How can you get pits from cherries? How to remove pits from cherries at home

" Cherry

Cherries grow on almost every homestead and summer cottage. Gardeners' favorite berry blooms before the first leaves appear.

It is believed that cherry blossoms symbolize the purity of existence. That is why in some images of Madonnas, babies are holding cherries in their hands.

Ripe purple and red berries are not only beautiful, but extremely beneficial for the body. A good housewife always stores berries for the period until the next harvest.

It is better to harvest cherries for the winter without pits., since they contain a small amount of a substance that turns into hydrocyanic acid. In addition, it is more convenient to eat cherries, prepare baked goods and other dishes without seeds.

There are several ways how to quickly remove seeds:

• manually, using sticks, paper clips and other devices;
• semi-mechanical. A device with which the berry is inserted one piece at a time and the seed is pushed out;
• mechanical. The cherries are poured into a container and the pulp is removed by pressing the lever;
• electrical equipment for separating seeds.

Based on the volume of harvest, wishes and free time, housewives independently decide what device they need to remove unnecessary drupes.

Removing pits manually

• open paperclip or hairpin. Holding the berry with your fingers, pry it from the side of the stalk and remove the seed. The advantage of this method is that the hole on the berry is only on one side and the cherry loses less juice. At the same time, it takes a lot of time, your hands are dirty with cherry juice;

• using a pointed stick. The cherry is pierced with a pointed stick and the pit is pushed through. The process is quite labor-intensive, in addition, more juice flows out compared to the first method;

• using a stick and a bottle with a narrow neck. Place a berry on the neck of the bottle and push the seed through with a stick. The stone falls into the bottle, the cherry remains on the neck. Enough original way, but a lot of juice flows out. Take a lot of time.

Three ways to quickly remove pits from cherries!

Semi-mechanical devices to clean berries

The semi-mechanical method is a device for squeezing out seeds. Affordable devices.

The method of squeezing out a seed involves inserting a berry into a round container, pressing a metal rod, and pushing the seed through. The removal speed increases slightly, but still for the most part, This manual method.

Kostodavy are produced by many commodity producers. An improved example of a bone cutter - a machine from Chinese manufacturers Cherry Remove. It allows you to peel six berries at the same time.

Cherries are inserted into special rounded containers with a hole at the bottom for the bones. At the bottom there is a closed container where the seed is squeezed out and the juice is collected.

The second part of the device is a cover on which there are six metal rods with jagged tips.

The lid is lowered and 6 seeds are squeezed out at once.. It is convenient because the speed of the process increases and the juice does not spread, but is collected in a container.

Mechanical cleaning device

Mechanical method Removing pits from cherries comes down to pouring the berries into a container. With the help of a chute, one at a time moves towards the nest for cleaning.

The bone is removed by pressing the springy lever from above and falls into plastic container. The berry falls through another chute into a separate bowl.

All plastic elements of the device are made from tested food materials. Metal parts, such as extrusion rods, are made of metal that does not oxidize.

Let's look at some samples:

• Cherry Corer pitting machine. Housing made of food grade plastic. Metal rod made of of stainless steel. Compact, equipped with a special device for fixing to the surface in the form of silicone inserts. Easy to clean and leaves no traces of juice on the table;

• Cherry and Olive corer. It differs from the previous version in the material of food-grade plastic. It is translucent, which allows you to monitor and control the process;

• Cherry pitter Leifheit. German manufacturer. The principle of operation is the same as everyone else's mechanical machines OK. It features a softer lever stroke and a transparent container for collecting seeds.

Mechanical machines for extracting pits from cherries significantly speed up the process of processing cherries. They do not leave any dirt, the juice flows into the container.

Convenient to use, safe. You can entrust your grandchildren with this interesting activity. Affordable. Easy to clean. In an hour, using these devices you can process a bucket of cherries.

Cherry pitting machine

Electric separators

Cars with electric drive for removing pits from cherries used most often for large volumes.

The operating principle of the machine: the berries are poured into a wide feed chute, where they are distributed in a row. Through the chute, the cherries fall onto a rotating drum, plastic or metal.

The drum is equipped with recesses for fixing the cherry. Synchronously with the movement of the drum, metal rods are lowered and push out the bone.

The berry remains on the toothed rod, after which it is sent to a collecting container. The process is continuous.

