How to dye white fur at home. Caring for dyed fur

If you want to dye arctic fox fur, you don’t have to take it to specialists. You can do any procedure at home. Coloring can be done with ordinary hair dye. Several packages of paint are required. The Arctic fox is able to retain color very well. Be sure to try all cleaning and dyeing procedures on a small piece of fur to know how the fur will change.

However, if the fur is very dirty, it should be cleaned with an alkaline solution. Coloring matter does not penetrate well into the structure of dirty or oily hair. Cleaning solutions are prepared by adding salt, ammonia, detergent, baking soda, water. Everything is applied to the fur with a brush. The fur is washed and dried naturally.

It should be noted that the skin from the underside of the fur - the mezdra - is pre-treated with fatty creams or glycerin so that it does not dry out. It's also very simple procedure. How to paint a high-quality fox collar? It is recommended to dye fur in the most dark color than natural. Before painting, more light color, fur must be bleached using hydrogen peroxide.

Dye the fur using regular hair dye. Apply paint quickly. Before the procedure, you can moisten the fur with water so that the paint is distributed evenly. It is necessary to work with gloves so that you can rub the paint with your hands and avoid unpainted areas. Keep for time as indicated on the box, taking into account the color. After this, rinse the fur in warm water and add vinegar. Dry gently with a towel.

Dry your fur naturally. The fur sometimes shrinks after dyeing. For this reason, carefully stretch it, so as not to tear it, on some surfaces with the fur facing up, pinning it with a pin. It takes a long time for the flesh to dry. When choosing a dye for fur, purchase only those shades that are darker than those in which the fur of the item is already dyed.

If the fur is white or beige colour, then it can be painted in a variety of shades. If the fur is dark, you can only dye it the darkest color. How to paint a collar correctly? Fur products can only be dyed in a barrel made of of stainless steel or in a special plastic tank using a tinting agent or oxidizing dye.

The easiest way is to dye an arctic fox collar with an oxidizing dye, since it is inexpensive and allows you to dye the fur at a lower temperature, ultimately giving a gorgeous shine. If the fur is old, it may not withstand the procedure. As already mentioned, dirty and soiled fur items are difficult to paint.

Dyeing fur with hair dye at home is now widespread. The fur of mink, khanorika, kolinsky, marten, muskrat and other animals can be painted with durable household cream paints. Currently, there are a large number of different cream paints on the market, prices range from several hundred to tens of rubles.

To dye fur, it is advisable to choose a paint that is not expensive, lightfast and resistant to aquatic environment. It is very convenient to paint small skins, pieces and ready-made fur caps for hats with such paints. One or two packs are required for one skin, depending on the size of the fur and the fur. Paint consists of the contents of two tubes: a tube of paint and a tube of oxidizing agent (peroxide). After mixing the contents of two tubes in a separate container, the paint is applied as a spread and rubbed into the fur with a swab.

When dyeing fur with oxidizing or acidic dyes, many inconveniences arise. For example, when painting with oxidizing dyes, it is not advisable to paint one or two skins or a sewn fur cap for a hat, since several components are required: black urzol for fur D, pyrocatechin or resorcinol, ammonia 25%, salt and oxidizing agent (perhydrol 30%). Before painting, the fur must be etched in a chromium paint in an acidic environment. The etching and painting processes are lengthy and take up almost the entire daylight hours; painting is carried out using the dip method in separate baths at a temperature of 35 -38 degrees.

When dyeing fur with acid dyes, the skins must be tanned with an increased amount of chrome tanning agent so that the skins do not cook. The temperature of the dye solution is 60 - 65 degrees.

It is not advisable to dye fur in small quantities; it is more economical to prepare a batch of skins and spend the entire daylight hours on dyeing.

When dyeing fur with hair dyes, everything is much simpler; you can dye one or two skins in 1 - 2 hours, using a spread method, rubbing the dye into the fur. This wastes one or two packs of paint. The costs are small.

What hair dyes can you use?

