Thermal storage capacity of materials. Brick: fireclay Vs ceramic High heat capacity much faster than brick

Creation optimal microclimate and the consumption of thermal energy for heating a private house in the cold season largely depends on the thermal insulation properties of the building materials from which the building is constructed. One of these characteristics is heat capacity. This value must be taken into account when choosing building materials for constructing a private house. Therefore, the heat capacity of some building materials will be considered next.

To heat any material with mass m from temperature t start to temperature t end, you will need to spend a certain amount of thermal energy Q, which will be proportional to the mass and temperature difference ΔT (t end -t start). Therefore, the heat capacity formula will look like this: Q = c*m*ΔT, where c is the heat capacity coefficient ( specific value). It can be calculated using the formula: c = Q/(m* ΔТ) (kcal/(kg* °C)).

Table 1

What should the walls of a private house be like in order to comply building regulations? The answer to this question has several nuances. To understand them, an example will be given of the heat capacity of the 2 most popular building materials: concrete and wood. The heat capacity of concrete is 0.84 kJ/(kg*°C), and that of wood is 2.3 kJ/(kg*°C).

At first glance, you might think that wood is a more heat-intensive material than concrete. This is true, because wood contains almost 3 times more thermal energy than concrete. To heat 1 kg of wood you need to spend 2.3 kJ of thermal energy, but when cooling it will also release 2.3 kJ into space. At the same time, 1 kg of concrete structure can accumulate and, accordingly, release only 0.84 kJ.

From the obtained result we can conclude that 1 m 3 of wood will accumulate heat almost 2 times less than concrete.

An intermediate material in terms of heat capacity between concrete and wood is brickwork, a unit volume of which under the same conditions will contain 9199 kJ of thermal energy. At the same time, aerated concrete, like construction material, will only contain 3326 kJ, which will be significantly less wood. However, in practice the thickness wooden structure maybe 15-20 cm, when aerated concrete can be laid in several rows, significantly increasing specific heat capacity walls.

Tree

Brick

ostroymaterialah.ru

How is specific heat capacity determined?

Specific heat capacity is determined during laboratory tests. This indicator completely depends on what temperature the material has. The heat capacity parameter is necessary so that in the end you can understand how heat resistant they will be external walls heated building. After all, the walls of buildings must be built from materials whose specific heat capacity tends to a maximum.

In addition, this indicator is necessary for making accurate calculations in the process of heating various types of solutions, as well as in situations where work is carried out at sub-zero temperatures.

One cannot help but say about solid bricks. This material boasts a high thermal conductivity. Therefore, in order to save money, hollow bricks come in handy.

Types and nuances of brick blocks

In order to ultimately erect a sufficiently warm brick building, you initially need to understand exactly what type of this suitable material for this to the greatest extent. Currently, a huge assortment of bricks is available in markets and construction stores. So which one should you prefer?

In our country it is extremely popular among buyers. sand-lime brick. This material is obtained by mixing lime with sand.

The demand for sand-lime brick is due to the fact that it is often used in everyday life and has a fairly reasonable price. If we touch on the issue of physical quantities, then this material, of course, is in many ways inferior to its counterparts. Due to the low thermal conductivity, build a truly warm house It is unlikely that it will work out of sand-lime brick.

But, of course, like any material, sand-lime brick has its advantages. For example, it has a high sound insulation rate. It is for this reason that it is very often used for the construction of partitions and walls in city apartments.

Ceramic brick takes second place in the demand ranking. It is obtained by stirring various types clays, which are subsequently fired. This material is used for the direct construction of buildings and their cladding. Construction type used for the construction of buildings, and facing - for their decoration. It is also worth mentioning that ceramic-based bricks are very light in weight, so they are ideal material for independent implementation construction work.

New to the construction market is warm brick. This is nothing more than an advanced ceramic block. This type can be approximately fourteen times larger in size than the standard. But this in no way affects the total weight of the building.

If we compare this material with ceramic bricks, then the first option in terms of thermal insulation is twice as good. The warm block has a large number of small voids that look like channels located in a vertical plane.

And as you know, the more air space is present in the material, the higher the thermal conductivity. Heat loss in this situation occurs in most cases on the partitions inside or in the joints of the masonry.

Thermal conductivity of bricks and foam blocks: features

This calculation is necessary so that it is possible to reflect the properties of the material, which are expressed in relation to the density of the material to its ability to conduct heat.

Thermal homogeneity is an indicator that is equal to the inverse ratio of the heat flow passing through the wall structure to the amount of heat passing through a conditional barrier and equal to total area walls.

In fact, both calculation options are quite complex process. It is for this reason that if you do not have experience in this matter, then it is best to seek help from a specialist who can accurately make all the calculations.

So, to summarize, we can say that physical quantities are very important when choosing a building material. How could you see different types bricks, depending on their properties, have a number of advantages and disadvantages. For example, if you want to build a really warm building, then it is best for you to give preference warm look brick, whose thermal insulation indicator is at the maximum level. If you are limited in money, then the best option You will be better off buying sand-lime brick, which, although it retains heat minimally, does an excellent job of eliminating extraneous sounds from the room.

1pokirpichy.ru

Definition and formula of heat capacity

Each substance, to one degree or another, is capable of absorbing, storing and retaining thermal energy. To describe this process, the concept of heat capacity was introduced, which is the property of a material to absorb thermal energy when heating the surrounding air.

To heat any material with mass m from temperature t start to temperature t end, you will need to spend a certain amount of thermal energy Q, which will be proportional to the mass and temperature difference ΔT (t end -t start). Therefore, the heat capacity formula will look like this: Q = c*m*ΔТ, where c is the heat capacity coefficient (specific value). It can be calculated using the formula: c = Q/(m* ΔТ) (kcal/(kg* °C)).

Conventionally assuming that the mass of the substance is 1 kg, and ΔТ = 1°C, we can obtain that c = Q (kcal). This means that the specific heat capacity is equal to the amount of thermal energy that is expended to heat a material weighing 1 kg by 1°C.

Using heat capacity in practice

Building materials with high heat capacity are used for the construction of heat-resistant structures. This is very important for private houses in which people live permanently. The fact is that such structures allow you to store (accumulate) heat, thanks to which the house maintains comfortable temperature enough for a long time. At first heating device heats the air and the walls, after which the walls themselves warm up the air. This allows you to save cash on heating and make your stay more comfortable. For a house in which people live periodically (for example, on weekends), the building material will have a high thermal capacity reverse effect: such a building will be quite difficult to heat quickly.

The heat capacity values ​​of building materials are given in SNiP II-3-79. Below is a table of the main building materials and their specific heat capacity values.

Table 1

Brick has a high heat capacity, so it is ideal for building houses and constructing stoves.

