How to make chandeliers with your own hands. DIY chandelier: master class on making

Find out how to make a lamp out of wire and mesh so that flowers can grow inside it. How to turn a snag into a lamp, and tree branches into a floor lamp?

How to make an original lamp?

Very interesting designer item comes from the most simple materials, most of which remains from the picnic. If you go out with friends or family, you definitely need to clean up the trash after you. This not always desirable task will be made more enjoyable if you ask to stack the plastic spoons separately. If you have children with you, arrange a competition to see who can throw the most spoons and the fastest into a separate trash bag or bag.

You will also need water cans. After a fun picnic, when you arrive home, after some time, you can make original lamps from the containers left over after the feast. Give them to friends, keep them for yourself to hang in the hallway, kitchen or garden.

So, here’s how to create such a chandelier with your own hands or with the help of your family. First put next to each other:

• 5-liter oval-shaped plastic bottle;
• disposable plastic spoons;
• cable with socket and plug;
• low power LED light bulb;
• pliers;
• glue gun;
• screwdriver;
• stationery knife.

To prevent such original lamps from leading to a fire, take an LED rather than a regular Ilyich light bulb.

For information: 4–5 W LED light bulbs correspond to 40 W, and 8–10 W correspond to 60 W of conventional electric ones.

Carefully, so as not to cut yourself, remove the bottom of the canister with a knife.

Also, observing safety precautions to avoid injury, cut off the handles of each plastic spoon completely. Apply a little hot glue from a gun to the cut edges of the “blades” and glue them to the bottom tier of the bottle. Usually 17 pieces go here. Then, overlapping, attach the second and subsequent rows, arranging the elements in a checkerboard pattern.

To cover the neck, glue 10-12 spoon blades together, forming them into a ring.

Pass the socket with the light bulb and cable through the cut bottom hole in the bottle. If this "electrical" part is a problem for women, call your husband. If you don't have one, buy a cable from a hardware store with a socket and plug already screwed to it. You can borrow this working part old lamp.

Place a “ring” of spoons on the top of the canister and screw on the lid. To do this, let your husband drill a hole in it with a drill, and you yourself can do this manipulation with a hot nail or self-tapping screw, holding it with pliers. The original lamp is ready.

3 models of designer lampshades with your own hands

Ideas are in the air. If you are at the dacha and don’t have this piece of furniture there, it’s easy to make it yourself from what you have on hand. Take:

• hollow dishes;
• wire;
• polyurethane foam;
• gloves;
• paint;
• brush;
• pliers.

You can use unexpected things as a base: an old saucepan, a flowerpot, an already unnecessary children's potty.

Turn any of these auxiliary items over and place them upside down on a flat surface. Wind the wire, its turns repeat the shape of the future product, they should be the same as the lampshade. With your own hands, but wearing gloves, take the can in your hands, squeeze the foam out of it little by little onto the frame, covering the wire, let it dry.

After this, use a knife to make the contours more even, cutting off the excess. Paint it in your favorite color, white looks airy and elegant. Such a lampshade, made with your own hands, will decorate a summerhouse. You can make a few and hang them here. By avoiding big expenses, this way you decorate the space.

This lampshade looks stylish and modern, while the next one has classic look. For it use:

• thick wire;
• pliers;
• small plastic bottle of water.

Let's start making a lampshade with our own hands by making the top central element. To do this, wind 1 turn of wire onto the bottle, remove it, cut off the excess, twist the ends to make a ring. Its diameter should be such that the cartridge can be threaded through from below, and it will stay on the ring and not come out through the top.

Now roll the wire into a large outer ring. We will fasten it. To do this, cut 4 identical pieces of wire with pliers, secure the first end of each to the small ring, and the second edge to the large ring. Top part the lamp is ready.

The dimensions of the lampshade depend on whether it is being made for hanging from the ceiling or for a table lamp. The first one is larger than the second one.

Roll the bottom ring from the wire; it is the largest. Connect it to the second top five pieces of wire, distributing them evenly. All that remains is to decorate the frame of the lampshade. To do this, pass the wire through the second ring, curling it into waves and twisting it through the base. Also design the second ring.

All that remains is to cover it with fabric. Attach a flap from the second top to the bottom ring, cut to size, adding to the seam. Trim the large sides of the resulting rectangle. Sew the fabric on the side directly on the frame, decorating this place with braid. That's it, you've made a wonderful lampshade with your own hands.

If you want to see for yourself modern ideas on this topic - please! IN in capable hands And construction mesh will turn into a stylish lampshade.

With your own hands or by calling a man, cut a rectangle from it with metal scissors. To secure the socket, twist a circle out of wire and secure it on top of the lamp with four pieces of wire.

If you don't have coarse mesh, use pliers to trim off the excess sections to create more space between the wire strips. Paint the lampshade and the frame is ready.

And now the magic begins. You can make an original lamp that will benefit not only people, but also plants. Attach a flower pot with a flower at the bottom of the lampshade. You can tie it, woven using the macrame technique, to the lower turns of the wire with a thick rope. Check that the fastening is secure.

If there is a man in the house and welding machine, call on this tandem to make a metal ring with “rays” that need to be welded to the bottom of the lamp.

If you have a indoor climbing plant, such as ivy, thread its vines between the meshes of the lattice. The original lamp will become a house for a flower. It is better not to use ordinary light bulbs, as they are very hot and can burn plant leaves. In addition, the air around the flowers will be too hot. Screw in an LED or fluorescent light bulb.

For such an original lamp, you needed:

• construction mesh or strong wire;
• brush and paint (optional);
• pliers;
• light bulb with socket;
• flower.

