Children's playground made of tires. Crafts for the playground from logs and wheels - examples in the photo

Life car tires is short, and after just a couple of years of use, these products end up in tire shops or for recycling. But if you have imagination and free time, you can give them a second chance by using tires to decorate flower beds, create garden structures, and even better, when making and decorating such an important part of the garden as a children's playground made from tires.

Comfortable swing made from an old tire

The easiest way to have a beautiful front lawn

Of course you saw perfect lawn in the cinema, on the alley, and perhaps on the neighbor’s lawn. Those who have ever tried to grow a green area on their site will no doubt say that it is a huge amount of work. The lawn requires careful planting, care, fertilization, and watering. However, only inexperienced gardeners think this way; professionals have long known about the innovative product - liquid lawn AquaGrazz.

This material is an ideal basis for making a playground, because initially the tires are soft, elastic, have a rounded shape without sharp corners, that is, they are absolutely safe for the child’s health.

There is an opinion that when old tires decompose, they release harmful substances, but according to the corresponding classification they are assigned hazard class 4 (and, therefore, these are non-hazardous products), the same as home wallpaper. Therefore, there is no need to fear for your baby - he is completely safe on such structures.


Another version of a swing from a tire

The only drawback of rubber is its ability to heat up quickly, so it is recommended to place products made from old tires in the shade, away from scorching heat. sun rays. But these are small things compared to the pleasure that you can give to a child with your own hands.

Principles of working with car tires

Also as a base for crafts would be better suited winter tires - they turn out and bend more easily. To work on the product you will need:

  • several old tires,
  • polymer glue,
  • for making complex crafts - pieces of plywood, plastic bottles and covers, pieces of wood, plastic,
  • screwdriver,
  • jigsaw,
  • screws,
  • enamel paints and brushes.

Video of making structures for a playground:

Types of tire structures for children's play area

Let's look at several types of popular structures that can be made for a children's playground from ordinary car tires:

Sandbox

The easiest way to make crafts from tires is to create a sandbox. If possible, find a wheel large sizes- from a heavy truck or tractor, then it is enough to bury half or 2/3 of it in the soil and fill it with sand from the inside - and a small sandbox with soft, safe sides is ready. And if you attach a rag flag to a pole nearby, the product will turn into a miniature ship, as in the photo. Another option is to make garden paths from tires.

You can take a more complicated route - create an unusual fence for the sandbox with your own hands, which will also become a kind of attraction. For this craft, the tires need to be dug into the ground perpendicularly, leaving about 1/3 of the product at the top. Required quantity tires are installed in a row one after another, forming a soft fence. And if you leave a distance of 20-30 cm between them, then children will be able to jump from one wheel to another with interest.


Sandbox in a big truck tire

Swing

One of the simplest types of crafts made from old tires is a swing. They can be different types, the most popular are vertical and horizontal.

  1. Vertical swing - the plane of the wheel is placed perpendicular to the ground; a child can ride by grabbing the bottom edge or sitting in a hole, as in the photo. Making such sports equipment with your own hands is as easy as shelling pears, for this you need:
  • choose a fairly large, but not too heavy, durable wheel;
  • screw cargo bolts (they are called eye bolts, such products have a loop instead of a head) into one side of the tire;
  • attach S-shaped hooks to the loops;
  • use the hooks to connect the tire to a strong rope or chain;
  • Press the joints tightly with pliers;
  • attach the finished swing to a base, it can be a strong tree or a hand-made crossbar made of wood or metal.
  1. Horizontal swings - in them the wheel is placed parallel to the floor, and the child can swing by sitting comfortably on the plane of the tire, as in the photo. Making such a craft is also simple; everything can be done with your own hands:
  • on one side of the tire fasten the weight bolts in a circle on three sides, at an angle of 120 degrees, to form an equilateral triangle;


Beautiful gaming car made from tires

  • connect a chain or rope to the loops;
  • tighten all fasteners;
  • hang the swing on the selected place on the playground.

Gaming machine

It will be a real decoration for any children's playground. unusual model children's car, as in the photo. Despite the external complexity and beauty, making such a craft with your own hands is quite possible. And to decorate your garden, we make a flowerbed from tires with our own hands.

