Sofa for the balcony - make it yourself or buy it. DIY sofa on the balcony (simple ideas and design tips) DIY sofa on the balcony drawings

Relatively small sizes balconies, especially in houses built in the last century, discourage apartment owners from fully using their space. Most often, unnecessary rubbish and preparations for the winter are stored on the balcony, and even glazed, insulated loggias usually serve as a storage room or a place for drying clothes. Occasionally, such living space is placed kitchen stove and a refrigerator, turning the balcony into a kitchenette.

Do-it-yourself furniture, unlike purchased furniture, will fit well into the dimensions of the balcony.

But you can set up a cozy corner for handicrafts here or make work area for a schoolchild or student to finally just enjoy evening tea at fresh air. For this you will have to. Unlike a purchased one, it will fit well into the dimensions of the balcony, fold up when not needed, leaving maximum free space in a small room.

Installation of a rack or cabinet

For storing canned vegetables and fruits, boxes with “necessary” things and everything else that takes up usable area, you need to make a cabinet or rack. You can compactly place anything you want on its shelves. Its height will be equal to the distance from the floor to the ceiling of the balcony, its width is limited by the width of the room. The depth can be any, as far as is convenient, or dictated by the distance from the wall to the apartment window facing the balcony.

First you need to draw a diagram on which to mark the dimensions of the cabinet, estimate the distance between the shelves, their number and sizes.

To build such a cabinet or rack you will need:

Laminated chipboard (furniture panel);
4x4 cm block for frame, 4 pcs. length 1.168 m and 4 pcs. 0.520 m each;
thin fiberboard sheet (back wall);
corner for installing shelves, confirmations, screws, dowels;
accessories for door canopy (if necessary).
measuring instrument (tape tape, level, corner);
wood saw or power tool;
drill, set of drills for concrete and wood;
screwdriver

If you have a cabinet of complex shape, you should first cut out templates from cardboard.

This will help to better fit the parts to the configuration of the walls in order to avoid mistakes when working with chipboard and wood. Using the templates, mark and cut out parts of the future cabinet.

Mark a place on the floor and ceiling for mounting the frame beam. Check the alignment of the upper and lower marks to avoid distortion of the structure. Attach a sheet of thin fiberboard, plywood or hardboard to the wall for the back wall of the cabinet. Attach the block to the floor and ceiling with dowels concrete slab balcony
Mount the side walls of the cabinet on a block, drilling holes in the chipboard for confirmations (screws) and then screwing the fasteners into the block. Attach the chipboard to the ceiling and floor of the cabinet in the same way.
Mark a place to install the partition in the middle of the cabinet, mount a sheet of chipboard on the corners, attaching them to the ceiling and floor of the cabinet with self-tapping screws.
On the left side of the cabinet the diagram shows a stiffener in a large compartment. This element gives strength to the structure. It won't be needed if left side will be occupied by shelves. If a cabinet or rack is made according to the diagram in Fig. 1, then the stiffener is attached to the corners, placing it closer to the rear wall of the cabinet.
Hang required quantity shelves, mounting them using corners and screws. If necessary, install doors or roller shutters for furniture, blinds.

In the space freed from things, you can install a folding table and other furniture for the balcony.

Return to contents

Folding table for balcony

To make a folding table you will need:

Chipboard or thick plywood;
dowels, screws, hinges;
building level, measuring tool;
jigsaw or hacksaw;
drill, screwdriver.

You need to mount the table on the wall that separates the balcony space from the room.

The shape of the tabletop can be any: semicircle, semi-oval or rectangle. The dimensions are determined depending on the space available on the balcony so that 2-3 people can sit near the table. The tabletop is cut from chipboard or thick plywood.

The central panel, support leg, and top bar are cut out of the same material. The width of the strip should be 2 times greater than the thickness of the material for the table.

The top bar is connected to the tabletop furniture hinges. Fastening must be done from the bottom with short self-tapping screws so that there are no connections on the front surface.

