Wood-burning cast iron stoves for summer cottages. Cast iron stoves fireplaces

Today, not only in country houses for seasonal use are installed solid fuel stoves, but also in country houses intended for permanent residence. Gas is not available everywhere, and the cost of electricity, growing every year, forces us to look for other sources of heat. Wood heating– the first of different options in the history of mankind. In addition, firewood is the most environmentally friendly fuel, characterized by good flammability and complete combustion. Therefore, wood-burning stoves have been around for centuries and are constantly being improved.

Advantages of long-burning cast iron stoves

If we talk about metal stoves for the home, then cast iron heating units have been tested for hundreds of years and are the most popular.

Advantages of cast iron

Why cast iron? There are several reasons for its popularity:

Advantages of cast iron stoves

And cast iron stoves for the home using solid fuel have some other useful qualities:

The disadvantage of cast iron stoves is that only the part of the house where it is installed is heated. But, if the device is used for water heating, then heat is supplied to all rooms.

Long-burning stoves-fireplaces

And if we talk about efficiency, then more and more often owners of dachas and country houses are inclined to choose fireplace stoves long burning. In such devices, not only solid fuel, but also pyrolysis gas, which is obtained as a result of combustion. The gas, which includes methane, hydrogen and carbon oxides, is obtained when in the combustion chamber minimal amount oxygen and firewood only smolder, but do not burn. For combustion of pyrolysis gas a separate firebox is provided, which is located above the combustion chamber.

In the combustion chamber, the bottom is made in the form of a grate, under which there is an ash pan - a special box for ash and solid combustion waste.

In long-burning fireplace stoves, the combustion chamber door is made of fire-resistant transparent glass and is hermetically sealed. The tightness allows you to limit the access of air into the chamber, and the transparency allows you to admire the play of fire in the fireplace.

Long-burning stoves for homes are distinguished not only by high efficiency, but efficiency, stylish design and mobility. Most models can support set temperature for ten hours. But they have high requirements for chimney installation and equipment installation.

In addition, the firewood for them must be dry.

Rules for choosing a stove

Manufacturers in many countries offer a wide selection of solid fuel stoves. To make the right choice, you need to answer several questions.

Leading manufacturers of cast iron stoves

There are many cast iron solid fuel stoves on the market with different functions, using different materials and therefore in a wide price range.

Cast iron stoves- fireplaces from the Guca industrial plant from Serbia are distinguished by efficiency, heating safety, high efficiency, long service life, heating efficiency, stylish and aesthetic appearance, wide model range any price category. Cast iron structure for the house of the Arina line is different interesting design castings and decorative elements and can operate in three combustion modes, with the minimum mode ensuring firewood combustion for eight hours. And the Mercury model is distinguished by great power with modest dimensions and a cooking surface.

That Arina tall has already worked for two seasons. One hundred and eighty cubic meters of house is heated perfectly, fuel is consumed very moderately. Great stove, good value for money.

Artem, Moscow

Edil Kamin long-burning cast iron stoves made in Italy confirm the desire of the country's residents for elegance and beautiful interior. Luxurious fireplaces Edil Kamin, made in different styles from classic to minimalism, become a decoration of country houses. In addition, they are distinguished by high quality, balanced air supply to the firebox, an improved aerodynamic scheme for removing combustion products, a secondary afterburning system and precise mechanical operation.

Recently purchased for country house stove-fireplace with oven Edilkamin Dafne Forno. Bribed her elegant look, beautiful ceramics and oven. The oven is small, but it’s exactly what you need for the cottage. Warm, beautiful, tasty - three in one.

Natalya, Mr. Nizhny Novgorod

Harvia brand of Finnish-made cast iron stoves - recognized leader in the production of heating equipment with long established traditions and innovative technologies space heating. This brand produces models for baths with adjustable legs(“Harvia 20 SL”), with a volumetric boiler for heating water and fire protection(“Harvia 20 SL Boiler”), combined, which can be used both as a cast iron stove-fireplace for a summer residence, and as a heating element in a bath or sauna (“Harvia 20 DUO”). All Harvia models differ according to consumer reviews high quality.

