How to whitewash ceiling tiles. The best way to paint foam ceiling tiles
Finishing the ceiling with foam panels is inexpensive and quick to implement. Owners often choose light-colored material, but during use it loses its original appearance - it becomes red or grayish. The question arises of how to tidy up the ceiling: replace, whitewash or paint ceiling tiles. In this article we will take a closer look at the last two methods.
Is it possible to paint foam ceiling tiles?
Foam panels can be whitewashed and painted. There are special tile models that are designed for painting.
Coating with a suitable coloring composition is done in order to:
- refresh and restore the attractive appearance of foam tiles;
- protect the ceiling from moisture;
- make the panels stronger and more durable;
- update interior design.
It is important to choose the right paint so that it matches the composition and does not spoil the porous material.
What paints are suitable for polystyrene foam?
Foam finishing is destroyed by varnishes, alkyd enamels, compositions based on alcohol, lower hydrocarbons, as well as oil and nitro paints. Acetone, acetic acid and some painting oils deform the surface of the material, so use paint that does not contain these substances.
To safely paint foam ceiling tiles, you should stick to acrylic and latex products. Water-based paint is also suitable.
Before applying any coloring composition to the entire surface, first check on a small piece of tile.
Acrylic
Advantages of coating with acrylic paint:
- Resistant to high and low temperatures, high humidity.
- Preserving the integrity of the coating and color for a long time.
- It is odorless and does not contain allergens or toxic substances.
After treatment, the surface dries quickly.
They use paint from manufacturers who produce quality products:
- Caparol, Russia;
- Sniezka, Poland;
- Sadolin, Finland;
- Dulux, Netherlands;
- Kolorit, Ukraine;
- Joker, Russia;
- Belinka, Slovenia;
- Farber KABE, Switzerland;
- Tex, Russia.
Approximate consumption of acrylic paint for porous and textured surfaces– 200-250 g/m2.
Water-based
Aqueous emulsion is an aqueous dispersion of pigments and polymers. It is cheaper than acrylic products, but is well suited for whitewashing a bedroom, living room or hall. This coating is not used in rooms where the ceiling is often dirty and subject to high humidity; it is not recommended to wash it.
Advantages of water-dispersion paint:
- Low price.
- Getting uniform matte finish with well-disguised seams between panels.
- The color scheme consists of soft and pastel tones.
If desired, the ceiling in the bathroom is covered with water-based emulsion, but not white; the color quickly becomes dirty gray and needs to be lightened. The surface is prone to the formation of fungus. In the kitchen, such a coating will have to be renewed after washing.
Designers choose water-based paint from Russian brands– Admiral and Eurolux. Quality products are offered by the Finnish company Tikkurila, as well as German and Polish manufacturers.
Approximate consumption of water-based products:
- for the first layer - 1 liter per 4-5 m2;
- for the second and subsequent ones (if necessary) - 1 liter per 7-10 m 2.
Latex
Latex-based products create both glossy and matte surfaces. The coating is moisture resistant, the paint is easy to apply due to the elasticity of the components and does not fade in the sun. When applying, follow the layer thickness recommended by the manufacturer. Only a thin coating will be durable. Latex paint dries quickly. But there is one drawback - with high humidity, fungus can form. Therefore, latex is not suitable for bathrooms.
Popular brands: Cerezit, Prestige, Ultra, Olimp, Renoton, Polirem, Parade. Product consumption different manufacturers varies - one 1 liter package can paint from 6 to 14 m2 in two layers.
Dyeing technology
Before painting you need to prepare necessary tools and clean the surface and apply primer.
Before all work is done, furniture is removed from the room. What cannot be taken out is covered. The floor and other surfaces are covered plastic film. Places that can be accidentally painted along with foam plastic (the junction of the wall and ceiling or baseboard) are sealed with masking tape.
What you need for painting
List of tools and materials that will be required for work:
- dye;
- primer;
- sealant or putty;
- paint brush, sponge, rubber spatula, roller or spray (depending on the chosen painting method);
- trestles or stepladder;
- container for paint;
- workwear;
- vacuum cleaner, dry brush and detergent for surface preparation.
