Repair of bathrooms and toilets with PVC panels. Finishing a toilet with PVC panels: interesting ideas (photo) How to properly start covering a toilet with plastic panels

All apartment owners, especially housewives, try to make their home functional, comfortable, beautiful and original, if possible, at a low price. Until recently, there was a small choice: tiles, painting, wallpaper and wood. Now the choice is much richer, even if you choose a budget option.

Wall panels for toilet

There are specific conditions in the bathroom and toilet that limit the choice of finishing materials, such as high humidity and different sizes premises. Therefore, when choosing, you have to be guided by the resistance of materials to humidity and the cost of work. The market offers a selection of inexpensive, quick-to-install and moisture-resistant plastic materials. Plastic finishing of the walls and ceiling in the toilet attracts with its cost and the ability to create unusual interior various modern finishing plastics various forms, size and texture.

What wall panels are used for the toilet: varieties

There are 4 types of panels:

1. PVC sheets.
2. Wall MDF.
3. From fiberboard.
4. Based on chipboard.

Plastic for the bathroom has a tile or mosaic pattern with imitation seams, however Lately The popularity of matte ceramics is growing, which is more practical to care for and marks from water splashes are hardly noticeable on it.

Imitations like stone, brick, wood, and leather are also offered.

Panels made from MDF, fiberboard and chipboard are produced in three varieties:

1. The slats or slats are of small width; joining is done using a lock.
2. Square and triangular tiles 50x50 or 100x100 centimeters. They can be connected end-to-end, with profile connections or with a lock.
3. Sheets with dimensions 120x250 centimeters.

Depending on the shape, the installation method may vary; the slats will require lathing; the rest can be glued directly to the surface if the wall is flat, but it can also be glued to the frame.

The material from which the panels are made gives different resistance to moisture; those made from PVC are not afraid of contact with water; those from MDF and fiberboard depend on maintaining the integrity of the film covering them. Chipboard materials are the least resistant to water, but they are quite suitable for a toilet.

Finishing toilet walls and ceilings with plastic panels

Many apartment owners consider finishing toilets, walls and ceilings with plastic as the best option in terms of labor intensity and price, as well as creating original and cozy interior, which does not require complex care.

Before installation, measurements must be taken to determine the quantity necessary materials, purchase tools, prepare surfaces if necessary.

How to glue toilet panels to walls

If the walls and ceiling are fairly even, you can glue them to the surface without lathing; this will require glue, or “liquid nails.” When choosing this method, you need to ensure that the protrusions on the wall are no more than 3-4 millimeters; dents are not so important, they will be covered. The advantage of this finishing method is its speed; there is no need to mount a frame and drill many holes; the size of the room practically does not decrease. To work, you need to find a good glue; experts advise taking not a universal one, but one that is suitable specifically for the material that will be glued; it must meet the following conditions:

1. After drying, remain transparent.
2. Be resistant to changes in temperature and humidity.
3. Instantly bond surfaces and have a long-lasting effect.

Gluing is done in the following order:

1. The wall is primed with glue.
2. Glue is applied to the tiles at a distance of up to 30 centimeters; if the material is heavy, the distance must be reduced.
3. Wait a few minutes, press the tile to the surface with force.

How to glue panels to the ceiling

When gluing tiles to the ceiling, you need to take into account the dimensions so that you don’t have to cut the material and so that the coating doesn’t look bad. Therefore, for the ceiling you need to take tiles of such a size that in several pieces they completely cover the surface or take a small size.

Pasting algorithm:

1. The ceiling is primed with glue.
2. Apply glue to the tile on the side at 6-9 points.
3. We place the rest close together.
4. Apply and press with force.
5. For aesthetics, you can glue the baseboard.

How to attach best: methods

Can be mounted on a frame, wooden or metal. In this case, many holes will be drilled, you need to buy metal carcass or wooden beam, screws, dowels. With such repairs, at least 5 centimeters and a lot of time will be taken away from the size of the room.