First you need to evaluate the availability of old tires; to create a car on four wheels you will need 4 wheels of the same diameter, and a three-wheeled unit can be made from only two products of the same diameter, the rest can be larger or smaller. Let's look at the principle of making such a decoration for a children's playground using the example of a three-wheeled version:

  • you need to select two wheels of the same diameter, ideally they should be on disks, if not, you will have to add rigidity to the rubber by screwing plywood circles;
  • dig another wheel flat on a selected area of ​​the site that has been previously cleared of debris, burying it in the soil half the width of the sidewall;
  • on the sides of the future seat, dig two identical wheels end to end, strengthening them well and connecting the joints with self-tapping screws - this will be the rear axle of the car;
  • at a distance convenient for the child (depending on his height), the third, front wheel is dug in vertically and needs to be driven into the ground next to it metal pipe, on which the old steering wheel is attached;
  • the floor between the wheels is covered with linoleum and plywood to create the appearance of a machine floor;
  • A car seat is made from plywood;
  • All parts are carefully fastened with self-tapping screws, washed and painted with enamel paints in any desired color.

Ship


Another version of a gaming machine made from tires

Car tires are a very fertile material for imagination; from it you can make with your own hands many useful, interesting and safe projectiles for a children's play corner. The main thing is love for your baby, a little patience and creativity.

Frog princess made of wheels

Still have a couple of worn-out tires left? Then you can create a rather pleasant and cheerful picture on the site - a frog sitting on the edge of the playground. Since the process takes a couple of hours, in terms of costs, you only purchase paint for decoration finished design. Children also really like different fairy-tale heroes. Here we make garden sculptures with our own hands.

First, we lay 2 tires on the ground next to each other, close to each other. We put 3 tires on top of them, so we get garden figure, somewhat reminiscent of a pedestal.

We fill the tires with soil from the inside and proceed to the design:

  1. Two shorter, thicker branches and two longer, thinner branches form the frog's legs.
  2. Special shape wooden blocks, which can be cut with an ordinary hacksaw, are complemented by paws.
  3. We cut out eyes and a crown for our sweet princess from plastic bottles, and simply paint on the rest.

The video describes in detail how you can make a fence from worn-out and unsuitable materials using your own efforts and from scrap materials. vehicle tires

In previous articles we discussed in detail how to decorate garden plot and any other territory, how to use dozens in various ways and how to make a variety of creative and safe things out of tires. Today we will raise the topic of children's sports grounds, which are one of the the best ways disposal huge amount used rubber, thereby helping environment, as well as the arrangement of courtyards and children's sports grounds where the state is not able to take care of this. For example, in the countryside, in remote ordinary villages and poor dacha-type settlements, simply no one except you yourself will build a playground, which is so important for children in the summer.

Similar children's sports grounds are good with a large variety of shells in defiance of the beautiful, bright, but very limited commercial yard structures. The main thing here is ideas, availability of hands and time. In addition to the wheels, you will need wood, as well as a lot of fasteners, bolts and nuts and sand, and possibly some chains.

Remember that, despite the fact that children will walk on the tires with their feet, rubber that has served its purpose on dirty and toxic roads must still be washed in a strong cleaning solution before use, then rinsed with water under strong pressure.

So let's get started: ideas and short description. In each example, pay attention to the size and thickness of the tires and their parts. The key point in assembling such play structures is that each tire must rest against something above and below or be suspended from something - also most often both above and below, so as not to deform too much during use - under the weight children.

First of all, these are, of course, bulk and hanging structures, along which you need to climb up: at an angle, vertically, or onto some three-dimensional figure.

This simplest form- “Wall”, when you have to climb up on one side, climb over the crossbar from above and go down on the other side.

A vertical hanging wall made of tires on chains for older kids.

Another inclined wall, where the tires are nailed entirely to a wooden sheet, and mulch or sand is poured between the tires and into them below. Pay attention to the cable-rope running from above: you can climb the wall by grabbing the tires with your hands and resting your feet on the bottom ones, or you can climb by walking with your feet and moving over the cable to keep your body position perpendicular to the canvas.