From large quantity When using household cream paints, you need to choose paints that provide the dyed fur with good resistance to light, water and mechanical stress. When painting mink fur, depending on whether the fur is old or new, the paint consumption is small. If we need to dye skins with long-haired fur (arctic fox, fox, silver fox or sable), paint consumption increases significantly, especially when dyeing light skins in dark colors and new fur. In this case, the issue of price is acute.

For dyeing mink, muskrat and other fur skins, the following stable household cream hair dyes have proven themselves to be effective: FARA, IMPRESION +, PRESTIGE. Dyed items retain their color for 2–3 years, are not washed off with water, and are almost indistinguishable in color from natural, undyed skins.
Paints Fara, Impression, Prestige

Selection of shades for different fur colors

You need to dye the fur in a tone that will be an order of magnitude darker than the existing one. For example, if you need to dye brown mink fur, be sure to use a darker dye. FARA paint – dark brown No. 502 is suitable for natural brown mink. Mink fur, like any other, is dyed differently. New fur that has not been exposed sun exposure(new skins), it paints very poorly, you have to increase the concentration of paint by adding a darker one.

So, for example: you can add half a tube of black paint No. 501 to dark brown paint FARA No. 502. You can increase the concentration even more by adding half a tube of dark brown paint No. 502 to a tube of black No. 501.

New mink or muskrat fur does not dye well, so often after drying it has to be re-dyed in the same way to achieve dark shades. Old (worn) fur of mink, muskrat and other animals, which has been exposed to sunlight, dyes much better and the longer the fur is worn, the more intense the color. Within 30 minutes to an hour, the skin is completely painted with dark brown FARA dye No. 502 or No. 501.
Tinted shampoo IRIDA

Light tones of fur, for example: gray or blue mink, are better tinted in the same tone with hair dye - IRIDA. For yellow or white mink it is also better to choose paint to match. After dyeing, the fur is renewed, the color becomes brighter and more saturated. Light new skins are difficult to dye in dark tones; it is often necessary to repaint them, increasing the concentration according to the method described above. There are no such problems with old light fur; it can be easily dyed black or Brown color.

It is better to tint long-haired fur (arctic fox, fox) in a natural color, choosing paint according to color. When painting in dark colors, and even when the skins are new, much more paint is used.

Preparing the product for painting

Fur skins, individual pieces or a finished sewn fur cap for a hat need to be prepared for painting. Fur pelts must first be tested for exposure to water. Fur, before dyeing, must be degreased and cleaned of dirt by washing. Then it is thoroughly washed in water, dyed, washed and washed again. Skins, due to long-term storage or socks, new skins due to improper dressing may lose their strength and, when exposed to water, swell and tear. That's why all skins need to be tested for water before painting. Separate pieces or thin places of the skin are soaked or thrown into a bowl with warm water and observed for 10 - 15 minutes; if nothing happens to the skins, they remain strong, such skins can be dyed. It happens the other way around: the skins swell, tear when stretched a little, and even worse, become limp, like blotting paper. Such skins must be discarded, otherwise big problems will arise.

Before painting, defects on the skins are eliminated: bald spots, worn out and moth-eaten areas, bites and tears. These places are cut out in the shape of a fish, inserts are sewn in, or simply cut out and stitched. Weak skins, especially at seams, are strengthened by gluing strips of nonwoven fabric spunbond or non-woven fabric, glue MOMENT 1. Glue MOMENT 1 is ideal for skins.

The process of dyeing natural fur with hair dye

Before dyeing, a fur skin or a fur cap for a hat, which you have cut out and sewn from whole skins or worn fur (an old hat or collar), must be degreased by washing, since oily and dirty hair does not dye well. Unpainted areas and stains appear.

Prepare water in a cup room temperature, add washing powder in small quantities and wash carefully. The skins should already be tested for water, as sometimes the skins swell and tear from water. To prevent the skins from tearing, wash them without sudden movements and try not to twist them when squeezing. After washing, the skin is rinsed in a clean warm water, lightly squeeze and prepare for painting.
Paint preparation process

The paint is prepared according to the instructions included in the box. Squeeze the hair dye and oxidizing agent (peroxide) out of the tube into a separate bowl and mix everything well. The paint is spread onto the skin or a sewn fur cap using a sponge and rubbed into the fur. The skin is rolled up and placed in a cup. After 10 - 15 minutes they come up and rub the paint well into the fur again. They constantly watch how the skin is dyed. After half an hour, darkening of the fur appears (if the mink is dyed brown), the longer the dyeing, the darker the color. Worn fur dyes faster.

