All about craftsmen and homemade products. Electronic homemade products for radio amateurs and novice electricians

As they say, there is never too much space in the garage. Men who spend a lot of time in the garage will agree that in some cases every minute and every square centimeter of free space counts. This is why a garage handyman needs competent organization workspace. Various people help out and help here in every possible way. devices for storing building materials and work equipment, machine parts and other things necessary for work. To ensure that your electronic, garden and garage gadgets are always in their place, use the following devices:

    • stands;
    • shelves;
    • retractable panels;
    • racks;
    • organizers for tools.

For clarity, we also offer homemade products for the garage and home handyman do-it-yourself YouTube video will reveal all the nuances of organizing your workspace and suggest fresh ideas.

DIY crafts at home with your own hands

Man has been making homemade crafts since prehistoric times. Actually, all industrial processes are the improved once handicraft or home-made developments of folk craftsmen. Sometimes we don’t even think about the fact that we pay for things that we can do with our own hands. DIY homemade schemes are easy to find online, and the materials can be purchased at a hardware store or found at home.

For example, from a cardboard box and a piece of fabric you can make a convenient portable organizer for towels and other textile products.
The topic of storing all sorts of little things is inexhaustible, fortunately, as is the number of ideas. Good ideas for decor You can also draw from ordinary things - let them be buttons or empty tin cans.
Cool shelves are made from ordinary drawers. How do you like this idea?

As you managed to understand, if there is detailed instructions It’s not that difficult to make homemade products with your own hands at home. The video will help you understand all the nuances of this enjoyable activity. Useful tips, interesting ideas- Everyone should watch it.

DIY crafts for the garden and garden with your own hands

At the dacha there is usually some free time for creativity and arrangement of the surrounding space. That's why It's worth having a few fresh ideas on hand to implement them on your own summer cottage. Do-it-yourself country crafts at home can be brilliantly simple. From scrap materials you can make unexpected and extremely useful things for home use.

Ordinary pebbles turn into fairy-tale animals.From an old teapot It makes a wonderful flower pot.

Used tires– it has already become a classic in the world garden figures. Stylish lamps For country interior – do it yourself from an ordinary jar and candles (don’t forget about safety precautions).
– great idea for a small cottage.
Do-it-yourself homemade products for the garden and garden are often made by yourself, without unnecessary time and financial costs. Perhaps you had no idea how useful it is for household will turn out to be plastic bottles. Plastic bottles that have gone out of use can serve as the basis for an incredible decorative flower bed. Cool “blooming” pillars will significantly decorate your garden space.

Do-it-yourself garden furniture, successful homemade products: photos and drawings

In the previous sections, we told you about homemade products that will become indispensable for the household and home life. However, we should not forget about rest, before which, nevertheless, you will have to work a little. Cozy armchairs, various tables and benches, swings and hammocks- all this country and garden bliss can settle on your site. We invite you to familiarize yourself with photo instructions and manufacturing drawings. garden furniture. We have selected the best options for you.

A summer cottage is an area where you can give yourself the freedom to conduct numerous experiments and dream to your heart’s content. This manifests itself not only in interior design, but mainly in the design of a garden or vegetable garden. Inquisitive and inventive owners have long ceased to be guided by expensive and standard methods for arranging their plots, since there are a lot of alternative solutions in fact for all areas of activity.

There are several types of vertical beds that allow you to optimize the use of free space. Non-standard designs- a great opportunity to create interesting design garden, vegetable garden, summer cottage.

This type of beds is in most cases used for growing ornamental plants or herbs.

Materials for production:


Length drainpipes regulated in accordance with the wishes of the owner of the site. However, you should not make bulky beds, as they can complicate movement around the area.

Creating a bed

Stage 1. Create a container. To do this, take a drainpipe, cut it in half lengthwise and put special plugs on both sides.

Stage 2. We take the prepared metal holders and put them on the resulting frames for the beds.

Stage 3. We make holes in the pipe. They are made in those places where metal fasteners will be located.