The drum is closed by a removable metal casing. All parts of the equipment are made of stainless food alloys. Easy to clean, parts can be disassembled and washed.

Cost of electrical equipment differs significantly from mechanical machines for extracting seeds.

Pit removal machine for cherries, cherries and cherry plums 100 kg/hour, Uzhgorod. Adapted for removing seeds of different diameters. Processes up to 100 kg/hour. The inner drum-membrane is made of plastic. The case is collapsible.

German Shelden pitting machine. Productivity 70-90 kg/hour. The operating principle is the same, additionally equipped with stainless steel containers for receiving pitted cherries.

Cherry puree as a means to separate the pulp

To make cherry puree You can use a chopper or blender. It is enough to lightly twist the berries to separate them from the drupe. Then rub through a colander.

The bones will remain in the colander, and the puree will remain in the container. The results are excellent mousses and jelly.

Advantages and disadvantages of improvised devices

Each of the methods discussed helps to remove the pit from the cherry. Let's consider from the point of view of advantages and disadvantages.

Manual pitting:

• advantages: does not require any additional costs. Pierces the cherry on only one side, resulting in a juicier berry;
• disadvantages: takes a lot of time. The juice splashes around the treatment area and stains your hands.

Semi-mechanical method: not much different from manual, the process is only slightly accelerated.

Mechanical method of removing seeds:

• advantages: for your own household This best option. The machine is inexpensive. The speed of berry processing increases significantly. The juice does not spread or splash. Convenient to use. Compact and easy to clean;
• flaws. Sometimes berries accumulate in the feeding mechanism and need to be sorted manually.

Electrical equipment for stone removal:

• dignity. The speed and volume of processing is undoubtedly the main advantage of the equipment;
• flaws. High price. For home use there is no need to purchase such equipment, but it is justified for small industries, cafes, restaurants, etc.

Cherry is the most common berry. Possesses healing properties. The berry contains a lot of vitamin amino acids, microelements, and pectins.

Cherry increases hemoglobin content, thins the blood, and is useful for lung and kidney diseases. Has a tonic and restorative effect.

Cherries are useful in any processed form. Pitted cherry jam in winter will remind you of summer days at the dacha. Cherry juice will replenish the body with vitamins in the winter and spring seasons.

Frozen cherries will be a wonderful filling for homemade baked goods, so every housewife will need a pitting device.

A rich fruit harvest is not only joy, but also numerous efforts to process it. Even if you have to buy fruit at the market or in a supermarket, you can’t help but take advantage of the seasonal price drop in order to prepare fruit for the winter or prepare fruit dishes more often.

During the cherry ripening season, the topic of how to remove pits from cherries at home begins to be actively discussed among housewives. Is it necessary to do this and how to do it faster and with minimal losses.

The need to remove pits from cherries

Those who are on own experience I have dealt with the removal of bones and know very well how long and painstaking this task is.

At the same time, all the most popular cherry dishes turn out much tastier if you don’t have to spit out the pits.

Pies and dumplings with cherries, jelly and jam, the popular “Drunk Cherry” cake and other favorite recipes are impossible without preliminary work on preparing the berries.

If berries are frozen for the winter, then removing seeds before freezing can significantly reduce the volume of packaging with berries and save space in the freezer.

There is also a very popular opinion about the dangers of hydrocyanic acid, which is released from the seeds during their heat treatment. Despite the fact that the level possible danger not tall, no one should risk their health.

Thus, purchased or brought from own garden Cherries must be prepared for further use and pitted.

How to remove pits from cherries at home using improvised means

First of all, it is necessary to make a reservation that, despite all the methods for removing seeds, this process remains lengthy and loss of juice cannot be avoided.

The simplest way is to cut the berry and remove the seed through the cut site. This method leads to a significant leakage of juice and the shape of the berry is disrupted, i.e. The attractiveness of the prepared dishes is significantly lost.

All other methods involve squeezing the seed out of the berry.

Absolutely manual method, i.e. without the use of auxiliary objects, this is pushing out the seed with your thumbnail, holding the berry with three fingers. This can only be done by those who are not too concerned about the fact that their hands will be stained brown for a long time and considerable effort will be required to clean the skin.

The most popular item used in cherry processing is the safety pin. It is held with a loop towards the berry, the cherry is placed on a pin with the side where the stalk was attached, the seed is picked up and the working tool is pulled out. With proper skill, the hole in the cherry is small and only on one side, the berry retains its appearance and the juice does not flow out too actively. Even housewives experienced in this regard should work on dishes with high sides so that splashes do not scatter throughout the room. The safety pin can easily be replaced with a hairpin of approximately the same size.

