How to adjust plastic doors yourself. Tips on how to adjust a plastic door for the winter yourself

6616 10/06/2019 6 min.

Many people choose plastic entrance doors for their home. Usually this option used for a balcony, however, an entrance door made of durable metal-plastic is quite appropriate at the entrance to an office, a private house. Unlike wooden doors, plastic is more practical: it does not dry out and is not afraid of bad weather. And, at the same time, it is lightweight, which distinguishes this design from its metal counterparts. Plastic doors are usually installed by employees of the supplier company, but every owner can adjust it, “tailor” it to his needs, if he is even a little familiar with the simplest tools. In this article we will tell you how to correctly adjust a plastic entrance door: we will find out what is needed for this and give detailed instructions– with an explanation of all stages of work.

Important points when adjusting a plastic entrance door

Purchase and installation of a new plastic door group- an activity that requires certain skills and knowledge. If you don’t yet know how to install correctly, here are a few recommendations that will allow you to check quality installation doors without defects or flaws.

Step-by-step installation instructions interior doors with your own hands offered.

Most often, adjustment is required immediately after installing a new door. Even if the installation was carried out by super-professionals, it is still necessary to subsequently “adjust” the installed structure and bring it “to mind.” If it is located in a walk-through place, for example in an office, a store, then the question often arises. In such institutions, the door is constantly opened and closed: and not always delicately and carefully.

If after installation the structure opens “with a creak”, this is a good reason to contact the company that installed the door with a complaint and demand that the shortcomings be eliminated.

Read all the information about plastic entrance doors with glass.

The extent to which the door is installed correctly and vertically can be checked using a level - laser or regular. This tool will demonstrate any deviation from the norm.

check whether the frame fits tightly to the door frame. There should be no cracks, defects or gaps. To do this, you need to familiarize yourself in advance with;
open the installed door structure halfway: it is important that the leaf does not try to close or open completely on its own, but remains in the same position as you left it;
If you have absolutely no idea about installing doors and the specifics of metal-plastic door structures, before the arrival of the installers, it will not be superfluous to watch a special video that will give initial knowledge in this matter. After watching the video and reading the corresponding article on the Internet, you will be able to talk with masters with a certain “knowledge of the matter,” which will help you avoid many possible “jambs.”

Read also about the advisability of installing plastic entrance doors for a private home.

The need to independently adjust the lock

You will be able to notice without any measurements that the time has come for adjustment when you feel that there is a draft in the room when closed door. This means that in door design cracks have appeared that require immediate elimination. But we will still find out in what exact cases the need to adjust the plastic entrance door arises, what points indicate this need.

Sometimes it's enough to circle door frame pencil to see that the resulting lines are not at all parallel. And if so, it means that there is an urgent need for adjustment and correction.

To see how tightly the door fits, place a piece of paper between the frame and the frame and press it down. After pressing, try to pull out the sheet: if it comes out with difficulty, then everything is in order with the density. But if it pops out easily and effortlessly, you need to adjust the pressure.

Sometimes deformation and temperature changes cause the door leaf to move. And then the door leaf begins to touch the middle of the frame. Or such deformation leads to the door “sliding” down, and its lower edge begins to touch the canopy when moving.

Adjustment of the installed door handle is often required. The need for this arises when the handle begins to wobble, and even more so when it completely falls out of its own socket.

After installing the door structure, you may need to install a locking device; we recommend reading about overhead door bolts.

Sometimes it is necessary to make a frontal adjustment - to the clamp, if, as a result of wear of the seal, the door leaf does not fit tightly to the frame.

In addition to the above, adjustment is needed when open lock The sash does not stay in the closed position.

If you find one or more of the listed “errors,” then it’s time to make an adjustment. However, attention: do not make any independent moves if the warranty period from the installer manufacturer has not yet expired. During the warranty period, the company is obliged to eliminate all technical defects (arising through no fault of the owner) free of charge. And your intervention and attempt at repair (possibly unsuccessful) will become grounds for the company to refuse warranty obligations.

How to install a plastic window in wooden house is told.

Tools

In order to efficiently and professionally carry out work on adjusting the front door made of plastic, you will need the following set of tools:

screwdrivers: flat and Phillips;
hex keys of all sizes;
roulette;
special plastic gaskets;
pliers.

And if you are doing similar works for the first time, it would be a good idea to open a website with our educational article, which will help you adjust the plastic entrance structure step by step.

Vertical adjustment

Each metal-plastic door is equipped with a special adjusting screw on the hinge. If this screw is “loose”, on the lower or upper layers minor dents will be noticeable in the existing seal, or the door leaf will rub the threshold. To correct this defect, you need to find a screw in the loop of the indicated screw that adjusts the height of the door, and then remove the plug from it.

To adjust the screw, use a 5mm hex key. By rotating it clockwise, you will raise the door frame, and counterclockwise, you will lower it to the required height.

Horizontal adjustment

This type of work is most often necessary when the plastic sheet begins to sag due to its heaviness.

To make the adjustment, open the door wide, unscrew the screws with a 3 mm hex key from the two upper hinges. Then close the door leaf and remove the covers from the screws. To adjust, we need the longest screw, located horizontally - it is adjusted in the upper and middle loops. Moreover, the top one should be tightened a little tighter. This is usually enough to eliminate the door misalignment.

Well, to ensure that the sash always moves evenly, you can adjust the remaining screws running horizontally in all three hinges.

Pressure adjustment

In another way, this type of work is called frontal tuning. You should know that the pressure should be adjusted periodically: every spring and autumn. During the warm season it is weakened, and during the cold season it is strengthened.

To adjust the required clamping density, find the locking pin, where there is a special notch with which the clamping density of the door is determined. Using a hexagon, this notch is turned towards the frame to loosen the pressure, and away from the frame to strengthen it.

But it happens that the serif is already rotated in the required way, but the density is still insufficient. In this case, you can adjust the frame with double-glazed windows.

You may be interested in information about.

To do this, you need to remove the glazing beads that hold the glass unit in place. Using blades, which are located between the double-glazed window and the plastic sheet, gaskets (also made of plastic) are installed. By choosing the right gasket, you can properly adjust the door misalignment. When you put the glazing beads in place, tap them with a rubber mallet to avoid deformation.

Sealant

When a door is used crooked for too long without proper adjustment, the seal will wear out and become deformed.

The deformed seal must be removed, then the groove must be cleaned of dirt and dried adhesive residues. Then coat the groove with fresh glue and install a new seal. Make sure that it is not too tight.

In addition, what kind of seal for plastic windows better, you will find out.

Handle adjustment

When using an entrance structure made of plastic, two problems may arise with the handles: looseness or, conversely, too clumsy and reluctant to turn.

If the handle is loose, you need to turn the cover on it 90 degrees, open access to the screws and use a screwdriver to tighten the screws, thereby eliminating the existing defect.