Speaking about heat capacity, it should be noted that heating stoves It is recommended to build from brick, since the value of its heat capacity is quite high. This allows you to use the stove as a kind of heat accumulator. Thermal accumulators in heating systems(especially in water heating systems) are used more and more every year. Such devices are convenient because they only need to be heated well once with an intense firebox. solid fuel boiler, after which they will heat your home for a whole day or more. This will significantly save your budget.

Heat capacity of building materials

What should the walls of a private house be like in order to comply with building codes? The answer to this question has several nuances. To understand them, an example will be given of the heat capacity of the 2 most popular building materials: concrete and wood. The heat capacity of concrete is 0.84 kJ/(kg*°C), and that of wood is 2.3 kJ/(kg*°C).

At first glance, you might think that wood is a more heat-intensive material than concrete. This is true, because wood contains almost 3 times more thermal energy than concrete. To heat 1 kg of wood you need to spend 2.3 kJ of thermal energy, but when cooling it will also release 2.3 kJ into space. At the same time, 1 kg of concrete structure can accumulate and, accordingly, release only 0.84 kJ.

But don't rush to conclusions. For example, you need to find out what heat capacity 1 m2 of concrete and wooden wall 30 cm thick. To do this, you first need to calculate the weight of such structures. 1 m 2 given concrete wall will weigh: 2300 kg/m3 *0.3 m3 = 690 kg. 1 m 2 of wooden wall will weigh: 500 kg/m 3 * 0.3 m 3 = 150 kg.

• for a concrete wall: 0.84*690*22 = 12751 kJ;
• for a wooden structure: 2.3*150*22 = 7590 kJ.

From the obtained result we can conclude that 1 m 3 of wood will accumulate heat almost 2 times less than concrete. An intermediate material in terms of heat capacity between concrete and wood is brickwork, a unit volume of which under the same conditions will contain 9199 kJ of thermal energy. At the same time, aerated concrete, as a building material, will contain only 3326 kJ, which will be significantly less than wood. However, in practice, the thickness of a wooden structure can be 15-20 cm, when aerated concrete can be laid in several rows, significantly increasing the specific heat capacity of the wall.

Use of various materials in construction

Tree

For comfortable living in a home, it is very important that the material has high heat capacity and low thermal conductivity.

In this regard, wood is the best option for houses not only for permanent but also for temporary residence. Wooden building, not heated long time, will perceive changes in air temperature well. Therefore, heating of such a building will occur quickly and efficiently.

Mainly used in construction conifers: pine, spruce, cedar, fir. In terms of price-quality ratio, the best option is pine. Whatever you choose to design wooden house, must be taken into account next rule: the thicker the walls, the better. However, here you also need to take into account your financial capabilities, since with an increase in the thickness of the timber, its cost will increase significantly.

Brick

This building material has always been a symbol of stability and strength. The brick has good strength and resistance to negative influences external environment. However, if we take into account the fact that brick walls are mainly designed with a thickness of 51 and 64 cm, then to create good thermal insulation they additionally need to be covered with a layer thermal insulation material. Brick houses great for permanent residence. Once heated, such structures are capable of releasing the heat accumulated in them into space for a long time.

When choosing a material for building a house, you should take into account not only its thermal conductivity and heat capacity, but also how often people will live in such a house. Right choice will allow you to maintain coziness and comfort in your home throughout the year.

You may be interested in: drilling a water well in Kaluga: the cost is reasonable

opt-stroy.net

Specific heat capacity of materials

Heat capacity is a physical quantity that describes the ability of a material to accumulate temperature from a heated environment. Quantitatively, specific heat capacity is equal to the amount of energy, measured in J, required to heat a body weighing 1 kg by 1 degree.
Below is a table of the specific heat capacity of the most common materials in construction.

• type and volume of heated material (V);
• the specific heat capacity of this material (Sud);
• specific gravity (msp);
• initial and final temperatures of the material.

Heat capacity of building materials

The heat capacity of materials, the table for which is given above, depends on the density and thermal conductivity of the material.

And the thermal conductivity coefficient, in turn, depends on the size and closedness of the pores. Finely porous material having closed system pores, has greater thermal insulation and, accordingly, lower thermal conductivity than large-porous.

This is very easy to see using the most common materials in construction as an example. The figure below shows how the thermal conductivity coefficient and the thickness of the material influence the thermal insulation qualities of external fences.

The figure shows that building materials with lower density have a lower thermal conductivity coefficient.
However, this is not always the case. For example, there are fibrous types of thermal insulation for which the opposite pattern applies: the lower the density of the material, the higher the thermal conductivity coefficient will be.

Therefore, you cannot rely solely on the indicator of the relative density of the material, but it is worth taking into account its other characteristics.

Comparative characteristics of the heat capacity of basic building materials

In order to compare the heat capacity of the most popular building materials, such as wood, brick and concrete, it is necessary to calculate the heat capacity for each of them.

First of all, you need to decide on the specific gravity of wood, brick and concrete. It is known that 1 m3 of wood weighs 500 kg, brick - 1700 kg, and concrete - 2300 kg. If we take a wall whose thickness is 35 cm, then through simple calculations we get that specific gravity 1 sq.m of wood will be 175 kg, brick - 595 kg, and concrete - 805 kg.
Next, we will select the temperature value at which thermal energy will accumulate in the walls. For example, this will happen on a hot summer day with an air temperature of 270C. For the selected conditions, we calculate the heat capacity of the selected materials:

1. Wall made of wood: C=SudhmuddhΔT; Sder=2.3x175x27=10867.5 (kJ);
2. Concrete wall: C=SudhmuddhΔT; Cbet = 0.84x805x27 = 18257.4 (kJ);
3. Brick wall: C=SudhmuddhΔT; Skirp = 0.88x595x27 = 14137.2 (kJ).

From the calculations made, it is clear that with the same wall thickness, concrete has the highest heat capacity, and wood has the least. What does this mean? This suggests that on a hot summer day maximum amount heat will accumulate in a house made of concrete, and the least amount of heat will accumulate in a house made of wood.

This explains the fact that in wooden house In hot weather it is cool, and in cold weather it is warm. Brick and concrete easily accumulate a fairly large amount of heat from the environment, but just as easily part with it.

stroydetali.com

EVERYTHING IS FREE EXCEPT THE BRAINS

VIDEO OF EQUIPMENT OPERATION

STRAW in CONSTRUCTION
In the village of Taptykovo Res. Bashkortostan an energy efficient house was built made of laminated veneer lumber with insulation, built by engineer Alfred Fayzullin.
This is the first house in the Republic of Bashkortostan that meets Green Standards.

New generation house: hot water from the sun, and savings on heating due to insulation.
Although economical, the house combines energy efficiency, environmental friendliness and modern style.

In the morning the sun illuminates the entire house from the south side, and in the evening - from the west. The location of the windows here is thought out to the smallest detail. Five-chamber windows are also part of energy-saving technology.
The glass is made using silver, which allows it to reflect heat.

