Why you can't glue vinyl wallpaper. How to glue vinyl wallpaper? We glue vinyl wallpaper in problem areas

Now is the time to change the decor in your apartment or create comfort in a new home.

You have chosen for wall decoration vinyl wallpapers, but don’t know how to glue them?

Then it’s time to figure out what tools are needed for this and how to do it correctly at home.

What you need to know when choosing vinyl wallpaper

Before you start gluing, you need to decide what kind of wallpaper you want to hang in a particular room, since there are several types and varieties.

• For some, non-woven fabric serves as the basis, for others - paper.
• Vinyl wallpapers are also divided into subtypes based on production technology:

foam, flat, silkscreen, polyfoam and rigid vinyl, or as they are called washable.

As for their safety in the house where we live - think for yourself, the material from which they are made is PVC, these are the same plastic windows, linoleum, suspended ceilings.

I would not recommend gluing them in children's rooms, and carefully choosing a manufacturer that guarantees quality and environmental friendliness.

To know how to glue vinyl wallpaper with your own hands, you will have to collect a small set of tools (they are not specific and can be found in any household) and acquire some skills, which I will describe in detail in this article.

Tools for work

So, let's start with the tool that we will need in the process of wallpapering.

1. Large roller for removing air bubbles and excess glue.
2. Small roller for seams.
3. The brush is large and small.
4. Wallpaper knife.
5. Plumb.
6. Pencil.
7. Roulette.
8. Scissors.
9. Rags.
10. Putty knife.

When everything you need is collected, let's start preparatory work.

How to prepare walls for proper vinyl wallpapering

The first thing to do is remove old paint and the pieces are not removed wallpaper and peeling putty. After this, we prime the walls and fill the cracks with putty.

When everything is dry, prime the walls with a primer or wallpaper glue, in the proportion that you will find on the box of glue. Typically the ratio is 1:8 (glue:water). A primed wall will absorb less glue and the wallpaper will adhere more firmly.

Preparing materials for work

First of all, prepare the glue according to the manufacturer's instructions.

We take into account that no matter what glue you use, no matter how you prepare it, you will need 45 grams of ready-made solution for 1 m² of vinyl wallpaper.

Pasting vinyl wallpaper

How could it be without special effort glue wallpaper, namely vinyl?

Firstly, there are several types of vinyl wallpaper, and the choice of adhesive and method of its application depend on their type, and the manufacturer usually indicates this information on the wallpaper packaging in the form of icons.

• There are wallpapers that are glued dry, these are vinyl wallpapers with a non-woven backing, in this case the glue is applied only to the wall.
• Otherwise, the wallpaper goes to paper based, then glue is applied to the wall and to the panel, which, with the glue applied, is folded with the edges towards the middle, for better impregnation glue.

Step-by-step instructions for wallpapering

Before you start gluing, exclude any drafts in the room until the wallpaper is completely dry, otherwise they will decorate your floor until the morning!

1. Before starting pasting, on the wall, using a plumb line and a ruler, we mark a line along which we will align the edge of the first panel. This is best done together, since only a specialist with extensive experience can independently create a straight line.
2. Next, we take a piece of vinyl wallpaper and apply it to the wall under the ceiling, bending the upper edge of the piece by 5-10 cm, and align the side edge along the drawn line.
3. We smooth a section of wallpaper from the ceiling to the floor, and to the sides from the center with a rubber roller, carefully removing air. Try not to stretch the wallpaper, as it will shrink back when dry and create a gap at the joints.
4. When gluing the next panel of vinyl wallpaper, try to join the edges of the panels as much as possible and carefully roll the joints of the seams with a rubber roller, after removing excess glue with a dry rag.

Pasting the corner

When we reach the corner, measure the distance from the edge of the glued wallpaper to the corner and add an overlap of 2 cm, cut off such a strip from the whole panel. We glue this strip with an overlap at the corner.