If the handle is tight, then the problem is the skew of the plastic door leaf. This defect will have to be eliminated using one of the methods discussed above. If all the distortions have been eliminated, but the handle is still tight and clumsy, the most optimal solution there will be a replacement.

What do experienced door installers advise us?

To avoid the need for adjustment often, equip the door with a special microlift and a closer-limiter. The microlift will not allow the door leaf to sag, as it will “take” its weight upon itself. And the limiter will not allow the hinges to come loose when the door rests against the jamb.

Regularly lubricate the existing seal with silicone, which will significantly extend the serviceability of the gasket.

Try to use the door handle for its intended purpose: no need to hang bags, umbrellas and other items on it. Improper use can lead to sagging and loosening of this part.

Do not forget that the lock also needs to be lubricated periodically. If you don’t do this, household members will begin to pull the handle hard: and this leads to the door leaf being skewed.

It is possible that you will have a need.

Video

On the video, adjusting the plastic entrance door:

We looked at the process of adjusting the plastic entrance door. The same principles can be used if a plastic door is installed between rooms. As you can see, there is nothing particularly difficult to do the job yourself. A specialist charges about 1,800 rubles for adjusting a plastic door: think for yourself what savings are possible if you do the work yourself. Keep an eye on the front door: the warmth and comfort in the house depends on its condition and performance.

I wish you good health.

Many of us sometimes hear voices several times a day. public transport the phrase “be careful, the doors are opening,” but few people pay attention to specific word- "carefully". Meanwhile, the main emphasis in the phrase is on this word.

Every person passing through doorway into some unfamiliar room, we have the right to assume that the door will unexpectedly show its character and really play the role of the element it should be - an element of the building envelope.

Sometimes, of course, the door does not allow you to enter the room, because it is simply closed. But there are times when the door leaf comes into conflict with the door frame, or, simply put, the door “sticks.” To correct this defect, in some cases it is even necessary to replace damaged doors, and in some cases it is enough to simply adjust them.

Today we’ll talk about how to adjust a plastic door.

Why adjust a PVC door

Some time ago, answering your questions, I talked about how to adjust the opening sashes in plastic windows. Apparently, you have completely figured out the windows, and now new questions have already begun to arrive about how misaligned plastic doors can be brought into working order.

Discussing the topic of adjusting doors made of PVC profiles will take a little longer than adjusting windows, because door hanging systems have a greater variety than window sash fastenings. In addition, the door structure is additionally equipped with complex locking fittings and a lock with a latch embedded in the profile.

Easy to adjust hinge and locking system plastic doors in the event that the warranty period specified by the manufacturer or installer of the door structure is still valid. Calling a repairman, complaining to him about a malfunction and waiting until he brings everything into perfect condition is not a difficult task at all.

We will look at another frequently encountered plot, in which two main characters actors– you and a misaligned PVC door.

Types of plastic doors

Attentive consumers, of course, noticed that All doors are divided into two types: entrance and interior.

But this is not the only difference between door designs.

Additionally, entrance door blocks are also divided according to the type of opening - automatic and mechanical.

Automatic entrance doors can be:

sliding single-leaf or double-leaf, with opening to the left, right, behind the wall or behind a fixed sash;
carousel, with three or four leaves with different types drive;
hinged with one or two doors.

Interior doors, in turn, are divided into solid and transparent (French windows). A special place among interior doors is occupied by doors installed on the way out from the room to the balcony or loggia.

This type of door structure differs from the others in that it is not installed on its own, but together with part of the window block, and one of its sides is fixed not in the doorway, but in the window frame.

Another significant difference between plastic balcony doors and other door structures is that their curtains are similar to those used to fasten window sashes.

Previously, all balcony doors (first wooden, and then plastic) were made according to the same pattern: the lower half was blank, the upper half was filled with glass.

Recently, when people increasingly began to use balconies and loggias not as storage rooms, but as a cozy, good repair a place to relax, then balcony doors began to be made like French windows, that is, fully glazed.

A door in which the entire panel is glazed with a high-quality double-glazed unit weighs no less than its metal prototype, and is framed by a PVC profile. This means that such a design must have special reinforced fittings.

Immediately after installing the balcony door, it must meet the following requirements:

the canvas around the entire perimeter should be pressed tightly against the door frame;
in the half-open position, the door leaf must be in a static state, that is, it should not close or open arbitrarily;
the canvas should not sag or cling with the profile or fittings to the strikers installed on the box;
the locking handle should move around its axis freely, without visible resistance.

If the installers did a great job and did everything according to established rules, then going out onto the balcony will not soon cause you certain difficulties, the cause of which may be a skewed door leaf.

But if the slightest signs of malfunction appear in the operation of the balcony door, then the “disease” should not be started, since its consequences will only get worse.

You should promptly seek help from a specialist or correct the defect yourself.

Technology for adjusting a plastic door in the video:

Adjusting balcony door hardware

If you carefully read my articles, then you have already come across recommendations for adjusting window sashes. The principle of their adjustment does not differ from the same process in relation to the door to the balcony, since the fastening fittings in both cases are absolutely the same.

There is only one small addition to the design of the balcony door. It is a hook at the end of the door leaf on the side where the load-bearing curtains are attached. The technical purpose of this element is to help the rather long side profile, when the sash is closed, not to bend, but to press its entire plane tightly against the frame.

This hook, like all other points locking mechanism, consists of a striker fixed to the frame and a movable pin installed at the ends of the sash.

Adjustment of the clamping force on the additional hook is carried out in the same way as at other points: by rotating the trunnion around its axis using a hexagon or a special spanner (the choice of tool depends on design feature the trunnion itself).

In order to adjust the position of the sash, you need to remove the plastic plug from the lower pin curtain, use a hex key inserted into the cylinder fixed to the sash, and turn the adjusting screw. Turning clockwise will raise the door leaf. If you turn the hex counterclockwise, the sash will lower.

You can move the bottom of the sash left or right by turning the hexagonal adjustment located in the lower part of the curtain attached to the door frame.

To change the position of the upper part of the sash from left to right, you need to tighten the fittings that are part of the fastening of the frame to the upper curtain. The adjustment point is located in the horizontal plane of the upper end of the sash, next to the upper curtain.

Pay attention to one detail: the adjusting screw, responsible for the movement of the bottom of the sash to the right and left, has access from two sides. If the slope does not fit close to the curtain in which the adjustment is located, then the hexagon can be inserted into the screw on the side of the slope and try to lift the door when it is in the closed position.

I strongly recommend not to do this, because the door may be pressed too tightly against the frame, and if you turn the screw using excessive force, you can easily break the thread on it, which will lead to complete failure of the lower support curtain.

How to detect defects

Fans of various kinds of test events when checking the carried out construction work There is one trick that is aimed at checking the quality of the door frame rebate to the door leaf in a PVC profile structure. It consists in the fact that when the sash is slightly open, you need to put a piece of paper under it on the frame, and then close the sash tightly, moving the locking handle to the “closed” position.