Currently, thin wall tiles with a thickness of 3 millimeters are sold without internal partitions, only thin plastic with a pattern.

They are mounted simple gluing to the surface, are easily cut with scissors and do not reduce the size of the rooms.

Due to these advantages, this finish is considered optimal for the bathroom.

Advantages and disadvantages of plastic wall panels for the bathroom

The benefits include:

• cheapness;
• ease of repair;
• coating device speed;
• minimal surface preparation;
• care consists only of washing with detergents;
• durability.

Flaws:

• is flammable and emits a lot of toxic smoke;
• easily subjected to mechanical stress.
• When mounted on a frame, it takes up a significant area.

Do they require maintenance?

They do not require any maintenance; they can be washed with soap or water. detergents, which do not contain caustic and aggressive substances and solid particles that scratch plastic.

The desire of people to make the bathroom convenient and comfortable is understandable; some methods require large investments and the labor of qualified performers, others, like installing plastic, can inexpensively create an aesthetic appearance in the room, making it possible to ensure cleanliness and order with minimal effort.

Useful video

Do-it-yourself apartment renovations are always a source of pride for anyone. home handyman. But what if you have absolutely no experience in construction and finishing?

In this case, it is better not to touch complex rooms, such as the living room or kitchen, but you can practice on finishing the toilet. First of all, this is the most small room There is not a wide variety of finishing materials in the apartment either. In addition, if in the end nothing works out, you can turn to specialists, and they will redo everything without significant damage to your wallet.

The most common material for finishing a toilet is plastic panels, and it’s not just the ease of installation, there are a number of advantages that speak in favor of this option:

• A wide variety of colors and patterns that are great for decorating a toilet.
• Easy aftercare. Plastic panels are not at all afraid of water and detergents.
• Minimal financial costs for finishing work, even taking into account all the necessary components.
• No need for a huge number tool. Everything you need to decorate your toilet plastic panels any home craftsman can find it.

Selection of plastic panels for finishing the toilet

As often happens, due to the high demand for plastic panels, many unscrupulous manufacturers have appeared on the market. It is very difficult to determine the quality of plastic by eye, and to the average buyer they all seem the same. But this is not so, and in order not to become a victim of scammers who skimp on the quality of their products, you need to follow a few simple tips:

The correct choice of panels for the toilet is already 50 percent the key to a successful renovation. It's much easier to spend an extra hour in the store than to redo all the trim on next year, or even earlier.

Important ! When buying plastic panels for finishing a toilet, you should always take two or three segments in reserve.

If at the end of the repair it turns out that the initial calculations were incorrect, the same panels may no longer be available in the store.

Preparation for installation of plastic panels

A good master, any repair begins with preparatory work and making lists of everything needed. If this is not done, you may have to run to the hardware store more than once to get the missing materials or tools. Often, this takes much more time than the entire renovation, especially when it comes to such a small room as a toilet.

List of necessary materials for finishing the toilet

• Plastic panels with a small margin.
• Decorative elements: corners, baseboards. You also need to take it with a reserve.
• A wooden beam no more than 2 cm thick. The quantity is determined based on the installation horizontally, with a distance of approximately 30-50 cm.
• Impregnation for wood that prevents rotting, and a brush for applying it.
• Primer for walls with an antibacterial effect and a roller for its application.
• Dowels with a diameter of 6 mm and a length of 60-80 mm.
• Staples for a construction stapler.
• Glue for plastic. Will be needed to install external decorative corners.
• Self-tapping screws for wood. Will be needed to finish the riser in the toilet with plastic panels.
• Polyethylene film or thick fabric to protect the plumbing in the toilet.

Advice ! No need to save on consumables such as screws or staples. Fasteners are never superfluous in the household, and in finishing works oh, its deficiency can affect the service life of the entire repair.