In the middle of the central panel (in Fig. 2 it is rectangular shape) mark the place for attaching the support leg to the hinges (triangular in Fig. 2). Strengthen the loops along the larger leg of the triangle.

Mount the support foot on the central panel so that the upper edge of the panel and the smaller leg of the triangular foot are at the same level. Attach the structure to the wall at a convenient height. Check the horizontalness of the top edge using a level.

Attach the table top to the center panel. To do this, mark 2-3 holes on the top bar so that you can screw the screws into the edge of the central panel.

When folded, the tabletop will be lowered down, hiding the central panel and support leg underneath. The tabletop can be decorated to your liking.

For many years, our compatriots have used balconies as places to store various things and rubbish, store food during the cold season, and also exclusively for smoking. Today people strive to maximize the living space in their apartments, so they try to create a functional room in which they can spend time, relax or do their business.

It's quite possible to improve this non-residential premises by placing an armchair, table and chairs, a sofa on the balcony.

Furniture, together with high-quality glazing and insulation, allows you to make living room. Oddly enough, a sofa is best suited for balconies. Nowadays there are many different types on the market. different models sofas for balconies, which differ in the following characteristics:

Shape (square, rectangular, with drawers, oval, etc.);
Color (you can buy or order cover in any shade);
Design (folding, standard, corner, etc.)
Various sizes.

Many people make sofas for balconies and loggias with their own hands, without resorting to the services of professionals.

If the furniture is not expected to have any complex design features, then for its manufacture it will not be necessary to use large quantity expensive materials. Of course, it will be cheaper to do it yourself than to buy a finished product.

Which sofa can you choose for the balcony?

Free space is seriously limited, unlike in other rooms of the apartment, so the selected sofa for the balcony should have compact dimensions, and preferably several functions. If the size of the loggia allows, then it is best to install a sofa bed in it.

Sofa bed on the balcony.

Many models of sofas for balconies are very compact in size and can be folded out, so on a warm summer day you can lie down on the sofa and have a snack. In addition, another place to relax in the apartment has never bothered anyone.

But some people don’t need a folding sofa for the balcony at all, so the choice is made in favor of the most standard models. Now on the market you can find many of the most different options, including small sizes. It would be correct to measure the length and width of the balcony in advance, then come to the store with the measurements and, in accordance with them, arrange the purchase of a sofa for the balcony.

Small sofa on the balcony.

Moreover, as alternative option folding and standard designs the possibility of purchasing is often considered corner models. But it is worth noting that a fairly large room is desirable for them, especially in width.

The use of such sofas for a balcony requires seating on both sides.

A simple corner sofa.

At the same time, if there are few cabinets, chests of drawers and bedside tables at home, then in the store you need to look for models that are equipped various boxes and shelves. You can store various things in these balcony sofas.

How to make a sofa on the balcony yourself?

It is not always possible to purchase a sofa for a balcony in a store. This is often due to financial difficulties or the lack of desired furniture in stores.

Sometimes owners have a desire to make a sofa themselves.

By by and large, there is nothing complicated in this work, because in order to make a simple small sofa for a loggia, you do not need any special construction and installation skills, or the presence of special tools.

The easiest option is to make a regular sofa, without any additional functions. Of course, if you want to make a folding structure with your own hands, then you will need both skills and appropriate tools (to create such a sofa for the balcony, you may need the help of specialists).

The work is carried out in several stages:

First you need to make a project. Regardless of its size, the process of creating a sofa for a balcony should be accompanied by a detailed plan and at least banal amateur drawings for a visual representation of what will happen in the end. To do this, you need to measure the installation location and calculate the appropriate dimensions of the structure, carefully consider the shape and design. You can use the Internet as an assistant, where, if you wish, you can find the entire free plans and drawings of sofas for the balcony.
At the second stage, the procurement of all necessary materials. Sofas on the balcony usually have the simplest design, so you don’t have to buy anything special. To build such a technically complex structure with your own hands you will need: wooden blocks, chipboard or plywood sheets, antiseptic and protective compounds for wood processing, fasteners, foam rubber or padding polyester to make the balcony sofa soft, Velcro strips for attaching pillows, hammer, wood saw, pliers, stapler for working with furniture.
At the third stage, it is necessary to process all wooden elements future sofa for the balcony using antiseptic and protective compounds. With this process, not only long-term and reliable protection wood, but it will also be possible to give it an aesthetically attractive appearance.
At the fourth stage, you need to start forming the frame. To do this, you first need to cut the beams with a hacksaw, observing the dimensions indicated in the drawing prepared in advance. After this, a frame is knocked together from the beams. In most cases, for sofas on balconies, for greater reliability, all areas of the joints of the beams are additionally glued (in addition, it would not be a bad idea to strengthen them with metal corners). When creating the back of a sofa with your own hands, do not forget that it should be located at a slight angle, otherwise it will be very uncomfortable to sit.
At the fifth stage, you should start creating a soft back. Sofas for balconies usually use the simplest foam rubber to add softness, so there is simply no point in purchasing expensive fillers and foreign analogues. Foam rubber must be glued using household and environmental adhesive compositions to plywood sheets, and then tightly cover them with fabric intended for upholstery. Also, sofas on the balcony can be equipped with removable upholstery that can be washed, so foam rubber, if used, must be placed inside.
Next, you need to nail the plywood sheets to the wooden frame. You can do this yourself using ordinary nails, but for reliability you can secure them with self-tapping screws. The finished pillows are placed directly on the frame, just like the seats. Most sofas for balconies do not have side backs with armrests, because they take up extra space, which is extremely inconvenient in conditions of limited space. Of course, if you have a large loggia, it is best to make armrests.

Final work

In the store you can purchase quite practical types of fabric that are convenient for covering homemade sofas on balconies and in other rooms. The upholstery is done by hand using furniture nails and a hammer, it is very convenient furniture stapler. If necessary, a sofa created in the manner described above can always be disassembled, it will not take much time, and the remaining materials will be quite suitable for further use.

DIY sofas for balconies can also have free space located under the seat.

Sofa - storage closed.

When creating it, it is necessary to use canopies, which are usually mounted to the rear crossbar wooden frame and are attached to one side of the seat. It is very convenient for balcony sofas to have free space at the bottom; it can be used to place various things.

The sofa - storage is open.

For many, a balcony is a place for privacy, a small cozy room in which you can both work and relax. This is truly a full-fledged room that requires appropriate decoration - and very important role playing sofa on the balcony.

photos

Built-in models for balconies or loggias

If we are talking about small room, in which you need to save space, then the best option– built-in structures, and this applies to sofas too. Furniture for a balcony or loggia should be compact, and folding sofas or beds are ideal. These are the sofas that are disassembled and assembled. You will not have any difficulties with transportation finished product to the balcony - you can simply assemble it there.

Built-in sofas are minimalist and can fit into any interior. They save space as much as possible, as they are installed in a special niche and allow you to use all the free space. They are also multifunctional - they can be used to store things, as they have built-in drawers. There are several optimal options built-in sofas for balconies of any size.

This is, for example, “Chest”. This is a sofa with plenty of free space inside. It is hidden under the seat and, due to the opening mechanism, it really looks like a chest. There can be one niche under the seat. Sometimes there are several niches separated by a thin partition. This option is convenient if you are going to store linen, any rags, or clothes on the balcony.

Roll-out sofa represents a complete sleeping area for the night and comfortable sofa(or even a chair) during the day. Such sofas also have fairly wide backs and armrests, and the latter can serve as a seat or a stand for something. They come with or without drawers. There are several models: “Dolphin”, “Eurobook”, “Accordion”, “Folding bed”. They are universal and really easy to transform and roll out. The bed can be either large or small, single. There are entire sets of roll-out furniture - for example, a sofa and an armchair.

If you have a recess or indentation from the wall on your balcony, you can install the sofa there. This will be the so-called homemade built-in sofa. Moreover, you don’t have to bother too much with the design. You can literally fill the seat with a blanket, throw some pillows, decorate it with using chipboard or plywood back - and that's it, ready.