A similar operation should be carried out by applying the sheet along the entire contour of the clamp.

If the force with which the leaf is pulled out in different places turns out to be different, it means that the door begins to slowly lose its position as a well-adjusted product. Therefore, you need to prepare for the fact that you will soon have to carry out a number of measures to return it to a properly working state.

Another way to detect pre-emergency operation of a door leaf is to draw a line around the perimeter of the leaf with a simple pencil when the door is closed. If, after opening the door, you see that the pattern does not geometrically exactly match the doorway, then this will also indicate that there are some deviations in the adjustment.

A similar operation should be carried out even when the door has already begun to touch the frame. The drawing will show how much the door has changed its standard position, and in which direction the adjusting screws should be turned to return it to its original position.

What tools are used to adjust plastic doors?

Before you begin adjusting the mechanism that holds and presses the door leaf to the door frame, you need to prepare a simple set of construction tools:

screwdrivers (a pair of different sizes) of two types - Phillips and flat;
set of hexagons.

The kit for these items requires knowledge, which I will now share with you.

I urge you: do not proceed with adjusting the door leaf without reading and viewing the necessary information.

The trial and error method is not suitable in this case, because, as a rule, it leads to breakage of the fittings. Replacing a damaged element is not a quick and difficult task, because only a complete analogue of the broken part can be suitable for this replacement.

How to adjust a PVC door

PVC profile doors are an indispensable attribute of most public and commercial establishments. In many country houses their owners use plastic glazed doors to fence off hallways and exits from the premises to the terrace or winter garden.

In private houses, there is usually no increased load on plastic entrance doors (unless a small child sometimes rides on them, holding the door handles).

But in those places where crowds of people are constantly moving, and even some of them, leaving the room, dissatisfiedly slam the door, any door structures installed on this busy path have a very hard time.

Exactly because of this reason Plastic entrance doors are structurally different from PVC interior and balcony doors. They are more durable and have better heat and sound insulation.

PVC entrance doors serve not only as the building envelope, designed to provide entry and exit from the premises.

Their additional purpose is to prevent the spread of fire.

To do this, the surface of the plastic is covered with a special non-flammable polyvinyl chloride film., providing an increased fire safety class.

Of course, a film that provides protection in case of fire is very good, but it is even better if during the same fire the door leaf does not jam, it does not sag and allows everyone to quickly and unhinderedly leave the room. And this is only possible if the door curtains and locking mechanism are correctly adjusted and operating normally.

For the process of adjusting the pressure of the Alutex overhead hinges, watch the video:

Adjusting overhead curtains

The required number of door curtains connecting the frame to the leaf is calculated for each design individually and depends mainly on the weight of the door leaf.

If the sash design does not have a double-glazed window, and its leaf is covered only with a light sandwich panel, then two curtains are sufficient to secure such a sash.

But, usually, on a plastic entrance door that has glazing, there can be from three to four curtains, each of which has three types of adjustment.

It is important to know that if you try to change the position of the door leaf by tightening the adjustments of only one curtain, this can cause a point curvature of the profile (that is, it will bend only in the area where the adjustable curtain is attached).

It is precisely this kind of illiterate adjustment that subsequently causes squeaks that appear at the place where the curtains are attached.

Some “experts” advise that if squeaks occur, lubricate the hinges by pouring machine oil into them. Yes, maybe for a while the lubricant will be able to reduce extraneous noise when opening the door, but over time they will still appear again.

I can responsibly declare that a properly adjusted door without any lubrication should not make any sounds when slamming, except, perhaps, a soft slap.

For an algorithm for adjusting the top hinge of a plastic balcony door, watch the video:

How to raise a door leaf

I want to make a reservation right away - there are several constructively different models door curtains. How to regulate each specific model must be considered separately, using an individual approach. I’ll be honest: I used to come across such samples that, even with some experience, it was not immediately possible to guess which of the adjusting screws was installed in which place.

But now recent years five, as there are no new samples - apparently, the designers who are creating more and more new parts for attaching the sash to the frame have run out of imagination, or have they finally found best option door curtain designs.

Below we will look at how to adjust the most common type of door curtain.

If there is a need to change the position of the door leaf by lifting it a few millimeters up, you need to perform the following steps:

find the place where the adjusting screws are installed on all curtains. As a rule, this place is located at the lower end of the cylindrical part of the curtain;
select a wrench of the required size from a set of hexagons;
move the sash from the “closed” position to the “half-open” position;
insert the key into the upper curtain and turn it half a turn or a full turn as necessary;
exactly the same radius of rotation to which the hexagon was turned when adjusting the first curtain, it is necessary to turn the adjusting screws of the remaining curtains;
check the quality of the adjustment by closing the door;
If the defect has not disappeared and the door needs to be further raised, then all adjustment steps must be repeated sequentially.

If the door leaf is heavy, you can lighten the load on the first adjusting screw, which, in fact, transfers the weight of the entire lifted sash.

To do this, you can build a kind of lever under the sash and, by lightly pressing on it, help the adjusting screw lift the heavy sash.

You can also gradually lift the sash by making small movements with a hexagon, adjusting each curtain in turn.

How to press a plastic door leaf to a door frame

Unlike a balcony door, where the pressure to the frame occurs due to the rotation of eccentrics installed at the ends of the frame, the entrance plastic door has a different adjustment principle.

The difference between both methods of closing is that in the front door the door leaf is fixed due to a latch located in the body of the lock or separately installed at the end of the door. Whereas in the balcony door, the clamping mechanism is fixed and adjusted by turning the locking handle, which pushes the trunnions located at the ends of the sash into the hook with the counter strips installed on the frame.

Let me remind you that we are considering one of several, the most common design options for a door curtain.

Adjustment of the pressure of the plastic entrance door leaf from the side where the curtains are installed should be carried out according to the following scheme:

remove decorative plugs from the upper cylindrical part of all curtains. Please note: sometimes the manufacturer provides a hint on the plug itself - in which direction the screw should be turned in order for the sash to move closer or further away from the box;
select the required hex key diameter;
insert it from above into the lower or upper (there is no fundamental difference) adjusting screw;
gradually, little by little (no more than 10 0) by tightening the key, achieve the desired pressure. You can check the strength of the prim using a piece of paper (see above).

Many “homemade” people, not understanding the principle of operation of this adjustment, begin to turn the hexagon like the steering wheel of a ship, hoping to find the ideal point by trial and error. Sometimes this leads to the fact that it will be difficult even for a real specialist to correct the screw-up and return the door to the right direction of operation.

Therefore, before adjusting this unit, you should first become familiar with its structure.

An adjusting screw protruding upward is fixed to the lower curtain oval shape, onto which, when connecting the canvas to the frame, a part of the curtain attached to the sash is put on.