Cast iron stove Russian production of the Meta group of companies is distinguished by its simplicity of design and design, as well as its low cost. Sealed doors with heat-resistant glass, special heat-resistant paint, and a design that takes into account Russian climatic conditions attract consumers. Stove-fireplace Meta Corsica 12 completely cast iron, including grate. Glass insert on its door can withstand temperatures up to 700 °C, and a special cord in its design prevents the uncontrolled flow of air.

Russian fireplace stoves from the Ecofireplace Bavaria company are made according to modern technologies on new equipment. They differ large area glazing made of soot-resistant material, lining the firebox with fireclay slabs that protect against burnout, two operating modes (open burning and economical) and a wide range of models, including options with a stove, for any consumer.

I chose a Bavaria cast iron stove for my dacha. I was pleased with its price and the ability to cook with it. I saved space, money, and fuel by not having to buy a separate stove for cooking. So far everything is fine.

Oleg Nikolaevich, 47 years old

A huge number of products from many manufacturers with additional functions and without them, in different designs, in a wide price range allows you to choose exactly the model that will provide warmth and comfort in your home.

Cast iron stove- an excellent solution for solving heating problems, be it a private house or dacha. Modern production allows us to produce not only functional, but also very impressive devices that will fit into any interior and quickly heat a room of up to 150 m 2.

Cast iron has long been used as a material for manufacturing heating devices behind high strength indicators, heat resistance and heat transfer. The disadvantages of this alloy include the fact that it is quite heavy, for example, compared to steel, and does not tolerate sudden changes well temperatures (if a jet hits the hot cast iron cold water, it may burst).

Kinds

Based on your requirements, you can choose purchase:

heating stove designed for heating a room and maintaining heat for a long time;
Cooking and heating equipped with a cooking zone;
Stove-fireplace.

Heating stove quickly will warm the room And will keep you warm for a long time - this is its main and most important function, although it looks very attractive.

A stove with a built-in hob, and sometimes also with an oven will give Not only warm but also delicious dinner.

Fireplace will complement the interior premises and will create an unforgettable atmosphere of comfort and coziness.

External design and components

Form And configuration may be different:

Rectangular;
Square;
Oval and so on.

Colors and design too varies. Beautiful appearance does not exclude the high functionality of the device, which includes:

Heating panel with door;
Grate for combustion products to fall out and ash;
Ash pan(classic with a door or retractable, allowing you to remove ash right at the time of use);
Chimney.

Attention! Typically portable stoves involve the use of pellet and briquettes, but if you want to heat with wood, you can purchase a model with a deep firebox.

Features of the design of cast iron stoves

It is also important mobility this kind heating equipment, it is easy to transport and move, some models are equipped with handles for convenience.

Heat dissipation such a device is enough high, the most promising in terms of this indicator are those where both solid fuel and gas, which is formed when there is a very low supply of oxygen to the firebox.

If there is a lack of oxygen, wood does not burn, but smoldering, and the gas released during this process is disposed of in another chamber provided by the device. In this case, one load of raw materials will be enough to 5-6 hours.

The combustion intensity in portable stoves is regulated by a special device - gate and, as in brick ovens, an ash pan door.

Cooking and heating furnaces– more complex mechanism, capable of combining several functions. Yes, you can Vacation home heat, cook dinner, and dry fruit for the winter.

Such devices include one or more burners, less often the oven. Coefficient useful action such a furnace is quite high and can reach 80% .

Stoves and fireplaces They are distinguished by the presence of a fire-resistant glass door or direct access to the fire, which further enhances the feeling of warmth and comfort in the house.

