How to hang non-woven wallpaper, video, do it yourself. How to properly glue non-woven wallpaper: detailed instructions Glue thin non-woven wallpaper

How to stick non-woven wallpaper? Many people ask themselves this question, having already purchased several heavy, but very beautiful rolls. Working with this material is more difficult than with ordinary paper. Therefore, even before purchasing, you should think about whether it is worth purchasing trellises that are less expensive, but easier to use.

Non-woven wallpaper differs from paper wallpaper not only in structure, but also in the method of gluing.

You can answer the question by reading the pros and cons of non-woven trellises.

A few words about the advantages and disadvantages

The concept of “non-woven wallpaper” is collective. There are trellises made entirely of non-woven fabric. In others, only the base is made of interlining, and the front side is made of vinyl.

Interlining is called "improved paper" because this non-woven material made from cellulose and polymers. Just like paper, this material has many positive characteristics.

Scheme vinyl wallpaper with non-woven base.

1. Made from cellulose, non-woven fabric does not contain carcinogenic substances.
2. It is able to “breathe”, which makes the air in the room favorable.
3. Non-woven wallpaper is not afraid of changes in humidity and temperature, it does not “dry out” on walls in dry rooms and does not swell from moisture.
4. With the help of non-woven trellises it is easy to hide uneven walls. Vinyl, which is applied to the front side, has an excellent texture. This coating can be repainted up to seven times. A regular one will do for this. water-based paint, which is very inexpensive.
5. This material has practically no disadvantages, except for the relatively high price.

Still not sure about your choice and are afraid that gluing wide non-woven wallpaper is difficult? There is some truth to this, but there are other things to think about:

The main advantage when gluing wide non-woven wallpaper is the reduction in the number of joints.

1. The number of joints when gluing wide trellises is reduced by at least two times. This is very important for the aesthetics of the room.
2. Since the width of the strips is twice as wide as usual, the gluing time is reduced.
3. You can stick wide trellises even in a small and cramped room. The fact is that glue is not applied to them: they are smeared on the walls. Therefore, there is no need to look for a place on the floor or table to apply glue.

Another advantage will be of interest to those who like to frequently change the wallpaper in their home. Removing non-woven wallpaper from the wall is much easier than regular paper wallpaper.

Have you become familiar with the features of non-woven material and decided to purchase several rolls? Just remember to check that the code on the rolls matches: otherwise color shades may vary on each roll.

Now it’s time to think about how to properly glue wide non-woven wallpaper and what you will need for this.

Return to contents

Preparation for gluing

In order not to be distracted from gluing while working, everything necessary tools needs to be prepared in advance.

You will need:

To glue non-woven wallpaper, you need to buy special glue.

1. Glue. It is purchased at the same time as wallpaper. The instructions for them usually indicate that you can choose between special glue for non-woven fabric and universal, suitable for all types of finishing materials. Practice shows that universal glue is less reliable.
2. Device for wetting walls, spatula for removing old decorative covering. You cannot glue non-woven material onto an unprepared wall.
3. Primer. She will have to treat the wall to enhance adhesion.
4. Scissors for cutting strips.
5. Knife for cutting off excess.
6. Roller for applying glue.
7. Soft cloth for leveling trellises and removing excess glue.

It’s not difficult to prepare a wall yourself, but gluing wallpaper is easier with a partner. Therefore, before starting work, it would be a good idea to enlist friendly support.

Work begins with preparing the wall.

The old coating is removed from it. If the wall is uneven, has chips or large cracks, then it is recommended to repair them with putty. Then the wall should be coated with a primer. It will help not only strengthen the adhesion of the wall and the finishing material, but also reduce the amount of glue. When the wall is completely dry, you can begin the main stage of work.

Return to contents

How to properly and quickly stick non-woven wallpaper

Before starting work, dilute the glue. How to do this is usually written on the packaging. It is important to ensure that the composition is not very thick or liquid.

While the glue is infusing, you should cut out the wallpaper. You can, of course, cut a new strip after sticking the previous one, but such fuss will take too much time, so cutting is done first.

On the wall, mark with a pencil the place where the first trellis will be attached. This should be a corner located next to the window. Using a plumb line, draw a vertical line on the wall. It is needed to prevent the trellis from “falling on its side,” because in many apartments the floor and ceiling are not always parallel. Cut a strip of the required length, then measure and cut the next one. When cutting, you need to leave 5-10 centimeters over the measurement. If the walls are uneven, these centimeters will be very useful. The excess can be cut off with a knife. When all the pieces are cut, start gluing.

