Baxi ECO Four wall-mounted gas boilers. Baxi gas boilers: review, device, model range.

Vladimir50

Question for specialists or craftsmen - practitioners.
I have a baxi eco four 24 f boiler, it worked almost normally for two years (except for a drop in pressure due to a leak in the heating system, they found it, fixed it, pumped it up through the valve - everything became normal), but five days ago it suddenly hissed from the emergency tap water began to flow when the pressure was released. Reduced the pressure to "0". I pumped water into the heating system to a pressure of 1 Bar (dark green triangular sector). The boiler started working, but when the temperature set on the display increased to 62 degrees. C, the pressure again rose to three bar and an emergency discharge of water from the boiler occurred.
I set the temperature to 50 degrees. C, the boiler is working, the pressure is slightly below three bar but it works. When I try to set it to 60 degrees. C (in our cold weather last year it stood at a temperature of 65 Ga. C.), the pressure rose again and was released again through the emergency valve. Thus, it can only operate in the temperature range of 50-55 degrees C of water in the heating system. The hot water supply is working fine so far. According to the instructions, I checked the pressure in the expansion tank (it is located on the back wall of the boiler in red, at the top there is a nipple under a red screw-on cap), it is 0.45 Bar, that is, almost normal (in the instructions 0.5 Bar). Again I pumped water into the system before the start of the 1 Bar sector, started it at a temperature of 60 Degrees C, - pressure - Three Bar, again an emergency release. When the temperature set on the display is 50 degrees. S., the pressure does not “creep” to three bar (about 2.8 and the boiler continues to work normally, but there will be frost soon and what to do next?
Has anyone encountered this problem? Please tell me? Previously, the pressure on the sensor did not go beyond the dark green sector of 1 Bar at any coolant temperature set to the boiler. By the way, my neighbors in the house (apartments with individual heating) also cost Baksi, almost all of them had problems after a year or two, for some the boiler exploded (thank God there were no casualties, but there was a fire), for others it was always leaking, for others there were problems with the hot water supply, for others the boards or sensors were flying, for some They go out on their own and do not start without calling this company. - installer. Who can say whether this is the quality of the manufacturer of these boilers, the Baksi company, or a fault of the company that installed them for us (Teplocenter LLC)? These guys were already screwing me over when I called them, saying that it would all go away on its own, so it would work a little longer at this temperature and it would be possible to raise the temperature further in case of frost. They told me that on next year they want to refuse to service these boilers in our house, since it is not very profitable for them, three calls every day, spare parts are expensive, and we pay them very little for service.
Sincerely, Vladimir

Very important advantage Baksi boilers have a very affordable price and this with technical characteristics that meet the highest world standards. The quality of Baxi gas boilers was appreciated by both consumers and specialists.

Why this manufacturer?

1. The assortment is diverse: this and double-circuit boilers baksi, and single-circuit; atmospheric, condensation, . Regardless of the model, Baxi boilers extremely reliable and easy to use.
2. Baksi gas boilers are manufactured using high technology, so they are safe from all points of view. The boilers have several degrees of protection and are maximally adapted to domestic conditions.
3. Baxi boilers are available in both wall-mounted and floor-standing versions.
4. One of important features Baxi heating boilers - efficiency. The device pays for itself very quickly, using fuel sparingly.
5. According to the latest market research, Baxi boilers are the third most popular in the world.

Double-circuit boilers - models, description, cost

There are a lot of series of Baksi double-circuit boilers and they are constantly updated.

For example, it is very popular FOURTECH series, the main features of which are:

1) Electronic modulation of heating and hot water supply modes.
2) Electronic ignition.
3) Full adaptation of boilers to domestic conditions: boilers operate reliably when gas pressure drops to five millibars.
4) Air supply regulation system.
5) Flame breakers made of of stainless steel.
6) Possibility of working on liquefied gas.

Among the models in this series, we can highlight the Baxi FOURTECH 24 F - a gas double-circuit boiler with a combustion chamber closed type. The device is used for space heating and hot water supply. There is a six-liter expansion tank.