Principle of operation

Today, a wide range of furnace equipment is based on three principles work:

Standard ovens– the device is mounted in the chimney, can be equipped with a hob or without it. Ignition occurs in the firebox, the burning speed is regulated gate or damper door. The fire is maintained by throwing solid raw materials, the heat is retained for some time after the end of this process, due to the good thermal conductivity of cast iron. These the models are simple both in design and operation.
Furnaces with water circuit- a more complex modification, which has two rows of walls between which water is poured. Such a device may well be used How boiler and heat not just one separate room, but the whole house. An additional advantage is the constant access to hot water.
Stoves with long burning effect, which were already mentioned earlier. This device allows maximum use fuel economically, maintain a stable room temperature and is characterized by a very high efficiency index ( 80-85% ).

Important! Modern cast iron stoves can operate on either solid, liquid or gaseous fuel. For these purposes, the firebox is equipped with special devices.

Compared to classic brick kilns, cast iron devices get hot faster, are standing cheaper, but their heat transfer is lower.

Advantages

These heating devices have quite a lot of positive qualities, here relate:

Compactness. Despite the rather thick walls, the dimensions of the cast product are quite small and it can fit into any room;
Appearance. Progress does not stand still and currently products are cast in any configuration with a variable range decoration. Such a device will become not only a heating device, but also a worthy piece of furniture;
High efficiency And efficiency during operation;
Minimal preparation for installation– no foundation is required, near the chimney you only need to cover the floor non-flammable material, for example, lay out this area with tiles, cover it with a sheet of tin, and so on;
Fast room heating area up to 150 m2;
Ability to regulate combustion intensity fuel through special device. A modification with a slow burning effect allows you to heat rooms at night.

Flaws

Cons such devices have absolutely A little, and they can rather be called operating features, here relate:

For proper operation devices a tall chimney is required;
If cold water comes into contact with the housing cast iron may crack;
For cast iron extremely negatively affects high humidity , which may result in the appearance of rust.

Cast iron products are sufficient heavy, which is both an advantage and a disadvantage. Thus, the thick walls of the oven make it quite heavy, which makes transportation a little more difficult. At the same time, it is the thickness of the walls that allows for more for a long time keep warm in the house.

Thus, a cast iron portable stove - great alternative cumbersome and complex. She easy to install and further use, fits perfectly into any interior. Model, color and configuration can be completely different.

The heat transfer of cast iron is somewhat less than that of brick, but much higher than, for example, that of steel. For a summer residence or country house this is generally perfect option - it will take very little time for a cold room to be filled with an atmosphere of warmth and comfort.

In the next video photo selection of cast iron stoves suitable for heating a home:

In our online store you can always buy long-burning stoves and fireplaces. We are pleased to offer models that are ideal for the garden or home. It is also important that we do not inflate the cost of products. You can easily choose the right product. All you have to do is order required quantity firewood to keep the fireplace burning.

Fireplace stoves: reasons for popularity

Wood-burning fireplaces for a country house or cottage are indispensable in the cold season. With their help you can create a comfortable and cozy atmosphere even on the coldest rainy day. Just imagine sitting down in front of the fireplace in the evening and enjoying your relaxation. It will be especially interesting with your family. In front of a standard or corner wood-burning fireplace, you can have pleasant conversations and gradually immerse yourself in pleasant bliss.

The models we offer are compact, productive and at the same time inexpensive. Having installed a stove in your dacha, you can only be surprised that you didn’t do this earlier! With the help of a fireplace for your cottage, you will fill the space with amazing comfort.

Which wood-burning fireplaces should you choose for your home or cottage?

Fireplaces are presented in a wide range. Our store takes care of all customers (including those on a limited budget). Making a choice will not be difficult.

Familiarize yourself with the appearance of the devices. Corner and other fireplace models are supplemented with photos.
Pay attention to power. A fireplace stove that burns for a long time must quickly warm up the room.
Explore other characteristics of the models.

