DIY children's clothing hanger. Floor hanging racks for clothes: economical and fast! Wall Hangers Ideas

Ideas for making clothes hangers with your own hands: photos and drawings of a hanger for the hallway. Various options making a homemade clothes hanger.

You can make a clothes hanger with your own hands from scrap materials that are lying around idle at home. Craftsmen never cease to amaze with their ingenuity; a homemade clothes hanger made from ordinary forks is a clear example of this.

A similar version of a hanger made of metal spoons.

Clothes hanger made from a pallet.

Here is a clothes hanger made from a pallet, and again the old pallet has a use. A wooden pallet is sawn into two parts, from each half of the pallet you can make a hanger, just paint the workpiece and attach the hooks to the boards with screws.

Another option for hangers made from a pallet, here a whole wooden pallet is used, it is sanded sandpaper, paint the boards in different colors and attach the hooks.

Clothes hanger made of wood.

This hanger is more suitable for a summer house or a bathhouse; wooden knots fixed in a wooden structure are used as hooks.

Hanger made of metal profile and bars.

The structure consists of several bars and metal profiles fastened together.

DIY wooden hanger.

Here we use a wide board with an imitation of a piece old wood, coat hooks are made of bars and secured with screws screwed into reverse side boards.

The wood is burned with a blowtorch, which achieves the original texture of the product, The final stage coat the hanger with clear varnish.

In this version, there was some carving work.

And in this design, instead of hooks for clothes, door handles, which can also be coated with paint.

An interesting option for a hanger made from boards.

An original homemade hanger in the shape of a tree.

To make it, thick plywood is used, the outline of the wood pattern is drawn and cut out electric jigsaw. The structure is painted and attached to the wall with dowels.

Hangers for children's clothes.

The hanger parts are cut out of plywood with a jigsaw and painted. bright colors, in this way you can make a hanger in the form of animal figures.

DIY floor clothes hanger.

The simplest version of a floor-mounted clothes hanger made from pipes; to make it you will need a thin aluminum pipe 2 - 2.5 m long. The pipe needs to be bent as shown in the figure and the clothes hanger is ready.

Wall hanger made of pipes.

And this hanger consists of a pattern on the wall, coat hooks are attached with dowels directly to the wall.

The hallway, in a sense, is the face of the entire apartment. I want to feel coziness and comfort from the very entrance, so sometimes there is no point in cluttering it with massive cabinets. In this article we will tell you how to properly make a wall hanger with your own hands from wood and other materials, we will show drawings, photos and videos on how to create a clothes hanger in the hallway.

Some features

A wall hanger can be placed not only in the hallway, but also in the bathroom and kitchen, so you can make it design solution, which will add zest to the interior of the room. The main requirements that can be presented to this element are:

simplicity;
ease;
simplicity;
strength;
availability of materials;
compactness.

According to the installation method, it can be:

wall;
ceiling;
mobile.

In the first option, it makes sense to make a corner structure. If you install the hanger on the floor, you can place it on more weight. Options can be combined, creating, for example, a wall-mounted hanger with floor support.

The floor structure is not usually used in bathrooms and kitchens. This is impractical: such a hanger takes up quite a lot of usable space.

Hangers are classified according to the method of hanging clothes:

with hooks;
with a barbell under the shoulders.

In the first case, the entire product will take up significantly less space, but you can hang any clothes on hangers without fear that they will wrinkle, stretch and thereby lose their presentable appearance.

Materials

Wood and metal are most often used to make hangers. Someone may decide to order a ready-made forged structure for themselves if it fits into the overall picture. Hooks can be attached to:

glue;
self-tapping screws;
magnets;
suckers.

If you plan to hang outerwear that is winter time is especially heavy, then the best option would be to use self-tapping screws. The rest are perfect for the bathroom or kitchen, where towels, bathrobes or oven mitts are usually placed.

The simplest

This option is used most often and it has a lot of variations that can be combined and combined. In order to make such a design, we will need:

the material from which the hanger will be made;
hacksaw or jigsaw;
fastening material;
roulette;
corner;
level;
pencil or marker.

The most simple solution there will be a bar with hooks. To make it, we need a wooden plank (it must be free of cracks and chips, and also well dried); instead, you can use part of a sheet of chipboard or MDF. Its length is selected to suit your needs, and the width should be sufficient to place hooks on it. Wooden base can be coated with varnish or stain; the slabs do not need this, because They already have a laminate applied to them. After this, several holes are drilled in the wall (their number will depend on the total length).