Technology for gluing wallpaper in a room.

1. Using a roller or wide brush, apply glue to the place where the first trellis will be glued. This should be done so that the adhesive strip is 2-3 centimeters wider than the trellis. You need to make sure that the glue saturates the wall well, but its excess does not flow down. Too much thick layer will make work difficult and spoil the appearance of the finished wall.
2. Climbing onto a chair or stepladder, place the first trellis against the ceiling so that a small margin remains on top. It’s good if your partner holds the bottom of the lane. If the work is carried out by one person, then the cut trellis can be rolled up so that the side coated with glue does not cling to the wall and does not complicate the process. Place the strip in place and press it firmly with a cloth, roller or rubber spatula, begin to level the wallpaper, while simultaneously removing excess glue. The movement should resemble a Christmas tree. When the entire strip is glued, a roller is passed over it again to finally get rid of excess glue.
3. All the following strips are glued in the same way.

For those who have already dealt with wallpapering, the question often arises: what is the right thing to do? Glue the interlining end-to-end or overlapping. The answer is clear: dense, heavy material You can only glue end-to-end. Then the joints of the trellises will be invisible. Even in corners, which are often uneven, overlapping glue should not be used.

The excess is cut off after the wallpaper has completely dried.

Return to contents

Nuances you need to know

It’s easier to do any job if you familiarize yourself with little tricks. Here are a few such techniques that will help you achieve the ideal look of your walls after wide non-woven wallpaper is pasted on them. These tips to make the process easier will help you achieve the perfect result:

1. If the wallpaper has a pattern, remember that it has a top and a bottom. A trellis glued upside down will ruin the design.
2. In order to apply wallpaper under a socket or switches, you must first unplug them and remove the cover. Solid strips are glued, but in place of future devices, a sharp knife is used to cut the non-woven material crosswise. After drying, cut out places for sockets and put the covers in place.
3. To ensure that the wallpaper fits together well in the corner, you can do this. Place two strips on both sides and place them on top of each other so that they overlap at a distance of 5-6 cm. Press down the junction with a spatula and cut with a sharp knife. The joint turns out perfect.
4. While working, it is important to ensure that the edges of the strips fit well against the wall. If the glue on the wall has dried out, you should additionally lubricate the edges of the trellises.

Remember to monitor your work from the far end of the room. It is very difficult to spot errors up close.

Today you can find seamless wallpaper 3 meters wide on sale. Their gluing pattern differs from the usual one. Such wallpaper begins to roll out on a wall coated with glue not from top to bottom, but from one corner to another. At the same time, you will have to ensure that the top edge of the covering lies flat against the ceiling. For such work it is better to hire professional craftsmen.

Similar materials

You should know that there is no better quality and comfortable material for pasting walls than non-woven wallpaper.

If you plan to use fillets to decorate the ceiling and walls, then initially you need to stick them on, and then start gluing the wallpaper.

How to glue non-woven wallpaper: technology

Material similar type has the following advantages:

1. The roll width is approximately 1 m, resulting in much fewer joints in the room than if used regular wallpaper.
2. Increased level of material wear resistance and abrasion resistance.
3. Can be hidden small cracks and other defects on the base of the wall.
4. If you want to change the wall decoration, old material can be easily removed from the wall when dry, that is, you do not need to waste time soaking the wallpaper.
5. High light fastness.
6. You can cover the wall from a roll. In this case, the working area will be reduced to a minimum.
7. Can be produced wet cleaning with improvised means.
8. The material is capable of passing steam and air, but it will not change its texture and size, which cannot be said about ordinary wallpaper.
9. Minimum amount of debris and dirt. This is due to the fact that the glue will need to be applied exclusively to the wall.
10. You can paint it many times, which allows you to change the interior design.
11. The material is made from environmentally friendly raw materials.
12. The wallpaper meets all sanitary standards.
13. The material can be glued both on walls and on ceilings.

Scheme for cleaning the wall from old decoration: a) cleaning, b) smoothing, c) moving the tool.

Before gluing meter-long non-woven wallpaper, you will need to measure the height of the walls. If the junction of the wall and the ceiling is decorated with a fillet, then it must be glued before wallpapering the walls.

The height will need to be measured from floor to ceiling or fillet, if the latter is used. To the value that will be obtained, you will need to add 10 cm for reserve.

