DIY soft kitchen corner. DIY kitchen corner - a place where the family gathers

Not everyone can boast spacious kitchen, on which there is room for large-sized furniture. IN small rooms every square meter is of great importance. This is especially true for the table area, where you want to organize as many seats as possible. For such a task, perhaps optimal solution is the use of a soft corner sofa, which will make it possible to make the most of the free space. Let's look at a few below simple options how to make a kitchen corner with your own hands. Drawings and diagrams combined with step-by-step photo instructions, will allow even an inexperienced master to understand the process and complete the work without the involvement of professionals.

If you want to minimize carpentry work, then you can use ready-made Ikea shelves of appropriate dimensions as a frame. To make such a kitchen corner you will need following materials:

• Ikea shelves with fronts;
• Chipboard or plywood;
• furniture foam rubber;
• upholstery fabric;
• drill;
• electric jigsaw;
• construction stapler;
• bolts with nuts.

Coziness and comfort in a small kitchen

Installation and connection of the frame

When choosing the size of the shelves, it is necessary to take into account certain standards: the height and depth of the seat of the soft corner in the kitchen should be on average 40-45 cm. The use of shelves is convenient because you can easily create not only an L-shaped structure, but also a U-shaped one, if For this purpose, the area and layout of the room are available.

The structural elements are connected to each other using bolts. To do this, you first need to drill holes of the appropriate diameter in the side walls. It is best to drill two shelves at once, fastening them together with clamps. However, this is not always possible due to the rather small internal space. If the drill does not fit inside the shelf, then a hole for mounting is drilled from the outside - separately in each wall. In this case, it is very important to take correct measurements in order to maintain alignment when connecting structural parts.

Advice! If the bolts are tightened too much, the wood may become deformed. To avoid this, it is necessary to use additional spacers under the bolt head and nut.

Making a kitchen corner frame with your own hands

Installation of fronts and seat bases

After installing the frame, you need to secure the fronts of the shelves. Of course, you can do without them, which will significantly reduce the cost of the design. However, if you want to have extra bed for storage kitchen utensils, then doors are necessary.

The base for the seats is made of chipboard (OSB) sheets or plywood with a thickness of 10 mm or more. The use of wood chipboard or oriented strand board is the most cheap option. Although when choosing a material, it should be taken into account that plywood can be subjected to higher loads and has better moisture resistance.

The board is cut using a jigsaw according to the dimensions of the corner. After this, all ends must be sanded with medium-grit sandpaper.

Fastening doors-facades and installation wooden base for seat

Upholstery with soft material

Making soft seats for the kitchen corner is perhaps the most difficult stage of the work. Furniture foam rubber 80 mm thick is cut in the same way as a sheet of chipboard (plywood), and then glued to the base.

Note! For reliable bonding of foam rubber with wooden surface you need to use special glue. On furniture factories glue “88” or “Porolon-2” is often used, which are universal compositions for joining dissimilar materials.

The soft base must be covered with fabric, for which a construction stapler is used - the distance between the staples is 1-2 cm. The complexity of this work depends on the chosen fabric. Even an inexperienced person can do upholstery with a plain material, but correctly stretching fabric with a complex pattern is a task on a completely different level, requiring professional skills.

Ready product can be decorated with pillows, which will additionally serve as a soft backrest.

Kitchen corner made from Ikea shelves

Simple kitchen sofa made from furniture board

One more affordable option is to make a kitchen corner with your own hands from furniture board. To complete this undertaking, you should purchase the following materials:

• furniture board (18 mm);
• acrylic paint;
• foam rubber (80 mm and 20 mm);
• textile;
• drill;
• jigsaw;
• wood screws.

Cutting the shield and connecting parts

Before you start cutting the panel, draw up a drawing of the kitchen corner with dimensions that will meet your criteria. The scheme must be developed in such a way that at least 3 people can comfortably sit on the sofa.

The easiest way to cut a shield is with a jigsaw, although you can also use hand saw. The main thing is that all ends are located at an angle of 90° with respect to the main plane, for which the tool should be held strictly perpendicular while cutting.

The structural parts are connected to each other with self-tapping screws. To prevent cracks from forming during the tightening process, a hole should first be drilled for the screw.

Note! The diameter of the drill should be 0.5-1 mm less than the diameter of the screw.