The distance between them should be such that there is a 5 cm indentation from the edges of the board. To ensure that the holes are in the same plane, use building level. Dowels are inserted into the holes, and the base is screwed to them using self-tapping screws. Hooks are already attached to the bar itself. If you choose good fastening material, then this design can withstand heavy outerwear.

You can get creative with hooks. Instead of buying them, you can use, for example, old spanners. First they are cleaned and polished. After this they bend. Two holes are drilled into them, and the keys are screwed to the bar. For these purposes, you can also use forks. You just need to take steel ones, because... aluminum is very fragile. The cloves themselves can be given an interesting shape.

Tree twigs are also suitable: such a twig needs to be located on a small branch. To fix it to the base, you can slightly grind down the plane of the branch using grinding machine, after that the hook is simply screwed on with self-tapping screws. It is not necessary to place them in one row. You can do them at different levels. If you draw a staff, the hooks will serve as notes. A rectangular plank is not a requirement. On the round one you can hang hooks like numbers on a clock, and draw arrows in the middle. In addition, the base can be made in the shape of a heart, cloud, sun, etc.

It is important that the wall under such a hanger is finished, but not whitewashed. This is necessary so that things do not get dirty.

Let's complicate it

To prevent things from getting dirty on the wall, you can slightly improve the entire structure. You need to take two planks of the same size. Their length must correspond to the width of the planned structure. They are fixed in a horizontal position parallel to one another (one higher, the other lower). Next, we fasten several more vertical slats between them (we do this using self-tapping screws; the length of the fastening material should be twice the thickness of the slats in order to tighten them well together.).

In width they can be the same as the previous two or a little thinner, in length - 1-1.3 m. If this is a hanger in the hallway, then it is good to attach a shelf on top for hats and caps. To do this, you will need a board 25 cm wide (you can take several elements that are smaller in width and secure them together using two jumpers). It can be fixed to general design with help metal corners or wooden jibs.

There is one more interesting option. To make it, you will need a block with dimensions of 5x5 cm. You need 7 of them. 30 cm each. To begin with, the boards are cleaned using a sanding machine. Sharp corners can be smoothed out. After this, cover them with several layers of varnish. Next, they will need to be secured to the wall using a hammer drill and self-tapping screws. They need to be arranged in the shape of two letters P, which are connected at the bottom by a jumper.

In each plank using feather drill 15‒20 mm we make two holes. Next, we cut out cylindrical dowels with a diameter for our hole. We clean it and paint it to match the color of the hanger. We coat them with PVA glue and embed them, let them dry well.

Most likely, you will like a hanger in the form of a tree. To make it we need MDF sheet, chipboard or plywood. Using a marker, draw the outline of the plant. Next, use a jigsaw to cut out the resulting shape. The ends are processed and painted over or edged (in the case of chipboard). Using self-tapping screws, the product is attached to the wall, and hooks are hung on the branches. Here you can use real knots, as in one of the previous options.

Ceiling and tramples

Hooks are not always the way out of the situation. Often you need to make things fun on trempels. In order to ensure this, it is necessary to provide a horizontal rod. In this role you can use, for example, wooden plank 50x50 mm. It is better to round off sharp sides using grinder, then the hangers can move freely and can be easily removed. If the plank is long, then it is necessary to provide a horizontal jumper. Such a rod can be attached to the jibs of a hanger with a shelf, which was mentioned above. Instead of a wooden holder, you can use a special chrome-plated furniture tube. It is fixed using flanges.

You don’t have to use the wall for mounting at all. For this we need a chrome tube. We cut off two pipes 90 cm long. We attach two flanges to the ceiling (we select the distance between them as needed). We insert and fix these pipe sections into them. Next, we take another tube, its size will be such that it fits between the two hanging pipes. We mount the horizontal tube to the vertical ones using angles. The result is a minimalistic hanger for trempels.

This article is intended to give direction to your imagination, not to provide everything. possible options. We are sure that everyone has things at home that can be used in interesting ways.

Video

See what kind of hanger can be made from just a few planks:

Photo

Modern sewing and marketing technologies can provide us with a truly limitless amount of clothing. And all of it needs to be laid out and hung somewhere. Ideal for dry and clean closed cabinet with shelves and a hanger bar. However, removed after working day, wet or dusty clothes in the closet are closed. For such cases, there are floor hangers.