Another method is possible, in which the hole is made on both sides of the cherry. In this case, use a cocktail straw. It is easy to pierce the berry and push out the seed from the opposite side. In order to squeeze out a bone from the first puncture, some training will be required.

There is a known method that uses eyebrow tweezers, which are used like tweezers to pierce the skin and grab the bone.

Automated methods for removing pits from cherries

If cherries are one of your favorite fruits and pitting work has to be done annually and in large volumes, then it is worth purchasing a mechanical pitter, a berry “ripper” or a pitting remover.

The most popular models consist of a bowl in which the berry is placed, a lever, when pressed on the berry, the seed is squeezed out.

IN various models the bowl can take the form of a small depression into which the berry must be carefully planted.

The smaller the device, the lower its performance and the greater the loss of time and cherry juice. This device also does not prevent hands from getting dirty. Disadvantages also include damage to the berry and puncture on both sides.

More advanced machines for extracting pits from cherries are designed so that a significant amount of berries can be placed in the bowl at the same time. The design provides that the stone remains in a special compartment of the machine, and the berries roll down the groove into the placed dish. This is the most productive and relatively clean way to process cherries.

The rather high price and one-time need throughout the year reduce the popularity of mechanical devices and leave primacy to inexpensive and traditional manual methods.

Good luck removing pits from cherries at home!

If you have at least once in your life been able to harvest cherries for future use or use the berries for making desserts and pies, then the question has probably arisen about how to easily pit cherries so that save effort, time and get the desired result. After all, you want the berry to lose less juice and not become too deformed.

Why do you remove pits from cherries?

Cherry pits are removed for various reasons. Firstly, in order to fully enjoy delicious pie or cherry jam. Just imagine how inconvenient and unesthetic it would be if we began to take out the bones while eating (spitting them out or removing them with our hands).

Secondly, the drupe of the berry contains very harmful hydrocyanic acid, which is poisonous. Toxic substances can cause food poisoning if ingested in sufficient quantities.

Third, compote or jam made from peeled cherries is stored longer. The longer the storage period, the more toxins will be released from the drupe. Sealing with a stone can be stored for no more than a year, without it - two to three years.

On a note

If your baby accidentally swallows a couple of cherry pits, you don’t have to worry about poisoning. Amygdalin, contained in the nucleolus, is not transformed into hydrocyanic acid so quickly; this requires a certain time, so the bones will leave the intestines naturally earlier. In addition, only a large number of seeds can cause a poisoning reaction.

Methods for pitting cherries

To achieve the goal, all means are good, both improvised and special devices, machines offered by various manufacturers. Let's list the most popular ones.

Most housewives will probably agree with us that pitting cherries is a quite a painstaking and unpleasant process. However, using various simple devices and mechanical devices, it is possible to minimize both temporary losses and associated difficulties.

A missed pit during processing can result in a broken tooth for the eater of delicious cherry delicacies.

The choice is yours which device is better to give preference to.

Craftsmen have learned to independently make mechanical devices for removing pits from cherries. They work on the principle of a ballpoint pen with a spring. To make the device, you need to take a rigid metal (or plastic) tube with a diameter of 22 mm and a length of approximately 7 cm. It is desirable that the metal does not oxidize, so try to find aluminum tube or stainless steel. The tube should have a hole for placing the berries, 10 mm in diameter, as well as a pusher (for example, a nail) with a good spring that can push well and rise into top position. When you press the pusher spring, the bone is removed and the spring returns to its original position.

The devices listed above can also be used for cleaning cherries.

Useful video

Here is another fun DIY mechanism for extracting seeds. Look, everyone can do this.

Good afternoon friends! Cherry time is not only a treat for delicious berries, but also the hassle associated with processing the harvest. Many questions arise: what to do, how to prepare it. And among them, how to make jam and compotes - with or without a pit. And then, as a consequence, how to remove this very pit from a cherry at home.

This rather troublesome task sometimes forces us to abandon the intended recipe - well, I don’t want to bother! So how can you get rid of your boredom faster? Agree, spitting bones in the family circle is a nice thing. But imagine that guests are doing this together... And even if there are a lot of them...