Stage 4. We pass a cable or strong rope through the holes made.

Stage 5. Fix the cable/rope using fasteners.

Stage 6. Fill the resulting beds with expanded clay and soil.

Stage 7. Plant the plants in the beds.

Stage 8. We hang the pipes to the selected location. Sometimes a special wooden crossbar is installed for this purpose, or rather a structure in the shape of the letter “P”.

Step 9: Alternatively, a special design can be made for the pipes.

Important! A bed made of drainpipes is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four directions by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.

A bed made from a plastic bag is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.

Materials for production:

  • durable polyethylene film;
  • sewing machine;
  • priming;
  • seedling.

In order for the bed to be strong, it is recommended Special attention pay attention to thickness polyethylene film, which in this case will act as the “framework” of the structure. Minimum thickness films - 0.2 millimeters.

The process of creating a polyethylene bed

Step 1 . We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the bed being created. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the bed is twenty centimeters.

Step 2. Sew the rectangles together, leaving only the top part bag.

Step 3. We sew a handle to the future bed, the strength of which will allow it to withstand the weight of the bag filled with soil. It should also be taken into account that when watering the weight will increase.

Step 4. Fill the bag with fertilized soil.

Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary for planting seedlings in the garden bed.

Step 6. Plant seedlings.

Step 7. Regularly water the soil and add the necessary fertilizers.

With these simple steps you can get a cheap and useful garden bed.

An integral element of every summer cottage is a compost heap. This is the place where all sorts of biochemical reactions take place to create fertilizers.

To create fertilizers that will satisfy all the requirements placed on them, you should carefully consider several key steps: creating a container and directly making the compost itself correctly. Let's talk about each of them in more detail.

Stage 1. Take eight support posts of the same length.

Stage 2. Treat the bottom of the wooden posts with motor oil or tar.

Stage 3. We dig the posts into the ground so that they are reliable and stable. If the compost bin will be located next to the fence, then 4 posts (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.

Stage 4. Between each two adjacent posts we nail the crossbars so that we end up with three independent sections. Be sure to leave gaps that will serve as ventilation holes.

Stage 5. In two sections, we nail the boards horizontally to half the height of the pillars. In these places it is planned to create two small doors.

Stage 6. The remaining section will big door, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.

Stage 7. Install the covers. To do this, you can use one large solid board.

Stage 8. Install the pre-prepared doors.

Stage 9. We provide the doors with handles and latches.

Stage 10. We process the wood using special impregnations.

Stage 11. Paint the box in any color that suits your preferences.

Many gardeners mistakenly believe that any components can be dumped into a compost heap. In reality, to create the right biofertilizer, the “ingredients” must be carefully selected.

Among the required components compost heap the following components:

  • peat;
  • ash;
  • needles;
  • tree branches;
  • leaves;
  • hay or grass;
  • wood ash;
  • plant roots;
  • raw vegetables and fruits, etc.

All elements are randomly mixed in a heap. To speed up chemical reactions It is recommended to cover the pile with a tarpaulin (this is especially true if there is no box).

Trips to the dacha with the family require the presence of entertainment elements on the site that will delight children. The most common way to keep young summer residents occupied is a swing.

Building a swing yourself is not an easy task, but it is quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build convenient designs with a comfortable seating area.

Structural components:

  • two logs;
  • strong rope.

Indicators:

  • log diameter – 85 mm;
  • log length – 700 mm;
  • distance between ropes – 500 mm.

Making a swing

Stage 1. We stretch the ropes between the logs.

Stage 2. Wrap ropes around each log.

Stage 3. Let the ropes out.

Stage 4. Tighten the ropes to 3 knots.

Stage 5. Attach the swing to the tree.

Important: this swing is designed for only one person.

Garden path from scrap materials

There are several types of garden paths that you can easily make with your own hands.

Step 1. Remove the sidewall from the tire using a knife or saw.

Step 2. Cut the tires.

Step 3. Line the space with corrugated stripes.

Step 4. Paint the path with paint.

Step 5. Sprinkle with stone chips.