They are also good because bulky wardrobe items, when placed on such a hanger, do not come into contact with the wall, as a result of which both the wallpaper and the clothes themselves are not damaged. At the same time, the hanger can be folded, removed, rearranged at any time, which is very important in small apartments.

If you make it yourself from scrap materials, then it also has the following advantages:

the price is significantly reduced;
a thrifty owner feels pleasure from the fact that waste from repairs has gone into business;
the hanger turns into an original, exclusive piece of furniture;
any beautiful, good thing works for the positive reputation of its author.

Floor hangers: types of materials and designs

If desired, the hanger can be made from any durable material, but the most commonly used are:

wood, especially fine-grained wood (walnut, birch, beech);
metal, such as profile trim or reinforcement;
polypropylene water pipes.

Structurally, floor hangers are divided into several different categories.

Orderly, it is also a floor lamp hanger, or hanger. Represents vertical bar on a support in the form of a pancake or legs; in the upper part there are hooks for clothes and hats. Takes up minimal space, high-positioned hooks eliminate injury. But such a structure easily collapses due to the small support area. Used for placing jackets, raincoats, coats in hallways.
Frame theater-wardrobe. A long hanger with an arbitrary number of hooks that can be arranged in several rows. Stability is ensured by wide legs, which, however, take up a lot of space. It is rational to put it in wide hallways based on a large family and frequent guests.
Folding frame. A small hanger, half the height of a person, designed to store a suit in an unfolded form. The upper element of the frame is made in the form of a trempel - hangers for a jacket, shirt or blouse, the second element assumes the placement of trousers. Special hooks for ties and belts are available. Looks solid in the bedroom, easily folds and stows on a closet or under the bed.

Attention! Any floor hanger can fall, so if you have small children in the family, it is better to choose a wall-mounted option.

We make a beautiful wooden hanger with our own hands

To make a good hanger for a casual suit, you will need the usual set of tools, which includes, among others, a drill, a screwdriver and a hammer. The work will consist of the following stages.

We choose a drawing taking into account the size of the clothing and the dimensions of the room.
We prepare materials. Pine is considered an ideal wood for DIY processing. We purchase pine timber from a hardware store with a reserve, taking into account possible defects in the work.
We cut out the parts according to the drawing. Where necessary, we achieve symmetry. We process flat parts with a grinder, curved parts with sandpaper.
Selecting screws for wood suitable color, mark the places for fastening and drill holes, the diameter of which is approximately half the diameter of the screws.
We assemble the product by tightening the screws by hand.
We treat with stain and varnish.
We glue soft strips of felt onto the parts in contact with the floor. If desired, the stands can be equipped with wheels.

Advice. Raise the trouser bar higher, then, if necessary, you can place several hangers with shirts across it.

Original hangers can also be made from:

a worn-out floor lamp, replacing the lampshade with hooks; the metal rod can be braided with vine or rattan;
the back of an old chair, separated from the seat along with the back legs;
a small dry tree mounted on a solid base.

Advice. Hooks cut from the forks of the branches of an unnecessary Christmas tree look original.

Pipe hanger: creative and economical

After repairing a plumbing unit, there is always a lot of scraps left PVC pipes, which are a pity to throw away, but there is nowhere to adapt them. They can make an original floor lamp hanger, especially if you place it in a bathhouse or in a country house.

The main problem with such a hanger is its stability, so the base must be made as heavy as possible. To do this, sand or gravel is poured into the sections of pipes from which the base is made, after which the ends are closed with plugs. The operating procedure is as follows.

We draw a design for the hanger and mark all the straight pipes, fittings, splitters and plugs on it. We buy what we need.
Remove burrs (with sandpaper) and dust (with a rag).
We stretch the rope through all the parts and tighten it in the workroom or in the yard. We paint with spray paint desired color and leave to dry for two days.
We assemble the structure using PVC glue.

Aerobatics: floor hanger made of metal

You can create a truly beautiful metal hanger if you master the techniques of cutting and welding this material. However, there is a fairly simple way to make a designer hanger by assembling metal elements with wooden ones.

For work you will need a wooden beam round section and several copper plumbing accessories:

6 knees;
4 tees;
4 plugs.

Important condition: inlet diameter the timber must match the diameter of the copper parts. We cut the timber into pieces according to the drawing and tightly place coppers on it.

We are convinced that if you need to add a floor hanger to your home decor, you don’t have to buy one. It is better to purchase materials and create a functional but unique thing with your own hands.