Hull painting

To paint the kitchen corner, you can use either alkyd enamel or acrylic enamel. The second option is more preferable in terms of stability and durability of the layer. In addition, acrylic paint does not have a strong odor, so it can be applied directly indoors.

Before applying the first layer of enamel, the body must be treated with a primer to increase adhesion paint coating with a wooden surface. Usually 2 layers of paint are enough to get an even color. Although darker tones may require 3 coats.

Making soft pillows

For the soft part, as in the previous version of making a kitchen corner with your own hands, the best option is furniture foam rubber. Unlike materials such as padding polyester or holofiber, which also provide volume, foam rubber also has good density, so sitting on it is more comfortable.

Note! For the back it is enough to use foam rubber 20 mm thick, while for the seat you will need more thick layer– 80 mm.

If you know how to work sewing machine, for foam pillows you can sew removable covers with an elastic band or zipper. This approach is convenient in that the old fabric can always be replaced with a new one without any effort. great effort.

A simple version of a soft corner for small kitchen

Cute wood plank corner

A simple but quite nice kitchen corner can be made from a wooden board. For this you will need:

• wooden board 100x40 mm;
• plywood or chipboard;
• round dowel with a diameter of 15 mm;
• drill with a 15 mm crown;
• jigsaw;
• construction stapler;
• batting;
• upholstery fabric;
• PVA glue;
• stain, varnish

Scheme of a corner for the kitchen from wooden planks

Sawing and grinding parts

According to a pre-prepared drawing, which can be drawn up using computer program or draw by hand on plain paper, the board is cut into separate pieces. To give the kitchen corner more elegant look, we cut out the figured elements with our own hands.

Advice! To obtain smooth shapes, curves can be drawn using a long flexible ruler.

All parts are subjected to rough and fine grinding using sandpaper with different grain sizes. Where necessary, holes are drilled for dowels, which are attached to PVA glue. Actually, the entire corner will be assembled using dowels and glue.

Connections based on dowels and glue are considered one of the most reliable in furniture production

Staining and varnishing

Instead of enamel, we will use stain as a coating, which saturates the wood without creating a film on the surface characteristic of paint. In this way, the structure of the tree is completely preserved, while its color can be very different - from light “pine” tones to a dark red hue.

Note! Stain has the ability to raise wood lint during the painting process. Therefore, after it dries, additional sanding of the surface will be required.

Varnish, like stain, is applied in two layers. To speed up the process, it is recommended to use a water-soluble varnish, the drying time of which under normal temperature conditions is 30 min.

The base of the kitchen corner after staining and varnishing

Before lubricating the ends with glue, we assemble the kitchen corner “dry” with our own hands. It is important to adjust all the holes and the length of the dowels so that the frame is assembled without gaps.

If all the ends and corners fit perfectly, then we assemble the frame using glue. To strengthen the structure, you can use ordinary 4x4 metal corners, which are attached to internal corners.

The bottom of the boxes is made of plywood or chipboards, which is simply placed on any furniture corners fixed to the bottom of the frame.

The base for the seat is cut according to the dimensions indicated in the drawing from the same sheet of plywood or chipboard as the bottom of the drawers. Covering soft material is performed in the following sequence:

1. We cut out a shape from foam rubber, which should be 2-3 cm larger than the base in length and width.

1. We cover the seat with batting, roughly cutting it along the contour and fixing it with the same glue.

Covering the seat with batting

1. We attach the upholstery fabric to the base using staples.

In the end it turned out pretty good corner sofa which can decorate any kitchen.

Wooden corner to the kitchen with your own hands

An original idea - a corner sofa made of pallets (pallets)

Construction of wooden pallets used for transportation various cargoes, is quite simple. At the same time, the reliability of such elements allows them to be used not only for their intended purpose, but also for production original furniture.

For your information! To make a pallet that can withstand heavy loads, manufacturers use premium lumber. Therefore, even used pallets are very reliable.

Of course, a corner sofa made from pallets, given their dimensions, will not fit in every kitchen. However, it can be used in a gazebo, especially since assembling the corner is not particularly difficult.

Drawing wooden pallet with standard sizes

Selection and fitting of pallets

At the first stage of manufacturing a corner sofa, you should carefully inspect each pallet and select only those designs that are free from defects. Special attention it is necessary to pay attention to cracks and large chips, which can cause unpleasant consequences while using the sofa.

