How to glue 1 meter wide wallpaper yourself. How to hang meter-long wallpaper for one person

And despite the fact that for many domestic citizens this finishing material- a curiosity, it is used more and more often. With the help of meter-long wallpaper, it is possible to achieve a greater width of stripes, reducing the number of seams. This gives aesthetics and allows you to save effort and time to achieve a neat result.

The width of standard rolls is 53 cm. The width of meter rolls is 1 m. Abroad, 70-100 cm coatings are most common today. They are offered in different lengths and designs.

Advantages

Meter wallpaper is very easy to use if you know the technique of applying it. However, in practice, a number of problems may initially arise with the support of one party. To do this, it is better to hire an assistant who will level the coating and support it during the gluing process.

A meter wide coating has a number of advantages:

• Glue wide vinyl wallpapers easier because fewer pieces are needed.
• Less time is spent on work due, again, to less volume of materials.
• No noticeable joints. There are few of them and everyone can be given more attention. It is easy to achieve a seamless effect when the wall looks completely covered.
• The cost of one meter roll with a length of 10 meters is lower than the price of two rolls of 53 cm.

If you evaluate the material from the point of view of design choice, then there may not be many colors and decorative variations, but most of them are modern and stylish.

Sometimes people do not understand how to properly glue meter-long vinyl wallpaper, because it is uncomfortable to hold in their hands and it is difficult to apply it perfectly evenly to the wall. It is important to take into account the subtleties of technology.

The disadvantage is the need to especially carefully prepare the surface, since any unevenness and curvature on a flat seamless fabric may stand out.

If a small fold appears in some place, again, due to the slight unevenness of the walls, this will cause deformation across the entire width of the strip. To avoid this, you can make a horizontal cut at the problem point, but the method does not always solve the problem. If the curvature is significant, you can simply move the canvas - it will “ride along the wall” for 10 minutes until the glue sets.

Covering walls with wide meter-long vinyl wallpaper is more difficult when working in a room with high ceilings. Usually, the help of one more person is required - the first one holds one edge, the other applies the adhesive composition and applies the canvas. In principle, two people can also quickly deal with narrow wallpaper.

To ensure that wide vinyl wallpaper can be hung correctly and accurately, you need to prepare the following materials:

• primer;
• glue that is suitable for working with vinyl wallpaper;
• a roller made of rubber;
• ruler at least 1 meter;
• large width brush for convenience;
• sharp legs;
• scissors;
• plumb and level;
• pencil;
• clean cloth that can be cut and used as rags.

It is very important to choose the right adhesive suitable for use in repairs. If you buy the wrong product, a problem will arise the next time you try to remove the wallpaper, when another cosmetic repair is required.

Gluing wide vinyl wallpaper is easy and quick, having all the equipment at hand.

How to properly glue meter-long vinyl wallpaper? It is important to start work by preparing the surface of the walls. This stage consists of the following actions:

• The old coating is removed from the walls - paint, wallpaper, etc. You cannot leave excess old fabric, even if it seems that it has been firmly applied and does not play a special role. You can remove old wallpaper by punching holes and rubbing it with water. The paint is removed with a spatula. Make sure that when working with sharp objects there are no “scars” left on the wall.
• You can stick wide meter-long vinyl wallpaper after applying a primer. Sometimes it is replaced with low-quality glue diluted with water. This procedure will improve the adhesion of the material and the wall surface.
• If you plan to install foam borders around the perimeter of the room, this must be done before you start treating the walls with glue and, of course, applying wallpaper.
• From the curb or ceiling you need to measure the length of the wall. This will determine how to cut the strip. When the size is selected, and it is better to extend it by 3-5 cm, they begin to apply the composition on top.
• Marking is being done. To do this, use a ruler or level and a pencil. It is better to stop at the level - it is long and will help determine the presence of a slope that should not exist.

Once the markings have been made and the strips have been cut, you can begin application.

How to glue meter-long vinyl wallpaper? Let's look at the detailed instructions:

• Prepare the glue. Apply the material to the area of ​​the wall where you plan to apply the first sheet of wallpaper.
• We start from the top, following the marked lines. When gluing one side, pay attention to the position of the other corner - it should be rotated.
• Use a plastic spatula or roller to go over the surface well. This will help get rid of excess air and remove gaps.
• Extra centimeters of wallpaper are cut off either with a knife or a metal spatula. To do this, the unnecessary piece is folded and cut along the marked line so that it remains outside the working area. If you can't make a cut, the wallpaper is probably still damp. You need to wait until it dries completely.

If we are talking about using non-woven wallpaper, then the work will be simple. The material can be moved for 10 minutes until the glue dries. This will avoid defects and make the joints perfect.