At the end of painting, the skin is rinsed in clean warm water, and then washed with powder in warm water, rinsed several times until clean water. The skin is wrapped in a towel and gently squeezed without twisting, so as not to tear. Then the skin needs to be dried.

How to dry fur properly

To dry dyed fur, you need to use a hair dryer; it is best and more effective to use an old-style vacuum cleaner with reverse draft. Under the influence of an air stream, the fur quickly dries and fluffs up. If these are new skins and not cut along the belly, they can be pulled over the rules with the fur outward and dried. The cut ones are stretched with nails on the shield with the fur facing out, after drying they are removed and crumpled. Such dyed skins can later be used to sew new hats or repair fur coats. Finished sewn and dyed fur caps for hats made by molding are dried with an air stream and, half-baked, pulled onto the block.

During repairs mink coats Sometimes you have to tint brown fur right on the coats. The paint is rubbed with a swab into the faded area, after painting it is quickly washed off with water and dried with an air stream.

A little about secrets...

When making fur hats using the mold method, when sewing fur caps, sometimes it is necessary to insert light fur. After dyeing, pulling a fur cap over the block and drying, it turns out that light fur has a different color. In this case, you can tint the skin directly on the deck by removing the nails. High concentration paint is applied a second time to the unpainted area. After dyeing, the paint is washed off and the fur is quickly dried with an air stream.

As a result of prolonged wear and strong exposure to sunlight, mink fur becomes hard to the touch; such fur must be checked before cutting. A piece of such fur is dyed separately, after drying the fur is dyed disgustingly, the ends of the hair turn grey, the color is very bad. Sometimes, in a hurry, such fur appears on the finished cap, then you need to cut out this piece and replace it with a good one.

Often relying on the quality of the skin, it turns out that after dyeing the skin begins to tear. You can get out of this situation, pull the dried cap onto the finished block and glue the entire cap with pieces of spunbond using MOMENT 1 glue. When pulled onto the finished block, the skin will no longer tear.

When sewing a fur cap for a hat made by molding, you need to remember that the skins decrease in size after dyeing and drying, so the cap is cut out larger in the beat.

Other dyeing methods

Fur can be dyed in many ways. For these purposes, there are oxidative, direct, active, acidic and a whole range of dyes, including natural preparations. When painting, the dipping method is mainly used and, less often, the spreading method. All these methods are labor-intensive and require, in addition to the use of basic dyes, a whole range of additional preparations.

When dyeing fur at home, it takes all daylight hours. A finished fur product (hat, fur coat, vest) cannot be dyed using the dip method; the fur skin must be separated from lining material, and when painting, shrinkage of the skins is possible; the skins decrease in size when drying. You can tint some defective areas (worn or faded), for example, on a fur coat or hat, by rubbing the paint into the fur using a spread method, and then quickly rinse with water and dry. With this method, household cream hair dyes have proven themselves to be excellent. Sometimes like this problem areas tinted with aerosols by spraying paint.

Spray for coloring fur

Often finished fur products (hats, fur coats) look excellent when worn for a long time, but faded spots appear in some places. In this case, there is no need to paint the entire thing; it is enough to touch up the problem areas with a spray.

To dye fur, you can use aerosol paint for caring for suede. It consists of metal cans of spray paint.
Aerosol for suede care

You need to choose the right one desired shade, otherwise the dyed fur will differ sharply from the main one. The area that needs to be tinted is cleaned of dirt and can be degreased with alcohol and wiped with a swab. It is advisable to cover the fur with any material, except for tinted spots. We spray the paint at a distance of 30 -40 cm so that the fur does not stick together and a uniform color is obtained. In this way you can get excellent result, the painted areas will not differ much from natural fur, the paint will last for several months.