There is another argument in favor of getting rid of the cherry center. They contain a substance considered toxic to humans. Therefore, jam or compote cannot be stored for long periods of time.

So we sit, picking out bones, cursing everything in the world. We also involve other family members.

How to remove cherry pits

There are several ways to extract berries from the seed at home: manually and with various special devices. By the way, these devices are sometimes not entirely serious. For example, ordinary women's stilettos or a cocktail straw. But, everything is in order...

Manual pitting

The simplest and easiest way to extract cherry kernels is with your hands, literally.

As they say, watch your hands:

• Pinch the berry with three fingers of one hand, and with the finger of the other, pick up the seed where the stalk is attached. Press slightly with your fingers and push it out of the cherry - the seed will fly out into your palm.

With some skill, the process goes quickly and cheerfully, especially if you involve someone from the household in it. Just be prepared for the fact that the entire surrounding area, including you, will be splashed with cherry juice. Therefore, equip yourself accordingly to protect yourself at least a little, since cherry juice does not wash off well (read how to remove it, including berry juice, here).

But, in my opinion, it is easier and faster to remove cherry pits at home using some available means. The only requirement for them is that there must be a loop at the end. And this is the answer to ordinary women's stilettos or safety pins.

How to remove the core with a pin or hairpin:

• Take the berry with one hand, and with the other, insert a hairpin or pin into the middle of the berry, in the place where the stalk is attached. Pick up the seed and pull it out in a circular motion.

Other folk remedies for removing seeds

What resourceful craftsmen can do! We used eyebrow tweezers, cocktail straws, a paring knife, and a garlic press. Let us understand the procedure; removing the cherry pit with their help will not be difficult.

Attention! With the help of all these simple devices you can simply and easily remove the pits from the cherries.

1. Paring knife. It is adapted for removing potato eyes, and we will use this opportunity for our own purposes. True, this method there is a drawback: the integrity of the berry will be compromised, but it is great for making jam or filling for baked goods.
2. Cocktail tube. Press the tube where the twig is attached and pierce the cherry right through. An ordinary match works on the same principle. The disadvantage of this method is that juice splashes in all directions and some of the pulp is lost.
3. Eyebrow tweezers. I don’t know, I haven’t tried it, but they say that you need to insert them into the berry like a hairpin and turn the core out in a circular motion.

But... all self-respecting housewives who make blanks in large quantities, I think, have long ago purchased special devices for a more civilized cherry pit extraction at home.

Mechanical cherry pit separator

There are several devices for easily removing the core of berries, one of them is somewhat reminiscent of a garlic press. It consists of a lever and a chute for berries, in which there is a special hole from which the seed will fly out. You need to get used to working with the device, since you will have to insert the cherry with “surgical” precision.

How to delete:

• Place the berry in the groove, but so that the place where the stalk is attached is on the hole in the groove, and press with the lever - the seed will easily fly out.

The process is much faster than when removing with homemade devices. But there are also some disadvantages: the cherry tingles right through and its integrity is compromised. And this leads to a large loss of juice and pulp. By the way, you will get no less dirty than with all other options.

Automatic cherry pitting machine

If cherries are your favorite berry and preparations in your home are becoming significant, you should think about purchasing a special home automatic pitting machine.

It is easy to use and sets a decent pace. The device is made from food-grade plastic. It has a tray for pouring berries and a fairly large container for collecting the extracted seeds. In addition, having a rubberized base, the machine is firmly installed on the countertop. By the way, the cost of the device is not scary; I bought it several years ago for 400 rubles.

How to remove cherry pits:

1. Place a portion of berries in the tray. Press the squeezer and the cherry, freed from seeds, will roll down the groove into the container. And the bones will fall into another one located inside the device.

An automatic machine has many advantages:

• Very fast and simple.
• Clean hands and clothes.
• Juice losses are insignificant.

Unfortunately, the machine is not ideal, and there are some disadvantages in its operation:

• The berries lose their integrity - they are pierced through.
• The machine does not always work well, and some of the berries have to be transferred manually.
• The seed is not removed from some parts of the cherry and the process will have to be repeated.
• Sometimes silicone gaskets come off, and without them the machine does not work.

But progress does not stand still, now other models have appeared, take a closer look at them.

All methods for removing cherry pits at home are good in their own way. Choose, and let the extraction process go easily and quickly, and let your winter preparations please you from the bottom of your heart. With love... Galina Nekrasova.