By the way, quick-drying glue should be avoided. It is often offered in a low quality option, but even if you are confident in the source of your purchase, it is still a more difficult product to work with.

If you plan to overlap, there should be an extra 2-3 cm of material on one side.

How to hang meter-long vinyl wallpaper if the place of work is problematic? What is a problem area anyway? We are talking about the corners, the place behind the battery, above the window opening, the doorway.

It is easier to glue wide meter-long vinyl wallpaper if the areas to be used were cut from one roll. Then the combination happens better. The most difficult thing is to select several pieces to create an inconspicuous pattern, carefully executed.

You can also work with meter-long wallpaper on the ceiling. The application technique is simple, but your hands will get sore, because holding wide sheets and gluing them at the same time is not always easy.

We looked at how to properly glue wide vinyl wallpaper and settled on one simple technique. In general, all activities will proceed quickly and without problems if there is someone to help. If an assistant cannot be found, a lot of effort can be expended.

It is convenient to glue meter-wide vinyl wallpaper, and the coating itself usually looks stylish, interesting, and can be perfectly combined with other designs, including tiles, panels, stone (natural and artificial), wood, etc.

How to properly glue wide meter-long vinyl wallpaper with your own hands: video

For people who decide to update the interior decor by re-gluing wallpaper, information on how to glue meter-long non-woven wallpaper will be more useful than ever. Using this particular type of wallpaper for a novice builder is a completely unknown task, because previously, in most cases, walls were covered with standard-width canvases. But at the same time, there was also a production of wallpaper of non-standard, meter width. Using this particular type of canvas, you will have to completely change the sequence of repairs in the room.

The material for making meter-long canvases is practically no different from regular wallpaper, but the width finished products saves a lot of time and own strength for pasting the wall. In our article we will talk in detail about the features of choosing canvases, preparing the wall surface and how to properly glue wide wallpaper.

Types of meter wallpaper

Most of the wallpaper products produced are produced strictly according to a certain standard - 53 cm wide. Products manufactured abroad have a wider range of products, but in most cases the wallpaper has non-standard sizes.

Here are some examples:

• Wallpaper from German and Italian factories has working width canvas 70 cm or 106 cm.
• Belgian factories offer wallpaper roll widths of 90 centimeters, 100 cm or 140 cm.
• French manufacturers sell their products in the following established sizes - 90 or 70 centimeters.

Advantages and disadvantages of meter wallpaper

Before you purchase your favorite non-standard wallpaper rolls, you should familiarize yourself with the advantages and disadvantages of this finishing material.

Advantages of wide wallpaper:

1. In most cases, wide canvases are produced on a non-woven basis, which greatly simplifies the gluing process. To do this, simply apply glue mixture on the surface of the wall and apply the prepared strip.

Important! Before gluing meter wide non-woven wallpaper, you must first level the wall surface with starting and finishing putty.

1. A huge assortment of wallpapers is presented not only with a non-woven base; on the racks you can choose paper-based wallpapers of various colors with a pattern that suits your interior.
2. When pasting walls with wide stripes, the number of seams is reduced.

Important! Walls decorated with this type of wallpaper are called seamless.

1. When using meter-long canvases over large areas, the joints between the strips are almost invisible.
2. The process of covering the wall is greatly simplified due to fewer stripes.

Important! You will agree that it will take less time to cut 5 strips and apply them to the wall than to do the same process with only 9 pieces.

1. The cost of purchasing the necessary material is reduced.

Important! The cost of one wide roll is cheaper than two standard rolls.

Disadvantages of wide wallpapers

There are no disadvantages to this product as such, but there are some minor difficulties when working with them:

• Before gluing wide non-woven wallpaper onto the surface, it must first be prepared, visible irregularities, cracks and other defects must be removed.

Important! If you start gluing without preparation, you will not be able to achieve a perfect fit between the strips, which will ultimately affect the quality of the wall repair.

• Due to the large width of one roll, you may have a situation where a couple of centimeters of wallpaper are not enough to cover the entire room. As a result, you have to buy a whole wide roll, which leads to additional costs and a large number leftovers
• Having some experience in carrying out renovations, you can hang wallpaper of standard width on the wall yourself. In the case of meter-long wallpaper, it is better to find an assistant.

If after going to shopping mall you chose the canvases not standard width, then you just need to know how to stick wide wallpaper on a wall with your own hands.

Preparing the surface for gluing

If you are interested in the question of how to properly glue meter-long wallpaper, then, first of all, you should familiarize yourself with the principles of preparing the surface on which you plan to apply wallpaper.

Important! Preparatory process and you need to start gluing the walls when finishing the ceiling is not yet finished.

So, what actions are simply necessary for successful wallpapering with meter-long wallpaper?

