation of brickwork, we take an ordinary smooth rubber roller, make two annular channels, dividing the working surface into three equal parts, after which we cut out transverse notches on each of them in a checkerboard pattern. We get a rectangular imprint in each row, they will be bricks.

To imitate marble, just take a roller with an attachment made of crinkled leather or fabric. In this case, during operation, movements should be made uniformly, without lifting the tool from the surface for as long as possible. Another way to get a structural roller with your own hands is to wrap a rubber nozzle with a rope of the same material, making turns in any direction. This uneven work surface can be used to represent wood fibers. It is possible that the direction of the turns will have to be corrected to obtain greater reliability of the texture. And finally, by gluing a piece of coarse fabric onto a rubber nozzle, you can get an imitation of textile upholstery. Almost any imitation can be obtained with a foam nozzle by applying the desired pattern to its surface.

Structural rubber roller for producing complex patterns

As children, many people are fond of making stamps from erasers, which can be used more than once by rubbing graphite rod pencil or ballpoint pen ink. A structural rubber roller is approximately the same thing, only the pattern on it is closed around a cylindrical working surface. Once upon a time, such rollers began to be produced so that owners could make impressions on wallpaper for painting at home. However, over time there appeared ready-made wallpaper with different patterns, and special device It turned out to be unnecessary for decoration. A tool for finishing walls with plaster came in handy.

But if a regular nozzle with a slight relief can be easily used to apply a fairly liquid decorative composition, then is a curly roller with a pronounced pattern suitable for this purpose? Unfortunately no. The fact is that the textured nozzle with slight irregularities allows you to capture enough thick layer mixture, and in the process of applying it the layer turns out thicker in some places and thinner in others. If strongly protruding figures of the design are cut out on the working surface, only they will be imprinted on the wall, the rest of the space will not be covered with plaster.

But these kinds of tools are perfect for obtaining a pattern on an already finished surface. It’s not news that even the fastest-drying composition hardens in about twenty minutes. This time is quite enough to pick up a roller and roll it over the surface of the finished area. You just need to follow one rule: the movement must be performed from top to bottom, at the same speed along the entire length of the strip being decorated. The next pass of the tool must be made close to the previous one, without indents or overlaps.

How to make a structural roller with your own hands

Today, tools for creating a textured pattern on a freshly plastered surface are commercially available. They are made of rubber and have a stamp in the form of one pattern or another protruding strongly above the base. However, it is much more pleasant to do something unusual yourself in order to end up with a unique pattern. So, what do you need for this? First, a regular rubber roller for smoothing wallpaper. Secondly, you need to find dense, thick rubber about a centimeter thick (you can take a couple of dozen erasers, but this is a last resort). And finally, we need rubber glue.

We cut out a figure from a sheet of rubber or an eraser, for example, a plant leaf. If fragments of the pattern will be pasted at large intervals, the shape of the base does not matter, otherwise it is better to make the fragment so that it does not matter which side becomes the working one. The next element, in continuation of the plant theme, will be, for example, a flower. You can make stems, buds, berries, the content of the pattern does not matter, the main thing is that it is continuous around the entire cylindrical surface of the tool nozzle. All parts are fixed with glue from end to end; the metal rod (clasp) on which the nozzle rotates is usually curved in such a way that it does not at all interfere with changing the diameter of the nozzle.

The sizes of the machines, consisting of a handle, a yoke (metal rod) and a roller, can be different: short, within 30 centimeters, medium, from 35 to 45 centimeters, and long, from 50 centimeters and more. Special extension handles are also produced, from 70 centimeters to 4 meters.

To make the pattern as high as possible, it is advisable to round the working surface of all glued parts. This will allow the shaped elements to sink gently into the surface of the plaster, without disturbing the impressions with sharp edges. You should not rush and create a pattern as soon as the plaster covers the wall. The fact is that the fresh mixture will stick to the relief of the tool, get clogged between closely spaced elements and, accordingly, remain on the roller. It's best to wait about ten minutes (or longer, depending on the type of finishing material) to allow the composition to dry a little.

empstenup/ March 15, 2016 / /

Indoor wall treatment with large area V vertical plane involves the use various instruments. One of them is a roller for decorative painting. You can assemble this tool with your own hands from scrap materials, or you can purchase it already ready product. The roller is very easy to use. Additionally, sets of nozzles with different textures are sold. With their help you can create various effects on the wall.