Caring for dyed fur

As a result of painting fur skins, individual pieces, fur caps for hats with persistent household cream hair dyes, carried out using the spread method, by rubbing the paint into the fur, we obtain a stable color. Dye long time When worn, the fur is resistant to light, water and mechanical stress. Special care such things do not require, the same requirements as for any fur product.

The requirements for fur dyed by spraying are completely different. The color is not particularly durable, so it is better to protect such a product from the influence of light, water, mechanical stress and elevated temperature.

In order for the dye to stick better and the fur to shine, it can be treated with a special balm for the care of dyed hair. After this treatment, the fur becomes softer and fluffier.

Fur products require daily care, comb more often, require thorough cleaning. Much depends on proper storage. Fur should be covered and stored in a dark place.

A brand new mink fur coat or hat looks very attractive, but if you wear the item for several seasons, the fur will lose its luster and its color will fade. If conventional cleaning methods are powerless, then it’s time to paint the mink. But how to do that?

Caution and accuracy!

The best option is to use the services of professionals, since dyeing fur is a labor-intensive and responsible process. When dyeing mink fur at home, there is always a risk of hopelessly ruining the item.

Well, if you are ready to take a risk, then experiment first with a piece of fur, which is always attached to any mink product. This, of course, will take time, but you will gain some confidence that you will not ruin an expensive item (or be convinced of the opposite).

Methods for dyeing mink fur

Nowadays you can buy special sprays for dyeing fur in the store. They make it possible to quickly and without much hassle return things to their original appearance, but at the same time, they have a number of disadvantages: in particular, any light-colored item in contact with your fur coat will acquire its color, and the color of the fur coat itself will fade again after a few months.

A more lasting result is obtained by using hair dye: after all, the structure of mink fur is similar to the structure of human hair. But you will need good drug from a reliable manufacturer, only in this case the coloring will be successful. As for the shade, it is better to choose a paint that is a tone darker than the natural color of the fur.

It is imperative to pre-clean the fur, otherwise the fat and dirt on it will not allow the pigment to penetrate deep into the pile, and the painting result will be unstable. Degreasing can be done using sawdust or potato starch, which is simply poured onto the surface of the product and then shaken off.

Next, you should treat the back side of the flesh with any fatty cream, which will prevent it from drying out. Now you can start preparing the composition, following the instructions that you will definitely find in the paint box.

Using a brush or toothbrush, evenly apply the prepared solution to slightly damp fur (use a spray bottle to moisten), and then use gloved hands to cover its entire surface so that no unpainted areas remain. We lay the fur in the direction of hair growth and wait: the exposure time of the coloring composition is about 3 hours.

Next, under warm water the paint is removed using shampoo, the fur is treated with hair balm, thoroughly washed and rinsed in a vinegar solution (a tablespoon per liter of water). Now all that remains is to carefully remove the remaining moisture with a soft towel and apply again to the inner area thin layer glycerin or any fatty cream.

Keep in mind that after painting the skin may shrink, so while drying, the skin must be pinned to a flat, solid base with thumbtacks. Fur should be dried at room temperature. If everything is done correctly, after drying your mink should remain just as soft and fluffy, but acquire a more attractive, intense color.

In order for the paint to apply evenly and reliably color the fur, the product must be prepared for painting. To do this, the fur surface must be cleaned of grease and dirt using special means.

Before painting it is necessary to prepare the fur

To clean you need:

1. Before that, you need to prepare an alkaline solution of ammonia, salt, soda and dishwashing detergent (you can use washing powder).
2. The resulting slurry must be spread in an even layer on the surface to be treated using a clothes brush.
3. After some time, rinse off the product with running water.

An alternative cleaning solution can be a liquid made from alcohol, vinegar and water, which is applied in the same way as the first option.

Such cleaning products are suitable for processing the fur of arctic fox, mink, silver fox and rabbit.

Typically, standard hair dye is used to refresh the Arctic fox. The fur is quite dense, and therefore you will need several packages to ensure that the resulting color is rich and uniform.