On the wall from which you will begin gluing the wallpaper, at a distance of 1 m from the corner, you will need to mark a strictly vertical line, for which you need to use a plumb line and a long ruler.

A plumb line can be made with your own hands from a cord of the required length, and a heavy bolt or nut must be tied to one of its ends.

Elements that will be needed to glue the non-woven material:

1. The wall finishing material itself.
2. Construction sharp knife.
3. Putty knife.
4. Primer.
5. Putty.
6. Special glue.
7. Plumb line or long ruler.
8. Rag.
9. Meter.
10. Wallpaper roller or brush.

Carrying out all preparatory work

Before gluing wallpaper you will need to prepare the wall. You need to make sure that the wall is completely flat and has no bumps, cracks or any other noticeable defects. The base will need to be thoroughly cleaned of the old coating.

To make it easy to remove old wallpaper, you need to wet the coating. This can be done using water and a rag. The wetted material can be removed from the wall using a putty knife.

If the wall is not perfectly flat and you need to renovation work before gluing the non-woven material in the corners and the rest problem areas, you will need to perform putty. After this, the wall must be primed with glue or a primer. deep penetration. If glue was chosen, it is recommended to make a weaker mixture.

Speaking about how to glue non-woven wallpaper, you should know that there are 2 basic rules that must be followed:

1. The surface on which you plan to glue the non-woven material must be dry and even.
2. There should be no drafts or air currents in the room, for example, from an air conditioner. All windows in the room must be tightly closed.

Next, you will need to prepare the material for gluing and painting. To do this you need to cut them into strips. It is important to remember that you need to leave allowances of 10 cm on each of the canvases. It is important to remember to follow the drawing, if necessary.

How to apply glue to wallpaper?

You need to start gluing the material from the corner, from top to bottom. In this case, you will need to sequentially smooth it in the vertical direction, using a roller or wallpaper brush.

You need to press lightly so that the new layer lies flush against the edge of the pasted one.

The glue will need to be spread on reverse side material, as is done in the case of ordinary wallpaper, but exclusively on the wall.

Scheme for applying glue to wallpaper: 1. Spreading the canvas with paste. 2. Fold the canvas in half.

It's important to choose the right glue, which is suitable for gluing non-woven wallpaper. Any store employee who specializes in selling materials for construction and finishing can help with the choice.

It is important to know that the advantage of such material is that in this case it is not necessary to withstand a certain amount of time to impregnate the wallpaper.

This material can ensure stability of the shape and size of the sheets. Before applying glue to the wall, it is recommended to read the information indicated on the packaging of the adhesive mixture and on the wallpaper roll.

The glue must be applied to the wall, which has been previously prepared.

How to glue non-woven wallpaper: sequence of work

After applying the adhesive solution, you need to take the first strip of wallpaper, adjust it in height, and then stick it along the broken line on the wall. The other side needs to be turned at an angle. Don't worry if you can't get an exact match at the top of the wall because the wallpaper that will be sticking out can be trimmed at the end. First you just need to tuck them. Next, you need to start smoothing the material, expelling the air from under it. To do this, you need to use a wallpaper roller, spatula or a piece of clean cloth.

After smoothing, you need to take a wide metal spatula and a sharp knife. The spatula is used as a guide for the knife; it is applied to the joint between the wall and the ceiling. After this, you need to cut off the excess wallpaper with a knife. If you can't cut the damp wallpaper, you'll need to wait until it dries and then try cutting it again. If the wallpaper is not completely glued in some places, it may be necessary to re-glue the material.

How to glue meter-long non-woven wallpaper end-to-end?

Each layer is glued end to end with the previous one. In this case, problems will not arise if the wall was leveled at the preparation stage.

In the process of gluing a new layer butt to the previous one, you will need to adjust its height. A clear joint cannot be achieved by stretching the material. Even if you manage to do this at first, after the glue dries, the wallpaper will come apart.

If you can’t achieve a perfect joint and use monotonous wallpaper without patterns, you can use a trick. The canvas must be glued overlapping with the previous one, the intersection should be about 2-3 cm. Then, using a sharp construction knife you need to make a through cut in the place where the blades intersect. It is important to cut through 2 layers at the same time. At the end, you need to remove the scraps, coat the joint with an adhesive mixture and straighten the layers, obtaining an even joint.

How to glue wallpaper in hard-to-reach places and corners?

