Compact low heating radiators

Low radiators are intended for installation of heating in private and apartment buildings, as well as in administrative panel buildings and office premises. Panoramic windows are installed in rooms that are intended for meeting guests and clients, as well as in private units for a panoramic view in bedrooms, living rooms and in offices.

This type of glazing assumes a presentable appearance and multifunctional qualities of windows. Usually panoramic windows are installed with the maximum coverage of the area of ​​the intended glazing. Often there are absolutely glass facades in buildings that require the installation of specialized heating equipment.

Low heating radiators

Large batteries, which have a standard modification, are acceptable only for rooms with high window frames located in the middle of the plane of the walls and having ordinary parameters.

However, if the location and dimensions of the windows differ significantly from the standard ones and do not fit into the features of the space and interior, then between the floor and the plane of the walls, specialized heating batteries are used, which are called "low heating radiators".

Narrow radiators

When purchasing this type of product, it is very important to pay attention to the reliability and quality of radiators, as well as to the metal alloy and structural features.

High-quality heating radiators, first of all, must be made of safe materials and not emit substances harmful to humans into the air, and must comply with certification standards.

High quality products are distinguished by such certificates as: ISO 9001: 2000.

The appearance of low heating radiators


The modern production market offers various designs and color solutions for heating radiators. And also this type of product can be selected according to the following parameters:

  • to size;
  • optimal length;
  • convenient width;
  • required power;
  • and also by the number of sections.

In terms of technical parameters, this type of product is suitable for equipping heating systems in any premises. One of the undoubted advantages of these devices is the high-quality final finishing of the surface coating of heating radiators. This can be a specialized varnish, spraying or paint.

This nuance provides resistance to corrosive processes, and this treatment does not require regular painting and other types of maintenance. High-quality devices in this direction save up to 30 percent in material costs for heating needs.

Radiators are produced in a variety of options to meet the different requirements and preferences of customers for this type of product. Such an assortment allows you to choose the most successful option for installing low batteries in a certain room, moreover, it is beneficial both during installation and is suitable for certain heating systems.

Types of products


Narrow heating radiators are divided into several types and differ in connection methods.

This type of heating radiators for panoramic windows is:

  • low cast iron radiator;
  • floor heating radiator;
  • low steel heating radiator;
  • aluminum radiator product;
  • bimetallic section.

There are one-pipe and two-pipe heating designs with different types of circulation. The advantage of low heating devices is that they have a small volume of water, therefore, they are able to react rather quickly to temperature changes in heating.

The sizes of these products range from 20 to 50 centimeters. The most common type of radiators in this category are bimetallic devices.

Cast iron products have a sturdy body, this product has durable characteristics and wear resistance. The disadvantage of such devices is the corrosive properties of the alloy in contact with alternative types of fluids for heating and not the most aesthetic appearance.

Another feature of cast iron radiators is that the maximum pressure in the heating system should not exceed 9 atmospheres. Therefore, such devices cannot be installed in high-rise buildings.

Due to the fact that the production of cast-iron radiators involves a product with a rough surface at the exit, over time, the inner walls of the radiators are covered with a layer of debris. And a layer is formed that weakens the fluidity of the fluid within the system.

However, such products have quite a few positive aspects, for example, cast iron perfectly retains heat and does not collapse under the influence of water.

Low heating radiators for panoramic windows made of steel

Rolled steel products are produced in an unusual way, namely the production takes place by welding steel plates with steel pipes. The disadvantage of this design is the high heat loss due to the design features.

To eliminate this nuance, small case radiators are constructed from steel plates, while heating water passes not only through the radiator pipes, but also in the metal device case. Thanks to this design, the heat transfer of the unit is quite high.

The disadvantage of a low unit is considered to be low strength during water hammer, this is due to the presence of welded seams and joints. And also the corrosive features of steel are much inferior to other materials that are used in the manufacture of heating products.

Another significant disadvantage of steel products is their high cost, which is explained by the laboriousness of production, and the use of steel semi-finished products, which must be resistant to corrosion. Heat transfer properties are similar to cast iron devices.

Low aluminum heating radiators

Aluminum batteries are produced in several ways, the most common is casting aluminum radiators, and extrusion or welding of aluminum plates is also possible. This type of product is of fairly high quality and excellent physical characteristics. The main advantage of low products is the low weight and anti-corrosion properties of aluminum.

The ability to withstand high pressure in the water heating system of an aluminum radiator is much higher compared to other types of low batteries. However, in terms of heat retention, this type of product is inferior to other materials. And also aluminum products are inferior in strength to steel radiators. Such disadvantages of products of this direction can lead to a heating leak.

Low bimetal heating radiators

This type of radiator is one of the most common types of batteries. This type of product has excellent performance and attractive appearance. The technological features of the production of this product correspond to the latest developments in metallurgy.

Bimetallic products are made from a specialized alloy and are suitable for use in various conditions, including equipping heating systems in skyscrapers and other unique buildings where high strength material is required. The long service life of narrow bimetallic devices is also very long.

Using bimetallic batteries, you do not have to worry about the radiators spoiling the unique interior of the room. Due to its presentable appearance, this type of product is suitable even for the design of first-class apartments.

A narrow radiator also has disadvantages, which include rapid cooling of the device and a rather high cost. However, the small size and attractive appearance make up for these disadvantages.

Floor heating radiators low

Very often, rooms with panoramic windows are heated using floor convectors. This type of heating is considered fashionable and modern. This heating equipment fits well into any design and is perfect for rooms with panoramic views.

Because they do not obstruct the view and perfectly cope with the tasks of space heating. Low heating radiators for panoramic windows are a great option for any home and interior.