In the upper cylindrical part of each curtain there is an oval-shaped hole into which an adjusting screw fits. Their connection is a regular eccentric, which, when turned by 90 0, changes the position of the sash clamp.

Having adjusted the pressure on that side of the door leaf on which the curtains are located, you should begin adjusting the leaf on the side of the door handle.

Plastic entrance doors can be equipped with a regular latch or a latch built into the lock. The latch striker mounted on the frame is usually equipped with a sliding insert.

To increase the pressure on the door leaf, unscrew the two screws securing the sliding insert and move it closer to the seal installed on the frame.

Having firmly fixed the insert in the new place, you should check the quality of the connection between the sash and the frame by conducting a test using a paper sheet (see above).

Various options for adjusting the doors to the balcony in the video:

How to change the tilt of a door leaf

Adjusting the tilt of the door leaf relative to the plane of the door frame in different versions curtains are carried out using various methods.

Let me remind you that we are considering the most popular design option for door curtains. In this case, the most difficult part is removing the curtain cover located on the door leaf - it is under it that the adjusting screw is located.

To gain access to the screw, open the flap completely and locate the locking bolt in the inside of the curtain that holds the curtain cover in place. Having selected a hexagon of the required diameter, you should completely unscrew the stopper and remove the cover, sliding it along the slide towards the door handle.

After the cover is removed, you will immediately see the adjusting screw, by tightening which you will visually notice how the canvas changes its position relative to the frame.

I remind you again that Under no circumstances should you turn only one screw several turns at once.. This may cause the threads on the screw to become stripped.

The sash should be tilted by gradually tightening each screw required quantity rpm

What can you do to make plastic doors less likely to require adjustment?

The long-term operation of the fittings holding a plastic door depends, first of all, on the measurer who did everything required dimensions and calculated the geometric parameters of the new door.

If a mistake was made at this stage, and the tolerance between the doorway and finished product exceeded permissible norm 10-20mm, then the installers, of course, will install the door, but its attachment to the wall will not be strong enough.

This defect cannot be corrected by installing an additional number of anchors, since the anchor simply fixes the position of the door frame, and the mounting foam, which plays the role of the main seal, loses this quality at a rate directly proportional to the increase in the thickness of the layer between the opening and the door frame.

Therefore, if the door is more than a couple of centimeters smaller than the opening, when the door leaf slams, the dynamic load will each time be transferred to the frame, which, due to its unstable position, will loosen the fittings.

The next reason for premature failure door hardware can create constructors that calculate the number of curtains for a specific sample.

According to the technology, the number of curtains depends on the weight of the door leaf. If there is an error in the calculations, for example, after installation three points fastenings instead of the required four, and when the door is operating under conditions of increased load, for example, at the entrance to a store, you should expect a quick failure of not only the adjustment, but also the fastening of the curtains themselves.

Another reason for frequent door leaf adjustments may be the intensive work of the door structure. In this case, it is possible and even necessary to equip the door leaf with a closer.

These parts protruding above the door, of course, do not add additional aesthetic appeal to the door structure, but the fact that they are very convenient and allow you to prolong the trouble-free operation of the door is beyond doubt.

Quite often, we ourselves are the cause of a loose door system. For example, when in a double-leaf swing door we forget to close one of the latches that secure the non-functional part of the door leaf from below and from above.

Features of plastic entrance doors

To produce a PVC entrance door, a particularly strong profile and special steel reinforcement are used. Therefore, of the three types of plastic doors (balcony, interior and entrance), the latter is the heaviest, and for its normal functioning, reinforced fittings and special, more reliable types of door handles and special closers are used.

In order for the front door to serve as a reliable barrier to noise and cold, its design uses a double sealing circuit, which ensures that such a door unit performs all functional duties.

All entrance doors have one general feature– absence of the lower part of the protruding frame, such as, for example, a window block.

If this lower section remained at the door frame, it would protrude above the floor surface and would certainly interfere with passing people. Therefore, the lower threshold of the entrance door is made flat, not rising above the floor surface.

In order not to leave this section of the door structure unprotected from the passage of cold air and sound waves, some door leaves are equipped with magnetic thresholds.

This system is designed in such a way that two magnetic bars, recessed into the level with the threshold, are magnetized to a metal strip attached to the lower end of the door leaf when the door is closed. When the door is opened, the magnets fall inside the threshold without interfering with the passage.

It must be taken into account that this part, important for heat and sound insulation, can only work with precisely adjusted adjustment of the door leaf, when it is located exactly above the magnets and at the height necessary for their operation.

One of the main functions of the front door (no matter whether it is made of plastic or other material) is good protection premises from unwanted entry. Reliable performance of this function implies the use of a door lock in the design.

Excellent burglary resistance of a plastic entrance door is achieved by fastening load-bearing elements, locking devices in steel profile reinforcement.

Existing locks for installation in plastic doors are divided into:

single-lock, which have one locking point located approximately in the middle of the height of the door structure;
multi-point, they are used for two- or three-point contact of the shutter locking mechanism with the door frame. Several points of contact along the entire height of the frame provide increased reliability and high-quality pressing of the sash to the frame.

Even a minor change in the position of the leaf may not allow the multi-locking mechanism to perform its functions, which is why it is so important that all load-bearing fittings installed on the door structure are in working, adjusted condition.

The door closer is a mandatory element of the fittings

Strong impacts of the door leaf on the frame and sharp tugs on the door handle seriously affect the operation of the door structure and have a significant impact on reducing the frequency of adjustments to door hardware.

Installing a door closer will help to avoid the premature onset of the consequences of too active operation of a plastic entrance door.

Smoothly closing the door leaf and not allowing the door to be pulled too sharply is the main function of this mechanical device. In addition to combating premature wear of fittings, one of the functions of the closer is to maintain the microclimate in the room.

The smoothness of the force of pressing the sash against the frame is adjusted both immediately when installing the device, and periodically during its operation.

The frequency of maintenance depends on the time of year - when cold weather sets in, the oil in the closer becomes more viscous, and the performance will deteriorate significantly if it is not adjusted in time.

IN technical specifications Each closer model must indicate a lower temperature threshold at which the device is subject to additional adjustment.

If there is no need for non-scheduled repairs, then The frequency of adjusting the plastic door is once a year., whereas installed on this door The closer should be adjusted at least twice a year. The frequency of adjustment also depends on the weight of the door leaf and how often it is used.

Additional functions appear on those closers that are equipped with additional internal valves. Such devices can fix the door at a certain point when it is in the open position, and can also “slam” the door to the frame for better abutment or operation of the latch.

There are universal models of door closers that can be installed both on the side of the door into which the leaf opens and on the opposite part. It is not advisable to install the device on the street side, because there it will be most exposed to temperature changes that negatively affect it.