The heat exchanger is made of stainless steel. The Baksi FOURTECH 24 F boiler is equipped with an electronic control system with a display.

• Boiler power – 24 kW
• Price - 25,038 rubles.

Wall-mounted boiler NUVOLA-3 Comfort

Another series of Baxi double-circuit boilers is NUVOLA-3 Comfort, which has the following general characteristics:

1) Electronic ignition.
2) Patented air supply system.
3) Possibility of switching the system to work from liquefied gas.
4) Electronic control.
5) Full adaptation to extreme operating conditions.

The series includes several models, but the most popular is the BAXI NUVOLA3 Comfort 240 Fi. The boiler is wall-mounted, double-circuit, with a protection system.

• Power – 24.4 Kilowatt
• closed combustion chamber
• DHW capacity – 14 liters per minute
• Efficiency – 92.2 percent
• built-in boiler.
• The cost of the Baksi NUVOLA3 Comfort 240 Fi boiler is from 46,027 rubles. up to 57,072 rub.

Baksi wall-mounted boilers - models, description, cost

Baksi wall-mounted gas boilers are not only very easy to use, they also look very impressive and will easily fit into any interior. The devices weigh little and show excellent efficiency.

Installing a Baxi wall-mounted boiler is easy; most models are equipped with an electronic control system. Among the Baksi wall-mounted boilers, there are budget ones, and there are also elite-level models.

Inexpensive Italian boiler ECO Four

Budget models include the Baxi ECO Four 1.24, costing only 21,500 rubles. At a low price, the device has very decent characteristics:

1) Power – 10.6 kW.
2) Heat exchanger made of stainless steel.
3) Open combustion chamber.
4) Electronic ignition.
5) Flame modulation in hot water supply and heating modes.
6) “Warm floor” mode.
7) Possibility of working on liquefied gas.
8) Unique automation that responds to weather changes (sensor sold separately).
9) Flame control.

NUVOLA 3 COMFORT 320 Fi

Model wall-mounted boiler The elite level Baxi is the Baxi NUVOLA 3 COMFORT 320 Fi. The heating output of the device is phenomenal 34.5 kW; hot water capacity – 18.3 liters per minute. At the same time, gas consumption is only 3.65 cubic meters at one o'clock.

The heat exchanger is made of high quality stainless steel, the combustion chamber is closed.

From unique features of Baxi NUVOLA 3 COMFORT 320 Fi is a removable digital panel that also serves as a room temperature sensor. The storage boiler with which the boiler is equipped has a volume of sixty liters and is made of stainless steel.

The cost of Baxi NUVOLA 3 COMFORT 320 Fi is about 60 thousand rubles.

One of the most popular models in the Baksi line is BAXI Eco Four 24 F. The advantage of this model is that the boiler continues to operate even if the water is turned off: the coolant is already present in the system.

In the event of a gas or electricity failure, the boiler will turn off automatically. In order for the boiler to last longer, it is advisable to install a voltage stabilizer and a water filter.

The Baxi Eco For 24 F boiler regulates the temperature automatically, and when the temperature in the room meets the set parameters, it turns off on its own, then turns on again.

Specifications:

1) Power – 24 kW.
2) Closed combustion chamber.
3) Power supply – 220 Volts.
4) Pressure in the hot water supply circuit – 8 Bar.
5) Hot water capacity – 13 liters per minute.
6) Option “Warm floor”.
7) Efficiency – 92 percent.
8) Expansion tank – 6 liters.
9) Descent protection system gas pressure, lack of traction, liquid freezing, shutdown electrical energy and so on.
10) The weight of the boiler is 33 kilograms.
11)Cost - from 27,440 rubles. up to 35,190 rub.

Baxi Main is a very compact model for apartments and houses

Baksi Main is a series of inexpensive, but extremely reliable and convenient wall-mounted gas heating boilers. The series belongs to the fourth generation of the Baxi company, and is a continuation of the most popular series in Russia “Mine Digit”.