A special feature of this house is that there is no need for heating. traditional methods and low power consumption.
Sources used here alternative energy - solar collector and a heat pump.

Application of the system supply and exhaust ventilation with heat recovery creates a favorable indoor microclimate. The house uses windows and doors with high thermal resistance. The “City Corner” assembly technology ensures the absence of “cold bridges” around the entire perimeter of the house, thanks to a continuous layer of insulation. All this eliminates large heat losses and significantly reduces heating costs (two to three times compared to gas heating). The cost of such a turnkey house varies from 30 thousand rubles per square meter, depending on the area of ​​the house, its equipment, and finishing materials.

“This is a very interesting, modern and timely project, technologies of tomorrow.
This mechanism is only part of an energy-efficient private house in Taptykovo.
The owner of this unique structure and its inventor. He says that during the construction of the “green house” passive laminated veneer lumber which allows you to retain heat. The material from which it is made is now produced by the Uchalinsky enterprise.

Application heat pump instead of an electric boiler. It effectively uses environmental heat for heating and hot water supply at home and allows you to save energy consumption by up to 29 times.
On hot days, this technology serves to cool the premises.

There are only a few such houses in Russia so far.
When designing it, Alfred Faizullin used Japanese and German technologies.
He notes that during the operation and disposal of the house, the structure will not have any impact on nature.
Smart a private house They plan to improve it in the future.
The designers want to use a hydraulic accumulator and also create a heat accumulator.
The water temperature in a 300 m³ tank, even in cloudy weather, does not fall below 40 degrees
As a source of thermal energy, the engineer purchased a Viessmann heat pump with a power of 9.7 kW.
I had to pay 424,000 rubles for the heat pump.
Vertical probes were placed in two wells, each 63 meters deep.
Drilling cost 1,600 rubles per linear meter
Let's make a reservation right away: Alfred Fayzullin built a house for himself and did not skimp on technology, choosing the best. As a result, the cost square meter“turnkey” amounted to 45,000 rubles. The total area of ​​the house is 180 m2.

Passive house must consume no more than 10% from the traditional pump with a power of 9.7 kW. too much for such a house.
The standard for a passive house is 15 kW. per m2 international requirement for harsh climates for the heating season.
15 kW/213 days * 180 m2= 12.7 kW/m2 norm per day or 380 kW for 30 days.

How to build it yourself inexpensive warm house, with your own hands, we have the answer, you are at the right place, find out the details, how to make your own solar heating.

The smart one is not the one who has more opportunities, but the one who has a lot of ideas in his head.

Happy is not the person who has a lot of money, but the one who has more wisdom.

The richest man is not the one who has more money, and the one who needs less.

The smart one is not the one who earns a living, but the wise one for whom the smart one works.

The age of business today, the strong take away from the weak, the smart take away from the strong.

A person is happy not when there is more good, but when less is enough.

Money rules the world, the more of it, the more rights.

There is an idea, there is no means to implement it, we need wise solutions for smart thoughts.

It is not the one who has more money who is successful, but the one who has more ideas put into practice.

It is possible to know, but to be able to do it is more difficult; there is a big gap between them.

straw-house.ru

Ceramic

Based on production technology, bricks are classified into ceramic and silicate groups. Moreover, both types have significant differences in material density, specific heat capacity and thermal conductivity coefficient. The raw material for the manufacture of ceramic bricks, also called red bricks, is clay, to which a number of components are added. The formed raw blanks are fired in special ovens. The specific heat capacity can vary between 0.7-0.9 kJ/(kg K). Concerning medium density, then it is usually at the level of 1400 kg/m3.

Among the strengths of ceramic bricks are:

1. Smoothness of the surface. This increases its external aesthetics and ease of installation.
2. Resistance to frost and moisture. Under normal conditions, walls do not require additional moisture and thermal insulation.
3. Ability to carry high temperatures. This allows the use of ceramic bricks for the construction of stoves, barbecues, and heat-resistant partitions.
4. Density 700-2100 kg/m3. This characteristic is directly affected by the presence of internal pores. As the porosity of a material increases, its density decreases and its thermal insulation characteristics increase.

Silicate

As for sand-lime brick, it can be solid, hollow and porous. Based on size, there are single, one-and-a-half and double bricks. On average, sand-lime brick has a density of 1600 kg/m3. The noise-absorbing characteristics of silicate masonry are especially appreciated: even if we are talking about a wall of small thickness, its level of sound insulation will be an order of magnitude higher than in the case of other types of masonry material.

Facing

Separately, it is worth mentioning the facing brick, which with equal success resists both water and increased temperature. The specific heat capacity of this material is at the level of 0.88 kJ/(kg K), with a density of up to 2700 kg/m3. Facing bricks are available for sale in a wide variety of shades. They are suitable for both cladding and laying.

Refractory

Represented by dinas, carborundum, magnesite and fireclay bricks. The mass of one brick is quite large due to its significant density (2700 kg/m3). The lowest heat capacity when heated is carborundum brick 0.779 kJ/(kg K) for a temperature of +1000 degrees. The heating rate of a furnace laid from this brick significantly exceeds the heating of fireclay masonry, but cooling occurs faster.

Furnaces are built from refractory bricks, providing heating up to +1500 degrees. For specific heat capacity of this material heating temperature has a big influence. For example, the same fireclay brick at +100 degrees it has a heat capacity of 0.83 kJ/(kg K). However, if it is heated to +1500 degrees, this will provoke an increase in heat capacity to 1.25 kJ/(kg K).

Dependence on temperature of use

The technical performance of bricks is greatly influenced by temperature regime:

• Trepelny. At temperatures from -20 to + 20, the density varies within 700-1300 kg/m3. The heat capacity indicator is at a stable level of 0.712 kJ/(kg K).
• Silicate. A similar temperature regime of -20 - +20 degrees and a density from 1000 to 2200 kg/m3 provides the possibility of different specific heat capacities of 0.754-0.837 kJ/(kg K).
• Adobe. When the temperature is identical to the previous type, it demonstrates a stable heat capacity of 0.753 kJ/(kg K).
• Red. Can be used at temperatures of 0-100 degrees. Its density can vary from 1600-2070 kg/m3, and its heat capacity can range from 0.849 to 0.872 kJ/(kg K).
• Yellow. Temperature fluctuations from -20 to +20 degrees and a stable density of 1817 kg/m3 gives the same stable heat capacity of 0.728 kJ/(kg K).
• Building. At a temperature of +20 degrees and a density of 800-1500 kg/m3, the heat capacity is at the level of 0.8 kJ/(kg K).
• Facing. The same temperature regime of +20, with a material density of 1800 kg/m3, determines the heat capacity of 0.88 kJ/(kg K).
• Dinas. Operation at elevated temperatures from +20 to +1500 and density 1500-1900 kg/m3 implies a consistent increase in heat capacity from 0.842 to 1.243 kJ/(kg K).
• Carborundum. As it heats from +20 to +100 degrees, a material with a density of 1000-1300 kg/m3 gradually increases its heat capacity from 0.7 to 0.841 kJ/(kg K). However, if the heating of the carborundum brick is continued further, its heat capacity begins to decrease. At a temperature of +1000 degrees it will be equal to 0.779 kJ/(kg K).
• Magnesite. A material with a density of 2700 kg/m3 with an increase in temperature from +100 to +1500 degrees gradually increases its heat capacity of 0.93-1.239 kJ/(kg K).
• Chromite. Heating a product with a density of 3050 kg/m3 from +100 to +1000 degrees provokes a gradual increase in its heat capacity from 0.712 to 0.912 kJ/(kg K).
• Chamotte. It has a density of 1850 kg/m3. When heated from +100 to +1500 degrees, the heat capacity of the material increases from 0.833 to 1.251 kJ/(kg K).