You can secure cups with seedlings well on such a lampshade, thereby finding extra bed for its cultivation and conditions for lighting in the evening.

We make a floor lamp and a table lamp with our own hands

While walking in the forest, do not pass by a florid piece of driftwood lying around. Put it in a bag and take it with you. Wash it at home, if there is bark, peel it off with a knife. Sand the surface with fine sandpaper if necessary. Coat with wood varnish.

In order for the table lamp to hold well, the driftwood must be screwed to a durable pedestal with self-tapping screws. It should be quite heavy. Oak is suitable for it. If you find a broken branch of this tree in the same forest, saw off a circle 5–7 cm thick from the thick part.

It will also need to be sanded and varnished. When these wooden blanks dry, connect them with self-tapping screws of sufficient length, first passing them through an oak stand, and then plunging them into a piece of driftwood. You can also use bolts and nuts.

You already know how to make a lampshade with your own hands. Therefore, make it and attach it to the driftwood, wrapping it with wire.

If the old floor lamp stand is no longer pleasing or you just want to decorate it, also use wood for this. Look how good the birch stands look. Attach a branch of this tree to the lamp and see what kind of floor lamp you could make with your own hands.

How to crochet a lampshade?

If you are tired of the old floor lamp, you can transform it with your own hands, giving it a “zest”. Take the openwork braid and sew it onto the top and bottom of the fabric lampshade. You can decorate with glitter by gluing them in the form of a pattern, evenly or randomly.

A floor lamp or chandelier will turn out unique if you knit a lampshade for it with your own hands. This can be done with crochet or thin knitting needles. For the first option, you will need:

• hook;
• cotton threads;
• pattern for knitting napkins;
• water;
• starch;
• ribbons.

You can use, for example, this pattern for a napkin.

Measure the top circumference of the lampshade, we need its diameter. Knit a chain from air loops. Next, knit in the round, based on the napkin pattern. Measure the height of the lampshade and the diameter of its bottom circle. Based on this data, draw a trapezoid or rectangle (depending on the shape of the lampshade). Crochet this figure. Sew to the side.

Using single crochets, tie the top circle of the lamp and this trapezoidal or rectangular part.

Boil a glass of water, stirring, pour in 200 ml cold water, in which 1.5 tbsp is diluted. l starch. Boil for 1 minute, remove from heat, cool. Place a knitted lampshade here, wet it well, then wring it out, let the water drain, and the fabric will dry, but remain slightly damp.

Place it on the lampshade. To ensure that the knitted lampshade holds well, you can pass several ribbons or ribbons between the loops and tie them.

Lampshades look very beautiful if they are decorated with crocheted flowers.

A solution of starch or PVA will help give the shape of a knitted lampshade. Place it on the frame, apply glue, and let dry.

In the second case (when knitting needles are used), you need to make calculations for knitting, draw a pattern based on the measurements of the lamp, and knit a trapezoidal or rectangular lampshade. Similar models Suitable for floor lamps, chandeliers of strict shape. If you need to crochet a semicircular lampshade, first make wedges and then connect them with single crochets.

Here is another openwork chandelier. It’s nice to make muslin with your own hands and decorate the bottom of the product in a circle. But first you need to create the lampshade itself. The crochet pattern for this beautiful thing is presented right there.

On bedside table A table lamp will look amazing if it has a lampshade like this, the knitting pattern for which is also given.

If your son or daughter won’t let you finish your work, demanding your attention, invite the children to make a lampshade too, and let them roll strips of paper into tubes with their own hands. It's better to wrap them on a thin pencil, go to wooden stick for sushi, and then glue the free edge so that it does not unfold.

Now you need to glue the resulting blanks, using an object of a suitable shape as a frame, for example, a 5-liter canister. Having done the first inner layer, let the child move on to the second. There should be several of them to close the gaps. When the PVA dries, cover with this lampshade table lamp or hang it from the ceiling. It looks original and extravagant.

If you are interested in other ideas on this topic, watch the video:

A very interesting version of a lamp made from disks:

When starting to arrange an interior space, it is important to think through every little detail. After all, we all subconsciously strive for comfort and it is the smallest details that can create a special atmosphere, convey the general idea, mood and character of the room. Professional designers claim, and interiors clearly prove, that the right choice of chandelier can not only decorate the interior of a room, but also make life brighter and more fun. Beautiful lampshades for chandeliers with an original design give special grace and luster to the lamps. You can find out how to make them yourself and what materials are best to use for this in this article. Detailed, step-by-step master class, as well as visual photo, will be an excellent help for you in this exciting process.

Material selection

When making a chandelier, it is difficult to single out one material that would meet all the requirements. Each of them has its own individual characteristics and features. For example, paper, which is the simplest and available material, lends itself well to transformation.

Lamps made from glass shards and strips of metal have a dazzling shine and beautiful appearance. Wood and fabric add warmth and comfort to the interior. Lace lampshades are distinguished by their special beauty, captivating everyone at first sight.

In a word, you can make a chandelier with your own hands from anything, the main thing is to be smart and use your imagination in time.

A chandelier made of paper napkins is a rather bold, but justified experiment.

About how you can see it in an ordinary object creative potential to create an exclusive decorative element, we will describe in detail in this article.

Step-by-step instructions, with a description of each step, will help you make from available materials incredibly beautiful and unique lamps that will be an excellent addition to your favorite interior.

What you need to pay attention to before making a chandelier

Many people are interested in how to properly make a chandelier in and other rooms. After all, you want this element of the interior to be not only beautiful, but also functional.