The Baxi Main Four 24 double-circuit wall-mounted boiler has compact dimensions, making it easy to install in the smallest rooms.

The control panel is equipped with a digital LCD display with push-button control, which greatly facilitates working with the boiler.

Characteristics:

1) Open combustion chamber.
2) Bithermic heat exchanger.
3) Electronic anti-scale system.
4) Heating area – at least 240 square meters.
5) Power – 24 kW.
6) Efficiency -92 percent.

Particularly worth noting is the cost, which, for all its excellent characteristics, low: only 19,547 rubles.

Baksi Slim - review, characteristics, cost

The Slim series of the Baksi company is fifteen models of double-circuit and single-circuit heating gas boilers with a capacity of fifteen to sixty-two kilowatts. The most powerful representative of the series is Baxi Slim 1.620 iN.

The model is a single-circuit boiler, that is, it is designed exclusively for heating a room. The heat exchanger of the device is made of wear-resistant cast iron and retains heat excellently.

The Baksi Slim 1.620 iN boiler runs on natural gas, but it is possible to adapt it to liquefied (cylinder) gas. It is possible to add a capacitive boiler to the boiler, thus converting it into production hot water.

The boiler has small size(the width of the device is only thirty-five centimeters) and is capable of heating large rooms.

The boiler is extremely easy to use thanks to the electronic ignition system, maintenance temperature regime. Baxi Slim 1.620 iN is equipped with a special diagnostic system that promptly detects all problems.

Characteristics:

1) Power – 62.2 kW.
2) Chimney (diameter) – 180 mm.
3) Simulated burner.

Cost of gas floor single-circuit boiler Baxi Slim 1,620 In is 69,605 rubles.

Baxi Luna for heating and hot water supply

Luna series of gas boilers from the world's leading manufacturer heating equipment- Baxi company, is distinguished by increased reliability and affordable prices.

One of the most popular devices in this series is the wall-mounted gas boiler Baksi Luna 3 280 Fi, used for heating and hot water private houses and apartments.

The heat exchanger is made of high quality stainless steel, resistant to corrosion. The boiler has two temperature control modes (including the “Warm Floor” mode).

Housing protection – class X5D. The device's self-diagnosis system helps to achieve maximum comfort in operation of the boiler.

Characteristics:

1) Power -28 kW.
2) Efficiency – 93 percent.
3) Expansion tank – 10 liters.
4) Consumption natural gas– 3.18 cubic meters per hour.
5) Energy consumption per month – thirty-nine kilowatt-hours.
6) Minimum temperature prepared hot water – 35 degrees; maximum – 85 degrees Celsius.
7) Water capacity – 16 liters per minute.
8) Built-in “Summer” mode.

The average price of the Baxi Luna 3 280 Fi heating boiler is RUB 36,500.

What do buyers say? Are these boilers really trustworthy?

Valery, 29 years old, Zheleznodorozhny.

I have been using the Baksi Eco24 boiler for the second year now. In principle, the device works well: a house with an area of ​​100 meters heats perfectly.

But there are problems with hot water - the water is either barely warm, or boiling water is pouring. Probably some adjustments are needed. I'm going to contact the service center.

Alexander, 40 years old, Tambov region.

BAXI Luna3 Comfort is a great boiler. True, it's not cheap, but it's worth it. The house is now warm, with hot water, which I take from the well with the help of pumping station. Just imagine - there was a house with a stove, and now with full gas heating.

Another level of life. As for the boiler, the main thing is to correctly install and configure the parameters. I've been working for three years now and have had no problems.

Rustam, 62 years old, Kazan.

I have been using the Baxi Luna 3 280 Fi for six months now. When it was minus twenty-five outside, the relay began to jam. The heating of the water is uneven, so the boiler did not live up to expectations.

Ivan, 45 years old, Moscow region.

The BAXI LUNA HT1.650 boiler is beyond praise. He successfully “plowed” for four years and continues in the same spirit. Saved a lot of money on electricity and gas. I recommend to everyone.