Based on the dimensions of the pallet, a corner sofa is designed. If the area allows, you can assemble a structure from solid elements. Otherwise, you will have to use a circular or hand saw to adjust to the required size.

Checking the integrity and preparing pallets according to the required dimensions

Connecting parts

Making your own kitchen corner or gazebo from pallets is very simple. To do this, you need to assemble a kind of construction set from prepared parts and fasten them together with screws.

To arrange the seat, you need to install pallets in two rows. This height will be sufficient, given that a layer of foam rubber (about 100 mm) or, for example, a thick mattress is supposed to be placed on top.

To make the back, you need to place the tray vertically and screw it to the bottom of the base. Actually, this completes the assembly of the frame.

Manufacturing of soft elements

As noted above, the soft part of the corner (seat and back) can be made of foam rubber, covering it beautiful fabric. Considering quite large area In this case, the products will have to be spent well, since furniture foam rubber is not cheap.

For your information! The price of one sheet of foam rubber measuring 2000x1000x100 mm starts from 1200 rubles.

If you use old mattresses and pillows as soft elements, you can save a lot. Of course, you will still have to buy upholstery fabric, but the costs will still be significantly lower.

An original soft corner made from pallets for a summer house or private home

The article offers the simplest and most accessible master classes on making a kitchen corner with your own hands. Perhaps there is not much design thought in these products and there are no modern technological solutions, however, such work is quite realistic to be performed by a person who does not have solid experience in carpentry. For more serious tasks, there are specialists.

Video: how to make a kitchen corner with your own hands

Beautiful kitchen corner “Etude” with a sleeping place

Kitchen Area– attractive element kitchen interior, allowing you to save space and gather everything in a small kitchen big family. Humanity has been using kitchen corners since the postmodern era. Despite a large assortment kitchen furniture In modern stores, it is not always possible to find a suitable one. But this is not a problem for a person who has basic carpentry skills. A do-it-yourself kitchen corner is an opportunity to have furniture that perfectly matches the style and functionality, without large financial investments.

Soft kitchen corner made of leatherette with drawers for storage

Soft kitchen corner of unusual shape

Kitchen corners are popular due to several of their properties:

1. Compactness. They allow you to save space, which is the main advantage for a small kitchen that combines a kitchen and a dining room.
2. Functionality. A corner sofa for the kitchen can contain drawers for storing things, food supplies or dishes, and vegetables.
3. Comfort. A large family or company can sit at the table.
4. Large selection of options. There are many different designs. You can select and assemble with your own hands a corner that is suitable in size, style, and finishing material.
5. Cheapness. A kitchen corner made by yourself will always cost less than one bought in a store.

DIY wooden corner for the kitchen

Deciding on design and construction

Yellow kitchen corner with irregular table

The kitchen corner includes a short and a long sofa and a connecting corner between them. Those who don’t know how to make a kitchen corner with their own hands should take into account a few tips:

1. You need to start by determining the location for the corner, its size, think over the design, and color scheme.

   

   Drawing describing parts and their connections

2. For inspiration, you should look at photos in magazines or on websites specializing in design and furniture.

   

   Soft and comfortable brown corner of custom sizes

3. The design can be as simple as possible: a frame, seats and backs on it. Storage boxes will increase the functionality of the new furniture. They can be made retractable or with an opening lid. Corner kitchen sofas with a sleeping place can be used for temporary rest; they allow guests to stay overnight. Their production requires additional investments, more professional skills, the purchase of special fittings and a mechanism that allows you to fold and unfold the sofa.

   

   Beautiful kitchen corner made of wood

4. Corners can be right-handed or left-handed. This is important to consider.

   

   DIY right-sided soft corner for the kitchen

   

   Left-sided kitchen corner in the kitchen interior

5. For upholstery, it is better to use leatherette or synthetic materials. They are easy to clean, stronger and more durable than fabric.

   

   Material for covering a kitchen corner

6. If the product is intended to be soft, like a filler, it is most practical to use polyurethane plates or foam rubber.

   

   Foam rubber for a soft kitchen corner

7. The manufacture of the corner should be carried out according to the drawings. You can sketch them yourself or find drawings and diagrams for a wooden kitchen corner with your own hands in specialized publications or on the Internet. The found schemes will still have to be modified to suit your conditions: change the sizes. The drawn up drawing simplifies the work, allows you to more accurately calculate materials, and saves time.