Surface preparation
Before painting, the ceiling is cleaned of contaminants (grease deposits, dust), since the paint will not adhere to them. First use a vacuum cleaner. Then, with a dry brush, remove the dust that has accumulated in the unevenness of the relief pattern, since the panels rarely have a smooth surface. After mechanical cleaning do wet cleaning. To do this, apply soap solution using a brush, then wipe dry with a clean napkin or cloth.
If you plan to paint new panels that have just been glued, then you need to fill the seams with sealant. The cracked joints between old tiles are covered with putty to obtain a seamless surface. Use only rubber spatulas so as not to accidentally damage the integrity of the polystyrene foam.
Padding
Prime the ceiling 11-12 hours before painting. The leveling compound is applied with a roller or brush; one layer is sufficient.
Painting work
Painting ceiling tiles at home is possible using a spray gun, brush or roller.
During work, arrange lighting from both sides to avoid uneven coloring and streaks.
First, use a brush to paint over joints, corrugated surfaces and hard to reach places. To simplify further work, you can use a roller.
For getting matte ceiling with glossy relief the surface is painted acrylic agent, then varnish is applied to the protruding parts. This way you can do original design with your own hands.
The aerosol method of application is best used on final stage, so the color and surface structure will be perfect.
The option of applying paint to the slabs before gluing is not very successful. After installation on the ceiling, you will still need to seal the seams and repaint the surface.
Which tiles should not be painted?
There are types of foam panels that cannot be painted. This is a laminated ceiling tile that is covered protective film. The model is not intended for any processing; it is impossible to achieve a uniform color without streaks.
- Giving the design a finished look.
- Increased service life. Polystyrene quickly attracts dust and takes on an unaesthetic appearance. The coating may turn yellow, in which case it will need to be bleached. Will go for restoration Extra time and funds.
- A layer of paint will protect the ceiling from moisture and mechanical damage.
The painted surface will look perfect if drafts are excluded while the layers are drying. Heaters and fan heaters are not used for drying; in addition, windows are curtained to prevent direct sunlight.
Original ideas for painting ceiling tiles
The ceiling can be made plain or painted in different colors, individual parts may shine or be of a more saturated shade. The selection of photographs includes interesting ideas decorating foam ceiling tiles using painting.
Thus, painting is used not only to protect the surface, but also to create original decor using painting and other design techniques.
The overall style of the interior is largely determined by appearance ceiling Even a cursory glance is enough to identify high-quality work, where the combination with other elements of the interior forms an integral structure, when the ceiling is an inseparable part general design. We will tell you how to paint ceiling tiles in a detailed guide.
It doesn’t matter whether your ceiling is covered with tiles or the tiles have lost their unpresentable appearance, turned yellow and dusty - do not rush to dismantle them. Pick up suitable paint and return the tiles not only to their former beauty, but also update the design of the room.
Preparatory work
Let's consider a situation where you don't have ceiling tiles yet. This is a beautiful stylistic solution for any house or apartment, since the ratio of cost and variety of slabs will pleasantly surprise any buyer. Expanded polystyrene (foam) tiles are popular for their decorative properties and durability.
But don’t think that price and variety are the only properties of such tiles! The buyer’s imagination on how to beautifully glue such tiles can be an excellent solution in choosing a design. Its functional characteristics:
- Excellent washability. The tile will withstand any wet cleaning and dust removal with a vacuum cleaner;
- This is a very durable material. Average term service up to 10 years;
- Quality and high environmental friendliness;
- Depending on your priorities, you can choose any color scheme or choose a design where the paint will go.
Why are only polystyrene foam ceiling tiles suitable for painting? Painting tiles should be done wisely. There is no need to explain that there are materials that should not be painted: plastic and laminate. If you decide to take such a desperate step, keep in mind that painting can even damage such tiles, leave streaks and lie poorly.