On the one hand, the chandelier is lighting fixture, capable of providing proper level lighting in the apartment. After all, a lot depends on the choice of light in the room, including eye safety. On the other hand, I want the ceiling structure to complement the interior design, creating a special atmosphere of warmth and comfort.

When making a chandelier, first of all you need to take into account the height of the ceiling. For example, for low people a chandelier with a bar mount is suitable. So, the ceiling will look visually higher. If the ceilings are high - 3 m and above, then it is better to make your choice in favor pendant lamp with hook fastening.

Lamp selection

For any room you need to take an individual approach to the intensity of its lighting.

For a small bathroom you will need 80-100 W.
Kitchens require a lamp power of at least 120-150 W.
The living room and hall cannot do without light bulbs in the range of 150-300 W.

The number and power of lamps is calculated based on established standards - 20 W are required per 1 m². electricity. It is also necessary to take into account the parameters of the room, its dimensions and reflective properties.

Designer Edison lamps - look beautiful and unusual

Design of the lampshade

The appearance, decor and design of the lampshade occupies important place in the design of a chandelier. It is selected to match the interior of the room, depending on the style. Crystal for classics, metal and glass for, wood will fit perfectly into country or chalet style, fabric and silk are perfect for Provence style.

To illuminate a room on several levels, you can additionally make wall sconces or floor lamps.

Step-by-step master class on making

To make a beautiful ceiling decoration, you don't have to start from scratch. Look around, you probably have something in your house that you haven’t used for a long time. And who knows, maybe it will become the main item in the manufacture of the original lamp. Moreover, there are now more than enough ideas and inspiration for creativity on the Internet.

Important! The best place to start searching for the things you need is in the kitchen or balcony. It is there that we store all sorts of rubbish that we once needed so much and which, as often happens, is so difficult to part with later.

Spectacular chandelier made from mugs

No matter how strange it may sound, it is from dishes and other kitchen utensils, the most unusual and interesting models lamps. For example, tea mugs are ideal material to make a spectacular lamp.

For work we will need:

• Mugs
• Saucers
• Drill
• Porcelain drill with special hole

We make it quickly and easily

1. In the bottom of the mug, use a drill to make a small hole for the wire, attach the electric cartridge and bring the wire out. It is advisable to seal the hole with a plaster mixture.
2. Next, you need to glue the mug to the saucer, where there should also be a hole, insert a light bulb and hang the newly made lamp in the right place.

As you can see the original and fashion design can be obtained from completely ordinary items.

Mesmerizing yarn chandelier

Since this is a fairly simple product, to make it we will need a minimum of things, namely:

• Wire with a cross section of 4-5 mm.
• Wire cutters
• Thin thread
• Multi-colored yarn

Manufacturing instructions:

1. A ring is made from wire, the diameter of which will correspond to the future size of our chandelier. To get a perfectly even circle, it can be wound on some object that has a cylindrical shape.
2. We bite off the excess wire with wire cutters, leaving a reserve of 2-3 cm on each side. We tie the ends with a thin thread.
3. All that remains is to decorate our chandelier beautifully and brightly. To do this, we cut the yarn threads so that the length of each segment is twice the height of the lampshade.
4. One by one, we tie the resulting strings onto a knot until we hang them all over the ring. From the same yarn we make a fastening for the hook.

This lampshade can be used both as a chandelier and as a decorative element decorating the interior of a room.

By combining the skills of macrame and papier-mâché you can get stylish chandelier for the bedroom

Important! To make such a lamp, instead of wool yarn, you can use any other thread. The main thing is that it harmoniously fits into your interior.

Unusual lamp made from a teapot

How to make your own chandelier from regular teapot, you will learn from this master class. Here's what we need for this handmade masterpiece:

• Kettle
• The wire
• Electrochuck
• Metal chain

Step-by-step manufacturing guide

1. First of all, the lower part of the teapot is cut out. This is done in such a way that the resulting cutting edge is not sharp, otherwise you could get hurt on it.
2. Next, an electric cartridge is fixed to the lid of the kettle, the wire of which is led out through a small hole drilled at the top.
3. A chain is attached to the handle of the kettle, and a wire is threaded through the links. The lamp is ready.

Let's breathe new life into bottles

Glass bottles, especially if they have beautiful shapes, can be used to make a wonderful chandelier. Required material:

• Thin rope
• Flammable liquid (alcohol or gasoline)
• Glass bottles (preferably colored)
• Edison lamps (having a beautiful spiral)
• Wire and electric cartridge

Do it yourself

1. We wrap a rope around the bottom of the bottle, after wetting it in flammable liquid. Then we set it on fire and let it burst, and we begin to slowly rotate the bottle around its axis until the rope burns out completely. After this, lower the bottle into a container with cold water, wrap it in a towel and, with a little effort, break off the bottom.
2. To ensure that the cutting edge is not sharp, it must be sanded. To do this, it will be enough to swirl the bottle in sand or fine gravel for a couple of minutes.
3. All that remains is to mount the electric socket correctly, stick the wire through the neck, and screw in the light bulb. From the remaining bottles, the remaining lampshades are made in a similar way.

This chandelier will fit perfectly into any interior, especially if you hang it above the bar counter.

Decor from cans

Lamps made from cans are no less beautiful. They are made in the same way as from bottles. The only difference is that the bottom of the jar does not need to be cut off, since clear glass is usually used for lampshades.