We glue the next panel overlapping into the very corner. Next we glue strips of vinyl wallpaper along old scheme- butt.

Secrets of professional vinyl wallpaper gluing

If you remember, when preparing the wallpaper panels, we made overlaps under the ceiling and on the floor. Be sure to trim these overlaps using a spatula and stationery knife under the ceiling and near the floor.

We change the blade of the knife according to the degree of its dullness - do not skimp on this, otherwise the knife will simply tear the wallpaper.

Before gluing, switches and sockets must be removed, the electricity must be turned off to avoid electric shock, and the wallpaper must be glued on top of them. We cut out the holes for them when the wallpaper is dry and then we install everything in place.

In principle, this is probably all you need to know in order to cover a room with vinyl wallpaper correctly.

Good luck to everyone in this simple matter!

4259 0 4

How to glue vinyl wallpaper: independent work from A to Z"

Vinyl samples have earned popularity for their beauty, durability, easy care and quick gluing. And the question of how to glue vinyl wallpaper can be solved effectively. How to do this with your own hands efficiently and quickly? Why this particular type of painting? This is what my article is about!

I chose vinyl material because:

1. Such canvases are indispensable in damp rooms.
2. If you stick them on uneven walls, then these defects will become invisible.
3. Caring for vinyl is easy.
4. Durability is high.
5. There are samples of any type: from imitation stone to silk-screen printing.

Convinced you of your choice? Now all that remains is to decide on the texture and color, and prepare for pasting with your own hands. Remember, moving towards a goal begins with preparation. So:

Preparing for work

Calculation of material consumption and preparation of walls is the first stage of repair.

Calculation required quantity I do this:

• I determine the height to the ceiling from the floor baseboard;
• I measure the length of all walls;
• I multiply this amount by the height;
• subtract the area of ​​window and door openings;
• I divide the total by the area of ​​1 roll.

You should always buy more material so that the pasting ensures the pattern matches. To do this, I determine the distance between it: if it is 10 cm, then I add 5 cm to the strip. In this case, each roll should be checked for shade matching. An extra strip will help with minor repairs: if, for example, a cat tears the material.

The instructions on the roll indicate what kind of glue is needed for this particular type of wallpaper.

Walls with wallpaper

So, foamed vinyl is popular because it masks wall defects. This will make it easier to prepare them before gluing the vinyl sheets.

First, I got rid of the old finish: I cleaned off both the paint and the crumbling plaster. It is easier to glue the sheets onto drywall: it is initially smooth and does not require tedious leveling (if the seams are puttied). After all, wall curvatures of more than 1 cm must be leveled!

Then you need to turn off the electricity for the entire time of pasting and remove sockets and switches so as not to interfere.

Let's move on to next stage— let’s find out how to cover walls with vinyl wallpaper.

We work with non-woven base

Finishing with this type is also available to beginners, because the interlining does not get wet and therefore does not shrink when the glue dries.

The level (plumb line) will give the vertical where we want to glue the first canvas.

Preparation of glue

Wallpaper glue usually comes with instructions. By the way, saving on mortar often spoils expensive repairs. So which glue is better? I chose from expensive ones, special for vinyl, heavy materials.

The proportions of the ratio of water and powder strictly correspond to the instructions:

• Pour the powder with a small amount of water.
• Stir the mixture for 3 minutes with a regular mixer (I don’t have special attachments for a drill). This home appliances coped with the task perfectly - crushed all the lumps.
• Next you need to add required amount water and stir the suspension with a wooden spatula.
• Then leave the solution to swell for the time specified by the manufacturer.

Gluing stripes

• You only need to cover the wall with glue and leave the canvas dry. So, the question of whether the wallpaper needs to be coated with glue is answered negatively for a non-woven base. This means that the process is less labor-intensive, and we also save glue.

Beginners should not rush into work. I recommend doing everything carefully, because the solution that has slightly dried out on the wall can be refreshed, and the unevenly placed canvas can be torn off and glued again.