As a result of unsuccessful painting, you spend money on complete or partial replacement of ceiling tile elements. Do you want this? Hardly! If you need to paint ceiling tiles without damaging them and find out how painting works, we can help you practical advice below.
Paint and choice
How to paint ceiling tiles: what paints to use? Ceiling tiles are usually painted with two types of paints - acrylic and water-based. It is not advisable to use other paints and varnishes, since both types of paint have good performance, fast drying and durability.
Acrylic and water-based paints are presented in a very wide range of manufacturers and ranges in construction stores, so choosing the optimal paint will be easy. How to paint tiles, what characteristics do paints have? The following positions are distinguished:
- Durability
- Good density;
- Moderate degree of gloss;
- Moisture resistance and the ability to not dissolve in water;
- Resistance to microorganisms;
- Resistant to washing and wet cleaning.
Acrylic paint
Acrylic paint is not without reason the most popular due to its many advantages. It is reliable, has bright shades, fits well and dries quickly. Please note some specific details:
- Rich colors will add newness to any room;
- Ease of application will make even the most complex repairs fast;
- Good resistance to a variety of adverse conditions;
- High environmental friendliness and safety for humans;
- Excellent elasticity without streaks or bulges;
- Vapor permeability (especially useful property in the kitchen);
- No odors upon application.
Painting with acrylic paint creates a dense and uniform layer on the ceiling surface, does not accumulate dust, resists moisture and is resistant to any temperature conditions.
Please pay attention! When choosing acrylic paint, keep in mind that you will have to pay a lot, and the paint tends to wear off after its service life.
Is it possible to paint ceiling tiles with other types of paints other than acrylic? Can! Let's talk about water-based paint.
Water-based paint
You can rest assured high quality paints based on water emulsion: it has good working properties on a par with acrylic paint and is distinguished by a rich assortment of shades. Let's look at the main advantages:
- Availability and low cost, unlike acrylic;
- High level vapor tightness;
- Absolutely harmless to humans and environmentally friendly composition;
- Easy to use and odorless.
Pay attention to the weak stability of the water-based emulsion in front of water, as a result of which it becomes less stable and also tends to quickly absorb dirt.
When comparing two types of paints, you will inevitably face a dilemma - what paint can you use to paint foam tiles so that it is of high quality and not expensive? Painting itself - easy way quickly finish the repair (or start it!), so it’s better not to save money in this matter and choose paint using the best characteristics.
If you are not satisfied with both types of paint, you can resort to the enamel painting method or oil paint, just keep in mind that this method, although cheap, is hopelessly outdated and quite harmful.
Finishing work
To paint ceiling tiles carefully, before you start painting, you need to protect the floor and walls from paint drops; you don’t want to then scrub the stubborn emulsion off objects?
Take out all household items, and what is impractical to lift and move can be covered with newspapers, securing the edges with tape. You may not even notice drops of paint, especially if it light shade, so cover both the floor and the baseboard with any covering material.
Having put on work clothes, covering your head and protecting your eyes, you can begin finishing work:
- First of all, let's take putty, which we will use to seal the tile joints. For what? This method is well suited to ensure that the paint lays down in an even layer, and the ceiling looks almost like plaster;
- Let's prepare the paint. We have already written about her choice a little higher. To obtain the desired shade, you can mix colors and apply them to the ceiling tiles. To achieve roughness, you can even add a little sand, and thus create an uneven texture;
- Before painting, clean the tiles if they are laminated to prevent the paint from clumping;
- Gently dip the roller into the paint and start from any corner, being careful not to go to the edge of the walls;
- The resulting gaps should be carefully finished with a small brush so as not to stain the wallpaper.
It is important! Are you not satisfied with the putty? Buy an acrylic sealant, preferably one that is water soluble.
Also count required quantity paints in advance, so as not to bother with choosing the right shade later.
If you did everything correctly, there should be no unpainted or lightly colored areas on the ceiling, no stains, streaks or lumps. It is advisable to go over the paint 2-3 times to achieve a satisfactory result.