DIY floor hanger: video

A huge number of offers of floor clothes hangers makes you think: what if you do it yourself? At home, a hanger for a suit, hangers for outerwear and children's clothing, which are covered with a dust cover, are relevant and practical furniture. Such furniture fits perfectly into the interior; it can be easily moved around the room and apartment.

Clothes on such a hanger wrinkle less than in a closet. It is sometimes called a dressing room, because it allows you to partially unload clothes furniture cabinet, and the costumes will be on display. It is also convenient to place children's things on this design. A cover for the hanger is necessary as protection from dust.

The main difficulty in making it yourself is processing surfaces and maintaining dimensions. Part matings should be maximum, which is not always possible to achieve manually. Therefore, when making a floor clothes hanger, you should use a combined method: some of the parts and operations will have to be ordered from professionals.

Model selection

Most convenient model According to surveys and the number of sales, the floor hanger for a suit with a cover is a hanger of the following design:

The dimensions can be changed at your discretion. On the top radius board with back side It is advisable to strengthen the hook for children's hangers. This will expand the range of possibilities for using the hanger. The thickness should not be greatly reduced, since parts may bend under load. Increasing the size within reasonable limits will make the hanger more stable.

You can choose any material: beech, ash, cedar, birch or pine. The latter is the most accessible. It is easier to process and finish. When choosing a material, the moisture content in it is especially important, since when drying, raw wood parts change their geometric shape. Simply put, the part may become bent or curled up like a propeller. Once the model has been selected, you should begin preparing materials.

Material selection and preparation

For making at home, it is best to choose pine blanks. They are the most commercially available and easy to process. Suitable for children's and wardrobe hangers. They are not electrified when covered with a synthetic cover. Their advantages in comparison with other types of wood:

Manufacturing of parts

This is the main operation on which quality depends finished product. As can be seen from the drawing, you should prepare or buy wooden blocks and pine boards. They should not have knots larger than 5 mm. The wood must be dry. Curvature of bars and boards is not allowed. When purchasing, be sure to take into account those changes that were made taking into account the specifics and location. Some tips:

The bars should have a small margin for processing. When purchasing, it is better to take two blanks for one part, taking into account possible defects during work;
Correct geometric shape. This is checked visually. The curves of the product are immediately visible;
The length is taken with a margin of at least 3 cm. It will not be possible to carefully saw off 5 mm at home with a jigsaw;
You will have to look for round crossbars with a diameter of 18 mm. If this size is not available, then these parts will have to be ordered;
It is advisable to treat finished parts with antiseptic agents before varnishing;
the cover can be made of fabric or other material.

For production, a minimum set of hand and mechanized tools is required:

Required materials for making a dressing room or children's clothing rack:

high-quality pine beams;
self-tapping screws for wood;
wood drills;
pine wood varnish and stain;
hand carpentry tools;
case.

Modern power tools are equipped with nozzles for suction of sawdust and dust from working area using a vacuum cleaner. At home, this option is very useful.

A set of blanks is now available. Prepare them in accordance with the dimensions according to the drawing. Compare symmetrical parts. They should be the same. Saw to size, sand flat surfaces with a grinder. Sand the curved ones with sandpaper. This is the most labor-intensive part of making a costume floor hanger. When sawing, you may find that the wood in the thickness of the solid is damp. In this case, it will be difficult to sand the surfaces. Such parts must be dried before finishing. room temperature. Depending on the level of humidity, the drying process may take several days.

Assembling a wardrobe floor suit hanger

This is the final stage of the process of making a floor hanger for clothes. All parts are made according to the drawing and the compliance of dimensions is checked, since they are all already marked on the manufactured parts. You should pay attention to the quality of the fasteners. That is, a choice of screws and self-tapping screws. General recommendations by choice of screws:

The length should not exceed two thicknesses of the parts being fastened. Otherwise, the screw will pierce the surface of the second part and everything will be ruined. On pine pieces, there is no need to drill a hole in the second piece being fastened;
Select the color of the screws in accordance with the color of the material coating;
Self-tapping screws must have a purpose for woodworking. The use of metal screws will significantly reduce the strength of the connection.

An important procedure is marking for drilling holes for fasteners. It is absolutely necessary to use the hole location markings. You need to mark the drilling location in such a way that the drill does not go awry. In this case, the strength of the connection between the parts will be insufficient.

The diameter of the hole that needs to be drilled for the mounting screws should be half the diameter of the screws themselves. The absence of holes can lead to splitting of the wood during the process of tightening the screw and the work will be ruined.