We sell wood-burning fireplaces for cottages and other properties, differing in:

Ease of use. Fireplace stoves for summer cottages are as easy to use as possible.
Compact size. You can install a fireplace even in a small house.
Safety of use. Modern technologies are used to develop stoves for cottages and other objects.
Excellent heat transfer performance. Long burning is not the only advantage of fireplace stoves. The models quickly provide heat to even large rooms.
Attractive appearance. You can always order a corner or standard model in accordance with the interior of the room.

Advantages of ordering long-burning wood-burning fireplaces (stoves) in our store

A wide range of fireplaces and stoves for the country house or cottage.
Optimal cost. You can choose stoves for a modern country house even on a limited budget.
Convenient online catalogue. Each fireplace (long burning) is supplemented with an image and description.
Help with choosing. Don’t know which fireplace stove to order in our online store? Just contact the specialists. They will help you choose suitable wood-burning devices.
Prompt delivery in Moscow and other cities.

Choose! All presented wood-burning fireplaces for the home deserve your attention.

Typically, cast iron stoves are made as one piece. This is the secret of their strength: the absence of various fasteners and welds makes the product as strong and durable as possible.

It is also much easier to produce various kinds of decorative elements using the casting method, therefore wood stoves made of cast iron is much cheaper than analogues made of other materials.

Another advantage of cast iron stoves is their long service life.

They tolerate sudden temperature changes well. Service life of furnaces from of this material 40% more than analogues made of steel.

Wood-burning cast iron stove POV-57 - army

The wood-burning cast iron stove POV-57 was first tested in Russia and designed for the army. Therefore, its appearance and operating features are quite specific. The manufacturer of this product is the Russian Military Industrial Complex.

Typically, a typical cast iron stove of this design, cast entirely from cast iron, can efficiently heat a room of up to 40 m2.

That is, it will be quite enough for heating studio apartment. Almost anything can be used as fuel: brown or coal, anthracite dust, ordinary firewood and just garbage.

A potbelly stove (called POV-57 in common parlance) made of cast iron will even allow you to cook dinner or simply warm food.

A typical POV-57 stove is shaped like a cylinder, has a fuel combustion chamber, an ash pan, and a section for storing firewood. The factory version is coated with a special heat-resistant powder paint, and then with enamel.

Its overall dimensions are very small. Height is 525 mm, width - 320 mm, depth - 330 mm. Weight is 43 kg. The cost of one copy usually ranges from 6 thousand rubles.

Country stove PCH-2 BLMZ - an amateur gardener's assistant

The country stove, solid cast iron, marked as PCh-2 BLMZ, was designed in Russia and is produced here. It is produced by many manufacturers, so there are various modifications for both a large country house and a small dacha.

The model in question has a power of only 5 kW. But this is usually enough for heating a small country house, garage, basement with a volume of up to 100 m 3.

Externally, despite its cheapness, the stove looks quite presentable: there are four twisted legs, often decorative ornaments on the door and side walls.

Present hob with one burner, you can easily cook food on it: hob Due to its small thickness, it heats up very quickly.

An important feature is compactness. The depth of the fuel chamber is 540 mm, the width of the stove itself is 350 mm, the height including the legs is 560 mm. Another difference is the relatively low price. It rarely exceeds 9 thousand rubles.

The Sologne model solid cast iron stove was designed in France, but today it has gained great popularity in Russia. Produced by a manufacturer called Invicta.

Considered heating device heats the room by convection. The area that can be heated using this stove is 80 m2 with a ceiling height of no more than 2.5 m.

The maximum power is as much as 8 kW, and this is a lot for such modest dimensions.

The stove is cast in the shape of a cylinder and has a very pleasant appearance and color. Covered with special heat-resistant powder paint.

A bunch of decorative elements indicate the French origin of this product. The overall dimensions of the stove are modest: height is 915 mm, depth – 510 mm, width – 410 mm. Weight is 58 kg.

Both wood and coal can be used as fuel. The cost of such a stove can range from 34 thousand rubles. up to 36 thousand rubles.

