Drawing of glass wallpaper for painting. Paintable glass wallpaper is an excellent option for creating an interesting interior.

What is glass wallpaper for painting?

Another relevant question is how to paint glass wallpaper? For painting, it is better to use latex gloss or semi-gloss paint. The paint must be applied twice, approximately twelve hours apart. The main thing is not to overdo it with the amount of paint, otherwise the roll may separate from the wall. In areas with poor traffic, use waterproof paints that will resist abrasion.

You can classify wallpaper according to such a parameter as quality. There are several varieties available and an intermediate type between them: in appearance they are not much different from each other, but without making the right choice You will be disappointed in this material.

Are divided into:

The first grade is high-quality, its density exceeds 100 grams per square meter.
Second grade - the name speaks for itself; it is impossible to say how long such wallpaper will last.
Economy class is an affordable and common option among buyers: low roll density and fragility.

You know how to glue glass wallpaper, let’s figure out what and how to paint them. Most often, water-based and water-dispersion paints are used for painting glass wallpaper. Acrylic and latex dispersions are easy to clean, some with a brush and detergents. Some similar compositions can withstand thousands of brush cycles (vandal-resistant up to 20,000). Therefore, they can be used even in rooms with active use - in the corridor, hallway, kitchen, bathroom.

Water-based emulsions are also washable, but they are not so stable. At best, they can be wiped several times with a damp cloth. But they do not reduce the vapor permeability of the walls. That’s why they often paint residential premises.

There are also special enamels designed for painting wallpaper. They are also good, but they are more expensive. When selecting, pay attention to the area of use - there should be an inscription stating that this composition is suitable for wallpaper (or glass wallpaper).

Glued and dried glass wallpaper is painted

How thick is the paint? Basically, it doesn't matter. If it is liquid, you will have to apply more layers, if it is thick, less. In any case, to obtain a good effect, the same amount of dry matter is required. Another thing is that sometimes thicker ones turn out to be more profitable, although they cost more. In this case, you need to look at the hiding power and required amount layers.

Pay attention also to the type of surface obtained when painting. Silky texture is best emphasized matte paint, but simply matte will partially hide it.

There is one more point. Fiberglass wallpaper is a porous material and paint consumption, especially when applying the first layer, is high. To reduce it, it is advisable to prime them. As a primer, you can use base paint diluted 1 to 1 with water (if the paint water based). Its coverage will be lower, but due to the large amount of water it will penetrate better into the pores.

When choosing finishing materials for home rooms, you need to think through the entire design so that everything in the new interior looks harmonious and perfect. Remember that the right finish is half the success.

Today, many people prefer modern materials, which are characterized by more advantageous advantages, to standard types of finishing. IN Lately Glass wallpaper (brands Leroy Merlin and others) is becoming increasingly popular among the population. This is a modern type of finishing material, which contains substances used in glass production. This, in principle, is evident from the very name of the material.

To make such unusual finishing the following substances are used:

limestone;
dolomite;
quartz sand.

At high temperatures these components melt to form yarn. The production technology requires a temperature of 1200C. In this way, light and thin threads are formed from the hot mass. If you press them, you get a fiberglass web. It is used in construction as a fastening material.

Previously, in the 30s of the last century, glass fiber was used to produce colored glass. Somewhat later, a method for synthesizing them from glass and wool was discovered. The resulting products were characterized excellent quality, which contributed to the popularization of this type of finishing to its current level.

In the interior such material has beautiful view due to the fact that it can be painted in different colors. We will tell you a little more about how to glue glass wallpaper for painting below.

Designers consider fiberglass wallpaper as the most interesting and practical material, perfect for interior wall decoration. On the walls they look especially presentable.

Some believe that there is only one option for glass wallpaper and they are all similar in appearance. But this is a misconception. Today there are two versions of this product:

Embossed. The material here has a denser structure, so it will be used correctly for finishing. It is also worth noting that it will be quite difficult or almost impossible to damage it or tear it during gluing. Such glass wallpapers have a wide range of relief patterns.
Smooth. They are characterized by a lower density, as well as an even texture, which is why they are popularly called “cobwebs”.

If you want to decorate walls or ceilings with such material, you should choose the right not only its type, but also its textured pattern, if any. With the correct gluing and painting technology, your walls and ceiling will have a chic look and will fit perfectly into any interior.

The most the last stage Putting the surface in order is painting the glass wallpaper. This process is completely doable with your own hands, and it does not require extensive knowledge. You just need to follow simple rules and recommendations, then your decoration will look great in any interior.

The technology for painting glass wallpaper, as well as gluing it, is practically no different from painting other types of surfaces.

The main difficulty here lies in the correct choice of paint. According to construction experts, the best option for painting this type of finishing material would be water-dispersed compositions, in which the binding element is acrylic resins.

The advantages of such compositions include the following points:

do not hide the texture of the wallpaper;
retain all the qualities and properties of glass fiber;
are environmentally friendly clean products;
are resistant to open flames;
characterized by vapor permeability and moisture resistance.

It is worth noting that if you pursue the desire to passively create maximum fire protection in your home, then you should give preference to special acrylic fire-resistant paint. At the same time, you must not forget to treat all metal communications in the room with a special fire-resistant compound.

In addition to the properties described above, water-dispersion paints have the following advantages:

water is used as a solvent, so they are devoid of a sharp and unpleasant odor (such solutions have practically no odor);
quick drying of the painted surface;
paint can be applied by any means;
affordable price.

When choosing paint for glass wallpaper, you should give preference to washable types. This will help greatly simplify wet cleaning in the room and keep the appearance of the walls or ceiling beautiful for a longer period of time.

Detailed information about the properties of the paint is contained on its packaging.

Before direct painting, you need to apply a primer to the surface of the glass wallpaper, but not an ordinary one, but a special one. Its composition is similar to glue. The glue must be diluted with water. Priming at this stage will increase the adhesion of the coating to the paint, and will also allow you to significantly reduce the consumption of glue, which will not be absorbed into the finishing surface, but will be evenly distributed over it.

Remember that before priming you need to wait until the glass wallpaper is completely dry, and also remove any dust left over from its surface after gluing. Typically, dust removal is carried out in situations where the wallpaper has already served as a final finish for some time before painting. To remove dust from them, just walk over the entire working surface with a slightly damp cloth.

Now everything is ready for painting. This procedure is carried out as follows:

We prepare inventory. To apply paint, use a brush, roller or spray gun. The method of applying paint is determined by the tools you have in your home, as well as your desire. Most often, paint is applied to glass wallpaper using a roller.
Open the paint and stir it well until a uniform color is obtained.
Pour the coloring composition into a special tray and dip the roller into it.
After the roller is well saturated with paint, we place it on the raised area of the pallet and begin applying the coloring composition to the surface of the glass wallpaper.

Please note that the paint must be applied in a thin and even layer. It is best to paint the joints between the strips with a brush. The second coat of paint should be applied only after the first has completely dried. Several layers will allow you to obtain a uniform and rich color of the walls or ceiling.

At the same time as the walls and ceiling, the communications (heating radiators, etc.) should be painted.

As you can see, in many respects glass wallpaper is modern and the most practical material, which will allow you to quickly and effectively complete interior decoration. The key to the success of gluing and painting them is strict adherence to the instructions and rules, without which it will not be possible to properly glue the wallpaper and apply a finishing layer to it. Remember that when high-quality painting and the correct selection of paint, this process can be carried out many times.

Advantages and disadvantages

So, having talked about the features of fiberglass wallpaper, let's touch in more detail on such important points as their advantages and disadvantages. The fact is that despite the increasing popularity, this material continues to remain a kind of curiosity for most people. That is why it is necessary to more carefully find out what its main advantages are, whether it can cause harm, or mainly only benefit. So, let’s briefly describe the main advantages, a number of which we have already discussed a little higher in this article.

Advantages

They are distinguished by the highest level of durability, which most other wallpaper coverings cannot match. Here they look like favorites even against the background of such durable wallpapers as vinyl or non-woven. Not to mention paper ones.
Thanks to the special structure, which is somewhat reminiscent of the loops and weaves in an ordinary knitted hat or sweater, a constant supply of air is ensured.
Due to the structure of the material, fiberglass wallpaper does not attract dust. In addition, they are not able to accumulate static electricity.
Of course, they are widely known for their high level of environmental safety. And the absence of favorable conditions for the appearance of fungus and mold makes rooms with fiberglass wallpaper extremely “healthy” from the point of view of long-term and permanent stay in them.
It’s quite easy to stick them on, having done all the work yourself. It is no coincidence that many apartment owners take advantage of this advantage, since it allows them to avoid spending significant amounts of money on paying for the work of expensive construction teams.
Well, in conclusion, I would like to once again remind you of the high level of fire safety of this coating. In addition, even in case of contact with open fire, fiberglass wallpaper does not emit harmful substances and chemical compounds into the atmosphere.

Flaws

There is a wide range of prices, since the cost similar material may greatly depend on the manufacturer and the specific collection. This makes some types of these products inaccessible to many citizens.
During the installation process, you must be careful and take all possible precautions, since in some cases it is possible for tiny glass particles to get on the surface of the skin, which can cause irritation. To avoid this, you must use protective gloves.
As a rule, paint consumption exceeds to some extent what is indicated on the packaging. This happens because glass wallpaper strongly absorbs the dye.
If you want to remove this wallpaper, then dismantling will not be easy. Thus, it turns out that an advantage (strength and durability) can turn to some extent into a disadvantage, naturally, under certain conditions.
The texture of the decorative layer of fiberglass wallpaper is not as noticeable as, for example, structural wallpaper. That is why, after painting in several layers, it can become almost invisible.

Be that as it may, it cannot be said that these shortcomings are critical. In any case, this finishing material has many more advantages than disadvantages.

So, let's start with the disadvantages of fiberglass wallpaper (there are significantly fewer of them):

Paintable glass wallpaper has a less noticeable texture of the decorative layer than that of structural wallpaper; after applying several layers of paint, it can become almost invisible.
High cost of the product - high-quality glass wallpaper from well-known brands The average consumer may not be able to afford it.
The actual paint consumption exceeds that stated on the packaging - fiberglass wallpaper absorbs the dye well.
Problematic dismantling - if the gluing of glass wallpaper for painting was carried out correctly, in compliance with all conditions, then it is very, very difficult to remove them.
When gluing, it is worth considering the possibility of tiny particles of fiberglass getting on the skin, so it is better to carry out work with gloves; there should be no exposed areas of the body, optimal solution will use a respirator.