Still don’t understand why you did this?

Now we'll tell you.
In fact, this long and monotonous process has an unimaginably deep and serious meaning, no matter how ridiculous the procedure itself may seem to you.

The seed of a cherry or cherry contains the so-called glycoside amygdalin - this is a very dangerous toxic substance. The product of its release is cyanoacetic acid, an excess of which can lead to unpleasant and sometimes sad results.

You cannot be poisoned by amygdalin when eating fresh cherries, with the exception of eating the berry along with its pit.

When canned cherries are stored for more than a year, the cyanoacetic acid formed in its seeds begins to be released, which can easily cause serious poisoning.

However, if you plan to store cherry compote or jam from this berry less than a year, then it is not necessary to remove the seeds.

➤ New: The most effective way if it has long died out. Unique when they are so needed.

Delete manually

In order to get pits from cherries, housewives need everything: from improvised means in the form of standard hairpins to professional household units. Most often, the usual “old-fashioned” method is used - peeling the berries with your own hands, and in the most non-figurative sense.

So how to remove pits from cherries at home? The technology is simple: we hold the cherry between the middle, index and thumb, then use your thumbnail to pry up the seed in the place where the stalk is attached, and push the seed out.

This method is effective because with special dexterity the process is fun and fast: the bone itself flies out into the palm of your hand.
However, there is also a negative nuance in this technique: after such a cherry execution, it will be difficult to get rid of the burgundy berry “blood” on your hands. Although, they say that laundry soap, a brush and regular baking soda help to quickly get rid of cherry or sweet cherry juice.

If you are too lazy to tinker with cherry seeds in this way, you can use improvised means for this task.

The only condition: this item must have a loop at the end.

➤ Secrets: Useful advice to make you just a king among girls. We found out for you and your husband and put together a universal list.

Safety pins and regular hairpins can easily remove the pit from a cherry. We bring the cherry into their loop (at the place where the stalk is attached), grab the seed and separate it from the pulp.

Craftsmen have gotten used to using an ordinary cocktail straw to squeeze out the pits from cherries. With its help, they simply punch the berry in the center, while the seed pops out on the other side of the tube.

You have to adapt and learn how to remove the seeds from cherries, the video will help you with this.

“Automatic machines” will help you!

As you already understood, manually removing pits from cherries using improvised means is a rather “bloody-letting” process.

Therefore, most often, lovers of delicious canned berries use special automatic devices.

Cherry pit remover

We place each cherry separately in the “groove” of the device and lower the lever. At the same time, the bone is rapidly pushed out.

• The removal process is faster than, for example, with a pin “removal”;
• There is no need to “catch” the seed - it is definitely eliminated.

• The cherry should be placed in the separator, as they say, with surgical precision;
• The berry is pierced through, which worsens its final shape;
• Large losses of liquid and tender pulp;
• Soiled hands.

➤ This is cool: Everything about that very quickly and without pain that hurt you. Universal method when he left for another.

Cherry pitting machine

This device is ideal for those people who dream of dealing with a large volume of cherry seeds while maintaining a decent pace of work. Such mechanical devices are simply irreplaceable if you need to process a significant amount of berries.

The cost of such a find is, on average, about 400 - 500 rubles, which is inexpensive if, first of all, you look at its invaluable help in preparing all kinds of delicacies!

The cherries are placed in a large batch, and the ready-made berries go down the chute, jumping into a placed plate. The bones are stored inside the device.

• Clean hands;
• The loss of valuable juice is insignificant;
• Maximum processed cherries - minimum time.

Cherry is one of the most unpretentious berries. Everyone has been familiar with the taste of jam and refreshing compote since childhood. Everyone remembers how they helped their grandmother or mother remove seeds from berries. This long and tedious procedure plays an important role, since the stone contains a toxic substance, the excess of which can cause health problems.

The harmful product begins to be released from the seed after a year of preservation. Thus, if the seeds are not removed, the compote or jam should not be stored for a long time.

How to manually remove pits

To remove seeds from cherries, both improvised means and specialized devices are used. But most often the old method of manual cleansing is used. The technology is simple: the berry is pinched with the thumb, index and middle fingers. After this, use your thumbnail to pry up the bone. It is necessary to push out the seed at the point where the stalk attaches. This requires some skill; after a few attempts, the bones will quickly fly out.