List of necessary tools for finishing a toilet

• A hammer drill or hammer drill with impact mode, as well as a drill for it corresponding to the selected dowels.
• Hammer.
• Pencil, tape measure.
• Hacksaws for wood and plastic, or a jigsaw.
• Sharp construction knife.
• Metal spatula. Needed to remove old paint from the walls, if there is one.
• Construction stapler.
• Level with horizontal and vertical indicators.

Warning ! You should not cut timber and plastic panels with a grinder. As a result, a lot of acrid smoke, which the neighbors may mistake for a fire, and then you will have to explain it to them for a long time.

When both lists are collected and everything you need to finish the toilet is at hand, you can get to work.

Preparing the base for plastic panels

The quality and durability of any finish largely depends on the preparation of the base. Unlike more complex rooms in an apartment, finishing a toilet does not take much time and effort, so you need to pay attention to each stage Special attention. It’s better to spend two extra hours today than to redo everything later.

First of all, you need to completely clean the walls and ceiling of the toilet from old finishes or paint. This is done using a spatula and a light hammer, which is used to tap the surface. A coating that has become unusable will immediately disappear.

Next, the bars are prepared. They must be cut to the required length based on horizontal mounting to Wall. When all wooden elements When ready, they are treated with impregnations and taken out to dry on the balcony or staircase.

Important ! The size of the bars should be a few centimeters smaller than the toilet room. This is necessary so that the tree has the opportunity to expand.

In the meantime, while the bars are drying, there is time to continue preparing the walls in the toilet for finishing. They need to be treated generously with an antiseptic primer; it prevents the formation of mold and harmful fungi. Impregnation is done using a foam roller. To dry completely, when room temperature, it takes about an hour, which means you can take a short break and catch your breath.

Installation of wooden sheathing under plastic panels

When the walls in the toilet and the wood are completely dry, you can begin fastening. First of all, fix the block a couple of centimeters above the floor, along the entire perimeter of the toilet room. The timber is passed under the ceiling in the same way.

If the ceiling in the toilet will also be finished with plastic panels, then lathing is needed on it too; the fastening technology is no different from the wall one:

1. The block is applied to the surface, and using a hammer drill, a hole is drilled through the tree into the hay. The first fastening should be approximately five cm from the edge. A dowel is driven into the hole. The second edge is attached in the same way. Now that the block is fixed, it is further strengthened, with a step of 30-50 cm between dowels.
2. When the bars around the perimeter of the toilet room are installed, use a tape measure to measure the distance between the lower and upper bars. It is divided into two, and another beam is attached exactly in the middle of the wall.
3. The resulting two sections are once again divided in half, and the beam is placed again. This is done until the distance between the guides is approximately 50 cm.
4. Certain difficulties may arise with communications, which also need to be finished with plastic panels. To do this, boxes are made from the same block as the sheathing, which are attached to the wall and floor of the toilet. You can connect the bars together with wood screws.

Advice ! if spotlights are planned as ceiling lighting in the toilet, the block must be mounted below the ceiling, at least 15 cm. This is done using profile fasteners.

You can watch the video in more detail on how this is done.

Installation of plastic panels in the toilet

Before installing plastic panels, it is necessary to attach guide moldings to the corners of the toilet and to the ceiling.

All finishing strips are fastened with staplers to the bars

When installing plastic panels in a toilet with your own hands, always start from the left edge and the ridge to the corner. Using a construction stapler, fastening brackets are driven into the corner groove and ridge on the other side of the panel.

Important ! The first panel must be installed strictly in level. All other finishing elements will be oriented towards it.

The second plastic panel is inserted into the groove of the first and its ridge is also fixed with brackets along each wooden guide. All stages of installation are clearly shown in the video

After the walls of the toilet are completely covered with panels, the boxes covering the communications are finished. Here, perhaps, each panel will have to be cut to length; subsequently, these places will be covered with decorative corners.

In the same way, plastic panels are installed on the toilet ceiling. But here it is important to immediately make holes in the places of the lamps and bring the electrical wires out.