   

   Drawing of a corner with dimensions - side view

8. After this, they make a list of all the corner elements and materials that should be purchased.

   

   Details for the frame of the future corner

9. All missing tools, fixtures, fittings, and materials should be purchased in advance before work begins.

Necessary materials

Materials for making kitchen furniture

To make a corner sofa for the kitchen you will need:

• laminated, sanded chipboard, plywood;
• fasteners: dowels, screws;
• loops;
• glue;
• nichrome thread;
• edge for decorating ends, thrust bearings;
• furniture corners;
• polyurethane plates if a soft corner is planned;
• upholstery;
• wood primer, paint, varnish;

Required Tools

Tools for assembling a kitchen corner with your own hands

In the process of making furniture you will need:

• electric jigsaw;
• furniture stapler;
• drill, screwdriver;
• hammer;
• roulette;

Manufacturing process: step-by-step instructions

Soft kitchen corner with a shelf in the corner

For a long sofa, the following parts are cut out:

• the bottom, it can be made of plywood;
• bars for the frame;
• two side panels made of chipboard;
• two side parts for the long sides of the box (can be made of plywood);
• back;
• sitting

Assembling most of the kitchen seating area

The sofa is assembled in the following order.

1. Cover the ends of the sidewalls with an edge, and the bottom with thrust bearings.
2. Using a screwdriver and self-tapping screws, make a frame, then a box.
3. The back is assembled and secured to the sides using dowels. The fastening can be reinforced with metal corners.

To make a short sofa, all steps must be repeated. The only differences are in the size of the parts.

Assembling the smaller part of the kitchen seating area

A long and short sofa are combined into a single structure using a corner connecting element. Using dowels and metal corners, the seat is connected to the back, then attached to the sides.

Ready painted frame of the future corner

At the final stage, upholstery is performed, if it is planned:

1. The filler parts are cut out from polyurethane plates. Filler size is slightly larger size element for which it is intended. Soft filling is prepared for sofa seats and backrests. Attach with glue or double-sided tape.
2. Upholstery parts are made in the same way, but their size should allow the material to be wrapped and secured with a stapler.

Corner with upholstery and pillows in the kitchen interior

If soft upholstery is not provided, then the wood is treated with primer and varnish. You can use paint or tint to change the color.

Beautiful kitchen corner made of natural wood with your own hands

Decorating a finished corner - an element of kitchen design

Decor for the kitchen corner in the form of pillows with removable covers

Decoration is carried out in accordance with the interior of the kitchen and the preferences of the owners. Therefore, there can be many options. Here are some:

1. Natural wood looks great in the interior of any room. This option is worth stopping at if the rest of the furniture is made of the same material. It is safe, environmentally friendly, always looks decent, and brings warmth and comfort. Natural wood covered with tinting and varnishes.
2. If you are planning a sofa without upholstery, you can paint it to match the color of the kitchen furniture or, on the contrary, support an element of interior decor with color. A combination of two harmonious colors will look impressive.
3. To decorate the kitchen corner sofa, use upholstery made of leatherette and dense fabrics. Such a corner can be with padding, soft, or without it, then the seats will be hard. Choose suitable color allows a large assortment similar materials in the trading network.
4. It is important to decorate kitchen sofas with plastic and similar modern materials. They are easy to clean, do not lose their original appearance for a long time, and are on sale big choice colors and shades. But this one the material is suitable not for every interior style.

A simple do-it-yourself corner with soft, removable seats

Kitchen corner sofas will not go out of fashion for a long time, because they are comfortable, functional, save space, and create coziness. The kitchen is the most multifunctional room. For most, the kitchen is the place that unites all family members at one table. The desire to make this time more pleasant and the place more attractive is understandable. New item The interior design makes the atmosphere warm and cozy when combined with the right lighting. An additional lamp with adjustable height or sconces will be an effective decorative element.