• We coat only a strip of the wall for the first canvas. For the corners, we also use glue to mark the edges of the non-woven base so that the wallpaper holds more firmly.

• You need to attach the material from top to bottom, and it was more convenient with an assistant: someone glues it, and someone supports the canvas. It will be especially convenient to work with an assistant if it is meter wallpaper, because they are significantly (twice) wider than the usual half-meter samples.

• Then use a roller to smooth the canvas from the center to the edges to squeeze out excess glue and air. Often, when gluing it to the ceiling, part of the canvas comes off, which means that it needs to be coated more.

• Try to glue the canvases end-to-end so that vertical tubercles do not form at all points of their connection.

• We coat the joints with a concentrated solution, and roll the rubber over them with pressure.

• Corners are especially labor-intensive; they should be glued especially carefully and slowly.

• At corners, you can use the “into the corner” or “through the corner” technique. For example, on an overlapping 5 cm allowance of the canvas glued close to the corner, glue a strip for the second wall. Then, running a knife along this double joint, connect them.

During gluing, avoid drafts so that the material dries evenly.

Finally, trimming

When the wallpaper has dried, apply a long ruler and cut off the excess canvas with a construction knife: first at the ceiling, then at the floor. Moreover, the bottom can be run directly under the baseboard (wherever possible).

Then you need to cut holes for switches and sockets. First, crosswise from the center, then cut off the edge.

Now you can install previously removed boxes on sockets and switches that were de-energized when wallpapering.

Pasting the paper backing

The rules for gluing samples on a paper base are a little more complicated due to possible damage to the material when wet from the glue.

Among important advice In the case of how to properly glue vinyl wallpaper, there is a recommendation for priming the walls. After all, it is precisely this (especially antifungal) that is needed under vinyl on paper to ensure its durability. The non-woven base itself will protect itself from mold.

The price of wallpaper with a paper base is affordable, but their installation is more difficult: they are heavier, so they sometimes break and tear. However, the gluing is the same, and such dense samples better hide wall defects.

• We also apply glue to the canvas with a flat brush.

The absorption time is indicated on the roll by the manufacturer and should be followed with each sheet. Otherwise, one strip will stretch more strongly, the second - less, which will result in a skew.

• We start from the corner and from the top, align it vertically (a line drawn with a plumb line with a pencil), then press it in the center with a roller and along the entire length.
• We expel the air and glue, roll the edges, moving the roller to the sides from the center. You can smooth it with your hand, but it’s more effective with a roller.

• Remove any glue that has come out around the edges with a dry cloth.
• We coat the prematurely dried edges with a thin brush.

If the fabric has stretched, when it dries, a gap sometimes appears at the joint. Here we will apply glue again and lightly stretch the wet fabric, because foamed vinyl is elastic.

Vinyl wallpaper takes 2 days to dry.

You can quickly and effectively update your interior using polymer stickers. It is easier to install than a large roll cut. Such samples are especially attractive on plain walls, and even children are happy to glue them in a nursery. This wall accent is inexpensive and bright.

Let's consider whether it is possible to glue with PVA glue. This composition dries very quickly, forming folds on the wet canvas. But it can be used in problem areas- near the baseboards, radiator, under the window sill, if combined with wallpaper (1:3).

The problem of how to peel old wallpaper off the wall is simply solved. Another advantage of vinyl canvases is their ease of dismantling: they peel off with a spatula, leaving a surface ready for a new pasting.

Wallpaper with a second layer

Let's consider whether it is possible to glue vinyl wallpaper onto vinyl. At the dacha I encountered a problem: a house made of clay blocks lined with bricks. The old polymer wallpaper was glued tightly; it only came off with a layer of plaster along with clay, forming terrible brown bumps.

It's good that the covering was smooth and not made of foamed vinyl. Therefore, in the question of how to glue vinyl wallpaper onto vinyl wallpaper, I decided simply. I took the advice of the master: unevenness is invisible under the structural layer or wallpaper with small ornaments, and bought these.