Select the bricks correctly, depending on the tasks at the construction site.

kvartirnyj-remont.com

TYPES OF BRICKS

SILICATE

Thermal conductivity of this type on average is 0.7 W/(m oC). This is a fairly low figure compared to other materials. That's why warm walls This type of brick will most likely not work.

CERAMIC

1. Building,
2. Facing.

• Full-bodied – 0.6 W/m* oC;
• Hollow brick - 0.5 W/m* oC;
• Slot – 0.38 W/m* oC.

The average heat capacity of a brick is about 0.92 kJ.

WARM CERAMICS

Warm brick is a relatively new building material. In principle, it is an improvement on the usual ceramic block.

Thermal insulation properties are almost 2 times better compared to ceramic bricks. The thermal conductivity coefficient is approximately 0.15 W/m* oC.

stroy-bloks.ru

Types of bricks

In order to answer the question: “how to build a warm house from brick?”, you need to find out what type of brick is best to use. Because modern market offers a huge selection of this building material. Let's look at the most common types.

Silicate

Sand-lime bricks are the most popular and widely used in construction in Russia. This type made by mixing lime and sand. This material has become very widespread due to its wide range of applications in everyday life, and also due to the fact that its price is quite low.

However, if you turn to physical quantities this product, then not everything is so smooth.

Consider the double sand-lime brick M 150. Brand M 150 speaks of high strength, so it even comes close to natural stone. Dimensions are 250x120x138 mm.

The thermal conductivity of this type is on average 0.7 W/(m o C). This is a fairly low figure compared to other materials. Therefore, warm walls made of this type of brick most likely will not work.

An important advantage of such bricks compared to ceramic ones is soundproofing properties, which have a very beneficial effect on the construction of walls enclosing apartments or separating rooms.

Ceramic

Second place in popularity building bricks reasonably given to ceramic ones. To produce them, various mixtures of clays are fired.

This type is divided into two types:

1. Building,
2. Facing.

Construction bricks are used for the construction of foundations, walls of houses, stoves, etc., and facing bricks are used for finishing buildings and premises. This material is more suitable for DIY construction, as it is much lighter than silicate.

The thermal conductivity of a ceramic block is determined by the thermal conductivity coefficient and is numerically equal to:

• Full-bodied – 0.6 W/m* o C;
• Hollow brick - 0.5 W/m* o C;
• Slot - 0.38 W/m* o C.

The average heat capacity of a brick is about 0.92 kJ.

Warm ceramics

Warm brick is a relatively new building material. In principle, it is an improvement on the conventional ceramic block.

This type of product is much larger than usual; its dimensions can be 14 times larger than standard ones. But this does not greatly affect the overall weight of the structure.

Thermal insulation properties are almost 2 times better compared to ceramic bricks. The thermal conductivity coefficient is approximately 0.15 W/m* o C.

A block of warm ceramics has many small voids in the form of vertical channels. And as mentioned above, the more air in the material, the higher thermal insulation properties of this building material. Heat loss can occur mainly on internal partitions or in masonry joints.

Summary

We hope our article will help you understand large quantities physical parameters of the brick and choose the most suitable option by all indicators! And the video in this article will provide Additional information on this topic, see.

Thermal conductivity and heat capacity of brick are important parameters that allow you to decide on the choice of material for the construction of residential buildings, maintaining the required level of heat in them. Specific indicators are calculated and presented in special tables.

What are they and what affects them?

Thermal conduction is the process that occurs within a material when thermal energy is transferred between particles or molecules. In this case, the colder part receives heat from the hotter part. Energy losses and heat emissions occur in materials not only as a result of the heat transfer process, but also during radiation. It depends on the structure of the substance.

Each building component has a certain thermal conductivity indicator, obtained experimentally in the laboratory. The process of heat distribution is uneven, so it looks like a curve on the graph. Thermal conductivity is a physical quantity that is traditionally characterized by a coefficient. If you look at the table, you can easily notice the dependence of the indicator on the operating conditions of the material. Extended reference books contain up to several hundred types of coefficients that determine the properties of building materials of various structures.

As a guide when choosing, three conditions are indicated in the table: ordinary - for temperate climate and average humidity in the room, the “dry” state of the material, and “wet” - that is, operation in conditions of an increased amount of moisture in the atmosphere. It is easy to notice that for most materials the coefficient increases with increasing environmental humidity. The “dry” state is defined at temperatures from 20 to 50 degrees above zero and normal atmospheric pressure.

If the substance is used as a heat insulator, the indicators are chosen especially carefully. Porous structures retain heat better, while denser materials release it more strongly. environment. That's why traditional insulation have the lowest thermal conductivity coefficients.

As a rule, glass wool, foam and aerated concrete with a particularly porous structure are optimally suited for construction. The denser the material, the greater thermal conductivity it has, therefore transferring energy to the environment.

Types of materials and their characteristics

Brick, produced today in many types, is used in construction everywhere. Not a single object - a large industrial building, a residential apartment building or a small private house - is built without a brick foundation. The construction of cottages, popular and relatively inexpensive, is based exclusively on brickwork. Brick has long been the main building material.

This happened due to its universal properties:

• reliability and durability;
• strength;
• environmental friendliness;
• excellent sound and noise insulation characteristics.

The following types of bricks are distinguished.

• Red. Made from fired clay and additives. It is distinguished by reliability, durability and frost resistance. Suitable for erecting walls and building foundations. Usually placed in one or two rows. Thermal conductivity depends on the presence of gaps in the product.

• Clinker. The most durable and dense facing brick. Due to its high density, a solid, solid and reliable stove material also has the most significant thermal conductivity coefficient. And therefore it makes no sense to use it for walls - it will be cold in the house, and significant insulation of the walls will be required. But clinker brick is indispensable in road construction and when laying floors in industrial buildings.