Brown sofa corner for the kitchen with storage drawers

Video: DIY soft kitchen corner

A selection of photos with kitchen corners made independently

If you have a long-standing question about replacing kitchen furniture for dining area, then you can easily solve it without spending a lot of money on a store-bought set. Any home craftsman can make it with his own hands kitchen sofa chick. This way you can not only save money, but also contribute to the design of your personal space.

You won’t have any difficulties finding drawings of a corner sofa for the kitchen. You can find a suitable drawing with suitable dimensions on the Internet.

Make a kitchen DIY corner possible from available materials and using the tools available on every farm. If, in addition to everything else, you follow the recommendations for making a kitchen corner with your own hands, then after completing the work you will not have to deal with the mistakes you made.

How to design a kitchen corner?

The process of assembling a kitchen corner with your own hands can be represented as a series of successive stages:

Drawing up a drawing

Directly before assembly for a soft corner with your own hands, you should already have a correctly drawn up drawing. The first question you must decide is to choose a place in the kitchen for your corner sofa. Taking into account its size, you will have to select the dimensions and configuration of the corner for the kitchen:

• Length and depth of sections;
• Option for placing the short part of the sofa relatively long;
• Height including the top edge of the backrest;
• The method of fastening the sections is monolithic or modular.
• Upholstery and frame material.

When choosing drawings of a corner sofa For a DIY kitchen, we recommend considering only those models that have a separate corner module in their design. Side sofas, which have one corner seat attached to furniture corners, will not last long due to the low reliability of such a connection. An attempt to save on material by not using two racks in the design will not live up to expectations; as a result, the corner will turn out to be extremely fragile. Therefore, for the kitchen it is best to choose modular designs that, if necessary, can be quickly moved to free space.

Another advantage of sofas of this design is the ability to change the configuration from right-hand to left-hand. As installation locations For modular kitchen corners, you can choose a corner of the room or an option where the furniture is placed in one line. When calculating the length and width of the corner, you must take into account the area of ​​the kitchen space, as well as the location of other interior items and household appliances. Once the kitchen sofa appears on your plan, you need to pay attention to the passage, the width of which should not be less than 60 cm at its narrowest point.

In order to accurately and without errors calculate the dimensions of a corner sofa and define for it appropriate place, you can choose a suitable drawing of a kitchen sofa on the Internet. Naturally, the dimensions given in it will not correspond to your room, so they will have to be recalculated taking into account the size of your future corner.

But remember that all kitchen corner corners There are dimensions that remain unchanged regardless of its design:

• Height along the upper edge of the back – 85-95 cm;
• The length of the short and long sofas is 120 and 200 cm;
• Seat depth – 50 cm;
• Seat height - 45 cm.

Materials for the kitchen corner

The material for making a kitchen corner should be laminated or sanded chipboard 16 mm thick. Do not forget about finishing the end part of the workpieces on which you need to install ABS edge. If we consider in more detail the design of the sofa frame, it should include the following elements:

1. Two slats are supports for the backrest.
2. Top bar of the drawer.
3. Two side stands.
4. Back wall of the box.
5. Bottom drawer front panel.
6. Drawer bottom, seat and back.

To make the bottom and back wall of the box, as well as the seat, experts advise using rough chipboard.

You can often find PVC profiles in stores, but you should not use it for making corner parts. This is a very unreliable option for the edge, which will come off quite quickly during active use of the sofa.

If you want your homemade kitchen sofa to look the same as factory products, then it is advisable use chipboard cutting services. To do this, you need to contact any furniture workshop, where you will definitely find machines for cutting sheet chipboard. They are engaged in sawing both for their own needs and for individual orders. But before you go to the workshop, you need to draw up at home detail drawing corner sofa in the kitchen and indicate the dimensions of each element.

After this, you transfer the drawing to the technologist, and he already puts all the dimensions into the program, which draws up a cutting map and determines the number of required chipboard sheets. At the same time, a calculation is made total number linear meters cut corresponding to the crosscut tape. But not all the work can be done by a furniture workshop. You will have to make the figured parts at home. But they must still be present in the submitted list and be indicated in the form of rectangular blanks.

You can additionally pay specialists workshop for cutting out shaped parts from chipboard and gluing trim tape to all the blanks. This option is often chosen by home craftsmen who want to minimize the amount of homework. Please note that attaching ABS tape using a machine is done better than manually. As a result, the master saves himself from the need to mill parts and create templates for them at home.