We need:

• Beautiful thick-walled jars (preferably with a relief pattern)
• Hammer and nails
• Wire, electric socket
• Spray paint
• Edison lamp

How to do it right

1. To begin with, using a nail and a hammer, holes are punched in a circle in the lid, after which inner part gently squeezed out. The diameter of the circle must correspond to the diameter of the base in the cartridge.
2. We insert the cartridge into the cover and mount the wire.
3. Next, we paint the lid together with the cartridge in the color of our choice. Metallic paint with a golden shimmer will look best.
4. All that remains is to screw in the light bulb, close the lid and install the lamp in its proper place.

We all know what a globe is, but not everyone knows what amazing things can be made from it. For example, a cute lampshade for a chandelier that will fit perfectly into the interior of a children's room.

Here's everything we need:

• globe
• Bulb
• Electric chuck with holding element

Step-by-step master class

1. Usually the globe structure is not solid, so in order for us to get required element, it is necessary to divide it into equal two parts (hemispheres).
2. Next, at the top point of the hemisphere, you need to make a hole for the cartridge. For this, it is best to use a drill with a crown.
3. The electric cartridge is installed in place and securely fixed by the retaining element. Congratulations, your chandelier is ready!

Hanging structure made of horns

Making a unique lighting device from deer antlers is quite simple; the main thing is to have the necessary material on hand.

Such designs are famous for their special sophisticated appearance and are best suited for rooms with high ceilings. Such chandeliers are used in many interiors, but they look especially attractive in country, chalet or rustic style.

As a rule, the shades of such chandeliers have various shapes, and only natural material is used for their manufacture.

We will need:

• Antler
• Rope
• Copper wire
• Electrical socket and wire
• Bulb

Make a chandelier like this

1. Observing the safety rules, according to the diagram we connect the wire to the electric cartridge.
2. Next, the wire needs to be beautifully wrapped with decorative rope. For better fixation, you can use universal transparent glue.
3. Using copper wire, horns are attached to the lower part of the resulting rope, placing them 2 cm above the cartridge.
4. We repeat a similar procedure with the remaining lampshades, later combining them into a single composition.

Ideas for making beautiful lamps (photo, video)

We hope that the useful tips and photos presented in the article will help you not only make beautiful shades for chandeliers with your own hands, but also save your family budget.

Chandeliers and lamps play a special role in the premises of a house, apartment, or cottage. They give each room its own style and are an interior decoration, especially if they are made by hand. Although such chandeliers are expensive, as they are made by hand.

DIY wooden chandelier with energy-saving lamps

If you want to make a lamp yourself, then with a little effort and imagination, you can make something special, individual, something that will give the room a special originality. This will not only save money, but will also make the chandelier exclusive. Households and guests will admire her, and you can also make money from this.

Master classes, which are available in large quantities on the Internet, your own ingenuity, as well as the desire to create with your own hands will help you make a chandelier from scrap materials. There are no restrictions in design, as well as in the materials used.

Materials for the chandelier

Before you move on to making a chandelier with your own hands, you need to decide:

• for what room it will be made (kitchen, bedroom, living room, hall, etc.);
• with the style in which it will be made (business, romantic, classic, rustic, etc.).

These factors will help you choose the right material. It can be very different: fabrics, wood, plastic products, threads, lace, beads and much more. The first question concerns the foundation. There are many options here too. Old unfashionable chandeliers, metal and wooden hoops and frames, wire. Fantasy should not be limited. Anything will do, the main thing is to make the lamp carefully. Its appearance depends on this.

Chandelier for living room

A chandelier for a living room should be elegant and formal. The picture shows one of the manufacturing options, made of beads. A master class on making such a chandelier begins with the selection of the necessary materials and tools. In this case you will need:

• hoop;
• beads;
• strong threads or easily bendable wire;
• nippers or scissors;
• spray;
• glue gun

You can use a hoop made of plastic, metal or wood. It is better to wrap it with fabric or ribbons in the color of the future chandelier. You can combine fabrics - this will only make it more original.

DIY elegant chandelier made of beads

You can buy the cheapest beads in the store or use old ones available in the house. It's okay if they are different colors. Then you can use a spray to give them the desired color.

Beads are strung on threads or thin wire and then intertwined. The pattern may match that shown in the photo, or it may be made in a different style. A glue gun will help to secure the beads in the right places. The strung threads are attached to the hoop using thin wire. This is how a lamp design is created using beads. Other products can be additionally used in decoration, but this is up to the taste of the manufacturer.

Currently, many lovers of making chandeliers with their own hands use materials such as LEDs. Particularly popular LED strips. The results are economical and very effective lamps.

LED strips for chandeliers

The following types of tapes are used:

• SMD 3528 with number of lamps 60, 120 and 240;
• SMD 5050 with number of lamps 30, 60 and 120.

LED strips are available in lengths of 5 m, with varying degrees of protection, which allows them to be used in rooms where humidity is high (IP44).

When creating a chandelier with your own hands from several colors, you must observe the polarity when soldering and install the controller. It will allow you to adjust the brightness and switch the light using the remote control.

Chandelier for children's room

Making a chandelier for a children's room is not difficult at all. We must remember that this room should have an atmosphere of childhood, and it is connected with the flora and fauna. Therefore, most often such a chandelier is made with your own hands with butterflies, fish, flowers, various plants, and also use fabrics with children's designs.

Original do-it-yourself chandeliers with butterflies

The work begins with thinking through the design. The photo shows what you need to have to make such lamps:

• frame;
• thin strong threads;
• white cardboard;
• pencil;
• scissors;
• sharp knife;
• butterfly stencils different sizes;
• glue;
• screws for attaching the structure to the frame or ceiling.