For information about the capabilities of a door closer for a plastic door, watch the video:

Adjusting the closer

Before setting up the door closer, you should check whether the fittings of the door structure itself need adjustment. To do this, you need to disconnect the device lever from the sash and check for sagging or damage to the curtains.

The standard closer mechanism has two valves that can be adjusted.

The first is responsible for changing the speed of self-closing of the door leaf. To increase or decrease the speed, turn the screw installed on the side end of the device. If you turn it counterclockwise, the closing speed of the sash increases; if you turn it counterclockwise, it decreases.

The adjusting screw should be turned extremely carefully and no more than one or two turns, otherwise the seal of the housing may be compromised, which will lead to leakage of the oil filler.

The second adjusting screw is installed in the valve, which is responsible for the movement of the flap just before the moment of slamming.

This valve should be adjusted when the leaf is perpendicular to the door frame. Turning the screw clockwise increases the amount of time until the door leaf is quickly adjusted to the frame.

In the joint of the lever mechanism there is a special nut, which, when turned clockwise, increases the opening angle of the door leaf.

If it becomes necessary to leave the doorway open, then there is no need to place the sash under the corner various items, fixing its position - such actions inevitably lead to damage to the door hardware.

Some door closers are equipped with a special function that locks the open sash in the desired position. To do this, you just need to tighten the locking element installed on the device itself.

The sash locking function can be configured to operate in automatic mode. Then, when opening to the point set in the closer’s settings, the door will close according to all the rules, and after passing the mark, the door will automatically lock in the desired position.

It is important to keep in mind that when installing a door closer on a plastic door, you should turn the fastening screws not only through PVC coating, but also through the steel profile installed underneath, reinforcing the entire structure. Only in this case will the closer be securely fastened and withstand all loads during operation.

In order for the device to last as long as possible, you should not help it by applying force when closing the door. If not special device, fixing the open position of the sash, the lever mechanism should be disconnected in cases where it is necessary to long time leave the door open.

The partially limiting function of the closer can be duplicated by installing a conventional bumper on the floor.

But you should know that this operation also occurs subject to certain conditions.

The bumper should be installed in such a way that the place of its contact with the door leaf is closer to the outer edge of the opening leaf. If the bumper is installed close to the door curtains, then the load on them will be higher than permissible, because in this case the principle of a lever will begin to operate, breaking the curtains out of the fastenings.

When to adjust fittings

You should turn to specialists for help or try to adjust the door fittings yourself (in accordance with the recommendations of the same specialists) when:

became visually noticeable, or a strong draft appeared in the junction- this indicates that the leaf does not fit tightly to the door frame. You can verify the correctness of your suspicions using a sheet of paper, which should be placed one by one along the entire contour of the junction and taken out with the door closed, determining in different places the difference in the pressure of the connection between the sash and the frame;
the sash appeared to sag. The first symptoms of this malfunction: when opening or closing, the door clings to the frame, the door latch does not fit into the lock striker, or the lock itself does not close well;
The functioning of the door closer has changed. In this case it is not necessary that this problem occurred due to the door fittings; perhaps the misadjusted closer itself was to blame. But it is imperative to find out the real reason.

Once a year, even with trouble-free operation of the door leaf, test measures should be carried out for preventive purposes in order to prevent the occurrence of serious malfunctions in the operation of the door structure.

Tips for adjusting the balcony door in the video:

Before installing a plastic door, you must not only choose the manufacturer carefully, but also pay attention to its components. Only in these cases will the door serve you for decades. But some time after installation, the door mechanisms may fail. To eliminate this malfunction, it is not at all necessary to contact the specialists. You can adjust the mechanisms yourself. To do this, you need to know how to adjust it yourself.

The most common causes of breakdowns

As a rule, all malfunctions of plastic doors arise as a result of a violation of the position of the leaf itself. Due to its frequent use, all moving mechanisms gradually fail. Therefore, before adjusting the plastic door, let's first figure out in what cases it is necessary to do this.

The bottom of the door rubs against the threshold. As a rule, this happens due to the mechanisms not being clamped tightly enough. This is not explained by the quality of the door itself, but by the carelessness of the technician who installed it. In addition, the door leaf can sag under its own weight. This is mainly due to weighted
The middle part of the door (near the handle) rubs against the plastic door. This usually occurs as a result of sudden changes in temperature.
The door does not close tightly. The cause of such a malfunction can be not only the same sudden changes in temperature, but also the displacement of the pressure roller after using the doors for a long time.

Prevention of problems with plastic doors

Many people probably think that, knowing how to adjust a plastic door, it is not at all necessary to treat it with care. But, unfortunately, this is not the case. The door can be adjusted several times. But after a while there will come a time when this procedure simply won’t help. Thus, you should always remember that the prevention of doors should also be taken seriously, as well as their selection or installation.

So, before purchasing this or that door model, never refuse its configuration, even if this increases the cost of your purchase. Otherwise, before you adjust the hinges of plastic doors yourself, you will again need to spend time and money finding one or another component.

Necessary accessories for plastic doors

Most important tools For adjusting plastic doors, the following are considered to be:

Microlift. This device will help troubleshoot doors of any size and weight. It helps prevent even the heaviest door panels from sagging. The microlift takes on part of the door's load, but only in its closed position. It may look different. Its most common types are a roller at the bottom or a movable plate at the top of the blade.
Door opening limiter. This mechanism not only helps prevent the door from sagging, but also sets the maximum angle of its opening in such a way that it protects the door from impacts on the slopes.

In addition, before you choose a particular plastic door manufacturer, find out more information about it. The fact is that many companies neglect the quality of the fittings themselves and install cheaper ones, which may also be one of the reasons for the minimum service life of the product.

Elimination of sagging door leaf

We have already found out what the sagging of the leaf depends on, now let's look at how to properly adjust a plastic door with your own hands in this situation.

If you notice that the canvas is clinging to the threshold, you need to fix this problem as quickly as possible. To do this, open the doors and look for a small screw on the top hinge. As a rule, it is a hexagon. In some cases, it may look like an asterisk. In one case or another, you will need to select a key for the screw.

So, turn the screw clockwise. Make two or three turns. Close the door. It should now close freely.

If the canvas sag very much, and these actions did not help eliminate this malfunction, then experts give the following recommendation on how to adjust the plastic door in height. Locate the adjusting screw under the lower canopy protective cap and turn it clockwise a couple of times. These steps will help you solve your door sagging problem.

Elimination of rubbing of the door leaf on the side

Rubbing on the side of the door is also easy to prevent. How to adjust the plastic door in this case? To do this, find another screw on the lower canopy, which is located not at the bottom, but at the side, that is, with inside canvases. Again, by twisting it clockwise, you can put the door leaf in the right place. It will no longer cling to the jamb and will be able to close easily.

If this technique does not help eliminate the rubbing of the door on the side, find the upper canopy, which was described above, and perform all the same steps.