This economical option for those who don’t want to rack their brains and waste time on a full-fledged garden path. Tire paths are usually used for vegetable gardens, as they are easily laid in the ground.

Stage 1. Paint the corks in different colors.

Stage 2. Dig a small trench.

Stage 3. We drive in supports to strengthen the future path.

Stage 4. We construct the formwork using boards.

Stage 5. Install spacers along the edges of the trench.

Stage 6. Place crushed stone deep into the trench and compact it thoroughly.

Stage 7. Make a solution from sand, cement, glue and water.

Stage 8. Pour the solution into the trench.

Stage 9. Press in the plugs in random order. Smooth multi-colored stripes look interesting.

These are the simplest and quick ways make a garden path without purchasing expensive materials.

DIY tools

The expression “everything comes in handy around the house” turns out to be more relevant when it comes to cans. From this plastic container can be done a large number of irreplaceable tools that are actively used in the process of dacha work.

To make this tool, we only need a sharp knife and the container itself.

Stage 1. Cut off the bottom of the canister.

Stage 2. Mark a cut line for the scoop on the container so that the handle of the canister is the handle of the future tool.

Stage 3. Cut off excess material.

Due to these simple actions we get an excellent scoop with a comfortable handle.

Materials:

Manufacturing

Step 1. Wash the canister thoroughly so that no odor remains in it.

Stage 2. Cut the canister vertically into two parts.

Stage 3. We make a groove on the board using a woodworking machine.

Stage 4. Apply glue to the plywood and insert it into the bottom of the canister.

Stage 5. Paint the resulting shelf using a spray can.

Of course, this design will not withstand a lot of weight, but it is quite suitable for storing small parts.

Materials:

  • 40 cans;
  • scissors;
  • rope;
  • paper;
  • marker.

Stage 1. Pierce the top of the canisters with a knife.

Stage 2. Make a stencil from paper.

Stage 3. Apply it to the canister and outline it with a marker.

Stage 4. Cut out large holes using scissors.

Stage 5. We stack the prepared canisters in several rows, tying each row by hooking a rope under the handles of the containers.

Stage 6. We tie all the rows around the perimeter for greater strength.

Stage 7. If you plan to lean the cabinet against the wall, then drill it to the surface.

Stage 8. Place heavy objects - stones or bricks - in the bottom row.

The result is a fairly spacious and functional rack that will help get rid of the problem of storing many small parts.

Be resourceful and bold in implementing your ideas. Good luck!

Video – DIY crafts for a summer cottage

Video - We do it ourselves for the dacha

Since you have decided to become a self-taught electrician, then probably through short period time, you will want to make some useful electrical appliance for your home, car or cottage with your own hands. At the same time, homemade products can be useful not only in everyday life, but also made for sale, for example. Actually the build process simple devices at home is not difficult. You just need to be able to read diagrams and use the ham radio tool.

As for the first point, before you start making electronic homemade products with your own hands, you need to learn how to read electrical circuits. In this case a good helper will be ours.

Among the tools for novice electricians, you will need a soldering iron, a set of screwdrivers, pliers and a multimeter. To assemble some popular electrical appliances you may even need welding machine, but this is a rare case. By the way, in this section of the site we even described the same welding machine.

Special attention should be paid to available materials, from which every novice electrician can make basic electronic homemade products with their own hands. Most often, old domestic parts are used in the manufacture of simple and useful electrical appliances: transformers, amplifiers, wires, etc. In most cases, novice radio amateurs and electricians just need to look for all the necessary tools in a garage or shed in the country.

When everything is ready - the tools have been collected, spare parts have been found and minimal knowledge has been obtained, you can proceed to assembling amateur electronic homemade products at home. This is where our small guide will help you. Each instruction provided includes not only detailed description each stage of creating electrical appliances, but is also accompanied by photo examples, diagrams, as well as video lessons that clearly show the entire manufacturing process. If you do not understand some point, you can clarify it under the entry in the comments. Our specialists will try to advise you in a timely manner!