And now about the advantages:

The use of only natural materials in the production of glass wallpaper allows us to speak about the complete environmental friendliness of the product. And in our artificial age this is already a lot.
Glass wallpaper does not contain a nutrient medium for the development of fungus, mold and microorganisms.
High strength - such wallpaper does not tear, cannot be scratched, and is not afraid of chemical attack.
The material is not capable of accumulating static electricity, and the wallpaper does not attract dust.
Thanks to special weaving, glass wallpaper does not interfere with air circulation in the room and improves the microclimate.
Fire safety - fiberglass does not burn and does not emit harmful substances in the event of a fire.
Fiberglass wallpaper can be painted more than 10 times.
The service life of fiberglass wallpaper is more than 30 (!) years.

Like any type of finishing work, the use of glass wallpaper has positive and negative aspects. You need to know them in order to assess whether it is worth using this type of finish or whether it is better to pay attention to other options.

The advantages of glass wallpaper (for example, Leroy Merlin) include the following points:

The material is environmentally friendly, since no toxic substances are used in its production process.
High fire safety of the finish. The sheets are not subject to combustion. Please note that when in contact with fire, glass wallpaper does not release toxic and toxic substances into the air that are harmful to human health.
The material does not accumulate static electricity, dust, or dirt. In addition, the sheets are absolutely hypoallergenic.
High moisture resistance. The material does not delaminate when exposed to moisture. Also, glass wallpaper does not swell.
Good breathability.
The surface is able to “breathe”.
No requirement for a smooth starting surface. This finish is great for masking small potholes and cracks.
The presence of a reinforcing effect. Thanks to it, glass wallpaper can be used to simultaneously strengthen wall or ceiling surface old buildings.
They have high surface resistance to prolonged exposure to light.
Mold and mildew do not form under the finishing.

In addition, working with this material is very easy and even a beginner in the matter of gluing wallpaper on walls and ceilings can handle it.

It is also worth noting that glass wallpaper is an excellent surface for painting. Their surface can be repainted many times. As experts note, paint can be applied 15 to 25 times on one coating. Moreover, each layer of paint will not have a negative impact on the appearance of the walls and ceiling.

Therefore, glass wallpaper is considered indispensable in the interior. For repeated painting, experts recommend choosing sheets with a clearly expressed relief pattern. This is due to the fact that the implicit design will gradually begin to wear off after several layers of paint, which will have a bad effect on the appearance of the entire interior as a whole.

If some people think that they can just take it and start repairing it, then they are mistaken, because before. Before taking on such serious problems, it is imperative to find out in as much detail as possible all the details regarding materials and their application.

On a note! If you follow all the necessary recommendations and instructions, it is quite possible to install fiberglass wallpaper yourself.

In our case, there is absolutely nothing to worry about, since fiberglass wallpaper is a very safe material if we consider it from the point of view of environmental safety. Indeed, in fact, the basis for their production is exclusively natural raw materials, or, to be more precise, ordinary glass, albeit with some special additives.

Even high school students are well aware that glass begins to melt when it reaches a certain temperature level. In this case, as a result, thin fibers are obtained, from which a kind of “yarn” is made. Moreover, we are not talking about an ordered fabric with vertical and horizontal threads that evenly intersect and intertwine each other at an angle of 90 degrees. In our case, we are talking more about the random interweaving of many thin glass threads that form an overall large canvas.

After the fiberglass has been produced, rolls are made, which are subsequently sold to hardware stores and wallpaper stores. As for the decorative finishing of the outer layer, it can be different, both simple and patterned, reminiscent of drawings and attractive ornaments. By the way, it is precisely in the pattern that one of the differences between fiberglass wallpaper and the so-called “cobweb”, also known as painting fiberglass, lies.

As for the main components that are used in the manufacture of fiberglass wallpaper, here we can name exclusively natural materials, which, as you yourself understand, are environmentally friendly, and therefore completely safe for the health of adults and children. So, here are the raw materials used in production:

quartz sand (from which glass and glass threads are obtained);
lime;
sodium carbonate (soda);
dolomite.

As you can see for yourself - no chemicals or dangerous additives. Moreover. In addition to safety for human body, natural raw materials guarantee higher performance characteristics and increased service life,

In addition to such an important characteristic as the appearance of the product, fiberglass wallpaper has other differences from its more traditional roll counterparts. Let's see what their main distinctive features and features:

They use exclusively natural and environmentally friendly materials, as mentioned earlier.
In addition to this, I would like to note that it is the use of such raw materials that greatly contributes to the fact that during further use, fiberglass wallpaper is not a source of an environment favorable for the development of fungus and mold. In other words, we can say that they largely resemble ordinary glass, although this sounds somewhat strange at first glance.
High strength and durability are also a consequence of the fact that in the production of fiberglass wallpaper the most best materials. So, they are quite easy to damage by scratching or tearing the surface of such canvases.
In addition, the composition of the material is completely antistatic, which ensures that people suffering from respiratory diseases can spend a long time in rooms and premises whose walls are covered with such wallpaper without problems.
Do not confuse glass wallpaper with vinyl wallpaper in the sense that they are known for poor air permeability. On the contrary, in our case we can safely talk about excellent breathability, thanks to which, speaking in simple language, the walls have the opportunity to “breathe”.
We must not forget about such a significant advantage as simply installing this type of wallpaper. Thanks to this, it becomes possible to do the gluing yourself. But everyone knows that if you glue wallpaper yourself, it can help significantly save money.
In addition, this coating is very different high level fire safety, which, you see, is very important. By the way, even in cases where fiberglass wallpaper is exposed to direct fire, it can only melt a little, and even then only when exposed to extremely high temperatures. And most importantly: the material itself will not emit dangerous fumes and chemical elements harmful to human health into the surrounding space.
Finally, since we are talking about simple installation, we cannot fail to mention the fairly trouble-free maintenance throughout the entire service life. These fabrics are detergent, and therefore can be safely washed using almost any means. At the same time, when cleaning, it is necessary to pay attention directly to the characteristics of the paint coating itself. If the wallpaper is not afraid of either water or detergents, then in this regard you cannot be sure about the dye.

Important! When purchasing, always ask the seller to present a certificate of product conformity, since you must be sure that you are buying a high-quality and proven product.

Choosing quality wallpaper is not an easy task. The main criterion by which you need to evaluate the quality of a roll is density, but remember that the manufacturer achieves a high density not because of the large number of fibers, but through a fair percentage of starch impregnation.

How to identify a quality product? There is no other choice but to use a little wallpaper by gluing it on the wall, painting it and drying it. Look at the result and, if everything suits you, take full volumes.

Video “How to glue glass wallpaper”

When wallpapering, apply glue to the wall, do not touch the wallpaper.
When gluing, do it end to end. You will need to cut the wallpaper with an allowance of five centimeters to match the pattern, and trim off the excess. If it has a “cobweb” or “matting”, do not make a large allowance.
The joint can be horizontal if you use second-grade wallpaper or pieces left over from another roll.

Fiberglass wallpaper can be glued to any surface, the main thing is that it does not have gaps or porosity.

In order for everything to be fine in your interior, and for the glass breakers to perform their functions as expected, you should stick them correctly. There is a whole gluing technology here. Therefore, answering the question “how to glue glass wallpaper for painting”, two words are indispensable.

The technology for gluing glass wallpaper includes several stages. It is important that each stage is carried out efficiently and in strict compliance with all requirements.

At the very beginning, preparation should be made. It involves the following actions:

It is necessary to dismantle the old finish (wallpaper, paint, etc.).
Large surface defects (cracks, potholes, etc.) should be filled with putty. Fiberglass wallpaper can only mask minor defects.
After all the finishing has been removed and the wall defects have been puttied, the entire working surface needs to be primed. This will strengthen outer layer walls or ceiling. Please note that you can prime before applying putty. This will prevent the formation of defects in the future at this very place.

Preparation is completed by applying a primer after all defects have been eliminated. To increase the adhesion of the two surfaces, the primer should be applied in several layers.

After this, you can proceed to the second stage - preparing the glue. The evenness of the treated surface and the service life of the finish will depend on how well and correctly the adhesive composition was prepared.

In this situation, you cannot use adhesive mixtures for paper wallpaper for the reason that the density of glass wallpaper is much higher. Standard wallpaper glue will not be able to withstand the weight of such sheets, and they will very quickly lag behind the ceiling or wall surface.

For glass wallpaper, you should use a special glue, which finishing manufacturers produce as an addition. Please note that this glue can only be used for gluing glass wallpaper. Here you can use glue with colored pigment (for example, Oscar). It makes it possible to evaluate the uniformity of coating of the working surface with the adhesive composition.

You should also remember that the glue still needs to be prepared correctly. It is sold in powder form and prepared according to the special instructions indicated on the package. The dry mixture is diluted with water in a certain ratio and stirred until smooth.

In addition, it should be noted that there are types of glass wallpaper for which you do not need to purchase glue. They already fundamentally contain adhesive layer. To make them stick to the wall or ceiling, simply moisten this layer with water. You can learn about all the features of this product from the seller or from the information provided on the packaging.

Now that the preparation and preparation glue mixture behind us, we proceed to the third and final stage - gluing glass wallpaper. The technology procedure itself is practically no different from gluing paper wallpaper.

In order to properly glue glass wallpaper onto the prepared surface, you must remember the following nuances:

during work and after its completion, until the adhesive solution has completely dried, there should be no drafts in the room where the work was carried out;
gluing occurs at room temperature;
During gluing, the work surface should not be exposed to direct sunlight (curtains or blinds can be used to protect from the sun).

It is worth noting here that fiberglass may crumble during the gluing process. Therefore, to avoid excessive irritation of the skin of your hands and face, you will need additional equipment in this situation. To avoid unwanted effects from your body, gluing glass wallpaper is carried out in the following form:

clothing must have long sleeves and long legs;
You should wear socks on your feet and gloves on your hands;
To protect your eyes from small fragments, you should wear safety goggles on your face.

It should also be remembered that glass wallpaper, like other types of wallpaper, has a front and back side. In a roll, the front side is always on the inside. But at the same time, a special mark in the form of a strip of gray or blue color.

The gluing process itself has next view:

First, cut the roll into strips of the required length. Be sure to cut the strips in such a way that it is possible to compensate for losses due to the pattern (when using textured types).
We coat the walls with the prepared adhesive. The glue is applied only to the surface of the walls or ceiling, and not to the sheets. To apply it evenly, use a roller or brush.
We glue the strips end to end. This is the most important point, since the strips must touch each other without cracks or gaps.
After fixing the strip, you should go over it with a dry and clean roller to remove air and excess adhesive. Instead of a roller, you can use a clean special spatula. At the joints, the glue must be removed with a rag or sponge.