To make a white chandelier, you need to draw silhouettes of butterflies on cardboard of the appropriate length using stencils, cut them out and then connect them to the frame, glue them securely and fasten them. Hang butterflies on thin threads inside the lamp at different lengths. If you add beads to these threads, the chandelier in the nursery will have a rather original design. When you turn on the light, moving shadows will be cast on the walls of the nursery, which kids really like.

A chandelier designed for a bedroom should have an unusual decor. The design of such a lamp should be conducive to coziness and comfort. The use of fabrics, napkins, threads, etc. is appropriate here. The photo shows a small chandelier for the bedroom, made by hand using lace napkins. The master class consists of the following steps:

• inflate the balloon to the required size;
• lubricate with Vaseline;
• then coat with PVA glue;
• apply napkins;
• allow the structure to dry;
• deflate the ball.

All that remains is to put the chandelier on the socket, insert a lamp into it, preferably an energy-saving or LED one, and run the wire from the switch.

Chandelier made from napkins for the bedroom

The photo shows a chandelier made of flowers, made by yourself. The manufacturing technology is similar to making a chandelier with butterflies. Only here it is necessary to do more complex frame. This lamp looks great in the bedroom. Subdued light and reflections on the walls will create a unique atmosphere.

Lamp made of flowers for the bedroom

Chandelier for the kitchen

It is impossible to imagine a kitchen interior without an original lamp. Here the manufacturer’s flight of fancy depends on the materials used.

DIY twine chandelier for the kitchen

This original lamp is made of twine. Suitable for a country-style kitchen. Her master class on making it consists of the following steps:

• make a frame consisting of 3 hoops located at some distance from each other. Install partitions made of thick wire between them (it is best to weld them);
• then, taking the twine, wind it lengthwise and crosswise, as seen in the photo.

Making such a chandelier with your own hands will not take much time, and the cost of materials will be minimal. But with its design and originality it will outshine purchased copies.

Another type of kitchen lamp that you can make yourself deserves close attention.

DIY thread chandelier

The production of such a chandelier is described by many craftsmen in master classes posted on the Internet. The step by step steps are as follows:

• inflate a balloon;
• lubricate with Vaseline;
• grease with PVA glue;
• wind threads (you can use multi-colored ones);
• grease with PVA glue;
• let the product dry;
• release the air from the balloon and remove it.

All that remains is to insert the socket with the light bulb, route the wiring to the right place and install the switch to make it convenient to turn the lamp on and off.

In the retail chain you can buy various chandeliers and lamps that have standard dimensions. The handmade market offers a wide variety of ready-made modules. At home, by rummaging through old things, you can find materials and designs that are suitable for making chandeliers with your own hands. They are easy to assemble original design. Master classes that are easy to find in literature and on the Internet will help with this.

How to do it. Video

Video will be shared useful tips about how to make a high-quality chandelier with your own hands.

By adding your imagination, you can create an original, one-of-a-kind chandelier that will become an exclusive element of home design. The premises of an apartment, house, or cottage will be the personification of comfort and originality, and all thanks to chandeliers and lamps made by a craftsman with soul, in an atmosphere of creative inspiration.

A chandelier in any room is no longer exclusively a lighting device. It would not be an exaggeration to say that this is the piece of furniture that is the main decoration in any room.

Of course, a DIY chandelier will be a particularly valuable thing. This will not only highlight the special taste of the home owners, but also their creative mind.

Despite the fact that if you decide to make a lampshade with your own hands for a chandelier, you will need to spend quite a lot of effort, because the process requires special concentration - surely the work time cannot be considered wasted, since the work will bring incredible pleasure and will even leave a pleasant aftertaste, and in the future you will definitely want to repeat this kind of work again.

If you are thinking about how to make a chandelier, then you have probably already seen that today you can use the most various materials and sometimes completely unusual. For example, very often the lampshade for a chandelier is made of wood or glass.

However, if you want something even more incredible, then you can also use cardboard, wooden skewers, and even wine bottles. The choice here depends solely on the ideas that the creator has, as well as on various kinds of wishes of the apartment owners.

In addition, a chandelier from scrap materials must also be created taking into account general interior rooms.

Chandelier made from plastic spoons

Disposable spoons, which most people are used to using exclusively for picnics, can actually also be one of the simplest and yet easily accessible materials for creating an interesting chandelier option for any room.

If you look at a photo of a chandelier of this type, you will be struck first of all by the variety of colors, and in the future you can easily understand that the material will last a long time.

In addition, in order to create such an interesting piece of furniture, you will need a minimum of financial and material investments.

What materials will be needed?

• Any empty plastic bottle. The only condition is that its volume cannot be less than five liters.
• Any plastic spoons. Their number depends solely on the chosen size of the future chandelier.
• Glue that allows you to glue plastic together.
• A socket from an old, no longer working chandelier.

The process of creating an original chandelier

Prepare a plastic bottle. First of all, you need to get rid of the label and bottom, and also dry it properly.

Remove the spoons from the plastic and use a knife to remove any handles that are not needed. The only thing you need to do is leave a couple of centimeters above the so-called “scoop” level.

Glue the blanks to the base of the prepared bottle. On the “tail” that remains, you need to apply as much as possible. more glue and then press it to the surface.

It is very important to continue to cover the entire bottle in this way directly in a circle until the entire prepared perimeter is “occupied” with plastic spoons.

It is best to arrange them in a classic checkerboard pattern and move them slightly together.

This way it will be possible to reduce the number of “free spots” to a minimum.

• The shade is removed from the old prepared chandelier and placed in a dried bottle.
• If desired, decorative ones can often be done in a similar way.

That's all. All that remains is to install the chandelier in the chosen location, and also check its operation by connecting it to the power supply.