• Silicate. Inexpensive material made from a mixture of lime and sand, often products are combined into blocks for improvement operational properties. When constructing buildings, not only solid silicate, but also silicate with voids is used. The durability of the sand block is average, and the thermal conductivity depends on the size of the connection, but still remains quite high, so the house will require additional insulation.

The indicator for a slotted briquette is lower compared to its analogue without internal gaps. It should also be noted that the product absorbs excess moisture.

• Ceramic. Modern and beautiful material, produced in a significant assortment. If we talk about thermal conductivity, it is significantly lower than that of ordinary red brick.

There are full-bodied ceramic briquettes, fire-resistant and slotted, with voids. The heat conductivity coefficient depends on the weight of the brick, the type and number of cracks in it. Warm ceramics are beautiful on the outside and have many fine gaps inside, making them very warm and therefore ideal for construction. If the ceramic product also has pores that reduce weight, the brick is called porous.

The disadvantages of such bricks include the fact that individual units are small and fragile. Therefore, warm ceramics are not suitable for all designs. In addition, this is an expensive material.

As for refractory ceramics, this is the so-called fireclay brick - a burnt block of clay with a high thermal conductivity, almost the same as that of ordinary solid material. At the same time, fire resistance is a valuable property that is always taken into account during construction.

Fireplaces are made from such “stove” brick; it has an aesthetic appearance, retains heat in the house due to high thermal conductivity, is frost-resistant, and is not affected by acids and alkalis.

Specific heat capacity is the energy required to heat one kilogram of material by one degree. This indicator is needed to determine the heat resistance of the building walls, especially when low temperatures Oh.

For products made of clay and ceramics, this figure ranges from 0.7-0.9 kJ/kg. Sand-lime brick gives values ​​of 0.75-0.8 kJ/kg. Fireclay is capable of increasing heat capacity from 0.85 to 1.25 when heated.

Comparison with other materials

Among the materials that can compete with brick, there are both natural and traditional ones - wood and concrete, and modern synthetic ones - penoplex and aerated concrete.

Wooden buildings have long been erected in northern and other low-lying areas. winter temperatures areas, and this is not without reason. The specific heat capacity of wood is significantly lower than that of brick. Houses in this area are built from solid oak, coniferous trees, and chipboard is also used.

If wood is cut across the grain, the thermal conductivity coefficient of the material does not exceed 0.25 W/M*K. Chipboard also has a low rate - 0.15. And the most optimal coefficient for construction is wood cut along the grain - no more than 0.11. It is obvious that in houses made of such wood excellent heat retention is achieved.

The table clearly demonstrates the spread in the thermal conductivity coefficient of brick (expressed in W/M*K):

• clinker – up to 0.9;
• silicate - up to 0.8 (with voids and cracks - 0.5-0.65);
• ceramic – from 0.45 to 0.75;
• slot ceramics – 0.3-0.4;
• porous – 0.22;
• warm ceramics and blocks – 0.12-0.2.

At the same time, only warm ceramics and porous bricks, which are also expensive and fragile, can compete with wood in terms of heat retention in the house. However, brickwork is used more often in the construction of walls, and not only because of its high cost. solid wood. Wooden walls are afraid of precipitation and fade in the sun. Wood also does not like chemical influences; moreover, wood can rot and dry out, and mold forms on it. Therefore, this material requires special processing before construction begins.

In addition, fire can very quickly destroy wooden structure, since wood burns well. In contrast, most types of brick are quite resistant to fire, especially fireclay brick.

As for others modern materials, for comparison with brick, foam block and aerated concrete are usually chosen. Foam blocks are concrete with pores, which includes water and cement, a foaming composition and hardeners, as well as plasticizers and other components. The composite does not absorb moisture, is highly frost-resistant, and retains heat. It is used in the construction of low (two to three floors) private buildings. Thermal conductivity is 0.2-0.3 W/M*K.

Aerated concrete is very strong connections similar structure. They contain up to 80% pores, providing excellent heat and sound insulation. The material is environmentally friendly and easy to use, as well as inexpensive. The thermal insulation properties of aerated concrete are 5 times higher than those of red brick, and 8 times higher than those of silicate brick (thermal conductivity coefficient does not exceed 0.15).

However, gas block structures are afraid of water. In addition, they are inferior to red brick in terms of density and durability. One of the building materials in demand on the market is extruded polystyrene foam, or penoplex. These are slabs designed for thermal insulation. The material is fireproof, does not absorb moisture and does not rot.

According to experts, this composite can only withstand comparison with brick in terms of thermal conductivity. The insulation has an indicator equal to 0.037-0.038. Penoplex is not dense enough, it does not have the necessary bearing capacity. Therefore, it is best to combine it with brick when building walls, while masonry of one and a half hollow bricks supplemented with penoplex will allow you to achieve compliance with building standards for thermal insulation of a living space. Penoplex is also used for the foundations of houses and blind areas.

The choice of brick as a building material for the construction of walls of any premises, stoves or fireplaces is made on the basis of its properties related to the ability to conduct, retain heat or cold, and withstand exposure to high or low temperatures. The most important heat specifications: thermal conductivity coefficient, heat capacity and frost resistance.

This name was previously understood only as elements standard size(250x120x65) made of baked clay. Now they produce and sell building products made from any suitable components, having the shape of a regular parallelepiped and dimensions similar to those of the classic ceramic version.

Main varieties:

• ceramic ordinary (construction) - a classic red stone made of baked clay;
• ceramic front - has better external qualities, increased resistance to weathering, usually has cavities inside;
• silicate solid - light gray in color from a pressed sand-limestone mixture, inferior to ceramic in all respects (including thermal engineering), except for strength;
• silicate hollow - characterized by the presence of cavities that increase the ability of the walls to retain heat;
• hyperpressed - made of cement with pigments that give shades natural material, the fillers of the mixture are crushed limestone, marble, granules of blast furnace slag;
• fireclay - intended for laying stoves, fireplaces, chimneys;
• clinker - differs from the usual one in that special types of clay and higher firing temperatures are used in its production;
• warm ceramics (porous stone) - its characteristics far exceed the thermal conductivity of red brick, this is achieved due to the presence of air-filled pores in the clay mass and the special design of the element, which has a large number of voids inside.

Coefficient of thermal conductivity

Thermal conductivity of a substance - quantitative characteristic its ability to conduct energy (heat). To compare it, the thermal conductivity coefficient of different building materials is used - the amount of heat passing through a sample of unit length and area per unit time at a unit temperature difference. It is measured in Watt/meter*Kelvin (W/m*K).

When choosing a brick for building walls, pay attention to the thermal conductivity index, since the minimum permissible thickness of the structure depends on it. The lower the value, the better wall retains heat and the thinner it can be, the more economical the consumption. The same parameter is taken into account when selecting the type of insulation, the size of its layer and technology.