The described technology is applicable for gluing wallpaper on the ceiling or walls. If you did everything correctly, then glass wallpaper will last on the surface of the ceiling or walls for up to 30 years, even after repeated repainting.

Before starting repair work, carefully look at this practical guide to gluing glass wallpaper. This will help you do everything according to technology and avoid typical beginner mistakes.

First of all, you need to decide on the type of paint:

It is better to choose water-based or water-dispersion compositions, as they are the most environmentally friendly for use in homes.
Styrene butadiene paints are waterproof and adhere well, but can fade in the sun, so it is not advisable to use them everywhere.
Polyvinyl acetate compounds do not have waterproof properties. Despite its cheapness, the paint is very limited in its scope of application.
Acrylic dyes are the best option. The coating is non-fading, wear-resistant, water-resistant and very durable. The color gains saturation and brightness. Ease of maintenance and speed of painting determine the high price of the product.

The choice of suitable paint depends on the type of room in which you will be renovating.

In living rooms, preference should be given to the decorative effect of paint. The load on the walls is minimal. It will be enough water-based composition or latex in the case of a relief texture of glass wallpaper.

In bathrooms and kitchens, water resistance and resistance to cleaning are primarily required. Acrylic compositions are the most suitable, although expensive.
Children's rooms, halls and corridors must withstand increased loads, so do not skimp on paint and give preference to acrylic.

The technology for painting glass wallpaper is not particularly different from other types of coatings, but it is worth considering some nuances:

First of all, you need to wait for the glue that was used to stick the wallpaper to the walls to dry completely. Drying time is usually indicated on the packaging of the composition. But in any case, you should not start painting earlier than 24 hours after pasting.

Preparing the premises is an important step that will save you from unwanted consequences. It is better to cover the floors with film materials, as well as stationary elements; you can additionally glue small parts with masking tape.
It is better not to skip the priming stage. This will reduce paint consumption and guarantee better adhesion to the wallpaper surface. You can use highly diluted wallpaper glue as a primer.
Painting is usually carried out first in hard-to-reach areas: corners, joints. For this it is better to use small brushes.

After processing the edges, you can paint over the main surface of the sheets with a roller. Even from working with brushes large sizes It is worth refusing to achieve uniform application of the composition and the absence of streaks. If you apply too much paint, you can remove the excess with a foam roller.
When painting, you need to grab adjacent sheets and not allow them to dry to avoid visible seams. It turns out that you have to complete the entire painting process indoors at one time.
To obtain better coverage and color saturation, experts recommend applying the paint in two layers. But before re-processing, the surface must be completely dry.

There are four methods of painting glass wallpaper to achieve different visual effects:

Application of borders. An excellent choice for finishing classic-style rooms with high ceilings. The main condition is that the pattern of the glass wallpaper above and below the curb matches. The material is applied after the main panels have been installed and are completely ready for further work. It is important to pay attention to the markings to get the most accurate result.
Stencil. Allows you to get original and unusual drawings on the walls. Perfect for decorating a bedroom or nursery. You can use blanks from stores or make a pattern yourself using masking tape.

Squeegee technology. Gives a unique shimmer or shimmer effect. Choose a basic tone, preferably deep and bright. Then apply a decorative composition with a glossy or metallic effect (you can choose from special varnishes). After this, remove the dye with a foam sponge. Decorative composition will remain only inside the relief and will give a beautiful shine.
Azure. On the dried base tone it is necessary to apply short transverse lines with azure using a flat brush. After 15-20 minutes, spread the composition over the entire surface with a rubber spatula. Visually it looks like a blurry picture. You get a unique decor.

Fiberglass wallpaper for painting is glued with special glue or PVA and its analogues. Regular wallpaper glue won't work, so don't try it. If this is your first experience, it is better to take a special composition, not in powder, but ready-made, in a bucket. Yes, it is more expensive, but the quality is guaranteed, gluing will be easier, and there will be fewer problems.

Common brands

They all have several different collections. Thanks to their high quality and many other advantages, these brands have long proven themselves exceptionally well, which has allowed them to gain high popularity in the market.

In addition to the brands mentioned above, it is necessary to note other brands that also strive to become leaders and take a worthy position in the market of goods for repair and construction. We are talking, first of all, about such wallpaper brands as Vitrulan, Nortex, Herringbone and Veterman. As you can guess from the name, a number of them are produced in European countries, but some are produced in Russia.

Glue brands

Cleo is an excellent option for high-quality glue

When talking about fiberglass-based wallpaper, we must not forget about what types of glue can be used when gluing them. As is the case with other types of rolled wallpaper, the most popular are manufacturers such as Cleo, Henkel, Methylane.

Attention! When choosing and purchasing glue, you must consult with specialists in advance. Besides. Be sure to ask a store representative or a construction hypermarket consultant to clarify what type of wallpaper a particular adhesive composition is intended for.

Painting technology

The installation process is practically no different from applying other wallpaper for painting:

First, the surface is treated with latex primer.
Then a special glue is diluted, intended for gluing fiberglass. Its quantity is calculated using a simple formula. Any roll of fiberglass wallpaper intended for painting is marked. The density of the canvas is not necessarily indicated. This figure (110 g/m2, for example) is multiplied by the number 2, and thirty is calculated from the resulting amount. 110x2-30=190 grams per square meter. Knowing this calculation formula, it is easy to understand how much glue to dilute.
They coat the walls with it.
Sheets of rolls are glued end-to-end to each other, so that the pattern on the two combined fragments matches.
After this, the fiberglass wallpaper must be left for a day. During this time, the glue will set and have time to dry well.

In the absence of certain experience, the desire to paste fiber wallpaper yourself may encounter certain difficulties. Very difficult to choose required quantity glue. If you apply it to the wall in insufficient quantities, fiberglass simply will not stick to the surface. Excessive amounts of glue will cause the canvases to ride on the wall and slide off it.

In order to avoid such problems, experts recommend that you always prime the surface to be treated and apply the adhesive composition to the wall exclusively with a roller, not a brush.

You won't be able to dismantle them yourself later. It is almost impossible to remove fiberglass from the wall. That is why the described material is chosen when it is necessary to make repairs, which is called forever.

To paint fiberglass wallpaper, craftsmen recommend using water-dispersion paints. But if you want to make the new coating more practical, one that can then be washed using cleaning products, then it is best to opt for acrylic paints. Another important circumstance is important to consider before gluing fiberglass wallpaper intended for painting. They are applied in two layers. The interval between two applications must be at least 12 hours.

In addition, when implementing the chosen stylistic concept, it is important to decide what shade should be on the walls: matte or glossy. In this case, it is necessary to solve the dilemma, taking into account the stylistic emphasis. For classics, matte shades of the pastel palette are good. Gloss is ideal for high-tech and art deco.

Note! The smaller the pattern on fiberglass wallpaper, the faster it will disappear under several layers of paint. Fiberglass with large ornaments can be repainted dozens of times without compromising the aesthetic component.

Fiberglass wallpaper intended for painting is a practical material; it is best used when it is necessary to make permanent repairs. The average service life of the described material is 30 years.

The technology for gluing glass wallpaper for painting consists of several successive stages. The list of works is as follows:

perform preparatory actions;
Glue fiberglass to walls or ceilings.

After pasting, the work area is painted.

Before gluing glass wallpaper for further painting, you should collect the working tools and required materials. Required tools and accessories:

scissors, paint knife;
level (or plumb line), construction pencil, tape measure;
roller with a long handle, brush;
several containers for glue and water;
plastic spatula and metal;
rags, sponge;
stepladder, stable chair or table.

To prepare the base you will need plaster or putty.

The glue can be in liquid (ready) form, or requiring dilution (powder). To do the job efficiently, you should glue the strips only using a composition intended for fiberglass. For example, you can use the following products:

Master Pro;
Oscar;
Northex;
Lakra or other.

When using dilutable adhesive, you should carefully follow the recommendations contained in the instructions on the package. The consistency of the solution must be strictly observed.

Some formulations have additives that:

accelerate drying;
increase resistance to moisture;
have antiseptic properties.

The preparation of walls for glass wallpaper is carried out in the following sequence:

completely dismantle the existing old decor;
remove dirt, screws, nails and other unnecessary elements;
using putty, fill up any existing defects;
when the base is dry, sand the surface with sandpaper;
apply finishing layers until the walls (ceiling) are completely leveled;
treat the created coating with a primer.

Gluing of canvases

Gluing glass wallpaper for painting is no different from working with typical varieties: vinyl, paper, non-woven. A special feature of the process is that the adhesive is applied only to the surface of the walls (ceiling). The cut strips are not lubricated.

When gluing to walls, proceed according to the following algorithm:

make markings on the base;
cut the canvas into fragments of the required length, depending on the height of the ceilings in the room, with a margin of 5 cm to 10 cm;
Apply glue evenly to the work surface using a roller, and hard to reach places use a brush;
according to the mark, lean the first strip against the wall;
smooth the fragment using a plastic spatula: all movements are carried out from the center line of the strip to its edges;
cut off excess material from above and below with a knife;
glue the next piece end-to-end;
In this way they cover the entire room;
Use a rag to remove any squeezed out excess glue.

Here's how to stick glass wallpaper in different ways in the corners:

the first strip is fixed in the corner (creating an overlap of about 10 cm on the other wall), and the next piece is glued with a three-centimeter overlap onto it, further cutting off the excess level with a knife;
glue the fragment (with a margin of up to 3 cm to the other plane) and cut off the excess along the corner line, and proceed in the same way with the strip of the other side.

When working in places with switches and sockets, turn off the power supply to the apartment or the corresponding internal lines. Then proceed like this:

dismantle covers of switches and sockets;
wallpaper is pasted on top of them;
holes of the required sizes are cut in the right places;
put the covers back on.

After the glass wallpaper has dried, it can be painted. Water-dispersion and water-emulsion paints serve these purposes.

During subsequent finishing, the question may arise: is it possible to glue regular wallpaper for glass wallpaper? The answer to this is yes, this is permissible, but only if there is no strong relief on their surface.

The quality of fixation and durability of the glued canvases are determined by which adhesive is chosen, because the composition must be purchased exactly suitable for fiberglass. In addition to knowing how to properly glue glass wallpaper, you also need to select the right paint. Using the appropriate dyes, you can, at your own request, repeatedly change the interior design of any room.

The description, varieties and characteristics of glass wallpaper are given in the video below.