Use hair dye

In this case, you need to choose a paint one or two shades darker than the original. This will avoid unpainted areas and make the item brighter.

Before covering the entire area with paint, you should try to treat small area. This will allow you to see how the color changes under the influence of chemicals.

Before full dyeing, check how the fur reacts to the dye.

In case of color fading (especially the tips of the pile), it is better not to dye the fur, but to lighten it. The main thing in this procedure is to choose the right composition for coloring. For this purpose, hydrogen peroxide and ammonia, taken in different proportions.

Tinted hair balm is an alternative to permanent dye.

Toning with tint balms

It will help gently color the pile, providing necessary care fur products. However, this method of solving the problem is not durable, since the balm is gradually washed off when precipitation occurs in the form of snow and rain, and can also contaminate light-colored items located in close proximity to the fur.

Items made from arctic fox fur often lose their attractiveness due to yellowing of the ends of the pile. In this case, there is no need to paint the entire product. It is enough to use an aerosol can to treat suede.

Aerosol spray for painting

Before you dye arctic fox fur at home, you need to choose a suitable shade and spray it on the surface at a distance of about 70cm. To prevent the pile from sticking together, you need to constantly move the can. After applying the paint, the fur should be combed with a special brush for suede. Moreover, this must be done immediately.

In specialized stores, it is fashionable to purchase special paint in cans for caring for fur. With their help, you can quickly update the shade, making the product brighter.

Professional paint for fur

However, it also has some disadvantages: when it comes into contact with white items or a light fur coat, the dye can be transferred to lighter items. And the color itself will lose its shine and brightness within a few months.

Since mink products are considered quite expensive, dyeing of such fur should be done as delicately as possible.

Before that, you need to check the degree of contamination of the pile. A regular hairdryer will do for this. The air stream should be directed at the pile: if the fibers fall apart, cleaning is unnecessary. However, if the lint moves from one side to the other and clumps together, cleaning may be necessary.

Mink fur is dyed with hair dye

Step by step procedure

The sequence of actions in both cases is identical:

1. To start painting, you need to put on gloves and take a brush. After this, apply paint to the surface and smear it so that there are no bright spots left.
2. After waiting the time indicated on the packaging of the product, the product should be rinsed with water at room temperature and vinegar. To fix the pigments and make the pile shiny and soft, you need to use the balm that comes with the paint.
3. Then it needs to be washed off and dried.

1. Only a cleaned product can be dyed so that dirt and grease do not prevent the pigment from penetrating into the villi.
2. When preparing a product for dyeing, the underside of the leather should be covered with cream (or Vaseline) to prevent the surface from drying out.
3. Fur can only be dyed if it is not too old. Otherwise, it may be damaged during color change. In addition, the risk of mechanical damage to the product will increase significantly.
4. You should choose a dye tone darker than the natural pile. This will help hide minor defects skins and will give a natural shade.
5. To renew fox fur, you can use a solution of manganese, diluted to a dark brown tint. You need to apply it to the pile with a sponge, without touching the inner layer (skin). If you neglect to be careful, you can damage the base of the fur, which will lead to rapid wear of the item.
6. Since the skins may shrink after dyeing, you need to place the product on a flat surface and secure it before applying the dye using pins or thin nails.

By using some fur care tricks, you can provide an attractive appearance to the product and extend its wear life.

Dear Clients

Prepayment for sewing products is not less than 50% of the cost of work.

The Lynx factory also offers Additional services, such as: painting, cutting and hauling.

Dye furs are produced in different colors. We dye both individual skins and finished goods made of fur (we don’t paint sheepskin coats) .

When painting finished fur products, be careful. Paint happens without fabric lining, only skins are dyed. Before painting, you are checked to see if it can be painted.

If you wish, you can check it yourself : Take your fur item that you want to dye, lightly peel off the lining and wet the skin well. After this, forcefully pull the soaked skin into different sides, if the skin is torn, it means that low-quality workmanship was used in sewing and when painting your product may fall apart - paint it IT IS FORBIDDEN, if the skin easily stretches to the sides - paint CAN .