Then I did everything according to the instructions outlined above. But with one amendment: the joints of the old wallpaper should not coincide with the newly pasted ones. And everything worked out. And most importantly - it lasts!

Conclusion

So, the advantages of these canvases are obvious: beauty, durability, ease of gluing, and care is a pleasure. Thanks to step by step instructions described by me, you now know how to glue vinyl wallpaper on a paper or non-woven basis. If you have a comment or question, write it in the comments! But before that, don't forget to watch the video in this article.

Vinyl wallpaper is one of the most popular types finishing of walls and ceilings. They became an excellent alternative more expensive materials. In this article we will analyze all the intricacies of gluing such a canvas, which will help you make repairs with your own hands quickly and efficiently.

Main characteristics

Vinyl wallpaper comes in paper and non-woven backing. They are made from polyvinyl, which provides high density. Thanks to this, it becomes possible to hide irregularities.

When choosing vinyl wallpaper for gluing, it is recommended to pay attention to the icons indicated on the rolls. This type It has different characteristics, and this is also worth considering when purchasing. Firstly, the technology for applying glue is different. There are types where glue must be applied to walls or wallpaper, as well as a type where it was applied during production. In the latter case, gluing will be faster and easier, and it won’t take much time and effort. Secondly, it is worth considering the humidity levels of the rooms they are selected for. The following categories are distinguished:

Surface preparation

If there is a wall old finish, then before gluing new material, you should get rid of the old one. To do this you need to wet it warm water and then, using a spatula, remove. If the surface has been painted, you will need a damp sponge and use it to remove the paint. These processes are not too complicated, the main thing is to do everything carefully.

The next step is to inspect the surface for any unevenness. If any, they should be sealed with putty or plaster mortar. The final step will be treatment with a primer and leveling with putty. For vinyl wallpaper, the wall is puttied only once and then processed sandpaper so that the surface looks as smooth as possible. After which the wall must be primed.

Nowadays you can find great amount various primers. A special adhesive has been developed for vinyl wallpaper. You can also use regular one, which will need to be diluted with water first.

After all the work has been carried out, you will need to draw a vertical line on the wall, which will help you stick the vinyl wallpaper evenly. To draw a line, use a plumb line, pencil and ruler. A plumb line is installed under the ceiling near the corner and a straight vertical line is drawn.

Since vinyl is a fairly dense material that can hide wall unevenness, before gluing it, you don’t need to apply another layer of putty, which will save you a lot of money. If you have a question when preparing the surface with your own hands in order to properly hang vinyl wallpaper, we recommend watching the following video:

Wallpapering

The technology for gluing vinyl wallpaper is practically no different from other types. Since vinyl wallpaper is quite wide, the number of joints will be minimal. First of all, using a sharp blade or a construction knife, you need to cut them into strips. The length of the strips should be equal to the height of the wall with an addition of 7 centimeters. Extra centimeters will help hide minor surface irregularities.

The next step to hang vinyl wallpaper is to apply glue. A roller will help us with this. You need to lubricate the area of ​​the wall where the wallpaper strip will be pasted. The cut material is glued from the top of the wall exactly along the line and gradually falls down. To reach the ceiling, it is better to use a stepladder or table. The wallpaper is aligned vertically, and then, using a roller, the air bubbles that remain after gluing are squeezed out. This process is very important, since it is he who guarantees the quality of the work done, so it is recommended to treat it extremely carefully.

Typically, vinyl wallpaper is glued end-to-end, but some craftsmen use the overlapping technology. The overlap is usually several centimeters in size and after applying the second sheet, a cut is made along the intersection line. This technology also has a right to life.