Options

Sofas for the balcony are practically no different from usual options– unless they are their mini-copies. The following types are especially popular:

With boxes. Sofa chest of drawers, sofa wardrobe. This perfect option, if you want not only to create a cozy place, but also to use the space with maximum benefit. These boxes are somewhat similar to options for linen. You can put bed linen there, out-of-season clothes, or any trinkets that are better not lying around in a visible place. If you are going to do needlework on the balcony, then this is where you can put your knitting needles or yarn. This will be the so-called chest for useful little things.

Corner design. Due to its design, this furniture can take up very little space. It is installed close to the wall, which is very convenient. These sofas are usually considered the most comfortable. The only problem is that due to the angular shape, you won’t be able to lie on the sofa, and such products, as a rule, are not long enough. But they are just right for get-togethers. Another table nearby, an armchair - and everything will look very nice.

Sofa bed, chair bed. It is a folding structure that takes up very little space - when unfolded, it looks like a small (maximum seventy meters) narrow single bed. Suitable for those who like to sleep in the fresh air, and a nightstand can easily fit next to it.

Poof. Shapeless or soft sofa would be a good option for those who like to read or relax on the balcony. It puts you in the mood for relaxation just by looking at it, because it is very soft and cozy and promotes relaxation. However, remember that during the cold season you cannot spend days on the balcony. Heating is prohibited in this part of the house, so you will be cold even with a heater. But you can make your life easier by installing underfloor heating.

Not good a good option there will be a sofa with a pull-out structure or folding furniture. The size of the room will not allow you to enjoy the unfolded version. Of course, you can always buy one - if it fits perfectly into the interior unexpanded or you have a large balcony. However, it is still not worth purchasing this type of sofa. The same goes for the book sofa, with folding options.

If you don't have the opportunity to buy a sofa, pay attention to the benches. They must necessarily have backs and not the most small size. Yes, of course, the benches can be a bit harsh, but it’s enough just to sheathe them with thick soft cloth and cover it with pillows. This option is also suitable for wicker sofas. They can be left in their original form, since wicker is a rather creative solution for a balcony. You can put pillows and a colorful blanket.

Hanging sofas, swing sofas and hammock sofas can only be used if you are absolutely sure that the ceiling will support it.

Original design and ideas

A stylized sofa is very suitable for a balcony. You can turn your balcony into a cute and cozy place for relaxation, using wicker and soft materials, filling the space with pillows. Next to the sofa you can install a bookcase or an easel with a chair.

If you prefer a balcony as a workplace, pay attention to the strict wooden designs. Add light to the room. Choose stylish leather sofa, if space allows, purchase a swivel chair upholstered in the same material. There must be a table, otherwise where will you work with your laptop or documents.

If your work is far from numbers and reports, but is connected, for example, with handicrafts or craftsmanship, free maximum amount places on the floor. Very the right decision will install shelves on the walls (at a distance from the floor) - for example, put a sofa and attach shelves next to it. This way you can use your workspace as conveniently and efficiently as possible.

Today it is fashionable to use the balcony as a place for sports. Of course, there can be no question of active forms of it, but, for example, yoga, meditation or training on exercise machines are quite suitable.

How to do it yourself?

Making a balcony sofa yourself is not that difficult. The main thing is to strictly follow all instructions and be careful. A homemade sofa will definitely suit you and your appearance, and size, because the height and width of the balcony will be taken into account.

So here's what you'll have to do.

First, measure the dimensions of the balcony and the approximate dimensions of the sofa, think about how it will be placed on the plane. If necessary, draw or create a layout.
The best material to use for making a frame is natural boards. They are stronger and easier to work with. You can take a ready-made Euro pallet, a sheet of plywood or chipboard. They must be dense enough (at least ten millimeters) so that they do not deteriorate from frequent friction.
Cut the sheet according to the dimensions you have outlined and connect the boards with self-tapping screws or special furniture nails (using a drill). For fastening you will also need furniture corners. In the same way, secure a sheet of plywood to the frame, in place of the seat and backrest. They need to be covered with foam rubber, and then done with finishing - decorate with fabric, leather, or add another layer of pillows. The best way to do this is with a furniture stapler. You can simply cover the frame sofa cushions, on which you will be comfortable to sit. So you don’t need to struggle with a stapler, and it’s easy to wash.