Particular attention should be paid to the process of wallpapering walls in hard to reach places. In this case, we mean the locations of sockets, batteries, switches and the ceiling. The edges of the wallpaper must be coated with an adhesive mixture to ensure that they are securely attached to the base of the wall. It is highly recommended not to allow the adhesive solution to get on the main side of the canvas. If for some reason this happens, you will need to quickly remove the glue from the wallpaper using a damp cloth. Next, the wallpaper must be wiped with a dry base.

You need to be careful when gluing non-woven wallpaper next to sockets and switches, as the electricity will need to be turned off. Before doing this, you should measure what size strips will be needed, and then cut them out.

After the adhesive mixture has dried, you need to make a recess in the hole. required sizes. Upon completion of all work, you will need to screw all sockets and other elements into place.

If you plan to glue this type of material to the ceiling, you should know that the technology is no different from wallpapering walls. The only difference is that in this case you need to find an assistant who can hold the wallpaper.

In the corners, the canvas must be glued so that the overlap on the adjacent wall is approximately 2-3 cm. If the layer is folded during the gluing process large sizes, then it must be cut with a sharp knife to the required size.

There are 2 options for how to stick this type of finishing material in the corners of the room:

1. The first method is used when you need to paste material with a pattern. The canvas must be glued from the corner, while the overlap with the other layer should be approximately 2-3 cm. The overlap can hide the defect if there is an uneven corner.
2. Another method is suitable for plain wallpaper. The canvas should be glued from the corner, then cut through 2 canvases with a knife, remove the excess and finally straighten the joint.

How to paint non-woven wallpaper correctly?

If, after wallpapering a room, you need to paint the material, then you need to know that water-based paints, which are resistant to abrasion and cleaning, are best suited. It is recommended to use latex or acrylic paints, which have the effect of silk. If you choose these materials, you can emphasize the texture features of the wallpaper.

The first coat of paint is applied approximately 24 hours after the glue has dried. To do this, you need to use a roller that matches the type of paint purchased. An employee of the same store will help you choose it. The second and all other layers of paint are applied after a few hours.

Gluing such wallpaper is quite simple, it is only important to prepare the base and follow the sequence of actions.

Wallpapering is the most important stage decoration of any interior. But every wallpaper is applied differently. After all, they differ not only visually, but also in the key material from which they are made. It's one thing to glue textile wallpaper, and others, for example, non-woven ones.

Works with wallpaper professional master from construction company

But what exactly are the differences? How to glue non-woven wallpaper so that you can do it yourself without any problems? In fact, everything is not so complicated, the main thing is to just understand general principle. So let’s figure out exactly what to do if you prefer wallpaper of this particular type.

What kind of wallpaper is this

In general, there are many types of wallpaper, for example, paper or fabric, but non-woven wallpaper is now one of the most popular. They have excellent characteristics, they are easy to stick with your own hands, they look very interesting and are suitable for most rooms.

It is worth distinguishing between two types of such wallpaper. Some are purely non-woven, others have a purely non-woven base and have a vinyl covering. The second type is popular because it copes better with moisture, so such wallpaper can be washed with your own hands. But pure non-woven wallpaper is more breathable, which means there is less chance that a large number of mold. However, it is necessary to choose based on specific needs.

Wallpaper with silver glitter in the living room

Classic non-woven wallpaper is usually called, they often have some kind of texture without a color print, so you can paint them with your own hands in a convenient way, and the paint will adhere to them much better than, for example, textile ones. However, there are also variations with prints. In general, the choice of non-woven wallpaper is huge, so you can safely choose their variations for yourself. But no matter what you choose, it is very, very important to hang the wallpaper correctly.

Preparation

Before you hang non-woven wallpaper recently purchased in a store, you need to carry out competent preparation. Without it, the gluing efficiency will not be as high; the wallpaper simply will not stick so well. So don’t be careless about this, do everything right, especially since it’s quite easy to do it all with your own hands, but the result will please you long years.

We begin preparations for repairs, dismantling old paintings

To begin, accurately measure the height and width on each side of the room. Approximately estimate how many rolls you will need, but do not forget to leave a few centimeters in reserve on each side. After this you need to purchase required amount non-woven wallpaper. Please note that you need to pay attention to the specific batch number that is written on the roll. Even if the wallpaper is visually similar, if they have a different batch number, then the pattern may be different, as a result there will be a slight imbalance in the room.

Leveling walls with plaster according to beacons

Next, you need to level the walls with your own hands. This is especially important if the wallpaper is wide and does not respond well to unevenness. You also need to unscrew all the sockets, they will greatly interfere. It is critical to insulate the wires, otherwise liquid may get inside the boxes. All walls are treated with primer and dried thoroughly. Moisture can not only create conditions for mold, but also simply prevent the wallpaper from sticking well. So it should be avoided.