How can you paint foam tiles?, if it has a pattern, texture or design? It is clear that a roller will not help you in this matter, nor will a brush - the work will take a long time and there will be unpainted areas.
Painting ceiling tiles with a convex pattern is done with a special sprayer. You must work with it carefully, try not to get it on the walls, since the jet instantly settles on the surface and nothing can remove stains from the wallpaper. At the edge of the wall, paint the gaps by hand.
Is it still possible to paint ceiling tiles with some other types of paints? All markers have different tastes and colors. We have given an example of the most popular time-tested paints, but you can test the “fate” of the ceiling by purchasing some other product that you like. Good luck!
A ceiling finished with polystyrene foam tiles is affordable, convenient and creative. And it doesn’t matter what surface it has. To maintain the finish in its original condition, it is enough to paint the foam ceiling tiles with the correct composition.
Which tile is suitable for the ceiling
Expanded polystyrene ceiling finishes vary depending on the surface type of tile used. Three types of ceiling tiles are used, including conventional compact pressed blocks, injection and extruded.
The first option is distinguished by blurry geometric shapes. Defects in tiles become noticeable if several products are placed on edge. It is better to entrust installation using such tiles to professionals who can make the difference in size almost invisible.
Injection foam tiles- a polystyrene foam product obtained by sintering. Products have correct form, identical parameters, clear drawing. It is more pleasant and convenient to work with such tiles; in addition, they last longer than usual, which explains the consistently high demand for products.
The most expensive are extruded or “laminated” tiles. Products are obtained by pressing extruded strips painted in required colors expanded polystyrene.
The tiles are initially selected in the desired shade, with patterns, imitating various surfaces, including marble, wood or granite. That is why, in this case, painting ceiling tiles will not always be appropriate, and if work is carried out, it will require compliance with certain rules.
Why paint a foam ceiling?
Is it really necessary to paint the ceiling? foam boards ok, when in white it looks neat and well-groomed? In fact, it is possible and necessary to paint a surface with this type of finish, with the exception of some cases when it comes to tiles with a laminated surface. Although even such ceilings lose their shade saturation after a few years, requiring renovation.
Periodic and timely painting of ceiling tiles is necessary not only to improve decorative properties finishing. A correctly selected coloring composition will protect the surface of products from moisture and extend their service life.
No coloring foam ceiling gets dirty faster and cannot be cleaned. Traces of use will become especially noticeable on the ceiling tiles in the kitchen, where the surface of the products will, over time, absorb not only odors, but also traces of fat, soot, etc. Meanwhile, it is enough to simply whitewash the ceiling tiles in the kitchen, in the hall or in the corridor to to renew the surface and refresh the interior as a whole.
How to choose paint for ceiling decor
The right paint for ceiling tiles comes in three options:
- water-based;
- acrylic;
- latex.
The easiest and cheapest way to paint ceiling tiles water-based paint or acrylic compounds. Latex painting will cost more, but other paint options for polystyrene foam tiles are not considered in principle, as they can cause damage to the surface.
Water-based paint is a proven, practical option. After treatment with the composition, the ceiling dries quickly and lasts longer. When choosing paint you need to pay attention to the following points:
- density (the higher the indicator, the better);
- resistance to moisture (paint should not dissolve in liquid);
- durability;
- low gloss level;
- resistance to damage by microorganisms.
Regarding acrylic paint for painting polystyrene foam tiles, it is worth noting the main advantages and disadvantages of the composition. The paint is easy to apply, is available in a wide range of colors, can withstand aggressive environments and, what is important, is completely safe for humans. This means that you can paint the ceiling with acrylic compounds in bedrooms and children’s rooms without fear of a pungent odor (it simply won’t exist) or condensation (the composition has high vapor permeability).
Compared to water-based compositions, acrylic paint It is not only more resistant to moisture, but also does not absorb dirt as intensively.