• Take everything off installed switches and sockets. After dismantling, seal the holes with special adhesive tape.

Important! Using a special tape will save time after the repair is completed - it can be removed more easily and quickly.

• Remove from the wall all self-tapping screws, screws, dowels that were used to attach shelves, pictures and other hanging objects.
• Remove the old wall covering without the slightest residue.
• In case too uneven walls should be treated with a dry mixture to level the surfaces or covered with plasterboard to additional insulation rooms from the inside.

Important! If the walls are affected by fungus or mold, then gluing wallpaper on such a surface is strictly prohibited. In this case, first of all, you should remove the affected areas with a special product.

• After treating the walls with a primer, install a special temperature regime, make sure that there are no drafts or overheating of the air.
• On smooth walls Before gluing wide wallpaper, apply a primer; with its help, microcracks and microscopic pores on the surface are eliminated.

Important! Treated walls will not allow the adhesive to be too absorbed into the surface, which will reduce the consumption of building materials and ensure strong adhesion of the wallpaper to the wall.

• If the installation of foam or other types of borders is planned, their installation is carried out before wallpapering the walls.

Required tools and materials

In order to carry out quality wall pasting, prepare all the materials in advance. necessary equipment. For this you will need:

1. A special wide brush for applying adhesive to the surface of the wallpaper;
2. Rubber roller for smoothing wrinkles and eliminating air bubbles;
3. A simple pencil for marking;
4. Scissors or stationery knife;
5. Cotton rags to remove excess glue;
6. Plumb.

Important! When purchasing a product from a specialized point of sale, be sure to check the compatibility of the adhesive with the base from which your wallpaper is made.

How to glue meter-long wallpaper?

Non-standard type wallpaper is divided into the following classes:

• Lungs;
• Heavy;
• Dense.

Although in most cases glue is applied to the surface of the walls, to be sure, check the instructions, because some canvases also need to be treated with glue. Next, we will consider in detail how to glue wide wallpaper on a non-woven backing so that the joints are not visible on the surface.

Important! Work, as in the case of standard canvases, starts from the window and moves in the direction of the incident light. When joining the fabric, be sure to accurately match the pattern or design.

The sequence of covering walls with wide wallpaper:

1. Before starting all work, measure the length of the wall to calculate the required number of whole strips.
2. Mark the location of the first strip of wallpaper - the marking is carried out from the window into the room.
3. At a distance of 105 cm, use a pencil and a plumb line to draw a line from the ceiling to the floor; if the corner is blocked, leave 1-2 centimeters.
4. Pay special attention to wallpapering in the corners of the room. If you do not have specific experience, it is better to leave a small overlap; it can be covered with a canvas on the opposite wall, thus avoiding the formation of an unaesthetic gap.
5. Next, cut the required number of whole strips, taking into account a small allowance along the length.
6. Carefully coat the wall with adhesive, going beyond the pencil line.
7. To carry out repairs, call a partner:
   • One person should hold the wallpaper by the top edge while standing on a stepladder or high table and apply the sheet to the cut line of the ceiling, which is marked with a pencil or foam border.
   • The second participant in the process must regulate the coincidence of the canvas with the vertical marking line.
8. Using a rubber roller, moving from the center to the edges, push out any air bubbles that have arisen; remove excess glue with a cotton rag.

Important! You should not smooth the wallpaper horizontally, otherwise an unsightly gap will form during the drying process, as the wallpaper will shrink back to its original state.

1. Place all subsequent canvases close to the previous one, without gaps or overlap.

Important! It is not always possible to stick an even number of entire strips on one wall; the latter often has to be cut vertically. Glue the canvas on the other wall exactly from the corner, slightly overlapping it. Trim any excess wallpaper height with a sharp utility knife only after the walls have completely dried.

Taping inconvenient places

In the process of pasting walls with non-standard wallpaper, it becomes much more difficult to apply the wallpaper in difficult places - corners, behind the radiator, above door and window openings.

Important! When finishing the ceiling, on the contrary, pasting will take less time. Firstly, you will need several times fewer stripes, and secondly, you will have an assistant, since wide wallpaper is quite difficult to glue for one person.

Here's how to make this task easier for yourself:

• To paste the surface behind the battery, cut the strip lengthwise into several pieces.
• It is quite difficult to combine the pattern in these places; this will require some experience. However, non-woven wallpaper has one positive feature: it can be moved within 10 minutes, so it will not be difficult to straighten the pattern.

Important! This option is possible if an adhesive is used that does not contain components that promote rapid hardening of the adhesive.

• A special feature of wide wallpapers should be noted: when rolled up, they look a little different than they do after being applied to the surface. Consider this fact when choosing a picture.