Thermal conductivity depends on the following factors:

• material: the best indicators are for warm porous ceramics, the worst are for hyper-pressed or silicate bricks;
• density - the higher it is, the worse the heat is retained;
• the presence of voids in products - the cavities inside the slotted wall stone after installation are filled with air, due to this, heat or coolness in the room is better retained.

Based on the coefficient of thermal conductivity in the dry state, the following types of masonry are distinguished:

• highly effective - up to 0.20;
• increased efficiency - from 0.21 to 0.24;
• effective - from 0.25 to 0.36;
• conditionally effective - from 0.37 to 0.46;
• ordinary - more than 0.46.

When performing calculations, choosing facing and building bricks and insulation, it is taken into account that the ability of a wall to conduct heat depends not only on the properties of the material, but is also characterized by the thermal conductivity coefficient of the mortar and the thickness of the joints.

Heat capacity

This is the amount of heat (energy) that must be supplied to a body to increase its temperature by 1 Kelvin. The unit of measurement for this indicator is Joule per Kelvin (J/K). Specific heat capacity is its ratio to the mass of a substance, the unit of measurement is Joule/kg*Kelvin (J/kg*K). For brick, its value is from 700 to 1250 J/kg*K. More exact numbers depend on the material from which a particular type is made.

The parameter affects the energy consumption required to heat the house: the lower the value, the faster the room warms up and the less funds will go towards payment. It is especially important if the residence in the house is not permanent, that is, the walls need to be warmed up periodically. The best option is silicate, but accurate calculations It is recommended to have it done by a specialist. It is necessary to take into account not only the heat capacity of the wall, but also its thickness, the heat capacity of the masonry mortar, the width of the joints, the location of the room and the heat transfer coefficient.

Frost resistance

Expressed in the number of freeze-thaw cycles that the element can withstand without significant deterioration in properties. It is not the lower temperature level that matters, but the frequency of freezing of moisture in the pores. Water, turning into ice, expands, which contributes to the destruction of the stone.

Frost resistance is usually indicated by an index that contains the capital letter F and numbers. For example: the F50 marking indicates that this material begins to lose strength no earlier than after 50 freeze-thaw cycles. Possible grades of brick for frost resistance (GOST 530-2012): F25; F35; F50; F100; F200; F300. Based on the indicated figure, you need to understand that the number of cycles does not coincide with the number of seasons.

In some regions, sudden temperature changes can occur many times during one winter. For load-bearing walls It is recommended to use a minimum of F35, for cladding - from F75. Options with lower rates are only suitable for regions with mild climates.

In fact, when choosing building materials for the construction of a particular building, it is imperative to pay attention to their physical dimensions. And the specific heat capacity of brick in the issue under consideration is no exception. But, of course, in order to understand what effect a physical quantity has on a brick, you must first understand what it actually is.

What indicators should you pay attention to when choosing a brick?

1. Specific heat capacity is an indicator of exactly how much heat is required to heat 1 kg of a substance per 1°C.
2. Thermal conductivity is also of great importance for bricks. It indicates the amount of heat the material can transfer from both internal and external outside at different temperature conditions.
3. What the heat transfer rate will be depends entirely on what kind of material you purchase for the construction of the building. In order to find out the final indicator for a wall with numerous layers, it is necessary to proceed from the thermal conductivity indicator for each individual layer.

How is specific heat capacity determined?

Sand-lime brick is very popular. It is obtained by mixing lime with sand.

Specific heat capacity is determined during laboratory tests. This indicator completely depends on what temperature the material has. The heat capacity parameter is necessary so that you can ultimately understand how heat-resistant the external walls of a heated building will be. After all, the walls of buildings must be built from materials whose specific heat capacity tends to a maximum.

In addition, this indicator is necessary for making accurate calculations in the process of heating various types of solutions, as well as in situations where work is carried out at sub-zero temperatures.

One cannot help but say about solid bricks. This material boasts a high thermal conductivity. Therefore, in order to save money, hollow bricks come in handy.

Types and nuances of brick blocks

In order to ultimately erect a sufficiently warm brick building, you initially need to understand what type of material is most suitable for this. Currently, a huge assortment of bricks is available in markets and construction stores. So which one should you prefer?

In our country, sand-lime brick is extremely popular among buyers. This material is obtained by mixing lime with sand.

The demand for sand-lime brick is due to the fact that it is often used in everyday life and has a fairly reasonable price. If we touch on the issue of physical quantities, then this material, of course, is in many ways inferior to its counterparts. Due to the low thermal conductivity, it is unlikely that it will be possible to build a truly warm house from sand-lime brick.

But, of course, like any material, sand-lime brick has its advantages. For example, it has a high sound insulation rate. It is for this reason that it is very often used for the construction of partitions and walls in city apartments.

Ceramic brick takes second place in the demand ranking. It is obtained by mixing various types of clays, which are subsequently fired. This material is used for the direct construction of buildings and their cladding. The building type is used for the construction of buildings, and the facing type is used for finishing them. It is also worth mentioning that ceramic-based bricks are very light in weight, so they are an ideal material for independent construction work.

A new product on the construction market is warm brick. This is nothing more than an advanced ceramic block. This type can be approximately fourteen times larger in size than the standard. But this in no way affects the total weight of the building.

If we compare this material with ceramic bricks, then the first option in terms of thermal insulation is twice as good. The warm block has a large number of small voids that look like channels located in a vertical plane.

And as you know, the more air space is present in the material, the higher the thermal conductivity. Heat loss in this situation occurs in most cases on the partitions inside or in the joints of the masonry.

Thermal conductivity of bricks and foam blocks: features

This calculation is necessary so that it is possible to reflect the properties of the material, which are expressed in relation to the density of the material to its ability to conduct heat.

Thermal uniformity is an indicator that is equal to the inverse ratio of the heat flow passing through the wall structure to the amount of heat passing through a conditional barrier and equal to the total area of ​​the wall.

In fact, both calculation options are quite complex processes. It is for this reason that if you do not have experience in this matter, then it is best to seek help from a specialist who can accurately make all the calculations.

So, to summarize, we can say that physical quantities are very important when choosing a building material. As you can see, different ones, depending on their properties, have a number of advantages and disadvantages. For example, if you want to build a really warm building, then it is best for you to give preference to a warm type of brick, whose thermal insulation value is at its maximum. If you are limited in money, then the best option for you would be to buy sand-lime brick, which, although it retains heat minimally, does an excellent job of eliminating extraneous sounds from the room.

Picking up suitable material for carrying out one or another type of construction work, Special attention you should pay attention to its technical characteristics. This also applies to the specific heat capacity of brick, on which the house’s need for subsequent thermal insulation and additional wall decoration largely depends.