Tips for tightening screws with a screwdriver:

Do not screw the screw in completely. A screwdriver has a high torque and can turn a self-tapping screw in a material.
The final tightening of the fasteners should be done manually with a screwdriver so as not to turn the screw in the hole, since in this case the connection will lose strength.

When the floor hanger is assembled, it is sometimes necessary to varnish the joints with self-tapping screws. The screw heads should be level with the surface. These places should be sanded and varnished along with the screw head.

Features of children's floor clothes hangers

Apart from size, children's floor hangers are no different from adults. Thickness of parts for children's version may be reduced. Accordingly, the weight will be less, which will enable the child to move his children's hanger himself. The dimensions of a children's floor hanger should be selected taking into account the size of the child's clothing. Designs for girls and boys may vary. It is advisable to provide in the design the ability to hang hangers with clothes on a hanger and then cover them with a cover. To do this, you can adapt two metal hooks on which hangers will hang. The hooks can be placed on the back of the structure or on the sides.

Other options for floor hangers for suits and clothes

Figured wardrobe suit floor clothes rack

This option looks original, but when made at home, some difficulties may arise with the manufacture of curved parts. It is difficult to maintain symmetry when working with a jigsaw. Both parts need to be cut out by aligning and fastening the two blanks. The total thickness should not exceed the cutting depth parameter of the jigsaw. Modern household models are designed for a cutting depth of up to 70 mm, and this is quite enough. But this model is not suitable for shirts and blouses. That is, the possibilities of use are limited.

Mobile wardrobe suit rack on wheels

Another interesting model on wheels. The top of the design is topped with regular hangers, which is very convenient for placing a jacket, shirts and blouses. And it is convenient to hang trousers on the crossbars. Wheels are a good design feature, since a loaded hanger is more convenient to roll than to carry. A film or fabric cover will conveniently cover the hanger.

This model is produced by IKEA in Russia as a suit and wardrobe floor hanger.

It’s not difficult to make one with your own hands. Special fasteners will be required. As can be seen in the figure, the vertical posts must be attached to the base with metal screws. During manufacturing, you will need to carefully and accurately drill holes for screws in vertical racks. This is the only difficulty. Everything else is very easy to manufacture and assemble. The disadvantage is the need to disassemble the structure during transportation. You will have to unscrew the long bolts from the vertical posts.

Collapsible suit hanger rack floor in a rustic style

This hanger is more suitable for a hallway or corridor. You can put shoes under it. This model is quite difficult to make with your own hands. Holes required large diameter in intersecting round posts. In general, drill holes in round parts household tool very difficult. It's better not to try. To get around this unpleasant technological nuance you can take non-round square posts. Make holes using a special drill required diameter in square bars it is quite possible. It is recommended to use a metal crossbar. The wooden one will sag.

When we come home, the first thing we do is take off our outerwear and hang it in the closet or on a hanger. The latter option has some significant advantages: it takes up little space, provides quick access to things, is easy to install, and is suitable for corridors various forms and sizes.

Thanks to the simplicity of the design, it’s not at all difficult to build a hanger in the hallway with your own hands.

Advantages of self-production:

N low cost of the product;
IN opportunity to achieve the best combination with interior;
AND individuality of the hanger: your friends and acquaintances will not have one like this;
R academic work is highly valued.

Original wall hangers in the hallway are important and integral element interior

Before starting production, you need to analyze the shape of the corridor. If it is quite elongated, it is better to give preference to a long hanger with compact shelves or without them at all. For large rooms, you can choose any model.

It is also worth considering the features of the interior: style, details, predominant colors.

The simplest type of coat rack is a wooden board with hooks attached to the wall. It is allowed to have a shelf for hats, sides located above or below it. The basis of the design can be taken as a homogeneous large wooden plank, and several smaller ones, fastened together.

IN traditional version execution of a wall hanger is a bar on which hooks and pins are located.

If you want to show your creative potential, a custom model can be made. For example, you can make an excellent hanger for a nursery if you create a blank in the shape of a cloud, tree or twig. For the corridor, it would be better to cut out something else: antlers, a fence or an inscription.

Wall hangers in the hallway and coat hooks are selected according to the interior style of the room.

Materials and tools

Nowadays, in almost every hardware store, the buyer is provided with such a rich assortment that it is possible to purchase everything necessary to create a wooden hanger with your own hands in as soon as possible, will not be difficult.

DIY wall hanger for the hallway - simple work happy with the result.