One more interesting option chandelier is a chandelier with decorative butterflies. It is worth noting that when going to almost any master class on making a chandelier, designers always offer to learn how to create it, which is not surprising, because it can fit perfectly into almost any interior of the room.

Note!

Besides that this option it looks truly luxurious and expensive, even a child can make it with the help of an adult, so its popularity is easily explained.

DIY chandelier photo

Note!

Interior design will be incomplete without lighting design. The right lamp can completely transform a room. To show off your individuality and creativity, try making your own chandelier. There are no restrictions in the choice of materials. Get inspired by lamp ideas self made V different styles, three detailed master class will help you make a unique decorative item with your own hands. And tips on connection and installation will help with installation.

The first step is to decide on the material that you will use as a base:

• old chandelier;
• all kinds of rings, hoops, frames - for the frame;
• basic paper lampshade;
• natural materials;
• other.

The easiest way is to use an old unnecessary chandelier that has already served its purpose as a base. Such a restoration will help you look at this rarity in a completely new way and extend the life of the lamp. There is a clear advantage to using old frames: the main elements such as the frame, mounting and all the electrical installation are already ready. All you have to do is design without thinking about any technical issues.

Other materials will require more attention to connecting wires and sockets. Homemade chandeliers and lamps on a flat round or other shaped frame can be of any size, made in different styles and techniques. The manufacturing principle is simple: various decorative elements: beads, fringe, paper and cardboard figures and various unusual things. It turns out spectacular.

Another easy way to make your own chandelier is to use a paper lampshade that you can buy at the store. Lampshades come in different sizes and colors, you need to choose according to your idea. You can use several identical lampshades to create one lamp - your imagination will have plenty of room to run wild.

A paper lampshade costs a penny, but there are hundreds of ideas for transforming it!

Using natural materials has become a new trend in interior design. Creative ideas using branches, roots, cones and other improvised means are becoming more and more popular and find a place in different design styles.

An ordinary branch in skillful hands turns into a lamp in Scandinavian style

If suitable frame no, you can always take a coil of wire and use it to make a base for a chandelier of the desired shape. Another option is to not use the frame at all, replacing it temporarily balloon.

Video: do-it-yourself ball chandelier made of threads

What kind of chandeliers you can make yourself

You need to choose ideas for creating a lamp for the ceiling depending on what style you have chosen to decorate your home. Approach the issue responsibly, look at the photos of original chandeliers made by yourself, and choose the most suitable lamp for your interior that you will like.

Homemade lamp in boho style

The currently popular boho style is perfect for handmade lovers. This is a free style that is distinguished by a variety of materials, colors, textures and shapes. In such an interior, everything is possible, and the chandelier should be its highlight.

Artificial flowers will decorate any craft

A little fringe and hot glue - fresh and original

Fringe is a favorite element of boho fans. When creating a chandelier with your own hands, this material will come in handy. Moreover, there are all kinds of braid with fringe on sale, which simplifies the process even more.

To make a boho ceiling lamp, take several rings of different sizes, connect them in decreasing order and decorate each one with braid. The original chandelier is ready, all that remains is to secure the socket with wire.

As an option, instead of ready-made factory fringe, you can use colorful or plain ribbons, ribbons and threads. You will have to tinker a little longer, but as a result you will get homemade chandeliers that are unique in their kind.

Even old T-shirts and dresses cut into strips can be used as braid

Retro and vintage

Homemade chandeliers and lamps fit quite organically into a vintage-style interior. Most suitable option in this case, a repurposed chandelier from “those times.” You can find it at your grandma's house or at a flea market for pennies. The main thing is that the device works. But even if it doesn’t work, it doesn’t matter, you can always fix it.

For a vintage lamp, these are suitable: decorative ornaments:

• crystals;
• beads;
• lace;
• feathers.

Remove the old shades and decorate the frame with prepared plastic crystals.

Important! To make the picture complete, use light bulbs in old style- depicting candles. A retro chandelier will lose its charm if spiral holders are screwed into the sockets.

A fringe with feathers, glued to a round paper lampshade around the perimeter, will turn the lamp into something weightless and airy. This DIY chandelier for a home decorated in vintage style will become the center of the composition. Start gluing from the bottom tier, gradually working your way up. Your task is to hide the attachment points with the next layer of feathers.

This lampshade will suit both retro interiors and modern design Houses

Another essential attribute is lace. But how to make a lace chandelier with your own hands? A balloon, PVA glue and grandma's lace napkins come to the rescue. If you know how to crochet, you can make several openwork napkins specifically for these purposes.

Take several knitted elements and soak them generously with PVA glue. Don't worry, after drying the glue will become transparent and will not be noticeable. Take a balloon of the desired shape and size. Lubricate the surface of the ball with rich cream or oil and carefully glue the napkins.

Your lampshade may be in the shape of a ball, then you need to start gluing from the bottom. The central element of the first napkin should be strictly in the center of the lamp. If you need a slightly open shade, you should start from the side surfaces.

After the glue has completely dried, you need to release the air from the ball. Remove the ball and the shade is ready.

The idea is ridiculously simple, but how effective!

Experiments with lamps in the nursery

Often, when making renovations in a nursery, parents cannot choose a chandelier that the child would like and look good in the interior. If you find yourself in this situation, learn how to make a chandelier with your own hands and create the lamp your child dreams of.

Many girls dream of a room that looks like a fairy or princess's bedroom. A magical chandelier made of rose petals floating in the air will good addition to a fairytale nursery. Use an old floor lamp lamp as a base or make a frame from steel wire.