Peculiarities

Glass wallpaper is a material that is obtained by heating glass at very high temperatures (more than 1000 degrees). After heating, thread-like fibers of various sizes are formed, which are woven into single webs. To impart increased strength characteristics, the surface is coated with a starch adhesive composition. This way the structure and shape of the wallpaper is fixed. This glass material contains quartz sand, limestone, dolomite and soda.

This type of finishing refers to roll materials. White glass wallpaper for painting is most often used. Fiberglass surfaces are best painted with latex or water-based paints.

The main thing to remember when gluing fiberglass wallpaper is that the entire surface of the base must be flat, as well as appropriately prepared (puttyed, primed).

General rules for gluing glass wallpaper:

The glue is applied not to the wallpaper, but to the surface to be pasted (use special glue for fiberglass).
Fiberglass wallpaper is glued end to end.
Pasting with glass wallpaper is carried out at room temperature and humidity not exceeding 75%.
There should be no drafts in the room while working with fiberglass and drying.
When pasting, a piece of wallpaper is pressed tightly to the surface, and the air is expelled from under it using a special spatula.
After gluing, the joints of fiberglass wallpaper are treated with a special roller for better adhesion to the surface.

Please note: for fiberglass wallpaper, the front side is always inside the roll.

Technical characteristics of glass wallpaper

When most people think about glass wallpaper, they imagine white rolls with an incomprehensible relief. There are actually two main types of fiberglass wallpaper:

Smooth canvases are made of sheet glass material of translucent color. The most common name is “cobweb”, which characterizes this species. Mainly used for ceiling decoration, since they do not have high density.
Textured. In this case, the density is high, the relief with various patterns is expressed. This type can be safely glued to walls.

First grade. The best quality high density wallpaper. They can be used for finishing both walls and ceilings. When selling premium quality wallpaper, rolls must have protective linings against damage during transportation.
Second grade. They have lower quality characteristics. Sold in polyethylene film.
Third grade. In this case, there may be a defect, manifested in defects in patterns and protruding fibers.

The color range of glass wallpaper determines its purpose:

First group – light wallpaper(white and beige), intended for painting.
The second group is represented by different shades of paintings. They can be used as a finishing touch.

There is an opinion that glass panels have a small selection of patterns. But modern technologies do not stand still. More common type roll materials with a small pattern. The textured pattern is repeated and standard, which is why it is in demand in the decoration of office premises. Patterns like “matting”, “herringbone”, “check” and other typical ones in combination with pastel tones of the walls do not irritate the eyes and do not distract during work, making it difficult to concentrate.

An important characteristic at the stage of choosing glass wallpaper, as well as other finishing materials, is their water resistance. Based on this indicator, three types of fiberglass materials can be distinguished.

Each type is indicated by its own marking on the roll:

One wave. Fabrics with a loose structure, virtually impossible to clean. You can treat them with a soft cloth without water.
Two waves. In this case, you can allow yourself to use a damp cloth or sponge when cleaning.
Three waves. The most durable wallpaper allows you to clean it with any household detergent.

Characteristics of glass wallpaper:

High density - ranging from 110 g/sq. m up to 220 g/sq. m.
Long service life (Manufacturers talk about using wallpaper for 30 years).
Eco-friendly and hypoallergenic. The manufacturing method and composition make it possible to safely use this finish in bedrooms and children's rooms.
Antistatic. The surface of the canvas is not electrified, and therefore does not attract dust. Therefore, the wallpaper will retain its original appearance longer.
Easy to maintain and clean.
Fiberglass is not susceptible to microorganisms. Mold and mildew with this finish will not be a problem even in conditions of high humidity.
No reaction to ultraviolet rays. The color does not change with prolonged exposure to the sun.
The dense structure allows you to paint the wallpaper in any color without fear of visible stains and visible defects.
Fire safety. Toxic impurities are not released during combustion.
Fiberglass wallpaper can be used under putty as a reinforcing mesh to level out slight curvature of walls.

All these positive properties of the material determine the logic of its use. At the same time, the price factor is important, but most buyers can afford various brands glass wallpaper.

Available for sale standard sizes rolls 1 wide and 25 meters long. They are quite lightweight, so they do not cause problems in transportation.

The service life of glass wallpaper is about three decades;
Since the canvases are intended for painting, wallpaper can be painted up to twenty times;
Roll size - 1.5 m × 1.25 m;
Do not accumulate static electricity;
They are famous for their fire-fighting properties, as well as high vapor permeability;
Such materials have reinforcing properties.

Standard sizes of fiberglass wallpaper: width - 1 meter, length per roll - 50 meters, density - from 100 g/sq. m. “Gossamer” has a lower density, which usually does not exceed 50 g/sq. m.
Currently, all fiberglass wallpaper produced is white. If desired, they can be painted in any shade.
The texture of glass wallpaper is different: from the popular small “matting” and “herringbone” to pronounced patterns. At the request of the customer, manufacturers can make an individual drawing, but such a whim will not be cheap.

The market for finishing materials does not stand still. It is constantly updated with new, modern materials. Wallpaper can be found everywhere. New varieties of them, for example, fiberglass, are increasingly finding their use during repairs. Before traditional types they have a number of advantages. Strong, wear-resistant, resistant to moisture and chemicals, durable material - that’s what glass wallpaper is. Their use, with further painting, is a beautiful in appearance, a practical option for finishing both walls and ceilings.

Glass wallpaper: material characteristics

Beginners in renovation work often have a question: fiberglass wallpaper - what is it? This concept means a material obtained from glass at a temperature of 1200 degrees. Threads of different thicknesses are pulled from it, which are then woven into fabric. It is then treated with glue made from starch (modified). This further increases strength and helps maintain the original shape.

The use of existing technologies makes it possible to obtain durable “webs” (in this case, light fibers are pressed onto a wet paper base) and fabrics with texture. Conventional looms produce designs reminiscent of geometric shapes (herringbones, diamonds, etc.), while jacquard looms produce more complex, sophisticated compositions. The variety of textures of products used for gluing increases the decorative properties of fiberglass.

The composition of the glass melt used includes the following components:

quartz sand;
lime;
dolomite;
soda.

Fiberglass is sold in rolls. Most often the products are white. When pasting is performed, the canvas becomes transparent.

smooth (otherwise they are called fiberglass, or “cobweb”);
embossed (a denser version).

Smooth glass wallpaper is used for:

leveling the walls for their subsequent painting;
reinforcing surfaces and hiding minor defects on them.

Using relief fabrics, the base is finished.

Using smooth and textured glass wallpaper, you can simultaneously reinforce the finishing layer (even a plastered surface), decorate walls and ceilings.

Advantages and disadvantages of fiberglass wallpaper

Pasting walls with glass wallpaper has its pros and cons. The first are summarized in the table below.

№	Advantages	Description
1	repeated painting	canvases can be painted up to 20 times with special compounds (the original texture is preserved), which increases the strength of the created decorative covering
2	non-flammability	when heated, the material does not ignite, toxic substances are also not released, which increases the degree of fire safety and allows use near fire sources (for example, in the kitchen)
3	moisture resistance	this allows you to wallpaper rooms with a high moisture content (bathrooms, toilets) with such wallpaper.
4	air permeability	helps maintain the natural microclimate indoors

The disadvantages include the following factors:

relatively high cost compared to others classic views wallpaper, much smaller range;
there is a possibility of difficulties arising when dismantling the created finishing coating;
low-quality products are fragile and can break right in your hands;
it is necessary to prepare the surface of the base almost perfectly in order to glue the strips;
When working with fiberglass, you must wear protective clothing because it is scratchy.

The distribution and scope of glass wallpaper are significantly influenced by advantages and disadvantages. The high price acts as a deterrent, but if you look into it in detail, many undeniable advantages lead to saving money.

Before gluing glass wallpaper for painting, you need to select it correctly. It is recommended to purchase quality products. The following simple manipulations will help you make your choice:

take a piece of wallpaper;
stick to the base;
paint;
then press it down with a spatula;
if the piece is not deformed, then the quality of the product is suitable.

If it is not possible to acquire a piece of the selected wallpaper, then you should purchase products from well-known brands. Today these are, for example, the following world-class companies:

Swedish “Johns Manville” with fiberglass wallpaper Wellton, Tassoglas, Oscar;
concern from Germany “Vitrulan Textilglas GmbH”, producing “Vitrulan”.

There is a misconception among non-professionals that the denser and thicker the canvas, the higher quality and better it is. But in fact, this is not true, because quite often product manufacturers use a lot of impregnating composition during processing. In this case, the drawing loses its clarity, because impregnation does not provide texture.

It should also be taken into account that papered walls may not look the same as the material looks in a roll. This is explained by the use of fluffy (wider) threads in some models of fiberglass wallpaper, which, when pressed, shrink and become flatter. The product loses its original shape and volume.

make markings on the base;
cut the canvas into fragments of the required length, depending on the height of the ceilings in the room, with a margin of 5 cm to 10 cm;
apply glue evenly to the work surface using a roller, and use a brush in hard-to-reach places;
according to the mark, lean the first strip against the wall;
smooth the fragment using a plastic spatula: all movements are carried out from the center line of the strip to its edges;
cut off excess material from above and below with a knife;
glue the next piece end-to-end;
In this way they cover the entire room;
Use a rag to remove any squeezed out excess glue.

Here's how to stick glass wallpaper in different ways in the corners:
the first strip is fixed in the corner (creating an overlap of about 10 cm on the other wall), and the next piece is glued with a three-centimeter overlap onto it, further cutting off the excess level with a knife;
glue the fragment (with a margin of up to 3 cm to the other plane) and cut off the excess along the corner line, and proceed in the same way with the strip of the other side.

When working in areas with switches and sockets, turn off the power supply to the apartment or the corresponding internal lines. Then proceed like this:
dismantle covers of switches and sockets;
wallpaper is pasted on top of them;
holes of the required sizes are cut in the right places;
put the covers back on.

After the glass wallpaper has dried, it can be painted. Water-dispersed and water-emulsion ones serve these purposes.

During subsequent finishing, the question may arise: is it possible to glue ordinary wallpaper onto glass wallpaper? The answer to this is yes, this is permissible, but only if there is no strong relief on their surface.
Fiberglass wallpaper for painting is glued only end-to-end. When gluing, there must be no drafts, and the temperature should be maintained in the range from +18 to +25 degrees. Required humidity level - no more than 70%

The quality of fixation and durability of the glued canvases are determined by which adhesive is chosen, because the composition must be purchased exactly suitable for fiberglass. In addition to knowing how to properly glue glass wallpaper, you also need to select the right paint. Using the appropriate dyes, you can, at your own request, repeatedly change the interior design of any room. Both gluing fiberglass wallpaper and painting it in the desired color is quite easy to do on your own. The help of a partner will not be superfluous and will significantly speed up the work.
The description, varieties and characteristics of glass wallpaper are given in the video below.
Practical recommendations for gluing fiberglass materials are given in the following video.