The disadvantage of acrylic paint is its higher price compared to water-based paints, as well as not the longest service life.
Latex paint can be used to paint the ceiling when price is not a priority. Compositions of this type have a number of advantages, including high drying speed, long-lasting color saturation, and the ability to paint both dry and wet surfaces.
How to prepare the ceiling base for painting
Same as ceiling finishing liquid wallpaper, painting polystyrene foam tiles will require some preparation. Start by leveling the surface. To do this, the joints between the tiles are puttied or treated with special acrylic sealant.
Special attention is paid to the gaps between the ceiling tiles and the walls. They are also sealed with putty mixtures; the covering on the walls - wallpaper or tiles - is protected during the work with wide masking tape.
If these are washable ceiling tiles, then before painting they must be cleaned of traces of use, thus preventing stains from appearing after finishing. Difficult to remove stains are treated intensively in several layers with primer mixtures. For priming, compositions are suitable only for water based without chemicals that can damage the surface of the film. Apply the primer not with a roller, but with a wide, soft and fluffy brush.
Before painting, you can also combat dark spots on the ceiling using paint of the same color. Once the stains have dried, proceed to painting the rest of the ceiling surface.
The principle of painting ceiling tiles
When the question of how to paint the polystyrene foam ceiling and what color has been decided, the surface has been prepared, and the painting mixtures have been purchased, you can proceed to the process itself. To carry out the work you will need: two brushes - wide and thin, a roller and a sprayer, some use a sponge for painting.
The latter is an optional tool, more relevant for painting tiles with smooth surface without relief or pattern. Surfaces with complex shapes and images can be thoroughly painted only with the help of brushes, both wide and thin.
When asked whether it is possible to paint foam ceiling tiles in one layer, thus renewing the coating with minimal costs specialists answer negatively. Perfect option- painting not even in two, but in three layers. In this case, paint consumption is higher, but this is the only way to achieve a rich, deep color of the surface with a homogeneous and uniform structure.
Regarding the choice of color for the ceiling made of polystyrene foam tiles, you must follow simple rules. So, what color should you paint your kitchen ceiling? It is better if it is a color on which traces of soot and dirt will not be so noticeable over time. In the hall, nursery, bedrooms, the ceiling is painted taking into account the characteristics and color range interior, not forgetting the properties of colors to visually expand, narrow, and lengthen the room.
Painting ceiling tiles lets you inform the finish desired shade. In most cases the material of this type has a basic White color, which is very convenient for additional decoration.
Ceiling preparation
The popularity of ceiling tiles is explained by a number of advantages of this finishing material. For this cute stylistic decision characterized by the presence optimal ratio cost and decorative characteristics. The variety of slab designs allows you to choose the most best option for finishing various rooms. Low cost and variety are by no means the only strengths polystyrene foam tiles.
Among other advantages of this material for finishing the ceiling are the following:
- Washability. Excellent moisture-resistant characteristics allow the slabs to withstand any wet cleaning and cleaning the surface from dust using a vacuum cleaner.
- Long service life. The service life declared by the manufacturers is up to 10 years.
- Good quality. Despite the low cost, such finishing cannot be accused of being unpretentious or rustic.
- Wide selection of textures and patterns. The basic white color can be easily changed by painting the ceiling tiles with water-based paint.
Only polystyrene foam ceiling tiles can be painted. Plastic or laminated analogues do not have this advantage. Some users, due to inexperience, begin to paint plastic, which ultimately leads to damage to the finish. The same applies to laminated products: such experiments can lead to the replacement of the entire skin.
Selection of paint for ceiling tiles
Having received an affirmative answer to the question whether it is possible to paint foam ceiling tiles, they move on to choosing suitable remedy. There are only two options for what paint to paint the ceiling tiles with. We are talking about acrylic and water-based composition. Use others for these purposes paints and varnishes absolutely not recommended. Only the specified compositions have the most suitable performance characteristics, including quick drying and durability.