• To create original design premises, select decorative elements from the same collection as the wallpaper you selected.
• Pay attention to the quality certificate. Make sure of the quality of the selected product.
• If you were unable to apply the wallpaper evenly to the surface the first time, you can remove the strip, treat the wall with glue and repeat the procedure again.
• It is recommended to open a window or door in a room being repaired only one day after the work has been completed.
• To create an original design in a room, you can use several types of canvases in shade and texture at the same time. This way you can hide imperfections or highlight the features of your room.
• When choosing canvases, keep in mind that the horizontal arrangement of the pattern visually reduces the height in the room, while vertical lines and patterns expand the space.

Video material

Now you know how to glue 1-meter wallpaper in room. By applying the tips from the article in practice, you can easily decorate the walls of your apartment with non-standard wallpaper. Such canvases will help decorate your room, highlight the features of the interior and create a unique effect of a seamless surface. A large assortment finished products allows you to choose meter-long wallpaper of any color, shade, texture. However, be sure to pay attention to the characteristics regarding their wall coverings and the quality of the product.

If previously classic wallpaper had one width, 53 cm, now there is an alternative - meter-wide rolls. There are other samples. These are mainly foreign products. Premium class products especially vary in size, which can be 140 cm, 90 cm, or 70 cm. And if there are difficulties with the usual size self-gluing It was not much, then with a meter width they are complemented by inconvenience for one person.

Such materials would have become very popular if not for this and some other shortcomings. Therefore, before choosing such a product, you should carefully weigh its pros and cons.

Advantages

• Undoubtedly, main feature increased wallpaper width - reduced number of seams. And this is especially true in large areas. In fact, such products were invented to achieve “seamlessness” of wallpaper for walls. After all, when gluing such wallpaper, there are half as many seams, which means they are less noticeable.
• Installation is also simplified. Since much less movement is required to hang wide wallpaper. Therefore, the savings in time and effort are significant.
• Thus, costs are also reduced. After all, the price of a roll of this width is slightly less than the cost of two 53 cm each.

Flaws

• More serious preparation of the base is required. If the wall or ceiling is uneven, it will be impossible to properly glue such products. The joints will turn out uneven.
• As a result, wallpaper consumption may be higher. For example, if you have another piece of 20 cm left to glue and you need to start a new piece. Thus, almost the entire meter roll will remain untouched.
• Of course, it is more difficult for one person to work with such material. This is especially true if you need to glue the ceiling.

First of all, you need to very carefully prepare the surface. Old finish needs to be removed. The surface needs to be cleaned sandpaper or a grinder with an attachment. If there are significant irregularities, they will have to be removed using putty. Before using it, the surface is primed. After puttying, the walls are sanded again, this time with sandpaper or a finer-grit wheel.

Finally, you need to prime the surface several times to ensure proper adhesion.

When starting gluing, you should maintain the correct temperature conditions. Otherwise, it may cause problems during operation. Therefore, it is better to do the gluing before starting heating season. After all, in the radiator area the temperature will be different from the rest. In this case, the surface will have to be glued more carefully.

Drafts should not be allowed in the room. Therefore, windows and doors must be closed.

It is worth cutting the canvas as you glue it, and not in advance.

It will be easier for one person to handle wide wallpapers, because they are usually non-woven. And they don’t need to be coated with glue. It is applied only to walls. For such wallpaper, special glue is used. Moreover, it is worth choosing products from a recognized manufacturer; this will simplify the task and also improve the quality of the result.

After applying the glue and cutting the wallpaper to size, take a strip and apply it to the junction of the wall and ceiling, grabbing a little more material towards the top, which will then be cut off. When gluing, you need to focus on a vertical mark made in advance using a plumb line. It is most convenient for one person to first glue the middle part so that the canvas is fixed to the surface. And then smooth it over the entire width. The other canvas is glued end-to-end - as close as possible to the first. If non-woven material is used, the position of the strip can still be adjusted for some time. However, this is only possible if quick-drying glue is not used.

For smoothing, it will be convenient to use a rubber roller when working with a wide canvas. This way, it will be easier to reach both edges, and uniform smoothing will be ensured.

Difficult available seats Gluing meter-long wallpaper is more difficult than usual. Therefore, they can be cut into pieces. For example, if you need to stick them on the area around the radiator.

Wallpaper even a meter wide can be hung alone

Even if wide wallpaper is used, this does not mean that one person cannot cope with the task of gluing it. It is only important to prepare everything, including tools, and then there should be no problems. Yes, physically it can be more difficult than working with standard-width wallpaper. However, you will have to make fewer movements.

Therefore, you can additionally watch the video instructions, which will allow you to better understand the issue.