Installation of decorative elements on plastic panels

The easiest way to use it is to decorate the toilet outer corners, they are much more convenient to install and are not inferior in quality to those into which plastic panels must be inserted.

Plastic glue is applied to the corner and applied to the junction of the panels. Good glue It sets in a few seconds, so it is important to have time to glue the corner before it dries.

Using the same glue, floor and ceiling skirting boards are fixed. Any excess glue can be removed with a soft cloth, and at this point finishing the toilet with plastic panels with your own hands can be considered complete.

The matter remains with installing the necessary accessories and lamps, but this is a topic for another discussion.

Conclusion

As you can see, there is nothing complicated about decorating a toilet with panels yourself. All stages of repair will take a maximum of two days. Even if it's the first do-it-yourself repair in an apartment, it will allow you to gain invaluable experience, and perhaps the next step will be more complex premises, which also require repairs and finishing.

And in order to avoid the most common mistakes when renovating a bathroom, you can watch the video

When starting an apartment renovation, the main emphasis is on the main rooms in the house, such as the living room or bedroom. Repairing a toilet is often left for later, because there is no way to a large number of requirements. The environment here is not as aggressive as, for example, in the bathroom or kitchen. But there is one significant difficulty, namely the small space.

Most materials for wall decoration significantly reduce space, and if in the case of, for example, a living room this is acceptable, then in a cramped toilet every centimeter counts. That is why finishing bathrooms and toilets with PVC panels is the most common option.

The video shows how simple finishing PVC panels can transform a toilet room.

Advantages

• PVC panels can be mounted on minimum distance from the wall. In total, after finishing the walls, the room will lose only 3-5 cm.
• Plastic is not afraid of wet cleaning and detergents.
• Plastic panels are much cheaper than most finishing materials.
• Huge variety of colors and patterns.
• Finishing a toilet with your own hands, even without special skills, will only take a few hours.
• To work with panels, you do not need to level the walls. They will hide all the irregularities and mistakes of the builders.

Unfortunately, like any other material, PVC panels have a number of disadvantages, which also need to be taken into account when choosing a finish for a toilet.

Flaws

• Unlike wallpaper and painting, PVC panels will still take a few centimeters away from the room.
• Even though vinyl has low level ignition, when melting it emits caustic toxic smoke.
• PVC is of low quality and easily damaged. And they will need to be replaced.

As you can see, there are still fewer shortcomings. AND positive traits clearly winning. But in order to new renovation did not bring disappointments, you should know a few rules that must be followed when choosing PVC panels.

Selection Guide

At first glance, PVC panels differ only in design, but this is a misconception; the quality of the plastic can vary significantly depending on the manufacturer.

It is best to ask friends who have encountered this issue, since it is quite difficult to visually determine quality. But there are some tips:

1. The PVC panel must be soft. High-quality plastic can bend to an angle of more than 90 degrees. You can bend the panel slightly until you feel tension; the larger the angle, the better.
2. The fastening groove should bend freely without kinks, and return to its original position when you release it.
3. The panels should not emit any noticeable odors. A noticeable smell of plastic is a sign of poor quality production.

The next nuance that needs to be taken into account is the width of the panel. It can be from 12 to 35 cm; the wider the segment, the more carefully the sheathing will need to be leveled. The best option For walls, a width of less than 25 cm is considered.

Advice ! Panels wider than 25 cm can be used on the ceiling. There, a slight distortion will not be so noticeable.

Once these two factors are taken into account, you can move on to choosing colors and patterns. Here everything depends on personal preferences and the style of the overall interior of the apartment.

Preparation for installation of panels

Finishing a toilet with PVC panels will not take much time; a more complex and responsible process is making the sheathing on which the panels will be attached.

If the walls are perfectly smooth, or they have been plastered, then the panels can simply be glued to the wall without lathing. This method will save space, but the surface will first have to be treated with a primer.