The Polish stove from the manufacturer Eurokom, model Gustav, with a stove has excellent performance parameters.

Availability hob allows you to cook in the absence of gas or electricity, because the panel will provide quick cooking and heating food.

Power is 12 kW, so it can warm up and maintain constant temperature in a room up to 120 m2.

Only wood or brown coal can be used as firewood. The walls are double, which is the secret of uniform heat supply.

In appearance, this cast iron stove is more reminiscent of a fireplace. The design is unique and somewhat brutal.

The door is equipped with special heat-resistant glass, so the oven acts not only as a source of heat, but also light.

Its overall dimensions are quite modest: height – 680 mm, width – 650 mm, depth – 440 mm. Weight is 110 kg.

Cost – at least 34 thousand rubles.

The birthplace of the brand called "Meta" is France, but the model is cast iron wood burning stove Lyon has been produced in Russia for a long time.

The stove in question can easily heat a room of up to 100 m2. Its power is about 10 kW.

The firebox is designed in such a way that even when the flame goes out, the cast iron continues to give off heat. Only ordinary firewood and brown coal briquettes can be used as fuel.

The design of the fireplace stove bears a true imprint of the spirit of France, and each line speaks of the origin of the product.

Special heat-resistant glass built into the door allows you not only to heat the room, but also to illuminate it.

A convenient ash drawer makes it easy to dispose of combustion products. The overall dimensions are quite typical for a stove of this type: height is 690 mm, width – 560 mm, depth – 425 mm. Weight is 98 kg.

The cost of this model reaches 31 thousand rubles.

Another stove from the homeland of the Musketeer

The Meta company came to us from France and has proven itself well in our country. The Marseille stove-fireplace is produced in the Russian Federation.

The power of a wood-burning cast iron stove, despite its rather modest dimensions, as much as 7 kW. That is why it is able to heat a room of up to 70 m2.

The door uses Japanese-made fireproof glass Neoceram N-O.

The stove door and other movable elements fit as closely as possible to the closed openings, which allows you to avoid the risk of smoke entering the room.

The design is conservative, but it looks very elegant. Strict lines make it possible to use it in almost all modern styles.

The hole for connecting the chimney is located in the upper part of the housing.

Overall dimensions are small. Its height is 800 mm, depth – 360 mm, width – 410 mm. The weight is 80 kg, so there may be some problems during transportation.

The cost of this model is 26.5 thousand rubles.

A Polish manufacturer called Eurocom has long been producing the Oscar cast iron stove model for residential and country houses. Manufacturing is carried out both in Poland and in Russia.

Wood is usually used as fuel. Its power is 7 kW, so it can easily cope with heating a room up to 70 m2.

The door is equipped with heat-resistant glass, there is a system called “clean glass”: contamination of the inner surface of the door with ash and other combustion products is excluded.

Using a special air supply regulator, you can control the combustion temperature in the combustion chamber.

The appearance brings to mind the 18th century; asceticism and conservatism are visible in Oscar's design. Antique shaped legs and ventilation holes only strengthen this impression.

The surface is covered with special heat-resistant powder paint. Height is 610 mm, width – 470 mm, depth – 410 mm. The cost of relatively similar models is low - 22.2 thousand rubles.

Eurokom Torn WG stove (coal and wood)

Eurokom produces excellent cast iron heating stoves, and the model called Torn is no exception. It is produced in the Russian Federation.

Its power is 7 kW, while the area of the heated room is at least 70 m 2. The efficiency is 70%, and the combustion temperature of wood is 282 0 C.

The Torn oven is compact and has a miniature appearance. The peculiar ornaments surrounding the stove create the impression of the presence of antiquity.

The long handle on the transparent door allows you not to worry about getting burned when igniting and adding firewood. Painted in dark color special paint.

The height is 640 mm and the width is 460. Therefore, it can be placed even in a very small room without fear of accidentally setting something on fire. The cost of Torn WG is 22 thousand rubles.