Ready-made artificial rose petals, which can be found on sale, are suitable as decoration. Another option is to make your own petals. For this you will need a thin cloth desired color, which will not crumble around the edges. The tools you need are scissors and a needle and thread.

Cut round petals according to the prepared template. Connect them with a thread to make garlands. Attach the resulting threads around the entire perimeter to the frame. In the center of the frame, make a wire base for the cartridge and a suspension for mounting on the ceiling.

This chandelier is as light as a ballerina and as delicate as a feather.

If you have a glue gun, making your own lamps will not be a problem. Cool idea for the nursery - a colorful chandelier made of plastic cups. Glasses must be made of durable and transparent plastic. These are often found in the party departments near balloons and caps.

The work of connecting the elements is quite meticulous. They start from the middle. Select diameter and connect required quantity cups around the circumference. Pick up rows one by one until you reach the top of the lampshade. Then turn the workpiece over and repeat on the other side. The bottom of each glass should be facing the center of the sphere. There will be enough in the middle large space, where you can easily place a light bulb.

DIY children's lampshade - it's very simple

Simple lamp ideas for a couple of dollars

A very simple, but at the same time cute idea - a night light made of plywood. The choice of shape is limited only by your imagination. A plywood figure is mounted at a short distance from the ceiling or wall, and a light bulb is located behind it. The result is a muted, diffused glow around a dark silhouette.

A popular option is the cloud. Cut out a cloud from plywood or chipboard to beautiful composition you can make a few more reduced clouds. Paint the clouds white with acrylic non-toxic paint. Attach to cloud with reverse side metal elements in the shape of the letter "P". Remove the wires and connect the cartridge. Then screw your cloud to the wall, hiding the wiring and light bulb behind it.

You can make such a night light chandelier with your own hands in just a couple of hours.

IMPORTANT! Please note that any homemade chandeliers can only be used with those types of light bulbs that do not heat up during operation. Diode lamps are best suited. They do not heat up, shine brightly and consume little electricity. In addition, the variety of shapes allows you to choose a light bulb for even the most original lamp.

Simple and traditional way– cylinder lampshade. These are often found on old floor lamps. The upper and lower edges of the lampshade are formed from two identical circles. Fabric or paper is stretched between them. Depending on the color and print, the same chandelier model can be presented in completely different styles - from ethnic motifs to minimalism.

Such a lampshade can even be made from a piece of wallpaper.

Simple, but spectacular idea– spider chandelier (photo below). Its highlight is the long wires, which are not hidden anywhere, but, on the contrary, serve as decoration for the ceiling. They resemble the long legs of a spider, which is why this model is called that. A socket is connected to each wire, and a light bulb is screwed into it. The wires spread across the ceiling in all directions, are attached to support points and hang down. Bold and extraordinary, very easy to implement.

The lamp really reminds big spider with thin legs

The most original ideas for the brave

In principle, to make chandeliers for your home with your own hands, you can use, without exaggeration, any object as a basis. Turn on your imagination and you will understand that any thing can be creatively played out.

Old wooden clothespins? What an idea for a homemade lamp! The principle is the same: frame, decor, socket mounting, fixation on the ceiling. The result will exceed your expectations. This chandelier will decorate a loft-style interior. It looks very original.

Wooden clothespins - stylish and environmentally friendly

A skein of thread and a flower basket? Wonderful! Don't be afraid to experiment. Cut the threads and tie them to the top edge of the basket. Tie a knot at the bottom, straighten the drapery a little, decorate with beads to your taste and attach to the ceiling, where the wiring is already out and the light bulbs are connected.

Everything ingenious is simple, and this idea is proof of that

Pompons, origami figures, Christmas tree decorations, beads, dishes, tea sets, cutlery, CDs, all kinds of scraps, trimmings - if you wish, you can transform this trash into a mind-blowing lamp.

Step-by-step master classes on making chandeliers

For those who want to try making chandeliers with their own hands, we offer original ideas and step by step guide. The most popular and good ideas lamps are considered in more detail. If you follow the recommendations and put in a little effort, it will turn out the same as in the photo, and maybe even better.

Chandelier made from plastic bottles

Some people believe that used plastic bottles should be sent to a landfill, or, as a last resort, to a recycling plant. But some needlewomen don’t think so. Ordinary green, brown and clear drink bottles are turned into incredibly beautiful lampshades.

You can make a fantastic lamp yourself

Such a chandelier from plastic bottles in the form of leaves it can settle in your home. To do this, collect necessary materials and tools:

• bottles of several colors;
• scissors;
• thin wire;
• awl;
• soldering iron;
• wires;
• cartridge;
• switch.

Tools and materials

Instructions for making and assembling a chandelier:

1. Draw a leaf-shaped stencil. It is better to do this on thick cardboard.
2. Cut out the resulting sheet.
3. Place a stencil on the plastic and trace it with a pen. Find the optimal arrangement of templates so that there are as few scraps as possible.
4. Cut identical plastic leaves of all colors. The edges of the leaves may seem too sharp and sloppy to you - don’t worry, we’ll fix it soon.

Chopped leaves

1. When the supply of leaves is ready, we begin processing. This is where a soldering iron comes in handy. Heat it up and move it along the edge of each element. The plastic will begin to melt and the leaves will begin to curl.

It turns out pretty neat

1. Process all the details in this way.

You need to prepare a lot of leaves

1. Using an awl, make holes in each sheet at the base.
2. Collect twigs from wire and leaves. Use different shades to make the branch more voluminous and brighter. Fasten the wire in the holes of the plastic, try to make the branches thick to hide the wire behind the leaves.