Some owners want save as much as possible to make a kitchen corner from chipboard and therefore plan to mill the shaped parts themselves. In this case, they need to adhere to the following recommendations while performing this work:

When choosing ABS tape for edge processing Please note that it may already include glue or be without it. Clean tape is intended for milling on machines. In this case, the glue is supplied from a separate container. If, due to carelessness, you purchase this particular type of tape, then you will not be able to make a corner using it at home.

Having finished figure milling operation elements and having secured the tape at the ends, you can begin to apply markings and assemble the sofas. When you mark the holes on the surface of the side posts, keep in mind that the front panel of the drawer should extend 2 mm into the depth of the material. As a result, the center of the hole will be located 10 mm from the edge. Thrust bearings must be secured to the lower ends.

As a fastener for kitchen corner made of chipboard use confirmations and dowels. For connections that ensure structural rigidity, it is best to use metal screws. In other cases, it is recommended to use dowels. This solution can minimize the number through holes. Dowels are the only fastening element used to connect the lower back support strip to the main structure.

Upholstery and assembly

Quality corner handmade, should not only be reliable, but also look beautiful. That’s why you can’t do without stylish upholstery. When choosing a material for covering a corner, you should pay attention not only to its practicality, but also to its compliance appearance room design.

At the beginning foam rubber must be glued to the parts with a density of kg/m3. The soft elements of a kitchen corner are considered to be the back and seat. In the process of preparing the backrest for upholstery, it is necessary to cut a rectangular piece of foam rubber 4 cm wider than the width of the backrest. A supply of material will be needed to bend the foam rubber at the end of the part.

The foam blank for the seat is made 2 cm wider than the structural element itself, since it will only have to be wrapped at the ends at the front. The foam rubber is attached to the wood using glue for quick installation.

Then he proceeds to cutting the fabric: onto a prepared piece of upholstery material lay the main element and trace it along the contour. Then, 5 cm is added on each side of the drawn line and a pattern is made along the new border. The result should be a fabric with dimensions 10 cm greater than the width and length of the fitted part.

For attaching folded fabric use a stapler, securing the upholstery material with it only on one side of the part. Then the fabric needs to be stretched evenly, and only after that it is attached to the part with reverse side. In the same way, the remaining sides must be fastened with a stapler with tension.

Conclusion

To the hostess as well other family members felt as comfortable as possible in the kitchen, it is necessary not only to purchase functional household appliances, but also to solve the issue with the kitchen corner. But this does not mean that you need to go to the store to buy furniture for the dining area. You can do it yourself, especially since this task is not as difficult as it might seem at first glance.

To get started you will need draw up a detailed project, reflecting in it the exact dimensions of the future kitchen corner. To make the corner look as stylish as a factory product, it is best not to make the blanks yourself, but to use the services of a furniture workshop.

Udachnoye design solution in the form of a kitchen corner will never go out of style. This is a comfortable, functional furniture product that does not take up much space, but at the same time allows three to four people to sit comfortably. dining table. Today there are many different models on sale. But experienced home craftsmen, accustomed to doing everything in the house on their own, recommend building a kitchen corner with your own hands according to drawings and diagrams. If you act step by step, with maximum effort and ingenuity, you can create a beautiful and solid corner.

We take into account the details

Before starting work, it is important to decide where the future product will be located. By selecting the right side and dimensions, we display the design in the drawing. The drawing should show the height of the seat, backrest and width of the entire product. The measurements should be as accurate as possible, since this will help to purchase in the future required quantity material.

Next important stage– choice of upholstery and filling. The best choice for kitchen products would be microfiber, synthetic material, leatherette. Experienced craftsmen advise purchasing microfiber for cladding the structure. Microfiber does not accumulate dust or moisture, it is easy to clean and keep clean. To fill the soft corner, you can purchase foam rubber, but it is better if there are polyurethane foam plates. Preparation of the structure

The DIY kitchen corner in the photo always consists of a short and a long sofa, as well as a connecting part. How many sheets of chipboard and filler panels are required is calculated according to the drawing. In order not to make a mistake in choosing the height, you can take a stool as a sample. Having prepared the materials, you should select necessary tools. Step by step instructions from experienced craftsmen, it is recommended to use the following devices in your work:

First of all, you need to cut out the structural parts from the chipboard sheets. At the end of this stage of work the following should be ready:

• 2 side parts.
• Bottom and side frame elements.
• Back and seat.
• Bar for top and seat.
• Stop element for planks.