If the glue needs to be applied to the wallpaper itself, you will need to spread the material on the floor and coat it with an even layer. It is not recommended to use a lot of the substance, as the wallpaper may soften and lose its properties. The canvas should be well soaked, so you need to let it lie for 5-10 minutes. If glue gets on front part wallpaper, you need to quickly and carefully remove it with a dry cloth so that it does not have time to dry out.

Hanging vinyl wallpaper with your own hands is not as difficult as it seems, but if problems arise, it is better to watch the instructional video:

Wallpapering on non-woven backing

The rules for gluing vinyl wallpaper on a non-woven base are practically no different from those described above, but there are still some nuances. The glue needs to be applied only to the wall; the material itself does not need to be processed. In the corners they are glued overlapping, with an allowance of 5 centimeters. After gluing, the excess part of the canvas is cut off. Otherwise, the process is no different from paper-based vinyl wallpaper. If difficulties arise, we recommend watching a special video that will help you understand in more detail the process of gluing vinyl wallpaper on a non-woven basis with your own hands:

Let's consider some points that you will need to consider when working with vinyl wallpaper:

Results

As you can see, hanging vinyl wallpaper with your own hands is not so difficult. The main thing is to follow all the rules and instructions written in the article, and you guarantee yourself high-quality repairs without much investment. After all, you won’t need to spend money on construction team which will provide significant savings. Vinyl wallpaper will become excellent choice for almost any room. They are durable enough to withstand washing with water, so if stains occur, they can be easily removed.

Russia, Moscow region, Moscow +79041000555

How to properly glue vinyl wallpaper with your own hands?

Takes ~6 minutes to read

Progress in the field of materials presented a gift - vinyl wallpaper. The well-known PVA glue has been learned to foam and sinter on rolls of paper, while imitating surfaces various materials, including the silks of the imperial palaces. Although vinyl wallpapers have nothing to do with silk, they are often called silk-screen for their specific appearance. The vinyl is actually applied using the tinted dot printing method. After heating, the substance swells, the points merge - the process is completed. Warm stripes are sometimes embossed and rolled under paint rollers. The design can be applied before embossing. The production is not complicated, but the components used are expensive. Palace collections of vinyl trellises can hardly be called budget-friendly. However, vinyls that are properly applied to the wall will last forever.

Save

Features and types of vinyl wallpaper

Depending on the substrate, wallpapers are divided into:

• paper,
• non-woven fabric,
• fabrics.

The first ones are the cheapest, the acrylic on them is foamed, so the substance is easily destroyed even with a fingernail. Non-woven fabric is used as a substrate for denser samples. Vinyl on a fabric base is similar to a sieve, calico. Used where there is a complete imitation of tapestry.

Save

Based on density, vinyl is divided into two categories:

• high relief,
• low relief.

High-relief ones are produced in wide canvases white with the texture of matting, two-thread, linen canvas, as well as ribbons in the form of plaster decor. After gluing, such reliefs are painted with acrylic paints. For kitchens and hallways, decorative canvases are produced in the form of tiles, brickwork. The service life is limited: rearranging furniture, children, pets, the inability to wash with abrasives are the reasons for the rapid destruction of the layer.

Low-relief washable, not afraid of impacts, do not fade, without unpleasant odor. Their only drawback is the ability to condense steam on themselves. That is, they do not “breathe”. Therefore, they are recommended for rooms and premises with good ventilation.

They produce vinyl in 4 standards: 53 cm, 70 cm, 106 cm and ribbon friezes. All varieties, regardless of the height of the relief, series and manufacturer, are combined with each other. The main thing in the gluing process is to avoid gaps between the canvases. Overlapping vinyl is not glued.

How to glue: necessary tool

1. Metal ruler;
2. Stationery knife;
3. Square;
4. Roulette;
5. Flat brushes – 0.5, 2.5 cm;
6. Fleecy roller on a stick – L 200 mm;
7. Roller on the handle – L 120 mm;
8. Leveling scraper;
9. Construction level (preferably laser);
10. Simple pencil hard T;
11. Shoe brush;
12. Scissors.