How to hang non-woven meter wallpaper

Today we will look at how to glue meter-long non-woven wallpaper in detail. Although it’s worth saying right away that the meter is not the most big size. Although sometimes gluing such ones is problematic, especially if there is no one to help.

Today we will look at how to glue non-woven wallpaper and how to do it correctly. Also in the video and photo below you will also find useful information, which will help you in performing this work.

Wallpaper products in Russia are manufactured according to a single standard; the width of such wallpaper is 53 centimeters. Speaking about foreign-made wallpaper, their range is much larger, and the width itself is often non-standard.

A striking example is wallpaper from Germany or Italy, of which there is now so much in our stores; their width can be either 106 or 70 centimeters.

Select the desired type

Attention: In addition, you need to pay attention to the special size wallpaper. Such products are mainly produced by Belgian wallpaper companies. The width of such wallpaper can vary from 90, 100 centimeters right up to 140. If we talk about French wallpaper, then their width is 90 or 70 centimeters.

Once you have decided on the width of the wide wallpaper, you need to understand the gluing technology.

Here you need to take into account the following nuances:

• Firstly, often wide wallpaper is non-woven wallpaper, so there is no need to soak it with glue.
• Secondly, wide wallpaper is glued quickly and easily, you just need to smear a previously prepared wall and simply attach a dry piece of wallpaper to it.
• Third, Special attention You will have to pay attention to leveling and removing air from under the wallpaper.
• Fourth, wallpaper can be not only non-woven, but also paper, and here there is a slightly different pasting technology. Each case must be approached individually.

What are the advantages of wide wallpapers?

The most important advantage is the smaller number of seams on the wall, the so-called “seamless” effect.

However, besides this there are several more undeniable advantages:

• Simplified and quick pasting procedure.
• In addition to saving time, there is saving money. Agree, buying one roll of wide wallpaper will be cheaper than two rolls of regular wallpaper. In order to save as much as possible, you need to correctly calculate how many rolls you will need. When calculating, it is important not to forget about the material that will be used for allowances and hard-to-reach places. Just by not forgetting about all these points, you can correctly calculate the required wallpaper footage.

Now let's see what disadvantages non-standard wallpapers have:

• There are no downsides as such, but there are some minor inconveniences. To avoid these inconveniences, you simply need to thoroughly prepare the surface where the wallpaper will be glued (see Preparing walls for wallpapering: we do it ourselves). Otherwise, if the walls are not leveled, there can be no talk of high-quality and even wallpapering.
• Therefore, preparing the basis for future work is a very important part, since it is a kind of foundation on which the wallpaper will rest. Therefore, this stage of work must be completed as efficiently as possible.
• The second inconvenience is that you will have to buy an additional roll of wallpaper, since sometimes it happens that you need to re-glue it due to the fact that the length of the wallpaper may not coincide with long wall. But this is normal and happens with standard wallpapers too. Thus, a slight overconsumption of materials is possible, therefore counting the footage of wallpaper.
• The third minor inconvenience is that it is most convenient to glue wide wallpaper with an assistant, since it will be very difficult for one person, and then the quality may suffer. This is because the canvas itself is wide, so one person must hold it, and the other must smooth the wallpaper. Only with coordinated work is a high-quality result possible, which will not have to be redone in the near future.

What to look for when choosing wide wallpaper

The most important thing to remember when choosing wide wallpaper is that it will look different in a roll and on the wall. Therefore, it is better to buy wallpaper in specialized stores, where images of wallpaper are presented on stands. This way you can see what you are choosing and how it will look on the wall.

Here are some tips to help you choose wide wallpaper:

• In order to create an interesting and original design, it is best to buy all materials from one collection, so everything will look harmonious and beautiful.
• When choosing wallpaper, always look for a certificate that will confirm its quality
• When examining a stand with wallpaper samples, start looking at the bottom part first, and then only the middle. As practice shows, most sellers bring to eye level those items that are not in particular demand, but still need to be sold. And those wallpapers that are cheaper and maybe look much better are lowered to the very bottom, or raised to the very ceiling.

This technique is the most common, so if you remember this, you will not fall for the tricks of cunning sellers who want to sell low-quality goods for a lot of money.

How to properly prepare the surface for pasting

This is one of the most difficult parts, since the quality of wallpapering depends on its quality.

First of all you need:

• Get rid of the top covers of sockets and switches. For safety, all holes should be covered with adhesive tape, which can be easily removed after gluing.
• Remove all screws and nails from the walls so that they do not interfere with high-quality and even wallpaper pasting.
• Completely clean the walls from remnants of the old coating. This is very important because even small pieces of old coating can interfere with the repair. Since the wallpaper may not lie flat, or the glue will not be applied well to the wall. In addition, when preparing, you must not forget that there should also be no repair dust on it.