Selection of glue

Not any type of glue is suitable for non-woven wallpaper. However, textile and vinyl also require their own mixture. So different glues For different wallpapers are different. Be sure to consult with a qualified salesperson in a specialized store, or at least carefully study the instructions for what this or that is intended for.

The peculiarity of non-woven wallpaper is that it soaks quickly, so you don’t need to devote some time to it, as often happens when you take textile or vinyl wallpaper.

In general, individual mixtures may have various features and methods of use, so be sure to read the instructions after purchasing, although it is clear that you do not want to do this at all.

Good French wallpaper glue

Before directly gluing non-woven wallpaper, you need to understand what the basic principle of applying glue is when gluing them, and only then start gluing. The peculiarity here is that with ordinary wallpaper the back side of the material is smeared, but with non-woven wallpaper it is necessary to smear only the wall. You need to smear it lightly, evenly, and you also need to press the material. The material is glued from the corner, from top to bottom. It is smoothed vertically using a wallpaper brush or roller.

Sequence of gluing

In order for such wallpaper to be hung correctly, it is necessary to adhere to a clear sequence of actions.

Non-woven wallpaper is ready for gluing

1. First, you apply adhesive to the wall, then take the first strip of wallpaper and adjust its height. Using a method convenient for you, measure the verticality of the sticker. If the wallpaper does not match a little on top or bottom, then it’s okay, this happens when you glue wallpaper with your own hands. They can then simply be trimmed a little.
2. Next, the material is very carefully smoothed out so that no air remains under it. You need to try to get rid of all the bubbles that may form under the coating.
3. Then take a wide spatula and a sharp knife. Using a spatula as a guide, you need to cut off the excess wallpaper, and then glue it in those specific places where it is not glued well enough.

With quality work done, the joints of the canvases are not visible

While doing all this, do not forget that you cannot create excessive drafts or heat in the room. The room should be slightly ventilated, but not so much that it could negatively affect how the wallpaper adheres to the wall. Before gluing non-woven wallpaper, understand the temperature conditions.

A few tips on how to properly hang non-woven wallpaper so that the gluing is done as efficiently as possible. good level.

Use in the room light wallpaper

• Do not forget to read the manufacturer's instructions for specific wallpaper before hanging non-woven wallpaper. Although non-woven solutions are quite similar, in some cases the gluing may be slightly different. For example, although it was previously written that it is enough to smear only the wall, some manufacturers recommend also smearing the wallpaper, as when you glue textile or vinyl options with your own hands.
• Coat not only the surface of the wall where you directly glue the wallpaper, but also a little large area. This will allow the edges to adhere better to the wall surface.
• Wallpaper with a deep texture should be pasted more carefully; it is best to press it using a wallpaper roller, which, moreover, should not be pressed too hard, otherwise the surface of the wallpaper can be deformed, then the roll will have to be changed.
• When wallpapering, excess glue may remain on the wall. You shouldn’t leave it on; when it dries, it won’t become 100% transparent and will leave unpleasant stains. Take a damp sponge and then gently wipe the area where the glue was applied. Try not to unnecessarily touch the wallpaper or wet it. Although non-woven fabric does not wrinkle from slight moisture, it is still better to protect it from water.

Wallpaper work has just been completed

It’s not so difficult to figure out how to glue non-woven wallpaper. The main thing is to clearly understand whether this particular wallpaper is really optimal in your situation, and not, say, textile or paper. After all, if you make an incorrect decision, then it will be much more difficult to change something in the future.

Re-pasting wallpaper, cleaning the surface with your own hands and spending money again is something that would be good to avoid. So do it right choice immediately - and no problems will arise in the future; non-woven wallpaper is very resistant and durable, therefore it will delight you for an extremely long time.

Non-woven fabric is a material made from cellulose fibers that are bonded together with a polymer. This is so-called "improved paper" because it is more durable and abrasion resistant, with high level fire resistance. Non-woven fabrics are often used for painting. By repainting them several times, you can quickly update the interior of your home. How to glue non-woven wallpaper? An article written by our expert is devoted to this topic.