Wire twigs

1. Let's start assembling. From small branches, collect larger ones, connecting them together with the same wire as if you were weaving a wreath. Form the lampshade into the shape you need. The wire is flexible; if something goes wrong, it can always be corrected and straightened.
2. At the base of the chandelier, make a wire mount for the socket.

1. Place the shade on the chandelier.

Luxurious glass chandelier

From glass bottles from wine you can create unique chandelier for a living room or bar. The idea is large-scale - powerful wooden base and a dozen bottles for light bulbs. This entire bulky structure will be suspended from the ceiling.

Could a true wine connoisseur have another lamp?

What you will need to make your own bottle chandelier:

• wine bottles - can be of different colors and brands, but of a similar shape and size;
• boards;
• hanging chains;
• self-tapping screws with loops - for fastening;
• glass cutter;
• jigsaw;
• sander;
• drill;
• stain;
• cartridges and wires.

The master class is quite complex, but detailed instructions will help you cope with the task:

1. Prepare the bottles: remove labels, wash them, dry them. Make a mark at the same height on each bottle. Use a glass cutter to cut off the bottom of each.

Sometimes labels have to be soaked in water to make them easier to remove.

1. Take care of the boards. Cut them into pieces using a jigsaw the right size– be guided by the area of ​​the room and the number of bottles (in the example there are 10 of them).

Sawing boards

1. Sand the edges with a sander. The ends should be as smooth as the other surfaces.
2. Stain the wood with stain. The color depends on your interior. The author preferred a dark shade.

Get a deep, noble color

1. Mark the installation locations for the lampshade bottles. They will be installed symmetrically in two rows of 5 each.
2. Using a drill with a 25 mm diameter wood bit, drill holes in each mark.

Drilling a hole

1. At the top corners and perimeter of the base, screw screws with loops for fastening to the ceiling. Measure the chain pieces of the required length and connect them to the base.
2. Place necks in the bottle holes.

Bottle hole

1. Prepare 10 cartridges and connect them with cables. Thread each individual wire through the bottle until there are 10 wires left on top of the light.
2. The cables are connected into a circuit and insulated. Hanging the chandelier by chains. Electricity is connected.

Ready-made lamp from wine bottles

Pearl threads - a great idea and implementation

Glamorous chandeliers in the shabby chic style or sparkling Swarovski - lamps made of stones and beads attract attention and make any interior festive. Making a chandelier with your own hands from beads and rhinestones seems something unattainable, but in fact the technology for creating it is very simple.

For such a bright and massive model, prepare:

• ready-made garland beads (sold in any decor department) or a large number of beads, fishing line and patience if you decide to collect the threads yourself;
• garden hanging for flowers or other similar basket;
• acrylic paint in a can;
• knitting wire or special wire for making jewelry;
• glue gun and rods for it;
• wire cutters

Necessary materials

How to make a lamp from beads with your own hands:

1. Prepare the beads. It’s better to take ready-made beads (for example, to decorate a Christmas tree), otherwise you’ll have to tinker with stringing them. If you are not happy with the color, paint them with spray paint.
2. While the beads are drying, work on the basket. If it is rusty, go over the metal with a brush. If it is in good condition or new, just paint it.
3. The beads are dry. Now you need to assemble one long one from several garlands. Use hot glue to connect the outer beads.
4. Cut the wire with wire cutters into pieces of 5-7 cm. You will need several hundred of them for such a chandelier.

The work is monotonous, but it goes quickly

1. Take a garland and one piece of wire. Secure the beads to the basket at the bottom. Continue wrapping the beads around the basket, securing the result with wire so that the decor does not move to one side.

DIY decoration of the lower part of the lampshade

1. When the lower part of the basket is completely ready, start decorating the upper half. Long threads are passed through the top of the lamp and pulled through the top edge of the basket. Do not pull the garlands; they should hang freely. Lock them at each turn.

Almost done - all that remains is to remove the remaining wire

1. If you did everything correctly, the beads will completely hide the basket and hanging chains. You can decorate the resulting masterpiece with ribbons, rhinestones or other elements.

It looks beautiful with or without a ribbon – it’s a matter of taste

Subtleties of installation and assembly

Everything is clear with the design of the lampshade - there is a place for imagination and invention. But what about the electrical part? After all, without a correct and safe connection, not even the most luxurious chandelier will work.

We really hope that if you decide to make an electric lamp yourself, then you are familiar with the intricacies of installation and safety rules. But just in case, let’s list all the important little things again:

1. Never spend electric installation work(even a banal replacement of a burnt out light bulb) with the power on.
2. Do not hang the chandelier by the cable. The structure must be supported by a suspension: a chain, a rope, a cable - anything, but not a working cable.
3. The light bulb should also not hang on the wire - because of this, breakdowns most often occur. Provide a support mount for the socket at the base of the lamp, this way you will remove the load from the cable.
4. Use the indicator to identify the wiring phase. There is no need to do this “experimentally”, connecting the device at random.

The yellow wire usually represents ground

1. Use three-core, double-insulated wire. The cross section is selected depending on the total power of the device. For a lamp up to 60 W, an area of ​​0.35 mm 2 is enough, up to 120 W - 0.5 mm 2, up to 300 - 0.75 mm 2.
2. Seek good contact at the junction points. Poor contact can cause the wiring to heat up, which is very dangerous.

Use a screwdriver to secure the cable in the socket.

1. Incandescent lamps are not compatible with paper lampshades- This is a fire hazardous combination.

As you can see, subject to simple safety rules and creative approach Anyone can make a homemade lamp. Photo ideas inspire you to find creative solutions and extraordinary approach. Your lamp will reflect your personality and decorate the room.