To make a folding sofa, you will need a special folding design. These are sold at any hardware store. For your own convenience, you can attach wheels to the sofa.
If you want to equip the sofa with drawers, then you need to attach the seat to the frame like a door to the wall. Use special loops for this. Then the bottom should be empty; it is best to cover it with insulator, fabric or film. You can put several baskets there to store things.

How to make a sofa for a balcony, see the following video.

The balcony is now a spacious place to relax with soft seats, chairs, maybe even a bar counter. But you can create such comfort with your own hands: sew curtains, make lamps and new small sofas.

The good thing about a homemade seat is that it fits perfectly into any area. It is not always possible to choose the perfect sofa for the small size of the balcony. Moreover, an option that is too large will interfere with the loggia or balcony.

First of all, decide on the design of the room; you can draw a plan, having previously included a sofa in it.

In addition, if properly designed, a sofa can become additional option storage, which is important on the balcony. Therefore, consider a retractable or lifting mechanism.

The design must be simple, durable and resistant to temperature changes and wear. Be sure to think about the components. You can show your imagination and make interesting details. For example, a minibar in one of the armrests or a comfortable pull-out bed covering the entire area of the balcony.

Below you can store jars, seasonal shoes and clothes, and clean linens.

If you doubt your abilities, you can purchase a custom-made sofa. But it won't be cheap. Therefore, demonstrating your abilities is the best option for saving.

Some use a loggia or balcony as extra room: office, bedroom or nursery. In this case, a sofa definitely won’t hurt; in extreme cases, it can become a sleeping place.

How to make

Even novice carpenters will be able to do this task. You don't have to start right away complex design, simple sofas look beautiful in Scandinavian style and Provence, the main thing is to choose the appropriate decor.

Take your time, carefully calculate the dimensions and quantities of materials, performing all the steps step by step:

1. Consultation with specialists; some furniture companies can provide advice and even draw a drawing.

2. Thinking through the production, starting from the drawing and ending with the finishing touches.

3. Draw a sketch and adjust the dimensions.

4. Prepare tools.

5. Purchase materials.

5. Start assembly.

The simplest option is a rectangle with special niches for linen and cans, when top part the sofa just rises.

Materials

When preparing materials, pay attention to quality. They must be treated with special compounds that protect against fungus, temperature, and moisture. Moreover, a beautiful varnish will add an interesting accent to ordinary wooden furniture.

You will need:

plywood for back
corners for frame
foam for softness
glue for foam rubber (only special one will do)
tapestry fabric for upholstery

Tools

The easiest tools to prepare are:

screwdriver
furniture stapler
screws, washers, bolts
nails for upholstery and decorative elements
hammer
drill
pliers
jigsaw

Assembly

Saw the bars the right size and assemble the frame. They need to be connected to metal corners, glue and connecting bolts.

Plywood becomes the back of the future sofa.

Be sure to screw it carefully onto the screws, the nails will not withstand time and weight.

We fix the foam rubber by carefully gluing it to the plywood. Try to achieve round shape. Use two layers - the bottom one is hard and the top one is slightly softer.

The stapler fixes roundness and layers together.

The fabric is cut, stretched over the frame and secured using a stapler and furniture nails.

We sew pillows from the same fabric or matching material, decorating them with ribbons and buttons. Try to be consistent with the design and layout.

Look at the ideas of different sofas in the photographs and get something for your unique design sofa on the balcony.

Pillows create an interesting oriental flavor, especially if there are really a lot of them.

A painting and flowers above the sofa are beautiful, but not always comfortable for sitting.

Drawers are optional; you can make a sofa in the form of a large pillow.