The advantages are:

• thanks to the non-woven backing, it is possible to mask small unevenness on the surface of the walls when wallpapering;
• they have textured surface which reminds decorative plaster;
• This perfect option if you need to change the look of the room without spending a lot of money, effort and time;
• in the absence of a vinyl layer, non-woven wallpaper can freely allow air to pass through, and because of its walls they “breathe”;
• high degree of fire resistance, and therefore fire safety;
• they are easier to stick than paper ones: you don’t need to lay the wallpaper on the floor to spread the glue;
• they can be washed with water and detergents;
• vinyl with a non-woven backing does not accumulate dust, so such wallpaper is a salvation for those who have bronchial asthma or allergies;
• characterized by resistance to fading when exposed to sunlight;
• They are easier to remove from the walls than paper wallpaper.

Flaws:

• upper layer sensitive to various kinds damage, because if there are children and animals at home 3D wallpaper will quickly become unusable;
• Pay attention to environmental friendliness when choosing. Non-woven fabric is called large group materials that are characterized varying degrees environmental safety. When purchasing cheap wallpaper, you take a risk, because... they are most often made from low quality raw materials. Buy wallpaper from trusted brands;
• Their cost is higher than that of paper ones.

What will you need for pasting?

If you are wondering how to properly glue non-woven wallpaper, we recommend reading the article to the end and preparing everything you need for gluing.

You will need wallpaper, a spatula, a roller or brush, special glue, a brush, plastic corners and a level.

Preparing to cover walls with non-woven wallpaper

Preparation and marking of walls

Preparation begins with removing old wallpaper and dust from the walls, as well as eliminating surface defects and removing a layer of paint. At a minimum, it is worth treating the painted surface with medium-grit sandpaper and then with a primer.

Non-woven wallpaper has high-quality edges, so you can glue them end-to-end. The panels that are located next to each other look like single canvas. Such wallpapers are often produced in wide format, so let’s talk about gluing wide wallpaper. It is recommended to start work from the corner of the room. From the corner, using a level, draw vertical lines at a meter distance from each other.

When gluing, try to stick to these lines. The width of the wallpaper is usually 1.06 m, so there is a 6-centimeter margin, which is useful when creating joints in the corners of the room.

Preparing wallpaper

When the wall markings are ready, prepare the wallpaper. It is better to cut blanks for all the walls in the room. The degree of complexity of this work depends on the pattern on the wallpaper, but if there is none, there will be no difficulties. Before cutting the workpiece, measure the height of the wall at its various points (for example, every 30 centimeters). When you are sure that the height is the same on all walls, cut the wallpaper to the size you need.

When gluing wallpaper with a large pattern, select it: while marking, make sure that the patterns match. It is important that there are no mistakes and that you do not have to glue pieces of wallpaper above the floor or under the ceiling.

Glue preparation

Use special glue (it is thicker than usual and does not leave yellow spots after drying). For vinyl wallpaper, it is better to use glue that is designed specifically for heavy wallpaper. Pay attention to the markings on the packaging, as well as the recommendations of the manufacturer, so as not to make a mistake in choosing the glue.

Step-by-step instructions for gluing non-woven wallpaper

How to glue non-woven wallpaper? Let's give step by step instructions for wallpapering.

1. The glue is applied in a thick layer with a roller or brush to a width slightly larger than the width of the wallpaper sheet, then a dry sheet is applied. The strips are glued end to end: doing this carefully, you will not see the joints. When gluing with an overlap, they will have a sloppy appearance, because the thickness of the surface will be higher than usual, and this can cause a damaged interior.
2. It is not difficult to join the canvases, the material is dense, it does not tear or stretch. The sheet can be removed without consequences and pasted again.
3. You need to start pasting from the corner. At the place where the 1st panel ends, draw a vertical line. Focus on it when gluing the strip. The quality of pasting depends on the 1st sheet, since other strips are glued butt to it.
4. Apply glue to the wall in 2-3 stripes, apply the 1st sheet to the wall, starting from the top, pressing it and smoothing it with a spatula, removing air bubbles. Make sure that the edge coincides with the vertical line you drew.
5. If the glue has dried, turn off the edge of the wallpaper and apply the roller or brush to the wall again. When finally gluing the strip of wallpaper, cut off the excess with a spatula or a utility knife under the ceiling and above the floor. Do not align the bottom edge too carefully; you will cover it with a plinth.
6. Glue next stripes, focusing vertically on the canvas next door and tracking the coincidence of the pattern, paying attention to the tight fit at the joints. The glue from the wallpaper on top can be wiped off with a brush or cloth, no traces will remain.
7. Cut the wallpaper in the corners and then glue it end to end. Do not cover the corner with a single strip, otherwise sloppy folds will appear in this place. After completing the work, make sure that all the canvases are held securely; if they have come loose in some places, coat them with glue and press them against the wall.