Any DIY repair must begin with preparing the tool; this will avoid unnecessary fuss and significantly save time. The list of everything you need is not so long, and there is nothing specific in it:

• Roulette.
• Building level.
• Pencil.
• Hacksaws for wood and plastic (suitable for metal, with fine teeth).
• Hammer or drill with impact mode.
• Hammer.
• Construction stapler.

To make the sheathing, it is best to use a wooden beam 1.5-2 cm thick; for PVC panels this is quite enough and it will not steal much space. Before you begin to fasten the timber, it must be treated with impregnations that will protect it from the formation of mold and mildew.

First of all, using a hammer drill and dowels, the upper and lower strips are secured. The lower one should be located parallel to the floor and at a minimum distance from flooring. The top one is under the ceiling, but taking into account the future ceiling decoration.

The remaining bars are also attached horizontally at a distance of approximately 30 cm from each other.

Advice ! Meme less distance between the laths, the more firmly the panels will hold.

When all the sheathing bars are ready, you need to take care of the places where various accessories will be attached:

• Mirror.
• Hangers.
• Paper holders.

In these places you need to install small bars so that later when drilling holes in the plastic you do not damage it.

When the wood work is completed, install decorative corner in the left corner of the room, from where the installation of panels will begin. To install the corner it is best to use construction stapler, but if you don’t have one, furniture nails will do. They are similar in size to shoe boots, but have a wider clamping cap.

The corner is attached in 5-6 places at an equal distance, this is quite enough. If during the installation process a slight curvature appears, then you should not pay attention to it; subsequently it will straighten out with the panel.

The most difficult stage of finishing a toilet with PVC panels is behind us.

Panel installation

Installation begins on the left side, inserting the panel with the comb into the corner. The first segment must be set according to construction level, it will not be needed further.

Once the panel is exposed, a stapler or nail is driven into the tab of the groove. Fastenings are made into each bar along the entire height.

To clearly understand how the frame is manufactured and the panels are installed, you can watch the video. For clarity, the master demonstrates the process on a simple wall, and every nuance is clearly visible.

Important ! When reaching the places where the bars for attaching accessories are located, they need to be marked with a pencil so that you do not later have to look for this place through the installed panels.

In this way, fastening is carried out to the next corner. The edge panel is cut along its entire length and a corner is placed on it before installation. It will be fixed to next wall, where the next segments will come from.

Finishing in communication areas

The most difficult places for finishing work are communications. In order to cover the pipes with PVC panels, you will have to make wooden box, on which the panels will be attached. Sometimes such structures are intentionally made large sizes than required, then the decorative frame can also serve as an additional shelf.

Fastening panels to a frame is no different from finishing walls, the only difference is that the fastening is not made into a special groove, but into the body of the panel itself, as close to the edge as possible, subsequently this place will be covered with decorative fittings.

Advice ! for finishing boxes, it is better to use external corners that do not fit onto the panel, but are attached to it with glue.

An important point when finishing communications is to remember about valves and meters that may be located in toilet room. Access to such places should not be limited, so you will have to either make small doors, which is not so easy, or leave these places open.

Ceiling finishing

After the work with the walls is completed, you can move on to the ceiling. The principle here is the same, with the only difference that there is no need to install corners; their role will subsequently be played by ceiling plinths.

Advice ! To make the room look symmetrical, you can calculate the distance so that the joint of the panels runs exactly in the middle. In this case, you will have to cut not one, but two outer panels.

When finishing the ceiling, it is important to remember about lighting fixtures. It is better to drill holes in the required places on the floor before the panel is secured. And during installation, the wires are led out into the holes.

All stages of work can be seen in the video

Conclusion

When the ceiling and walls are completely finished, all that remains is to do finishing touches, namely, fix the baseboards. In stores you can find special skirting boards for PVC panels; they have a groove that is fixed on top of the panels, but to work with them you will have to carefully calculate the height of each segment.