In addition, when peeling cherries manually, you can apply next way. You need to slightly tear the berry at the base, and get close to the seed with your finger, removing it.

Removing seeds manually has the disadvantage that it is difficult to wash your hands. The burgundy berry bloom is absorbed deep into the skin. To get rid of traces of cherries, you can use baking soda, a brush and laundry soap.

Many housewives use a safety pin or hairpin to clean berries. To do this, insert the cherry into the loop of the pin from the side where the stalk is attached, pick up the seed and separate it from the soft part. If you don’t have a hairpin at hand, you can use a regular one. paper clip, and act on the same principle.

You can also use matches. To do this, you need to stick two matches into the cherry, squeeze it tightly on both sides of the pit and pull it out, picking it up.

There is a technology that uses a cocktail straw. The berry should be punched from the center so that the seed appears on the opposite side of the tube. This method requires some skill.

How to quickly remove seeds

To clean cherries when preparing dumplings, you can slowly test listed methods, but if you need to extract a large number of seeds, then it is recommended to familiarize yourself with faster options.

An excellent way to quickly remove pits is to use scissor-shaped eyebrow tweezers. To do this, you need to grab the bone and pull it up, twisting it a little. After practicing, you can a short time clear required quantity berries

It is easy to remove the pits by pressing down on the cherry with a large and index fingers. At the same time, you should not pinch the place where the stalk attaches, because the seed should jump out from there. The downside of the process is that splashes may fly away, so it is recommended to wear an apron and cover the table with oilcloth.

In addition, the seeds are removed using wooden sticks or knitting needles. To do this, you need to press on the berry where the stalk joins, and the seed will pop out from the opposite side. In this case, a large loss of juice also occurs.

Each housewife determines a method that is convenient for her and adapts, since canning requires quite a lot of cherries. Some options will help you quickly peel ripe or small fruits, while others will allow you to remove the pits from medium-sized cherries.

Devices for removing cherry pits

For high-quality cleaning of berries, you can purchase a special machine for removing pits from cherries. The device is designed to make the monotonous process easier. This device is able to cope with a large volume of berries in a short time. Similar mechanical device will become a great assistant when you need to peel a lot of cherries.

The operating principle of the machine is that the cherry is placed in large quantities, is cleaned, and the finished berries go down the chute, falling into the placed container. And the bones are collected inside the device.

TO positive characteristics include the fact that the hands remain clean, the loss of juice is completely insignificant, a large volume of cherries is cleared in a short time. The downside is that the berries often need to be transferred manually by opening the machine. In addition, the cherry is pierced through. Some silicone elements of the device jump off from time to time, stopping operation. Sometimes processed berries may remain unpeeled.

An equally well-known device is the seed remover. The berry is placed in the groove, after which the lever should be lowered and the seed is pushed out. This process is much faster than manual. Negative indicators: each cherry must be placed with special precision in the separator; hands get dirty when working, and juice is lost.

A pitter, or cherry peeler, is a useful kitchen gadget that allows the housewife to quickly remove pits from cherries and prepare large quantities of berries for processing.

The pulp separated using a machine can later be added to baked goods, canned or jam, dried, or frozen. The device is suitable not only for cherries, but also for sweet cherries, olives, and cherry plums.

Design and principle of operation

The predecessors of pitting machines were simple tools that looked like a corkscrew or a garlic press. Modern devices They are more complicated, but working with them is easier and more comfortable. They are made of safe food-grade plastic, lightweight and compact, and work without a network connection.

A cherry peeler is a hermetically sealed container consisting of a lid and a container for seeds. Top part The device has a hole where the cherries are thrown, and a small tray in the form of a trench along which the berry (already pitted) rolls down. The bone is pushed out by a piston with a metal tip and a spring.

It is important to know: To prevent the device from sliding on the table during operation, it must be equipped with special suction cups.

How to use the machine

The cherry peeler is so safe and easy to use that even a child can remove the pits with it.

To do this you need:

1. Wash the cherries thoroughly and separate them from the stalks (if the cherries are frozen, defrost them first).
2. Assemble and install the machine on the table, secure the piston.
3. Place a bowl for peeled cherries under the appliance tray.
4. Pour some berries into the recess on the lid.
5. When the cherry is in the hole area, push the piston with a push.

After all the berries have been processed, the remover must be disassembled, pitted, washed and dried.