Having prepared structural elements, it is necessary to mark points for milling and installing screws. Then we trim the ends with an edge, and the lower part with thrust bearings.

The next step is to install the box, which should consist of two side sheets and one bottom sheet. The bottom can be made of plywood. To connect all the elements of the box, it is recommended to use self-tapping screws.

Then a backrest is constructed, which is attached to the sides using dowels. To strengthen the structure, metal corners are fixed.

Construction of the short part

This part of the kitchen corner may have the following dimensions:

In order for the kitchen corner in the photo to be located as close to the wall as possible, the sharp corners on the back must be cut off. Don't forget to connect the thrust bar to the seat. As soon as the back and seat are connected using metal corners and dowels, you can attach the sides.

Final stage

The wooden base of the corner must be covered with fabric and filled with filler. First of all, you should cut the polyurethane to the size and shape of the back and seat. Two pieces of upholstery material are cut out in the same way. To prevent the filler from moving, it should be secured with glue. And the fabric - using a stapler. We pay special attention corner mounts. Before fixing the material, it must be collected inside and covered with additional pieces.

If restoration is required over time, it will be easy to reupholster the kitchen corner with your own hands. The master, knowing how the material was fixed, can easily cope with the task of updating outdated furniture.

In conclusion

If House master I decided to build a kitchen corner with my own hands, in the video step-by-step instruction presented in detail. To make the structure beautiful and durable, it is important to select high-quality chipboard sheets, upholstery fabric and filling. Before starting work, it is imperative to make a drawing that will take into account the dimensions of the structure. Further, proceeding step by step, the master will be able to build a high-quality and beautiful kitchen corner that will delight you for many years.

Eternally relevant furniture that is unlikely to ever become outdated is the kitchen corner. Acting simultaneously as an area for relaxation and dining, it allows you to properly use the kitchen space, making your stay there much more comfortable and enjoyable. It is not surprising that many people want to create a kitchen corner with their own hands. This is due to several factors, the main ones being the fairly high cost of such items and the desire to acquire a truly unique piece of furniture that you can be proud of and admire.

Before you begin the initial stages of making a kitchen corner with your own hands, you should decide where it will be located. The next step is to draw up a corresponding drawing of the kitchen corner showing all measurements (height and width of the base and back of the product). So that you do not have problems with calculating the volume of building materials and the arrangement of all parts for manufacturing components, measurements must be made with maximum accuracy. An equally important stage is the choice of fabric for upholstering the frame. The best option will become one of the following materials:

• Leatherette. Really very strong material that will last a long time.
• Synthetic fabric. Synthetics are easy to clean, retain their original color and attractive appearance for a long time.
• Microfiber. Most the best choice for the kitchen area. Its main advantages are its water-repellent and dirt-repellent properties.

When making a sofa for the kitchen with your own hands, they often give preference to soft foam seats, while hard ones are mainly used for verandas and summer kitchens. An important point When choosing the configuration of a soft kitchen corner with your own hands, it is important to correctly determine the direction of the corner: to the right or left side. To make a soft corner, all the tools necessary for the work must be purchased in advance. This is about:

• processed and laminated chipboard;
• furniture corners;
• piano hinges;
• dowels;
• confirmations;
• self-tapping screws;
• fabrics;
• filler;
• glue and stapler with staples.

Additionally, you can select building materials for decorating furniture - here everything is chosen according to your taste and color.

Designing a corner

To figure out how to make a kitchen corner with your own hands, take into account the specific stages of the work process. The first stage involves determining the type and dimensions of the entire structure, drawing up drawings and diagrams. After this, the purchase of fittings, fasteners and upholstery fabric. At the third stage, markings are made, parts are cut, tape is glued, the frame of the product is drilled and assembled. Next, the kitchen sofa is covered with fabric with your own hands and attached assembled modules. When building a kitchen corner with your own hands, try to avoid drawings with designs that do not have a separate corner module. If you try to connect the sofas with 1 corner seat, the mechanism will not be strong enough.