Therefore, conventional ones are more often used plastic skirting boards, which are simply placed on construction adhesive. Working with them is much easier and there is no need to carry out complex calculations and measurements of each panel.

Connect last lighting and at this point the toilet renovation can be considered complete.

As seen, modern finishing installing a toilet with PVC panels is a completely simple process that anyone can handle. To do this, you do not need to have construction skills or experience, you just need to buy everything you need and follow the instructions.

Not a single family in our country or abroad can do without such an important event as repairs. In any case, it is inevitable that it is necessary to carry out repair and finishing work, both in the bathroom and in the toilet. And here there is not such a wide variation in methods and materials as, for example, in a living room or bedroom, but even a small separate toilet can be turned into a stylish and cozy place.

Plastic panels for bathroom and toilet walls

Many have heard about the wonderful and beautiful PVC panels that can be used both for the walls of a bathroom or toilet, and for the ceiling, and some types of such panels can also be laid on the floor surface. It all depends on the personal wishes of the person and his material capabilities.

On today's rich building material On the market you can find a wide range of types of plastic panels that can harmoniously decorate any bathroom and fit into the concept of almost any design.

Types of material:

• Wall panels made of plastic, decorated with a decorative frieze;
• Sheet type plastic panels;
• PVC panels imitating wood;
• Photo panels;
• Plastic panels with a laser-applied pattern;
• PVC panels with thermal printing.

Photo panels – decorative panels with photo printing applied on them. They allow you to create a design for wall panels with almost any image, be it a view of a fantasy world, a magnificent waterfall, or the face of an unloved boss.

It all depends on the wishes of the customer and the ideas of the design specialist.

Each of these types of panels for finishing a toilet or bathroom can be used in an interior of any complexity and theme, be it a hint of a Victorian house, or an imitation of Provence or Art Nouveau style.

Option for finishing a toilet with PVC panels: examples and photos

Despite the fact that many people have long seen what beauty can be created using plastic wall panels, what are the most interesting and exclusive ideas can be brought to life, they still do not understand why friends or relatives, when carrying out repairs, gave their preference to this particular type of panel, if there are many other materials, for example MDF panels.

The whole secret lies in the advantages of PVC panels over other decorative finishing materials for walls:

1. In the case of finishing toilet walls with plastic panels, a person does not face such a question as special preparation of the working surface of the walls. The panels can be mounted even on not the smoothest surfaces. This, as practice shows, allows you to save material resources, which usually go to additional work for leveling walls. In addition, the panels allow you to hide defects and unevenness of the walls.
2. Light plastic panels can be installed by one person, this is also a big plus, because in a bathroom or, especially, a toilet, there is not much space for several craftsmen to turn around.
3. PVC panels are an exclusively environmentally friendly finishing material. Over the entire period of its service, plastic for any temperature conditions remains safe for people and animals. Finished toilet like this wall panels does not rot, mold or mildew does not form on it even under the most high humidity, what is he doing plastic material ideal for use in the bathroom area.
4. Finishing with such slabs guarantees easy cleaning. Any housewife will confirm that this is a big plus when you don’t have to think about how best to spend wet cleaning in one room or another.
5. Ease of installation allows installation even by a novice master.
6. Great appearance material. Any pictures can be depicted on the panels. It all looks beautiful and impressive.
7. Long service life. With proper care, plastic panels can last for many decades.
8. Sheathing PVC walls panels are quite cheap due to the availability of prices for the material itself.

All these advantages of plastic panels allow them to become an increasingly popular and popular material for use in the interior of a toilet or bathroom. And yet, as practice shows, there cannot be only advantages. U wall panels PVC has a disadvantage - they can be quite fragile and break if you lean on them or throw something heavy or sharp at the wall.

Using panels in the toilet: photos and methods of decoration

Design solutions of specialists may imply the use of plastic panels for complete different surfaces and planes. The plastic panels themselves, depending on the thickness and maximum load, can be installed on different surfaces.