On open balcony in our climatic conditions, a sofa is not a very practical thing. For the winter you will have to bring the sofa inside.

A sofa and pillows made from the same material look boring; you’ll have to add some accents.

Photo: yaplakal.com, babyblog.ru, vk.com, ok.ru

Since Soviet times, apartment owners have tried to equip their balconies with benefits for housekeeping. What kind of intricate ideas have come to mind for its use - a pantry for “unnecessary things”, a warehouse for tools and spare parts, a bin for canned food and winter supplies, i.e. echoes of that time, what if something is missing or you need to stock up for a rainy day.

Nowadays, it is quite affordable to purchase any product in a store without turning your balcony into a barn. It would be much better to equip it as additional, comfortable housing. It is enough to install a soft sofa, hang curtains and sconces, and you are guaranteed extra bed for relax.

But not every owner decides to put a sofa in a small area, firstly, it has dimensions, and how to squeeze it in and install it, and secondly, the entire balcony is cluttered, as they say, it is impossible to walk or drive, and plus there are financial costs.

But there is a wonderful way out of the situation. It is quite possible to make a sofa for the balcony with your own hands, according to the size of the balcony and at the same time rationally use cash.

If the balcony or loggia has a huge area, which is quite observed in apartments with modern layout, then you can afford to purchase a ready-made sofa, and the problem of arranging an additional soft spot solved.

But if the balcony is small, first of all you need to develop the design of the future interior and decide which sofa is appropriate to choose and its purpose, so that later the room really becomes a cozy and favorite place to relax.

Sofa in oriental style to the balcony

There are several types of sofas for the balcony:

Eurobook sofa;
chair-bed;
transformable sofa;
corner sofa.

In order to choose a sofa for your balcony, you need to understand in detail all the models, their ease of layout, mechanisms, and ease of use.

Eurobook sofa- this is one that has long been familiar and simple designs. When folded, it looks like a book, the backrest is standing and comfortable for sitting while relaxing. In order to transform the structure into a bed, it is enough to pull the seat forward and place pillows from the back on the horizontal part. Such an additional sleeping place will completely decorate your balcony, give the interior comfort and a unique look.

Chair-bed Suitable for a narrow balcony. Its design is very simple and does not require great effort in order to decompose. The seat is folded like a book; if you lift it and pull it forward, comfortable legs are installed, and the backrest is placed in the free space. This chair cannot accommodate several people, but it is quite suitable for you to lie down and read a book or relax in the fresh air.

Difan-transformer. If you keep up with the times, take care of every square meter of your home, a transforming difan would be an excellent purchase for your balcony. This is one of the modern and fashionable types of furniture. Its construction and design can be completely different, but it has one feature in common: thanks to a special mechanism, the sofa can easily be transformed into and back into a sofa. If you have studio apartment, this design is perfect for a schoolchild, during the day - for doing homework, at night - for sleeping.

Corner sofa. Furniture showrooms and factories represent a large assortment corner sofas who have original look, attach small room more comfort, comfort and convenience. If you decide to install this type of furniture, it will emphasize your practicality and good taste. A corner sofa helps to increase space; it is not only comfortable to sit on, but also to lie on.

Corner sofa on the balcony

There are many types of beautiful and modern upholstered furniture for a balcony or loggia. Design and design features Sofas are generally not very different, but if the sofas do not have additional boxes and niches for bedding, this always upsets the owners. Therefore, before purchasing upholstered furniture or making it to your own order, you need to take into account this important fact.

Also, while developing individual design sofa, you need to think about its purpose and future use. Since you are making a sofa for yourself and the size of the balcony, this is not enough. Its design must be equipped with all necessary components:

high-quality folding mechanism, at the same time simple, convenient and wear-resistant;
from the side handrail - armrest you can make a retractable mini-bar;
Linen drawers can be placed in the lower facade of the sofa.

If you put in a little effort and imagination, it is quite possible to make a soft one. Whatever design you choose, the main thing is that the furniture pleases you, is cozy and soft, so that you can sit and lie down comfortably. Furniture made by yourself will not only bring a lot of positive emotions, but will also save the family budget.