In houses of old construction, the walls are quite rarely even. Therefore, here we proceed as follows:

• You just need to level the surface using a dry mixture or simply cover the walls with plasterboard.
• The second option is faster and more reliable. In addition, using drywall you can also make internal thermal insulation, this is especially important when mold appears on the walls.

Attention: In addition, you need to pay attention to the temperature in the room. During repair work, it is better to avoid drafts and severe overheating of the air.

Priming the walls is an important step in preparing for wallpapering.

Smooth walls are the key to good and quality repairs, since it is the primer that helps hide numerous chips, irregularities and holes in the wall. In addition, applying wallpaper to primed walls (see Primer for wallpaper: which one to choose and how to use) will require much less glue. If you apply glue to unprepared walls, then part of the mixture will quickly be absorbed, and the wallpaper will stick very poorly.

Attention: Very important point The point is that before starting the gluing process, the primer must be completely dry. This is what guarantees strong adhesion of the wallpaper to the wall. If you plan to decorate the room with different foam borders, then it is best to do this before the wallpaper is pasted over.

First of all, you need to pay attention to whether the purchased glue and wallpaper are compatible, since for each type great importance has what group your wallpaper belongs to. So, they can be: light, dense or heavy. And the wallpaper has its own adhesive mixture, which will guarantee a good, and most importantly, high-quality result.

• By using the wrong adhesive for wallpaper, you run the risk of poor quality work. renovation work. Usually, with non-standard wallpaper, it is customary to apply glue directly to the wall, but to avoid unpleasant incidents, the instructions must be read immediately.
• Since it is better to be absolutely sure that you are doing everything correctly than to redo everything in a hurry, besides, you will spend not only the materials, but also your time on the rework.

How to glue meter-long non-woven wallpaper so that the joints are not noticeable?

• Firstly, it is best to start gluing from the window and in the direction in which the light falls. This way you can make the seams less noticeable.
• Secondly, if the wallpaper has a pattern or patterns, then you must definitely adhere to them. This way you can create the effect of a continuous pattern.
• Thirdly, wallpaper should be glued starting from the middle and from the top, then the likelihood of a good and neat pasting will be greater.

Attention: And last but not least important advice– use several stepladders to paste wide wallpaper. This will make it more convenient to glue, and there will be less body movements and movements.

In general, it should be noted that the process of covering walls with wide wallpaper is not much different from ordinary wallpaper. In both cases, the most important thing is a well-prepared base and careful and thoughtful movements when gluing the wallpaper itself. It is also very important not only to know the technique of how to properly glue wallpaper, it is also important to be able to put all your knowledge into action.

Step-by-step instructions for covering walls with wide wallpaper

Now let's look at the features of gluing:

• First you need to determine how many strips of wallpaper you need, and to do this you need to know the total length of the walls.
• The marking of the first canvas is also very important, as this is the basis for correct further gluing.
• Particular attention should be paid to wallpapering in the corners. You should always leave an overlap so that there are no joints or gaps, as an unsightly gap may form.
• Next you should cut required quantity stripes for one wall. After this, you need to apply glue over the entire width of the canvas, slightly beyond the marked lines.
• It is best to start wallpapering with an assistant. So, one person holds the top edge, and the second carefully smoothes the canvas.
• When smoothing the wallpaper onto the wall, the main thing is to remove all air bubbles. You need to start from the middle and work towards the edges.
• While continuing to glue the wallpaper, you need to do it closely so that there are no overlaps or gaps, as this will not look very aesthetically pleasing.
• It’s not always possible to guess the number of whole strips, so sometimes you have to cut one of them vertically. Further pasting should be continued from the corner, continuing the pattern or design. The glue that will protrude at the joints can be removed using a regular clean rag.

How to properly glue wallpaper in awkward places

Wallpapering is not an easy task, especially when it comes to such difficult places as door openings, radiator areas, or just corners.

• But it’s most convenient to cover the ceiling with wide wallpaper. Since everything is one, several people are needed for pasting, but fewer stripes will be needed. Consequently, pasting will be carried out much faster.
• To carefully and beautifully hang wallpaper around and under the radiator, it is best to cut a strip of wallpaper into several small pieces. The most the best option will be cut from several parts from one canvas.
• The most big problems with wallpapering in hard to reach places arise with the joining of a drawing or pattern. It is very difficult to achieve a complete match of the pattern. Therefore, all actions need to be thought out in advance so as not to lose a lot of material, and most importantly, time.
• A huge advantage of non-woven wallpaper is that it can be moved within 10 minutes after sticking it on the wall. Therefore, do not use quick-drying glue, as you can simply ruin everything. This glue can only be used by professionals who are already experienced and can paste wallpaper correctly the first time.