Taping corners and awkward areas

When gluing, maximum attention should be paid to the corners in the room, carefully coating them with thick glue. It is recommended to use plastic corners, which can be attached to wet putty to get a neat result.

What to do if bubbles appear?

If bubbles appear during the gluing process, move the piece of wallpaper away from the wall and re-glue it, carefully leveling the surface.

If a bubble appears after the non-woven wallpaper has dried, you can take a thin needle and pierce the place where it appears. Then you need to level the surface with a spatula and stretch the wallpaper.

You can inject glue under the wallpaper with a syringe; they will ensure the necessary tightness of the wallpaper to the wall so that the bubbles disappear.

How long does wallpaper take to dry?

When drying wallpaper, the humidity and temperature in the rooms are important. Sudden changes in humidity and sudden movements of air masses should not be allowed, therefore it is necessary to close all doors and windows during drying.

Using heaters when drying is not advisable; it is better to dry the wallpaper naturally with good ventilation.

How to care for wallpaper?

If you purchased washable flaseline-based wallpaper, the degree of its protection against water is indicated on the roll.

The symbol of 3 waves is evidence that the wallpaper is not afraid of moisture, it can be wiped with a wet cloth, the symbol of wave 1 allows you to wipe it with a damp cloth, the symbol in the form of a brush can be washed with.

Washing embossed wallpaper is not allowed.

Is it possible to glue non-woven wallpaper onto old wallpaper?

When pasted on top of a layer of wallpaper, the old panel may come off. In addition, there may be color inconsistencies, especially if the bottom layer is darker. If you remove a layer of old wallpaper and leave the base on the wall, then gluing a new canvas is advisable only when the base is firmly in place. They should be the same type as the new wallpaper.

Do not leave the paper base if you want to stick wallpaper that does not allow steam to pass through, for example, if it contains metal. Walls with applied oil paint or varnish - an unsuitable coating for non-woven wallpaper. If you have pasted something on them, do not rush to remove the old layer of covering; it is better to paste a new layer of wallpaper on top of the old one, making sure that they adhere securely.

In stores there is a special product for replacing wallpaper, which can be applied to a dry surface before gluing, then after the end of its service life it can be easily removed. Thanks to its composition, the product easily penetrates into the structure of old wallpaper. They can then be removed without wetting the wall, in dry form.

When removing old non-woven wallpaper, take it by the edge (for example, near the baseboard) and slowly separate it from the backing. There is no need to lubricate the wall, front layer will come off entirely or in strips. If the base holds well and no damage is found, then new sheets can be glued on top.

If the base begins to peel off in pieces, and the top layer cannot be removed in places, then you need to remove 2 layers entirely, otherwise the base will new finishes it will turn out to be of poor quality.

1. The backing of old non-woven wallpaper is resistant to damage, strengthens the walls, and prevents cracks from occurring. You need to treat this base with a layer of primer and you can glue wallpaper, apply decorative plaster, etc.
2. First of all, it is worth considering that non-woven fabric is a transparent material. If the layer of vinyl or paint is not thick enough, uneven shade of the wall may be detected through the wallpaper. If the wall is not carefully plastered, for example, only in places where sheets of drywall are adjacent to each other, this will be revealed if the wallpaper is light. Before sticking, apply non-woven wallpaper to the wall, turn on bright lighting and look for dark spots. If there are any, you must first even out the color of the walls. If the wallpaper needs to be painted, it is better to paint it with 1-2 layers of paint so that there is no show-through.
3. When repainting, even if it is done several times, the structure of non-woven wallpaper does not change, but strength and sound insulation increase.
4. Other repair and finishing work in rooms with wallpaper pasted cannot be carried out during the drying period.

Conclusion

By re-pasting non-woven wallpaper several times, you can quickly update the interior of your home without spending a lot of time, effort and money. We hope our article will help you with this!

The walls at the entrance to any room are the most contemplated objects, and every owner strives to make them not only ideal, but flawless. Today there are a lot of ways to decorate them unique solutions. They can be painted, they can be done decorative stucco or cover it with wallpaper. It is the latter method that is the most common, because with the help of this material, and even with a beautiful textured pattern, you can create a truly unique environment. Besides more modern technology make it possible to produce wallpaper that can be painted several times. These include non-woven ones. In this article we will look at the technology of gluing non-woven wallpaper, but first, we will get acquainted with their types and the basic principles of selection.