ABOUTgluing walls and ceilings with glass wallpaper for painting, taking into account compliance with the work technology, allowshow to decorate them and protect them from the effects of various destructive factors: high humidity, microorganisms, mechanical influences.

The market for finishing materials today is greater than ever. For interior wall decoration, you can choose whatever your heart desires. Today's article will be devoted to glass wallpaper, which has recently begun to be used especially often. From the article you will learn how to glue glass wallpaper for painting, as well as other nuances of this finishing material.

When choosing finishing materials for home rooms, you need to think through the entire design so that everything in the new interior looks harmonious and perfect. Remember that the right finish is half the success.

Today, many people prefer modern materials, which are characterized by more advantageous advantages, to standard types of finishing. Recently, glass wallpaper (brands Leroy Merlin and others) have become increasingly popular among the population. This is a modern type of finishing material, which contains substances used in glass production. This, in principle, is evident from the very name of the material.

To produce such an unusual finish, the following substances are used:

limestone;

dolomite;

quartz sand.

At high temperatures these components melt to form yarn. The production technology requires a temperature of +1200C. In this way, light and thin threads are formed from the hot mass. If you press them, you get a fiberglass web. It is used in construction as a fastening material. But glass wallpaper is made in a slightly different way. First, fiber is spun from the formed threads that were noted above. Then they are woven on a special loom, which vaguely resembles a weaving device. The result is rolls of cullet.

Previously, in the 30s of the last century, colored glass was used for the production of glass wallpaper. Somewhat later, a method for synthesizing them from glass and wool was discovered. The resulting products were characterized by excellent quality, which contributed to the popularization of this type of finishing to the current level.

In the interior, this material has a beautiful appearance due to the fact that it can be painted in different colors. We will tell you a little more about how to glue glass wallpaper for painting below.

Designers consider fiberglass wallpaper as the most interesting and practical material, perfect for interior wall decoration. On the walls they look especially presentable.

Some believe that there is only one option for glass wallpaper and they are all similar in appearance. But this is a misconception. Today there are two versions of this product:

Embossed. The material here has a denser structure, so it will be used correctly for finishing. It is also worth noting that it will be quite difficult or almost impossible to damage it or tear it during gluing. Such glass wallpapers have a wide range of relief patterns.

Smooth. They are characterized by a lower density, as well as an even texture, which is why they are popularly called “cobwebs”.

If you want to decorate walls or ceilings with such material, you should choose the right not only its type, but also its textured pattern, if any. With the correct gluing and painting technology, your walls and ceiling will have a chic look and will fit perfectly into any interior.

Advantages and disadvantages

Like any type of finishing work, the use of glass wallpaper has positive and negative aspects. You need to know them in order to assess whether it is worth using this type of finish or whether it is better to pay attention to other options.

The advantages of glass wallpaper (for example, Leroy Merlin) include the following points:

The material is environmentally friendly, since no toxic substances are used in its production process.

High fire safety of the finish. The sheets are not subject to combustion. Please note that when in contact with fire, glass wallpaper does not release toxic and toxic substances into the air that are harmful to human health.

The material does not accumulate static electricity, dust, or dirt. In addition, the sheets are absolutely hypoallergenic.

High moisture resistance. The material does not delaminate when exposed to moisture. Also, glass wallpaper does not swell.

Good breathability.

The surface is able to “breathe”.

No requirement for a smooth starting surface. This finish is great for masking small potholes and cracks.

The presence of a reinforcing effect. Thanks to it, glass wallpaper can be used to simultaneously strengthen the wall or ceiling surface of old structures.

They have high surface resistance to prolonged exposure to light.

Mold and mildew do not form under the finishing.

In addition, working with this material is very easy and even a beginner in the matter of gluing wallpaper on walls and ceilings can handle it.

It is also worth noting that glass wallpaper is an excellent surface for painting. Their surface can be repainted many times. As experts note, paint can be applied 15 to 25 times on one coating. Moreover, each layer of paint will not have a negative impact on the appearance of the walls and ceiling. Therefore, glass wallpaper is considered indispensable in the interior. For repeated painting, experts recommend choosing sheets with a clearly expressed relief pattern. This is due to the fact that the implicit design will gradually begin to wear off after several layers of paint, which will have a bad effect on the appearance of the entire interior as a whole.

It should be noted that such interior decoration looks very beautiful in combination with plasterboard ceilings. The main thing here is to choose the right style and other interior elements.

Another significant advantage of this product is its durability. This is the strongest finish that is used for interior decoration of residential and non-residential premises.

The service life of such a surface is approximately 30 years. Moreover, this parameter does not decrease with each new coloring.

The high mechanical resistance of the surface makes it relevant to use them in the interior of a children's room, living room, corridor and kitchen. In this case, the surface of the glued sheets can be cleaned from dirt and dust with a regular cloth. Can also be used for cleaning various means household chemicals.

If you are purchasing products famous manufacturers(for example, Leroy Merlin, etc.), then you will only get positive aspects. But, like any material, cullet has some disadvantages that can sometimes change the buyer’s decision.

The disadvantages of glass wallpaper, which are associated with low quality products, include the following:

risk of cracks appearing on sheets;

peeling off the material (this can also happen if the gluing technology is violated);

during the gluing process, the sheets may tear;

during operation, the appearance will begin to deteriorate after just two paintings;

uneven absorption of paint.

The disadvantages that are also typical for quality products include:

difficulties in removing the finish from the starting wall;

for gluing, you should use only special glue (ordinary wallpaper glue will not work in this situation);

there are a lot of fakes on the market (it is best to buy Leroy Merlin products);

It is necessary to use only certain types of paints.

For painting, latex and acrylic paints. Using other types of paints, you risk smearing or clogging the textured pattern, as well as making the structure more dense.

Disadvantages also include the high cost of products. Of course, with such an impressive list of advantages, the price of glass wallpaper will naturally be somewhat more expensive than other types of finishing materials. But not every person can afford to decorate the entire room with them. Therefore, glass wallpaper, although it is the most advantageous type of finishing, still cannot replace less impressive materials.

On the market building materials a wide range of paintings for every taste. The price of glass wallpaper per roll varies over a wide range, so everyone can find an option that suits them. You can find out and compare prices for various glass wallpaper options.

As you can see, in the situation with glass wallpaper there are both obvious advantages and disadvantages. At the same time, purchasing quality products and correct sticking sheets will help you avoid a lot of problems and make your interior unusual and beautiful.

How to glue wallpaper

In order for everything to be fine in your interior, and for the glass breakers to perform their functions as expected, you should stick them correctly. There is a whole gluing technology here. Therefore, answering the question “how to glue glass wallpaper for painting”, two words are indispensable.

The technology for gluing glass wallpaper includes several stages. It is important that each stage is carried out efficiently and in strict compliance with all requirements.

At the very beginning, preparation should be made. It involves the following actions:

It is necessary to dismantle the old finish (wallpaper, paint, etc.).

Large surface defects (cracks, potholes, etc.) should be filled with putty. Fiberglass wallpaper can only mask minor defects.

After all the finishing has been removed and the wall defects have been puttied, the entire working surface needs to be primed. This will strengthen the outer layer of the walls or ceiling. Please note that you can prime before applying putty. This will prevent the formation of defects in the future at this very place.

Preparation is completed by applying a primer after all defects have been eliminated. To increase the adhesion of the two surfaces, the primer should be applied in several layers.

After this, you can proceed to the second stage - preparing the glue. The evenness of the treated surface and the service life of the finish will depend on how well and correctly the adhesive composition was prepared.

Please note that the most common mistake at this stage is the use of glue for paper analogues.

In this situation, you cannot use adhesive mixtures for paper wallpaper for the reason that the density of glass wallpaper is much higher. Standard wallpaper glue will not be able to withstand the weight of such sheets, and they will very quickly lag behind the ceiling or wall surface.

For glass wallpaper, you should use a special glue, which finishing manufacturers produce as an addition. Please note that this glue can only be used for gluing glass wallpaper. Here you can use glue with colored pigment (for example, Oscar). It makes it possible to evaluate the uniformity of coating of the working surface with the adhesive composition.

You should also remember that the glue still needs to be prepared correctly. It is sold in powder form and prepared according to the special instructions indicated on the package. The dry mixture is diluted with water in a certain ratio and stirred until smooth.

In addition, it should be noted that there are types of glass wallpaper for which you do not need to purchase glue. They already contain an adhesive layer. To make them stick to the wall or ceiling, simply moisten this layer with water. You can learn about all the features of this product from the seller or from the information provided on the packaging.

Now that the preparation and preparation of the adhesive mixture is behind us, we proceed to the third and final stage - gluing the glass wallpaper. The technology procedure itself is practically no different from gluing paper wallpaper.

In order to properly glue glass wallpaper onto the prepared surface, you must remember the following nuances:

during work and after its completion, until the adhesive solution has completely dried, there should be no drafts in the room where the work was carried out;

gluing occurs at room temperature;

During gluing, the work surface should not be exposed to direct sunlight (curtains or blinds can be used to protect from the sun).

It is worth noting here that fiberglass may crumble during the gluing process. Therefore, to avoid excessive irritation of the skin of your hands and face, you will need additional equipment in this situation. To avoid unwanted effects from your body, gluing glass wallpaper is carried out in the following form:

clothing must have long sleeves and long legs;

You should wear socks on your feet and gloves on your hands;

To protect your eyes from small fragments, you should wear safety goggles on your face.

It should also be remembered that glass wallpaper, like other types of wallpaper, has a front and back side. In a roll, the front side is always on the inside. But at the same time, a special mark in the form of a gray or blue stripe is still placed on the reverse side.

The gluing process itself is as follows:

First, cut the roll into strips of the required length. Be sure to cut the strips in such a way that it is possible to compensate for losses due to the pattern (when using textured types).

We coat the walls with the prepared adhesive. The glue is applied only to the surface of the walls or ceiling, and not to the sheets. To apply it evenly, use a roller or brush.

We glue the strips end to end. This is the most important point, since the strips must touch each other without cracks or gaps.

After fixing the strip, you should go over it with a dry and clean roller to remove air and excess adhesive. Instead of a roller, you can use a clean special spatula. At the joints, the glue must be removed with a rag or sponge.