How to stick custom wallpaper yourself

Sometimes there are situations when there is no assistant nearby, but you need to hang wallpaper. This can be done by one person, although many believe that this process requires two, since the width of the wallpaper can be about a meter. But the reach of a human hand reaches one and a half meters, so you can hang the wallpaper yourself. The most important thing is to think through all your moves in advance and act quickly.

Even if you don’t succeed in pasting the wallpaper perfectly the first time, don’t fall into despair and don’t quit your job. Since you can always re-glue the canvas, and then repeat several times this process, you will get involved, and it will start to work out for you.

But the most important thing is not to forget about technical requirements to pasting wallpaper, because if there is a draft, then you definitely won’t succeed. Remember that doors and windows can be opened after 24 hours have passed.

At the very end, I would like to draw your attention to a few rules that may seem simple at first glance, but they are very useful and important. Only by following these tips will the result of your work exceed all expectations.

So:

• Firstly, try to prepare all the necessary tools in advance so that during the pasting process you do not get distracted, but only concentrate on the work. Thus, you will not only not waste time searching the right tool, but you will be able to fully concentrate on the process.
• Secondly, it is very important to know the technique of covering walls with wide wallpaper, since then you will have a clear plan according to which you will act.
• Thirdly, in addition to the technique, you need to understand how and where to glue. The main thing to keep in mind finished picture, understand what kind of room you want. To make the room look original and stylish, you can use several types of wallpaper. This way you will give the room more expressiveness and texture. This combination of wallpaper is an excellent solution to hide some flaws and unevenness of the walls.

An example of this good combination different wallpapers can be called horizontal alternation. Using this technique, you can visually reduce the height of the room if the ceilings are very high, and using vertical alternation you can visually expand a narrow room. You can also do color accent on one wall, it also looks very stylish and fashionable.

As a result, it must be said that pasting walls with wide wallpaper has many of its own nuances and secrets that allow you to quickly and efficiently hang wallpaper. You now understand how to apply non-woven wallpaper and the instructions will help you do everything correctly. Moreover, having done everything yourself, the final price will not be significant.

Meter wallpaper remains a curiosity for most domestic users, although they differ from ordinary roll products only in their width of 1 meter. Thanks to this feature Finishing work take less time and effort, but the task becomes more difficult if you have to work alone. In this case, it is important to know how to glue meter-long wallpaper for one person.

If speak about positive aspects this material, the following stand out in particular:

1. A small number of joints. To finish one room you will need half as many strips, so you will have to worry less about the correctness of the joints. It also gives the impression of a monolithic coating.
2. Speed ​​of work. Wide fragments cover large area

, it’s easy to calculate that it’s easier to glue three stripes than six.

• But there are also some disadvantages:
• The material requires a perfectly prepared base.

High consumption. Wide wallpapers are more expensive, so if a small strip is not enough, you will have to pay for a whole additional roll.

On a note! Typically, wide wallpaper is applied by two or three people, but you can do it yourself if you work quickly. If a person has already had to glue ordinary half-meter wallpaper, then with meter-long canvases

he can handle it

Before gluing wide wallpaper, you need to carry out a number of procedures, which include preparing tools and surfaces, as well as calculating required quantity material.

How to calculate wallpaper footage

Correctly carried out calculations will save money and also save you from making a second trip to the store or ordering additional material on house. The first step is to calculate the perimeter of the room. To do this, you need to measure the length of adjacent surfaces and multiply the result by 2. Let's say one wall is 3 m long and the other 4 m. This means that the perimeter of the room is 14 m. Since we are talking about meter-long wallpaper, it will take 14 strips to cover the wall.

Now you need to find the largest distance from the floor to the ceiling and multiply it by 14. For example, the height is 2.5 m, multiply by 14, it turns out 35 meters. This minimal amount material. If the room has windows, doors, a balcony, etc., it is better not to subtract their dimensions during calculations, this way there will be a supply of material left.

Some people think that it is not necessary to tape off the area behind the furniture, since the wallpaper will not be visible there. Here the decision is only up to the home owner, but it is important to remember that when rearranging, bald spots will appear on the wall. A bulky cabinet that won’t move until it’s renovated doesn’t need to be covered with paper.

When calculating the amount of material, it is recommended to take into account 1-2 rolls of stock. They may be required not only during pasting, but also after. If there are children or animals in the house, then damage to the wallpaper is a matter of time. So that later you don’t have to look for the same ones to replace the area or completely re-glue, it is better to immediately purchase a supply.

Surface preparation

When gluing meter-long wallpaper, the most difficult stage is the preparatory stage, as is the case with any other types of these products. If the apartment goes major renovation or finishing after putting the object into operation, then all of the following measures must be carried out during work on the ceiling. So, you need to do the following:

Wallpapering should only be done on clean and well-primed walls.