Best Pit Separators

Today, the most popular cherry peelers include:

• model Handy 643630 from Tescoma (Czech Republic) - a device for working with cherries. It is characterized by its low weight (only 580 g), compactness and high price;
• Model Cherrymat 37200 from the German company Lifeheit is a device that allows you to remove seeds from 12 kg of fresh, frozen or canned berries in an hour. When assembled, its height (excluding the piston) is 15 cm. Average price category;
• model KN-1260 from Kaiserhoff (Germany) is an inexpensive, practical machine, produced in red and blue color. It has a lining for reliable fixation on the surface, a spare silicone insert for separating the seeds.

Thus, optimal combination German-made devices differ in price and quality.

Good to know: household pitting machines are not suitable for processing cherries into industrial scale(70–90 kg per hour). There are professional electrical devices for this: they are usually metal, large, and powerful.

Pros and cons of machine pitting

The main advantage of working with an extruder closed type– hands and surrounding objects get less dirty.

Removing the pit with such a device allows you to reduce juice loss (especially in such juicy cherry varieties as). On the other hand, cherry peeling, like any other technique, is imperfect.

After her they remain through holes, which noticeably spoils appearance cherries

But the main thing is that you can’t remove the seeds from all the berries this way.

Advice to housewives: Immediately before using cherries, check the already processed berries for the presence of seeds and, if any, remove them manually.

How else can you remove the pits from cherries, see this video:

Summer is the best time of the year, because with the arrival of the summer season, we can enjoy delicious and sweet cherries and make preparations for the winter. Of course, for those who don’t have their own dacha, cherries can be purchased at the market, because in the summer they are much cheaper and healthier.

If you are one of those who are tired of getting your hands dirty and poring over every cherry to get the pit, then this is the place for you. We present to your attention three simple ways, how to quickly remove the pit from a cherry, and hardly get your hands dirty.

In truth, today there are special devices that can easily remove hard seeds from any berry. However, why spend a lot of money on something that you can do for free with your own hands and without any effort? special effort? Therefore, be sure to use today’s tips and you will forget about this problem forever.

Method number 1: “Bottle”

This method is the fastest and easiest, with the least amount of dirt on your hands. This is what we recommend using. For this you will need: several cocktail straws or Chinese chopsticks, and a bottle of wine or cola. And then, everything is very simple.

You need to place a berry on the neck of the bottle and pierce it all the way through the middle with a stick. This way, the seed falls straight into the bottle, and the berry and your hands remain clean. You can see how easy it is to do this below.

Method number 2: Tweezers

Pull out the bone using tweezers. It's quite simple. The advantage of this method is that the berry remains completely intact.

Method number 3: Paperclip

If you don’t have tweezers, you can use a regular paper clip, or even a hairpin will do. To remove the bone, you need to use it like a spoon. This method is certainly effective, but it can get your hands a little dirty.

Cherry is very tasty and healthy berry. Housewives usually enjoy making all kinds of desserts from it or using it as a filling for baking pies. But it's not that simple. The fact is that inside each berry there is a small seed. Therefore, before starting work, it has to be removed. Here the question immediately arises: how to remove pits from cherries? This problem can be dealt with in different ways. As an example, it is worth considering several interesting options.

The simplest ways

Before you figure out how to remove pits from cherries, you need to know that there are three main ways to do this:

1. Cutting (using a knife).
2. Pulling out using improvised means.
3. Pushing out (using various mechanical devices).

Each of them is good in its own way and ultimately leads to the desired result. The difference is only in efficiency and speed of work. To begin with, you can consider the first method. This is the easiest way to remove pits from cherries. To work you will need:

• cutting board;
• sharp knife;
• fresh fruits.

Algorithm of actions

Everything is done quite simply:

1. First you need to sort out the berries. Rotten and damaged ones should be thrown away.
2. Then the cherries need to be washed. For this it is better to use running water. Moreover, its temperature should be slightly higher than room temperature.
3. Find a special “mark” on each berry. It refers to a small depression at the place where the stalk is attached.
4. Place the berries on cutting board so that the mark is on top.
5. Use a knife to make an incision so that the blade touches the bone.
6. Next you need to be extremely careful. Using light pressure, lower the knife down so that its blade literally “rolls” along the edge of the bone.
7. Roll the remaining pulp halves in your hands. The bone should fall out on its own.

This method requires some skill. Many housewives never manage to master it.