Irina, 35 years old, Moscow.

The question arose of heating a large room - a mini-workshop. All communications - gas, water, electricity - are available, and central heating- No. Good people advised to install Baksi Slim 1.620 iN. Installed. Works like a clock. In the workshop there is always the same temperature, comfortable for work.

As you can see, opinions are divided among users. People also note some problems associated with boilers. However, these problems are most likely associated with incorrect settings and incorrect operation.

If you are not sure that you can install the boiler yourself correctly, you should contact a specialist.

Gas wall-mounted boiler Baxi Eco Four 24 of the fourth generation. The model is characterized by ease of installation, simple maintenance and versatility of operation. The use of modern technological innovations makes use comfortable and safe: a wide liquid crystal display constantly displays the current state of the boiler in real time, maintains automatically set parameters, and performs an emergency shutdown in the event of a drop in water pressure or gas pressure.

Description of the gas wall-mounted boiler Baxi Eco Four 24

• Baxi Eco Four 24 is a high-power 2400 W double-circuit turbo boiler.
• A modified copy of the ECO-3 Compact series of compact units, well known to users.

• The model has been improved without increasing the compact design, the dimensions are kept within 730 x 400 x 299 mm.
• Closed combustion chamber.
• The brass hydraulic group increases the cost of the unit, but extends the service life by 100% compared to conventional metal water supplies.
• Push-button control and control. The buttons are located on the front panel.
• LCD screen for information about the operating status of the column. Highlighting and tabulation are clear and easy to read. Serves to provide information in real time and to set the mode.
• A boiler with a turbo system is easy to operate and easy to maintain.

Technical parameters of Baxi Eco Four 24

• The maximum useful thermal power is 2400W.
• The minimum value of useful thermal power is 9300 W.
• Maximum power consumption 2580 W.
• Minimum power consumption 1060 W.
• Type of energy carrier used: natural or liquefied gas.

• Maximum natural gas consumption 2730 l/h.
• Maximum liquefied gas consumption 2000 l/h.
• Maximum efficiency of 92.9%.
• Working at a third of the force gives power with an efficiency of 90.4%.
• The filling pressure of the expansion tank is from 6 to 8 l/bar.
• The heating temperature range in the circuit is from 35 to 60 C.
• Productivity for hot water at a temperature of 25 C is 13.7 l/min.
• Productivity for hot water at a temperature of 35 C is 9.4 l/min.
• Minimum water supply to the DHW circuit is 2 l/min.
• Pressure in the DHW circuit max|min 8|0/15 bar.
• Smoke exhaust pipes: diameter of coaxial 6-10 cm, separate 8 cm.
• Maximum total length of outlet pipes: coaxial 500 cm, separate 3000 cm.
• Recommended natural gas pressure is 13-20 Mbar.
• Power supply 130 W, 230 V.
• Electrical protection class IPX5D.
• Overall dimensions 40 x 73 x 29.9 cm.
• Weight 36 kg.

Description of the gas system of the Baxi Eco Four 24 turbo boiler

• Highly efficient performance on both natural and liquefied gas.
• Constant, uninterrupted electronic flame support in hot water supply and heating modes.
• Ignition is smooth, electronic.
• The boiler has been adapted to work in local regions. Gives stable performance when pressure drops to 5 Mbar.
• Burner divider made of stainless steel.
• The air flow supply and regulation system is patented.

Description and characteristics of the Baxi Eco Four 24 hydraulic system

• Control of hot water consumption with a separate water meter.
• The copper heat exchanger for the primary stage is additionally protected against corrosion.
• The circulation pump is energy-saving, with built-in automation on the air vent.
• The plate heat exchanger for the secondary stage is made of stainless metal alloys.
• Valve made of brass, three-way, with electric servo drive.
• Pressure gauge with a convenient scale and graduation.
• Baylas automatic.
• Post-circulation pump.
• Login filter cold water. Cleans from large particles up to 5 microns.
• The automatic system tests the dispenser for anti-blocking of the pump and three-way valve after 24 hours.
• It is possible to reconnect to solar collectors.