To do this, you should buy or prepare the appropriate tools:

Jigsaw
Hacksaw;
Blowtorch;
Sandpaper;
Screwdriver or hammer;
Awl;
Pencil;
Roulette.

Tools that will come in handy at work.

Materials you will need:

A piece of wooden board;
Screws;
Hooks.

Materials for future hangers.

For decoration:

Primer;
Paint brush or roller;
Varnish or other coating;
Blanks for decoupage, scissors, glue, textured sponge.

Materials for decorating hangers.

The process of making a hanger

A classic hanger made by yourself for the hallway does not require significant effort. Manufacturing takes minimal time. Initially, you need to think through the design in detail; it is recommended to make a drawing on graph paper and calculate the consumption of materials.

You need to transfer the drawing using a pencil or marker.

Then you should get wood sheet(or board) and place it on stable supports so that there are a few centimeters between it and the surface of the floor or table. Armed with a jigsaw, cut out the blanks of the required shape, following the contour. If you want to make the edges embossed, you need to go over them with the same tool.

It is necessary to handle roughness, sand the cut areas and sand them.

Next step - giving the desired appearance. To fire the boards you will need blowtorch, which is successfully replaced by a gas burner. At this stage, you need to be careful not to injure your fingers or spoil the material. Then you need to get paint or varnish and cover all the sawn parts.

After drying, the product is assembled using screws.

The hinged method involves mounting small round metal strips called “ears”. Holes are drilled in them for fastening into dowels with screws. Moreover, reliability is determined by their length.

A DIY wall hanger can be attached in several ways.

Another, no less popular way is to do through holes. After they are created and processed, screws or nails with a long stem are passed through and the hanger is attached to the wall.

For fastening, as a rule, screws or small nails are used.

To complete the work you need to attach metal hangers. They can be arranged randomly, in one or several rows.

Fixation is possible with the following devices:

"Suckers";
Adhesive strip;
Magnets.

Such methods do not cause difficulties and take little time. In this case, the fastening is not very reliable and is only suitable for hats.

Any brave design options will favorably emphasize the relevance and originality of the interior.

Making a hanger from longitudinal and transverse boards

This design resembles a lattice and involves making a base attached to the wall from horizontally and vertically arranged elongated boards. In this case, two layers can be roughly distinguished: the first- with transverse arrangement, second- with longitudinal.

Drawing of a wall hanger with dimensions.

To create a wall hanger with your own hands, you will need to stock up on several long boards. It is better to give preference to lumber 10-20 cm wide and 1 m long. Having decided on the size, you should obtain the required number of blanks.

How to assemble a hanger.

After which it is necessary to process them so that there are no bulges, chips or roughness left, paying particular attention Special attention edges. Then you need to first lay out the first layer, maintaining parallelism and the same distance between the planks. If everything is satisfactory, it's time to move on to the second level. Armed with a screwdriver (or, if you don’t have one, a hammer), fix their position at the intersection points.

A simple hanger option for making yourself.

The hooks need to be attached to the top boards. If they have a vertical position, then it is better to place the hooks in the upper part in one row. For hanger, outer side which is formed by vertical planks, you can create several levels by attaching hooks to each of them.

Dimensions of hanger with shelf.

Decoration

You can complete the production by giving the product an original appearance. The most interesting surface will be if:

Before you begin applying the coating, you should clean the wood from traces of dust, dirt and grease.

DIY materials for decoupage hangers.

We need to prime our wooden hanger with white acrylic paint.

Glizal is a transparent paint that, with certain efforts, forms textured surface. Before starting work, you should dilute the glisal with water according to the instructions. Then the mixture is applied to the prepared workpiece and using textured sponge a pattern is created. You must act quickly, otherwise the coating will harden in half an hour. For artificial aging wood, a type of varnish called craquelure is used.

It is applied to a pre-painted surface, which as a result becomes covered with small cracks.

Decoupage allows you to create wooden crafts, suitable for any interior. Most often they resort to it when they want to get furniture with an antique effect and complex patterns. To decorate such a hanger, you will have to arm yourself with scissors and blanks with a pattern.

Having cut out paper patterns, it is better to lay them on the surface and evaluate how they will look.

If everything suits you- Spread the wrong side with glue, apply it to the wood and level it so that bubbles do not form later, then cover it with furniture varnish and leave until completely dry.

Which finishing varnish you choose is up to you. After the varnish has dried, screw the handles into place.

If you have artistic skills, you can apply a drawing acrylic paints. Initially, the background and large elements are created, then the details are drawn. To finish work better by application varnish and craquelure.