Analogue - without mulch, but tires different sizes, so that the climb is absolutely safe, but a little more difficult.

Again, a wall with a slope, but pay attention to the “goats” made of wood, and also to the fact that the two lower rows of the wall are made of tires, and the two upper ones above them are made of tire tubes.

Low incline hanging wall for training agility and balance.

The same thing, but with a greater slope and made from half car tire tubes:

An analogue is a suspended track made of tires.

All kinds of other volumetric structures for lasagna:


Worth doing it in 3 levels

And here they made ladders from tires, and dug them into an embankment of sand and earth. In some cases they were used as a ladder for slides.

Finally, a very interesting general “swing” made of tires (for a group of children), on which you can climb and sit, but you can hardly swing.

A variety of hanging structures of various formats between beams or side supports made of tires: in the middle, tires can hang or be fixed/lie statically, positioned vertically or horizontally.

The next idea is tire tunnels, but the tires must be of the appropriate size. Tunnels can be ground or mounted (on chains) for older children (in this case, the tires must be fixed both from below and from above, so that the wheel does not suddenly “move” to the side when the child is inside) or on a beam (at the same time, so that someone - it didn’t fall out, the tires should occupy the entire space between the vertical posts). Using wood between large tires or concrete pipes. Inclined (tires are fastened together with chains so that the tires do not collect at the bottom) and vertical.


Mulch from wood chips here is a very bad choice, sand, of course, is much better




Essentially it's fun arithmetic, but with the appropriate tire size it's a great tunnel for little ones

And here, in an excellent creative sports device for training your arms, there are tires - a springy platform-buffer for landing and pushing off with your feet.

Continuation - ideas for balance training complexes, large game objects and much more - see the second part of the article.

Source among others:
www.playgroundideas.org

Turning used items into various pieces of furniture and decor has long become the norm. Many people no longer look at old tires, pallets and plastic bottles as garbage, but solely as construction material. Perhaps, after reading our article, you will also join them, because today we will talk about what amazing crafts from tires you can make with your own hands.

How to make crafts from tires with your own hands.

Let's start with not just beautiful, but with beautiful and useful. From used tires you can make many functional things for your garden plot.

How to make garden furniture from tires with your own hands - master class.

Old tires need to be washed and cleaned. You can use it for cleaning special means for cleaning tires - then your tire will acquire a black shiny appearance.

We paint the side surfaces of the tire acrylic paints. For more interesting looking garden furniture We can cover the side surfaces of the tires with leatherette and paint it.

To get rid of the gloomy black color, first paint our entire workpiece white. Then we apply our drawing with colored paints. And finally, add clear dark contours to the drawing.

For the middle of our ottoman we make a round pillow. In order to apply color painting on black leatherette, fill the space under the design with white paint, and then apply a colored pattern on top of it.

How to make an ottoman with a knitted cover from an old tire - master class.

If for garden furniture made from tires its resistance to weather conditions was important to us, then for a gazebo or terrace we can make something different nice option ottoman made from tires.

We attach the legs to the tire that has been cleaned of dirt.

Knitting lateral surface for our ottoman. If you don’t know how or don’t want to knit, you can use parts of an old sweater for these purposes.

We fasten the knitted fabric to the tire from the side and bottom. We close the top hole in the tire with a circle of plywood.

We crochet the round knitted piece for the top of the ottoman with the side piece.

Interesting options for crafts made from tires.

There are others simple options garden furniture made from tires. We can stack tires on top of each other and use scraps from the top of the tire to make seats and armrests.

Or another version of furniture made from tires. Wooden spacers are inserted into the tire halves and a soft roll is sewn in - so you have a comfortable seat for the chair.

Tire crafts for children.

It is easy to make devices for playgrounds from tires. For example, here is a simple swing.

Or a car that will not leave any child indifferent.

DIY flower beds made from tires.

Very often, old tires are used to create flower beds and street flower pots. So to speak, cheap and cheerful. The flowerbed can be given more decorative look, decorating its edges in a more interesting way.

To make such a flowerbed, you should mark the side of the tire as shown in the photo. And then just cut along the line.