Acrylic and water-based paints have a fairly extensive range. This makes the task of choosing what to paint the ceiling tiles much easier. Materials of this type have the necessary strength, density, washability, water-repellent properties, resistance to mold and excellent decorative characteristics.
Acrylic paint
Acrylic compounds are excellent option when choosing what paint to paint foam ceiling tiles. The high popularity of materials in this line is explained by their reliability, bright colors, ability to hide the surface well and dry quickly.
Among the undoubted advantages of acrylic paints are the following:
- Saturation of shades. This makes it possible to radically change any room.
- Easy to apply. Painting is much faster than when using oil-based paints.
- High resistance to various aggressive influences.
- Absence of volatile substances harmful to humans.
- The elasticity of the material avoids the formation of streaks and bulges.
- Vapor permeability. This prevents the effect of blocking the room. A very useful property when used in the kitchen and bathroom.
- Completely absent bad smell while drying.
Acrylic paint for foam ceiling tiles forms a dense, uniform coating on the base. It is not prone to dust accumulation, resists moisture well and withstands temperature changes. When choosing an acrylic composition, you should take into account its high cost. When the service life is over, the decorative layer begins to wear off.
Water-based
It's about very quality paint how to paint ceiling tiles. Performance characteristics materials are at a very decent level, quite comparable with acrylic analogues. The range of shades here is also quite large.
Water-based compositions have a number of strengths:
- Cheapness. From a financial point of view, water-based emulsion is much more affordable than its acrylic counterpart.
- Excellent vapor tightness.
- High level of environmental safety, which allows painting in residential areas.
- Easy to use with no unpleasant odor.
Before whitewashing ceiling tiles with water-based paint, you need to take into account the low durability of this material in relation to moisture. In addition, the decorative layer quickly becomes dirty. Therefore, it is recommended to paint ceiling tiles with water-based paint in dry, clean rooms, such as a hallway or bedroom.
When choosing the type of paint for your home, first of all, take into account functional purpose premises and renovation budget. It's better to invest in quality material, which will last longer and will initially have better decorative properties. Also, when finishing the floor, it is important to use ceiling tiles that can be painted. As mentioned above, it is better not to use plastic or laminate products for this.
Painting rules
Before painting ceiling tiles with water-based paint, you must take all necessary measures to protect floors and walls. If this is not done, upon completion of the work you will have to spend a lot of time washing off the dried drops. It is recommended that the room where repairs are carried out be cleared of all items and furniture that can be removed. Objects that are too heavy are moved in one line to the center of the room and covered with thick film. When starting work, it is advisable to put on work clothes and a hat.
The technology for applying paint to ceiling tiles is as follows:
- Use putty to seal the joint areas between adjacent tiles. As a rule, after gluing there are small gaps left that the paint cannot cover. This will allow you to achieve a monolithic finish: after the paint dries, it will look like plaster. Instead of putty, it is allowed to use acrylic sealant.
- Preparation of paint composition. Before doing this, you need to carefully study the instructions on the plastic bucket. As a rule, the manufacturer recommends diluting the first layer a little with water (10-20%). In addition, to give the paint the required shade, the desired dye is introduced into its composition. To make the texture of the finish rough, add a little sand to the composition.
- All areas of the ceiling where putty was used must be carefully sanded with a paint brush. sandpaper № 120.
- The finished paint is poured into a special plastic block, where it is possible to roll out the roller. You can start painting the ceiling tiles with water-based paint from any corner, carefully dipping and rolling out the roller.
- For decorating areas along the walls near ceiling plinth It is more convenient to use a painting brush with soft bristles. The same goes for the grooves and patterns on the tile itself. Quite often you have to deal with a relief pattern that needs careful painting.
- Having painted the area that can be grabbed from the construction sawhorse, you need to get down to the floor and move the sawhorse to another corner. In this case, the distance should be enough to normally align the border in the middle. This area needs special attention, because This is where the influx most often remains.
- After the entire ceiling area has been painted, you need to walk around the room and carefully examine the surface of the tiles for gaps. All detected defects are removed with a small brush.