Pull method

Of course, you can cook cherries whole. But in most cases, housewives still decide on the need for special preliminary preparation fruits To do this, you can, for example, learn in advance an original method of how to remove pits from cherries using the most common means at hand: pins, paper clips or hairpins.

The technology of this process is quite simple:

1. The fruits must be washed and carefully sorted. Then take one berry in your hand.
2. Insert any of the selected devices into the place where the stalk is attached so that its bend (loop) goes inside. In the case of a paper clip, you must first straighten it. If necessary, you can use either side depending on the size of the bone. There is no need to carry out any additional procedures with the pin.
3. Pull out the bone, hooking it from below.

The disadvantage of this method is that during operation the berries lose a lot of precious juice.

Push method

Considering the disadvantage of the previous method, experienced housewives advise using another option. With their advice, you can learn how to remove pits from cherries at home with minimal losses. In this case, you will need the following tools: a bottle (beer or cognac) with a narrow neck, a stick of medium diameter.

The process of extracting a bone consists of three stages:

1. Place a clean bottle on the table.
2. Place the berry on the neck so that the place where the petiole was located is on top. Here we must take into account that the diameter of the cherry should be larger.
3. Use a stick to pierce the fruit through. In this case, the pulp will remain on the neck, and the bone will fall to the bottom of the bottle. The optimal diameter for a stick is 4-5 millimeters. In this case, it all depends on the size of the berry. A sushi stick or cocktail straw is ideal for this procedure.

This method is good because workplace remains practically clean. But even here you need a certain skill and practical experience.

Using Tools

Over time, people came up with various mechanical devices. They make the process of preparing berries a little easier. This is especially important when large quantities of fruit need to be processed. Moreover, you can do this both at home and in the country. Special conditions is not required for this procedure. Now we need to take a closer look at how to remove pits from cherries at home or in similar conditions. Similar devices also operate using the extrusion method. The device itself comes in three types:

1. It looks like scissors or forceps. The person is only required to squeeze the handles, bringing the two ends together.
2. Sometimes the device resembles a syringe. The bone is removed by pressing on one of its parts.
3. Some devices are similar in design to a stapler. It all comes down to squeezing its two parts together.

The latter type of device is found quite often. On one side it has a cell in which the berry should be placed, and on the other there is a pin with a cross-section at the end.

To remove seeds using such a device, you must perform the following steps:

1. Place the cherry in a special recess. It is advisable that the place where the petiole was located on top.
2. Squeeze both handles. In this case, the pin will pierce the berry right through, and the seed will be outside.

Many people believe that this is the best option for home use.

For large volumes

If there are a lot of berries, then the procedure for extracting seeds from them will require large quantity time. The process may take hours. How to quickly remove seeds from cherries, because the processed berries will gradually begin to dry out and lose their appearance? For such a case, the new semi-mechanical device Cherry Remove, created by Chinese specialists, is suitable. It also operates on the principle of a stapler. True, here the device already consists of three parts:

• top cover with rods;
• lower container for collecting seeds;
• intermediate shape with round holes.

It is easy to work with such a device:

1. The berries must first be washed.
2. Place them in the holes of the mold. There are only six of them.
3. Press the lid with your hand. In this case, the rods, which have jagged tips, will easily pierce each fruit. And the bones that collect in the lower container can be thrown away periodically.

With such a device, work will go much faster. Having such a “press”, you don’t have to be afraid of a big harvest.

The secret of cleanliness

The Leifheit mechanical device, developed by German designers, can make the housewife’s job of removing seeds as easy as possible. It is very easy to handle and exemplifies how easy it is to pit cherries. Moreover, using such a device you can process not only fresh, but also canned and frozen fruits. The device consists of several parts:

• compartment for seeds;
• shaped lid with a built-in lever.

It is very convenient to work on such a device:

1. Place the washed berries into the receiving tray on the lid. In this case, one of them will immediately appear in a special hole.
2. Press the lever. The rod located inside it pierces the cherry through. The stone will fall into the compartment located below, and the cherry will flow out through the tray. To collect the processed fruits, place a free container (bowl or plate) nearby.

Each time the lever, using a special spring mechanism, returns to its original position and is ready for use. At the same time, a new berry enters the hole. Everything happens by itself. And the housewife can only periodically add fruit to the receiving tray. With such a device, you can practically avoid unwanted splashes of juice. This is his secret of purity.