Features of temperature control of the Baxi Eco Four 24 boiler

• Digital temperature display.
• There is a function for connecting a programmable timer and thermostat for internal use.
• Automation taking into account weather conditions outside. It is possible to connect a sensor to display information about the temperature outside.
• Adjustment and automatic maintenance of temperature conditions in the DHW heating circuit.
• Two-range temperature control in the heating system from 35 C to 85 C. It is possible to use a column for a heated floor system from 30 C to 45 C.

Maintaining control and ensuring safety when using Baxi Eco Four 24

• Liquid crystal display with push-button control.
• Self-diagnosis of the system is electronic.
• If the user wishes, the installation blocking signal is output to the control panel.
• Control of combustion and flame composition using an ionization system.
• Primary heat exchanger with a protective thermostat against overheating and boiling of water in the system.
• A special pneumatic relay-type control sensor for the removal of combustion products.
• Insufficient water pressure causes the pressure switch to trip.

The Baxi ECO Four 24 F brand boiler is fourth-generation equipment with compact dimensions, which is why it is so popular today among consumers who want to install a hot water supply system in a private home and use hot water. Because the unit is designed to be mounted on a wall, it will not take up much space; moreover, the space underneath can also be used. The device has closed chamber combustion and separate heat exchangers.

The unit is intended for heating premises whose area can reach 240 m2. Among other things, this equipment can be used to provide a home with hot water supply at a temperature of 25°, which will be supplied in a volume of 13.7 l/min. For ease of control, the boiler is equipped with a liquid crystal display, which displays data that allows you to control the operating parameters of the device. Among other things, using this interactive you can receive information about failures and operational errors that have occurred. According to users who have been using such devices for many years, this addition can be called very convenient, since only a professional can troubleshoot without a display.

Specifications

The Baxi ECO Four 24 F has a minimum net power of 9.3 kilowatts, while the maximum possible net power is 24 kilowatts. The efficiency of the device is 91.2%. You may also be interested in the maximum consumption of natural and In the first case, this value is limited to 2.78 m 3 / h, while in the second it is equal to 2.04 kg / h. The device has a capacity of 6 liters, and the chimney diameter is 120 mm. The device operates on a 220 V mains voltage, but the output is 80 W. The equipment operates quite silently, the noise level generated is 29 dB.

Features of heating and hot water supply

Baxi ECO Four 24 F has two heat exchangers, which are separate. One of them is made of copper, while the other is made of stainless steel. The system can maintain a maximum possible pressure of 3 bar. The device is equipped with the Grundfos brand; among other things, the user can use antifreeze during operation. The heated volume reaches 672 m3. The heating system can maintain a minimum and maximum temperature, this range varies from 35 to 85°. Baxi ECO Four 24 F can heat hot water up to a maximum of 60°, but the lowest hot water temperature is 35°. At temperatures ranging from 25 to 35°, the performance of the hot water supply system will remain unchanged, it was mentioned above and is 13.7 liters. It is noteworthy that this equipment can operate in summer mode.

Weight, dimensions and connection features

Before purchasing this model, you should ask what dimensions it has. Thus, the height, width and depth of the device are 730 x 400 x 299 mm. The weight of the device is 29 kg. To connect the system, you must know about the inlet and outlet diameters of cold and hot water. They are limited to 0.5 inches while the diameter is 15 mm. The supply direction of the heating circuit is connected using a 3/4 inch pipe, which is 20 mm in diameter. The reverse direction of the heating circuit is characterized by the same indicators as the gas supply.