Good afternoon. I have foam tiles glued to the ceiling in my kitchen. I won’t say that it is dirty - there are no soot or grease stains. But general form became somewhat stale. There is neither money nor time for repairs, but the appearance of the ceiling is annoying. Tell me, is it possible to paint the ceiling tiles, and if so, what kind of paint? And which tool is better to use – a brush or a roller?
Valentina
Foam products are easy to paint
Hello, Valentina. Painting ceiling tiles is not only possible - it is recommended for rooms with high humidity and a high risk of contamination, which includes the kitchen. But this should be a paintable tile made of polystyrene foam or polystyrene without a laminated coating.
Paint selection
It is important! When choosing what to paint products with, compositions based on white spirit, acetone and other solvents will have to be excluded, as they corrode the foam.
So what kind of paint can you paint? ceiling surface? These should be water-based PVA-based compositions or aqueous acrylic dispersions.
- Acrylic paints contain polymer resins. They practically do not smell, do not fade, and dry quickly. After drying, they form a moisture-resistant but vapor-permeable film on the surface. Waterproof acrylic paint for tiles is not washed off with water; the surface can be washed with non-abrasive agents. Its only drawback is the high price, which, however, pays off for a long time operation and excellent appearance.
- Water-based compositions choose when painting ceiling tiles must be inexpensive. Like acrylic, they are odorless, dry quickly, can be easily tinted in different shades and have breathable properties. But they have more shortcomings. This is both low moisture resistance and instability to dirt: the painted surface absorbs fat, soot, and tobacco smoke.
When choosing what to paint your tiles with, focus on your budget and coating requirements. If you don't have enough money, water-based emulsion is a completely acceptable option.
You cannot wash a ceiling painted with it, but you can repaint it, as is usually done with ordinary plaster surfaces.
Dyeing technology
So, you have chosen the products - what to paint and what color? All that remains is to implement our plans. Do not rush to immediately take up the brush; first carefully inspect the surface.
Preparatory stage
Before painting ceiling tiles, you need to:
- Clean from dust and greasy deposits. To do this, use a vacuum cleaner and a sponge with a mild detergent;
- Glue the lagging elements, the corners of the tiles, if they do not adhere well to the surface;
- Putty the joints. It is convenient to use acrylic sealant for this with your own hands: the composition is pressed into the seams with your fingers, and the excess is removed with a damp sponge;
- Prime the surface acrylic primer so that the painting of the ceiling tiles turns out smooth and of high quality.
Advice. If the tiles are old and stained, the primer should be applied in 2-3 layers.
Then, along the line where the ceiling and wall (or baseboard and wall) meet, stick masking tape so as not to accidentally stain the wallpaper with paint. Don't forget to protect furniture and floors from splashes.
Now let's select a tool. If you have fairly smooth ceiling tiles, painting can be done with a brush or roller with medium-length natural bristles.
It is difficult to paint a textured surface with high quality paint and will take a very long time; in addition, there will be a lot of splashes and waste of paint. It's better to use a spray gun.
But you will need a small brush in any case - for painting corners, baseboards and other hard-to-reach places.
Main stage
It is advisable to start painting immediately after the primer has dried, before dust settles on the ceiling. The paint must be mixed well before application and, if desired, tinted in the chosen shade.
Advice. Tint the entire volume at once so that there are no differences in tone in different batches.
Standard painting instructions:
- The first layer is applied in the direction of light - from the window;
- The second layer of paint is applied after the first has dried in a perpendicular direction;
- If there are unpainted areas and a third layer is required, it is applied as the first;
- Skirting boards, areas behind pipes and along walls are carefully painted over with a brush.
The painted surface must dry in natural conditions at above-zero temperatures, without drafts and the use of heating equipment.
Conclusion
The video shows the coloring process in sufficient detail; after watching it, you can easily cope with it.
We hope that we have given you a comprehensive answer to the question of whether it is possible to paint ceiling tiles and how to do it.