Equipment

The design of the rollers is as simple as possible. The tool has working part, which is in direct contact with the walls, with the coloring composition. This is a plastic cylinder. Meet and wooden varieties, but much less often. The surface of the cylinder is covered with nozzles and materials with various properties. The quality of the work will depend on the characteristics of these coatings.

Metal bushings are pressed into the through holes. The latter are located at the ends of the cylinder. The clasp handle is attached to the axle, which itself is threaded through the holes.

The axle has a thread at the end through which the roller is put on. A corkscrew nut is usually placed here. Sometimes a locking pin is placed inside. It requires a recess with a different shape. The cylinder rotates freely around its axis due to the design features of the assembled form.

The tool handle has smooth surface or rough. If the tool is professional, the grip area is covered with rubber. To install the tool yourself on the bar, a special cavity is located on the end of the handle. Thanks to this, painting the upper sections of the walls does not take much effort.

Practical use

The working part of the tool is selected individually, depending on what texture the material needs to be applied with your own hands, what kind of coating is to be processed.

We first put the cylinder with the outer coating on the axle with our own hands. For professional tools There are so-called single cylinders. They are fitted with covers made from different materials.

Productivity will increase if you use rollers with only suitable texture with your own hands. This also allows you to apply the coating, changing the shading in different places, and using substances with different compositions.

If the wall roller is of high quality, then the paint is applied without splashes or other marks. And the coating itself contains no traces of wax. At making the right choice you can save a lot of time processing large areas.

Mounting type

The roller is in a thermo-glued version. In this case, using the thermosynthesis method, the fur coat is glued to the surface of the kernel. Such attachments are considered durable. That’s why they are often recommended to professional craftsmen. No seam important feature designs. But such devices themselves are more expensive compared to their closest analogues.

With glued fur coats. The parts are fixed directly to the core using an adhesive base. Most often, foam rollers are produced in this way. The quality and durability of the decorative finishing tool itself depends on the characteristics of the glue used.

With replaceable coats for painting. Plugs are used for fastening.

Fur coat materials

One or another working surface for painting must be selected depending on the features that will be encountered when performing painting work for walls. The materials used to make the case are the main difference between different models nozzles that are available on the modern market.

Based on the results of the work, the textures of the cover and the wall surface will completely correspond to each other. Covering capacity is the area of walls that can be covered with your own hands at one time. The length of the pile determines what this characteristic will be.

The following materials are most often used in production. They all perform the decorative function in approximately the same way.

A polyester paint roller is a cheap tool, but it cannot boast of durability. The coloring composition saturates the fibers well. The paint is transferred to another surface with no less quality. There is no pile on the finished coating.

Polyacrylic roller — great option for working with water-based paints. Or for formulations that contain a minimum of aggressive substances. They have piles of different lengths. The latter is determined functional characteristics tool.

Polyamide roller of artificial origin. Has high wear resistance. The material does not deform under the influence of aggressive substances. Therefore, it can be used to apply different paints with your own hands. The fibers most often have a length of 2 cm.

Rollers with wool fibers Perfectly distributed for walls paints and varnishes, have good absorbency.

The roller with velor for walls contains polyamide fabric. On top, the texture of the product resembles plush fabric. Suitable for use even with oil paints. The good thing about a roller is that it doesn’t splatter paint when applied.

Flock fibers are made from polyurethane. In an electrostatic field they stick to fabric bases. These are durable and strong coats. They are characterized by high wear resistance. Suitable for smooth surfaces.

Foam rubber is characterized by its ability to return to initial form after deformation. Almost no caking. Such devices will help to apply even water-dispersion paint. But the surface is not able to withstand chemically aggressive substances.

Tools with replaceable wall coats usually cost more. You should not choose such rollers if the work will be one-time.

A special paint ditch is a must-have addition to your purchase. This part is equipped with a ribbed surface. You can roll a tool soaked in paint over it, which will remove excess material that is not necessary.

Some different instruments for painting or replacement coats will be useful in situations where solvent-based formulations are used. It is recommended to wrap the instrument tightly in plastic bags when you need to store it in its original condition for several days.

Both painters and designers use the tools to the same extent. Convex patterns on the surface will allow you to create any pattern, not only abstract, but also quite specific.