The described technology is applicable for gluing wallpaper on the ceiling or walls. If you did everything correctly, then glass wallpaper will last on the surface of the ceiling or walls for up to 30 years, even after repeated repainting.

Painting technology

The very last stage of putting the surface in order is painting the glass wallpaper. This process is completely doable with your own hands, and it does not require extensive knowledge. You just need to follow simple rules and recommendations, then your decoration will look great in any interior.

The technology for painting glass wallpaper, as well as gluing it, is practically no different from painting other types of surfaces.

The main difficulty here lies in the correct choice of paint. According to construction experts, the best option for painting this type of finishing material would be water-dispersed compositions in which acrylic resins are the binding element.

The advantages of such compositions include the following points:

do not hide the texture of the wallpaper;

retain all the qualities and properties of glass fiber;

are environmentally friendly products;

are resistant to open flames;

characterized by vapor permeability and moisture resistance.

It is worth noting that if you pursue the desire to passively create maximum fire protection in your home, then you should give preference to special acrylic fire-resistant paint. At the same time, you must not forget to treat all metal communications in the room with a special fire-resistant compound.

In addition to the properties described above, water-dispersion paints have the following advantages:

water is used as a solvent, so they are devoid of a sharp and unpleasant odor (such solutions have practically no odor);

quick drying of the painted surface;

paint can be applied by any means;

affordable price.

When choosing paint for glass wallpaper, you should give preference to washable types. This will help greatly simplify wet cleaning in the room and keep the appearance of the walls or ceiling beautiful for a longer period of time.

Detailed information about the properties of the paint is contained on its packaging.

Before direct painting, you need to apply a primer to the surface of the glass wallpaper, but not an ordinary one, but a special one. Its composition is similar to glue. The glue must be diluted with water. Priming at this stage will increase the adhesion of the coating to the paint, and will also allow you to significantly reduce the consumption of glue, which will not be absorbed into the finishing surface, but will be evenly distributed over it.

Remember that before priming you need to wait until the glass wallpaper is completely dry, and also remove any dust left over from its surface after gluing. Typically, dust removal is carried out in situations where the wallpaper has already served as a final finish for some time before painting. To remove dust from them, just walk over the entire working surface with a slightly damp cloth.

Now everything is ready for painting. This procedure is carried out as follows:

We prepare inventory. To apply paint, use a brush, roller or spray gun. The method of applying paint is determined by the tools you have in your home, as well as your desire. Most often, paint is applied to glass wallpaper using a roller.

Open the paint and stir it well until a uniform color is obtained.

Pour the coloring composition into a special tray and dip the roller into it.

After the roller is well saturated with paint, we place it on the raised area of the pallet and begin applying the coloring composition to the surface of the glass wallpaper.

Please note that the paint must be applied in a thin and even layer. It is best to paint the joints between the strips with a brush. The second coat of paint should be applied only after the first has completely dried. Several layers will allow you to obtain a uniform and rich color of the walls or ceiling.

At the same time as the walls and ceiling, the communications (heating radiators, etc.) should be painted.

As you can see, in many respects, glass wallpaper is a modern and most practical material that will allow you to quickly and effectively complete interior decoration. The key to the success of gluing and painting them is strict adherence to the instructions and rules, without which it will not be possible to properly glue the wallpaper and apply a finishing layer to it. Remember that with high-quality painting and the correct selection of paint, this process can be carried out many times.

Video “How to glue glass wallpaper”
Dmitry Ivanovich

Currently, the market offers a variety of materials for wall decoration. You can opt for paint, plaster, tiles, wallpaper. One of the modern coatings that deserves attention is glass wallpaper. They have long term services, ideal for painting, are available in a wide range of colors and types and are very practical to use. More and more buyers are choosing them.

Peculiarities

Fiberglass wallpaper is a decorative wall covering based on special glass. It is heated to high temperatures, and in this state the fibers are drawn out to form yarn, which can be different thicknesses and types. The yarn is subsequently woven into fabric.
Fiberglass wallpaper has a texture. Their front side looks like decorative weaving, which can be various types: diamonds, leaves, geometric shapes, abstract lines, flowers.

Fiberglass wallpaper is suitable for gluing various surfaces: concrete, plastic, metal, wood, plasterboard, brick, chipboard. The wall is first prepared - primed. If there are cracks, they must be sealed.
Thanks to glass fibers, such wallpapers last 20-30 years with proper use and care. They can be painted several times (up to 6 times) without compromising their appearance.
Currently, manufacturers are trying to produce fiberglass wallpaper with new functions, for example, magnetic or with additional sound absorption.

Advantages and disadvantages

Like any finishing coating, glass wallpaper has a number of disadvantages and advantages that need to be analyzed before making a choice in the store.
The advantages include several characteristics.
Strength. The material does not tear, does not deform, does not scratch. In addition, it is able to withstand wet cleaning, including the use of chemical cleaning agents. It is believed that this is the most durable wall covering that exists today.
Improving the indoor microclimate. The structure of the wallpaper resembles a knitted product - it consists of loops, which allows water vapor to move freely between them. Thanks to this, dust is not attracted to the wallpaper and static electricity does not accumulate.

Environmentally friendly, safe for others. The coating is based on glass, which does not harm people and does not allow dangerous microorganisms to multiply. Such wallpaper is an excellent preventative against the occurrence of fungus or mold, so glass fiber is not harmful to the health of others and is suitable for decorating rooms for children and people prone to allergies.
Resistance to mechanical damage. The canvas does not deform when in contact with furniture or human hands. If there is a need to replace a separate fragment, this can be done without difficulty; horizontal gluing can be used with fiberglass fabric.
Non-flammability. Thanks to the glass in the material, the wallpaper does not burn and does not emit harmful substances when in contact with fire.

Simplicity when gluing walls. No special skills are required when working with fiberglass wallpaper. They are easy to stick on yourself without inviting a specialist.
Long service life. With proper care and use, wallpaper can last up to 30 years.
Available in a wide range various types of colors, textures, patterns.

Other disadvantages of fiberglass fabric can be mentioned.
Price. The price of the canvas can reach large sizes, depending on the complexity of the texture and image.
When gluing walls, it is necessary to use special protective clothing. Wallpaper microparticles that come into contact with the skin can cause severe irritation and allergies.
To paint a wall covered with fiberglass, you need a large amount of paint due to the high degree of absorption of wallpaper.

When applying several layers of paint and glue, the wallpaper may begin to peel off from the wall under the influence of gravity.
With each new layer of paint, the texture and relief of the wallpaper is lost.
If the paint is incorrectly selected, the wallpaper may be difficult to wet clean.
Wallpaper is difficult to remove from walls. During subsequent repairs, a lot of effort must be made to prepare the wall for the new coating.
To work with them, you need a perfectly flat wall, since fiberglass does not bend well and cannot take any shape.

Despite several disadvantages, glass wallpaper is one of the most popular types of material for wall decoration both in Russia and in European countries.

Kinds

Depending on various criteria, glass wallpaper can be of different types.

Texture

Smooth. The wallpaper is a “cobweb” (fiberglass). They are an ideal surface for painting. In addition, the “cobweb” can smooth out small cracks and unevenness on the wall. It combines reinforcing and decorative functions.
Embossed. This material has a more porous structure, greater weight and density. It is less susceptible to stretching and deformation and is well suited for the final finishing of walls.

Quality

First grade. They are of high quality, long service life, very dense - from 100 g/sq.m. m. The price for such material is high.
Second grade. The quality is at an average level; during operation they can behave unpredictably. If you choose products from well-known foreign brands, the wallpaper will be of fairly high quality. The second grade will only indicate a non-standard length of the canvas.
Economy class variety. Wallpaper of low quality, with a short service life and low density. Despite this, they are the most popular option among buyers due to their reasonable cost.

Number of layers

Single-layer and double-layer, consisting of a decorative layer and a backing.

Method of use

Fiberglass wallpaper and “cobweb” for further painting. The canvas is white or light in color and is intended for further processing. Are a great option ceiling decoration. For walls, such wallpaper is used only as a rough draft.
Fiberglass, which requires further filling. Suitable for covering uneven surfaces.
Fiberglass wallpaper of various colors that does not require further coloring.

Color

Multi-colored and white or light with a slight tint. The latter are usually used for painting.

Drawing

Difficult. Made on a jacquard loom.
Textured. Made on a loom.

Moisture resistance

1st degree. The material is not very durable. You can only use dry cleaning with a suede cloth. Marked in one wave.
2 degrees. Average degree of moisture resistance, can be cleaned with a slightly damp cloth, marked with two waves.
3 degrees. High degree of moisture resistance. They can be subjected to wet cleaning, including the use of chemicals. Marked in three waves. If a brush is added to the marking, the wallpaper can be cleaned with a brush. This is the highest degree of strength and moisture resistance of wallpaper.

Compound

Only natural materials are used to make fiberglass, so the finished wallpaper does not emit harmful substances and has a long service life. In addition to glass, the composition of the canvas includes dolomite, soda, clay, quartz sand and lime.
First, all components are formed into briquettes, which are subsequently drawn into threads under the influence of high temperature. Fabric is woven from threads on looms. Then the canvas is impregnated with a special solution, the basis of which is modified starch. Thanks to this impregnation, the wallpaper first holds its shape before it is pasted, and then, mixed with glue and paint, it is firmly fixed to the surface.
After this, all fiberglass wallpaper is thoroughly checked for compliance with GOST R 52805-2007 standards.

Specifications

All characteristics of fiberglass fabric meet the highest requirements.
Environmental friendliness. All glass wallpapers undergo quality control; the concentration of harmful substances in their composition should not exceed permissible standards, according to SanPiN of the Russian Federation.
Density. The higher this indicator, the stronger the canvas, and the longer it will last. Nice wallpaper have a high density - from 100 g/sq. m. They are durable and can withstand several paintings. Wallpaper with a lower density is not as durable. It is not recommended to choose them for residential premises, since the fabric often has defects - threads that have come out of the weave, or a pattern that has gone astray.
Size. A standard roll is 1 m wide and 25-50 m long.

Whiteness must be at least 70%.
Vapor permeability. This indicator must be measured by the manufacturer and indicated on the packaging.
Parallelism of edges. The longitudinal edges of the wallpaper should be parallel to each other. The deviation cannot be more than 1 cm.
Integrity. The canvas cannot consist of component fragments, it must be integral.
Winding the fabric. The material should be wound tightly and the overhang should not exceed 1% of the roll width. The front side should be wound outward.
Presence of mechanical damage. The material must not have tears, wrinkles or other damage.