We warn you in advance that when sewing a fur product, many companies often stretch the skin to make it larger, such things after painting I can shrink up to 30% .

Painting of fur products

SHEEPSKIN COATS, SHEEPSKIN (NOT SHEARED) AND LEATHER - WE DO NOT DYE!

• Painting time 2 weeks
• Shrinkage of a fur product during painting 30% (1 size)
• Shrinkage during dyeing always occurs and the product shrinks unevenly
• It is necessary to restore (restore) the product after dyeing Necessarily!

  Restoration of products after dyeing
  

  Size	In Malakhovka
  Vest	10,000 rub.
  Jacket (length up to 65 cm)	from 15,000 to 18,000 rub.
  Short fur coat (length up to 90 cm)	from 18,000 to 20,000 rub.
  Short fur coat (up to 105 cm)	from 20,000 to 23,000 rub.
  Long fur coat (from 110 cm)	25,000 rub.
  Cover with new lining	25,000 rub.
  Flare (depending on the length of the product)	from 10 - 30%
  Hood	2,000 rub.

  Prices do not include the cost of the stock (up to size 50)

  A little history about dyeing coats, fur and skins

  Animal fur has been necessary for humanity throughout the history of its existence. And today, fur remains a valuable and commercially viable product, because it is used not only for warmth, but also for decoration and, undoubtedly, is a luxury item.

  The skins of fur-bearing animals consist of a dense undercoat and longer, stiffer hairs that rise above this layer. The main function of the undercoat is to maintain the animal's body temperature, and the longer guard hair is to protect the skin during rain or snow. Fur pelts are mainly sold at auction. Most production companies specializing in sewing products using fur or brokers buy them out. The largest auction centers are located in New York, Montreal and St. Petersburg.

  In the modern fur industry, fur is used for sewing or decorating outerwear. Often, in order for the finishing color to go well with the color of the main material of the product, it is used fur dyeing in different tones. High quality dressing and dyeing fur is very important, because this will determine how long the product made from it will last. Many people are interested in the question: is it possible dye the fur so that it does not lose its quality? Certainly! Moreover, if painting skins was produced in compliance necessary technology, fur can last longer. That's how paint natural fur Only professionals know how to ensure that the skins remain soft and elastic. Sometimes the fur, on the contrary, is bleached or this method is used dyeing natural fur, in which only longer hairs are shaded. This is exactly what happens in some cases silver fox fur dyeing. Same method can you dye arctic fox fur and give the product a very original look. When sewing a mink coat or coat, it is also advisable dyeing fur or mink coat in one color, if there are skins that are identical in softness, length of pile and density of the undercoat, but initially different in color.

  Selecting skins for a product is not an easy task and requires a lot of furrier experience. The advantage of fur material is that, if necessary, you can replace pieces with defects with others that are ideal for the main raw material. In such cases it may also be necessary dye mink fur, arctic fox or other fur-bearing animal to match the color of the skins that were selected for the product. Give fresh look a coat or fur coat that has been worn for several years, perhaps if dye old fur into a different, more saturated shade. A competent selection of fur makes the fur coat look like it was sewn from one large skin, without focusing on the joining of different fragments.

  Information about where can you dye fur, now it won’t be difficult to find. It is important to turn to professionals, because such material is quite expensive and requires a special approach. Usually these are special workshops or fur dyeing studio. Such organizations have special equipment and, most importantly, extensive experience in working with different types fur, so you should have no doubts, where to dye real fur .

  Fur skins can be dyed different ways. The main ones are namazny, okunochny or combined. In each individual case, the most optimal of them is used.

  Where to dye fur in Moscow can be found out from various sources. It should be taken into account that this procedure is quite expensive and only a high-quality service can guarantee a good result and not disappoint. Therefore, trust only verified sources , in such a non-standard type of service as fur dyeing in Moscow . Fur dyeing price will depend on several factors: the painting method and the used chemicals, (size, length, style) if this is a product.

  Examples of fur and skin dyeing work