How to make a sofa for a balcony yourself

Important! If you have a one-room apartment and a little free space, the only thing correct option– this is to convert a balcony or loggia into a cozy and multifunctional one. You can install a transforming sofa in it, which folds out like a cozy bed at night, and during the day it turns into a table with a soft seat.

Sofa manufacturing details

If you decide to make upholstered furniture on a loggia or balcony with your own hands, you don’t have to be a first-class carpenter. To do this, it is necessary to develop a design for the room and have an idea of the future design. The main thing is not to rush and follow the step-by-step manufacturing steps:

consult with experienced specialists;
plan carefully step by step process manufacturing;
calculate all dimensions and complete the drawing;
prepare a set of tools;
buy everything necessary materials for making a sofa.

To get more accurate information on the manufacture of upholstered furniture, it is enough to use the video on our website.

DIY sofa on the balcony

One of the simpler and more familiar types of construction is rectangular. Usually, her inner part equipped with niches for bed linen. Such drawers are located not only under the seat or in the lower retractable facade, but also located in the side armrests or backrest.

When you have made all the accurate measurements and completed the drawing, and decided on the installation location of the structure, you can proceed to the main stage carpentry work- make a sofa.

Necessary materials

To make a sofa on a loggia with your own hands, you should prepare:

blocks of durable wood from which the frame for the lower part of the sofa and the base for the back are made. For protection wooden structure from insects and atmospheric influences, it must be treated with antifungal and moisture-resistant impregnation and coated with varnish or wood paint. Consequently, the treated wood will last a long time and give the base a presentable appearance;
metal corners for attaching the wooden frame of the sofa base and back;
plywood board, which is attached to the seat and back;
foam rubber for stuffing the soft parts of the sofa and giving it a rounded shape;
special glue for fixing foam rubber to plywood;
thick tapestry or leatherette for upholstery of the finished structure.

In addition to materials for making furniture, you need to prepare the following tools:

furniture stapler;
screwdriver;
self-tapping screws;
bolts and washers;
furniture and decorative carnations;
drill with drills;
hammer;
hacksaw or jigsaw;
wire cutters and pliers.

Furniture making

Having carefully calculated all the dimensions, prepared the materials for making the sofa and the available tools, you can begin to work. From the bars cut to size, connect the seat frame and the back frame using glue and metal corners.

Original do-it-yourself balcony design

Important! Do not skimp and do not replace self-tapping screws and connecting bolts with regular nails. Otherwise, your furniture will quickly fail and fall apart.

The next stage of manufacturing is fixing the foam rubber. It must be glued to plywood, and the sides and back must be given a rounded shape. The first layer of foam is hard, and the second is softer. Secure all roundness with a stapler.

When the sofa acquired an almost finished appearance, it remained final stage– covering with tapestry or leatherette. The main thing is don’t rush! Cut the fabric to size, attach it to the finished frame and attach it with a stapler.

If there are pieces of unused fabric left over, you can make pillows and decorate them with buttons and ribbons. These soft accessories will add chic to your interior, giving it a unique look.

Making a cabinet for a balcony

In addition to sofas, it is often necessary to have bedside tables on balconies and loggias. And so that the cabinet fits perfectly into the interior of the room, you can either purchase it in a store or make it yourself. We will talk further about how to make a bedside table for the balcony with your own hands.

Making a cabinet for a balcony with your own hands

First you need to make a stiffening box from beams with a section of 40x40. It is necessary to attach the frame to the floor, as well as to the side surfaces of the balcony, using strong metal corners.
Next, a lid is attached to the box. It can extend a few centimeters beyond the box. It is secured using corners that are placed inside the structure.
Then, if desired, you install shelves, depending on your preferences, determine the height between the shelves.
Finally, hang the door.
If there are joints, they can be closed using decorative elements.

Making a cabinet for a balcony with your own hands Self-production cabinets Making tables for the balcony with your own hands