Combustibility, flammability, toxicity upon contact with fire, smoke formation. These indicators should not exceed the standards established by GOST 32044, 30402, 12.1.044.
Impregnation with a special composition. Unimpregnated areas should not exceed 3 cm.
Marking. All wallpaper must be labeled in accordance with the requirements in a form accessible to consumers.
Water resistance.
Strength and resistance to mechanical stress.

Color solutions

In order to decide on the color of the wallpaper, you first need to be guided by your own taste preferences.
However, there are some general tips to help you make a choice.
It is not recommended to choose too bright colors for painting. They quickly become boring, can cause irritation, and will interfere with rest and relaxation. It is better to give preference to neutral, calmer tones.
If you want to highlight the walls in an original way, add bright colors to the interior, it is better to highlight them with separate elements, for example, bright drawings on a neutral background of wallpaper. In this way you can achieve originality of the room, as well as make it visually larger.
It is important to pay attention to the combination of wallpaper with furniture in the room. They should complement each other in color, patterns and style.

If you plan to apply designs to glass wallpaper, you must comply harmonious proportions depending on the size of the room. Large details contribute to the visual reduction of space, which is inappropriate in small rooms. A small pattern, on the contrary, is suitable for small room and will help make it more spacious.
It is important to keep in mind what purpose the room itself has, and how harmoniously wallpaper in a particular color will look in it. For the kitchen, colors should not be too bright, dirty, or gloomy. If there is enough natural light, you can choose cool shades: green, blue, gray. If you need to add light to the kitchen, it is better to give preference to warm colors: yellow, pink, orange.

For living rooms, shades found in nature are suitable: green, pink, yellow. To add originality, you can use stencils to add colored patterns to the walls to suit your taste. For bedrooms, calm colors are suitable that will help you relax and unwind: beige, blue, light green, pink.
Using different textures and colors, you can highlight one of the walls and divide the room into zones. Interesting solution– choice for different walls of the same pattern, but different in size.

Textures and patterns

Fiberglass wallpaper can have different textures. The most common ones include the following.
"Herringbone"– classic design, suitable for decorating any room, can be of different sizes. A large herringbone will be an excellent option for a spacious room.
"Rhombus". Suitable for connoisseurs geometric shapes and straight lines. This pattern will organically fit into the interior of the kitchen, dining room, and hallway.

"Goshka". The wallpaper has the same texture on both sides and can be hung on horizontal and vertical surfaces. There are small, medium and large “matting”. This texture, in addition to being decorative, also performs reinforcing functions. This option is very popular in office spaces.
"Cobweb"– classic, chaotic, abstract design. When applying paint, the texture becomes almost invisible, but not smooth, which makes it ideal for decorating the ceiling. Wallpaper with this pattern does not need to be adjusted.

There are also exclusive models with unusual texture.
Crepe pattern. The pattern resembles jacquard weaving with a chaotically located fine texture. If a layer of paint is applied to the wallpaper, they visually resemble relief plaster, which creates a play of light and shadow on the surface.
"Papyrus". Outwardly, it resembles ancient paper with ornaments and creates a unique atmosphere of comfort.

Stripes. These include “Empire”, “Modern” and “Stripe” patterns. They all represent a beautiful intersection of stripes. "Stripe" is suitable for original people who love unique interior. The pattern is an alternation of small and large stripes.
"Vertical". The texture is unobtrusive, discreet. Such wallpaper can be chosen for a room of any size and purpose.
"Deruzhka." This pattern will organically fit into the country style, chalet, and is suitable for a house on a summer cottage. Large relief resembles natural bamboo or linen weaving, like mats. Thanks to this, a comfortable and cozy atmosphere is created in the room.

In addition to the above patterns, there are many more options offered by manufacturers: “chess” and “quad”, which are a combination of squares, “polka dots”, suitable for rooms with children, “diagonal”, used in rooms where it is necessary to visually adjust the geometry of the space.

The pattern can be of different sizes, which gives variety for creative ideas. When purchasing wallpaper for painting, you must take into account that with each new layer of paint the texture will gradually lose its relief, so it is more practical to choose a pronounced, deep texture.

Using various techniques for painting fiberglass wallpaper, you can diversify the interior and make it original.
Application of borders. Using them you can divide the surface into several parts. The texture may be the same, or it may differ on different sides of the curb. After gluing the fiberglass wallpaper to the wall, without waiting for it to dry, you can proceed to the next step. A strip is cut out on the canvas that will correspond to the future border. The remaining canvas on both sides of this strip is painted in two layers. An interesting solution is the use of contrasting colors. After the paint has dried, a border is glued to the designated area.

Using stencils. With their help you can create any drawings and patterns on the wall. A stencil is applied to the already painted wallpaper, its borders are secured with masking tape. Then the paint is carefully applied so that it does not flow under the tape. Then the wallpaper is painted again, and after the paint layer has dried, the tape is removed. The finished ornament can be further decorated or supplemented with another ornament using another stencil. In this way, you can create patterns dispersed over the entire surface of the wall, or limit yourself to a single pattern.

Squeegee staining. It creates the effect of a fabric surface. To begin with, the fiberglass fabric is painted with a base color, on top of which a paint coating of the same color scheme is applied using a rubber or plastic spatula. This painting can be done with a water-based varnish or a varnish with a metallic effect. After the top layer has dried, remove excess with a damp sponge.

Painting with azure. To do this, first apply a base layer of paint in the form of varnish from a mixture of contrasting colors with decorative inclusions white. After this layer has dried, glaze is applied. A special brush is used for this. Movements during paint application should be short, in a transverse direction. After 20 minutes, using a rubber spatula, the flakes must be evenly distributed on the canvas. A brighter effect can be achieved by applying another layer of glaze.

Review of products of popular brands

Based on reviews from satisfied customers, in today's market there are several leaders among manufacturers of fiberglass wallpaper, which produce high-quality products and are the most popular among consumers.
Welton. The Swedish company is a team of professionals, one of the long-established leaders in the production of glass wallpaper. Products of this brand can be found in all developed countries of the world. In addition to wallpaper, the assortment of this brand includes all related products for wallpapering. Fiberglass wallpaper is presented in three collections: Classic, Optima, Decor. The first option is manufactured at a factory in Sweden and can have a variety of textures, densities, and roll lengths. The second and third options are produced at a factory in China and have a lower cost.

Vitrulan. A German company that initially appeared on the market as a manufacturer of glass and then glass wool. Currently, the plant produces high-quality glass wallpaper and offers a wide selection of different collections to suit every taste.

Nortex - Russia. The company has factories in China and the Czech Republic. The products are presented in a wide selection and have affordable prices suitable for the Russian buyer.

Tassoglass - America. High-quality products at a price suitable for people of average living standards.

X Glass – Russia, the plant is located in Finland and offers mid-priced products.

Bau Master, Waltex, Veterman, Mermet – China. The wallpaper is different good quality and inexpensive prices.

How to choose?

When deciding what wallpaper to buy, you can follow a few tips.
The main indicator of the quality of glass wallpaper is its density. You need to be careful, as sometimes unscrupulous manufacturers can add starch impregnation to increase this indicator. It is almost impossible to determine this at first glance, because the wallpaper is packaged in rolls. This can become noticeable only at the gluing stage, when the glue is applied and the starch layer dissolves. Therefore, it is better to give preference to well-known brands.
Texture. This indicator can also be artificially changed. Some manufacturers fluff the threads, which makes the texture more voluminous. This is discovered only during the process of gluing the canvas to the surface, when excess air is expelled using a spatula.

You can determine in advance whether the material meets the declared characteristics. To do this, you can take a small piece of wallpaper as a sample, stick it on the wall, paint it and see if its properties have changed.
When choosing paint, you need to understand how often the surface will be exposed and how often cleaning will be carried out. It is better to give preference to latex glossy and semi-gloss paints. In rooms with high traffic levels, it is better to choose paint with a water-resistant effect that will not wear off.
When choosing wallpaper for the ceiling, it is better to give preference to cobwebs, which do not have relief or texture. In this case, there is no need to adjust the drawing. In addition, fiberglass has reinforcing properties, which will make the surface perfectly smooth.

For the ceiling, you can choose second-grade material. Such glass wallpapers are lighter in weight, which will simplify the procedure for gluing them, and the ceiling is not subject to frequent mechanical stress and rarely gets dirty, allowing you to save on material. For walls, first-class wallpaper with the best quality characteristics. To determine the type of wallpaper, you need to pay attention to how many meters there are in a roll. If 15 is wallpaper of the second grade, if 50 is of the first grade.
Fiberglass wallpaper can be chosen for any room. Due to their properties of strength, durability, and resistance to mechanical stress, they are suitable for rooms with high traffic volumes: for the hallway, children's room or any other room. Resistance to frequent wet cleaning, including the use of chemicals, makes them an ideal coating for kitchen and bathroom walls, and non-flammability and non-toxicity allows them to be used as a decorative coating for a stove.

To determine how much material is required, you need to know the length and width of the surface. In addition, you need to take into account that joining the pattern will require 5-10 cm of allowance for each cut piece.

If the length of a whole roll is 50 m, and the height of the ceilings is 2.5 m, you need to calculate that approximately 2 additional meters will be taken from each roll for allowances.

Instructions for use

Fiberglass wallpaper can be used to cover wooden, metal, concrete and brick surfaces, as well as walls made of plasterboard and chipboard.
You need to glue the wallpaper following the order of the main steps.
Surface preparation. Large cracks and uneven areas must be repaired. To do this, the wall is puttied and primed using a weak glue solution.
Applying glue directly to the wall, and not to the wallpaper. The glue chosen is special. Its basis is starch and PVA, and the consistency should be thick.

Gluing wallpaper. This is done end to end. It is important to observe the combination of the pattern. To do this, when cutting the required length from the roll, you need to make an allowance of about 5 cm to fit the canvas. If glass wallpaper with a “matting” or “cobweb” texture is used, allowances will not be required. When working with fiberglass wallpaper, horizontal joints are allowed, which can be used if there are incorrectly cut pieces or remnants from rolls. To determine which side is the front (the texture of the wallpaper is the same on both sides), many factories mark it with a gray stripe.
Apply paint (if necessary) in two layers two days after gluing. The time between application of layers is at least 12 hours.

It is important to ensure that there is no excess paint and glue, as due to excessive weight wallpaper may peel off the wall. To do this, you can cover the wallpaper with a layer of diluted glue before applying paint. This way the canvas will not absorb excess paint.