Types of wallpaper and their advantages

Non-woven wallpaper is one of the the best materials for finishing walls and ceilings. What are their advantages? They, being the material natural origin, have excellent breathability due to their porous structure. Gluing non-woven wallpaper onto the walls allows them to breathe, thereby preventing the formation of mold and mildew. They can also be repainted many times. There are models on sale that can withstand up to 10 tinting cycles with water-based latex paints. At the same time, the wallpaper only becomes stronger and more resistant to stress. But due to the latex powder dispersion, the porous structure of non-woven wallpaper changes its textured appearance and with each layer of paint they become less attractive.

Foundation preparation technology

High-quality wallpapering of walls with non-woven wallpaper should be carried out only on surfaces. They should not be smooth, but also even. Lumps and pits on the surface will in any case lead to deformation of the sheet or distortion of the joining line. And this, you see, will look awkward at such and such a cost of wallpaper.

To level the walls, it is necessary to use putty followed by grouting. And before gluing non-woven wallpaper? The wall must be thoroughly coated with a high penetration primer. Non-woven wallpaper is quite heavy finishing material, therefore, they require a strong and reliable base with high adhesion rates. For simple wallpaper It is enough to use the glue itself as a primer, but for non-woven materials this can play a cruel joke in the future.

The walls are covered with non-woven wallpaper according to the markings. Usually experts recommend starting from far corner or from the window. But this was true when thin wallpapers with a special edging for overlap were produced so that the seams were least noticeable. Today, technologies require a more responsible approach and direct joining of sheets in a single plane. Therefore, we start marking from any convenient and as level place as possible. It is also necessary that the first sheet lies on it without bends or cuts. This place could be a window opening, a door, or even a corner.

Apply markings

Using a plumb line and a tape measure, a distance equal to the width of one sheet is measured from the starting point and a vertical line is drawn with a soft pencil, preferably gray or a similar color. Next, we continue marking from the existing line along the entire perimeter of the room with periodic monitoring of the verticality of the line. When hitting a corner from one wall to another, you need to make a small overlap. It can be from 1 to 2 cm. This is necessary in order to avoid glare due to the uneven geometry of the corner. It can then be easily removed using a level tool (a long spatula or rule) and a sharp construction knife. External corners are also circumvented in the same way.

That's it, the walls have been completely prepared for gluing non-woven wallpaper, you can start cutting the wallpaper sheets. Non-woven wallpaper should be glued to the newly applied wall surface, but you should not apply it to the wallpaper itself. This will cause them to become over-saturated, which can lead to deformation and loss. appearance. In addition, from long-term storage When rolled with the pattern outward, the wallpaper acquired a characteristic spiral shape. To correct this, each cut sheet is rolled loosely in the opposite direction and placed to wait in line at its place. This will allow you to spend less time during the pasting itself.

Important to remember! If you are new to this business and doubt that you can glue the butt joint, then it is recommended to paint over each place with paint to match the color of the wallpaper. This will eliminate the possibility of highlighting white glimpses of the wall against the background of the color pattern.

Technique for wallpapering walls

We applied the markings, prepared each fragment, stocked up with a stepladder and a brush, a soft roller, a wallpaper brush and a plastic spatula, and you can get to work.

We dilute the glue according to the instructions. Here it is important to pay attention to the consumption of heavy wallpaper and light ones. Manufacturers also indicate the glue consumption when applied to both surfaces and to one.

The glue must be diluted with water. room temperature. To do this, pour the required amount into a container and, continuously stirring with a wide stick, pour in the glue in a thin stream. It is important here to prevent the formation of lumps during crystallization of the mixture. If they have formed, they can be easily removed with a regular reinforcing mesh. It is enough to lower its edge into the container and stir the composition. The clots themselves will stick to the mesh.

The technology for gluing non-woven wallpaper involves applying glue only to the walls with a soft roller. If this condition is not met, they may swell and rupture. Then the prepared sheet, folded in the opposite direction for leveling, is unfolded and carefully applied to the surface. Leveling it must begin from top to bottom from the center to the edges, but just do not rub. And roll it out with a roller or level it with a special brush. It is usually used for wallpaper with a complex textured pattern. Using a thin roller, roll all the joints. It is important not to overdo it here, because the porous structure of the wallpaper can be damaged and a dent will remain in this place. About methods and options Best selection