Namely:

1. On the walls. Classic application plastic panels. Here, the choice of the type and quality of material depends only on the wishes of the person himself, the designer’s ideas or the amount of available funds.
2. On the ceiling. Often used to visually increase space. For example, with the help of panels you can turn the ceiling into a sunny clear sky, or a starry night sky. A ceiling covered in this way in a large toilet can force a person’s brain to perceive the bathroom space on a larger scale.
3. On the floor. Floor option panels are not used so often, but are also quite popular. With the help of panels, you can turn an ordinary boring toilet floor into the bottom of the ocean or simply outer space, that is, whatever your heart desires.

In addition, it is worth mentioning that at this stage in the market of construction and finishing materials there is a wide selection of panel colors for any purpose. You can find red, black, white panels, colorful or with patterns.

Panels using photo printing are very popular.

For example, this method can allow you to recreate in the bathroom or toilet the atmosphere of being on a paradise island or in outer space or the ocean, where a complete feeling will be created that the owner is among exotic fish, especially if the walls, floor, and ceiling are made in the same style.

Repairing a toilet with plastic panels: photos and examples

When a choice has been made regarding the installation location of the panels, their type, color and all the nuances have been clarified, a person is faced with the question “how to install plastic panels?” There are the following options - contact a finishing specialist, pay him a certain amount and enjoy the work done, or do everything yourself. The latter option is more economical, and if you do the repairs yourself, it will be much more pleasant.

If you decide to carry out extensive installation yourself, then you should first decide on the type and features of installation work with plastic tiles. If using self-adhesive PVC tiles, then the work will not take much time. Will need to be removed protective layer and glue finishing material to the surface. It is worth understanding that in this case it is better to stick it on a flat surface. Installation using glue - the back surface of the tile is processed thin layer glue. Next it is glued to the surface of the wall of the bathroom or toilet. Installation work using lathing - in this case it is not required ideally smooth surface. A plastic or metal system lathing, to which plastic panels are subsequently glued. Tiles and panels are attached using adhesive solutions.

Finishing a toilet with plastic panels: design (video)

Some people prefer to do renovations in the entire house or apartment at the same time, while others prefer a leisurely, gradual renovation, when you work closely first on one room in your home, then on another, and gradually the whole house is renovated, but doing everything according to your ideas, it turns out very beautiful.

The toilet is no less frequently visited place than, for example, the kitchen. In this regard, many people try to make repairs as aesthetically pleasing and beautiful as possible using plastic panels. You can cover the walls with your own hands, without using the help of a specialist, where the end result will be no worse than if the work was carried out by a team of craftsmen.

Advantages of plastic panels and choice of material

The first step is to choose panels made of plastic, the appearance of which today can be assessed on the Internet, after first familiarizing yourself with photographs of the products. In addition, modern stores are full of a variety of decorative PVC. When choosing products for finishing a toilet, pay special attention to the composition. High quality material must contain carbon, hydrogen and chlorine, the latter of which must necessarily be 46 percent ethylene and 57 percent combined chlorine. In addition, lead must be used in the production process of plastic panels. This composition ensures that the finishing material will emit much less harmful substances in case of fire, in addition, it is worth noting that modern plastic in the solid state it hardly burns.

Finishing the toilet with PVC panels allows the walls to withstand high humidity and also easily tolerate various loads. Besides similar material has excellent heat resistance and insulation. And the main advantage of a plastic toilet is, of course, the low cost of finishing work when compared with others. In addition, PVC allows you to hide all existing unevenness on the walls in the toilet.

An important advantage is that when decorating a toilet with plastic panels, you do not have to waste time, effort and money on leveling the surfaces. In addition, your head will not be occupied with thoughts regarding the sounds that may be coming from the room, because PVC has excellent sound insulation.