Improving door sealing

If you notice that your door does not close tightly, then this troubleshooting item is for you. Let's figure out how to adjust the pressure of a plastic door.

To begin, remove the ends of the door. There are special eccentrics there. By rotating them you can set the correct door mode. The only difficulty here is finding the right eccentrics. Usually they are installed in threes at the top, side and bottom. They should all be gradually turned at the same angle so that the door closes tightly. But since this fit will only be near the handle, it will also be necessary to adjust the canopies with special screws.

Door handle adjustment

We have already looked at how to adjust a plastic door. But what to do if its handle does not function properly when opening? Don’t worry, you can also fix such problems with the handle yourself.

To do this, move the decorative plate 90 degrees. Underneath you will find the handle mechanism and mounting screws. Tighten these screws and the handle on the door leaf will be fixed more firmly. Thus, you will be able to regulate its tightness yourself, which makes it possible to troubleshoot the door lock opening mechanism.

Replacing handles on plastic doors

Now you know how to adjust a plastic door with your own hands. But replacing its handle will cause more difficulties. After all, such fittings are the most vulnerable. It is also worth noting that its service life is much shorter than indicated by the manufacturer.

The main reason why plastic door handles break is the poor quality of the material. Its constant use will lead to cracks, and in the future - to the fact that the handle breaks off completely.

If you are faced with the latter problem, first you need to select an analogue of your pen. You need to choose this or that fitting carefully, paying attention to Special attention on the identity of the dimensions of the part itself and fasteners. As a rule, all these devices are practically the same, but in this case it would be useful to play it safe.

The handle is attached directly to the metal hidden under plastic profile base with self-tapping screws, which are subsequently closed with decorative plugs.

We hope our tips helped. Now you know how to adjust the plastic entrance door yourself.

Do-it-yourself adjustment of balcony and interior plastic doors is a set of actions aimed at eliminating problems that arose when handling PVC (polyvinyl chloride) structures.

Regardless of how expensive the plastic structure is installed in the room, and no matter how high-quality the fittings are, sooner or later a situation may arise in which it is required. This can happen as soon as the next day after installation plastic construction, and 10 years after that.

In a situation where the owner of the premises in which it is installed, or another person does not want to seek help from specialists in this industry. He has the ability to independently adjust the plastic doors. When handling the door structure, he must be aware of the following issues:

in what places of the door mechanism are the units intended for adjusting the plastic door located;
problems that may arise when handling a plastic door and ways to resolve them;
adjusting GreenteQ door hinges.

Elements of adjustment of a plastic door, common operating problems and methods for eliminating them

We bring to your attention a training video:

Adjusting plastic doors with your own hands - eliminating common problems

Do-it-yourself adjustment of plastic doors

Greetings to all blog readers! Today we will talk about adjustment PVC doors on the balcony.

A lot of my friends complain that there is a draft through the door, it doesn’t close tightly, and a bunch of other problems. I have to go and figure out what happened there.

In fact, there is only one reason - improper care for fittings and sealing rubber bands. Every time we have to explain what needs to be done, how to care for the door. In this regard, I decided to write instructions for everyone, in case you have the same problem and cannot find a solution.

Today, almost every apartment has metal-plastic balcony blocks. As you know, both windows and doors can wear out over time. Most often, it is plastic doors that require repairs, because in just one day they can be opened and slammed countless times.

At the same time, the door weighs more than the window frame, therefore it is easier to deform, and sometimes it “slips” when the structure is lowered. There is a need for urgent repair of the sash.

To adjust a faulty balcony door, generally apply the same principle as in setting up window mechanism. However, door repair has a number of characteristic properties. We will talk about problems that may arise during the operation of plastic doors and ways to solve them in this article.

First of all, when starting to adjust the door, you need to stock up on screwdrivers (regular flat-head and Phillips), as well as a 4 mm wrench for adjusting the screws on the door hinges, and pliers.

Sometimes it happens that the plastic door to the balcony does not close. This problem usually occurs due to sagging door hinges or broken hardware, in particular the lock. Often the sash itself becomes deformed. In this case, you need to find out the cause of the malfunction, and only then begin repairs.

If the door with its lower structural element, when trying to close it, clings to the threshold, and it must be lifted, holding on to the fittings, it means that the door has dropped under the weight of its own weight. Due to the impressive size of balcony doors, such misalignment often occurs. If the door touches the frame in the center, we can talk about a horizontal displacement of the sash or a change in its shape.

This sometimes happens when exposed to high temperatures. Sometimes the mechanism that presses the sash to the frame breaks. As a result, the door frame remains slightly closed and does not lock even when the handle is turned. This problem can be resolved by repairing the clamping mechanism.

Adjusting the balcony door fastening mechanism

If the structure sags, the upper door hinges are adjusted first.

It is necessary to open the sash completely, set the product to the rotation position, then release fastener from a decorative hat (mostly on all metal-plastic doors the hinges are covered with special caps, and it is under them that the screws are hidden).

After this, using spanner wrench, tighten the adjusting screw to the right several times. This will correct the crooked position of the structure and prevent it from sagging again. It happens that in order for the sash to rise, it is also necessary to tighten the hinges from below. They have top and side screws.

The door can be raised a few millimeters by adjusting the top end screw. If you turn the side screw with a key, the sash tightens or, on the contrary, moves away from the opening.

Thus, the sagging is eliminated by rotating the adjusting screws on the hinges in the bottom and upper parts door leaf. They are designed to allow the sash to be slightly moved in one direction or another.

What to do if the canvas touches the frame when opening

In this case, the door with its upper border can touch the frame. This indicates that, when adjusting the sagging, the sash was shifted to a greater height than necessary. It is easy to fix this problem: just turn the end screw once in the lower hinge. Sometimes the door cannot be closed completely, and the resulting gap allows cold air to pass through.

To avoid drafts, the sealing material should be changed. To do this, we purchase a suitable sealant at the construction market or in a store.

Using a screwdriver, release the groove from the old profile, then clean it of dried glue and wash it with a damp sponge or cloth.

Then you need to let the groove dry, then apply a layer of glue and attach the new profile with the fastening side. In this case, the cord or insulation material must not be pulled. It must be carefully smoothed out with your hands or a special copper tube with a curved end. The ends of the profile must be firmly glued.

So that balcony owners do not have to frequently change the sealing cord in the future, it is recommended to treat it with a special silicone mixture. You can usually purchase silicone for lubrication from the supplier of the balcony block system.

The handle for the plastic balcony door deserves special attention.

Deformation of locks and fittings is a fairly common problem. Sometimes, the door handle does not make a full rotation and requires force to do so.

Such a malfunction can be eliminated by using horizontal door adjustment. In this case, you can specifically press the door leaf more tightly in the direction opposite to the hinges before the start of the cold season. This is fine.