The cutting process itself can be tricky. Ideally, this is best done with a jigsaw. If you are cutting with a knife, then lifting the cut with a wooden peg will make your work much easier.

The cut tire must be turned out. It's easier to do it together. But you can turn out the tire alone by stepping on the edge of the tire with your foot and turning out the other edge with your hands.

Such flower beds can be varied and original - this is what helped them gain great popularity. The most famous option is to place the tire on a stand that we previously cut from its top.

A person’s desire to decorate the territory of his dacha, to create a wonderful, cozy environment there using things at hand, contributed to the emergence of many design ideas.

The original material for implementing extraordinary ideas is old car tires.

Entertaining crafts made from tires for the garden will decorate both flower beds and playgrounds, as well as paths. Tires and tires can be used not only to create elements of garden decor, but also for practical purposes - they can be used to build a swimming pool, furniture, swings, sandbox, and bicycle parking.

The photo below shows extraordinary ideas for crafts made from tires.

Idea No. 1. Making a flower bed from tires

Most easy scheme– we take an unnecessary tire, fill it with soil and plant plants. Of course it won't be unique decorative element garden design.

To fix everything, we take bright colors(acrylic or oil based) and paint the tires. Next, we place them on top of each other, resulting in a multi-tiered flower bed.

An original solution would be a vertically located flower bed, folded in the shape of a pyramid. We fill the soil inside and plant climbing flowers - petunias or strawberries. On top you can place a pot with a single plant.

You can also make a hanging flowerbed from tires. To do this, you will need a steel chain - it will need to be attached to the tire and the entire structure will need to be suspended from a tree.

To prevent the soil from spilling, cover the bottom of the tire with a thick sheet of rubber or other suitable material.

An unusual solution would be to make flower beds in the form of a teapot and cups. All you need is a few tires and some scrap metal tape and pipes.

Idea No. 2. Tire figures

Another type of crafts made from tires for the garden are a variety of unusual and intricate figures made from tires. They will enliven your garden and improve the mood of everyone in the household.

The figure of a swan is very popular. To make it you will need a tire without metal cord. It must be pre-marked.

For cutting, use a well-sharpened knife. Secure the swan neck with a metal rod. The final step is to coat the resulting product with white or black paint (depending on what kind of swan you want - white or black).

It’s enough to simply create a funny horse, zebra or giraffe. Such figures will require a medium-sized wooden beam to be installed in the ground along with a tire.

Crafts should be painted in colors corresponding to a particular representative of the fauna.

It's easy to turn old tires and cans into a frog or a cute turtle. A little imagination will help you make interesting and unusual installations.

Note!

Idea No. 3. Country furniture

Furniture made from tires will look great in the garden.

They can be made in different styles and the use of different upholstery materials, ranging from leather and textiles to wicker and wire.

The tires will make a comfortable chair in which it will be wonderful to relax in the lap of nature. To do this, we take tires and wrap them with intertwined straps and ribbons. It won't take much time, and the result will be entertaining.

You can make garden furniture from different-sized tires of medium and low hardness.

Tires make beautiful tables, ottomans, armchairs, chandeliers, fountains and washbasins.

Note!

Idea No. 4. Tire swing

Swings are an integral part of any playground. Tire swings are safer than those made of wood or metal. They are quite simple to make.

You will need:

  • strong horizontal branch;
  • sharp knife and jigsaw;
  • chain or strong rope;
  • tire.

We tie the end of the rope into a loop; the knots must be strong and reliable. We throw the loop over the branch, pass the rest of the rope through it and tighten it. We place the tires perpendicular to the ground.

We pass the rope through them and fasten it at a height of approximately 0.9 m from earth's surface. The swing is ready!

Idea No. 5. Tire track

Paths created from waste tires, or rather from their tread part, look unusual and original.

We bring to your attention a selection of photos of various crafts made from tires.

Note!

Tires are universal material to create a wide variety of things with your own hands.

Numerous master classes on crafts made from tires can be easily found on the Internet. Therefore, if you have unnecessary old tires lying around, feel free to put them to work, creating memorable elements of garden decor.

Photos of crafts made from tires