After painting, you need to let the wallpaper dry, protecting it from sunlight and draft;
for painting, it is better to choose a roller with a high pile so that the pronounced relief is painted over well, although the “cobweb” or “matting” can be painted over with a regular roller;
It is better to paint only in natural light;
to paint the wallpaper near the baseboard or other parts, you can use a small brush;
When gluing wallpaper, it is better that the room temperature is 18-25 degrees and the humidity is about 79%.

Beautiful examples in the interior

Currently, glass wallpaper is increasingly used for the renovation of houses and apartments. With their help, you can improve any room, give it uniqueness and originality, using safe and high-quality materials.

Fiberglass wallpaper can be pastel shades, which will pacify and soothe, but it can also be bright accent for the entire interior.

For many people who carry out renovation work on their own, wallpaper is the favorite material for finishing walls. Their beauty lies in the fact that the material is affordable, easy to install and is available for sale in a wide range, which is constantly being updated.

In recent years, on store shelves you can see thick white or cream rolls of a not very remarkable appearance at first glance. The label says it's glass wallpaper. It cannot yet be said that there is great demand for them - the consumer has not yet fully appreciated the advantages and capabilities of this material. Therefore, it makes sense to take a closer look at it.

Composition and types

Don't think that there is an inaccuracy in the name of the new wallpaper. Everything is accurate: wallpaper is made from glass threads held together with a stabilizing impregnation.

For the production of threads, exclusively natural components are used:

dolomite;

quartz sand;

lime;

soda.

Therefore, from the point of view of the impact on human health, the material is absolutely safe.

The production process is as follows:

The components are mixed and melted at high temperature.

Then, using special equipment, threads of various thicknesses and types are drawn from the melt.

The next step is to make woven fabric from them.

At the final stage, the canvas is impregnated with a fixing composition.

Canvases can be smooth, textured and even embossed.

Most types of glass panels are manufactured by European manufacturers who take the quality of their products seriously.

They can be classified according to a number of characteristics:

by density;

by type;

by color;

according to the pattern of the canvas;

according to the degree of water resistance;

if possible, coloring;

by method of use.

If we talk about density, then wallpapers are divided into 3 categories:

The first grade is high quality wallpaper. The density of the webs is high, the roll packaging is protected on the sides by plugs.

The second grade is lower quality and less dense wallpaper. Usually packed in polyethylene.

Non-standard - the quality of the canvases is noticeably lower, there are defects (threads stick out, the design is knocked down in places).

When choosing wallpaper, pay attention to their density.

If the material is intended for wall finishing, then its minimum density should be at least 100 g/sq. m.

By type, the material can be divided into 2 groups:

Smooth wallpaper (fiberglass, fiberglass) - are thin translucent sheets, somewhat reminiscent of blotter in appearance. The density of such canvases is low, the texture is even. In a professional environment, these canvases are called “cobwebs”. Most often they are used as ceiling wallpaper.

Embossed wallpaper - the structure is dense, a three-dimensional pattern is clearly visible. The fabrics are durable.

Based on color, the material is also divided into 2 types:

White or light beige wallpaper is usually intended for painting.

Colored glass wallpaper is the final layer of wall decoration.

Depending on the pattern of the canvas, there are wallpapers:

textured - usually the texture of the canvas is fine, representing a repeating pattern. They are woven on a regular loom;

complex - can have a large three-dimensional pattern. For their production, special jacquard machines are used.

There are 3 types of glass wallpaper with different water resistance:

The rolls are marked in the form of a single wave - this is fragile wallpaper that can be cleaned of dirt only by lightly (without pressure) rubbing with suede.

The two wave marking means that the material is of medium water resistance and can be cleaned with a slightly damp soft cloth.

Three waves mean that the wallpaper has a high degree of water resistance and can be cleaned using detergents. And if the marking also includes a brush, then the wallpaper is considered heavy-duty.

Depending on the possibility of coloring, wallpapers are divided into:

smooth – not intended for painting;

embossed - with the possibility of painting.

If we talk about methods of use, fiberglass can be divided into the following categories:

Fiberglass “for putty” - used to level surfaces with minor defects.

Paintable spider web - can be used for both ceilings and walls. Not suitable for wet rooms - except as a rough finish.

Colored glass wallpaper - used to decorate surfaces without painting.

Paintable wallpaper.

Liquid glass wallpaper made from fiberglass in various colors. Apply similarly to conventional liquid wallpaper. Their main advantage is the absence of seams on the surface being finished. Not recommended for use in rooms with high humidity.

Advantages and disadvantages

If a private Russian consumer Has not yet fully appreciated this finishing material, then professional builders and designers give it a high rating.

This is due to the large number of positive properties of this type of wallpaper:

The material has a fairly high density (110-220 g/sq. m), ensuring its durability - on average about 30 years.

High whiteness of wallpaper for painting, allowing you to tint it in any color.

Possibility of repeated repainting of surfaces finished with glass wallpaper (provided they are of high quality).

The wallpaper is safe for health and hypoallergenic, so it can even be used in children's rooms.

The material does not attract dust, does not fade, does not contribute to the formation of colonies of fungus and mold, and allows air to pass through.

Can be used as a reinforcing layer.

The material is fireproof and does not emit harmful substances when heated.

Despite the high cost of high-quality glass wallpaper, the material of the middle price class is quite affordable for all segments of the population.

If you need to remove glass wallpaper from the walls, it will be very difficult to do so.

When using wallpaper of low quality, its texture may become smooth after the first painting.

When cutting wallpaper, there is a high probability that the fiberglass will crumble, so you will have to work in protective clothing, a mask and goggles.

To paint the walls you will need more paint than usual - this is due to the textured surface.

If the work is carried out by hired specialists, then finishing the surfaces will cost more, since it includes two stages - installing wallpaper and painting it.

You need to purchase glass wallpaper in a specialized store, since in unreliable retail outlets there is a high probability of stumbling upon a fake.

Which is fraught with troubles such as:

cracks appear as the wallpaper dries;

peeling of material from the surface;

rupture of panels during installation;

uneven absorption of paint, which leads to the appearance of spots of different color saturation;

loss of appearance after the second painting.

To apply wallpaper you need to use special glue; regular wallpaper glue will not work.

In order for the finished walls to retain their original appearance for a long time, the choice of paint must be taken very seriously.

We must proceed from the following considerations:

type of room where glass wallpaper is glued;

how often the surface of the wallpaper will be exposed to mechanical influences - touching, friction;

How often will you have to clean the wallpaper from possible dirt?

If we talk about the quality of paint, experts recommend using water-based compounds. They are dispersions of synthetic polymers and are produced in the form liquid paste or have a creamy consistency. Immediately before painting the wallpaper, they are diluted with water. When water evaporates, the particles of the binder connect with each other and form a dense protective film on the surface.

Water-based paints are non-flammable, almost odorless, easy to apply to wallpaper, absorb well, and are environmentally friendly.

The compositions used for decorating fiberglass are divided into the following types:

Based on styrene-butadiene dispersion, the paints have high water resistance, but tend to quickly acquire a yellowish tint. Therefore, you should not use them in rooms where there is often sun.

Based on polyvinyl acetate dispersion - a composition with low water resistance. Is the cheapest of all. Used only for dry rooms.

Based on acrylic dispersion - almost universal compositions. They have high water resistance, are not afraid of ultraviolet radiation, have good abrasion resistance, are durable, and dry quickly. Painted surfaces can be washed. But the cost of these paints is the highest.

The painting technology is simple, but requires some skill:

You can paint glass wallpaper only after the glue used during installation has completely dried. Therefore, you need to wait at least a day, and if you can wait, then longer.

Since the wallpaper has a pronounced relief, it is better to use a roller with a fairly long pile or a spray gun. You will also need narrow flat brushes (flat brushes) for painting the corners. It is also advisable to have a foam roller - it is convenient for removing excess paint from the surface of the wallpaper.

The room must be pre-prepared: the floor is covered with film, radiators, cornices and baseboards are closed or sealed with masking tape.

The surface of the wallpaper must be primed with diluted wallpaper glue and dried. This will improve surface adhesion before applying paint.

The painting process itself usually begins from the corners of the room, the upper and lower sections of the walls. They are painted with flute. You should not carry out work around the entire perimeter of the room. It's better to break it up into sections.

After the boundaries of the area are painted with a brush, you need to treat the rest of the surface with a roller, carefully picking up the already painted stripes. Do not forget to remove excess paint from the relief using a foam roller. During work, it is necessary to observe the “wet edge” principle - the next strip of paint should overlap the previous one while it is still wet. Otherwise, the intersection boundaries will be visible. To avoid the occurrence of defects (the paint is absorbed quickly), you will not have to rest until the entire wall is painted.

After all the walls are painted, you need to leave them to dry for at least 12 hours and then paint them again.

You need to choose a paint composition based on the purpose of the room.

It is better to paint a children's room, hallway and corridor with an acrylic-based composition, since these rooms experience the greatest load.

Acrylic paint can be tinted well and withstands washing well.

The living room can be finished with water-based paint, since the walls here do not experience strong impacts. If the wallpaper has a pronounced relief, then it is better to use latex-based paint.

The kitchen is a place where there is a high probability of walls getting dirty, so you will have to wash and repaint them often. And since each coloring smoothes out the pattern, choose wallpaper with a deep texture. Acrylic paint is also the best option here.

Toilet and bathroom - high humidity and the need to frequently wipe the walls require the use of a waterproof composition. Acrylic would also be ideal. But you can also use styrene-butadiene paint, since it also tolerates moisture well. At the same time, there is no sun in the bathroom, and the lights there only turn on for a short time, so the paint will not have the opportunity to turn yellow. But it is much cheaper than acrylic.

Possibility of use

If you decide to use fiberglass in the interior of your home, you will not go wrong. This material can be used for finishing any premises: living rooms, kitchens, corridors, bathrooms.

Although tiles are considered the best finishing material for a bathroom, glass wallpaper can also be used successfully. The only condition is that the wallpaper, glue and paint must be of high quality. Then they will well tolerate both moisture and temperature changes characteristic of the bathroom microclimate. But there are so many design possibilities! You can choose the color that appeals to you most, and then, if you want, you can easily change it to another. Agree, this number will not work with tiles.

The general rules for using fiberglass wallpaper are the same as for regular ones:

Do not use wallpaper with large textured patterns in small rooms - they will visually make the room smaller.

Paint the walls according to general rules using certain tones for rooms facing different sides of the world.

IN low rooms It is better to use wallpaper with a narrow vertical repeating pattern - this will make the ceiling higher.

Use the opportunity to highlight individual areas in the room by painting them in different tones of the same color or even contrasting colors. In this regard, the possibilities of glass wallpaper are limited only by your imagination.

Photo gallery