1. Remove the front panels from all sockets and switches and carefully seal the resulting holes.
2. Remove all fasteners from the walls: screws, nails, dowels, and so on.
3. If there is coating on the walls, you need to remove it. As a result, not even a small fragment of finishing material should remain.
4. Check if the walls are level. To do this, apply a building level to them at different points.
5. For small curvatures, it is enough to use finishing putty, if the blockage is serious, plastering may be required.
6. Wait for the material to dry and sand the area.
7. Before gluing wallpaper on the walls, it is necessary to treat the coating with a primer. This material will increase adhesion and save on glue. The drying time for the compositions varies, but usually it is several hours.

Required Tools

To carry out the work you will need:

• wide brush, roller or brush for applying glue;
• container and construction mixer for preparing the composition;
• ruler, level, stationery knife, marker or pencil;
• rubber spatula and roller for ironing wallpaper;
• a rag to remove glue residue.

To paste walls with wide canvases, a generally accepted wallpaper tool is used.

Pasting

Step-by-step instructions on how to glue wallpaper alone:

1. Prepare adhesive composition according to the instructions on the package.
2. Use a level and a pencil to mark the top border.
3. Fold a small part of the strip to form a corner.
4. Place the material against the wall and press firmly.
5. Iron the pasted wallpaper rubber spatula, moving from the center to the edges. You can also use a roller to get the air out.
6. Using a metal spatula and a utility knife, trim off the excess.
7. Inspect the strip and make sure it is completely stuck to the base.

Damp wallpaper is difficult to cut, so in some cases you will have to wait.

Regardless of the width of the canvas, the room is covered according to the same pattern

Docking

The glued sheet must be butted against the adjacent one. If there are patterns on the wallpaper, then it is important to adjust their height. During gluing, the strip must be smoothed at the same time and ensure that it does not move away from the previous one. In this case, it is forbidden to stretch the material to achieve joining; after drying, it will shrink back and there will be a gap.

The joints are rolled with a special roller; an attempt to forcefully pull the sheets together at the seam will lead to the appearance of a gap after drying

On a note! If you need to glue non-woven wallpaper, you can move it along the surface for 10 minutes after pasting. If you use another type of wallpaper, then you should choose an adhesive without additives that accelerate drying.

If the joint does not work, you can overlap the wallpaper and then cut off the excess using a utility knife. The remaining unglued side should be coated with glue and ironed with a rubber roller.

Wallpaper joining with overlap and trimming

Pasting in hard-to-reach places

Now let’s talk about how to hang wallpaper for one person in the corners, behind the radiator, above the doorway. It is better to arrange them at the main stage of pasting. To do this, leave a small overlap (about 2 cm), which will overlap the adjacent wall. To hang wallpaper behind and under the radiator, you need to cut the material into small pieces and select a pattern. After this, the pieces are glued to the wall, as described above.

A simple way to cover the wall behind a radiator

Another difficulty that you will have to face is covering the area with sockets. If on preliminary stage The front panel has been removed and the voltage has been turned off, then you just need to glue the strip, not paying attention to the hole, and then use a knife to cut through the wallpaper. If you get uneven edges, that’s okay, the front panel will hide these imperfections. In case of door jambs it is necessary to glue the canvas with a margin of 5 mm. After smoothing, the excess length is trimmed or covered with a casing.

It is advisable to cut holes for sockets and switches after the canvas has dried

Before working with meter-long wallpaper alone, it is recommended that you familiarize yourself with some expert advice:

1. There should be no drafts in the room, a suitable temperature range is from +5 to +25 C. In addition, it is also quite difficult to work in wet rooms, so preparatory stage it is necessary to ventilate and carefully close the room.
2. If gluing is planned in the cold season, then it is better to turn off the radiator. If it is not possible to do this, it is recommended to reschedule the work while the central heating is turned off.
3. Most adhesives are universal, but when choosing, it is better to ask the seller what type of products this composition is suitable for. This will help fix the wallpaper on the surface better.
4. If immediately after pasting, defects are noticed, in particular uneven joints, it is necessary to lift the canvas with a spatula and correct the problem. It is very important not to pull the stripes.
5. After gluing, sometimes difficulties arise with cutting the material. To do this, use a stationery knife or scissors. You need to press the excess part with a spatula and run a knife along the markings. In the case of scissors, you need to bend the edge along the markings and cut it off.
6. If there are uneven cuts at the top or bottom of the wall, you should not try to fix it. As practice shows, this will lead to bad consequences. It is better to purchase skirting boards that will hide imperfections.

If ceiling fillets are not provided, then the perimeter can be cultivated using a frieze