However, in the spring it is better to reduce the force of the pressing sash mechanism, since this causes it to break faster and also wears out the sealing profile. In situations where the handle is severely damaged, it is better to replace the deformed structural element with a new one.

If the handle is loose and turns too easily, you need to rotate the bar at the base 90 degrees. There are screws underneath that need to be tightened. This simple procedure will quickly solve the problem.

In order to check whether the balcony door has been adjusted correctly, let’s try to close the sash. If this happens easily, with light pressure on the handle, then the adjustment has been completed correctly.

Lock breakdowns

The door frame locking mechanism keeps the door closed. With frequent use, it breaks down and requires replacement.

The lock is screwed to the end of the product with screws. You just need to unscrew them, pull out the old balcony latch for plastic doors and screw in a new one.

Elimination of microdefects, scratches and chips

Over time, small cracks and damage may appear on the surface of the balcony door. To get rid of them, use a special mixture called “Cosmofen” or any other component similar in composition. It should be applied to visible areas with defects and wait until the surface dries.

After this, a special substance – plastic in liquid form – is also applied to the chips. Suitable for doors with lamination wax pencil or the so-called furniture touch. Sometimes, repairing a balcony opening can only be done by contacting a specialist.

This applies to such defects as the appearance of cracks and chips in the glass unit, holes in the plastic, and destruction of welds. This may cause the door hinge mechanism to break. In some cases, it is even necessary to order the production of a new door or call a repairman.

Occasionally, when adjusting the overlap, it becomes necessary to move the glass unit. Using the adjusting screws you can move the door a few millimeters. If you need a larger offset angle, you need to combine both types of adjustment - screws and moving the glass unit.

The glass unit is secured with rods. They should be removed, and then squeezing blades should be placed under the glass unit, which will act as a lever, and with their help, move the glass unit in the desired direction. In this case, the spring effect begins to act and the plastic door moves along with the double-glazed window.

After adjustment, you need to secure the glass unit again with rods. These fasteners are different sizes for different parts of the structure, so you need to be careful not to mix them.

Balcony door fixing

In some cases, it becomes necessary to completely remove the sash. For example, to implement it complex repairs or when it is necessary to leave the opening open when exiting to the balcony in order to remove large pieces of furniture there.

First, remove the special cap covering the top loop. Then the axial rod (pin) is pressed. The pressure should be on its head, which rises above door hinge. Using pliers, you need to hold the pin from below and also pull it out to the end.

The next step is to tilt the structure towards you and lift it slightly, 5–6 cm is enough. This procedure removes the fasteners from the bottom hinge, which allows you to remove the door and move it if necessary.

After some time, the sash needs to be put back in its place in the opening. The installation of plastic doors on a balcony is carried out in several stages: The lower hinge is placed on a rod for fastening with a special hole. The door is then installed in its working position.

With proper pressure on the top hinge pin, it will take its original position, protruding 5 mm from both sides of the hinge. Finally, the decorative hinge attachments should be put back in place.

Do not forget about the large weight of plastic balcony blocks.

The sash is quite heavy. If you drop it during dismantling, the hinge mechanism will break. In this case, you will either have to buy a new door, or seek help from professionals, experts in installing balcony blocks. In order to avoid such troubles, it is better to remove and hang the door by inviting an assistant.

Often the installation of a balcony metal-plastic system identical to the installation of any standard interior fabric or sashes. However, the opening method makes a significant difference here. This determines the specifics of the installation. It is carried out in stages.

First you need to remove the old ceiling. Next step is cleaning doorway. It is necessary to sweep away the remaining debris and wipe the sides of the hole in the wall from dust. Then you can proceed directly to installing the door frame.

Moreover, if sliding products are being installed, it is necessary to attach guide profiles. The remaining gaps are filled with polyurethane foam, after which the door is put on the hinges. At the end comes the turn of fittings and adjustment of the handle.

As a rule, when purchasing a balcony door, they issue a guarantee. While the warranty period has not expired, it is better to use the services of a specialist for installing plastic windows and doors. Some defects and malfunctions are difficult to eliminate on your own.

In addition, if you additionally damage the door during adjustment or repair, you will no longer be able to count on the warranty and free troubleshooting.

You can set up a balcony door if it begins to function poorly with your own hands. However, you need to approach this process wisely so as not to accidentally damage the structure. Therefore, the main thing in installing and adjusting plastic doors to the balcony is strict adherence to the technology, accuracy and attentiveness when taking measurements.

If you make a mistake somewhere during the installation process, the door may begin to sag, bend, and simply not work well. Sometimes when adjusting a balcony door, the locking mechanism is destroyed. In this case, you need to replace it with a new one.

Source: zonabalkona.ru/dveri/ne-zakryvaetsya-plastikovaya-dver.html

When adjustment of a plastic balcony door is required

The price of a plastic balcony door is quite high, but the purchase is expensive quality model does not save from frequent cases of mechanism breakdowns. It's all about its frequent use, which leads to a decrease in the tightness of the sash.

In addition, double glazing provides excellent sound insulation, and PVC guarantees durability. However, it is these materials that noticeably make the structure heavier, as a result of which it begins to sag under its own weight and ceases to close tightly. As a result, a noticeable draft appears in the room, and insulating the balcony does not help.

The normal position of the plastic door is as follows:

if the door is open, it does not move on its own;
no sash displacement;
the leaf is pressed tightly against the door frame profile.

If this is the case, intervention in the door mechanism is not required. However, if you notice the slightest deviation, you immediately need repairs to your plastic balcony doors. You shouldn’t delay calling a technician, because with each opening and closing the situation will get worse. As a result, this can lead to balcony doors not closing at all.

Helpful advice! If the door installation warranty has expired and you do not want to contact a specialist, you can watch a video of self-adjustment of plastic balcony doors and fix the problem yourself.

Types of balcony door faults

If you adjust a plastic balcony door with your own hands, for the success of the repair it is important to determine the causes of the malfunction. Most often the problems are as follows:

Type of malfunction	Cause of occurrence
Door sagging (when closing the door clings to the plastic threshold)	Most likely, the structure is too heavy, which leads to its displacement downwards
Hanging handle for balcony door	Usually the handle starts to dangle when the balcony door is opened very often
Plastic balcony doors do not close tightly (the leaf is not pressed tightly against the frame and you feel a draft)	As a rule, this is a symptom of a malfunctioning door handle or a misaligned door.
The door is shifted to the side (the door touches the middle of the frame)	Most often the problem is in the hinges; adjusting them will help eliminate the problem. This problem often occurs due to constant sudden temperature changes that affect the fittings for plastic balcony doors in case of insufficient insulation of the balcony

To test the door for tight closure, slam the shutter with a regular album sheet paper Try to push the sheet around the perimeter of the door. If it moves easily, the structure has lost its density and needs adjustment.

Also evaluate the tightness of the seal: uneven pressure on the rubber usually indicates sagging. Determining the direction of displacement is simple: pay attention to the place where the seal is compressed and check whether there is a mark from the sash on it.