Characteristics of brick that affect its use:

• Specific heat. A value that determines the amount of thermal energy required to heat 1 kg by 1 degree.
• Thermal conductivity. Very important characteristic for brick products, allowing you to determine the amount of heat transferred from the room to the street.
• The level of heat transfer of a brick wall is directly affected by the characteristics of the material used for its construction. In cases where we are talking about multi-layer masonry, it will be necessary to take into account the thermal conductivity of each layer separately.

Ceramic

Based on production technology, bricks are classified into ceramic and silicate groups. Moreover, both types have significant differences in material density, specific heat capacity and thermal conductivity coefficient. The raw material for the manufacture of ceramic bricks, also called red bricks, is clay, to which a number of components are added. The formed raw blanks are fired in special ovens. The specific heat capacity can vary between 0.7-0.9 kJ/(kg K). As for the average density, it is usually at the level of 1400 kg/m3.

Among the strengths of ceramic bricks are:

1. Smoothness of the surface. This increases its external aesthetics and ease of installation.
2. Resistance to frost and moisture. Under normal conditions, walls do not require additional moisture and thermal insulation.
3. Ability to withstand high temperatures. This allows the use of ceramic bricks for the construction of stoves, barbecues, and heat-resistant partitions.
4. Density 700-2100 kg/m3. This characteristic is directly affected by the presence of internal pores. As the porosity of a material increases, its density decreases and its thermal insulation characteristics increase.

Silicate

As for sand-lime brick, it can be solid, hollow and porous. Based on size, there are single, one-and-a-half and double bricks. On average, sand-lime brick has a density of 1600 kg/m3. The noise-absorbing characteristics of silicate masonry are especially appreciated: even if we are talking about a wall of small thickness, its level of sound insulation will be an order of magnitude higher than in the case of other types of masonry material.

Facing

Separately, it is worth mentioning the facing brick, which with equal success resists both water and increased temperature. The specific heat capacity of this material is at the level of 0.88 kJ/(kg K), with a density of up to 2700 kg/m3. Facing bricks are available for sale in a wide variety of shades. They are suitable for both cladding and laying.

Refractory

Represented by dinas, carborundum, magnesite and fireclay bricks. The mass of one brick is quite large due to its significant density (2700 kg/m3). The lowest heat capacity when heated is carborundum brick 0.779 kJ/(kg K) for a temperature of +1000 degrees. The heating rate of a furnace laid from this brick significantly exceeds the heating of fireclay masonry, but cooling occurs faster.

Furnaces are built from refractory bricks, providing heating up to +1500 degrees. The specific heat capacity of a given material is greatly influenced by the heating temperature. For example, the same fireclay brick at +100 degrees has a heat capacity of 0.83 kJ/(kg K). However, if it is heated to +1500 degrees, this will provoke an increase in heat capacity to 1.25 kJ/(kg K).

Dependence on temperature of use

The technical performance of bricks is greatly influenced by temperature conditions:

• Trepelny. At temperatures from -20 to + 20, the density varies within 700-1300 kg/m3. The heat capacity indicator is at a stable level of 0.712 kJ/(kg K).
• Silicate. A similar temperature regime of -20 - +20 degrees and a density from 1000 to 2200 kg/m3 provides the possibility of different specific heat capacities of 0.754-0.837 kJ/(kg K).
• Adobe. When the temperature is identical to the previous type, it demonstrates a stable heat capacity of 0.753 kJ/(kg K).
• Red. Can be used at temperatures of 0-100 degrees. Its density can vary from 1600-2070 kg/m3, and its heat capacity can range from 0.849 to 0.872 kJ/(kg K).


• Yellow. Temperature fluctuations from -20 to +20 degrees and a stable density of 1817 kg/m3 gives the same stable heat capacity of 0.728 kJ/(kg K).
• Building. At a temperature of +20 degrees and a density of 800-1500 kg/m3, the heat capacity is at the level of 0.8 kJ/(kg K).
• Facing. The same temperature regime of +20, with a material density of 1800 kg/m3, determines the heat capacity of 0.88 kJ/(kg K).
• Dinas. Operation at elevated temperatures from +20 to +1500 and density 1500-1900 kg/m3 implies a consistent increase in heat capacity from 0.842 to 1.243 kJ/(kg K).
• Carborundum. As it heats from +20 to +100 degrees, a material with a density of 1000-1300 kg/m3 gradually increases its heat capacity from 0.7 to 0.841 kJ/(kg K). However, if the heating of the carborundum brick is continued further, its heat capacity begins to decrease. At a temperature of +1000 degrees it will be equal to 0.779 kJ/(kg K).
• Magnesite. A material with a density of 2700 kg/m3 with an increase in temperature from +100 to +1500 degrees gradually increases its heat capacity of 0.93-1.239 kJ/(kg K).
• Chromite. Heating a product with a density of 3050 kg/m3 from +100 to +1000 degrees provokes a gradual increase in its heat capacity from 0.712 to 0.912 kJ/(kg K).
• Chamotte. It has a density of 1850 kg/m3. When heated from +100 to +1500 degrees, the heat capacity of the material increases from 0.833 to 1.251 kJ/(kg K).

Select the bricks correctly, depending on the tasks at the construction site.

kvartirnyj-remont.com

Types of bricks

In order to answer the question: “how to build a warm house from brick?”, you need to find out what type of brick is best to use. Since the modern market offers a huge selection of this building material. Let's look at the most common types.

Silicate

Sand-lime bricks are the most popular and widely used in construction in Russia. This type is made by mixing lime and sand. This material has become very widespread due to its wide range of applications in everyday life, and also due to the fact that its price is quite low.

However, if we turn to the physical quantities of this product, then not everything is so smooth.

Consider the double sand-lime brick M 150. The M 150 brand indicates high strength, so it even comes close to natural stone. Dimensions are 250x120x138 mm.

The thermal conductivity of this type is on average 0.7 W/(m o C). This is a fairly low figure compared to other materials. Therefore, warm walls made of this type of brick most likely will not work.

An important advantage of such bricks compared to ceramic ones is their soundproofing properties, which have a very beneficial effect on the construction of walls enclosing apartments or dividing rooms.

Ceramic

The second place in popularity of building bricks is rightfully given to ceramic ones. To produce them, various mixtures of clays are fired.

This type is divided into two types:

1. Building,
2. Facing.

Construction bricks are used for the construction of foundations, walls of houses, stoves, etc., and facing bricks are used for finishing buildings and premises. This material is more suitable for DIY construction, as it is much lighter than silicate.

The thermal conductivity of a ceramic block is determined by the thermal conductivity coefficient and is numerically equal to:

• Full-bodied – 0.6 W/m* o C;
• Hollow brick - 0.5 W/m* o C;
• Slot - 0.38 W/m* o C.

The average heat capacity of a brick is about 0.92 kJ.

Warm ceramics

Warm brick is a relatively new building material. In principle, it is an improvement on the conventional ceramic block.