Save

You will also need a fiberboard board, a table, a stepladder, rags, masking tape, and weights to prevent the canvas from curling. The glue used is methylcellulose CMC or modified starch.

Glue selection

CMC stands for: methylcellulose glue. All its other names are an advertising gimmick. CMC is poured in very small portions (dust) into a bucket of water, mixing thoroughly. Set aside for a few hours and stir again. The liquid should be viscous, like jelly, and envelop the stick without lumps. The jelly-like consistency is the same for all vinyls - heavy, light, high-relief. Very thick glue is diluted with water, but carefully, in small portions, otherwise it may become a watery liquid.

Save

Another wallpaper adhesive is modified starch. It dries without a trace and does not form whitish streaks. Its price is higher, but the preparation is the same as that of KMC.

PVA glue is added - up to 10% of the total mass - just before gluing to speed up the setting of meter-long prints, but it is not necessary. The excess is thoroughly blotted with rag swabs.

Preparatory work

Removing old wallpaper

The gloss of vinyl reveals all the unevenness of the wall, so the surface is prepared more carefully than for painting. The chalk is washed off the wall, the old wallpaper is scraped off with a spatula and a knife, after soaking it.

Sometimes you need a lot of water. An oilcloth is placed on the floor on the bars; the flowing water will be collected in an oilcloth ditch. Each time you roll a dampened roller over old wallpaper, it will peel off faster. The washed wall is allowed to dry.

To remove old wallpaper in one large layer, they resort to the following: newspapers are glued onto the old paper print. Let it dry and peel it off.

Wall leveling technology

Scrape off oil paint. Large sinks are sealed with plaster and impregnated with primer. Next - application gypsum mixture"Start". Afterwards the walls are sanded. Before the finishing layer, it is recommended to glue fiberglass canvas. Fiberglass will serve as a flavoring agent during gluing. It also reinforces the finishing layer. All fiberglass glue is the same. The final layer is “Finish” putty.

Save

By applying a light source to the wall, the dried surfaces are checked for the presence of small cuts and protrusions. After straightening, the surfaces are primed again. The final stage– sizing. The glue prepared in advance is rolled with a roller.

Very old walls are easier (and cheaper) to level with plasterboard. In this case, transverse and longitudinal guides are attached to the wall with a pitch of 1200 mm, the slabs are hung, the screw entry points and the seams are puttied. Reinforcing mesh is not applied along the seam. Finishing layer It is not necessary to apply putty mixtures to drywall, but the slabs are primed and glued in the same way as in the previous case.

Marking

Surfaces are measured. Use a level and a pencil to mark the top edge. The highest canvas height in the entire room is set (it can vary). Usually it is 2 m 65 cm +. In the case where the design involves two tiers and a frieze, markings are made along the horizons.

Save

The ceiling cornice is installed either before or after gluing. In the first case, the junction of the cornice and the canvas is covered with acrylic between two masking tapes. The top of the acrylic is tinted with water-based emulsion (it turns yellow over time). In the second case, the wallpaper protrudes 5 mm above the bottom edge of the plinth, and the top of the wallpaper is covered with polystyrene cornices, having previously been protected from contact with construction protective “painting”!

You need to mark out the entire composition in advance. Special attention– verticals. Using a level, a vertical is drawn for each canvas, otherwise a “slipped” section can initiate a crook for all subsequent ones.

Step-by-step instruction

To properly glue such wallpaper with your own hands, follow the instructions below.

Fabric preparation

The roll is rolled out, inspected for defects, and the length is cut off in accordance with the marking rectangles. You need to cut in one step, using a backing board, with a blade well secured in the handle. The transverse line for cutting must be strictly perpendicular.