Another advantage of such panels is that they can be used to successfully hide electrical wiring in the toilet without fear of a fire due to water ingress. If you purchase plastic products for finishing, the thickness of which will be 10 millimeters, then they can be safely used for lining not only the toilet, but also the kitchen and bathroom, since they will be an excellent replacement for expensive tiled flooring. In addition, PVC is great not only for finishing the toilet, but also other places that differ high humidity. As a rule, such places are sheathed with white plastic panels, but you can choose from laminated PVC, which can give the interior a beautiful look.

It is worth remembering that the main criterion in the process of choosing material for finishing a toilet is the final appearance on the wall of the room. And it is best to make a purchase through specialized stores rather than on the market. In addition, in stores they will be located directly on the walls, which will allow you to better imagine the finished appearance of the toilet after finishing. In addition, in stores the likelihood of encountering a fake is much less, since they carefully monitor the quality of the products received.

When purchasing plastic panels for finishing a toilet, carefully inspect the paint. Layer coloring material should be uniform and not contain black spots on the surface. All plastic panels should not have waves with differences, they should have the same dimensions. Otherwise, during the process of repairing the toilet, difficulties may arise when installing the products. In this case, unevenness in length is acceptable, since the plastic panels will straighten when fastened.

Finishing

Before you start covering the toilet, you need to carefully prepare the walls. This is quite simple to do: dilute a small amount of fat-free product in water, then rinse the surface of the walls. Next, wipe the walls with a dry cloth, leaving until completely dry.

Measure the toilet, namely its length, width and height. In this case, existing projections, as well as window and door openings, should be taken into account. To hide passing communications, you should calculate the most optimal size.

Toilet wall decoration

Frame installation

Calculate the number of plastic panels that will be needed to completely finish the toilet. Today in stores, as a rule, you can see panels whose width is 0.375 and 0.25 meters. If the walls in your toilet are not particularly even, then you should buy a dry lath that will allow you to mount the frame. In addition, do not forget to purchase finishing and starting profiles, skirting boards, corners for skirting boards, as well as internal and external corners. In this case, it is best to buy everything with a small margin.

Process the rail protective composition, which will protect the wood from the formation of mold and mildew. As soon as the lath is dry, you can begin installing the frame. Divide the slats into specific parts that will fully correspond to the horizontal dimensions of the wall. Secure 4 slats on each side. The fasteners should be parallel to the floor surface and to each other, with a gap between them of approximately half a meter. In progress installation work In the toilet you can use dowel nails.

Plastic trim

Decide for yourself which side is best to start finishing the frame. Adjust the corner or starting profile to size, in this case it all depends on where you are going to start finishing the toilet. Fix the profile over the frame; fastening can be done using a stapler or small self-tapping screws. For more quality installation It is recommended to use a level, since the installation of subsequent products will depend on the installation of the first plastic element.

Adjust the plastic panel to the required dimensions, then insert it into the starting profile until it stops. Using a stapler, attach the panel to the slats. The rest of the products should be finished in the same way.

Cut the plastic panels immediately before installation, having first measured the height. It is likely that strong differences may occur during the finishing process of the toilet. It is best to make holes for the plumbing hatch and ventilation using a sharp knife.

Ceiling finishing

Toilet ceiling trim plastic products differs only in method frame fastening. In this case, the frame itself must be installed on direct hangers, choosing light bars with a small cross-section or ceiling profile. This approach will allow you to most correctly place the lamps in the ceiling space, as well as control the height ceiling surface. At the same time, it is best to make holes for lamps using a sharp knife.

It is best to leave small gaps along the edges of the toilet ceiling, which will make installation easier in the future. ceiling plinth. If your toilet has smooth walls, then you can use the frameless method of wall finishing. In this case, plastic panels can be attached directly to the surface of the walls.

Choose what is best for finishing: mounting adhesive or dowel-nails. In the case of glue, you should coat the first plastic panel well, and then press it firmly against the wall.

Well, in this way, finishing the toilet with plastic panels is not so difficult, and therefore there is no need to delay the repair. Buy materials and get to work. Good luck.