This type of product is much larger than usual; its dimensions can be 14 times larger than standard ones. But this does not greatly affect the overall weight of the structure.

Thermal insulation properties are almost 2 times better compared to ceramic bricks. The thermal conductivity coefficient is approximately 0.15 W/m* o C.

A block of warm ceramics has many small voids in the form of vertical channels. And as mentioned above, the more air in the material, the higher the thermal insulation properties of this building material. Heat loss can occur mainly on internal partitions or in masonry joints.

Summary

We hope our article will help you understand the large number of physical parameters of bricks and choose the most suitable option for yourself in all respects! And the video in this article will provide additional information on this topic, watch.

klademkirpich.ru

To heat any material with mass m from temperature t start to temperature t end, you will need to spend a certain amount of thermal energy Q, which will be proportional to the mass and temperature difference ΔT (t end -t start). Therefore, the heat capacity formula will look like this: Q = c*m*ΔТ, where c is the heat capacity coefficient (specific value). It can be calculated using the formula: c = Q/(m* ΔТ) (kcal/(kg* °C)).

Table 1

Brick has a high heat capacity, so it is ideal for building houses and constructing stoves.

What should the walls of a private house be like in order to comply with building codes? The answer to this question has several nuances. To understand them, an example will be given of the heat capacity of the 2 most popular building materials: concrete and wood. The heat capacity of concrete is 0.84 kJ/(kg*°C), and that of wood is 2.3 kJ/(kg*°C).

At first glance, you might think that wood is a more heat-intensive material than concrete. This is true, because wood contains almost 3 times more thermal energy than concrete. To heat 1 kg of wood you need to spend 2.3 kJ of thermal energy, but when cooling it will also release 2.3 kJ into space. At the same time, 1 kg of concrete structure can accumulate and, accordingly, release only 0.84 kJ.

Tree

Brick

You may be interested in: drilling a water well in Kaluga: the cost is reasonable

opt-stroy.net

Definition and formula of heat capacity

Each substance, to one degree or another, is capable of absorbing, storing and retaining thermal energy. To describe this process, the concept of heat capacity was introduced, which is the property of a material to absorb thermal energy when heating the surrounding air.

To heat any material with mass m from temperature t start to temperature t end, you will need to spend a certain amount of thermal energy Q, which will be proportional to the mass and temperature difference ΔT (t end -t start). Therefore, the heat capacity formula will look like this: Q = c*m*ΔT, where c is the heat capacity coefficient (specific value). It can be calculated using the formula: c = Q/(m* ΔТ) (kcal/(kg* °C)).

Conventionally assuming that the mass of the substance is 1 kg, and ΔТ = 1°C, we can obtain that c = Q (kcal). This means that the specific heat capacity is equal to the amount of thermal energy that is expended to heat a material weighing 1 kg by 1°C.

Using heat capacity in practice

Building materials with high heat capacity are used for the construction of heat-resistant structures. This is very important for private houses in which people live permanently. The fact is that such structures allow you to store (accumulate) heat, thanks to which the house maintains a comfortable temperature for quite a long time. First, the heating device heats the air and the walls, after which the walls themselves warm the air. This allows you to save money on heating and make your stay more comfortable. For a house in which people live periodically (for example, on weekends), the high thermal capacity of the building material will have the opposite effect: such a building will be quite difficult to heat quickly.

The heat capacity values ​​of building materials are given in SNiP II-3-79. Below is a table of the main building materials and their specific heat capacity values.

Table 1

Speaking about heat capacity, it should be noted that heating stoves are recommended to be built from brick, since the value of its heat capacity is quite high. This allows you to use the stove as a kind of heat accumulator. Heat accumulators in heating systems (especially in water heating systems) are used more and more every year. Such devices are convenient because they only need to be heated well once with the intense fire of a solid fuel boiler, after which they will heat your home for a whole day or even more. This will significantly save your budget.

Heat capacity of building materials

What should the walls of a private house be like in order to comply with building codes? The answer to this question has several nuances. To understand them, an example will be given of the heat capacity of the 2 most popular building materials: concrete and wood. The heat capacity of concrete is 0.84 kJ/(kg*°C), and that of wood is 2.3 kJ/(kg*°C).

At first glance, you might think that wood is a more heat-intensive material than concrete. This is true, because wood contains almost 3 times more thermal energy than concrete. To heat 1 kg of wood you need to spend 2.3 kJ of thermal energy, but when cooling it will also release 2.3 kJ into space. At the same time, 1 kg of concrete structure can accumulate and, accordingly, release only 0.84 kJ.

But don't rush to conclusions. For example, you need to find out what heat capacity 1 m 2 of concrete and wooden walls 30 cm thick will have. To do this, you first need to calculate the weight of such structures. 1 m2 of this concrete wall will weigh: 2300 kg/m3 * 0.3 m3 = 690 kg. 1 m 2 of wooden wall will weigh: 500 kg/m 3 * 0.3 m 3 = 150 kg.

• for a concrete wall: 0.84*690*22 = 12751 kJ;
• for a wooden structure: 2.3*150*22 = 7590 kJ.

From the obtained result we can conclude that 1 m 3 of wood will accumulate heat almost 2 times less than concrete. An intermediate material in terms of heat capacity between concrete and wood is brickwork, a unit volume of which under the same conditions will contain 9199 kJ of thermal energy. At the same time, aerated concrete, as a building material, will contain only 3326 kJ, which will be significantly less than wood. However, in practice, the thickness of a wooden structure can be 15-20 cm, when aerated concrete can be laid in several rows, significantly increasing the specific heat capacity of the wall.

Use of various materials in construction

Tree

For comfortable living in a home, it is very important that the material has high heat capacity and low thermal conductivity.

In this regard, wood is the best option for houses not only for permanent but also for temporary residence. A wooden building that is not heated for a long time will respond well to changes in air temperature. Therefore, heating of such a building will occur quickly and efficiently.

Coniferous species are mainly used in construction: pine, spruce, cedar, fir. In terms of price-quality ratio, the best option is pine. Whatever you choose to design a wooden house, you need to consider the following rule: the thicker the walls, the better. However, here you also need to take into account your financial capabilities, since with an increase in the thickness of the timber, its cost will increase significantly.

Brick

This building material has always been a symbol of stability and strength. The brick has good strength and resistance to negative environmental influences. However, if we take into account the fact that brick walls are mainly constructed with a thickness of 51 and 64 cm, then in order to create good thermal insulation they additionally need to be covered with a layer of thermal insulation material. Brick houses are great for permanent residence. Once heated, such structures are capable of releasing the heat accumulated in them into space for a long time.

When choosing a material for building a house, you should take into account not only its thermal conductivity and heat capacity, but also how often people will live in such a house. The right choice will allow you to maintain coziness and comfort in your home throughout the year.

ostroymaterialah.ru

Heat capacity of brick