Save

How to apply glue

The cut is placed on the floor, pressing the corners with weights, preventing them from twisting. The glue is rolled with a roller without squeezing in a painting tray. The vinyl lining absorbs a lot, so after the first rolling, they immediately roll it again. It is advisable to lubricate the contours of the canvas with PVA in addition to CMC. The top and bottom are brought to the center. The formed envelope is soaked for 3 – 5 minutes. Unfold it, placing it against the wall. It is advisable to use two people to avoid tearing.

Save

How to glue the finished canvas

Before gluing the finished piece of canvas, you need to pay the greatest attention to the top edge. Once it is fixed in accordance with the marking line, the canvas is finally unfolded and its center is fixed by hand. Holding the top edge, they pass over the canvas with a spatula-smoother. Subsequent movements are from the center to the edges. Excess glue is removed with a moistened rag swab, the canvas adheres perfectly. A shoe brush is used. Use it to level the canvas in a circular motion, check the side edge with the horizontal, and if necessary, move the edge back and slightly pull it up. The wet cut is elastic and stretches at a meter thickness of up to 1 cm. Do not touch the moistened wall with nails or sharp objects - it is very vulnerable.

Trimming edges

Vertical canvases cannot be trimmed on a wet wall. The groove from the knife will remain, moreover, it can provoke the destruction of the putty. But on plasterboard the canvas can be trimmed - in those places where there are no nests, under self-tapping screws, away from seams. After drying, the strips are cut close to the floor.

The tape material - friezes - after stretching along the wall, are pulled out. It is difficult to predict their final length. The tape is measured, cut to excess, laid, the border is marked with a pencil and carefully trimmed with scissors.

Pasting in problem areas

No adhesive on water based will not withstand temperature changes behind the batteries. You can’t even see behind them: the curtains camouflage you. But it is possible to choose a color and paint it over. Suitable for mother-of-pearl wallpaper acrylic paint with shine: silver, gold, bronze. These compounds are extremely stable. The edges of the vinyl of the batteries are painted with back side thick PVA glue and press down. Hold it, for example, with a mop. Such work can only be carried out near cold radiators.

The housings of sockets and switches are removed before gluing. It goes without saying that the network must be turned off. Dried trellises on rosettes will reveal themselves in relief; they are easy to detect by touch. A cross-shaped hole is made in the center, and the unnecessary one is cut off.

Drying time for vinyl wallpaper

Determining whether the moisture has evaporated or not is simple: you need to touch the wall and ceiling with your palm. Normal drying wall materials- day. IN autumn time The drying period may take up to 2 or 3 days.

After complete drying, check the joints. If the sticker has come off, the edge is pasted over on both sides. masking tape, carefully pull it back, drip PVA glue from a stationery dispenser, press it and dry it with the warmth of your palm.

Video: how to properly hang vinyl wallpaper with your own hands

Good work requires care and strict adherence to technology. But working with vinyl cannot be considered a labor-intensive process. However, the preparatory work is voluminous and costly.

The procedure for gluing vinyl wallpaper begins with an assessment of the purchased canvases and the wall surfaces of the room. Wallpaper must be from the same batch, identical in color and pattern. The walls are free of defects, curvature, etc. But they are rarely like this even in new buildings, so it is necessary to prepare them.

When purchasing wallpaper, you need to take into account that the seller is not responsible for defects that appear on them during gluing and for the results of gluing in violation of the instructions.

Suppliers accept claims for differences in color or article numbers strictly before the roll has been cut. Refunds due to other defects are only possible if no more than one roll is pasted.

Preparatory work

Proper wall preparation

If there is old wallpaper on the walls, remove it. The removal method is selected based on how high quality the glue was. Several withdrawal options are possible:

• dry,
• using a steam cleaner,
• by soaking,
• using a specialized wallpaper remover.

If the surface was previously painted or whitened, it is cleaned and washed.

When preparing new walls, skip the first stage and immediately move on to the second - leveling. All defects (cracks, irregularities, holes, etc.) are eliminated with masking tape, plaster, primer or putty.

After this, the wall must be completely treated with a primer. It is selected in accordance with the initial data.