Click to enlarge

A do-it-yourself modular corner sofa, characterized by a quick change of configuration, is considered more reliable. It can be placed not only in the form of the letter “G”, but also in the form of a straight line. As for the size of the corner, the length and width of the corner are influenced by the area of ​​the kitchen, as well as how the furniture and appliances are placed. Speaking of sizes, any corner sofa for a kitchen with your own hands must meet the following indicators (applies to the seat):

• height - 45cm;
• depth - 50cm;
• the length of the small and large sofas is 120 and 200 cm.

Speaking about how to make a high-quality corner sofa for the kitchen with your own hands, which will be identical to an industrial product, it will not be superfluous to use chipboard cutting.

All modern furniture workshops offer similar services. This will significantly simplify and speed up the work process.

Installing a long sofa

The first step is usually to install a long sofa in the kitchen with your own hands. You need to take the chipboard and cut out all the elements that are marked in the drawing:

• 2 sides;
• frame bottom;
• outer and side parts;
• seat;
• back;
• board for the seat and top of the product.

Installation work on constructing a sofa begins with the sides. First, marks are made for milling, while the main parameters of the product are taken into account. After this, you need to mark the recesses for fasteners and points of connection with other elements. Next comes the construction of a niche - it is also a box, which is a stiffening rib. Take 2 sheets of chipboard or plywood for the sides and 1 for the bottom. Cut out the parts corresponding to the measurements and connect them with self-tapping screws. You should get ordinary wooden box. To secure the lifting seat, use a special bar, which should be held on the dowels. Her standard size is 96 by 100 cm. Invent a backrest and attach it to the sides using dowels, and then attach the main and auxiliary strips.

The last step is to secure the corners. To make a sofa with your own hands, use metal bars that will provide reliable fastening designs. After assembling the base of the product, he proceeds to covering the sofa. Cut 2 pieces of foam rubber so that they match the size of the seat and back, and 2 pieces of finishing material. It is recommended to use glue to fix the filling, and a stapler for upholstery materials.

Please note that when tucking the fabric at the corners, you first need to wrap it in the middle, and then hide it with the side pieces of upholstery.

Assembling the remaining parts

Now you know how to make a long sofa. After installing it, proceed to installing a short sofa. It is produced in the same way, except for the dimensions furniture product– its length is 40 cm shorter. Everything else remains unchanged.

When making a corner for the kitchen with your own hands, an important part that combines the long and short sofas, is connecting element. It can be made in the form of a corner from pallets. According to the measurements taken, cut out all the necessary parts for the seat and back from the chipboard. Connect them together using screws or dowels. Next, cut out the bar for the stop and fasten it to the seat.

Please note that when making a kitchen corner from wood with your own hands, the side parts should be attached after the seat and back have been given the proper appearance. The first step is to secure the parts of the back and sides, and then switch to the seat and frame. It is important to note that all fastenings are made using metal corners.

The next step is to secure the foam rubber and cover the product with fabric, which must be fixed with a stapler. This is how you assemble kitchen corners with your own hands. Due to the fact that the corner you make will be collapsible, all 3 elements can be moved and rearranged if necessary. If you want, you can connect all the main parts and make the structure whole. How to do it? Metal corners will come to your aid!

You also have the opportunity to improve your soft corner for kitchen room, because this softest corner for the kitchen can be equipped with a sleeping place, as in a simple folding sofa. To make a corner with a sleeping place with your own hands, there is no need to disassemble the entire structure or remake its components. You just need to slightly change the long sofa by adding 1 more sheet of chipboard, permanent hinges and lots and lots of foam rubber, and you will get a wonderful kitchen corner with a sleeping place.

Conclusion

Despite the fact that the hand-made production of such furniture is a very meticulous process that requires maximum attention and responsibility, the manufacturing technology is accessible even to a novice craftsman. As a result, you will be able to get a truly multifunctional, and most importantly, an individual piece of furniture, thanks to which your kitchen will become more cozy, comfortable and sophisticated. Such cushioned furniture will be wonderful final chord, which will complement the interior of the kitchen and give it an attractive look. Due to the neatness and ergonomics of the set, up to 6 people can fit here, and the corner will not take up too much space. A soft corner is a real boon for a kitchen with a small area. Here you can gather with the whole family and have a tea party, spending time in a pleasant, warm atmosphere.