How to determine if a door leaf is skewed

If you suspect the structure is skewed, close the sash, and then draw a pencil around the perimeter of the closed door.

Open the door and compare its outline with the drawn line. The presence of unevenness indicates that the door is warped. For accurate results, use a building level.

Table of values for door leaf adjustment

Let's say, as a result of measurements, you find out that the width of the drawn strip is 8 mm (an error of 1 mm is permissible). This means everything is in order and the door is not warped. If the width of one strip is 12 mm and the other is 4 mm, this clearly indicates that the door is skewed by 4 mm.

Note! Sometimes it turns out that on the hinge side the width of the strip is 3-4 mm, and on the handle side 6-7 mm. Such indicators indicate that the door is narrowed by 4-6 mm - this is a manufacturing defect, and there is no point in moving such a door.

Also check the width of the opening on all sides of the frame. The difference in measurements should not be more than 1 mm. Otherwise, the opening will have the shape of a barrel - this happens when installed incorrectly, when the middle of the frame is pulled towards the wall more than the top and bottom. Such errors also lead to loose clamping.

By measuring the width of the sash on all sides, you will determine the correct length of the impost. The difference between the three measurements should not be more than 0.5-1 mm.

If the indicators differ from the norm, the length of the impost differs from the required one and causes the door to skew.

How to adjust a plastic balcony door: step-by-step instructions

To avoid mistakes or accidental damage to the glass unit of a balcony door (the cost of which is quite high), you need to figure out how to adjust plastic balcony doors correctly.

When carrying out work, it is not necessary to overpay for a specialist: you can adjust the balcony door yourself - video instructions can be easily found on the Internet.

To work you will need very few tools:

hexagon;
crosshead screwdriver;
flat screwdriver.

Instructions and video: how to adjust plastic balcony doors when sagging

If you notice that when opening and closing the door it scratches the bottom edge of the frame, this indicates sagging of the door. The adjustment in this case can be vertical or horizontal.

Scheme of vertical and horizontal door adjustment

Horizontal adjustment steps:

Open the door wide to the swing position.
There is a screw located near the top hinge at the end of the sash. Take the hex key and turn it clockwise 2-3 times.
Remove the plugs covering the holes leading to the top screws.
Turn all screws under the plugs clockwise.
After adjusting the mechanism, check whether the door now closes freely. If necessary, tighten the screws again.

To understand how to adjust balcony doors vertically, do the following:

Lift the door evenly and find the screw at the bottom end of the hinge, located along its axis.
If the screw is covered by a plug, carefully remove it.
If you twist the screw clockwise, carefully lift the door, if counterclockwise, lower it.

Adjusting the pressure of balcony doors and door handles

To tighten the handle for a plastic balcony door, you need to do the following:

Slowly and carefully turn the plastic cap at a right angle.
Under the plastic cover, find the screws for fastening. Pull them up.

If the handle does not turn well, sometimes it is enough to lubricate the lock special material, which does not contain resin or acid. In the event of a complete breakdown, you should buy a handle for plastic balcony doors, unscrew the screws, remove the old part and put a new one in its place.

Helpful advice! A good option is to install a magnetic latch on the balcony door. This will allow you to avoid too much impact on the door handle every time you close and open the door, which will have a beneficial effect on its durability.

Schematic instructions for self-adjusting the position of the balcony door

If there is blowing from plastic balcony doors, this is a sure sign that the sash is not pressed tightly. It is necessary to adjust the pressure of the plastic balcony door. To figure out how to adjust plastic balcony doors for pressure, look for locking elements on the door leaf. They are responsible for the pressure density.

Using a wrench or pliers, rotate the locking elements until the door is in the desired position. Professionals recommend periodically self-adjustment plastic balcony doors depending on the season.

Just figure out how to adjust plastic balcony doors for the winter, and you can easily loosen the pressure in hot weather and tighten it in the cold season.

Sometimes adjusting the hinges does not help solve the problem, and then the leakage of the clamp can be eliminated using a pin. To do this you will need pliers.

To achieve maximum door pressure, install the trunnion perpendicular to the profile. To, on the contrary, achieve minimal pressure, position the trunnion parallel.

Replacing the seal and adjusting the door when the frame is scratched

It may turn out that adjusting the door pressure did not bring the desired result. This happens because the rubber seal has worn out, and any adjustments to the door are pointless without replacing it. To do this you need:

Pull out the old tires. This is done without special effort and you won't need any additional tools.
Remove dirt from the inside of the groove.
Place a new seal. Make sure that the side bend is at the end of the sash.

Helpful advice! To make work easier, remove the sash from the frame: this will allow access to the rubber gaskets from the hinge side. It is better to choose a seal from the same manufacturer as the installed doors.

If the balcony doors do not close well and touch the frame, scratching its center, follow these instructions for self-adjusting plastic balcony doors:

Lower the sash to the bottom hinge.
Insert the adjusting key into the side screw and tighten the sash.
If the door position does not return to normal, repeat the procedure with the top hinge.

Prevention of malfunctions of balcony doors

If you had to build a house yourself, adjusting the balcony door fittings has more value, because you want the result of your work to last longer. To minimize the risk of future problems, try to follow these rules:

reputable manufacturer - guarantee good quality products, because in terms of durability and performance characteristics the quality of the materials from which the door and fittings are made is of primary importance;
when purchasing fittings, make sure that all selected parts are suitable for the type and size of the balcony door: keep in mind that modern fittings are designed for a weight of 100-130 kg;
so that you don’t have to figure out how to tighten plastic balcony doors, make sure you have a special microlift: this compensator part prevents the door leaf from sagging under the influence of its own gravity;
To prevent the door from sagging and the sash from jamming, it is worth installing a special additional tire that limits the opening of the door.

Helpful advice! Microlift is especially relevant in case of double-glazed window, characterized by its impressive weight and size. The design of the microlift can be different, representing a small lever on the side of the sash or a roller at its bottom.

Also, even at the door installation stage, pay attention to the following points:

Along the entire perimeter of the door frame, the frame should fit evenly and tightly against it.
Opening and closing doors should be easy and effortless.
When checking building level It should be obvious that the structure is installed exactly vertically.
There should be no drafts.
If the door is installed level, in the half-closed position it should not open or close on its own.

Remember that adjusting the door yourself is possible, but requires attention, caution and careful diagnosis of problems.

Therefore, if you have a valid warranty on your balcony door, if you identify the slightest malfunction, you should contact specialists who will quickly determine the causes of the problems.

If you are sure that the malfunctions are due to manufacturing defects or installation problems, it is also better to turn to professionals - tightening the bolts yourself in this case will not correct the situation.

If you decide to adjust the door yourself, be sure to follow the instructions, and if you replace the fittings, choose products from the same company as your balcony doors.