Characteristics of the gas and hydraulic system

Baxi ECO Four 24 F, the characteristics of which are presented in the article and will allow you to decide on the choice of a specific model, is distinguished by the features of gas and If we consider the first of them, we can note that there is flame modulation, the material of the divider is stainless steel. Gas system adapted and capable of operating at fuel pressures from 5 mbar. If a special kit is present, the boiler can be converted to operate on liquefied gas. As for the hydraulic system, it has heat exchangers, one of which is made of stainless steel and is intended for the hot water supply circuit. But a copper heat exchanger is used for the heating circuit. The inside is made of brass. Among other things, a filter is installed at the outlet of the hot water supply circuit. The energy-saving circulation pump operates at high speeds. If necessary, you can connect an external storage boiler, and The device also has an auto-bypass, as well as a pressure gauge, which is the post-circulation of the pump.

Temperature Control Features

The wall-mounted boiler Baxi ECO Four 24 F allows you to regulate the temperature in two levels; in a heating system this limit can vary from 30 to 85°, while for the heated floor mode the parameters vary from 30 to 45°. There is weather-compensating built-in automation inside; in addition, the user has the opportunity to connect an outside temperature sensor. In heating and hot water circuits you can automatically control the temperature and also regulate it. Temperature control ensures timely receipt of information about the temperature in the hot water supply system and heating circuits. The user can connect room thermostat and a programmable timer.

Control characteristics and safety devices

Baxi ECO Four 24 F, which has only the most positive reviews, has a self-diagnosis system, as well as ionization flame control. The equipment signals when stopped when connected to the dispatcher's console. You can use the anti-lock feature pumping equipment, and the switching period is 24 hours. The primary heat exchanger contains a protective thermostat, but a pressure switch in the heating system is necessary to give a signal when there is insufficient water pressure.

Specifications

Boiler type gas, convection Burner

?

Combined wood/gas, wood/diesel boilers are usually supplied without a burner included. The boiler will operate on solid fuel and you can additionally purchase an appropriate burner to operate on gas or diesel fuel. For a diesel/gas combination boiler supplied without a burner, a suitable burner must be purchased and installed because the boiler will not operate without the burner.

gas Number of circuits double-circuit Thermal power

?

Power is the main parameter when choosing a heating boiler. Need to calculate power heating system individually for each house, since it depends on the heated area, heat loss of the house, the average temperature in the region during the cold season. Glossary of terms for the category Heating boilers

9.30 - 24 kW 10.60 - 25.80 kW Combustion chamber closed Efficiency 92.9% Control

?

The heating boiler may have an electronic or mechanical control. Manufacturers may also offer to purchase one of several control panels to choose from for the heating boiler. The control panel can be purchased separately or when purchasing a heating boiler. It is important to remember that without a control panel the boiler will not work. Glossary of terms for the category Heating boilers

electronic Wall installation Primary heat exchanger material copper Mains voltage single phase Built-in circulation pump There is Built-in expansion tank yes, 6 l Fuel

?

The fuel for solid fuel heating boilers is: firewood, pellets, coal, peat, coke and briquettes - wood, coal, peat. Liquid fuel boilers can operate on diesel fuel, fuel oil, waste oil. Combination heating boilers can use as the main fuel solid fuel, as well as operate on natural gas or liquid fuel. Glossary of terms for the category Heating boilers

natural gas, liquefied gas Natural gas consumption 2.73 cu.m. m/hour Liquefied gas consumption 2 kg/hour Nominal pressure of natural gas 13 - 20 mbar Coolant temperature 30 - 85 °C Temperature in DHW circuit 35 - 60 °C Hot water output at 25°C 13.7 l/min Hot water output at 35°C 9.4 l/min Max. water pressure in the DHW circuit 8 bar Max. water pressure in the heating circuit 3 bar

Comfort

Functions power indicator, pressure gauge, auto-ignition, flame modulation Peculiarities display, connection of external control, connection of heated floor

Safety

Protection autodiagnostics, gas control, overheating protection, frost prevention mode, safety valve, air vent, pump blocking protection Filtration water filter

Connection

Heating circuit connection pipe 3/4" Diameter coaxial chimney 60/100 mm Dimensions (WxHxD) 400x730x299 mm Weight 33 kg

Please check before purchasing specifications and equipment from the seller